1 /* SPDX-License-Identifier: BSD-3-Clause
2 * Copyright(c) 2016-2017 Intel Corporation
13 #include <rte_common.h>
14 #include <rte_memory.h>
15 #include <rte_memzone.h>
17 #include <rte_byteorder.h>
18 #include <rte_atomic.h>
19 #include <rte_launch.h>
20 #include <rte_per_lcore.h>
21 #include <rte_lcore.h>
22 #include <rte_branch_prediction.h>
23 #include <rte_debug.h>
26 #include <rte_mempool.h>
27 #include <rte_memcpy.h>
29 #include <rte_interrupts.h>
30 #include <rte_ether.h>
31 #include <rte_ethdev.h>
32 #include <rte_malloc.h>
33 #include <rte_string_fns.h>
34 #include <rte_cycles.h>
42 #define MBUFS_PER_NODE 1536
43 #define MBUFS_PER_PORT 1536
44 #define MBUF_CACHE_SIZE 512
46 #define RTE_MP_RX_DESC_DEFAULT 512
47 #define RTE_MP_TX_DESC_DEFAULT 512
48 #define NODE_QUEUE_RINGSIZE 128
52 /* The mbuf pool for packet rx */
53 struct rte_mempool *pktmbuf_pool;
55 /* array of info/queues for nodes */
59 struct rte_efd_table *efd_table;
61 /* Shared info between server and nodes */
62 struct shared_info *info;
65 * Initialise the mbuf pool for packet reception for the NIC, and any other
66 * buffer pools needed by the app - currently none.
71 const unsigned int num_mbufs = (num_nodes * MBUFS_PER_NODE) +
72 (info->num_ports * MBUFS_PER_PORT);
75 * Don't pass single-producer/single-consumer flags to mbuf create as it
76 * seems faster to use a cache instead
78 printf("Creating mbuf pool '%s' [%u mbufs] ...\n",
79 PKTMBUF_POOL_NAME, num_mbufs);
80 pktmbuf_pool = rte_pktmbuf_pool_create(PKTMBUF_POOL_NAME, num_mbufs,
81 MBUF_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
83 return pktmbuf_pool == NULL; /* 0 on success */
87 * Initialise an individual port:
88 * - configure number of rx and tx rings
89 * - set up each rx ring, to pull from the main mbuf pool
90 * - set up each tx ring
91 * - start the port and report its status to stdout
94 init_port(uint16_t port_num)
96 /* for port configuration all features are off by default */
97 struct rte_eth_conf port_conf = {
99 .mq_mode = ETH_MQ_RX_RSS,
102 const uint16_t rx_rings = 1, tx_rings = num_nodes;
103 uint16_t rx_ring_size = RTE_MP_RX_DESC_DEFAULT;
104 uint16_t tx_ring_size = RTE_MP_TX_DESC_DEFAULT;
105 struct rte_eth_dev_info dev_info;
106 struct rte_eth_txconf txconf;
111 printf("Port %u init ... ", port_num);
114 retval = rte_eth_dev_info_get(port_num, &dev_info);
118 if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
119 port_conf.txmode.offloads |=
120 DEV_TX_OFFLOAD_MBUF_FAST_FREE;
123 * Standard DPDK port initialisation - config port, then set up
126 retval = rte_eth_dev_configure(port_num, rx_rings, tx_rings, &port_conf);
130 retval = rte_eth_dev_adjust_nb_rx_tx_desc(port_num, &rx_ring_size,
135 for (q = 0; q < rx_rings; q++) {
136 retval = rte_eth_rx_queue_setup(port_num, q, rx_ring_size,
137 rte_eth_dev_socket_id(port_num),
143 txconf = dev_info.default_txconf;
144 txconf.offloads = port_conf.txmode.offloads;
145 for (q = 0; q < tx_rings; q++) {
146 retval = rte_eth_tx_queue_setup(port_num, q, tx_ring_size,
147 rte_eth_dev_socket_id(port_num),
153 rte_eth_promiscuous_enable(port_num);
155 retval = rte_eth_dev_start(port_num);
165 * Set up the DPDK rings which will be used to pass packets, via
166 * pointers, between the multi-process server and node processes.
167 * Each node needs one RX queue.
