4 * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
11 * * Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * * Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in
15 * the documentation and/or other materials provided with the
17 * * Neither the name of Intel Corporation nor the names of its
18 * contributors may be used to endorse or promote products derived
19 * from this software without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
37 #include <sys/queue.h>
42 #include <rte_common.h>
43 #include <rte_memory.h>
44 #include <rte_memzone.h>
45 #include <rte_tailq.h>
47 #include <rte_byteorder.h>
48 #include <rte_atomic.h>
49 #include <rte_launch.h>
50 #include <rte_per_lcore.h>
51 #include <rte_lcore.h>
52 #include <rte_branch_prediction.h>
53 #include <rte_debug.h>
56 #include <rte_mempool.h>
57 #include <rte_memcpy.h>
59 #include <rte_interrupts.h>
61 #include <rte_ether.h>
62 #include <rte_ethdev.h>
63 #include <rte_malloc.h>
64 #include <rte_fbk_hash.h>
65 #include <rte_string_fns.h>
66 #include <rte_cycles.h>
73 #define MBUFS_PER_CLIENT 1536
74 #define MBUFS_PER_PORT 1536
75 #define MBUF_CACHE_SIZE 512
76 #define MBUF_OVERHEAD (sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
77 #define RX_MBUF_DATA_SIZE 2048
78 #define MBUF_SIZE (RX_MBUF_DATA_SIZE + MBUF_OVERHEAD)
80 #define RTE_MP_RX_DESC_DEFAULT 512
81 #define RTE_MP_TX_DESC_DEFAULT 512
82 #define CLIENT_QUEUE_RINGSIZE 128
86 /* The mbuf pool for packet rx */
87 struct rte_mempool *pktmbuf_pool;
89 /* array of info/queues for clients */
90 struct client *clients = NULL;
92 /* the port details */
93 struct port_info *ports;
96 * Initialise the mbuf pool for packet reception for the NIC, and any other
97 * buffer pools needed by the app - currently none.
100 init_mbuf_pools(void)
102 const unsigned num_mbufs = (num_clients * MBUFS_PER_CLIENT) \
103 + (ports->num_ports * MBUFS_PER_PORT);
105 /* don't pass single-producer/single-consumer flags to mbuf create as it
106 * seems faster to use a cache instead */
107 printf("Creating mbuf pool '%s' [%u mbufs] ...\n",
108 PKTMBUF_POOL_NAME, num_mbufs);
109 pktmbuf_pool = rte_mempool_create(PKTMBUF_POOL_NAME, num_mbufs,
110 MBUF_SIZE, MBUF_CACHE_SIZE,
111 sizeof(struct rte_pktmbuf_pool_private), rte_pktmbuf_pool_init,
112 NULL, rte_pktmbuf_init, NULL, rte_socket_id(), NO_FLAGS );
114 return (pktmbuf_pool == NULL); /* 0 on success */
118 * Initialise an individual port:
119 * - configure number of rx and tx rings
120 * - set up each rx ring, to pull from the main mbuf pool
121 * - set up each tx ring
122 * - start the port and report its status to stdout
125 init_port(uint8_t port_num)
127 /* for port configuration all features are off by default */
128 const struct rte_eth_conf port_conf = {
130 .mq_mode = ETH_MQ_RX_RSS
133 const uint16_t rx_rings = 1, tx_rings = num_clients;
134 const uint16_t rx_ring_size = RTE_MP_RX_DESC_DEFAULT;
135 const uint16_t tx_ring_size = RTE_MP_TX_DESC_DEFAULT;
140 printf("Port %u init ... ", (unsigned)port_num);
143 /* Standard DPDK port initialisation - config port, then set up
145 if ((retval = rte_eth_dev_configure(port_num, rx_rings, tx_rings,
149 for (q = 0; q < rx_rings; q++) {
150 retval = rte_eth_rx_queue_setup(port_num, q, rx_ring_size,
151 rte_eth_dev_socket_id(port_num),
153 if (retval < 0) return retval;
156 for ( q = 0; q < tx_rings; q ++ ) {
157 retval = rte_eth_tx_queue_setup(port_num, q, tx_ring_size,
158 rte_eth_dev_socket_id(port_num),
160 if (retval < 0) return retval;
163 rte_eth_promiscuous_enable(port_num);
165 retval = rte_eth_dev_start(port_num);
166 if (retval < 0) return retval;
174 * Set up the DPDK rings which will be used to pass packets, via
175 * pointers, between the multi-process server and client processes.
