examples/l3fwd/main.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright(c) 2010-2021 Intel Corporation
   3  */
   4
   5 #include <stdio.h>
   6 #include <stdlib.h>
   7 #include <stdint.h>
   8 #include <inttypes.h>
   9 #include <sys/types.h>
  10 #include <string.h>
  11 #include <sys/queue.h>
  12 #include <stdarg.h>
  13 #include <errno.h>
  14 #include <getopt.h>
  15 #include <signal.h>
  16 #include <stdbool.h>
  17
  18 #include <rte_common.h>
  19 #include <rte_vect.h>
  20 #include <rte_byteorder.h>
  21 #include <rte_log.h>
  22 #include <rte_malloc.h>
  23 #include <rte_memory.h>
  24 #include <rte_memcpy.h>
  25 #include <rte_eal.h>
  26 #include <rte_launch.h>
  27 #include <rte_cycles.h>
  28 #include <rte_prefetch.h>
  29 #include <rte_lcore.h>
  30 #include <rte_per_lcore.h>
  31 #include <rte_branch_prediction.h>
  32 #include <rte_interrupts.h>
  33 #include <rte_random.h>
  34 #include <rte_debug.h>
  35 #include <rte_ether.h>
  36 #include <rte_mempool.h>
  37 #include <rte_mbuf.h>
  38 #include <rte_ip.h>
  39 #include <rte_tcp.h>
  40 #include <rte_udp.h>
  41 #include <rte_string_fns.h>
  42 #include <rte_cpuflags.h>
  43
  44 #include <cmdline_parse.h>
  45 #include <cmdline_parse_etheraddr.h>
  46
  47 #include "l3fwd.h"
  48 #include "l3fwd_event.h"
  49 #include "l3fwd_route.h"
  50
  51 #define MAX_TX_QUEUE_PER_PORT RTE_MAX_LCORE
  52 #define MAX_RX_QUEUE_PER_PORT 128
  53
  54 #define MAX_LCORE_PARAMS 1024
  55
  56 uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
  57 uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
  58
  59 /**< Ports set in promiscuous mode off by default. */
  60 static int promiscuous_on;
  61
  62 /* Select Longest-Prefix, Exact match, Forwarding Information Base or Access Control. */
  63 enum L3FWD_LOOKUP_MODE {
  64         L3FWD_LOOKUP_DEFAULT,
  65         L3FWD_LOOKUP_LPM,
  66         L3FWD_LOOKUP_EM,
  67         L3FWD_LOOKUP_FIB,
  68         L3FWD_LOOKUP_ACL
  69 };
  70 static enum L3FWD_LOOKUP_MODE lookup_mode;
  71
  72 /* Global variables. */
  73 static int numa_on = 1; /**< NUMA is enabled by default. */
  74 static int parse_ptype; /**< Parse packet type using rx callback, and */
  75                         /**< disabled by default */
  76 static int per_port_pool; /**< Use separate buffer pools per port; disabled */
  77                           /**< by default */
  78
  79 volatile bool force_quit;
  80
  81 /* ethernet addresses of ports */
  82 uint64_t dest_eth_addr[RTE_MAX_ETHPORTS];
  83 struct rte_ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
  84
  85 xmm_t val_eth[RTE_MAX_ETHPORTS];
  86
  87 /* mask of enabled ports */
  88 uint32_t enabled_port_mask;
  89
  90 /* Used only in exact match mode. */
  91 int ipv6; /**< ipv6 is false by default. */
  92 uint32_t hash_entry_number = HASH_ENTRY_NUMBER_DEFAULT;
  93
  94 struct lcore_conf lcore_conf[RTE_MAX_LCORE];
  95
  96 struct parm_cfg parm_config;
  97
  98 struct lcore_params {
  99         uint16_t port_id;
 100         uint8_t queue_id;
 101         uint8_t lcore_id;
 102 } __rte_cache_aligned;
 103
 104 static struct lcore_params lcore_params_array[MAX_LCORE_PARAMS];
 105 static struct lcore_params lcore_params_array_default[] = {
 106         {0, 0, 2},
 107         {0, 1, 2},
 108         {0, 2, 2},
 109         {1, 0, 2},
 110         {1, 1, 2},
 111         {1, 2, 2},
 112         {2, 0, 2},
 113         {3, 0, 3},
 114         {3, 1, 3},
 115 };
 116
 117 static struct lcore_params * lcore_params = lcore_params_array_default;
 118 static uint16_t nb_lcore_params = sizeof(lcore_params_array_default) /
 119                                 sizeof(lcore_params_array_default[0]);
 120
 121 static struct rte_eth_conf port_conf = {
 122         .rxmode = {
 123                 .mq_mode = RTE_ETH_MQ_RX_RSS,
 124                 .split_hdr_size = 0,
 125                 .offloads = RTE_ETH_RX_OFFLOAD_CHECKSUM,
 126         },
 127         .rx_adv_conf = {
 128                 .rss_conf = {
 129                         .rss_key = NULL,
 130                         .rss_hf = RTE_ETH_RSS_IP,
 131                 },
 132         },
 133         .txmode = {
 134                 .mq_mode = RTE_ETH_MQ_TX_NONE,
 135         },
 136 };
 137
 138 static uint32_t max_pkt_len;
 139
 140 static struct rte_mempool *pktmbuf_pool[RTE_MAX_ETHPORTS][NB_SOCKETS];
 141 static struct rte_mempool *vector_pool[RTE_MAX_ETHPORTS];
 142 static uint8_t lkp_per_socket[NB_SOCKETS];
 143
 144 struct l3fwd_lkp_mode {
 145         void  (*read_config_files)(void);
 146         void  (*setup)(int);
 147         int   (*check_ptype)(int);
 148         rte_rx_callback_fn cb_parse_ptype;
 149         int   (*main_loop)(void *);
 150         void* (*get_ipv4_lookup_struct)(int);
 151         void* (*get_ipv6_lookup_struct)(int);
 152         void  (*free_routes)(void);
 153 };
 154
 155 static struct l3fwd_lkp_mode l3fwd_lkp;
 156
 157 static struct l3fwd_lkp_mode l3fwd_em_lkp = {
 158         .read_config_files              = read_config_files_em,
 159         .setup                  = setup_hash,
 160         .check_ptype            = em_check_ptype,
 161         .cb_parse_ptype         = em_cb_parse_ptype,
 162         .main_loop              = em_main_loop,
 163         .get_ipv4_lookup_struct = em_get_ipv4_l3fwd_lookup_struct,
 164         .get_ipv6_lookup_struct = em_get_ipv6_l3fwd_lookup_struct,
 165         .free_routes                    = em_free_routes,
 166 };
 167
 168 static struct l3fwd_lkp_mode l3fwd_lpm_lkp = {
 169         .read_config_files              = read_config_files_lpm,
 170         .setup                  = setup_lpm,
 171         .check_ptype            = lpm_check_ptype,
 172         .cb_parse_ptype         = lpm_cb_parse_ptype,
 173         .main_loop              = lpm_main_loop,
 174         .get_ipv4_lookup_struct = lpm_get_ipv4_l3fwd_lookup_struct,
 175         .get_ipv6_lookup_struct = lpm_get_ipv6_l3fwd_lookup_struct,
 176         .free_routes                    = lpm_free_routes,
 177 };
 178
 179 static struct l3fwd_lkp_mode l3fwd_fib_lkp = {
 180         .read_config_files              = read_config_files_lpm,
 181         .setup                  = setup_fib,
 182         .check_ptype            = lpm_check_ptype,
 183         .cb_parse_ptype         = lpm_cb_parse_ptype,
 184         .main_loop              = fib_main_loop,
 185         .get_ipv4_lookup_struct = fib_get_ipv4_l3fwd_lookup_struct,
 186         .get_ipv6_lookup_struct = fib_get_ipv6_l3fwd_lookup_struct,
 187         .free_routes                    = lpm_free_routes,
 188 };
 189
 190 static struct l3fwd_lkp_mode l3fwd_acl_lkp = {
 191         .read_config_files              = read_config_files_acl,
 192         .setup                  = setup_acl,
 193         .check_ptype            = em_check_ptype,
 194         .cb_parse_ptype         = em_cb_parse_ptype,
 195         .main_loop              = acl_main_loop,
 196         .get_ipv4_lookup_struct = acl_get_ipv4_l3fwd_lookup_struct,
 197         .get_ipv6_lookup_struct = acl_get_ipv6_l3fwd_lookup_struct,
 198         .free_routes                    = acl_free_routes,
 199 };
 200
 201 /*
 202  * 198.18.0.0/16 are set aside for RFC2544 benchmarking (RFC5735).
