4 * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
11 * * Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * * Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in
15 * the documentation and/or other materials provided with the
17 * * Neither the name of Intel Corporation nor the names of its
18 * contributors may be used to endorse or promote products derived
19 * from this software without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
34 #ifndef _RTE_ETHDEV_H_
35 #define _RTE_ETHDEV_H_
40 * RTE Ethernet Device API
42 * The Ethernet Device API is composed of two parts:
44 * - The application-oriented Ethernet API that includes functions to setup
45 * an Ethernet device (configure it, setup its RX and TX queues and start it),
46 * to get its MAC address, the speed and the status of its physical link,
47 * to receive and to transmit packets, and so on.
49 * - The driver-oriented Ethernet API that exports a function allowing
50 * an Ethernet Poll Mode Driver (PMD) to simultaneously register itself as
51 * an Ethernet device driver and as a PCI driver for a set of matching PCI
52 * [Ethernet] devices classes.
54 * By default, all the functions of the Ethernet Device API exported by a PMD
55 * are lock-free functions which assume to not be invoked in parallel on
56 * different logical cores to work on the same target object. For instance,
57 * the receive function of a PMD cannot be invoked in parallel on two logical
58 * cores to poll the same RX queue [of the same port]. Of course, this function
59 * can be invoked in parallel by different logical cores on different RX queues.
60 * It is the responsibility of the upper level application to enforce this rule.
62 * If needed, parallel accesses by multiple logical cores to shared queues
63 * shall be explicitly protected by dedicated inline lock-aware functions
64 * built on top of their corresponding lock-free functions of the PMD API.
66 * In all functions of the Ethernet API, the Ethernet device is
67 * designated by an integer >= 0 named the device port identifier.
69 * At the Ethernet driver level, Ethernet devices are represented by a generic
70 * data structure of type *rte_eth_dev*.
72 * Ethernet devices are dynamically registered during the PCI probing phase
73 * performed at EAL initialization time.
74 * When an Ethernet device is being probed, an *rte_eth_dev* structure and
75 * a new port identifier are allocated for that device. Then, the eth_dev_init()
76 * function supplied by the Ethernet driver matching the probed PCI
77 * device is invoked to properly initialize the device.
79 * The role of the device init function consists of resetting the hardware,
80 * checking access to Non-volatile Memory (NVM), reading the MAC address
83 * If the device init operation is successful, the correspondence between
84 * the port identifier assigned to the new device and its associated
85 * *rte_eth_dev* structure is effectively registered.
86 * Otherwise, both the *rte_eth_dev* structure and the port identifier are
89 * The functions exported by the application Ethernet API to setup a device
90 * designated by its port identifier must be invoked in the following order:
91 * - rte_eth_dev_configure()
92 * - rte_eth_tx_queue_setup()
93 * - rte_eth_rx_queue_setup()
94 * - rte_eth_dev_start()
96 * Then, the network application can invoke, in any order, the functions
97 * exported by the Ethernet API to get the MAC address of a given device, to
98 * get the speed and the status of a device physical link, to receive/transmit
99 * [burst of] packets, and so on.
101 * If the application wants to change the configuration (i.e. call
102 * rte_eth_dev_configure(), rte_eth_tx_queue_setup(), or
103 * rte_eth_rx_queue_setup()), it must call rte_eth_dev_stop() first to stop the
104 * device and then do the reconfiguration before calling rte_eth_dev_start()
105 * again. The tramsit and receive functions should not be invoked when the
108 * Please note that some configuration is not stored between calls to
109 * rte_eth_dev_stop()/rte_eth_dev_start(). The following configuration will
112 * - flow control settings
113 * - receive mode configuration (promiscuous mode, hardware checksum mode,
114 * RSS/VMDQ settings etc.)
115 * - VLAN filtering configuration
116 * - MAC addresses supplied to MAC address array
117 * - flow director filtering mode (but not filtering rules)
118 * - NIC queue statistics mappings
120 * Any other configuration will not be stored and will need to be re-entered
121 * after a call to rte_eth_dev_start().
123 * Finally, a network application can close an Ethernet device by invoking the
124 * rte_eth_dev_close() function.
126 * Each function of the application Ethernet API invokes a specific function
127 * of the PMD that controls the target device designated by its port
129 * For this purpose, all device-specific functions of an Ethernet driver are
130 * supplied through a set of pointers contained in a generic structure of type
132 * The address of the *eth_dev_ops* structure is stored in the *rte_eth_dev*
133 * structure by the device init function of the Ethernet driver, which is
134 * invoked during the PCI probing phase, as explained earlier.
136 * In other words, each function of the Ethernet API simply retrieves the
137 * *rte_eth_dev* structure associated with the device port identifier and
138 * performs an indirect invocation of the corresponding driver function
139 * supplied in the *eth_dev_ops* structure of the *rte_eth_dev* structure.
141 * For performance reasons, the address of the burst-oriented RX and TX
142 * functions of the Ethernet driver are not contained in the *eth_dev_ops*
143 * structure. Instead, they are directly stored at the beginning of the
144 * *rte_eth_dev* structure to avoid an extra indirect memory access during
147 * RTE ethernet device drivers do not use interrupts for transmitting or
148 * receiving. Instead, Ethernet drivers export Poll-Mode receive and transmit
149 * functions to applications.
150 * Both receive and transmit functions are packet-burst oriented to minimize
151 * their cost per packet through the following optimizations:
153 * - Sharing among multiple packets the incompressible cost of the
154 * invocation of receive/transmit functions.
156 * - Enabling receive/transmit functions to take advantage of burst-oriented
157 * hardware features (L1 cache, prefetch instructions, NIC head/tail
158 * registers) to minimize the number of CPU cycles per packet, for instance,
159 * by avoiding useless read memory accesses to ring descriptors, or by
160 * systematically using arrays of pointers that exactly fit L1 cache line
161 * boundaries and sizes.
163 * The burst-oriented receive function does not provide any error notification,
164 * to avoid the corresponding overhead. As a hint, the upper-level application
165 * might check the status of the device link once being systematically returned
166 * a 0 value by the receive function of the driver for a given number of tries.
176 #include <rte_interrupts.h>
178 #include <rte_mbuf.h>
179 #include "rte_ether.h"
182 * A structure used to retrieve statistics for an Ethernet port.
184 struct rte_eth_stats {
185 uint64_t ipackets; /**< Total number of successfully received packets. */
186 uint64_t opackets; /**< Total number of successfully transmitted packets.*/
187 uint64_t ibytes; /**< Total number of successfully received bytes. */
188 uint64_t obytes; /**< Total number of successfully transmitted bytes. */
189 uint64_t imissed; /**< Total of RX missed packets (e.g full FIFO). */
190 uint64_t ibadcrc; /**< Total of RX packets with CRC error. */
191 uint64_t ibadlen; /**< Total of RX packets with bad length. */
192 uint64_t ierrors; /**< Total number of erroneous received packets. */
193 uint64_t oerrors; /**< Total number of failed transmitted packets. */
194 uint64_t imcasts; /**< Total number of multicast received packets. */
195 uint64_t rx_nombuf; /**< Total number of RX mbuf allocation failures. */
196 uint64_t fdirmatch; /**< Total number of RX packets matching a filter. */
197 uint64_t fdirmiss; /**< Total number of RX packets not matching any filter. */
198 uint64_t tx_pause_xon; /**< Total nb. of XON pause frame sent. */
199 uint64_t rx_pause_xon; /**< Total nb. of XON pause frame received. */
200 uint64_t tx_pause_xoff; /**< Total nb. of XOFF pause frame sent. */
201 uint64_t rx_pause_xoff; /**< Total nb. of XOFF pause frame received. */
202 uint64_t q_ipackets[RTE_ETHDEV_QUEUE_STAT_CNTRS];
203 /**< Total number of queue RX packets. */
204 uint64_t q_opackets[RTE_ETHDEV_QUEUE_STAT_CNTRS];
205 /**< Total number of queue TX packets. */
206 uint64_t q_ibytes[RTE_ETHDEV_QUEUE_STAT_CNTRS];
207 /**< Total number of successfully received queue bytes. */
208 uint64_t q_obytes[RTE_ETHDEV_QUEUE_STAT_CNTRS];
209 /**< Total number of successfully transmitted queue bytes. */
210 uint64_t q_errors[RTE_ETHDEV_QUEUE_STAT_CNTRS];
211 /**< Total number of queue packets received that are dropped. */
213 /**< Total number of good packets received from loopback,VF Only */
215 /**< Total number of good packets transmitted to loopback,VF Only */
217 /**< Total number of good bytes received from loopback,VF Only */
219 /**< Total number of good bytes transmitted to loopback,VF Only */
223 * A structure used to retrieve link-level information of an Ethernet port.
225 struct rte_eth_link {
226 uint16_t link_speed; /**< ETH_LINK_SPEED_[10, 100, 1000, 10000] */
227 uint16_t link_duplex; /**< ETH_LINK_[HALF_DUPLEX, FULL_DUPLEX] */
228 uint8_t link_status : 1; /**< 1 -> link up, 0 -> link down */
229 }__attribute__((aligned(8))); /**< aligned for atomic64 read/write */
231 #define ETH_LINK_SPEED_AUTONEG 0 /**< Auto-negotiate link speed. */
232 #define ETH_LINK_SPEED_10 10 /**< 10 megabits/second. */
233 #define ETH_LINK_SPEED_100 100 /**< 100 megabits/second. */
234 #define ETH_LINK_SPEED_1000 1000 /**< 1 gigabits/second. */
235 #define ETH_LINK_SPEED_10000 10000 /**< 10 gigabits/second. */
236 #define ETH_LINK_SPEED_10G 10000 /**< alias of 10 gigabits/second. */
237 #define ETH_LINK_SPEED_20G 20000 /**< 20 gigabits/second. */
238 #define ETH_LINK_SPEED_40G 40000 /**< 40 gigabits/second. */
240 #define ETH_LINK_AUTONEG_DUPLEX 0 /**< Auto-negotiate duplex. */
241 #define ETH_LINK_HALF_DUPLEX 1 /**< Half-duplex connection. */
242 #define ETH_LINK_FULL_DUPLEX 2 /**< Full-duplex connection. */
245 * A structure used to configure the ring threshold registers of an RX/TX
246 * queue for an Ethernet port.
248 struct rte_eth_thresh {
249 uint8_t pthresh; /**< Ring prefetch threshold. */
250 uint8_t hthresh; /**< Ring host threshold. */
251 uint8_t wthresh; /**< Ring writeback threshold. */
255 * A set of values to identify what method is to be used to route
256 * packets to multiple queues.
258 enum rte_eth_rx_mq_mode {
259 ETH_MQ_RX_NONE = 0, /**< None of DCB,RSS or VMDQ mode */
261 ETH_MQ_RX_RSS, /**< For RX side, only RSS is on */
262 ETH_MQ_RX_DCB, /**< For RX side,only DCB is on. */
263 ETH_MQ_RX_DCB_RSS, /**< Both DCB and RSS enable */
265 ETH_MQ_RX_VMDQ_ONLY, /**< Only VMDQ, no RSS nor DCB */
266 ETH_MQ_RX_VMDQ_RSS, /**< RSS mode with VMDQ */
267 ETH_MQ_RX_VMDQ_DCB, /**< Use VMDQ+DCB to route traffic to queues */
268 ETH_MQ_RX_VMDQ_DCB_RSS, /**< Enable both VMDQ and DCB in VMDq */
272 * for rx mq mode backward compatible
274 #define ETH_RSS ETH_MQ_RX_RSS
275 #define VMDQ_DCB ETH_MQ_RX_VMDQ_DCB
276 #define ETH_DCB_RX ETH_MQ_RX_DCB
279 * A set of values to identify what method is to be used to transmit
280 * packets using multi-TCs.
282 enum rte_eth_tx_mq_mode {
283 ETH_MQ_TX_NONE = 0, /**< It is in neither DCB nor VT mode. */
284 ETH_MQ_TX_DCB, /**< For TX side,only DCB is on. */
285 ETH_MQ_TX_VMDQ_DCB, /**< For TX side,both DCB and VT is on. */
286 ETH_MQ_TX_VMDQ_ONLY, /**< Only VT on, no DCB */
290 * for tx mq mode backward compatible
292 #define ETH_DCB_NONE ETH_MQ_TX_NONE
293 #define ETH_VMDQ_DCB_TX ETH_MQ_TX_VMDQ_DCB
294 #define ETH_DCB_TX ETH_MQ_TX_DCB
297 * A structure used to configure the RX features of an Ethernet port.
299 struct rte_eth_rxmode {
300 /** The multi-queue packet distribution mode to be used, e.g. RSS. */
301 enum rte_eth_rx_mq_mode mq_mode;
302 uint32_t max_rx_pkt_len; /**< Only used if jumbo_frame enabled. */
303 uint16_t split_hdr_size; /**< hdr buf size (header_split enabled).*/
304 uint8_t header_split : 1, /**< Header Split enable. */
305 hw_ip_checksum : 1, /**< IP/UDP/TCP checksum offload enable. */
306 hw_vlan_filter : 1, /**< VLAN filter enable. */
307 hw_vlan_strip : 1, /**< VLAN strip enable. */
308 hw_vlan_extend : 1, /**< Extended VLAN enable. */
309 jumbo_frame : 1, /**< Jumbo Frame Receipt enable. */
310 hw_strip_crc : 1, /**< Enable CRC stripping by hardware. */
311 enable_scatter : 1; /**< Enable scatter packets rx handler */
315 * A structure used to configure the Receive Side Scaling (RSS) feature
316 * of an Ethernet port.
317 * If not NULL, the *rss_key* pointer of the *rss_conf* structure points
318 * to an array holding the RSS key to use for hashing specific header
319 * fields of received packets. The length of this array should be indicated
320 * by *rss_key_len* below. Otherwise, a default random hash key is used by
323 * The *rss_key_len* field of the *rss_conf* structure indicates the length
324 * in bytes of the array pointed by *rss_key*. To be compatible, this length
325 * will be checked in i40e only. Others assume 40 bytes to be used as before.
327 * The *rss_hf* field of the *rss_conf* structure indicates the different
328 * types of IPv4/IPv6 packets to which the RSS hashing must be applied.
329 * Supplying an *rss_hf* equal to zero disables the RSS feature.
