4 * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
11 * * Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * * Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in
15 * the documentation and/or other materials provided with the
17 * * Neither the name of Intel Corporation nor the names of its
18 * contributors may be used to endorse or promote products derived
19 * from this software without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
38 #include <sys/types.h>
40 #include <sys/queue.h>
45 #include <rte_common.h>
46 #include <rte_byteorder.h>
48 #include <rte_memory.h>
49 #include <rte_memcpy.h>
50 #include <rte_memzone.h>
52 #include <rte_per_lcore.h>
53 #include <rte_launch.h>
54 #include <rte_atomic.h>
55 #include <rte_cycles.h>
56 #include <rte_prefetch.h>
57 #include <rte_lcore.h>
58 #include <rte_per_lcore.h>
59 #include <rte_branch_prediction.h>
60 #include <rte_interrupts.h>
62 #include <rte_random.h>
63 #include <rte_debug.h>
64 #include <rte_ether.h>
65 #include <rte_ethdev.h>
67 #include <rte_mempool.h>
69 #include <rte_string_fns.h>
76 static struct rte_eth_conf port_conf = {
78 .mq_mode = ETH_MQ_RX_RSS,
80 .header_split = 0, /**< Header Split disabled */
81 .hw_ip_checksum = 1, /**< IP checksum offload enabled */
82 .hw_vlan_filter = 0, /**< VLAN filtering disabled */
83 .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
84 .hw_strip_crc = 0, /**< CRC stripped by hardware */
93 .mq_mode = ETH_MQ_TX_NONE,
98 app_assign_worker_ids(void)
100 uint32_t lcore, worker_id;
102 /* Assign ID for each worker */
104 for (lcore = 0; lcore < APP_MAX_LCORES; lcore ++) {
105 struct app_lcore_params_worker *lp_worker = &app.lcore_params[lcore].worker;
107 if (app.lcore_params[lcore].type != e_APP_LCORE_WORKER) {
111 lp_worker->worker_id = worker_id;
117 app_init_mbuf_pools(void)
119 unsigned socket, lcore;
121 /* Init the buffer pools */
122 for (socket = 0; socket < APP_MAX_SOCKETS; socket ++) {
124 if (app_is_socket_used(socket) == 0) {
128 snprintf(name, sizeof(name), "mbuf_pool_%u", socket);
129 printf("Creating the mbuf pool for socket %u ...\n", socket);
130 app.pools[socket] = rte_pktmbuf_pool_create(
131 name, APP_DEFAULT_MEMPOOL_BUFFERS,
132 APP_DEFAULT_MEMPOOL_CACHE_SIZE,
133 0, APP_DEFAULT_MBUF_DATA_SIZE, socket);
134 if (app.pools[socket] == NULL) {
135 rte_panic("Cannot create mbuf pool on socket %u\n", socket);
139 for (lcore = 0; lcore < APP_MAX_LCORES; lcore ++) {
140 if (app.lcore_params[lcore].type == e_APP_LCORE_DISABLED) {
144 socket = rte_lcore_to_socket_id(lcore);
145 app.lcore_params[lcore].pool = app.pools[socket];
150 app_init_lpm_tables(void)
152 unsigned socket, lcore;
154 /* Init the LPM tables */
155 for (socket = 0; socket < APP_MAX_SOCKETS; socket ++) {
159 if (app_is_socket_used(socket) == 0) {
163 struct rte_lpm_config lpm_config;
165 lpm_config.max_rules = APP_MAX_LPM_RULES;
166 lpm_config.number_tbl8s = 256;
167 lpm_config.flags = 0;
168 snprintf(name, sizeof(name), "lpm_table_%u", socket);
169 printf("Creating the LPM table for socket %u ...\n", socket);
170 app.lpm_tables[socket] = rte_lpm_create(
174 if (app.lpm_tables[socket] == NULL) {
175 rte_panic("Unable to create LPM table on socket %u\n", socket);
178 for (rule = 0; rule < app.n_lpm_rules; rule ++) {
181 ret = rte_lpm_add(app.lpm_tables[socket],
182 app.lpm_rules[rule].ip,
183 app.lpm_rules[rule].depth,
184 app.lpm_rules[rule].if_out);
187 rte_panic("Unable to add entry %u (%x/%u => %u) to the LPM table on socket %u (%d)\n",