176 * Each client needs one RX queue.
184 const unsigned ringsize = CLIENT_QUEUE_RINGSIZE;
186 clients = rte_malloc("client details",
187 sizeof(*clients) * num_clients, 0);
189 rte_exit(EXIT_FAILURE, "Cannot allocate memory for client program details\n");
191 for (i = 0; i < num_clients; i++) {
192 /* Create an RX queue for each client */
193 socket_id = rte_socket_id();
194 q_name = get_rx_queue_name(i);
195 clients[i].rx_q = rte_ring_create(q_name,
197 RING_F_SP_ENQ | RING_F_SC_DEQ ); /* single prod, single cons */
198 if (clients[i].rx_q == NULL)
199 rte_exit(EXIT_FAILURE, "Cannot create rx ring queue for client %u\n", i);
204 /* Check the link status of all ports in up to 9s, and print them finally */
206 check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
208 #define CHECK_INTERVAL 100 /* 100ms */
209 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
210 uint8_t portid, count, all_ports_up, print_flag = 0;
211 struct rte_eth_link link;
213 printf("\nChecking link status");
215 for (count = 0; count <= MAX_CHECK_TIME; count++) {
217 for (portid = 0; portid < port_num; portid++) {
218 if ((port_mask & (1 << ports->id[portid])) == 0)
220 memset(&link, 0, sizeof(link));
221 rte_eth_link_get_nowait(ports->id[portid], &link);
222 /* print link status if flag set */
223 if (print_flag == 1) {
224 if (link.link_status)
225 printf("Port %d Link Up - speed %u "
226 "Mbps - %s\n", ports->id[portid],
227 (unsigned)link.link_speed,
228 (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
229 ("full-duplex") : ("half-duplex\n"));
231 printf("Port %d Link Down\n",
232 (uint8_t)ports->id[portid]);
235 /* clear all_ports_up flag if any link down */
236 if (link.link_status == 0) {
241 /* after finally printing all link status, get out */
245 if (all_ports_up == 0) {
248 rte_delay_ms(CHECK_INTERVAL);
251 /* set the print_flag if all ports up or timeout */
252 if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
260 * Main init function for the multi-process server app,
261 * calls subfunctions to do each stage of the initialisation.
264 init(int argc, char *argv[])
267 const struct rte_memzone *mz;
268 uint8_t i, total_ports;
270 /* init EAL, parsing EAL args */
271 retval = rte_eal_init(argc, argv);
277 /* get total number of ports */
278 total_ports = rte_eth_dev_count();
280 /* set up array for port data */
281 mz = rte_memzone_reserve(MZ_PORT_INFO, sizeof(*ports),
282 rte_socket_id(), NO_FLAGS);
284 rte_exit(EXIT_FAILURE, "Cannot reserve memory zone for port information\n");
285 memset(mz->addr, 0, sizeof(*ports));
288 /* parse additional, application arguments */
289 retval = parse_app_args(total_ports, argc, argv);
293 /* initialise mbuf pools */
294 retval = init_mbuf_pools();
296 rte_exit(EXIT_FAILURE, "Cannot create needed mbuf pools\n");
298 /* now initialise the ports we will use */
299 for (i = 0; i < ports->num_ports; i++) {
300 retval = init_port(ports->id[i]);
302 rte_exit(EXIT_FAILURE, "Cannot initialise port %u\n",
306 check_all_ports_link_status(ports->num_ports, (~0x0));
308 /* initialise the client queues/rings for inter-eu comms */