331 struct rte_eth_rss_conf {
332 uint8_t *rss_key; /**< If not NULL, 40-byte hash key. */
333 uint8_t rss_key_len; /**< hash key length in bytes. */
334 uint64_t rss_hf; /**< Hash functions to apply - see below. */
337 /* Supported RSS offloads */
339 #define ETH_RSS_IPV4_SHIFT 0
340 #define ETH_RSS_IPV4_TCP_SHIFT 1
341 #define ETH_RSS_IPV6_SHIFT 2
342 #define ETH_RSS_IPV6_EX_SHIFT 3
343 #define ETH_RSS_IPV6_TCP_SHIFT 4
344 #define ETH_RSS_IPV6_TCP_EX_SHIFT 5
345 #define ETH_RSS_IPV4_UDP_SHIFT 6
346 #define ETH_RSS_IPV6_UDP_SHIFT 7
347 #define ETH_RSS_IPV6_UDP_EX_SHIFT 8
349 #define ETH_RSS_NONF_IPV4_UDP_SHIFT 31
350 #define ETH_RSS_NONF_IPV4_TCP_SHIFT 33
351 #define ETH_RSS_NONF_IPV4_SCTP_SHIFT 34
352 #define ETH_RSS_NONF_IPV4_OTHER_SHIFT 35
353 #define ETH_RSS_FRAG_IPV4_SHIFT 36
354 #define ETH_RSS_NONF_IPV6_UDP_SHIFT 41
355 #define ETH_RSS_NONF_IPV6_TCP_SHIFT 43
356 #define ETH_RSS_NONF_IPV6_SCTP_SHIFT 44
357 #define ETH_RSS_NONF_IPV6_OTHER_SHIFT 45
358 #define ETH_RSS_FRAG_IPV6_SHIFT 46
359 #define ETH_RSS_FCOE_OX_SHIFT 48
360 #define ETH_RSS_FCOE_RX_SHIFT 49
361 #define ETH_RSS_FCOE_OTHER_SHIFT 50
362 #define ETH_RSS_L2_PAYLOAD_SHIFT 63
365 #define ETH_RSS_IPV4 ((uint16_t)1 << ETH_RSS_IPV4_SHIFT)
366 #define ETH_RSS_IPV4_TCP ((uint16_t)1 << ETH_RSS_IPV4_TCP_SHIFT)
367 #define ETH_RSS_IPV6 ((uint16_t)1 << ETH_RSS_IPV6_SHIFT)
368 #define ETH_RSS_IPV6_EX ((uint16_t)1 << ETH_RSS_IPV6_EX_SHIFT)
369 #define ETH_RSS_IPV6_TCP ((uint16_t)1 << ETH_RSS_IPV6_TCP_SHIFT)
370 #define ETH_RSS_IPV6_TCP_EX ((uint16_t)1 << ETH_RSS_IPV6_TCP_EX_SHIFT)
371 #define ETH_RSS_IPV4_UDP ((uint16_t)1 << ETH_RSS_IPV4_UDP_SHIFT)
372 #define ETH_RSS_IPV6_UDP ((uint16_t)1 << ETH_RSS_IPV6_UDP_SHIFT)
373 #define ETH_RSS_IPV6_UDP_EX ((uint16_t)1 << ETH_RSS_IPV6_UDP_EX_SHIFT)
375 #define ETH_RSS_NONF_IPV4_UDP ((uint64_t)1 << ETH_RSS_NONF_IPV4_UDP_SHIFT)
376 #define ETH_RSS_NONF_IPV4_TCP ((uint64_t)1 << ETH_RSS_NONF_IPV4_TCP_SHIFT)
377 #define ETH_RSS_NONF_IPV4_SCTP ((uint64_t)1 << ETH_RSS_NONF_IPV4_SCTP_SHIFT)
378 #define ETH_RSS_NONF_IPV4_OTHER ((uint64_t)1 << ETH_RSS_NONF_IPV4_OTHER_SHIFT)
379 #define ETH_RSS_FRAG_IPV4 ((uint64_t)1 << ETH_RSS_FRAG_IPV4_SHIFT)
380 #define ETH_RSS_NONF_IPV6_UDP ((uint64_t)1 << ETH_RSS_NONF_IPV6_UDP_SHIFT)
381 #define ETH_RSS_NONF_IPV6_TCP ((uint64_t)1 << ETH_RSS_NONF_IPV6_TCP_SHIFT)
382 #define ETH_RSS_NONF_IPV6_SCTP ((uint64_t)1 << ETH_RSS_NONF_IPV6_SCTP_SHIFT)
383 #define ETH_RSS_NONF_IPV6_OTHER ((uint64_t)1 << ETH_RSS_NONF_IPV6_OTHER_SHIFT)
384 #define ETH_RSS_FRAG_IPV6 ((uint64_t)1 << ETH_RSS_FRAG_IPV6_SHIFT)
385 #define ETH_RSS_FCOE_OX ((uint64_t)1 << ETH_RSS_FCOE_OX_SHIFT) /* not used */
386 #define ETH_RSS_FCOE_RX ((uint64_t)1 << ETH_RSS_FCOE_RX_SHIFT) /* not used */
387 #define ETH_RSS_FCOE_OTHER ((uint64_t)1 << ETH_RSS_FCOE_OTHER_SHIFT) /* not used */
388 #define ETH_RSS_L2_PAYLOAD ((uint64_t)1 << ETH_RSS_L2_PAYLOAD_SHIFT)
390 #define ETH_RSS_IP ( \
393 ETH_RSS_NONF_IPV4_OTHER | \
394 ETH_RSS_FRAG_IPV4 | \
395 ETH_RSS_NONF_IPV6_OTHER | \
397 #define ETH_RSS_UDP ( \
402 ETH_RSS_IPV6_UDP_EX | \
403 ETH_RSS_NONF_IPV4_UDP | \
404 ETH_RSS_NONF_IPV6_UDP)
405 /**< Mask of valid RSS hash protocols */
406 #define ETH_RSS_PROTO_MASK ( \
412 ETH_RSS_IPV6_TCP_EX | \
415 ETH_RSS_IPV6_UDP_EX | \
416 ETH_RSS_NONF_IPV4_UDP | \
417 ETH_RSS_NONF_IPV4_TCP | \
418 ETH_RSS_NONF_IPV4_SCTP | \
419 ETH_RSS_NONF_IPV4_OTHER | \
420 ETH_RSS_FRAG_IPV4 | \
421 ETH_RSS_NONF_IPV6_UDP | \
422 ETH_RSS_NONF_IPV6_TCP | \
423 ETH_RSS_NONF_IPV6_SCTP | \
424 ETH_RSS_NONF_IPV6_OTHER | \
425 ETH_RSS_FRAG_IPV6 | \
428 /* Definitions used for redirection table entry size */
429 #define ETH_RSS_RETA_NUM_ENTRIES 128
430 #define ETH_RSS_RETA_MAX_QUEUE 16
432 /* Definitions used for VMDQ and DCB functionality */
433 #define ETH_VMDQ_MAX_VLAN_FILTERS 64 /**< Maximum nb. of VMDQ vlan filters. */
434 #define ETH_DCB_NUM_USER_PRIORITIES 8 /**< Maximum nb. of DCB priorities. */
435 #define ETH_VMDQ_DCB_NUM_QUEUES 128 /**< Maximum nb. of VMDQ DCB queues. */
436 #define ETH_DCB_NUM_QUEUES 128 /**< Maximum nb. of DCB queues. */
438 /* DCB capability defines */
439 #define ETH_DCB_PG_SUPPORT 0x00000001 /**< Priority Group(ETS) support. */
440 #define ETH_DCB_PFC_SUPPORT 0x00000002 /**< Priority Flow Control support. */
442 /* Definitions used for VLAN Offload functionality */
443 #define ETH_VLAN_STRIP_OFFLOAD 0x0001 /**< VLAN Strip On/Off */
444 #define ETH_VLAN_FILTER_OFFLOAD 0x0002 /**< VLAN Filter On/Off */
445 #define ETH_VLAN_EXTEND_OFFLOAD 0x0004 /**< VLAN Extend On/Off */
447 /* Definitions used for mask VLAN setting */
448 #define ETH_VLAN_STRIP_MASK 0x0001 /**< VLAN Strip setting mask */
449 #define ETH_VLAN_FILTER_MASK 0x0002 /**< VLAN Filter setting mask*/
450 #define ETH_VLAN_EXTEND_MASK 0x0004 /**< VLAN Extend setting mask*/
451 #define ETH_VLAN_ID_MAX 0x0FFF /**< VLAN ID is in lower 12 bits*/
453 /* Definitions used for receive MAC address */
454 #define ETH_NUM_RECEIVE_MAC_ADDR 128 /**< Maximum nb. of receive mac addr. */
456 /* Definitions used for unicast hash */
457 #define ETH_VMDQ_NUM_UC_HASH_ARRAY 128 /**< Maximum nb. of UC hash array. */
459 /* Definitions used for VMDQ pool rx mode setting */
460 #define ETH_VMDQ_ACCEPT_UNTAG 0x0001 /**< accept untagged packets. */
461 #define ETH_VMDQ_ACCEPT_HASH_MC 0x0002 /**< accept packets in multicast table . */
462 #define ETH_VMDQ_ACCEPT_HASH_UC 0x0004 /**< accept packets in unicast table. */
463 #define ETH_VMDQ_ACCEPT_BROADCAST 0x0008 /**< accept broadcast packets. */
464 #define ETH_VMDQ_ACCEPT_MULTICAST 0x0010 /**< multicast promiscuous. */
466 /* Definitions used for VMDQ mirror rules setting */
467 #define ETH_VMDQ_NUM_MIRROR_RULE 4 /**< Maximum nb. of mirror rules. . */
469 #define ETH_VMDQ_POOL_MIRROR 0x0001 /**< Virtual Pool Mirroring. */
470 #define ETH_VMDQ_UPLINK_MIRROR 0x0002 /**< Uplink Port Mirroring. */
471 #define ETH_VMDQ_DOWNLIN_MIRROR 0x0004 /**< Downlink Port Mirroring. */
472 #define ETH_VMDQ_VLAN_MIRROR 0x0008 /**< VLAN Mirroring. */
475 * A structure used to configure VLAN traffic mirror of an Ethernet port.
477 struct rte_eth_vlan_mirror {
478 uint64_t vlan_mask; /**< mask for valid VLAN ID. */
479 uint16_t vlan_id[ETH_VMDQ_MAX_VLAN_FILTERS];
480 /** VLAN ID list for vlan mirror. */
484 * A structure used to configure traffic mirror of an Ethernet port.
486 struct rte_eth_vmdq_mirror_conf {
487 uint8_t rule_type_mask; /**< Mirroring rule type mask we want to set */
488 uint8_t dst_pool; /**< Destination pool for this mirror rule. */
489 uint64_t pool_mask; /**< Bitmap of pool for pool mirroring */
490 struct rte_eth_vlan_mirror vlan; /**< VLAN ID setting for VLAN mirroring */
494 * A structure used to configure Redirection Table of the Receive Side
495 * Scaling (RSS) feature of an Ethernet port.
497 struct rte_eth_rss_reta {
498 /** First 64 mask bits indicate which entry(s) need to updated/queried. */
500 /** Second 64 mask bits indicate which entry(s) need to updated/queried. */
502 uint8_t reta[ETH_RSS_RETA_NUM_ENTRIES]; /**< 128 RETA entries*/
506 * This enum indicates the possible number of traffic classes
507 * in DCB configratioins
509 enum rte_eth_nb_tcs {
510 ETH_4_TCS = 4, /**< 4 TCs with DCB. */
511 ETH_8_TCS = 8 /**< 8 TCs with DCB. */
515 * This enum indicates the possible number of queue pools
516 * in VMDQ configurations.
518 enum rte_eth_nb_pools {
519 ETH_8_POOLS = 8, /**< 8 VMDq pools. */
520 ETH_16_POOLS = 16, /**< 16 VMDq pools. */
521 ETH_32_POOLS = 32, /**< 32 VMDq pools. */
522 ETH_64_POOLS = 64 /**< 64 VMDq pools. */
525 /* This structure may be extended in future. */
526 struct rte_eth_dcb_rx_conf {
527 enum rte_eth_nb_tcs nb_tcs; /**< Possible DCB TCs, 4 or 8 TCs */
528 uint8_t dcb_queue[ETH_DCB_NUM_USER_PRIORITIES];
529 /**< Possible DCB queue,4 or 8. */
532 struct rte_eth_vmdq_dcb_tx_conf {
533 enum rte_eth_nb_pools nb_queue_pools; /**< With DCB, 16 or 32 pools. */
534 uint8_t dcb_queue[ETH_DCB_NUM_USER_PRIORITIES];
535 /**< Possible DCB queue,4 or 8. */
538 struct rte_eth_dcb_tx_conf {
539 enum rte_eth_nb_tcs nb_tcs; /**< Possible DCB TCs, 4 or 8 TCs. */
540 uint8_t dcb_queue[ETH_DCB_NUM_USER_PRIORITIES];
541 /**< Possible DCB queue,4 or 8. */
544 struct rte_eth_vmdq_tx_conf {
545 enum rte_eth_nb_pools nb_queue_pools; /**< VMDq mode, 64 pools. */
549 * A structure used to configure the VMDQ+DCB feature
550 * of an Ethernet port.
552 * Using this feature, packets are routed to a pool of queues, based
553 * on the vlan id in the vlan tag, and then to a specific queue within
554 * that pool, using the user priority vlan tag field.
556 * A default pool may be used, if desired, to route all traffic which
557 * does not match the vlan filter rules.
559 struct rte_eth_vmdq_dcb_conf {
560 enum rte_eth_nb_pools nb_queue_pools; /**< With DCB, 16 or 32 pools */
561 uint8_t enable_default_pool; /**< If non-zero, use a default pool */
562 uint8_t default_pool; /**< The default pool, if applicable */
563 uint8_t nb_pool_maps; /**< We can have up to 64 filters/mappings */
565 uint16_t vlan_id; /**< The vlan id of the received frame */
566 uint64_t pools; /**< Bitmask of pools for packet rx */
567 } pool_map[ETH_VMDQ_MAX_VLAN_FILTERS]; /**< VMDq vlan pool maps. */
568 uint8_t dcb_queue[ETH_DCB_NUM_USER_PRIORITIES];
569 /**< Selects a queue in a pool */
572 struct rte_eth_vmdq_rx_conf {
573 enum rte_eth_nb_pools nb_queue_pools; /**< VMDq only mode, 8 or 64 pools */
574 uint8_t enable_default_pool; /**< If non-zero, use a default pool */
575 uint8_t default_pool; /**< The default pool, if applicable */
576 uint8_t enable_loop_back; /**< Enable VT loop back */
577 uint8_t nb_pool_maps; /**< We can have up to 64 filters/mappings */
579 uint16_t vlan_id; /**< The vlan id of the received frame */
580 uint64_t pools; /**< Bitmask of pools for packet rx */
581 } pool_map[ETH_VMDQ_MAX_VLAN_FILTERS]; /**< VMDq vlan pool maps. */
585 * A structure used to configure the TX features of an Ethernet port.