173 unsigned int socket_id;
175 const unsigned int ringsize = NODE_QUEUE_RINGSIZE;
177 nodes = rte_malloc("node details",
178 sizeof(*nodes) * num_nodes, 0);
180 rte_exit(EXIT_FAILURE, "Cannot allocate memory for "
181 "node program details\n");
183 for (i = 0; i < num_nodes; i++) {
184 /* Create an RX queue for each node */
185 socket_id = rte_socket_id();
186 q_name = get_rx_queue_name(i);
187 nodes[i].rx_q = rte_ring_create(q_name,
189 RING_F_SP_ENQ | RING_F_SC_DEQ);
190 if (nodes[i].rx_q == NULL)
191 rte_exit(EXIT_FAILURE, "Cannot create rx ring queue "
198 * Create EFD table which will contain all the flows
199 * that will be distributed among the nodes
202 create_efd_table(void)
204 uint8_t socket_id = rte_socket_id();
207 efd_table = rte_efd_create("flow table", num_flows * 2, sizeof(uint32_t),
208 1 << socket_id, socket_id);
210 if (efd_table == NULL)
211 rte_exit(EXIT_FAILURE, "Problem creating the flow table\n");
215 populate_efd_table(void)
220 uint8_t socket_id = rte_socket_id();
223 /* Add flows in table */
224 for (i = 0; i < num_flows; i++) {
225 node_id = i % num_nodes;
227 ip_dst = rte_cpu_to_be_32(i);
228 ret = rte_efd_update(efd_table, socket_id,
229 (void *)&ip_dst, (efd_value_t)node_id);
231 rte_exit(EXIT_FAILURE, "Unable to add entry %u in "
235 printf("EFD table: Adding 0x%x keys\n", num_flows);
238 /* Check the link status of all ports in up to 9s, and print them finally */
240 check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
242 #define CHECK_INTERVAL 100 /* 100ms */
243 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
244 uint8_t count, all_ports_up, print_flag = 0;
246 struct rte_eth_link link;
248 printf("\nChecking link status");
250 for (count = 0; count <= MAX_CHECK_TIME; count++) {
252 for (portid = 0; portid < port_num; portid++) {
253 if ((port_mask & (1 << info->id[portid])) == 0)
255 memset(&link, 0, sizeof(link));
256 rte_eth_link_get_nowait(info->id[portid], &link);
257 /* print link status if flag set */
258 if (print_flag == 1) {
259 if (link.link_status)
261 "Port%d Link Up. Speed %u Mbps - %s\n",
264 (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
265 ("full-duplex") : ("half-duplex\n"));
267 printf("Port %d Link Down\n",
271 /* clear all_ports_up flag if any link down */
272 if (link.link_status == ETH_LINK_DOWN) {
277 /* after finally printing all link status, get out */
281 if (all_ports_up == 0) {
284 rte_delay_ms(CHECK_INTERVAL);
287 /* set the print_flag if all ports up or timeout */
288 if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
296 * Main init function for the multi-process server app,
297 * calls subfunctions to do each stage of the initialisation.
300 init(int argc, char *argv[])
303 const struct rte_memzone *mz;
304 uint8_t i, total_ports;
306 /* init EAL, parsing EAL args */
307 retval = rte_eal_init(argc, argv);
313 /* get total number of ports */
314 total_ports = rte_eth_dev_count_avail();
316 /* set up array for port data */
317 mz = rte_memzone_reserve(MZ_SHARED_INFO, sizeof(*info),
318 rte_socket_id(), NO_FLAGS);
320 rte_exit(EXIT_FAILURE, "Cannot reserve memory zone "
321 "for port information\n");
322 memset(mz->addr, 0, sizeof(*info));
325 /* parse additional, application arguments */
326 retval = parse_app_args(total_ports, argc, argv);
330 /* initialise mbuf pools */
331 retval = init_mbuf_pools();
333 rte_exit(EXIT_FAILURE, "Cannot create needed mbuf pools\n");
335 /* now initialise the ports we will use */
336 for (i = 0; i < info->num_ports; i++) {
337 retval = init_port(info->id[i]);
339 rte_exit(EXIT_FAILURE, "Cannot initialise port %u\n",
343 check_all_ports_link_status(info->num_ports, (~0x0));
345 /* initialise the node queues/rings for inter-eu comms */
348 /* Create the EFD table */
351 /* Populate the EFD table */
352 populate_efd_table();
354 /* Share the total number of nodes */
355 info->num_nodes = num_nodes;
357 /* Share the total number of flows */
358 info->num_flows = num_flows;