6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
10 * * Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * * Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in
14 * the documentation and/or other materials provided with the
16 * * Neither the name of NXP nor the names of its
17 * contributors may be used to endorse or promote products derived
18 * from this software without specific prior written permission.
20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39 * DPDK device bus interface
41 * This file exposes API and interfaces for bus abstraction
42 * over the devices and drivers in EAL.
50 #include <sys/queue.h>
55 /** Double linked list of buses */
56 TAILQ_HEAD(rte_bus_list, rte_bus);
62 * IOVA mapping mode is iommu programming mode of a device.
63 * That device (for example: IOMMU backed DMA device) based
64 * on rte_iova_mode will generate physical or virtual address.
68 RTE_IOVA_DC = 0, /* Don't care mode */
69 RTE_IOVA_PA = (1 << 0), /* DMA using physical address */
70 RTE_IOVA_VA = (1 << 1) /* DMA using virtual address */
74 * Bus specific scan for devices attached on the bus.
75 * For each bus object, the scan would be responsible for finding devices and
76 * adding them to its private device list.
78 * A bus should mandatorily implement this method.
81 * 0 for successful scan
82 * <0 for unsuccessful scan with error value
84 typedef int (*rte_bus_scan_t)(void);
87 * Implementation specific probe function which is responsible for linking
88 * devices on that bus with applicable drivers.
90 * This is called while iterating over each registered bus.
93 * 0 for successful probe
94 * !0 for any error while probing
96 typedef int (*rte_bus_probe_t)(void);
99 * Device iterator to find a device on a bus.
101 * This function returns an rte_device if one of those held by the bus
102 * matches the data passed as parameter.
104 * If the comparison function returns zero this function should stop iterating
105 * over any more devices. To continue a search the device of a previous search
106 * can be passed via the start parameter.
109 * Comparison function.
112 * Data to compare each device against.
115 * starting point for the iteration
118 * The first device matching the data, NULL if none exists.
120 typedef struct rte_device *
121 (*rte_bus_find_device_t)(const struct rte_device *start, rte_dev_cmp_t cmp,
125 * Implementation specific probe function which is responsible for linking
126 * devices on that bus with applicable drivers.
129 * Device pointer that was returned by a previous call to find_device.
135 typedef int (*rte_bus_plug_t)(struct rte_device *dev);
138 * Implementation specific remove function which is responsible for unlinking
139 * devices on that bus from assigned driver.
142 * Device pointer that was returned by a previous call to find_device.
148 typedef int (*rte_bus_unplug_t)(struct rte_device *dev);
151 * Bus specific parsing function.
152 * Validates the syntax used in the textual representation of a device,
153 * If the syntax is valid and ``addr`` is not NULL, writes the bus-specific
154 * device representation to ``addr``.
157 * device textual description
160 * device information location address, into which parsed info
161 * should be written. If NULL, nothing should be written, which
165 * 0 if parsing was successful.
168 typedef int (*rte_bus_parse_t)(const char *name, void *addr);
173 enum rte_bus_scan_mode {
174 RTE_BUS_SCAN_UNDEFINED,
175 RTE_BUS_SCAN_WHITELIST,
176 RTE_BUS_SCAN_BLACKLIST,
180 * A structure used to configure bus operations.
182 struct rte_bus_conf {
183 enum rte_bus_scan_mode scan_mode; /**< Scan policy. */
188 * Get common iommu class of the all the devices on the bus. The bus may
189 * check that those devices are attached to iommu driver.
190 * If no devices are attached to the bus. The bus may return with don't care
192 * Otherwise, The bus will return appropriate _pa or _va iova mode.
195 * enum rte_iova_mode value.
197 typedef enum rte_iova_mode (*rte_bus_get_iommu_class_t)(void);
201 * A structure describing a generic bus.
204 TAILQ_ENTRY(rte_bus) next; /**< Next bus object in linked list */
205 const char *name; /**< Name of the bus */
206 rte_bus_scan_t scan; /**< Scan for devices attached to bus */
207 rte_bus_probe_t probe; /**< Probe devices on bus */
208 rte_bus_find_device_t find_device; /**< Find a device on the bus */
209 rte_bus_plug_t plug; /**< Probe single device for drivers */
210 rte_bus_unplug_t unplug; /**< Remove single device from driver */
211 rte_bus_parse_t parse; /**< Parse a device name */
212 struct rte_bus_conf conf; /**< Bus configuration */
213 rte_bus_get_iommu_class_t get_iommu_class; /**< Get iommu class */
217 * Register a Bus handler.
220 * A pointer to a rte_bus structure describing the bus
223 void rte_bus_register(struct rte_bus *bus);
226 * Unregister a Bus handler.
229 * A pointer to a rte_bus structure describing the bus
230 * to be unregistered.
232 void rte_bus_unregister(struct rte_bus *bus);
235 * Scan all the buses.
238 * 0 in case of success in scanning all buses
239 * !0 in case of failure to scan
241 int rte_bus_scan(void);
244 * For each device on the buses, perform a driver 'match' and call the
245 * driver-specific probe for device initialization.
248 * 0 for successful match/probe
251 int rte_bus_probe(void);
254 * Dump information of all the buses registered with EAL.
257 * A valid and open output stream handle
259 void rte_bus_dump(FILE *f);
262 * Bus comparison function.
268 * Data to compare against.
271 * 0 if the bus matches the data.
272 * !0 if the bus does not match.
273 * <0 if ordering is possible and the bus is lower than the data.
274 * >0 if ordering is possible and the bus is greater than the data.
276 typedef int (*rte_bus_cmp_t)(const struct rte_bus *bus, const void *data);
279 * Bus iterator to find a particular bus.
281 * This function compares each registered bus to find one that matches
282 * the data passed as parameter.
284 * If the comparison function returns zero this function will stop iterating
285 * over any more buses. To continue a search the bus of a previous search can
286 * be passed via the start parameter.
289 * Starting point for the iteration.
292 * Comparison function.
295 * Data to pass to comparison function.
298 * A pointer to a rte_bus structure or NULL in case no bus matches
300 struct rte_bus *rte_bus_find(const struct rte_bus *start, rte_bus_cmp_t cmp,
304 * Find the registered bus for a particular device.
306 struct rte_bus *rte_bus_find_by_device(const struct rte_device *dev);
309 * Find the registered bus for a given name.
311 struct rte_bus *rte_bus_find_by_name(const char *busname);
315 * Get the common iommu class of devices bound on to buses available in the
316 * system. The default mode is PA.
319 * enum rte_iova_mode value.
321 enum rte_iova_mode rte_bus_get_iommu_class(void);
324 * Helper for Bus registration.
325 * The constructor has higher priority than PMD constructors.
327 #define RTE_REGISTER_BUS(nm, bus) \
328 RTE_INIT_PRIO(businitfn_ ##nm, 110); \
329 static void businitfn_ ##nm(void) \
331 (bus).name = RTE_STR(nm);\
332 rte_bus_register(&bus); \
339 #endif /* _RTE_BUS_H */