587 struct rte_eth_txmode {
588 enum rte_eth_tx_mq_mode mq_mode; /**< TX multi-queues mode. */
590 /* For i40e specifically */
592 uint8_t hw_vlan_reject_tagged : 1,
593 /**< If set, reject sending out tagged pkts */
594 hw_vlan_reject_untagged : 1,
595 /**< If set, reject sending out untagged pkts */
596 hw_vlan_insert_pvid : 1;
597 /**< If set, enable port based VLAN insertion */
601 * A structure used to configure an RX ring of an Ethernet port.
603 struct rte_eth_rxconf {
604 struct rte_eth_thresh rx_thresh; /**< RX ring threshold registers. */
605 uint16_t rx_free_thresh; /**< Drives the freeing of RX descriptors. */
606 uint8_t rx_drop_en; /**< Drop packets if no descriptors are available. */
607 uint8_t rx_deferred_start; /**< Do not start queue with rte_eth_dev_start(). */
610 #define ETH_TXQ_FLAGS_NOMULTSEGS 0x0001 /**< nb_segs=1 for all mbufs */
611 #define ETH_TXQ_FLAGS_NOREFCOUNT 0x0002 /**< refcnt can be ignored */
612 #define ETH_TXQ_FLAGS_NOMULTMEMP 0x0004 /**< all bufs come from same mempool */
613 #define ETH_TXQ_FLAGS_NOVLANOFFL 0x0100 /**< disable VLAN offload */
614 #define ETH_TXQ_FLAGS_NOXSUMSCTP 0x0200 /**< disable SCTP checksum offload */
615 #define ETH_TXQ_FLAGS_NOXSUMUDP 0x0400 /**< disable UDP checksum offload */
616 #define ETH_TXQ_FLAGS_NOXSUMTCP 0x0800 /**< disable TCP checksum offload */
617 #define ETH_TXQ_FLAGS_NOOFFLOADS \
618 (ETH_TXQ_FLAGS_NOVLANOFFL | ETH_TXQ_FLAGS_NOXSUMSCTP | \
619 ETH_TXQ_FLAGS_NOXSUMUDP | ETH_TXQ_FLAGS_NOXSUMTCP)
621 * A structure used to configure a TX ring of an Ethernet port.
623 struct rte_eth_txconf {
624 struct rte_eth_thresh tx_thresh; /**< TX ring threshold registers. */
625 uint16_t tx_rs_thresh; /**< Drives the setting of RS bit on TXDs. */
626 uint16_t tx_free_thresh; /**< Drives the freeing of TX buffers. */
627 uint32_t txq_flags; /**< Set flags for the Tx queue */
628 uint8_t tx_deferred_start; /**< Do not start queue with rte_eth_dev_start(). */
632 * This enum indicates the flow control mode
634 enum rte_eth_fc_mode {
635 RTE_FC_NONE = 0, /**< Disable flow control. */
636 RTE_FC_RX_PAUSE, /**< RX pause frame, enable flowctrl on TX side. */
637 RTE_FC_TX_PAUSE, /**< TX pause frame, enable flowctrl on RX side. */
638 RTE_FC_FULL /**< Enable flow control on both side. */
642 * A structure used to configure Ethernet flow control parameter.
643 * These parameters will be configured into the register of the NIC.
644 * Please refer to the corresponding data sheet for proper value.
646 struct rte_eth_fc_conf {
647 uint32_t high_water; /**< High threshold value to trigger XOFF */
648 uint32_t low_water; /**< Low threshold value to trigger XON */
649 uint16_t pause_time; /**< Pause quota in the Pause frame */
650 uint16_t send_xon; /**< Is XON frame need be sent */
651 enum rte_eth_fc_mode mode; /**< Link flow control mode */
652 uint8_t mac_ctrl_frame_fwd; /**< Forward MAC control frames */
653 uint8_t autoneg; /**< Use Pause autoneg */
657 * A structure used to configure Ethernet priority flow control parameter.
658 * These parameters will be configured into the register of the NIC.
659 * Please refer to the corresponding data sheet for proper value.
661 struct rte_eth_pfc_conf {
662 struct rte_eth_fc_conf fc; /**< General flow control parameter. */
663 uint8_t priority; /**< VLAN User Priority. */
667 * Flow Director setting modes: none (default), signature or perfect.
670 RTE_FDIR_MODE_NONE = 0, /**< Disable FDIR support. */
671 RTE_FDIR_MODE_SIGNATURE, /**< Enable FDIR signature filter mode. */
672 RTE_FDIR_MODE_PERFECT, /**< Enable FDIR perfect filter mode. */
676 * Memory space that can be configured to store Flow Director filters
677 * in the board memory.
679 enum rte_fdir_pballoc_type {
680 RTE_FDIR_PBALLOC_64K = 0, /**< 64k. */
681 RTE_FDIR_PBALLOC_128K, /**< 128k. */
682 RTE_FDIR_PBALLOC_256K, /**< 256k. */
686 * Select report mode of FDIR hash information in RX descriptors.
688 enum rte_fdir_status_mode {
689 RTE_FDIR_NO_REPORT_STATUS = 0, /**< Never report FDIR hash. */
690 RTE_FDIR_REPORT_STATUS, /**< Only report FDIR hash for matching pkts. */
691 RTE_FDIR_REPORT_STATUS_ALWAYS, /**< Always report FDIR hash. */
695 * A structure used to configure the Flow Director (FDIR) feature
696 * of an Ethernet port.
698 * If mode is RTE_FDIR_DISABLE, the pballoc value is ignored.
700 struct rte_fdir_conf {
701 enum rte_fdir_mode mode; /**< Flow Director mode. */
702 enum rte_fdir_pballoc_type pballoc; /**< Space for FDIR filters. */
703 enum rte_fdir_status_mode status; /**< How to report FDIR hash. */
704 /** Offset of flexbytes field in RX packets (in 16-bit word units). */
705 uint8_t flexbytes_offset;
706 /** RX queue of packets matching a "drop" filter in perfect mode. */
711 * Possible l4type of FDIR filters.
714 RTE_FDIR_L4TYPE_NONE = 0, /**< None. */
715 RTE_FDIR_L4TYPE_UDP, /**< UDP. */
716 RTE_FDIR_L4TYPE_TCP, /**< TCP. */
717 RTE_FDIR_L4TYPE_SCTP, /**< SCTP. */
721 * Select IPv4 or IPv6 FDIR filters.
724 RTE_FDIR_IPTYPE_IPV4 = 0, /**< IPv4. */
725 RTE_FDIR_IPTYPE_IPV6 , /**< IPv6. */
729 * A structure used to define a FDIR packet filter.
731 struct rte_fdir_filter {
732 uint16_t flex_bytes; /**< Flex bytes value to match. */
733 uint16_t vlan_id; /**< VLAN ID value to match, 0 otherwise. */
734 uint16_t port_src; /**< Source port to match, 0 otherwise. */
735 uint16_t port_dst; /**< Destination port to match, 0 otherwise. */
737 uint32_t ipv4_addr; /**< IPv4 source address to match. */
738 uint32_t ipv6_addr[4]; /**< IPv6 source address to match. */
739 } ip_src; /**< IPv4/IPv6 source address to match (union of above). */
741 uint32_t ipv4_addr; /**< IPv4 destination address to match. */
742 uint32_t ipv6_addr[4]; /**< IPv6 destination address to match */
743 } ip_dst; /**< IPv4/IPv6 destination address to match (union of above). */
744 enum rte_l4type l4type; /**< l4type to match: NONE/UDP/TCP/SCTP. */
745 enum rte_iptype iptype; /**< IP packet type to match: IPv4 or IPv6. */
749 * A structure used to configure FDIR masks that are used by the device
750 * to match the various fields of RX packet headers.
751 * @note The only_ip_flow field has the opposite meaning compared to other
754 struct rte_fdir_masks {
755 /** When set to 1, packet l4type is \b NOT relevant in filters, and
756 source and destination port masks must be set to zero. */
757 uint8_t only_ip_flow;
758 /** If set to 1, vlan_id is relevant in filters. */
760 /** If set to 1, vlan_prio is relevant in filters. */
762 /** If set to 1, flexbytes is relevant in filters. */
764 /** If set to 1, set the IPv6 masks. Otherwise set the IPv4 masks. */
765 uint8_t set_ipv6_mask;
766 /** When set to 1, comparison of destination IPv6 address with IP6AT
767 registers is meaningful. */
768 uint8_t comp_ipv6_dst;
769 /** Mask of Destination IPv4 Address. All bits set to 1 define the
770 relevant bits to use in the destination address of an IPv4 packet
771 when matching it against FDIR filters. */
772 uint32_t dst_ipv4_mask;
773 /** Mask of Source IPv4 Address. All bits set to 1 define
774 the relevant bits to use in the source address of an IPv4 packet
775 when matching it against FDIR filters. */
776 uint32_t src_ipv4_mask;
777 /** Mask of Source IPv6 Address. All bits set to 1 define the
778 relevant BYTES to use in the source address of an IPv6 packet
779 when matching it against FDIR filters. */
780 uint16_t dst_ipv6_mask;
781 /** Mask of Destination IPv6 Address. All bits set to 1 define the
782 relevant BYTES to use in the destination address of an IPv6 packet
783 when matching it against FDIR filters. */
784 uint16_t src_ipv6_mask;
785 /** Mask of Source Port. All bits set to 1 define the relevant
786 bits to use in the source port of an IP packets when matching it
787 against FDIR filters. */
788 uint16_t src_port_mask;
789 /** Mask of Destination Port. All bits set to 1 define the relevant
790 bits to use in the destination port of an IP packet when matching it
791 against FDIR filters. */
792 uint16_t dst_port_mask;
796 * A structure used to report the status of the flow director filters in use.
798 struct rte_eth_fdir {
799 /** Number of filters with collision indication. */
801 /** Number of free (non programmed) filters. */
803 /** The Lookup hash value of the added filter that updated the value
804 of the MAXLEN field */
806 /** Longest linked list of filters in the table. */
808 /** Number of added filters. */
810 /** Number of removed filters. */
812 /** Number of failed added filters (no more space in device). */
814 /** Number of failed removed filters. */
819 * A structure used to enable/disable specific device interrupts.
821 struct rte_intr_conf {
822 /** enable/disable lsc interrupt. 0 (default) - disable, 1 enable */
827 * A structure used to configure an Ethernet port.
828 * Depending upon the RX multi-queue mode, extra advanced
829 * configuration settings may be needed.
831 struct rte_eth_conf {
833 /**< ETH_LINK_SPEED_10[0|00|000], or 0 for autonegotation */
834 uint16_t link_duplex;
835 /**< ETH_LINK_[HALF_DUPLEX|FULL_DUPLEX], or 0 for autonegotation */
836 struct rte_eth_rxmode rxmode; /**< Port RX configuration. */
837 struct rte_eth_txmode txmode; /**< Port TX configuration. */
838 uint32_t lpbk_mode; /**< Loopback operation mode. By default the value
839 is 0, meaning the loopback mode is disabled.
840 Read the datasheet of given ethernet controller
841 for details. The possible values of this field
842 are defined in implementation of each driver. */
844 struct rte_eth_rss_conf rss_conf; /**< Port RSS configuration */
845 struct rte_eth_vmdq_dcb_conf vmdq_dcb_conf;
846 /**< Port vmdq+dcb configuration. */
847 struct rte_eth_dcb_rx_conf dcb_rx_conf;
848 /**< Port dcb RX configuration. */
849 struct rte_eth_vmdq_rx_conf vmdq_rx_conf;
850 /**< Port vmdq RX configuration. */
851 } rx_adv_conf; /**< Port RX filtering configuration (union). */
853 struct rte_eth_vmdq_dcb_tx_conf vmdq_dcb_tx_conf;
854 /**< Port vmdq+dcb TX configuration. */
855 struct rte_eth_dcb_tx_conf dcb_tx_conf;
856 /**< Port dcb TX configuration. */
857 struct rte_eth_vmdq_tx_conf vmdq_tx_conf;
858 /**< Port vmdq TX configuration. */
859 } tx_adv_conf; /**< Port TX DCB configuration (union). */
860 /** Currently,Priority Flow Control(PFC) are supported,if DCB with PFC
861 is needed,and the variable must be set ETH_DCB_PFC_SUPPORT. */
862 uint32_t dcb_capability_en;
863 struct rte_fdir_conf fdir_conf; /**< FDIR configuration. */
864 struct rte_intr_conf intr_conf; /**< Interrupt mode configuration. */
868 * A structure used to retrieve the contextual information of
869 * an Ethernet device, such as the controlling driver of the device,
870 * its PCI context, etc...
874 * RX offload capabilities of a device.
876 #define DEV_RX_OFFLOAD_VLAN_STRIP 0x00000001
877 #define DEV_RX_OFFLOAD_IPV4_CKSUM 0x00000002
878 #define DEV_RX_OFFLOAD_UDP_CKSUM 0x00000004
879 #define DEV_RX_OFFLOAD_TCP_CKSUM 0x00000008
880 #define DEV_RX_OFFLOAD_TCP_LRO 0x00000010
883 * TX offload capabilities of a device.
885 #define DEV_TX_OFFLOAD_VLAN_INSERT 0x00000001
886 #define DEV_TX_OFFLOAD_IPV4_CKSUM 0x00000002
887 #define DEV_TX_OFFLOAD_UDP_CKSUM 0x00000004
888 #define DEV_TX_OFFLOAD_TCP_CKSUM 0x00000008
889 #define DEV_TX_OFFLOAD_SCTP_CKSUM 0x00000010
890 #define DEV_TX_OFFLOAD_TCP_TSO 0x00000020
891 #define DEV_TX_OFFLOAD_UDP_TSO 0x00000040
893 struct rte_eth_dev_info {
894 struct rte_pci_device *pci_dev; /**< Device PCI information. */
895 const char *driver_name; /**< Device Driver name. */
896 unsigned int if_index; /**< Index to bound host interface, or 0 if none.