189 (unsigned) app.lpm_rules[rule].ip,
190 (unsigned) app.lpm_rules[rule].depth,
191 (unsigned) app.lpm_rules[rule].if_out,
199 for (lcore = 0; lcore < APP_MAX_LCORES; lcore ++) {
200 if (app.lcore_params[lcore].type != e_APP_LCORE_WORKER) {
204 socket = rte_lcore_to_socket_id(lcore);
205 app.lcore_params[lcore].worker.lpm_table = app.lpm_tables[socket];
210 app_init_rings_rx(void)
214 /* Initialize the rings for the RX side */
215 for (lcore = 0; lcore < APP_MAX_LCORES; lcore ++) {
216 struct app_lcore_params_io *lp_io = &app.lcore_params[lcore].io;
217 unsigned socket_io, lcore_worker;
219 if ((app.lcore_params[lcore].type != e_APP_LCORE_IO) ||
220 (lp_io->rx.n_nic_queues == 0)) {
224 socket_io = rte_lcore_to_socket_id(lcore);
226 for (lcore_worker = 0; lcore_worker < APP_MAX_LCORES; lcore_worker ++) {
228 struct app_lcore_params_worker *lp_worker = &app.lcore_params[lcore_worker].worker;
229 struct rte_ring *ring = NULL;
231 if (app.lcore_params[lcore_worker].type != e_APP_LCORE_WORKER) {
235 printf("Creating ring to connect I/O lcore %u (socket %u) with worker lcore %u ...\n",
239 snprintf(name, sizeof(name), "app_ring_rx_s%u_io%u_w%u",
243 ring = rte_ring_create(
247 RING_F_SP_ENQ | RING_F_SC_DEQ);
249 rte_panic("Cannot create ring to connect I/O core %u with worker core %u\n",
254 lp_io->rx.rings[lp_io->rx.n_rings] = ring;
255 lp_io->rx.n_rings ++;
257 lp_worker->rings_in[lp_worker->n_rings_in] = ring;
258 lp_worker->n_rings_in ++;
262 for (lcore = 0; lcore < APP_MAX_LCORES; lcore ++) {
263 struct app_lcore_params_io *lp_io = &app.lcore_params[lcore].io;
265 if ((app.lcore_params[lcore].type != e_APP_LCORE_IO) ||
266 (lp_io->rx.n_nic_queues == 0)) {
270 if (lp_io->rx.n_rings != app_get_lcores_worker()) {
271 rte_panic("Algorithmic error (I/O RX rings)\n");
275 for (lcore = 0; lcore < APP_MAX_LCORES; lcore ++) {
276 struct app_lcore_params_worker *lp_worker = &app.lcore_params[lcore].worker;
278 if (app.lcore_params[lcore].type != e_APP_LCORE_WORKER) {
282 if (lp_worker->n_rings_in != app_get_lcores_io_rx()) {
283 rte_panic("Algorithmic error (worker input rings)\n");
289 app_init_rings_tx(void)
293 /* Initialize the rings for the TX side */
294 for (lcore = 0; lcore < APP_MAX_LCORES; lcore ++) {
295 struct app_lcore_params_worker *lp_worker = &app.lcore_params[lcore].worker;
298 if (app.lcore_params[lcore].type != e_APP_LCORE_WORKER) {
302 for (port = 0; port < APP_MAX_NIC_PORTS; port ++) {
304 struct app_lcore_params_io *lp_io = NULL;
305 struct rte_ring *ring;
306 uint32_t socket_io, lcore_io;
308 if (app.nic_tx_port_mask[port] == 0) {
312 if (app_get_lcore_for_nic_tx((uint8_t) port, &lcore_io) < 0) {
313 rte_panic("Algorithmic error (no I/O core to handle TX of port %u)\n",
317 lp_io = &app.lcore_params[lcore_io].io;
318 socket_io = rte_lcore_to_socket_id(lcore_io);
320 printf("Creating ring to connect worker lcore %u with TX port %u (through I/O lcore %u) (socket %u) ...\n",
321 lcore, port, (unsigned)lcore_io, (unsigned)socket_io);
322 snprintf(name, sizeof(name), "app_ring_tx_s%u_w%u_p%u", socket_io, lcore, port);
323 ring = rte_ring_create(
327 RING_F_SP_ENQ | RING_F_SC_DEQ);
329 rte_panic("Cannot create ring to connect worker core %u with TX port %u\n",
334 lp_worker->rings_out[port] = ring;
335 lp_io->tx.rings[port][lp_worker->worker_id] = ring;
339 for (lcore = 0; lcore < APP_MAX_LCORES; lcore ++) {
340 struct app_lcore_params_io *lp_io = &app.lcore_params[lcore].io;
