4 * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
11 * * Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * * Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in
15 * the documentation and/or other materials provided with the
17 * * Neither the name of Intel Corporation nor the names of its
18 * contributors may be used to endorse or promote products derived
19 * from this software without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39 #include <sys/types.h>
40 #include <sys/queue.h>
42 #include <sys/prctl.h>
43 #include <netinet/in.h>
52 #include <rte_common.h>
54 #include <rte_malloc.h>
55 #include <rte_memory.h>
56 #include <rte_memcpy.h>
57 #include <rte_memzone.h>
59 #include <rte_per_lcore.h>
60 #include <rte_launch.h>
61 #include <rte_atomic.h>
62 #include <rte_cycles.h>
63 #include <rte_prefetch.h>
64 #include <rte_lcore.h>
65 #include <rte_per_lcore.h>
66 #include <rte_branch_prediction.h>
67 #include <rte_interrupts.h>
69 #include <rte_random.h>
70 #include <rte_debug.h>
71 #include <rte_ether.h>
72 #include <rte_ethdev.h>
74 #include <rte_mempool.h>
76 #include <rte_string_fns.h>
80 #define SIG_PARENT_EXIT SIGUSR1
83 pid_t pid; /**< pthread identifier */
84 lcore_function_t *f; /**< function to call */
85 void *arg; /**< argument of function */
86 slave_exit_notify *cb_fn;
87 } __rte_cache_aligned;
90 static struct lcore_stat *core_cfg;
91 static uint16_t *lcore_cfg = NULL;
93 /* signal handler to be notified after parent leaves */
95 sighand_parent_exit(int sig)
97 printf("lcore = %u : Find parent leaves, sig=%d\n", rte_lcore_id(),
99 printf("Child leaving\n");
106 * Real function entrance ran in slave process
109 slave_proc_func(void)
111 struct rte_config *config;
112 unsigned slave_id = rte_lcore_id();
113 struct lcore_stat *cfg = &core_cfg[slave_id];
115 if (prctl(PR_SET_PDEATHSIG, SIG_PARENT_EXIT, 0, 0, 0, 0) != 0)
116 printf("Warning: Slave can't register for being notified in"
117 "case master process exited\n");
119 struct sigaction act;
120 memset(&act, 0 , sizeof(act));
121 act.sa_handler = sighand_parent_exit;
122 if (sigaction(SIG_PARENT_EXIT, &act, NULL) != 0)
123 printf("Fail to register signal handler:%d\n", SIG_PARENT_EXIT);
126 /* Set slave process to SECONDARY to avoid operation like dev_start/stop etc */
127 config = rte_eal_get_configuration();
129 printf("Warning:Can't get rte_config\n");
131 config->process_type = RTE_PROC_SECONDARY;
133 printf("Core %u is ready (pid=%d)\n", slave_id, (int)cfg->pid);
135 exit(cfg->f(cfg->arg));
139 * function entrance ran in master thread, which will spawn slave process and wait until
140 * specific slave exited.
143 lcore_func(void *arg __attribute__((unused)))
145 unsigned slave_id = rte_lcore_id();
146 struct lcore_stat *cfg = &core_cfg[slave_id];
149 if (rte_get_master_lcore() == slave_id)
150 return cfg->f(cfg->arg);
152 /* fork a slave process */
156 printf("Failed to fork\n");
158 } else if (pid == 0) /* child */
159 return slave_proc_func();
163 waitpid(pid, &stat, 0);
168 /* Notify slave's exit if applicable */
170 cfg->cb_fn(slave_id, stat);
179 /* Setup lcore ID allocation map */
180 lcore_cfg = rte_zmalloc("LCORE_ID_MAP",
181 sizeof(uint16_t) * RTE_MAX_LCORE,
182 RTE_CACHE_LINE_SIZE);
184 if(lcore_cfg == NULL)
185 rte_panic("Failed to malloc\n");
187 for (i = 0; i < RTE_MAX_LCORE; i++) {
188 if (rte_lcore_is_enabled(i))
195 flib_assign_lcore_id(void)
201 * thread assigned a lcore id previously, or a slave thread. But still have
202 * a bug here: If the core mask includes core 0, and that core call this
203 * function, it still can get a new lcore id.
205 if (rte_lcore_id() != 0)
209 /* Find a lcore id not used yet, avoid to use lcore ID 0 */
210 for (i = 1; i < RTE_MAX_LCORE; i++) {
211 if (lcore_cfg[i] == 0)
214 if (i == RTE_MAX_LCORE)
217 /* Assign new lcore id to this thread */
219 ret = rte_atomic16_cmpset(&lcore_cfg[i], 0, 1);
220 } while (unlikely(ret == 0));
222 RTE_PER_LCORE(_lcore_id) = i;
227 flib_free_lcore_id(unsigned lcore_id)
229 /* id is not valid or belongs to pinned core id */
230 if (lcore_id >= RTE_MAX_LCORE || lcore_id == 0 ||
231 rte_lcore_is_enabled(lcore_id))
234 lcore_cfg[lcore_id] = 0;
238 flib_register_slave_exit_notify(unsigned slave_id,
239 slave_exit_notify *cb)
244 if (!rte_lcore_is_enabled(slave_id))
247 core_cfg[slave_id].cb_fn = cb;
253 flib_query_slave_status(unsigned slave_id)
255 if (!rte_lcore_is_enabled(slave_id))
257 /* pid only be set when slave process spawned */
258 if (core_cfg[slave_id].pid != 0)
265 flib_remote_launch(lcore_function_t *f,
266 void *arg, unsigned slave_id)
271 if (!rte_lcore_is_enabled(slave_id))
274 /* Wait until specific lcore state change to WAIT */
275 rte_eal_wait_lcore(slave_id);
277 core_cfg[slave_id].f = f;
278 core_cfg[slave_id].arg = arg;
280 return rte_eal_remote_launch(lcore_func, NULL, slave_id);
284 flib_mp_remote_launch(lcore_function_t *f, void *arg,
285 enum rte_rmt_call_master_t call_master)
289 RTE_LCORE_FOREACH_SLAVE(i) {
290 core_cfg[i].arg = arg;
294 return rte_eal_mp_remote_launch(lcore_func, NULL, call_master);
300 if ((core_cfg = rte_zmalloc("core_cfg",
301 sizeof(struct lcore_stat) * RTE_MAX_LCORE,
302 RTE_CACHE_LINE_SIZE)) == NULL ) {
303 printf("rte_zmalloc failed\n");
307 if (lcore_id_init() != 0) {
308 printf("lcore_id_init failed\n");