 203  * 198.18.{0-15}.0/24 = Port {0-15}
 204  */
 205 const struct ipv4_l3fwd_route ipv4_l3fwd_route_array[] = {
 206         {RTE_IPV4(198, 18, 0, 0), 24, 0},
 207         {RTE_IPV4(198, 18, 1, 0), 24, 1},
 208         {RTE_IPV4(198, 18, 2, 0), 24, 2},
 209         {RTE_IPV4(198, 18, 3, 0), 24, 3},
 210         {RTE_IPV4(198, 18, 4, 0), 24, 4},
 211         {RTE_IPV4(198, 18, 5, 0), 24, 5},
 212         {RTE_IPV4(198, 18, 6, 0), 24, 6},
 213         {RTE_IPV4(198, 18, 7, 0), 24, 7},
 214         {RTE_IPV4(198, 18, 8, 0), 24, 8},
 215         {RTE_IPV4(198, 18, 9, 0), 24, 9},
 216         {RTE_IPV4(198, 18, 10, 0), 24, 10},
 217         {RTE_IPV4(198, 18, 11, 0), 24, 11},
 218         {RTE_IPV4(198, 18, 12, 0), 24, 12},
 219         {RTE_IPV4(198, 18, 13, 0), 24, 13},
 220         {RTE_IPV4(198, 18, 14, 0), 24, 14},
 221         {RTE_IPV4(198, 18, 15, 0), 24, 15},
 222 };
 223
 224 /*
 225  * 2001:200::/48 is IANA reserved range for IPv6 benchmarking (RFC5180).
 226  * 2001:200:0:{0-f}::/64 = Port {0-15}
 227  */
 228 const struct ipv6_l3fwd_route ipv6_l3fwd_route_array[] = {
 229         {{32, 1, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 0},
 230         {{32, 1, 2, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 1},
 231         {{32, 1, 2, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 2},
 232         {{32, 1, 2, 0, 0, 0, 0, 3, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 3},
 233         {{32, 1, 2, 0, 0, 0, 0, 4, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 4},
 234         {{32, 1, 2, 0, 0, 0, 0, 5, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 5},
 235         {{32, 1, 2, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 6},
 236         {{32, 1, 2, 0, 0, 0, 0, 7, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 7},
 237         {{32, 1, 2, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 8},
 238         {{32, 1, 2, 0, 0, 0, 0, 9, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 9},
 239         {{32, 1, 2, 0, 0, 0, 0, 10, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 10},
 240         {{32, 1, 2, 0, 0, 0, 0, 11, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 11},
 241         {{32, 1, 2, 0, 0, 0, 0, 12, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 12},
 242         {{32, 1, 2, 0, 0, 0, 0, 13, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 13},
 243         {{32, 1, 2, 0, 0, 0, 0, 14, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 14},
 244         {{32, 1, 2, 0, 0, 0, 0, 15, 0, 0, 0, 0, 0, 0, 0, 0}, 64, 15},
 245 };
 246
 247 /*
 248  * API's called during initialization to setup ACL/EM/LPM rules.
 249  */
 250 void
 251 l3fwd_set_rule_ipv4_name(const char *optarg)
 252 {
 253         parm_config.rule_ipv4_name = optarg;
 254 }
 255
 256 void
 257 l3fwd_set_rule_ipv6_name(const char *optarg)
 258 {
 259         parm_config.rule_ipv6_name = optarg;
 260 }
 261
 262 void
 263 l3fwd_set_alg(const char *optarg)
 264 {
 265         parm_config.alg = parse_acl_alg(optarg);
 266 }
 267
 268 /*
 269  * Setup lookup methods for forwarding.
 270  * Currently exact-match, longest-prefix-match and forwarding information
 271  * base are the supported ones.
 272  */
 273 static void
 274 setup_l3fwd_lookup_tables(void)
 275 {
 276         /* Setup HASH lookup functions. */
 277         if (lookup_mode == L3FWD_LOOKUP_EM)
 278                 l3fwd_lkp = l3fwd_em_lkp;
 279         /* Setup FIB lookup functions. */
 280         else if (lookup_mode == L3FWD_LOOKUP_FIB)
 281                 l3fwd_lkp = l3fwd_fib_lkp;
 282         /* Setup ACL lookup functions. */
 283         else if (lookup_mode == L3FWD_LOOKUP_ACL)
 284                 l3fwd_lkp = l3fwd_acl_lkp;
 285         /* Setup LPM lookup functions. */
 286         else
 287                 l3fwd_lkp = l3fwd_lpm_lkp;
 288 }
 289
 290 static int
 291 check_lcore_params(void)
 292 {
 293         uint8_t queue, lcore;
 294         uint16_t i;
 295         int socketid;
 296
 297         for (i = 0; i < nb_lcore_params; ++i) {
 298                 queue = lcore_params[i].queue_id;
 299                 if (queue >= MAX_RX_QUEUE_PER_PORT) {
 300                         printf("invalid queue number: %hhu\n", queue);
 301                         return -1;
 302                 }
 303                 lcore = lcore_params[i].lcore_id;
 304                 if (!rte_lcore_is_enabled(lcore)) {
 305                         printf("error: lcore %hhu is not enabled in lcore mask\n", lcore);
 306                         return -1;
 307                 }
 308                 if ((socketid = rte_lcore_to_socket_id(lcore) != 0) &&
 309                         (numa_on == 0)) {
 310                         printf("warning: lcore %hhu is on socket %d with numa off \n",
 311                                 lcore, socketid);
 312                 }
 313         }
 314         return 0;
 315 }
 316
 317 static int
 318 check_port_config(void)
 319 {
 320         uint16_t portid;
 321         uint16_t i;
 322
 323         for (i = 0; i < nb_lcore_params; ++i) {
 324                 portid = lcore_params[i].port_id;
 325                 if ((enabled_port_mask & (1 << portid)) == 0) {
 326                         printf("port %u is not enabled in port mask\n", portid);
 327                         return -1;
 328                 }
 329                 if (!rte_eth_dev_is_valid_port(portid)) {
 330                         printf("port %u is not present on the board\n", portid);
 331                         return -1;
 332                 }
 333         }
 334         return 0;
 335 }
 336
 337 static uint8_t
 338 get_port_n_rx_queues(const uint16_t port)
 339 {
 340         int queue = -1;
 341         uint16_t i;
 342
 343         for (i = 0; i < nb_lcore_params; ++i) {
 344                 if (lcore_params[i].port_id == port) {
 345                         if (lcore_params[i].queue_id == queue+1)
 346                                 queue = lcore_params[i].queue_id;
 347                         else
 348                                 rte_exit(EXIT_FAILURE, "queue ids of the port %d must be"
 349                                                 " in sequence and must start with 0\n",
 350                                                 lcore_params[i].port_id);
 351                 }
 352         }
 353         return (uint8_t)(++queue);
 354 }
 355
 356 static int
 357 init_lcore_rx_queues(void)
 358 {
 359         uint16_t i, nb_rx_queue;
 360         uint8_t lcore;
 361
 362         for (i = 0; i < nb_lcore_params; ++i) {
 363                 lcore = lcore_params[i].lcore_id;
 364                 nb_rx_queue = lcore_conf[lcore].n_rx_queue;
 365                 if (nb_rx_queue >= MAX_RX_QUEUE_PER_LCORE) {
 366                         printf("error: too many queues (%u) for lcore: %u\n",
 367                                 (unsigned)nb_rx_queue + 1, (unsigned)lcore);
 368                         return -1;
 369                 } else {
 370                         lcore_conf[lcore].rx_queue_list[nb_rx_queue].port_id =
 371                                 lcore_params[i].port_id;
 372                         lcore_conf[lcore].rx_queue_list[nb_rx_queue].queue_id =
 373                                 lcore_params[i].queue_id;
 374                         lcore_conf[lcore].n_rx_queue++;
 375                 }
 376         }
 377         return 0;
 378 }
 379
 380 /* display usage */
 381 static void
 382 print_usage(const char *prgname)
 383 {
 384         char alg[PATH_MAX];
 385
 386         usage_acl_alg(alg, sizeof(alg));
 387         fprintf(stderr, "%s [EAL options] --"
 388                 " -p PORTMASK"
 389                 "  --rule_ipv4=FILE"
 390                 "  --rule_ipv6=FILE"
 391                 " [-P]"
 392                 " [--lookup]"
 393                 " --config (port,queue,lcore)[,(port,queue,lcore)]"