897 Use if_indextoname() to translate into an interface name. */
898 uint32_t min_rx_bufsize; /**< Minimum size of RX buffer. */
899 uint32_t max_rx_pktlen; /**< Maximum configurable length of RX pkt. */
900 uint16_t max_rx_queues; /**< Maximum number of RX queues. */
901 uint16_t max_tx_queues; /**< Maximum number of TX queues. */
902 uint32_t max_mac_addrs; /**< Maximum number of MAC addresses. */
903 uint32_t max_hash_mac_addrs;
904 /** Maximum number of hash MAC addresses for MTA and UTA. */
905 uint16_t max_vfs; /**< Maximum number of VFs. */
906 uint16_t max_vmdq_pools; /**< Maximum number of VMDq pools. */
907 uint32_t rx_offload_capa; /**< Device RX offload capabilities. */
908 uint32_t tx_offload_capa; /**< Device TX offload capabilities. */
909 struct rte_eth_rxconf default_rxconf; /**< Default RX configuration */
910 struct rte_eth_txconf default_txconf; /**< Default TX configuration */
913 /** Maximum name length for extended statistics counters */
914 #define RTE_ETH_XSTATS_NAME_SIZE 64
917 * An Ethernet device extended statistic structure
919 * This structure is used by ethdev->eth_xstats_get() to provide
920 * statistics that are not provided in the generic rte_eth_stats
923 struct rte_eth_xstats {
924 char name[RTE_ETH_XSTATS_NAME_SIZE];
930 struct rte_eth_dev_callback;
931 /** @internal Structure to keep track of registered callbacks */
932 TAILQ_HEAD(rte_eth_dev_cb_list, rte_eth_dev_callback);
934 #define TCP_UGR_FLAG 0x20
935 #define TCP_ACK_FLAG 0x10
936 #define TCP_PSH_FLAG 0x08
937 #define TCP_RST_FLAG 0x04
938 #define TCP_SYN_FLAG 0x02
939 #define TCP_FIN_FLAG 0x01
940 #define TCP_FLAG_ALL 0x3F
943 * A structure used to define an ethertype filter.
945 struct rte_ethertype_filter {
946 uint16_t ethertype; /**< little endian. */
947 uint8_t priority_en; /**< compare priority enable. */
952 * A structure used to define an syn filter.
954 struct rte_syn_filter {
955 uint8_t hig_pri; /**< 1 means higher pri than 2tuple, 5tupe,
956 and flex filter, 0 means lower pri. */
960 * A structure used to define a 2tuple filter.
962 struct rte_2tuple_filter {
963 uint16_t dst_port; /**< big endian. */
966 uint16_t priority; /**< used when more than one filter matches. */
967 uint8_t dst_port_mask:1, /**< if mask is 1b, means not compare. */
972 * A structure used to define a flex filter.
974 struct rte_flex_filter {
976 uint32_t dwords[32]; /**< flex bytes in big endian. */
977 uint8_t mask[16]; /**< if mask bit is 1b, do not compare
978 corresponding byte in dwords. */
983 * A structure used to define a 5tuple filter.
985 struct rte_5tuple_filter {
986 uint32_t dst_ip; /**< destination IP address in big endian. */
987 uint32_t src_ip; /**< source IP address in big endian. */
988 uint16_t dst_port; /**< destination port in big endian. */
989 uint16_t src_port; /**< source Port big endian. */
990 uint8_t protocol; /**< l4 protocol. */
991 uint8_t tcp_flags; /**< tcp flags. */
992 uint16_t priority; /**< seven evels (001b-111b), 111b is highest,
993 used when more than one filter matches. */
994 uint8_t dst_ip_mask:1, /**< if mask is 1b, do not compare dst ip. */
995 src_ip_mask:1, /**< if mask is 1b, do not compare src ip. */
996 dst_port_mask:1, /**< if mask is 1b, do not compare dst port. */
997 src_port_mask:1, /**< if mask is 1b, do not compare src port. */
998 protocol_mask:1; /**< if mask is 1b, do not compare protocol. */
1002 * Definitions of all functions exported by an Ethernet driver through the
1003 * the generic structure of type *eth_dev_ops* supplied in the *rte_eth_dev*
1004 * structure associated with an Ethernet device.
1007 typedef int (*eth_dev_configure_t)(struct rte_eth_dev *dev);
1008 /**< @internal Ethernet device configuration. */
1010 typedef int (*eth_dev_start_t)(struct rte_eth_dev *dev);
1011 /**< @internal Function used to start a configured Ethernet device. */
1013 typedef void (*eth_dev_stop_t)(struct rte_eth_dev *dev);
1014 /**< @internal Function used to stop a configured Ethernet device. */
1016 typedef int (*eth_dev_set_link_up_t)(struct rte_eth_dev *dev);
1017 /**< @internal Function used to link up a configured Ethernet device. */
1019 typedef int (*eth_dev_set_link_down_t)(struct rte_eth_dev *dev);
1020 /**< @internal Function used to link down a configured Ethernet device. */
1022 typedef void (*eth_dev_close_t)(struct rte_eth_dev *dev);
1023 /**< @internal Function used to close a configured Ethernet device. */
1025 typedef void (*eth_promiscuous_enable_t)(struct rte_eth_dev *dev);
1026 /**< @internal Function used to enable the RX promiscuous mode of an Ethernet device. */
1028 typedef void (*eth_promiscuous_disable_t)(struct rte_eth_dev *dev);
1029 /**< @internal Function used to disable the RX promiscuous mode of an Ethernet device. */
1031 typedef void (*eth_allmulticast_enable_t)(struct rte_eth_dev *dev);
1032 /**< @internal Enable the receipt of all multicast packets by an Ethernet device. */
1034 typedef void (*eth_allmulticast_disable_t)(struct rte_eth_dev *dev);
1035 /**< @internal Disable the receipt of all multicast packets by an Ethernet device. */
1037 typedef int (*eth_link_update_t)(struct rte_eth_dev *dev,
1038 int wait_to_complete);
1039 /**< @internal Get link speed, duplex mode and state (up/down) of an Ethernet device. */
1041 typedef void (*eth_stats_get_t)(struct rte_eth_dev *dev,
1042 struct rte_eth_stats *igb_stats);
1043 /**< @internal Get global I/O statistics of an Ethernet device. */
1045 typedef void (*eth_stats_reset_t)(struct rte_eth_dev *dev);
1046 /**< @internal Reset global I/O statistics of an Ethernet device to 0. */
1048 typedef int (*eth_xstats_get_t)(struct rte_eth_dev *dev,
1049 struct rte_eth_xstats *stats, unsigned n);
1050 /**< @internal Get extended stats of an Ethernet device. */
1052 typedef void (*eth_xstats_reset_t)(struct rte_eth_dev *dev);
1053 /**< @internal Reset extended stats of an Ethernet device. */
1055 typedef int (*eth_queue_stats_mapping_set_t)(struct rte_eth_dev *dev,
1059 /**< @internal Set a queue statistics mapping for a tx/rx queue of an Ethernet device. */
1061 typedef void (*eth_dev_infos_get_t)(struct rte_eth_dev *dev,
1062 struct rte_eth_dev_info *dev_info);
1063 /**< @internal Get specific informations of an Ethernet device. */
1065 typedef int (*eth_queue_start_t)(struct rte_eth_dev *dev,
1067 /**< @internal Start rx and tx of a queue of an Ethernet device. */
1069 typedef int (*eth_queue_stop_t)(struct rte_eth_dev *dev,
1071 /**< @internal Stop rx and tx of a queue of an Ethernet device. */
1073 typedef int (*eth_rx_queue_setup_t)(struct rte_eth_dev *dev,
1074 uint16_t rx_queue_id,
1075 uint16_t nb_rx_desc,
1076 unsigned int socket_id,
1077 const struct rte_eth_rxconf *rx_conf,
1078 struct rte_mempool *mb_pool);
1079 /**< @internal Set up a receive queue of an Ethernet device. */
1081 typedef int (*eth_tx_queue_setup_t)(struct rte_eth_dev *dev,
1082 uint16_t tx_queue_id,
1083 uint16_t nb_tx_desc,
1084 unsigned int socket_id,
1085 const struct rte_eth_txconf *tx_conf);
1086 /**< @internal Setup a transmit queue of an Ethernet device. */
1088 typedef void (*eth_queue_release_t)(void *queue);
1089 /**< @internal Release memory resources allocated by given RX/TX queue. */
1091 typedef uint32_t (*eth_rx_queue_count_t)(struct rte_eth_dev *dev,
1092 uint16_t rx_queue_id);
1093 /**< @Get number of available descriptors on a receive queue of an Ethernet device. */
1095 typedef int (*eth_rx_descriptor_done_t)(void *rxq, uint16_t offset);
1096 /**< @Check DD bit of specific RX descriptor */
1098 typedef int (*mtu_set_t)(struct rte_eth_dev *dev, uint16_t mtu);
1099 /**< @internal Set MTU. */
1101 typedef int (*vlan_filter_set_t)(struct rte_eth_dev *dev,
1104 /**< @internal filtering of a VLAN Tag Identifier by an Ethernet device. */
1106 typedef void (*vlan_tpid_set_t)(struct rte_eth_dev *dev,
1108 /**< @internal set the outer VLAN-TPID by an Ethernet device. */
1110 typedef void (*vlan_offload_set_t)(struct rte_eth_dev *dev, int mask);
1111 /**< @internal set VLAN offload function by an Ethernet device. */
1113 typedef int (*vlan_pvid_set_t)(struct rte_eth_dev *dev,
1116 /**< @internal set port based TX VLAN insertion by an Ethernet device. */
1118 typedef void (*vlan_strip_queue_set_t)(struct rte_eth_dev *dev,
1119 uint16_t rx_queue_id,
1121 /**< @internal VLAN stripping enable/disable by an queue of Ethernet device. */
1123 typedef uint16_t (*eth_rx_burst_t)(void *rxq,
1124 struct rte_mbuf **rx_pkts,
1126 /**< @internal Retrieve input packets from a receive queue of an Ethernet device. */
1128 typedef uint16_t (*eth_tx_burst_t)(void *txq,
1129 struct rte_mbuf **tx_pkts,
1131 /**< @internal Send output packets on a transmit queue of an Ethernet device. */
1133 typedef int (*fdir_add_signature_filter_t)(struct rte_eth_dev *dev,
1134 struct rte_fdir_filter *fdir_ftr,
1136 /**< @internal Setup a new signature filter rule on an Ethernet device */
1138 typedef int (*fdir_update_signature_filter_t)(struct rte_eth_dev *dev,
1139 struct rte_fdir_filter *fdir_ftr,
1141 /**< @internal Update a signature filter rule on an Ethernet device */
1143 typedef int (*fdir_remove_signature_filter_t)(struct rte_eth_dev *dev,
1144 struct rte_fdir_filter *fdir_ftr);
1145 /**< @internal Remove a signature filter rule on an Ethernet device */
1147 typedef void (*fdir_infos_get_t)(struct rte_eth_dev *dev,
1148 struct rte_eth_fdir *fdir);
1149 /**< @internal Get information about fdir status */
1151 typedef int (*fdir_add_perfect_filter_t)(struct rte_eth_dev *dev,
1152 struct rte_fdir_filter *fdir_ftr,
1153 uint16_t soft_id, uint8_t rx_queue,
1155 /**< @internal Setup a new perfect filter rule on an Ethernet device */
1157 typedef int (*fdir_update_perfect_filter_t)(struct rte_eth_dev *dev,
1158 struct rte_fdir_filter *fdir_ftr,
1159 uint16_t soft_id, uint8_t rx_queue,
1161 /**< @internal Update a perfect filter rule on an Ethernet device */
1163 typedef int (*fdir_remove_perfect_filter_t)(struct rte_eth_dev *dev,
1164 struct rte_fdir_filter *fdir_ftr,
1166 /**< @internal Remove a perfect filter rule on an Ethernet device */
1168 typedef int (*fdir_set_masks_t)(struct rte_eth_dev *dev,
1169 struct rte_fdir_masks *fdir_masks);
1170 /**< @internal Setup flow director masks on an Ethernet device */
1172 typedef int (*flow_ctrl_get_t)(struct rte_eth_dev *dev,
1173 struct rte_eth_fc_conf *fc_conf);
1174 /**< @internal Get current flow control parameter on an Ethernet device */
1176 typedef int (*flow_ctrl_set_t)(struct rte_eth_dev *dev,
1177 struct rte_eth_fc_conf *fc_conf);
1178 /**< @internal Setup flow control parameter on an Ethernet device */
1180 typedef int (*priority_flow_ctrl_set_t)(struct rte_eth_dev *dev,
1181 struct rte_eth_pfc_conf *pfc_conf);
1182 /**< @internal Setup priority flow control parameter on an Ethernet device */
1184 typedef int (*reta_update_t)(struct rte_eth_dev *dev,
1185 struct rte_eth_rss_reta *reta_conf);
1186 /**< @internal Update RSS redirection table on an Ethernet device */
1188 typedef int (*reta_query_t)(struct rte_eth_dev *dev,
1189 struct rte_eth_rss_reta *reta_conf);
1190 /**< @internal Query RSS redirection table on an Ethernet device */
1192 typedef int (*rss_hash_update_t)(struct rte_eth_dev *dev,
1193 struct rte_eth_rss_conf *rss_conf);
1194 /**< @internal Update RSS hash configuration of an Ethernet device */
1196 typedef int (*rss_hash_conf_get_t)(struct rte_eth_dev *dev,
1197 struct rte_eth_rss_conf *rss_conf);
1198 /**< @internal Get current RSS hash configuration of an Ethernet device */
1200 typedef int (*eth_dev_led_on_t)(struct rte_eth_dev *dev);
1201 /**< @internal Turn on SW controllable LED on an Ethernet device */
1203 typedef int (*eth_dev_led_off_t)(struct rte_eth_dev *dev);
1204 /**< @internal Turn off SW controllable LED on an Ethernet device */
1206 typedef void (*eth_mac_addr_remove_t)(struct rte_eth_dev *dev, uint32_t index);
1207 /**< @internal Remove MAC address from receive address register */
1209 typedef void (*eth_mac_addr_add_t)(struct rte_eth_dev *dev,
1210 struct ether_addr *mac_addr,
1213 /**< @internal Set a MAC address into Receive Address Address Register */
1215 typedef int (*eth_uc_hash_table_set_t)(struct rte_eth_dev *dev,
1216 struct ether_addr *mac_addr,
1218 /**< @internal Set a Unicast Hash bitmap */
