lib/eal/linux/eal_timer.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright(c) 2010-2014 Intel Corporation.
   3  * Copyright(c) 2012-2013 6WIND S.A.
   4  */
   5
   6 #include <string.h>
   7 #include <stdlib.h>
   8 #include <stdio.h>
   9 #include <stdint.h>
  10 #include <unistd.h>
  11 #include <fcntl.h>
  12 #include <inttypes.h>
  13 #include <sys/mman.h>
  14 #include <sys/queue.h>
  15 #include <pthread.h>
  16 #include <errno.h>
  17
  18 #include <rte_common.h>
  19 #include <rte_log.h>
  20 #include <rte_cycles.h>
  21 #include <rte_lcore.h>
  22 #include <rte_memory.h>
  23 #include <rte_eal.h>
  24 #include <rte_debug.h>
  25
  26 #include "eal_private.h"
  27 #include "eal_internal_cfg.h"
  28
  29 enum timer_source eal_timer_source = EAL_TIMER_HPET;
  30
  31 #ifdef RTE_LIBEAL_USE_HPET
  32
  33 #define DEV_HPET "/dev/hpet"
  34
  35 /* Maximum number of counters. */
  36 #define HPET_TIMER_NUM 3
  37
  38 /* General capabilities register */
  39 #define CLK_PERIOD_SHIFT     32 /* Clock period shift. */
  40 #define CLK_PERIOD_MASK      0xffffffff00000000ULL /* Clock period mask. */
  41
  42 /**
  43  * HPET timer registers. From the Intel IA-PC HPET (High Precision Event
  44  * Timers) Specification.
  45  */
  46 struct eal_hpet_regs {
  47         /* Memory-mapped, software visible registers */
  48         uint64_t capabilities;      /**< RO General Capabilities Register. */
  49         uint64_t reserved0;         /**< Reserved for future use. */
  50         uint64_t config;            /**< RW General Configuration Register. */
  51         uint64_t reserved1;         /**< Reserved for future use. */
  52         uint64_t isr;               /**< RW Clear General Interrupt Status. */
  53         uint64_t reserved2[25];     /**< Reserved for future use. */
  54         union {
  55                 uint64_t counter;   /**< RW Main Counter Value Register. */
  56                 struct {
  57                         uint32_t counter_l; /**< RW Main Counter Low. */
  58                         uint32_t counter_h; /**< RW Main Counter High. */
  59                 };
  60         };
  61         uint64_t reserved3;         /**< Reserved for future use. */
  62         struct {
  63                 uint64_t config;    /**< RW Timer Config and Capability Reg. */
  64                 uint64_t comp;      /**< RW Timer Comparator Value Register. */
  65                 uint64_t fsb;       /**< RW FSB Interrupt Route Register. */
  66                 uint64_t reserved4; /**< Reserved for future use. */
  67         } timers[HPET_TIMER_NUM]; /**< Set of HPET timers. */
  68 };
  69
  70 /* Mmap'd hpet registers */
  71 static volatile struct eal_hpet_regs *eal_hpet = NULL;
  72
  73 /* Period at which the HPET counter increments in
  74  * femtoseconds (10^-15 seconds). */
  75 static uint32_t eal_hpet_resolution_fs = 0;
  76
  77 /* Frequency of the HPET counter in Hz */
  78 static uint64_t eal_hpet_resolution_hz = 0;
  79
  80 /* Incremented 4 times during one 32bits hpet full count */
  81 static uint32_t eal_hpet_msb;
  82
  83 static pthread_t msb_inc_thread_id;
  84
  85 /*
  86  * This function runs on a specific thread to update a global variable
  87  * containing used to process MSB of the HPET (unfortunately, we need
  88  * this because hpet is 32 bits by default under linux).
  89  */
  90 static void *
  91 hpet_msb_inc(__rte_unused void *arg)
  92 {
  93         uint32_t t;
  94
  95         while (1) {
  96                 t = (eal_hpet->counter_l >> 30);
  97                 if (t != (eal_hpet_msb & 3))
  98                         eal_hpet_msb ++;
  99                 sleep(10);
 100         }
 101         return NULL;
 102 }
 103
 104 uint64_t
 105 rte_get_hpet_hz(void)
 106 {
 107         const struct internal_config *internal_conf =
 108                 eal_get_internal_configuration();
 109
 110         if (internal_conf->no_hpet)
 111                 rte_panic("Error, HPET called, but no HPET present\n");
 112
 113         return eal_hpet_resolution_hz;
 114 }
 115
 116 uint64_t
 117 rte_get_hpet_cycles(void)
 118 {
 119         uint32_t t, msb;
 120         uint64_t ret;
 121         const struct internal_config *internal_conf =
 122                 eal_get_internal_configuration();
 123
 124         if (internal_conf->no_hpet)
 125                 rte_panic("Error, HPET called, but no HPET present\n");
 126
 127         t = eal_hpet->counter_l;
 128         msb = eal_hpet_msb;
 129         ret = (msb + 2 - (t >> 30)) / 4;
 130         ret <<= 32;
 131         ret += t;
 132         return ret;
 133 }
 134
 135 #endif
 136
 137 #ifdef RTE_LIBEAL_USE_HPET
 138 /*
 139  * Open and mmap /dev/hpet (high precision event timer) that will
 140  * provide our time reference.