 394                 " [--rx-queue-size NPKTS]"
 395                 " [--tx-queue-size NPKTS]"
 396                 " [--eth-dest=X,MM:MM:MM:MM:MM:MM]"
 397                 " [--max-pkt-len PKTLEN]"
 398                 " [--no-numa]"
 399                 " [--hash-entry-num]"
 400                 " [--ipv6]"
 401                 " [--parse-ptype]"
 402                 " [--per-port-pool]"
 403                 " [--mode]"
 404                 " [--eventq-sched]"
 405                 " [--event-vector [--event-vector-size SIZE] [--event-vector-tmo NS]]"
 406                 " [-E]"
 407                 " [-L]\n\n"
 408
 409                 "  -p PORTMASK: Hexadecimal bitmask of ports to configure\n"
 410                 "  -P : Enable promiscuous mode\n"
 411                 "  --lookup: Select the lookup method\n"
 412                 "            Default: lpm\n"
 413                 "            Accepted: em (Exact Match), lpm (Longest Prefix Match), fib (Forwarding Information Base),\n"
 414                 "                      acl (Access Control List)\n"
 415                 "  --config (port,queue,lcore): Rx queue configuration\n"
 416                 "  --rx-queue-size NPKTS: Rx queue size in decimal\n"
 417                 "            Default: %d\n"
 418                 "  --tx-queue-size NPKTS: Tx queue size in decimal\n"
 419                 "            Default: %d\n"
 420                 "  --eth-dest=X,MM:MM:MM:MM:MM:MM: Ethernet destination for port X\n"
 421                 "  --max-pkt-len PKTLEN: maximum packet length in decimal (64-9600)\n"
 422                 "  --no-numa: Disable numa awareness\n"
 423                 "  --hash-entry-num: Specify the hash entry number in hexadecimal to be setup\n"
 424                 "  --ipv6: Set if running ipv6 packets\n"
 425                 "  --parse-ptype: Set to use software to analyze packet type\n"
 426                 "  --per-port-pool: Use separate buffer pool per port\n"
 427                 "  --mode: Packet transfer mode for I/O, poll or eventdev\n"
 428                 "          Default mode = poll\n"
 429                 "  --eventq-sched: Event queue synchronization method\n"
 430                 "                  ordered, atomic or parallel.\n"
 431                 "                  Default: atomic\n"
 432                 "                  Valid only if --mode=eventdev\n"
 433                 "  --event-eth-rxqs: Number of ethernet RX queues per device.\n"
 434                 "                    Default: 1\n"
 435                 "                    Valid only if --mode=eventdev\n"
 436                 "  --event-vector:  Enable event vectorization.\n"
 437                 "  --event-vector-size: Max vector size if event vectorization is enabled.\n"
 438                 "  --event-vector-tmo: Max timeout to form vector in nanoseconds if event vectorization is enabled\n"
 439                 "  -E : Enable exact match, legacy flag please use --lookup=em instead\n"
 440                 "  -L : Enable longest prefix match, legacy flag please use --lookup=lpm instead\n"
 441                 "  --rule_ipv4=FILE: Specify the ipv4 rules entries file.\n"
 442                 "                    Each rule occupies one line.\n"
 443                 "                    2 kinds of rules are supported.\n"
 444                 "                    One is ACL entry at while line leads with character '%c',\n"
 445                 "                    another is route entry at while line leads with character '%c'.\n"
 446                 "  --rule_ipv6=FILE: Specify the ipv6 rules entries file.\n"
 447                 "  --alg: ACL classify method to use, one of: %s.\n\n",
 448                 prgname, RTE_TEST_RX_DESC_DEFAULT, RTE_TEST_TX_DESC_DEFAULT,
 449                 ACL_LEAD_CHAR, ROUTE_LEAD_CHAR, alg);
 450 }
 451
 452 static int
 453 parse_max_pkt_len(const char *pktlen)
 454 {
 455         char *end = NULL;
 456         unsigned long len;
 457
 458         /* parse decimal string */
 459         len = strtoul(pktlen, &end, 10);
 460         if ((pktlen[0] == '\0') || (end == NULL) || (*end != '\0'))
 461                 return -1;
 462
 463         if (len == 0)
 464                 return -1;
 465
 466         return len;
 467 }
 468
 469 static int
 470 parse_portmask(const char *portmask)
 471 {
 472         char *end = NULL;
 473         unsigned long pm;
 474
 475         /* parse hexadecimal string */
 476         pm = strtoul(portmask, &end, 16);
 477         if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
 478                 return 0;
 479
 480         return pm;
 481 }
 482
 483 static int
 484 parse_hash_entry_number(const char *hash_entry_num)
 485 {
 486         char *end = NULL;
 487         unsigned long hash_en;
 488         /* parse hexadecimal string */
 489         hash_en = strtoul(hash_entry_num, &end, 16);
 490         if ((hash_entry_num[0] == '\0') || (end == NULL) || (*end != '\0'))
 491                 return -1;
 492
 493         if (hash_en == 0)
 494                 return -1;
 495
 496         return hash_en;
 497 }
 498
 499 static int
 500 parse_config(const char *q_arg)
 501 {
 502         char s[256];
 503         const char *p, *p0 = q_arg;
 504         char *end;
 505         enum fieldnames {
 506                 FLD_PORT = 0,
 507                 FLD_QUEUE,
 508                 FLD_LCORE,
 509                 _NUM_FLD
 510         };
 511         unsigned long int_fld[_NUM_FLD];
 512         char *str_fld[_NUM_FLD];
 513         int i;
 514         unsigned size;
 515
 516         nb_lcore_params = 0;
 517
 518         while ((p = strchr(p0,'(')) != NULL) {
 519                 ++p;
 520                 if((p0 = strchr(p,')')) == NULL)
 521                         return -1;
 522
 523                 size = p0 - p;
 524                 if(size >= sizeof(s))
 525                         return -1;
 526
 527                 snprintf(s, sizeof(s), "%.*s", size, p);
 528                 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
 529                         return -1;
 530                 for (i = 0; i < _NUM_FLD; i++){
 531                         errno = 0;
 532                         int_fld[i] = strtoul(str_fld[i], &end, 0);
 533                         if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
 534                                 return -1;
 535                 }
 536                 if (nb_lcore_params >= MAX_LCORE_PARAMS) {
 537                         printf("exceeded max number of lcore params: %hu\n",
 538                                 nb_lcore_params);
 539                         return -1;
 540                 }
 541                 lcore_params_array[nb_lcore_params].port_id =
 542                         (uint8_t)int_fld[FLD_PORT];
 543                 lcore_params_array[nb_lcore_params].queue_id =
 544                         (uint8_t)int_fld[FLD_QUEUE];
 545                 lcore_params_array[nb_lcore_params].lcore_id =
 546                         (uint8_t)int_fld[FLD_LCORE];
 547                 ++nb_lcore_params;
 548         }
 549         lcore_params = lcore_params_array;
 550         return 0;
 551 }
 552
 553 static void
 554 parse_eth_dest(const char *optarg)
 555 {
 556         uint16_t portid;
 557         char *port_end;
 558         uint8_t c, *dest, peer_addr[6];
 559
 560         errno = 0;
 561         portid = strtoul(optarg, &port_end, 10);
 562         if (errno != 0 || port_end == optarg || *port_end++ != ',')
 563                 rte_exit(EXIT_FAILURE,
 564                 "Invalid eth-dest: %s", optarg);
 565         if (portid >= RTE_MAX_ETHPORTS)
 566                 rte_exit(EXIT_FAILURE,
 567                 "eth-dest: port %d >= RTE_MAX_ETHPORTS(%d)\n",
 568                 portid, RTE_MAX_ETHPORTS);
 569
 570         if (cmdline_parse_etheraddr(NULL, port_end,