1220 typedef int (*eth_uc_all_hash_table_set_t)(struct rte_eth_dev *dev,
1222 /**< @internal Set all Unicast Hash bitmap */
1224 typedef int (*eth_set_vf_rx_mode_t)(struct rte_eth_dev *dev,
1228 /**< @internal Set a VF receive mode */
1230 typedef int (*eth_set_vf_rx_t)(struct rte_eth_dev *dev,
1233 /**< @internal Set a VF receive mode */
1235 typedef int (*eth_set_vf_tx_t)(struct rte_eth_dev *dev,
1238 /**< @internal Enable or disable a VF transmit */
1240 typedef int (*eth_set_vf_vlan_filter_t)(struct rte_eth_dev *dev,
1244 /**< @internal Set VF VLAN pool filter */
1246 typedef int (*eth_set_queue_rate_limit_t)(struct rte_eth_dev *dev,
1249 /**< @internal Set queue TX rate */
1251 typedef int (*eth_set_vf_rate_limit_t)(struct rte_eth_dev *dev,
1255 /**< @internal Set VF TX rate */
1257 typedef int (*eth_mirror_rule_set_t)(struct rte_eth_dev *dev,
1258 struct rte_eth_vmdq_mirror_conf *mirror_conf,
1261 /**< @internal Add a traffic mirroring rule on an Ethernet device */
1263 typedef int (*eth_mirror_rule_reset_t)(struct rte_eth_dev *dev,
1265 /**< @internal Remove a traffic mirroring rule on an Ethernet device */
1267 #ifdef RTE_NIC_BYPASS
1270 RTE_BYPASS_MODE_NONE,
1271 RTE_BYPASS_MODE_NORMAL,
1272 RTE_BYPASS_MODE_BYPASS,
1273 RTE_BYPASS_MODE_ISOLATE,
1274 RTE_BYPASS_MODE_NUM,
1277 #define RTE_BYPASS_MODE_VALID(x) \
1278 ((x) > RTE_BYPASS_MODE_NONE && (x) < RTE_BYPASS_MODE_NUM)
1281 RTE_BYPASS_EVENT_NONE,
1282 RTE_BYPASS_EVENT_START,
1283 RTE_BYPASS_EVENT_OS_ON = RTE_BYPASS_EVENT_START,
1284 RTE_BYPASS_EVENT_POWER_ON,
1285 RTE_BYPASS_EVENT_OS_OFF,
1286 RTE_BYPASS_EVENT_POWER_OFF,
1287 RTE_BYPASS_EVENT_TIMEOUT,
1288 RTE_BYPASS_EVENT_NUM
1291 #define RTE_BYPASS_EVENT_VALID(x) \
1292 ((x) > RTE_BYPASS_EVENT_NONE && (x) < RTE_BYPASS_MODE_NUM)
1295 RTE_BYPASS_TMT_OFF, /* timeout disabled. */
1296 RTE_BYPASS_TMT_1_5_SEC, /* timeout for 1.5 seconds */
1297 RTE_BYPASS_TMT_2_SEC, /* timeout for 2 seconds */
1298 RTE_BYPASS_TMT_3_SEC, /* timeout for 3 seconds */
1299 RTE_BYPASS_TMT_4_SEC, /* timeout for 4 seconds */
1300 RTE_BYPASS_TMT_8_SEC, /* timeout for 8 seconds */
1301 RTE_BYPASS_TMT_16_SEC, /* timeout for 16 seconds */
1302 RTE_BYPASS_TMT_32_SEC, /* timeout for 32 seconds */
1306 #define RTE_BYPASS_TMT_VALID(x) \
1307 ((x) == RTE_BYPASS_TMT_OFF || \
1308 ((x) > RTE_BYPASS_TMT_OFF && (x) < RTE_BYPASS_TMT_NUM))
1310 typedef void (*bypass_init_t)(struct rte_eth_dev *dev);
1311 typedef int32_t (*bypass_state_set_t)(struct rte_eth_dev *dev, uint32_t *new_state);
1312 typedef int32_t (*bypass_state_show_t)(struct rte_eth_dev *dev, uint32_t *state);
1313 typedef int32_t (*bypass_event_set_t)(struct rte_eth_dev *dev, uint32_t state, uint32_t event);
1314 typedef int32_t (*bypass_event_show_t)(struct rte_eth_dev *dev, uint32_t event_shift, uint32_t *event);
1315 typedef int32_t (*bypass_wd_timeout_set_t)(struct rte_eth_dev *dev, uint32_t timeout);
1316 typedef int32_t (*bypass_wd_timeout_show_t)(struct rte_eth_dev *dev, uint32_t *wd_timeout);
1317 typedef int32_t (*bypass_ver_show_t)(struct rte_eth_dev *dev, uint32_t *ver);
1318 typedef int32_t (*bypass_wd_reset_t)(struct rte_eth_dev *dev);
1321 typedef int (*eth_add_syn_filter_t)(struct rte_eth_dev *dev,
1322 struct rte_syn_filter *filter, uint16_t rx_queue);
1323 /**< @internal add syn filter rule on an Ethernet device */
1325 typedef int (*eth_remove_syn_filter_t)(struct rte_eth_dev *dev);
1326 /**< @internal remove syn filter rule on an Ethernet device */
1328 typedef int (*eth_get_syn_filter_t)(struct rte_eth_dev *dev,
1329 struct rte_syn_filter *filter, uint16_t *rx_queue);
1330 /**< @internal Get syn filter rule on an Ethernet device */
1332 typedef int (*eth_add_ethertype_filter_t)(struct rte_eth_dev *dev,
1333 uint16_t index, struct rte_ethertype_filter *filter,
1335 /**< @internal Setup a new ethertype filter rule on an Ethernet device */
1337 typedef int (*eth_remove_ethertype_filter_t)(struct rte_eth_dev *dev,
1339 /**< @internal Remove an ethertype filter rule on an Ethernet device */
1341 typedef int (*eth_get_ethertype_filter_t)(struct rte_eth_dev *dev,
1342 uint16_t index, struct rte_ethertype_filter *filter,
1343 uint16_t *rx_queue);
1344 /**< @internal Get an ethertype filter rule on an Ethernet device */
1346 typedef int (*eth_add_2tuple_filter_t)(struct rte_eth_dev *dev,
1347 uint16_t index, struct rte_2tuple_filter *filter,
1349 /**< @internal Setup a new 2tuple filter rule on an Ethernet device */
1351 typedef int (*eth_remove_2tuple_filter_t)(struct rte_eth_dev *dev,
1353 /**< @internal Remove a 2tuple filter rule on an Ethernet device */
1355 typedef int (*eth_get_2tuple_filter_t)(struct rte_eth_dev *dev,
1356 uint16_t index, struct rte_2tuple_filter *filter,
1357 uint16_t *rx_queue);
1358 /**< @internal Get a 2tuple filter rule on an Ethernet device */
1360 typedef int (*eth_add_5tuple_filter_t)(struct rte_eth_dev *dev,
1361 uint16_t index, struct rte_5tuple_filter *filter,
1363 /**< @internal Setup a new 5tuple filter rule on an Ethernet device */
1365 typedef int (*eth_remove_5tuple_filter_t)(struct rte_eth_dev *dev,
1367 /**< @internal Remove a 5tuple filter rule on an Ethernet device */
1369 typedef int (*eth_get_5tuple_filter_t)(struct rte_eth_dev *dev,
1370 uint16_t index, struct rte_5tuple_filter *filter,
1371 uint16_t *rx_queue);
1372 /**< @internal Get a 5tuple filter rule on an Ethernet device */
1374 typedef int (*eth_add_flex_filter_t)(struct rte_eth_dev *dev,
1375 uint16_t index, struct rte_flex_filter *filter,
1377 /**< @internal Setup a new flex filter rule on an Ethernet device */
1379 typedef int (*eth_remove_flex_filter_t)(struct rte_eth_dev *dev,
1381 /**< @internal Remove a flex filter rule on an Ethernet device */
1383 typedef int (*eth_get_flex_filter_t)(struct rte_eth_dev *dev,
1384 uint16_t index, struct rte_flex_filter *filter,
1385 uint16_t *rx_queue);
1386 /**< @internal Get a flex filter rule on an Ethernet device */
1389 * @internal A structure containing the functions exported by an Ethernet driver.
1391 struct eth_dev_ops {
1392 eth_dev_configure_t dev_configure; /**< Configure device. */
1393 eth_dev_start_t dev_start; /**< Start device. */
1394 eth_dev_stop_t dev_stop; /**< Stop device. */
1395 eth_dev_set_link_up_t dev_set_link_up; /**< Device link up. */
1396 eth_dev_set_link_down_t dev_set_link_down; /**< Device link down. */
1397 eth_dev_close_t dev_close; /**< Close device. */
1398 eth_promiscuous_enable_t promiscuous_enable; /**< Promiscuous ON. */
1399 eth_promiscuous_disable_t promiscuous_disable;/**< Promiscuous OFF. */
1400 eth_allmulticast_enable_t allmulticast_enable;/**< RX multicast ON. */
1401 eth_allmulticast_disable_t allmulticast_disable;/**< RX multicast OF. */
1402 eth_link_update_t link_update; /**< Get device link state. */
1403 eth_stats_get_t stats_get; /**< Get generic device statistics. */
1404 eth_stats_reset_t stats_reset; /**< Reset generic device statistics. */
1405 eth_xstats_get_t xstats_get; /**< Get extended device statistics. */
1406 eth_xstats_reset_t xstats_reset; /**< Reset extended device statistics. */
1407 eth_queue_stats_mapping_set_t queue_stats_mapping_set;
1408 /**< Configure per queue stat counter mapping. */
1409 eth_dev_infos_get_t dev_infos_get; /**< Get device info. */
1410 mtu_set_t mtu_set; /**< Set MTU. */
1411 vlan_filter_set_t vlan_filter_set; /**< Filter VLAN Setup. */
1412 vlan_tpid_set_t vlan_tpid_set; /**< Outer VLAN TPID Setup. */
1413 vlan_strip_queue_set_t vlan_strip_queue_set; /**< VLAN Stripping on queue. */
1414 vlan_offload_set_t vlan_offload_set; /**< Set VLAN Offload. */
1415 vlan_pvid_set_t vlan_pvid_set; /**< Set port based TX VLAN insertion */
1416 eth_queue_start_t rx_queue_start;/**< Start RX for a queue.*/
1417 eth_queue_stop_t rx_queue_stop;/**< Stop RX for a queue.*/
1418 eth_queue_start_t tx_queue_start;/**< Start TX for a queue.*/
1419 eth_queue_stop_t tx_queue_stop;/**< Stop TX for a queue.*/
1420 eth_rx_queue_setup_t rx_queue_setup;/**< Set up device RX queue.*/
1421 eth_queue_release_t rx_queue_release;/**< Release RX queue.*/
1422 eth_rx_queue_count_t rx_queue_count; /**< Get Rx queue count. */
1423 eth_rx_descriptor_done_t rx_descriptor_done; /**< Check rxd DD bit */
1424 eth_tx_queue_setup_t tx_queue_setup;/**< Set up device TX queue.*/
1425 eth_queue_release_t tx_queue_release;/**< Release TX queue.*/
1426 eth_dev_led_on_t dev_led_on; /**< Turn on LED. */
1427 eth_dev_led_off_t dev_led_off; /**< Turn off LED. */
1428 flow_ctrl_get_t flow_ctrl_get; /**< Get flow control. */
1429 flow_ctrl_set_t flow_ctrl_set; /**< Setup flow control. */
1430 priority_flow_ctrl_set_t priority_flow_ctrl_set; /**< Setup priority flow control.*/
1431 eth_mac_addr_remove_t mac_addr_remove; /**< Remove MAC address */
1432 eth_mac_addr_add_t mac_addr_add; /**< Add a MAC address */
1433 eth_uc_hash_table_set_t uc_hash_table_set; /**< Set Unicast Table Array */
1434 eth_uc_all_hash_table_set_t uc_all_hash_table_set; /**< Set Unicast hash bitmap */
1435 eth_mirror_rule_set_t mirror_rule_set; /**< Add a traffic mirror rule.*/
1436 eth_mirror_rule_reset_t mirror_rule_reset; /**< reset a traffic mirror rule.*/
1437 eth_set_vf_rx_mode_t set_vf_rx_mode; /**< Set VF RX mode */
1438 eth_set_vf_rx_t set_vf_rx; /**< enable/disable a VF receive */
1439 eth_set_vf_tx_t set_vf_tx; /**< enable/disable a VF transmit */
1440 eth_set_vf_vlan_filter_t set_vf_vlan_filter; /**< Set VF VLAN filter */
1441 eth_set_queue_rate_limit_t set_queue_rate_limit; /**< Set queue rate limit */
1442 eth_set_vf_rate_limit_t set_vf_rate_limit; /**< Set VF rate limit */
1444 /** Add a signature filter. */
1445 fdir_add_signature_filter_t fdir_add_signature_filter;
1446 /** Update a signature filter. */
1447 fdir_update_signature_filter_t fdir_update_signature_filter;
1448 /** Remove a signature filter. */
1449 fdir_remove_signature_filter_t fdir_remove_signature_filter;
1450 /** Get information about FDIR status. */
1451 fdir_infos_get_t fdir_infos_get;
1452 /** Add a perfect filter. */
1453 fdir_add_perfect_filter_t fdir_add_perfect_filter;
1454 /** Update a perfect filter. */
1455 fdir_update_perfect_filter_t fdir_update_perfect_filter;
1456 /** Remove a perfect filter. */
1457 fdir_remove_perfect_filter_t fdir_remove_perfect_filter;
1458 /** Setup masks for FDIR filtering. */
1459 fdir_set_masks_t fdir_set_masks;
1460 /** Update redirection table. */
1461 reta_update_t reta_update;
1462 /** Query redirection table. */
1463 reta_query_t reta_query;
1464 /* bypass control */
1465 #ifdef RTE_NIC_BYPASS
1466 bypass_init_t bypass_init;
1467 bypass_state_set_t bypass_state_set;
1468 bypass_state_show_t bypass_state_show;
1469 bypass_event_set_t bypass_event_set;
1470 bypass_event_show_t bypass_event_show;
1471 bypass_wd_timeout_set_t bypass_wd_timeout_set;
1472 bypass_wd_timeout_show_t bypass_wd_timeout_show;
1473 bypass_ver_show_t bypass_ver_show;
1474 bypass_wd_reset_t bypass_wd_reset;
1477 /** Configure RSS hash protocols. */
1478 rss_hash_update_t rss_hash_update;
1479 /** Get current RSS hash configuration. */
1480 rss_hash_conf_get_t rss_hash_conf_get;
1481 eth_add_syn_filter_t add_syn_filter; /**< add syn filter. */
1482 eth_remove_syn_filter_t remove_syn_filter; /**< remove syn filter. */
1483 eth_get_syn_filter_t get_syn_filter; /**< get syn filter. */
1484 eth_add_ethertype_filter_t add_ethertype_filter; /**< add ethertype filter. */
1485 eth_remove_ethertype_filter_t remove_ethertype_filter; /**< remove ethertype filter. */
1486 eth_get_ethertype_filter_t get_ethertype_filter; /**< get ethertype filter. */
1487 eth_add_2tuple_filter_t add_2tuple_filter; /**< add 2tuple filter. */
1488 eth_remove_2tuple_filter_t remove_2tuple_filter; /**< remove 2tuple filter. */
1489 eth_get_2tuple_filter_t get_2tuple_filter; /**< get 2tuple filter. */
1490 eth_add_5tuple_filter_t add_5tuple_filter; /**< add 5tuple filter. */
1491 eth_remove_5tuple_filter_t remove_5tuple_filter; /**< remove 5tuple filter. */
1492 eth_get_5tuple_filter_t get_5tuple_filter; /**< get 5tuple filter. */
1493 eth_add_flex_filter_t add_flex_filter; /**< add flex filter. */
1494 eth_remove_flex_filter_t remove_flex_filter; /**< remove flex filter. */
1495 eth_get_flex_filter_t get_flex_filter; /**< get flex filter. */
1500 * The generic data structure associated with each ethernet device.