343 if ((app.lcore_params[lcore].type != e_APP_LCORE_IO) ||
344 (lp_io->tx.n_nic_ports == 0)) {
348 for (i = 0; i < lp_io->tx.n_nic_ports; i ++){
351 port = lp_io->tx.nic_ports[i];
352 for (j = 0; j < app_get_lcores_worker(); j ++) {
353 if (lp_io->tx.rings[port][j] == NULL) {
354 rte_panic("Algorithmic error (I/O TX rings)\n");
361 /* Check the link status of all ports in up to 9s, and print them finally */
363 check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
365 #define CHECK_INTERVAL 100 /* 100ms */
366 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
367 uint8_t portid, count, all_ports_up, print_flag = 0;
368 struct rte_eth_link link;
369 uint32_t n_rx_queues, n_tx_queues;
371 printf("\nChecking link status");
373 for (count = 0; count <= MAX_CHECK_TIME; count++) {
375 for (portid = 0; portid < port_num; portid++) {
376 if ((port_mask & (1 << portid)) == 0)
378 n_rx_queues = app_get_nic_rx_queues_per_port(portid);
379 n_tx_queues = app.nic_tx_port_mask[portid];
380 if ((n_rx_queues == 0) && (n_tx_queues == 0))
382 memset(&link, 0, sizeof(link));
383 rte_eth_link_get_nowait(portid, &link);
384 /* print link status if flag set */
385 if (print_flag == 1) {
386 if (link.link_status)
387 printf("Port %d Link Up - speed %u "
388 "Mbps - %s\n", (uint8_t)portid,
389 (unsigned)link.link_speed,
390 (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
391 ("full-duplex") : ("half-duplex\n"));
393 printf("Port %d Link Down\n",
397 /* clear all_ports_up flag if any link down */
398 if (link.link_status == ETH_LINK_DOWN) {
403 /* after finally printing all link status, get out */
407 if (all_ports_up == 0) {
410 rte_delay_ms(CHECK_INTERVAL);
413 /* set the print_flag if all ports up or timeout */
414 if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
428 uint32_t n_rx_queues, n_tx_queues;
430 /* Init NIC ports and queues, then start the ports */
431 for (port = 0; port < APP_MAX_NIC_PORTS; port ++) {
432 struct rte_mempool *pool;
434 n_rx_queues = app_get_nic_rx_queues_per_port(port);
435 n_tx_queues = app.nic_tx_port_mask[port];
437 if ((n_rx_queues == 0) && (n_tx_queues == 0)) {
442 printf("Initializing NIC port %u ...\n", (unsigned) port);
443 ret = rte_eth_dev_configure(
445 (uint8_t) n_rx_queues,
446 (uint8_t) n_tx_queues,
449 rte_panic("Cannot init NIC port %u (%d)\n", (unsigned) port, ret);
451 rte_eth_promiscuous_enable(port);
454 for (queue = 0; queue < APP_MAX_RX_QUEUES_PER_NIC_PORT; queue ++) {
455 if (app.nic_rx_queue_mask[port][queue] == 0) {
459 app_get_lcore_for_nic_rx(port, queue, &lcore);
460 socket = rte_lcore_to_socket_id(lcore);
461 pool = app.lcore_params[lcore].pool;
463 printf("Initializing NIC port %u RX queue %u ...\n",
466 ret = rte_eth_rx_queue_setup(
469 (uint16_t) app.nic_rx_ring_size,
474 rte_panic("Cannot init RX queue %u for port %u (%d)\n",
482 if (app.nic_tx_port_mask[port] == 1) {
483 app_get_lcore_for_nic_tx(port, &lcore);
484 socket = rte_lcore_to_socket_id(lcore);
485 printf("Initializing NIC port %u TX queue 0 ...\n",
487 ret = rte_eth_tx_queue_setup(
490 (uint16_t) app.nic_tx_ring_size,
494 rte_panic("Cannot init TX queue 0 for port %d (%d)\n",
501 ret = rte_eth_dev_start(port);
503 rte_panic("Cannot start port %d (%d)\n", port, ret);
507 check_all_ports_link_status(APP_MAX_NIC_PORTS, (~0x0));
513 app_assign_worker_ids();
514 app_init_mbuf_pools();
515 app_init_lpm_tables();
520 printf("Initialization completed.\n");