 571                 &peer_addr, sizeof(peer_addr)) < 0)
 572                 rte_exit(EXIT_FAILURE,
 573                 "Invalid ethernet address: %s\n",
 574                 port_end);
 575         dest = (uint8_t *)&dest_eth_addr[portid];
 576         for (c = 0; c < 6; c++)
 577                 dest[c] = peer_addr[c];
 578         *(uint64_t *)(val_eth + portid) = dest_eth_addr[portid];
 579 }
 580
 581 static void
 582 parse_mode(const char *optarg)
 583 {
 584         struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
 585
 586         if (!strcmp(optarg, "poll"))
 587                 evt_rsrc->enabled = false;
 588         else if (!strcmp(optarg, "eventdev"))
 589                 evt_rsrc->enabled = true;
 590 }
 591
 592 static void
 593 parse_queue_size(const char *queue_size_arg, uint16_t *queue_size, int rx)
 594 {
 595         char *end = NULL;
 596         unsigned long value;
 597
 598         /* parse decimal string */
 599         value = strtoul(queue_size_arg, &end, 10);
 600         if ((queue_size_arg[0] == '\0') || (end == NULL) ||
 601                 (*end != '\0') || (value == 0)) {
 602                 if (rx == 1)
 603                         rte_exit(EXIT_FAILURE, "Invalid rx-queue-size\n");
 604                 else
 605                         rte_exit(EXIT_FAILURE, "Invalid tx-queue-size\n");
 606
 607                 return;
 608         }
 609
 610         if (value > UINT16_MAX) {
 611                 if (rx == 1)
 612                         rte_exit(EXIT_FAILURE, "rx-queue-size %lu > %d\n",
 613                                 value, UINT16_MAX);
 614                 else
 615                         rte_exit(EXIT_FAILURE, "tx-queue-size %lu > %d\n",
 616                                 value, UINT16_MAX);
 617
 618                 return;
 619         }
 620
 621         *queue_size = value;
 622 }
 623
 624 static void
 625 parse_eventq_sched(const char *optarg)
 626 {
 627         struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
 628
 629         if (!strcmp(optarg, "ordered"))
 630                 evt_rsrc->sched_type = RTE_SCHED_TYPE_ORDERED;
 631         if (!strcmp(optarg, "atomic"))
 632                 evt_rsrc->sched_type = RTE_SCHED_TYPE_ATOMIC;
 633         if (!strcmp(optarg, "parallel"))
 634                 evt_rsrc->sched_type = RTE_SCHED_TYPE_PARALLEL;
 635 }
 636
 637 static void
 638 parse_event_eth_rx_queues(const char *eth_rx_queues)
 639 {
 640         struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
 641         char *end = NULL;
 642         uint8_t num_eth_rx_queues;
 643
 644         /* parse decimal string */
 645         num_eth_rx_queues = strtoul(eth_rx_queues, &end, 10);
 646         if ((eth_rx_queues[0] == '\0') || (end == NULL) || (*end != '\0'))
 647                 return;
 648
 649         if (num_eth_rx_queues == 0)
 650                 return;
 651
 652         evt_rsrc->eth_rx_queues = num_eth_rx_queues;
 653 }
 654
 655 static int
 656 parse_lookup(const char *optarg)
 657 {
 658         if (!strcmp(optarg, "em"))
 659                 lookup_mode = L3FWD_LOOKUP_EM;
 660         else if (!strcmp(optarg, "lpm"))
 661                 lookup_mode = L3FWD_LOOKUP_LPM;
 662         else if (!strcmp(optarg, "fib"))
 663                 lookup_mode = L3FWD_LOOKUP_FIB;
 664         else if (!strcmp(optarg, "acl"))
 665                 lookup_mode = L3FWD_LOOKUP_ACL;
 666         else {
 667                 fprintf(stderr, "Invalid lookup option! Accepted options: acl, em, lpm, fib\n");
 668                 return -1;
 669         }
 670         return 0;
 671 }
 672
 673 #define MAX_JUMBO_PKT_LEN  9600
 674
 675 static const char short_options[] =
 676         "p:"  /* portmask */
 677         "P"   /* promiscuous */
 678         "L"   /* legacy enable long prefix match */
 679         "E"   /* legacy enable exact match */
 680         ;
 681
 682 #define CMD_LINE_OPT_CONFIG "config"
 683 #define CMD_LINE_OPT_RX_QUEUE_SIZE "rx-queue-size"
 684 #define CMD_LINE_OPT_TX_QUEUE_SIZE "tx-queue-size"
 685 #define CMD_LINE_OPT_ETH_DEST "eth-dest"
 686 #define CMD_LINE_OPT_NO_NUMA "no-numa"
 687 #define CMD_LINE_OPT_IPV6 "ipv6"
 688 #define CMD_LINE_OPT_MAX_PKT_LEN "max-pkt-len"
 689 #define CMD_LINE_OPT_HASH_ENTRY_NUM "hash-entry-num"
 690 #define CMD_LINE_OPT_PARSE_PTYPE "parse-ptype"
 691 #define CMD_LINE_OPT_PER_PORT_POOL "per-port-pool"
 692 #define CMD_LINE_OPT_MODE "mode"
 693 #define CMD_LINE_OPT_EVENTQ_SYNC "eventq-sched"
 694 #define CMD_LINE_OPT_EVENT_ETH_RX_QUEUES "event-eth-rxqs"
 695 #define CMD_LINE_OPT_LOOKUP "lookup"
 696 #define CMD_LINE_OPT_ENABLE_VECTOR "event-vector"
 697 #define CMD_LINE_OPT_VECTOR_SIZE "event-vector-size"
 698 #define CMD_LINE_OPT_VECTOR_TMO_NS "event-vector-tmo"
 699 #define CMD_LINE_OPT_RULE_IPV4 "rule_ipv4"
 700 #define CMD_LINE_OPT_RULE_IPV6 "rule_ipv6"
 701 #define CMD_LINE_OPT_ALG "alg"
 702
 703 enum {
 704         /* long options mapped to a short option */
 705
 706         /* first long only option value must be >= 256, so that we won't
 707          * conflict with short options */
 708         CMD_LINE_OPT_MIN_NUM = 256,
 709         CMD_LINE_OPT_CONFIG_NUM,
 710         CMD_LINE_OPT_RX_QUEUE_SIZE_NUM,
 711         CMD_LINE_OPT_TX_QUEUE_SIZE_NUM,
 712         CMD_LINE_OPT_ETH_DEST_NUM,
 713         CMD_LINE_OPT_NO_NUMA_NUM,
 714         CMD_LINE_OPT_IPV6_NUM,
 715         CMD_LINE_OPT_MAX_PKT_LEN_NUM,
 716         CMD_LINE_OPT_HASH_ENTRY_NUM_NUM,
 717         CMD_LINE_OPT_PARSE_PTYPE_NUM,
 718         CMD_LINE_OPT_RULE_IPV4_NUM,
 719         CMD_LINE_OPT_RULE_IPV6_NUM,
 720         CMD_LINE_OPT_ALG_NUM,
 721         CMD_LINE_OPT_PARSE_PER_PORT_POOL,
 722         CMD_LINE_OPT_MODE_NUM,
 723         CMD_LINE_OPT_EVENTQ_SYNC_NUM,
 724         CMD_LINE_OPT_EVENT_ETH_RX_QUEUES_NUM,
 725         CMD_LINE_OPT_LOOKUP_NUM,
 726         CMD_LINE_OPT_ENABLE_VECTOR_NUM,
 727         CMD_LINE_OPT_VECTOR_SIZE_NUM,
 728         CMD_LINE_OPT_VECTOR_TMO_NS_NUM
 729 };
 730
 731 static const struct option lgopts[] = {
 732         {CMD_LINE_OPT_CONFIG, 1, 0, CMD_LINE_OPT_CONFIG_NUM},
 733         {CMD_LINE_OPT_RX_QUEUE_SIZE, 1, 0, CMD_LINE_OPT_RX_QUEUE_SIZE_NUM},
 734         {CMD_LINE_OPT_TX_QUEUE_SIZE, 1, 0, CMD_LINE_OPT_TX_QUEUE_SIZE_NUM},
 735         {CMD_LINE_OPT_ETH_DEST, 1, 0, CMD_LINE_OPT_ETH_DEST_NUM},
 736         {CMD_LINE_OPT_NO_NUMA, 0, 0, CMD_LINE_OPT_NO_NUMA_NUM},
 737         {CMD_LINE_OPT_IPV6, 0, 0, CMD_LINE_OPT_IPV6_NUM},
 738         {CMD_LINE_OPT_MAX_PKT_LEN, 1, 0, CMD_LINE_OPT_MAX_PKT_LEN_NUM},
 739         {CMD_LINE_OPT_HASH_ENTRY_NUM, 1, 0, CMD_LINE_OPT_HASH_ENTRY_NUM_NUM},
 740         {CMD_LINE_OPT_PARSE_PTYPE, 0, 0, CMD_LINE_OPT_PARSE_PTYPE_NUM},
 741         {CMD_LINE_OPT_PER_PORT_POOL, 0, 0, CMD_LINE_OPT_PARSE_PER_PORT_POOL},
 742         {CMD_LINE_OPT_MODE, 1, 0, CMD_LINE_OPT_MODE_NUM},
 743         {CMD_LINE_OPT_EVENTQ_SYNC, 1, 0, CMD_LINE_OPT_EVENTQ_SYNC_NUM},
 744         {CMD_LINE_OPT_EVENT_ETH_RX_QUEUES, 1, 0,
 745                                         CMD_LINE_OPT_EVENT_ETH_RX_QUEUES_NUM},
 746         {CMD_LINE_OPT_LOOKUP, 1, 0, CMD_LINE_OPT_LOOKUP_NUM},
 747         {CMD_LINE_OPT_ENABLE_VECTOR, 0, 0, CMD_LINE_OPT_ENABLE_VECTOR_NUM},
 748         {CMD_LINE_OPT_VECTOR_SIZE, 1, 0, CMD_LINE_OPT_VECTOR_SIZE_NUM},
 749         {CMD_LINE_OPT_VECTOR_TMO_NS, 1, 0, CMD_LINE_OPT_VECTOR_TMO_NS_NUM},
 750         {CMD_LINE_OPT_RULE_IPV4,   1, 0, CMD_LINE_OPT_RULE_IPV4_NUM},
 751         {CMD_LINE_OPT_RULE_IPV6,   1, 0, CMD_LINE_OPT_RULE_IPV6_NUM},
 752         {CMD_LINE_OPT_ALG,   1, 0, CMD_LINE_OPT_ALG_NUM},
 753         {NULL, 0, 0, 0}
 754 };
 755
 756 /*
 757  * This expression is used to calculate the number of mbufs needed
 758  * depending on user input, taking  into account memory for rx and
 759  * tx hardware rings, cache per lcore and mtable per port per lcore.