1502 * Pointers to burst-oriented packet receive and transmit functions are
1503 * located at the beginning of the structure, along with the pointer to
1504 * where all the data elements for the particular device are stored in shared
1505 * memory. This split allows the function pointer and driver data to be per-
1506 * process, while the actual configuration data for the device is shared.
1508 struct rte_eth_dev {
1509 eth_rx_burst_t rx_pkt_burst; /**< Pointer to PMD receive function. */
1510 eth_tx_burst_t tx_pkt_burst; /**< Pointer to PMD transmit function. */
1511 struct rte_eth_dev_data *data; /**< Pointer to device data */
1512 const struct eth_driver *driver;/**< Driver for this device */
1513 struct eth_dev_ops *dev_ops; /**< Functions exported by PMD */
1514 struct rte_pci_device *pci_dev; /**< PCI info. supplied by probing */
1515 struct rte_eth_dev_cb_list callbacks; /**< User application callbacks */
1518 struct rte_eth_dev_sriov {
1519 uint8_t active; /**< SRIOV is active with 16, 32 or 64 pools */
1520 uint8_t nb_q_per_pool; /**< rx queue number per pool */
1521 uint16_t def_vmdq_idx; /**< Default pool num used for PF */
1522 uint16_t def_pool_q_idx; /**< Default pool queue start reg index */
1524 #define RTE_ETH_DEV_SRIOV(dev) ((dev)->data->sriov)
1526 #define RTE_ETH_NAME_MAX_LEN (32)
1530 * The data part, with no function pointers, associated with each ethernet device.
1532 * This structure is safe to place in shared memory to be common among different
1533 * processes in a multi-process configuration.
1535 struct rte_eth_dev_data {
1536 char name[RTE_ETH_NAME_MAX_LEN]; /**< Unique identifier name */
1538 void **rx_queues; /**< Array of pointers to RX queues. */
1539 void **tx_queues; /**< Array of pointers to TX queues. */
1540 uint16_t nb_rx_queues; /**< Number of RX queues. */
1541 uint16_t nb_tx_queues; /**< Number of TX queues. */
1543 struct rte_eth_dev_sriov sriov; /**< SRIOV data */
1545 void *dev_private; /**< PMD-specific private data */
1547 struct rte_eth_link dev_link;
1548 /**< Link-level information & status */
1550 struct rte_eth_conf dev_conf; /**< Configuration applied to device. */
1551 uint16_t mtu; /**< Maximum Transmission Unit. */
1553 uint32_t min_rx_buf_size;
1554 /**< Common rx buffer size handled by all queues */
1556 uint64_t rx_mbuf_alloc_failed; /**< RX ring mbuf allocation failures. */
1557 struct ether_addr* mac_addrs;/**< Device Ethernet Link address. */
1558 uint64_t mac_pool_sel[ETH_NUM_RECEIVE_MAC_ADDR];
1559 /** bitmap array of associating Ethernet MAC addresses to pools */
1560 struct ether_addr* hash_mac_addrs;
1561 /** Device Ethernet MAC addresses of hash filtering. */
1562 uint8_t port_id; /**< Device [external] port identifier. */
1563 uint8_t promiscuous : 1, /**< RX promiscuous mode ON(1) / OFF(0). */
1564 scattered_rx : 1, /**< RX of scattered packets is ON(1) / OFF(0) */
1565 all_multicast : 1, /**< RX all multicast mode ON(1) / OFF(0). */
1566 dev_started : 1; /**< Device state: STARTED(1) / STOPPED(0). */
1571 * The pool of *rte_eth_dev* structures. The size of the pool
1572 * is configured at compile-time in the <rte_ethdev.c> file.
1574 extern struct rte_eth_dev rte_eth_devices[];
1577 * Get the total number of Ethernet devices that have been successfully
1578 * initialized by the [matching] Ethernet driver during the PCI probing phase.
1579 * All devices whose port identifier is in the range
1580 * [0, rte_eth_dev_count() - 1] can be operated on by network applications.
1583 * - The total number of usable Ethernet devices.
1585 extern uint8_t rte_eth_dev_count(void);
1588 * Function for internal use by dummy drivers primarily, e.g. ring-based
1590 * Allocates a new ethdev slot for an ethernet device and returns the pointer
1591 * to that slot for the driver to use.
1593 * @param name Unique identifier name for each Ethernet device
1595 * - Slot in the rte_dev_devices array for a new device;
1597 struct rte_eth_dev *rte_eth_dev_allocate(const char *name);
1602 * Initialization function of an Ethernet driver invoked for each matching
1603 * Ethernet PCI device detected during the PCI probing phase.
1606 * The pointer to the [matching] Ethernet driver structure supplied by
1607 * the PMD when it registered itself.
1609 * The *eth_dev* pointer is the address of the *rte_eth_dev* structure
1610 * associated with the matching device and which have been [automatically]
1611 * allocated in the *rte_eth_devices* array.
1612 * The *eth_dev* structure is supplied to the driver initialization function
1613 * with the following fields already initialized:
1615 * - *pci_dev*: Holds the pointers to the *rte_pci_device* structure which
1616 * contains the generic PCI information of the matching device.
1618 * - *dev_private*: Holds a pointer to the device private data structure.
1620 * - *max_frame_size*: Contains the default Ethernet maximum frame length
1623 * - *port_id*: Contains the port index of the device (actually the index
1624 * of the *eth_dev* structure in the *rte_eth_devices* array).
1627 * - 0: Success, the device is properly initialized by the driver.
1628 * In particular, the driver MUST have set up the *dev_ops* pointer
1629 * of the *eth_dev* structure.
1630 * - <0: Error code of the device initialization failure.
1632 typedef int (*eth_dev_init_t)(struct eth_driver *eth_drv,
1633 struct rte_eth_dev *eth_dev);
1637 * The structure associated with a PMD Ethernet driver.
1639 * Each Ethernet driver acts as a PCI driver and is represented by a generic
1640 * *eth_driver* structure that holds:
1642 * - An *rte_pci_driver* structure (which must be the first field).
1644 * - The *eth_dev_init* function invoked for each matching PCI device.
1646 * - The size of the private data to allocate for each matching device.
1649 struct rte_pci_driver pci_drv; /**< The PMD is also a PCI driver. */
1650 eth_dev_init_t eth_dev_init; /**< Device init function. */
1651 unsigned int dev_private_size; /**< Size of device private data. */
1656 * A function invoked by the initialization function of an Ethernet driver
1657 * to simultaneously register itself as a PCI driver and as an Ethernet
1658 * Poll Mode Driver (PMD).
1661 * The pointer to the *eth_driver* structure associated with
1662 * the Ethernet driver.
1664 extern void rte_eth_driver_register(struct eth_driver *eth_drv);
1667 * Configure an Ethernet device.
1668 * This function must be invoked first before any other function in the
1669 * Ethernet API. This function can also be re-invoked when a device is in the
1673 * The port identifier of the Ethernet device to configure.
1674 * @param nb_rx_queue
1675 * The number of receive queues to set up for the Ethernet device.
1676 * @param nb_tx_queue
1677 * The number of transmit queues to set up for the Ethernet device.
1679 * The pointer to the configuration data to be used for the Ethernet device.
1680 * The *rte_eth_conf* structure includes:
1681 * - the hardware offload features to activate, with dedicated fields for
1682 * each statically configurable offload hardware feature provided by
1683 * Ethernet devices, such as IP checksum or VLAN tag stripping for
1685 * - the Receive Side Scaling (RSS) configuration when using multiple RX
1688 * Embedding all configuration information in a single data structure
1689 * is the more flexible method that allows the addition of new features
1690 * without changing the syntax of the API.
1692 * - 0: Success, device configured.
1693 * - <0: Error code returned by the driver configuration function.
1695 extern int rte_eth_dev_configure(uint8_t port_id,
1696 uint16_t nb_rx_queue,
1697 uint16_t nb_tx_queue,
1698 const struct rte_eth_conf *eth_conf);
1701 * Allocate and set up a receive queue for an Ethernet device.
1703 * The function allocates a contiguous block of memory for *nb_rx_desc*
1704 * receive descriptors from a memory zone associated with *socket_id*
1705 * and initializes each receive descriptor with a network buffer allocated
1706 * from the memory pool *mb_pool*.
1709 * The port identifier of the Ethernet device.
1710 * @param rx_queue_id
1711 * The index of the receive queue to set up.
1712 * The value must be in the range [0, nb_rx_queue - 1] previously supplied
1713 * to rte_eth_dev_configure().
1715 * The number of receive descriptors to allocate for the receive ring.
1717 * The *socket_id* argument is the socket identifier in case of NUMA.
1718 * The value can be *SOCKET_ID_ANY* if there is no NUMA constraint for
1719 * the DMA memory allocated for the receive descriptors of the ring.
1721 * The pointer to the configuration data to be used for the receive queue.
1722 * NULL value is allowed, in which case default RX configuration
1724 * The *rx_conf* structure contains an *rx_thresh* structure with the values
1725 * of the Prefetch, Host, and Write-Back threshold registers of the receive
1728 * The pointer to the memory pool from which to allocate *rte_mbuf* network
1729 * memory buffers to populate each descriptor of the receive ring.
1731 * - 0: Success, receive queue correctly set up.
1732 * - -EINVAL: The size of network buffers which can be allocated from the
1733 * memory pool does not fit the various buffer sizes allowed by the
1734 * device controller.
1735 * - -ENOMEM: Unable to allocate the receive ring descriptors or to
1736 * allocate network memory buffers from the memory pool when
1737 * initializing receive descriptors.
1739 extern int rte_eth_rx_queue_setup(uint8_t port_id, uint16_t rx_queue_id,
1740 uint16_t nb_rx_desc, unsigned int socket_id,
1741 const struct rte_eth_rxconf *rx_conf,
1742 struct rte_mempool *mb_pool);
1745 * Allocate and set up a transmit queue for an Ethernet device.
1748 * The port identifier of the Ethernet device.
1749 * @param tx_queue_id
1750 * The index of the transmit queue to set up.
1751 * The value must be in the range [0, nb_tx_queue - 1] previously supplied
1752 * to rte_eth_dev_configure().
1754 * The number of transmit descriptors to allocate for the transmit ring.
1756 * The *socket_id* argument is the socket identifier in case of NUMA.
1757 * Its value can be *SOCKET_ID_ANY* if there is no NUMA constraint for
1758 * the DMA memory allocated for the transmit descriptors of the ring.
1760 * The pointer to the configuration data to be used for the transmit queue.
1761 * NULL value is allowed, in which case default RX configuration
1763 * The *tx_conf* structure contains the following data:
1764 * - The *tx_thresh* structure with the values of the Prefetch, Host, and
1765 * Write-Back threshold registers of the transmit ring.
1766 * When setting Write-Back threshold to the value greater then zero,
1767 * *tx_rs_thresh* value should be explicitly set to one.
1768 * - The *tx_free_thresh* value indicates the [minimum] number of network
1769 * buffers that must be pending in the transmit ring to trigger their
1770 * [implicit] freeing by the driver transmit function.
1771 * - The *tx_rs_thresh* value indicates the [minimum] number of transmit
1772 * descriptors that must be pending in the transmit ring before setting the
1773 * RS bit on a descriptor by the driver transmit function.
1774 * The *tx_rs_thresh* value should be less or equal then
1775 * *tx_free_thresh* value, and both of them should be less then
1777 * - The *txq_flags* member contains flags to pass to the TX queue setup
1778 * function to configure the behavior of the TX queue. This should be set
1779 * to 0 if no special configuration is required.
1781 * Note that setting *tx_free_thresh* or *tx_rs_thresh* value to 0 forces
1782 * the transmit function to use default values.
1784 * - 0: Success, the transmit queue is correctly set up.
1785 * - -ENOMEM: Unable to allocate the transmit ring descriptors.
1787 extern int rte_eth_tx_queue_setup(uint8_t port_id, uint16_t tx_queue_id,
1788 uint16_t nb_tx_desc, unsigned int socket_id,
1789 const struct rte_eth_txconf *tx_conf);
1792 * Return the NUMA socket to which an Ethernet device is connected
1795 * The port identifier of the Ethernet device
1797 * The NUMA socket id to which the Ethernet device is connected or
1798 * a default of zero if the socket could not be determined.
1799 * -1 is returned is the port_id value is out of range.
1801 extern int rte_eth_dev_socket_id(uint8_t port_id);
1804 * Allocate mbuf from mempool, setup the DMA physical address
1805 * and then start RX for specified queue of a port. It is used
1806 * when rx_deferred_start flag of the specified queue is true.
1809 * The port identifier of the Ethernet device
1810 * @param rx_queue_id
1811 * The index of the rx queue to update the ring.
1812 * The value must be in the range [0, nb_rx_queue - 1] previously supplied
1813 * to rte_eth_dev_configure().
1815 * - 0: Success, the transmit queue is correctly set up.
1816 * - -EINVAL: The port_id or the queue_id out of range.
1817 * - -ENOTSUP: The function not supported in PMD driver.
1819 extern int rte_eth_dev_rx_queue_start(uint8_t port_id, uint16_t rx_queue_id);
1822 * Stop specified RX queue of a port
1825 * The port identifier of the Ethernet device
1826 * @param rx_queue_id
1827 * The index of the rx queue to update the ring.