 141  */
 142 int
 143 rte_eal_hpet_init(int make_default)
 144 {
 145         int fd, ret;
 146         struct internal_config *internal_conf =
 147                 eal_get_internal_configuration();
 148
 149         if (internal_conf->no_hpet) {
 150                 RTE_LOG(NOTICE, EAL, "HPET is disabled\n");
 151                 return -1;
 152         }
 153
 154         fd = open(DEV_HPET, O_RDONLY);
 155         if (fd < 0) {
 156                 RTE_LOG(ERR, EAL, "ERROR: Cannot open "DEV_HPET": %s!\n",
 157                         strerror(errno));
 158                 internal_conf->no_hpet = 1;
 159                 return -1;
 160         }
 161         eal_hpet = mmap(NULL, 1024, PROT_READ, MAP_SHARED, fd, 0);
 162         if (eal_hpet == MAP_FAILED) {
 163                 RTE_LOG(ERR, EAL, "ERROR: Cannot mmap "DEV_HPET"!\n"
 164                                 "Please enable CONFIG_HPET_MMAP in your kernel configuration "
 165                                 "to allow HPET support.\n"
 166                                 "To run without using HPET, unset RTE_LIBEAL_USE_HPET "
 167                                 "in your build configuration or use '--no-hpet' EAL flag.\n");
 168                 close(fd);
 169                 internal_conf->no_hpet = 1;
 170                 return -1;
 171         }
 172         close(fd);
 173
 174         eal_hpet_resolution_fs = (uint32_t)((eal_hpet->capabilities &
 175                                         CLK_PERIOD_MASK) >>
 176                                         CLK_PERIOD_SHIFT);
 177
 178         eal_hpet_resolution_hz = (1000ULL*1000ULL*1000ULL*1000ULL*1000ULL) /
 179                 (uint64_t)eal_hpet_resolution_fs;
 180
 181         RTE_LOG(INFO, EAL, "HPET frequency is ~%"PRIu64" kHz\n",
 182                         eal_hpet_resolution_hz/1000);
 183
 184         eal_hpet_msb = (eal_hpet->counter_l >> 30);
 185
 186         /* create a thread that will increment a global variable for
 187          * msb (hpet is 32 bits by default under linux) */
 188         ret = rte_ctrl_thread_create(&msb_inc_thread_id, "hpet-msb-inc", NULL,
 189                                      hpet_msb_inc, NULL);
 190         if (ret != 0) {
 191                 RTE_LOG(ERR, EAL, "ERROR: Cannot create HPET timer thread!\n");
 192                 internal_conf->no_hpet = 1;
 193                 return -1;
 194         }
 195
 196         if (make_default)
 197                 eal_timer_source = EAL_TIMER_HPET;
 198         return 0;
 199 }
 200 #endif
 201
 202 uint64_t
 203 get_tsc_freq(void)
 204 {
 205 #ifdef CLOCK_MONOTONIC_RAW
 206 #define NS_PER_SEC 1E9
 207 #define CYC_PER_10MHZ 1E7
 208
 209         struct timespec sleeptime = {.tv_nsec = NS_PER_SEC / 10 }; /* 1/10 second */
 210
 211         struct timespec t_start, t_end;
 212         uint64_t tsc_hz;
 213
 214         if (clock_gettime(CLOCK_MONOTONIC_RAW, &t_start) == 0) {
 215                 uint64_t ns, end, start = rte_rdtsc();
 216                 nanosleep(&sleeptime,NULL);
 217                 clock_gettime(CLOCK_MONOTONIC_RAW, &t_end);
 218                 end = rte_rdtsc();
 219                 ns = ((t_end.tv_sec - t_start.tv_sec) * NS_PER_SEC);
 220                 ns += (t_end.tv_nsec - t_start.tv_nsec);
 221
 222                 double secs = (double)ns/NS_PER_SEC;
 223                 tsc_hz = (uint64_t)((end - start)/secs);
 224                 /* Round up to 10Mhz. 1E7 ~ 10Mhz */
 225                 return RTE_ALIGN_MUL_NEAR(tsc_hz, CYC_PER_10MHZ);
 226         }
 227 #endif
 228         return 0;
 229 }
 230
 231 int
 232 rte_eal_timer_init(void)
 233 {
 234
 235         eal_timer_source = EAL_TIMER_TSC;
 236
 237         set_tsc_freq();
 238         return 0;
 239 }