 760  * RTE_MAX is used to ensure that NB_MBUF never goes below a minimum
 761  * value of 8192
 762  */
 763 #define NB_MBUF(nports) RTE_MAX(        \
 764         (nports*nb_rx_queue*nb_rxd +            \
 765         nports*nb_lcores*MAX_PKT_BURST +        \
 766         nports*n_tx_queue*nb_txd +              \
 767         nb_lcores*MEMPOOL_CACHE_SIZE),          \
 768         (unsigned)8192)
 769
 770 /* Parse the argument given in the command line of the application */
 771 static int
 772 parse_args(int argc, char **argv)
 773 {
 774         int opt, ret;
 775         char **argvopt;
 776         int option_index;
 777         char *prgname = argv[0];
 778         uint8_t lcore_params = 0;
 779         uint8_t eventq_sched = 0;
 780         uint8_t eth_rx_q = 0;
 781         struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
 782
 783         argvopt = argv;
 784
 785         /* Error or normal output strings. */
 786         while ((opt = getopt_long(argc, argvopt, short_options,
 787                                 lgopts, &option_index)) != EOF) {
 788
 789                 switch (opt) {
 790                 /* portmask */
 791                 case 'p':
 792                         enabled_port_mask = parse_portmask(optarg);
 793                         if (enabled_port_mask == 0) {
 794                                 fprintf(stderr, "Invalid portmask\n");
 795                                 print_usage(prgname);
 796                                 return -1;
 797                         }
 798                         break;
 799
 800                 case 'P':
 801                         promiscuous_on = 1;
 802                         break;
 803
 804                 case 'E':
 805                         if (lookup_mode != L3FWD_LOOKUP_DEFAULT) {
 806                                 fprintf(stderr, "Only one lookup mode is allowed at a time!\n");
 807                                 return -1;
 808                         }
 809                         lookup_mode = L3FWD_LOOKUP_EM;
 810                         break;
 811
 812                 case 'L':
 813                         if (lookup_mode != L3FWD_LOOKUP_DEFAULT) {
 814                                 fprintf(stderr, "Only one lookup mode is allowed at a time!\n");
 815                                 return -1;
 816                         }
 817                         lookup_mode = L3FWD_LOOKUP_LPM;
 818                         break;
 819
 820                 /* long options */
 821                 case CMD_LINE_OPT_CONFIG_NUM:
 822                         ret = parse_config(optarg);
 823                         if (ret) {
 824                                 fprintf(stderr, "Invalid config\n");
 825                                 print_usage(prgname);
 826                                 return -1;
 827                         }
 828                         lcore_params = 1;
 829                         break;
 830
 831                 case CMD_LINE_OPT_RX_QUEUE_SIZE_NUM:
 832                         parse_queue_size(optarg, &nb_rxd, 1);
 833                         break;
 834
 835                 case CMD_LINE_OPT_TX_QUEUE_SIZE_NUM:
 836                         parse_queue_size(optarg, &nb_txd, 0);
 837                         break;
 838
 839                 case CMD_LINE_OPT_ETH_DEST_NUM:
 840                         parse_eth_dest(optarg);
 841                         break;
 842
 843                 case CMD_LINE_OPT_NO_NUMA_NUM:
 844                         numa_on = 0;
 845                         break;
 846
 847                 case CMD_LINE_OPT_IPV6_NUM:
 848                         ipv6 = 1;
 849                         break;
 850
 851                 case CMD_LINE_OPT_MAX_PKT_LEN_NUM:
 852                         max_pkt_len = parse_max_pkt_len(optarg);
 853                         break;
 854
 855                 case CMD_LINE_OPT_HASH_ENTRY_NUM_NUM:
 856                         ret = parse_hash_entry_number(optarg);
 857                         if ((ret > 0) && (ret <= L3FWD_HASH_ENTRIES)) {
 858                                 hash_entry_number = ret;
 859                         } else {
 860                                 fprintf(stderr, "invalid hash entry number\n");
 861                                 print_usage(prgname);
 862                                 return -1;
 863                         }
 864                         break;
 865
 866                 case CMD_LINE_OPT_PARSE_PTYPE_NUM:
 867                         printf("soft parse-ptype is enabled\n");
 868                         parse_ptype = 1;
 869                         break;
 870
 871                 case CMD_LINE_OPT_PARSE_PER_PORT_POOL:
 872                         printf("per port buffer pool is enabled\n");
 873                         per_port_pool = 1;
 874                         break;
 875
 876                 case CMD_LINE_OPT_MODE_NUM:
 877                         parse_mode(optarg);
 878                         break;
 879
 880                 case CMD_LINE_OPT_EVENTQ_SYNC_NUM:
 881                         parse_eventq_sched(optarg);
 882                         eventq_sched = 1;
 883                         break;
 884
 885                 case CMD_LINE_OPT_EVENT_ETH_RX_QUEUES_NUM:
 886                         parse_event_eth_rx_queues(optarg);
 887                         eth_rx_q = 1;
 888                         break;
 889
 890                 case CMD_LINE_OPT_LOOKUP_NUM:
 891                         if (lookup_mode != L3FWD_LOOKUP_DEFAULT) {
 892                                 fprintf(stderr, "Only one lookup mode is allowed at a time!\n");
 893                                 return -1;
 894                         }
 895                         ret = parse_lookup(optarg);
 896                         /*
 897                          * If parse_lookup was passed an invalid lookup type
 898                          * then return -1. Error log included within
 899                          * parse_lookup for simplicity.
 900                          */
 901                         if (ret)
 902                                 return -1;
 903                         break;
 904
 905                 case CMD_LINE_OPT_ENABLE_VECTOR_NUM:
 906                         printf("event vectorization is enabled\n");
 907                         evt_rsrc->vector_enabled = 1;
 908                         break;
 909                 case CMD_LINE_OPT_VECTOR_SIZE_NUM:
 910                         evt_rsrc->vector_size = strtol(optarg, NULL, 10);
 911                         break;
 912                 case CMD_LINE_OPT_VECTOR_TMO_NS_NUM:
 913                         evt_rsrc->vector_tmo_ns = strtoull(optarg, NULL, 10);
 914                         break;
 915                 case CMD_LINE_OPT_RULE_IPV4_NUM:
 916                         l3fwd_set_rule_ipv4_name(optarg);
 917                         break;
 918                 case CMD_LINE_OPT_RULE_IPV6_NUM:
 919                         l3fwd_set_rule_ipv6_name(optarg);
 920                         break;
 921                 case CMD_LINE_OPT_ALG_NUM:
 922                         l3fwd_set_alg(optarg);
 923                         break;
 924                 default:
 925                         print_usage(prgname);
 926                         return -1;
 927                 }
 928         }
 929
 930         if (evt_rsrc->enabled && lcore_params) {
 931                 fprintf(stderr, "lcore config is not valid when event mode is selected\n");
 932                 return -1;
 933         }
 934
 935         if (!evt_rsrc->enabled && eth_rx_q) {
 936                 fprintf(stderr, "eth_rx_queues is valid only when event mode is selected\n");
 937                 return -1;
 938         }
 939
 940         if (!evt_rsrc->enabled && eventq_sched) {
 941                 fprintf(stderr, "eventq_sched is valid only when event mode is selected\n");
 942                 return -1;
 943         }
 944
 945         if (evt_rsrc->vector_enabled && !evt_rsrc->vector_size) {
 946                 evt_rsrc->vector_size = VECTOR_SIZE_DEFAULT;
 947                 fprintf(stderr, "vector size set to default (%" PRIu16 ")\n",
 948                         evt_rsrc->vector_size);
 949         }
 950
 951         if (evt_rsrc->vector_enabled && !evt_rsrc->vector_tmo_ns) {
 952                 evt_rsrc->vector_tmo_ns = VECTOR_TMO_NS_DEFAULT;
 953                 fprintf(stderr,
 954                         "vector timeout set to default (%" PRIu64 " ns)\n",
 955                         evt_rsrc->vector_tmo_ns);
 956         }
 957
 958         /*
 959          * Nothing is selected, pick longest-prefix match
 960          * as default match.
 961          */
 962         if (lookup_mode == L3FWD_LOOKUP_DEFAULT) {
 963                 fprintf(stderr, "Neither ACL, LPM, EM, or FIB selected, defaulting to LPM\n");
 964                 lookup_mode = L3FWD_LOOKUP_LPM;
 965         }
 966
 967         /*
 968          * ipv6 and hash flags are valid only for
 969          * exact match, reset them to default for
 970          * longest-prefix match.