1828 * The value must be in the range [0, nb_rx_queue - 1] previously supplied
1829 * to rte_eth_dev_configure().
1831 * - 0: Success, the transmit queue is correctly set up.
1832 * - -EINVAL: The port_id or the queue_id out of range.
1833 * - -ENOTSUP: The function not supported in PMD driver.
1835 extern int rte_eth_dev_rx_queue_stop(uint8_t port_id, uint16_t rx_queue_id);
1838 * Start TX for specified queue of a port. It is used when tx_deferred_start
1839 * flag of the specified queue is true.
1842 * The port identifier of the Ethernet device
1843 * @param tx_queue_id
1844 * The index of the tx queue to update the ring.
1845 * The value must be in the range [0, nb_tx_queue - 1] previously supplied
1846 * to rte_eth_dev_configure().
1848 * - 0: Success, the transmit queue is correctly set up.
1849 * - -EINVAL: The port_id or the queue_id out of range.
1850 * - -ENOTSUP: The function not supported in PMD driver.
1852 extern int rte_eth_dev_tx_queue_start(uint8_t port_id, uint16_t tx_queue_id);
1855 * Stop specified TX queue of a port
1858 * The port identifier of the Ethernet device
1859 * @param tx_queue_id
1860 * The index of the tx queue to update the ring.
1861 * The value must be in the range [0, nb_tx_queue - 1] previously supplied
1862 * to rte_eth_dev_configure().
1864 * - 0: Success, the transmit queue is correctly set up.
1865 * - -EINVAL: The port_id or the queue_id out of range.
1866 * - -ENOTSUP: The function not supported in PMD driver.
1868 extern int rte_eth_dev_tx_queue_stop(uint8_t port_id, uint16_t tx_queue_id);
1873 * Start an Ethernet device.
1875 * The device start step is the last one and consists of setting the configured
1876 * offload features and in starting the transmit and the receive units of the
1878 * On success, all basic functions exported by the Ethernet API (link status,
1879 * receive/transmit, and so on) can be invoked.
1882 * The port identifier of the Ethernet device.
1884 * - 0: Success, Ethernet device started.
1885 * - <0: Error code of the driver device start function.
1887 extern int rte_eth_dev_start(uint8_t port_id);
1890 * Stop an Ethernet device. The device can be restarted with a call to
1891 * rte_eth_dev_start()
1894 * The port identifier of the Ethernet device.
1896 extern void rte_eth_dev_stop(uint8_t port_id);
1900 * Link up an Ethernet device.
1902 * Set device link up will re-enable the device rx/tx
1903 * functionality after it is previously set device linked down.
1906 * The port identifier of the Ethernet device.
1908 * - 0: Success, Ethernet device linked up.
1909 * - <0: Error code of the driver device link up function.
1911 extern int rte_eth_dev_set_link_up(uint8_t port_id);
1914 * Link down an Ethernet device.
1915 * The device rx/tx functionality will be disabled if success,
1916 * and it can be re-enabled with a call to
1917 * rte_eth_dev_set_link_up()
1920 * The port identifier of the Ethernet device.
1922 extern int rte_eth_dev_set_link_down(uint8_t port_id);
1925 * Close an Ethernet device. The device cannot be restarted!
1928 * The port identifier of the Ethernet device.
1930 extern void rte_eth_dev_close(uint8_t port_id);
1933 * Enable receipt in promiscuous mode for an Ethernet device.
1936 * The port identifier of the Ethernet device.
1938 extern void rte_eth_promiscuous_enable(uint8_t port_id);
1941 * Disable receipt in promiscuous mode for an Ethernet device.
1944 * The port identifier of the Ethernet device.
1946 extern void rte_eth_promiscuous_disable(uint8_t port_id);
1949 * Return the value of promiscuous mode for an Ethernet device.
1952 * The port identifier of the Ethernet device.
1954 * - (1) if promiscuous is enabled
1955 * - (0) if promiscuous is disabled.
1958 extern int rte_eth_promiscuous_get(uint8_t port_id);
1961 * Enable the receipt of any multicast frame by an Ethernet device.
1964 * The port identifier of the Ethernet device.
1966 extern void rte_eth_allmulticast_enable(uint8_t port_id);
1969 * Disable the receipt of all multicast frames by an Ethernet device.
1972 * The port identifier of the Ethernet device.
1974 extern void rte_eth_allmulticast_disable(uint8_t port_id);
1977 * Return the value of allmulticast mode for an Ethernet device.
1980 * The port identifier of the Ethernet device.
1982 * - (1) if allmulticast is enabled
1983 * - (0) if allmulticast is disabled.
1986 extern int rte_eth_allmulticast_get(uint8_t port_id);
1989 * Retrieve the status (ON/OFF), the speed (in Mbps) and the mode (HALF-DUPLEX
1990 * or FULL-DUPLEX) of the physical link of an Ethernet device. It might need
1991 * to wait up to 9 seconds in it.
1994 * The port identifier of the Ethernet device.
1996 * A pointer to an *rte_eth_link* structure to be filled with
1997 * the status, the speed and the mode of the Ethernet device link.
1999 extern void rte_eth_link_get(uint8_t port_id, struct rte_eth_link *link);
2002 * Retrieve the status (ON/OFF), the speed (in Mbps) and the mode (HALF-DUPLEX
2003 * or FULL-DUPLEX) of the physical link of an Ethernet device. It is a no-wait
2004 * version of rte_eth_link_get().
2007 * The port identifier of the Ethernet device.
2009 * A pointer to an *rte_eth_link* structure to be filled with
2010 * the status, the speed and the mode of the Ethernet device link.
2012 extern void rte_eth_link_get_nowait(uint8_t port_id,
2013 struct rte_eth_link *link);
2016 * Retrieve the general I/O statistics of an Ethernet device.
2019 * The port identifier of the Ethernet device.
2021 * A pointer to a structure of type *rte_eth_stats* to be filled with
2022 * the values of device counters for the following set of statistics:
2023 * - *ipackets* with the total of successfully received packets.
2024 * - *opackets* with the total of successfully transmitted packets.
2025 * - *ibytes* with the total of successfully received bytes.
2026 * - *obytes* with the total of successfully transmitted bytes.
2027 * - *ierrors* with the total of erroneous received packets.
2028 * - *oerrors* with the total of failed transmitted packets.
2030 extern void rte_eth_stats_get(uint8_t port_id, struct rte_eth_stats *stats);
2033 * Reset the general I/O statistics of an Ethernet device.
2036 * The port identifier of the Ethernet device.
2038 extern void rte_eth_stats_reset(uint8_t port_id);
2041 * Retrieve extended statistics of an Ethernet device.
2044 * The port identifier of the Ethernet device.
2046 * A pointer to a table of structure of type *rte_eth_xstats*
2047 * to be filled with device statistics names and values.
2048 * This parameter can be set to NULL if n is 0.
2050 * The size of the stats table, which should be large enough to store
2051 * all the statistics of the device.
2053 * - positive value lower or equal to n: success. The return value
2054 * is the number of entries filled in the stats table.
2055 * - positive value higher than n: error, the given statistics table
2056 * is too small. The return value corresponds to the size that should
2057 * be given to succeed. The entries in the table are not valid and
2058 * shall not be used by the caller.
2059 * - negative value on error (invalid port id)
2061 extern int rte_eth_xstats_get(uint8_t port_id,
2062 struct rte_eth_xstats *xstats, unsigned n);
2065 * Reset extended statistics of an Ethernet device.
2068 * The port identifier of the Ethernet device.
2070 extern void rte_eth_xstats_reset(uint8_t port_id);
2073 * Set a mapping for the specified transmit queue to the specified per-queue
2074 * statistics counter.
2077 * The port identifier of the Ethernet device.
2078 * @param tx_queue_id
2079 * The index of the transmit queue for which a queue stats mapping is required.
2080 * The value must be in the range [0, nb_tx_queue - 1] previously supplied
2081 * to rte_eth_dev_configure().
2083 * The per-queue packet statistics functionality number that the transmit
2084 * queue is to be assigned.
2085 * The value must be in the range [0, RTE_MAX_ETHPORT_QUEUE_STATS_MAPS - 1].
2087 * Zero if successful. Non-zero otherwise.
2089 extern int rte_eth_dev_set_tx_queue_stats_mapping(uint8_t port_id,
2090 uint16_t tx_queue_id,
2094 * Set a mapping for the specified receive queue to the specified per-queue
2095 * statistics counter.
2098 * The port identifier of the Ethernet device.
2099 * @param rx_queue_id
2100 * The index of the receive queue for which a queue stats mapping is required.
2101 * The value must be in the range [0, nb_rx_queue - 1] previously supplied
2102 * to rte_eth_dev_configure().
2104 * The per-queue packet statistics functionality number that the receive
2105 * queue is to be assigned.
2106 * The value must be in the range [0, RTE_MAX_ETHPORT_QUEUE_STATS_MAPS - 1].
2108 * Zero if successful. Non-zero otherwise.
2110 extern int rte_eth_dev_set_rx_queue_stats_mapping(uint8_t port_id,
2111 uint16_t rx_queue_id,
2115 * Retrieve the Ethernet address of an Ethernet device.
2118 * The port identifier of the Ethernet device.
2120 * A pointer to a structure of type *ether_addr* to be filled with
2121 * the Ethernet address of the Ethernet device.
2123 extern void rte_eth_macaddr_get(uint8_t port_id, struct ether_addr *mac_addr);
2126 * Retrieve the contextual information of an Ethernet device.
2129 * The port identifier of the Ethernet device.
2131 * A pointer to a structure of type *rte_eth_dev_info* to be filled with
2132 * the contextual information of the Ethernet device.
2134 extern void rte_eth_dev_info_get(uint8_t port_id,
2135 struct rte_eth_dev_info *dev_info);
2138 * Retrieve the MTU of an Ethernet device.
2141 * The port identifier of the Ethernet device.
2143 * A pointer to a uint16_t where the retrieved MTU is to be stored.
2145 * - (0) if successful.
2146 * - (-ENODEV) if *port_id* invalid.
2148 extern int rte_eth_dev_get_mtu(uint8_t port_id, uint16_t *mtu);
2151 * Change the MTU of an Ethernet device.
2154 * The port identifier of the Ethernet device.
2156 * A uint16_t for the MTU to be applied.
2158 * - (0) if successful.
2159 * - (-ENOTSUP) if operation is not supported.
2160 * - (-ENODEV) if *port_id* invalid.
2161 * - (-EINVAL) if *mtu* invalid.
2163 extern int rte_eth_dev_set_mtu(uint8_t port_id, uint16_t mtu);
2166 * Enable/Disable hardware filtering by an Ethernet device of received
2167 * VLAN packets tagged with a given VLAN Tag Identifier.
2170 * The port identifier of the Ethernet device.
2172 * The VLAN Tag Identifier whose filtering must be enabled or disabled.
2174 * If > 0, enable VLAN filtering of VLAN packets tagged with *vlan_id*.
2175 * Otherwise, disable VLAN filtering of VLAN packets tagged with *vlan_id*.
2177 * - (0) if successful.
2178 * - (-ENOSUP) if hardware-assisted VLAN filtering not configured.
2179 * - (-ENODEV) if *port_id* invalid.
2180 * - (-ENOSYS) if VLAN filtering on *port_id* disabled.
2181 * - (-EINVAL) if *vlan_id* > 4095.
2183 extern int rte_eth_dev_vlan_filter(uint8_t port_id, uint16_t vlan_id , int on);
2186 * Enable/Disable hardware VLAN Strip by a rx queue of an Ethernet device.
2187 * 82599/X540/X550 can support VLAN stripping at the rx queue level
2190 * The port identifier of the Ethernet device.
2191 * @param rx_queue_id
2192 * The index of the receive queue for which a queue stats mapping is required.
2193 * The value must be in the range [0, nb_rx_queue - 1] previously supplied
2194 * to rte_eth_dev_configure().
2196 * If 1, Enable VLAN Stripping of the receive queue of the Ethernet port.
2197 * If 0, Disable VLAN Stripping of the receive queue of the Ethernet port.
2199 * - (0) if successful.
2200 * - (-ENOSUP) if hardware-assisted VLAN stripping not configured.
2201 * - (-ENODEV) if *port_id* invalid.
2202 * - (-EINVAL) if *rx_queue_id* invalid.
2204 extern int rte_eth_dev_set_vlan_strip_on_queue(uint8_t port_id,
2205 uint16_t rx_queue_id, int on);
2208 * Set the Outer VLAN Ether Type by an Ethernet device, it can be inserted to
2209 * the VLAN Header. This is a register setup available on some Intel NIC, not
2210 * but all, please check the data sheet for availability.
2213 * The port identifier of the Ethernet device.
2215 * The Tag Protocol ID
2217 * - (0) if successful.
2218 * - (-ENOSUP) if hardware-assisted VLAN TPID setup is not supported.
2219 * - (-ENODEV) if *port_id* invalid.
2221 extern int rte_eth_dev_set_vlan_ether_type(uint8_t port_id, uint16_t tag_type);
2224 * Set VLAN offload configuration on an Ethernet device
2225 * Enable/Disable Extended VLAN by an Ethernet device, This is a register setup
2226 * available on some Intel NIC, not but all, please check the data sheet for
2228 * Enable/Disable VLAN Strip can be done on rx queue for certain NIC, but here
2229 * the configuration is applied on the port level.
2232 * The port identifier of the Ethernet device.
2233 * @param offload_mask
2234 * The VLAN Offload bit mask can be mixed use with "OR"
2235 * ETH_VLAN_STRIP_OFFLOAD
2236 * ETH_VLAN_FILTER_OFFLOAD
2237 * ETH_VLAN_EXTEND_OFFLOAD
2239 * - (0) if successful.
2240 * - (-ENOSUP) if hardware-assisted VLAN filtering not configured.
2241 * - (-ENODEV) if *port_id* invalid.
2243 extern int rte_eth_dev_set_vlan_offload(uint8_t port_id, int offload_mask);
2246 * Read VLAN Offload configuration from an Ethernet device
2249 * The port identifier of the Ethernet device.
2251 * - (>0) if successful. Bit mask to indicate
2252 * ETH_VLAN_STRIP_OFFLOAD
2253 * ETH_VLAN_FILTER_OFFLOAD
2254 * ETH_VLAN_EXTEND_OFFLOAD
2255 * - (-ENODEV) if *port_id* invalid.
2257 extern int rte_eth_dev_get_vlan_offload(uint8_t port_id);
2260 * Set port based TX VLAN insersion on or off.