 971          */
 972         if (lookup_mode == L3FWD_LOOKUP_LPM) {
 973                 ipv6 = 0;
 974                 hash_entry_number = HASH_ENTRY_NUMBER_DEFAULT;
 975         }
 976
 977         /* For ACL, update port config rss hash filter */
 978         if (lookup_mode == L3FWD_LOOKUP_ACL) {
 979                 port_conf.rx_adv_conf.rss_conf.rss_hf |=
 980                                 RTE_ETH_RSS_UDP | RTE_ETH_RSS_TCP | RTE_ETH_RSS_SCTP;
 981         }
 982
 983         if (optind >= 0)
 984                 argv[optind-1] = prgname;
 985
 986         ret = optind-1;
 987         optind = 1; /* reset getopt lib */
 988         return ret;
 989 }
 990
 991 static void
 992 print_ethaddr(const char *name, const struct rte_ether_addr *eth_addr)
 993 {
 994         char buf[RTE_ETHER_ADDR_FMT_SIZE];
 995         rte_ether_format_addr(buf, RTE_ETHER_ADDR_FMT_SIZE, eth_addr);
 996         printf("%s%s", name, buf);
 997 }
 998
 999 int
1000 init_mem(uint16_t portid, unsigned int nb_mbuf)
1001 {
1002         struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
1003         struct lcore_conf *qconf;
1004         int socketid;
1005         unsigned lcore_id;
1006         char s[64];
1007
1008         for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
1009                 if (rte_lcore_is_enabled(lcore_id) == 0)
1010                         continue;
1011
1012                 if (numa_on)
1013                         socketid = rte_lcore_to_socket_id(lcore_id);
1014                 else
1015                         socketid = 0;
1016
1017                 if (socketid >= NB_SOCKETS) {
1018                         rte_exit(EXIT_FAILURE,
1019                                 "Socket %d of lcore %u is out of range %d\n",
1020                                 socketid, lcore_id, NB_SOCKETS);
1021                 }
1022
1023                 if (pktmbuf_pool[portid][socketid] == NULL) {
1024                         snprintf(s, sizeof(s), "mbuf_pool_%d:%d",
1025                                  portid, socketid);
1026                         pktmbuf_pool[portid][socketid] =
1027                                 rte_pktmbuf_pool_create(s, nb_mbuf,
1028                                         MEMPOOL_CACHE_SIZE, 0,
1029                                         RTE_MBUF_DEFAULT_BUF_SIZE, socketid);
1030                         if (pktmbuf_pool[portid][socketid] == NULL)
1031                                 rte_exit(EXIT_FAILURE,
1032                                         "Cannot init mbuf pool on socket %d\n",
1033                                         socketid);
1034                         else
1035                                 printf("Allocated mbuf pool on socket %d\n",
1036                                         socketid);
1037
1038                         /* Setup ACL, LPM, EM(f.e Hash) or FIB. But, only once per
1039                          * available socket.
1040                          */
1041                         if (!lkp_per_socket[socketid]) {
1042                                 l3fwd_lkp.setup(socketid);
1043                                 lkp_per_socket[socketid] = 1;
1044                         }
1045                 }
1046
1047                 if (evt_rsrc->vector_enabled && vector_pool[portid] == NULL) {
1048                         unsigned int nb_vec;
1049
1050                         nb_vec = (nb_mbuf + evt_rsrc->vector_size - 1) /
1051                                  evt_rsrc->vector_size;
1052                         nb_vec = RTE_MAX(512U, nb_vec);
1053                         nb_vec += rte_lcore_count() * 32;
1054                         snprintf(s, sizeof(s), "vector_pool_%d", portid);
1055                         vector_pool[portid] = rte_event_vector_pool_create(
1056                                 s, nb_vec, 32, evt_rsrc->vector_size, socketid);
1057                         if (vector_pool[portid] == NULL)
1058                                 rte_exit(EXIT_FAILURE,
1059                                          "Failed to create vector pool for port %d\n",
1060                                          portid);
1061                         else
1062                                 printf("Allocated vector pool for port %d\n",
1063                                        portid);
1064                 }
1065
1066                 qconf = &lcore_conf[lcore_id];
1067                 qconf->ipv4_lookup_struct =
1068                         l3fwd_lkp.get_ipv4_lookup_struct(socketid);
1069                 qconf->ipv6_lookup_struct =
1070                         l3fwd_lkp.get_ipv6_lookup_struct(socketid);
1071         }
1072         return 0;
1073 }
1074
1075 /* Check the link status of all ports in up to 9s, and print them finally */
1076 static void
1077 check_all_ports_link_status(uint32_t port_mask)
1078 {
1079 #define CHECK_INTERVAL 100 /* 100ms */
1080 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
1081         uint16_t portid;
1082         uint8_t count, all_ports_up, print_flag = 0;
1083         struct rte_eth_link link;
1084         int ret;
1085         char link_status_text[RTE_ETH_LINK_MAX_STR_LEN];
1086
1087         printf("\nChecking link status");
1088         fflush(stdout);
1089         for (count = 0; count <= MAX_CHECK_TIME; count++) {
1090                 if (force_quit)
1091                         return;
1092                 all_ports_up = 1;
1093                 RTE_ETH_FOREACH_DEV(portid) {
1094                         if (force_quit)
1095                                 return;
1096                         if ((port_mask & (1 << portid)) == 0)
1097                                 continue;
1098                         memset(&link, 0, sizeof(link));
1099                         ret = rte_eth_link_get_nowait(portid, &link);
1100                         if (ret < 0) {
1101                                 all_ports_up = 0;
1102                                 if (print_flag == 1)
1103                                         printf("Port %u link get failed: %s\n",
1104                                                 portid, rte_strerror(-ret));
1105                                 continue;
1106                         }
1107                         /* print link status if flag set */
1108                         if (print_flag == 1) {
1109                                 rte_eth_link_to_str(link_status_text,
1110                                         sizeof(link_status_text), &link);
1111                                 printf("Port %d %s\n", portid,
1112                                        link_status_text);
1113                                 continue;
1114                         }
1115                         /* clear all_ports_up flag if any link down */
1116                         if (link.link_status == RTE_ETH_LINK_DOWN) {
1117                                 all_ports_up = 0;
1118                                 break;
1119                         }
1120                 }
1121                 /* after finally printing all link status, get out */
1122                 if (print_flag == 1)
1123                         break;
1124
1125                 if (all_ports_up == 0) {
1126                         printf(".");
1127                         fflush(stdout);
1128                         rte_delay_ms(CHECK_INTERVAL);
1129                 }
1130
1131                 /* set the print_flag if all ports up or timeout */
1132                 if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
1133                         print_flag = 1;
1134                         printf("done\n");
1135                 }
1136         }
1137 }
1138
1139 static void
1140 signal_handler(int signum)
1141 {
1142         if (signum == SIGINT || signum == SIGTERM) {
1143                 printf("\n\nSignal %d received, preparing to exit...\n",
1144                                 signum);
1145                 force_quit = true;
1146         }
1147 }
1148
1149 static int
1150 prepare_ptype_parser(uint16_t portid, uint16_t queueid)
1151 {
1152         if (parse_ptype) {
1153                 printf("Port %d: softly parse packet type info\n", portid);
1154                 if (rte_eth_add_rx_callback(portid, queueid,
1155                                             l3fwd_lkp.cb_parse_ptype,
1156                                             NULL))
1157                         return 1;
1158
1159                 printf("Failed to add rx callback: port=%d\n", portid);
1160                 return 0;
1161         }
1162
1163         if (l3fwd_lkp.check_ptype(portid))
1164                 return 1;
1165
1166         printf("port %d cannot parse packet type, please add --%s\n",
1167                portid, CMD_LINE_OPT_PARSE_PTYPE);
1168         return 0;
1169 }
1170
1171 static uint32_t
1172 eth_dev_get_overhead_len(uint32_t max_rx_pktlen, uint16_t max_mtu)
1173 {
1174         uint32_t overhead_len;
1175
1176         if (max_mtu != UINT16_MAX && max_rx_pktlen > max_mtu)
1177                 overhead_len = max_rx_pktlen - max_mtu;
1178         else
1179                 overhead_len = RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
1180
1181         return overhead_len;
1182 }
1183
1184 static int
1185 config_port_max_pkt_len(struct rte_eth_conf *conf,
1186                 struct rte_eth_dev_info *dev_info)
1187 {
1188         uint32_t overhead_len;
1189
1190         if (max_pkt_len == 0)
1191                 return 0;
1192
1193         if (max_pkt_len < RTE_ETHER_MIN_LEN || max_pkt_len > MAX_JUMBO_PKT_LEN)
1194                 return -1;
1195
1196         overhead_len = eth_dev_get_overhead_len(dev_info->max_rx_pktlen,
1197                         dev_info->max_mtu);
1198         conf->rxmode.mtu = max_pkt_len - overhead_len;
1199
1200         if (conf->rxmode.mtu > RTE_ETHER_MTU)
1201                 conf->txmode.offloads |= RTE_ETH_TX_OFFLOAD_MULTI_SEGS;
1202
1203         return 0;
1204 }
1205
1206 static void
1207 l3fwd_poll_resource_setup(void)
1208 {
1209         uint8_t nb_rx_queue, queue, socketid;
1210         struct rte_eth_dev_info dev_info;
1211         uint32_t n_tx_queue, nb_lcores;
1212         struct rte_eth_txconf *txconf;
1213         struct lcore_conf *qconf;
1214         uint16_t queueid, portid;
1215         unsigned int nb_ports;
1216         unsigned int lcore_id;
1217         int ret;
1218
1219         if (check_lcore_params() < 0)
1220                 rte_exit(EXIT_FAILURE, "check_lcore_params failed\n");
1221
1222         ret = init_lcore_rx_queues();
1223         if (ret < 0)
1224                 rte_exit(EXIT_FAILURE, "init_lcore_rx_queues failed\n");
1225
1226         nb_ports = rte_eth_dev_count_avail();
1227
1228         if (check_port_config() < 0)
1229                 rte_exit(EXIT_FAILURE, "check_port_config failed\n");
1230
1231         nb_lcores = rte_lcore_count();
1232
1233         /* initialize all ports */
1234         RTE_ETH_FOREACH_DEV(portid) {
1235                 struct rte_eth_conf local_port_conf = port_conf;
1236
1237                 /* skip ports that are not enabled */
1238                 if ((enabled_port_mask & (1 << portid)) == 0) {
1239                         printf("\nSkipping disabled port %d\n", portid);
1240                         continue;
1241                 }
1242
1243                 /* init port */
1244                 printf("Initializing port %d ... ", portid );
1245                 fflush(stdout);
1246
1247                 nb_rx_queue = get_port_n_rx_queues(portid);
1248                 n_tx_queue = nb_lcores;
1249                 if (n_tx_queue > MAX_TX_QUEUE_PER_PORT)
1250                         n_tx_queue = MAX_TX_QUEUE_PER_PORT;
1251                 printf("Creating queues: nb_rxq=%d nb_txq=%u... ",
1252                         nb_rx_queue, (unsigned)n_tx_queue );
1253
1254                 ret = rte_eth_dev_info_get(portid, &dev_info);
1255                 if (ret != 0)
1256                         rte_exit(EXIT_FAILURE,
1257                                 "Error during getting device (port %u) info: %s\n",
1258                                 portid, strerror(-ret));
1259
1260                 ret = config_port_max_pkt_len(&local_port_conf, &dev_info);
1261                 if (ret != 0)
1262                         rte_exit(EXIT_FAILURE,
1263                                 "Invalid max packet length: %u (port %u)\n",
1264                                 max_pkt_len, portid);
1265
1266                 if (dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE)
1267                         local_port_conf.txmode.offloads |=
1268                                 RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE;
1269
1270                 local_port_conf.rx_adv_conf.rss_conf.rss_hf &=
1271                         dev_info.flow_type_rss_offloads;
1272
1273                 if (dev_info.max_rx_queues == 1)
1274                         local_port_conf.rxmode.mq_mode = RTE_ETH_MQ_RX_NONE;
1275
1276                 if (local_port_conf.rx_adv_conf.rss_conf.rss_hf !=
1277                                 port_conf.rx_adv_conf.rss_conf.rss_hf) {
1278                         printf("Port %u modified RSS hash function based on hardware support,"
1279                                 "requested:%#"PRIx64" configured:%#"PRIx64"\n",
1280                                 portid,
1281                                 port_conf.rx_adv_conf.rss_conf.rss_hf,
1282                                 local_port_conf.rx_adv_conf.rss_conf.rss_hf);
1283                 }
1284
1285                 ret = rte_eth_dev_configure(portid, nb_rx_queue,
1286                                         (uint16_t)n_tx_queue, &local_port_conf);
1287                 if (ret < 0)
1288                         rte_exit(EXIT_FAILURE,
1289                                 "Cannot configure device: err=%d, port=%d\n",
1290                                 ret, portid);
1291
1292                 ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd,
1293                                                        &nb_txd);
1294                 if (ret < 0)
1295                         rte_exit(EXIT_FAILURE,
1296                                  "Cannot adjust number of descriptors: err=%d, "
1297                                  "port=%d\n", ret, portid);
1298
1299                 ret = rte_eth_macaddr_get(portid, &ports_eth_addr[portid]);
1300                 if (ret < 0)
1301                         rte_exit(EXIT_FAILURE,
1302                                  "Cannot get MAC address: err=%d, port=%d\n",
1303                                  ret, portid);
1304
1305                 print_ethaddr(" Address:", &ports_eth_addr[portid]);
1306                 printf(", ");
1307                 print_ethaddr("Destination:",
1308                         (const struct rte_ether_addr *)&dest_eth_addr[portid]);
1309                 printf(", ");
1310
1311                 /*
1312                  * prepare src MACs for each port.
1313                  */
1314                 rte_ether_addr_copy(&ports_eth_addr[portid],
1315                         (struct rte_ether_addr *)(val_eth + portid) + 1);
1316
1317                 /* init memory */
1318                 if (!per_port_pool) {
1319                         /* portid = 0; this is *not* signifying the first port,
1320                          * rather, it signifies that portid is ignored.
1321                          */
1322                         ret = init_mem(0, NB_MBUF(nb_ports));
1323                 } else {
1324                         ret = init_mem(portid, NB_MBUF(1));
1325                 }
1326                 if (ret < 0)
1327                         rte_exit(EXIT_FAILURE, "init_mem failed\n");
1328
1329                 /* init one TX queue per couple (lcore,port) */
1330                 queueid = 0;
1331                 for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
1332                         if (rte_lcore_is_enabled(lcore_id) == 0)
1333                                 continue;
1334
1335                         if (numa_on)
1336                                 socketid =
1337                                 (uint8_t)rte_lcore_to_socket_id(lcore_id);
1338                         else
1339                                 socketid = 0;
1340
1341                         printf("txq=%u,%d,%d ", lcore_id, queueid, socketid);
1342                         fflush(stdout);
1343
1344                         txconf = &dev_info.default_txconf;
1345                         txconf->offloads = local_port_conf.txmode.offloads;
1346                         ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
1347                                                      socketid, txconf);
1348                         if (ret < 0)
1349                                 rte_exit(EXIT_FAILURE,
1350                                         "rte_eth_tx_queue_setup: err=%d, "
1351                                         "port=%d\n", ret, portid);
1352
1353                         qconf = &lcore_conf[lcore_id];
1354                         qconf->tx_queue_id[portid] = queueid;
1355                         queueid++;
1356
1357                         qconf->tx_port_id[qconf->n_tx_port] = portid;
1358                         qconf->n_tx_port++;
1359                 }
1360                 printf("\n");
1361         }
1362
1363         for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
1364                 if (rte_lcore_is_enabled(lcore_id) == 0)
1365                         continue;
1366                 qconf = &lcore_conf[lcore_id];
1367                 printf("\nInitializing rx queues on lcore %u ... ", lcore_id );
1368                 fflush(stdout);
1369                 /* init RX queues */
1370                 for(queue = 0; queue < qconf->n_rx_queue; ++queue) {
1371                         struct rte_eth_rxconf rxq_conf;
1372
1373                         portid = qconf->rx_queue_list[queue].port_id;
1374                         queueid = qconf->rx_queue_list[queue].queue_id;
1375
1376                         if (numa_on)
1377                                 socketid =
1378                                 (uint8_t)rte_lcore_to_socket_id(lcore_id);
1379                         else
1380                                 socketid = 0;
1381
1382                         printf("rxq=%d,%d,%d ", portid, queueid, socketid);
1383                         fflush(stdout);
1384
1385                         ret = rte_eth_dev_info_get(portid, &dev_info);
1386                         if (ret != 0)
1387                                 rte_exit(EXIT_FAILURE,
1388                                         "Error during getting device (port %u) info: %s\n",
1389                                         portid, strerror(-ret));
1390
1391                         rxq_conf = dev_info.default_rxconf;
1392                         rxq_conf.offloads = port_conf.rxmode.offloads;
1393                         if (!per_port_pool)
1394                                 ret = rte_eth_rx_queue_setup(portid, queueid,
1395                                                 nb_rxd, socketid,
1396                                                 &rxq_conf,
1397                                                 pktmbuf_pool[0][socketid]);
1398                         else
1399                                 ret = rte_eth_rx_queue_setup(portid, queueid,
1400                                                 nb_rxd, socketid,
1401                                                 &rxq_conf,
1402                                                 pktmbuf_pool[portid][socketid]);
1403                         if (ret < 0)
1404                                 rte_exit(EXIT_FAILURE,
1405                                 "rte_eth_rx_queue_setup: err=%d, port=%d\n",
1406                                 ret, portid);
1407                 }
1408         }
1409 }
1410
1411 static inline int
1412 l3fwd_service_enable(uint32_t service_id)
1413 {
1414         uint8_t min_service_count = UINT8_MAX;
1415         uint32_t slcore_array[RTE_MAX_LCORE];
1416         unsigned int slcore = 0;
1417         uint8_t service_count;
1418         int32_t slcore_count;
1419
1420         if (!rte_service_lcore_count())
1421                 return -ENOENT;
1422
1423         slcore_count = rte_service_lcore_list(slcore_array, RTE_MAX_LCORE);
1424         if (slcore_count < 0)
1425                 return -ENOENT;
1426         /* Get the core which has least number of services running. */
1427         while (slcore_count--) {
1428                 /* Reset default mapping */
1429                 if (rte_service_map_lcore_set(service_id,
1430                                 slcore_array[slcore_count], 0) != 0)
1431                         return -ENOENT;
1432                 service_count = rte_service_lcore_count_services(
1433                                 slcore_array[slcore_count]);
1434                 if (service_count < min_service_count) {
1435                         slcore = slcore_array[slcore_count];
1436                         min_service_count = service_count;
1437                 }
1438         }
1439         if (rte_service_map_lcore_set(service_id, slcore, 1))
1440                 return -ENOENT;
1441         rte_service_lcore_start(slcore);
1442
1443         return 0;
1444 }
1445
1446 static void
1447 l3fwd_event_service_setup(void)
1448 {
1449         struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
1450         struct rte_event_dev_info evdev_info;
1451         uint32_t service_id, caps;
1452         int ret, i;
1453
1454         rte_event_dev_info_get(evt_rsrc->event_d_id, &evdev_info);
1455         if (!(evdev_info.event_dev_cap & RTE_EVENT_DEV_CAP_DISTRIBUTED_SCHED)) {
1456                 ret = rte_event_dev_service_id_get(evt_rsrc->event_d_id,
1457                                 &service_id);
1458                 if (ret != -ESRCH && ret != 0)
1459                         rte_exit(EXIT_FAILURE,
1460                                  "Error in starting eventdev service\n");
1461                 l3fwd_service_enable(service_id);
1462         }
1463
1464         for (i = 0; i < evt_rsrc->rx_adptr.nb_rx_adptr; i++) {
1465                 ret = rte_event_eth_rx_adapter_caps_get(evt_rsrc->event_d_id,
1466                                 evt_rsrc->rx_adptr.rx_adptr[i], &caps);
1467                 if (ret < 0)
1468                         rte_exit(EXIT_FAILURE,
1469                                  "Failed to get Rx adapter[%d] caps\n",
1470                                  evt_rsrc->rx_adptr.rx_adptr[i]);
1471                 ret = rte_event_eth_rx_adapter_service_id_get(
1472                                 evt_rsrc->event_d_id,
1473                                 &service_id);
1474                 if (ret != -ESRCH && ret != 0)
1475                         rte_exit(EXIT_FAILURE,
1476                                  "Error in starting Rx adapter[%d] service\n",
1477                                  evt_rsrc->rx_adptr.rx_adptr[i]);
1478                 l3fwd_service_enable(service_id);
1479         }
1480
1481         for (i = 0; i < evt_rsrc->tx_adptr.nb_tx_adptr; i++) {
1482                 ret = rte_event_eth_tx_adapter_caps_get(evt_rsrc->event_d_id,
1483                                 evt_rsrc->tx_adptr.tx_adptr[i], &caps);
1484                 if (ret < 0)
1485                         rte_exit(EXIT_FAILURE,
1486                                  "Failed to get Rx adapter[%d] caps\n",
1487                                  evt_rsrc->tx_adptr.tx_adptr[i]);
1488                 ret = rte_event_eth_tx_adapter_service_id_get(
1489                                 evt_rsrc->event_d_id,
1490                                 &service_id);
1491                 if (ret != -ESRCH && ret != 0)
1492                         rte_exit(EXIT_FAILURE,
1493                                  "Error in starting Rx adapter[%d] service\n",
1494                                  evt_rsrc->tx_adptr.tx_adptr[i]);
1495                 l3fwd_service_enable(service_id);
1496         }
1497 }
1498
1499 int
1500 main(int argc, char **argv)
1501 {
1502         struct l3fwd_event_resources *evt_rsrc;
1503         struct lcore_conf *qconf;
1504         uint16_t queueid, portid;
1505         unsigned int lcore_id;
1506         uint8_t queue;
1507         int i, ret;
1508
1509         /* init EAL */
1510         ret = rte_eal_init(argc, argv);
1511         if (ret < 0)
1512                 rte_exit(EXIT_FAILURE, "Invalid EAL parameters\n");
1513         argc -= ret;
1514         argv += ret;
1515
1516         force_quit = false;
1517         signal(SIGINT, signal_handler);
1518         signal(SIGTERM, signal_handler);
1519
1520         /* pre-init dst MACs for all ports to 02:00:00:00:00:xx */
1521         for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
1522                 dest_eth_addr[portid] =
1523                         RTE_ETHER_LOCAL_ADMIN_ADDR + ((uint64_t)portid << 40);
1524                 *(uint64_t *)(val_eth + portid) = dest_eth_addr[portid];
1525         }
1526
1527         evt_rsrc = l3fwd_get_eventdev_rsrc();
1528         /* parse application arguments (after the EAL ones) */
1529         ret = parse_args(argc, argv);
1530         if (ret < 0)
1531                 rte_exit(EXIT_FAILURE, "Invalid L3FWD parameters\n");
1532
1533         /* Setup function pointers for lookup method. */
1534         setup_l3fwd_lookup_tables();
1535
1536         /* Add the config file rules */
1537         l3fwd_lkp.read_config_files();
1538
1539         evt_rsrc->per_port_pool = per_port_pool;
1540         evt_rsrc->pkt_pool = pktmbuf_pool;
1541         evt_rsrc->vec_pool = vector_pool;
1542         evt_rsrc->port_mask = enabled_port_mask;
1543         /* Configure eventdev parameters if user has requested */
1544         if (evt_rsrc->enabled) {
1545                 l3fwd_event_resource_setup(&port_conf);
1546                 if (lookup_mode == L3FWD_LOOKUP_EM)
1547                         l3fwd_lkp.main_loop = evt_rsrc->ops.em_event_loop;
1548                 else if (lookup_mode == L3FWD_LOOKUP_FIB)
1549                         l3fwd_lkp.main_loop = evt_rsrc->ops.fib_event_loop;
1550                 else
1551                         l3fwd_lkp.main_loop = evt_rsrc->ops.lpm_event_loop;
1552                 l3fwd_event_service_setup();
1553         } else
1554                 l3fwd_poll_resource_setup();
1555
1556         /* start ports */
1557         RTE_ETH_FOREACH_DEV(portid) {
1558                 if ((enabled_port_mask & (1 << portid)) == 0) {
1559                         continue;
1560                 }
1561                 /* Start device */
1562                 ret = rte_eth_dev_start(portid);
1563                 if (ret < 0)
1564                         rte_exit(EXIT_FAILURE,
1565                                 "rte_eth_dev_start: err=%d, port=%d\n",
1566                                 ret, portid);
1567
1568                 /*
1569                  * If enabled, put device in promiscuous mode.
1570                  * This allows IO forwarding mode to forward packets
1571                  * to itself through 2 cross-connected  ports of the
1572                  * target machine.
1573                  */
1574                 if (promiscuous_on) {
1575                         ret = rte_eth_promiscuous_enable(portid);
1576                         if (ret != 0)
1577                                 rte_exit(EXIT_FAILURE,
1578                                         "rte_eth_promiscuous_enable: err=%s, port=%u\n",
1579                                         rte_strerror(-ret), portid);
1580                 }
1581         }
1582
1583         printf("\n");
1584
1585         for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
1586                 if (rte_lcore_is_enabled(lcore_id) == 0)
1587                         continue;
1588                 qconf = &lcore_conf[lcore_id];
1589                 for (queue = 0; queue < qconf->n_rx_queue; ++queue) {
1590                         portid = qconf->rx_queue_list[queue].port_id;
1591                         queueid = qconf->rx_queue_list[queue].queue_id;
1592                         if (prepare_ptype_parser(portid, queueid) == 0)
1593                                 rte_exit(EXIT_FAILURE, "ptype check fails\n");
1594                 }
1595         }
1596
1597         check_all_ports_link_status(enabled_port_mask);
1598
1599         ret = 0;
1600         /* launch per-lcore init on every lcore */
1601         rte_eal_mp_remote_launch(l3fwd_lkp.main_loop, NULL, CALL_MAIN);
1602         if (evt_rsrc->enabled) {
1603                 for (i = 0; i < evt_rsrc->rx_adptr.nb_rx_adptr; i++)
1604                         rte_event_eth_rx_adapter_stop(
1605                                         evt_rsrc->rx_adptr.rx_adptr[i]);
1606                 for (i = 0; i < evt_rsrc->tx_adptr.nb_tx_adptr; i++)
1607                         rte_event_eth_tx_adapter_stop(
1608                                         evt_rsrc->tx_adptr.tx_adptr[i]);
1609
1610                 RTE_ETH_FOREACH_DEV(portid) {
1611                         if ((enabled_port_mask & (1 << portid)) == 0)
1612                                 continue;
1613                         ret = rte_eth_dev_stop(portid);
1614                         if (ret != 0)
1615                                 printf("rte_eth_dev_stop: err=%d, port=%u\n",
1616                                        ret, portid);
1617                 }
1618
1619                 rte_eal_mp_wait_lcore();
1620                 RTE_ETH_FOREACH_DEV(portid) {
1621                         if ((enabled_port_mask & (1 << portid)) == 0)
1622                                 continue;
1623                         rte_eth_dev_close(portid);
1624                 }
1625
1626                 rte_event_dev_stop(evt_rsrc->event_d_id);
1627                 rte_event_dev_close(evt_rsrc->event_d_id);
1628
1629         } else {
1630                 rte_eal_mp_wait_lcore();
1631
1632                 RTE_ETH_FOREACH_DEV(portid) {
1633                         if ((enabled_port_mask & (1 << portid)) == 0)
1634                                 continue;
1635                         printf("Closing port %d...", portid);
1636                         ret = rte_eth_dev_stop(portid);
1637                         if (ret != 0)
1638                                 printf("rte_eth_dev_stop: err=%d, port=%u\n",
1639                                        ret, portid);
1640                         rte_eth_dev_close(portid);
1641                         printf(" Done\n");
1642                 }
1643         }
1644
1645         /* clean up config file routes */
1646         l3fwd_lkp.free_routes();
1647
1648         /* clean up the EAL */
1649         rte_eal_cleanup();
1650
1651         printf("Bye...\n");
1652
1653         return ret;
1654 }