2263 * The port identifier of the Ethernet device.
2265 * Port based TX VLAN identifier togeth with user priority.
2267 * Turn on or off the port based TX VLAN insertion.
2270 * - (0) if successful.
2271 * - negative if failed.
2273 extern int rte_eth_dev_set_vlan_pvid(uint8_t port_id, uint16_t pvid, int on);
2277 * Retrieve a burst of input packets from a receive queue of an Ethernet
2278 * device. The retrieved packets are stored in *rte_mbuf* structures whose
2279 * pointers are supplied in the *rx_pkts* array.
2281 * The rte_eth_rx_burst() function loops, parsing the RX ring of the
2282 * receive queue, up to *nb_pkts* packets, and for each completed RX
2283 * descriptor in the ring, it performs the following operations:
2285 * - Initialize the *rte_mbuf* data structure associated with the
2286 * RX descriptor according to the information provided by the NIC into
2287 * that RX descriptor.
2289 * - Store the *rte_mbuf* data structure into the next entry of the
2292 * - Replenish the RX descriptor with a new *rte_mbuf* buffer
2293 * allocated from the memory pool associated with the receive queue at
2294 * initialization time.
2296 * When retrieving an input packet that was scattered by the controller
2297 * into multiple receive descriptors, the rte_eth_rx_burst() function
2298 * appends the associated *rte_mbuf* buffers to the first buffer of the
2301 * The rte_eth_rx_burst() function returns the number of packets
2302 * actually retrieved, which is the number of *rte_mbuf* data structures
2303 * effectively supplied into the *rx_pkts* array.
2304 * A return value equal to *nb_pkts* indicates that the RX queue contained
2305 * at least *rx_pkts* packets, and this is likely to signify that other
2306 * received packets remain in the input queue. Applications implementing
2307 * a "retrieve as much received packets as possible" policy can check this
2308 * specific case and keep invoking the rte_eth_rx_burst() function until
2309 * a value less than *nb_pkts* is returned.
2311 * This receive method has the following advantages:
2313 * - It allows a run-to-completion network stack engine to retrieve and
2314 * to immediately process received packets in a fast burst-oriented
2315 * approach, avoiding the overhead of unnecessary intermediate packet
2316 * queue/dequeue operations.
2318 * - Conversely, it also allows an asynchronous-oriented processing
2319 * method to retrieve bursts of received packets and to immediately
2320 * queue them for further parallel processing by another logical core,
2321 * for instance. However, instead of having received packets being
2322 * individually queued by the driver, this approach allows the invoker
2323 * of the rte_eth_rx_burst() function to queue a burst of retrieved
2324 * packets at a time and therefore dramatically reduce the cost of
2325 * enqueue/dequeue operations per packet.
2327 * - It allows the rte_eth_rx_burst() function of the driver to take
2328 * advantage of burst-oriented hardware features (CPU cache,
2329 * prefetch instructions, and so on) to minimize the number of CPU
2330 * cycles per packet.
2332 * To summarize, the proposed receive API enables many
2333 * burst-oriented optimizations in both synchronous and asynchronous
2334 * packet processing environments with no overhead in both cases.
2336 * The rte_eth_rx_burst() function does not provide any error
2337 * notification to avoid the corresponding overhead. As a hint, the
2338 * upper-level application might check the status of the device link once
2339 * being systematically returned a 0 value for a given number of tries.
2342 * The port identifier of the Ethernet device.
2344 * The index of the receive queue from which to retrieve input packets.
2345 * The value must be in the range [0, nb_rx_queue - 1] previously supplied
2346 * to rte_eth_dev_configure().
2348 * The address of an array of pointers to *rte_mbuf* structures that
2349 * must be large enough to store *nb_pkts* pointers in it.
2351 * The maximum number of packets to retrieve.
2353 * The number of packets actually retrieved, which is the number
2354 * of pointers to *rte_mbuf* structures effectively supplied to the
2357 #ifdef RTE_LIBRTE_ETHDEV_DEBUG
2358 extern uint16_t rte_eth_rx_burst(uint8_t port_id, uint16_t queue_id,
2359 struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
2361 static inline uint16_t
2362 rte_eth_rx_burst(uint8_t port_id, uint16_t queue_id,
2363 struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
2365 struct rte_eth_dev *dev;
2367 dev = &rte_eth_devices[port_id];
2368 return (*dev->rx_pkt_burst)(dev->data->rx_queues[queue_id], rx_pkts, nb_pkts);
2373 * Get the number of used descriptors in a specific queue
2376 * The port identifier of the Ethernet device.
2378 * The queue id on the specific port.
2380 * The number of used descriptors in the specific queue.
2382 #ifdef RTE_LIBRTE_ETHDEV_DEBUG
2383 extern uint32_t rte_eth_rx_queue_count(uint8_t port_id, uint16_t queue_id);
2385 static inline uint32_t
2386 rte_eth_rx_queue_count(uint8_t port_id, uint16_t queue_id)
2388 struct rte_eth_dev *dev;
2390 dev = &rte_eth_devices[port_id];
2391 return (*dev->dev_ops->rx_queue_count)(dev, queue_id);
2396 * Check if the DD bit of the specific RX descriptor in the queue has been set
2399 * The port identifier of the Ethernet device.
2401 * The queue id on the specific port.
2403 * The offset of the descriptor ID from tail.
2405 * - (1) if the specific DD bit is set.
2406 * - (0) if the specific DD bit is not set.
2407 * - (-ENODEV) if *port_id* invalid.
2409 #ifdef RTE_LIBRTE_ETHDEV_DEBUG
2410 extern int rte_eth_rx_descriptor_done(uint8_t port_id,
2415 rte_eth_rx_descriptor_done(uint8_t port_id, uint16_t queue_id, uint16_t offset)
2417 struct rte_eth_dev *dev;
2419 dev = &rte_eth_devices[port_id];
2420 return (*dev->dev_ops->rx_descriptor_done)( \
2421 dev->data->rx_queues[queue_id], offset);
2426 * Send a burst of output packets on a transmit queue of an Ethernet device.
2428 * The rte_eth_tx_burst() function is invoked to transmit output packets
2429 * on the output queue *queue_id* of the Ethernet device designated by its
2431 * The *nb_pkts* parameter is the number of packets to send which are
2432 * supplied in the *tx_pkts* array of *rte_mbuf* structures.
2433 * The rte_eth_tx_burst() function loops, sending *nb_pkts* packets,
2434 * up to the number of transmit descriptors available in the TX ring of the
2436 * For each packet to send, the rte_eth_tx_burst() function performs
2437 * the following operations:
2439 * - Pick up the next available descriptor in the transmit ring.
2441 * - Free the network buffer previously sent with that descriptor, if any.
2443 * - Initialize the transmit descriptor with the information provided
2444 * in the *rte_mbuf data structure.
2446 * In the case of a segmented packet composed of a list of *rte_mbuf* buffers,
2447 * the rte_eth_tx_burst() function uses several transmit descriptors
2450 * The rte_eth_tx_burst() function returns the number of packets it
2451 * actually sent. A return value equal to *nb_pkts* means that all packets
2452 * have been sent, and this is likely to signify that other output packets
2453 * could be immediately transmitted again. Applications that implement a
2454 * "send as many packets to transmit as possible" policy can check this
2455 * specific case and keep invoking the rte_eth_tx_burst() function until
2456 * a value less than *nb_pkts* is returned.
2458 * It is the responsibility of the rte_eth_tx_burst() function to
2459 * transparently free the memory buffers of packets previously sent.
2460 * This feature is driven by the *tx_free_thresh* value supplied to the
2461 * rte_eth_dev_configure() function at device configuration time.
2462 * When the number of previously sent packets reached the "minimum transmit
2463 * packets to free" threshold, the rte_eth_tx_burst() function must
2464 * [attempt to] free the *rte_mbuf* buffers of those packets whose
2465 * transmission was effectively completed.
2468 * The port identifier of the Ethernet device.
2470 * The index of the transmit queue through which output packets must be
2472 * The value must be in the range [0, nb_tx_queue - 1] previously supplied
2473 * to rte_eth_dev_configure().
2475 * The address of an array of *nb_pkts* pointers to *rte_mbuf* structures
2476 * which contain the output packets.
2478 * The maximum number of packets to transmit.
2480 * The number of output packets actually stored in transmit descriptors of
2481 * the transmit ring. The return value can be less than the value of the
2482 * *tx_pkts* parameter when the transmit ring is full or has been filled up.
2484 #ifdef RTE_LIBRTE_ETHDEV_DEBUG
2485 extern uint16_t rte_eth_tx_burst(uint8_t port_id, uint16_t queue_id,
2486 struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
2488 static inline uint16_t
2489 rte_eth_tx_burst(uint8_t port_id, uint16_t queue_id,
2490 struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
2492 struct rte_eth_dev *dev;
2494 dev = &rte_eth_devices[port_id];
2495 return (*dev->tx_pkt_burst)(dev->data->tx_queues[queue_id], tx_pkts, nb_pkts);
2500 * Setup a new signature filter rule on an Ethernet device
2503 * The port identifier of the Ethernet device.
2504 * @param fdir_filter
2505 * The pointer to the fdir filter structure describing the signature filter
2507 * The *rte_fdir_filter* structure includes the values of the different fields
2508 * to match: source and destination IP addresses, vlan id, flexbytes, source
2509 * and destination ports, and so on.
2511 * The index of the RX queue where to store RX packets matching the added
2512 * signature filter defined in fdir_filter.
2514 * - (0) if successful.
2515 * - (-ENOTSUP) if hardware doesn't support flow director mode.
2516 * - (-ENODEV) if *port_id* invalid.
2517 * - (-ENOSYS) if the FDIR mode is not configured in signature mode
2519 * - (-EINVAL) if the fdir_filter information is not correct.
2521 int rte_eth_dev_fdir_add_signature_filter(uint8_t port_id,
2522 struct rte_fdir_filter *fdir_filter,
2526 * Update a signature filter rule on an Ethernet device.
2527 * If the rule doesn't exits, it is created.
2530 * The port identifier of the Ethernet device.
2532 * The pointer to the structure describing the signature filter rule.
2533 * The *rte_fdir_filter* structure includes the values of the different fields
2534 * to match: source and destination IP addresses, vlan id, flexbytes, source
2535 * and destination ports, and so on.
2537 * The index of the RX queue where to store RX packets matching the added
2538 * signature filter defined in fdir_ftr.
2540 * - (0) if successful.
2541 * - (-ENOTSUP) if hardware doesn't support flow director mode.
2542 * - (-ENODEV) if *port_id* invalid.
2543 * - (-ENOSYS) if the flow director mode is not configured in signature mode
2545 * - (-EINVAL) if the fdir_filter information is not correct.
2547 int rte_eth_dev_fdir_update_signature_filter(uint8_t port_id,
2548 struct rte_fdir_filter *fdir_ftr,
2552 * Remove a signature filter rule on an Ethernet device.
2555 * The port identifier of the Ethernet device.
2557 * The pointer to the structure describing the signature filter rule.
2558 * The *rte_fdir_filter* structure includes the values of the different fields
2559 * to match: source and destination IP addresses, vlan id, flexbytes, source
2560 * and destination ports, and so on.
2562 * - (0) if successful.
2563 * - (-ENOTSUP) if hardware doesn't support flow director mode.
2564 * - (-ENODEV) if *port_id* invalid.
2565 * - (-ENOSYS) if the flow director mode is not configured in signature mode
2567 * - (-EINVAL) if the fdir_filter information is not correct.
2569 int rte_eth_dev_fdir_remove_signature_filter(uint8_t port_id,
2570 struct rte_fdir_filter *fdir_ftr);
2573 * Retrieve the flow director information of an Ethernet device.
2576 * The port identifier of the Ethernet device.
2578 * A pointer to a structure of type *rte_eth_dev_fdir* to be filled with
2579 * the flow director information of the Ethernet device.
2581 * - (0) if successful.
2582 * - (-ENOTSUP) if hardware doesn't support flow director mode.
2583 * - (-ENODEV) if *port_id* invalid.
2584 * - (-ENOSYS) if the flow director mode is not configured on *port_id*.
2586 int rte_eth_dev_fdir_get_infos(uint8_t port_id, struct rte_eth_fdir *fdir);
2589 * Add a new perfect filter rule on an Ethernet device.
2592 * The port identifier of the Ethernet device.
2593 * @param fdir_filter
2594 * The pointer to the structure describing the perfect filter rule.
2595 * The *rte_fdir_filter* structure includes the values of the different fields
2596 * to match: source and destination IP addresses, vlan id, flexbytes, source
2597 * and destination ports, and so on.
2598 * IPv6 are not supported.
2600 * The 16-bit value supplied in the field hash.fdir.id of mbuf for RX
2601 * packets matching the perfect filter.
2603 * The index of the RX queue where to store RX packets matching the added
2604 * perfect filter defined in fdir_filter.
2606 * If drop is set to 1, matching RX packets are stored into the RX drop
2607 * queue defined in the rte_fdir_conf.
2609 * - (0) if successful.
2610 * - (-ENOTSUP) if hardware doesn't support flow director mode.
2611 * - (-ENODEV) if *port_id* invalid.
2612 * - (-ENOSYS) if the flow director mode is not configured in perfect mode
2614 * - (-EINVAL) if the fdir_filter information is not correct.
2616 int rte_eth_dev_fdir_add_perfect_filter(uint8_t port_id,
2617 struct rte_fdir_filter *fdir_filter,
2618 uint16_t soft_id, uint8_t rx_queue,
2622 * Update a perfect filter rule on an Ethernet device.
2623 * If the rule doesn't exits, it is created.
2626 * The port identifier of the Ethernet device.
2627 * @param fdir_filter
2628 * The pointer to the structure describing the perfect filter rule.
2629 * The *rte_fdir_filter* structure includes the values of the different fields
2630 * to match: source and destination IP addresses, vlan id, flexbytes, source
2631 * and destination ports, and so on.
2632 * IPv6 are not supported.
2634 * The 16-bit value supplied in the field hash.fdir.id of mbuf for RX
2635 * packets matching the perfect filter.
2637 * The index of the RX queue where to store RX packets matching the added
2638 * perfect filter defined in fdir_filter.
2640 * If drop is set to 1, matching RX packets are stored into the RX drop
2641 * queue defined in the rte_fdir_conf.
2643 * - (0) if successful.
2644 * - (-ENOTSUP) if hardware doesn't support flow director mode.
2645 * - (-ENODEV) if *port_id* invalid.
2646 * - (-ENOSYS) if the flow director mode is not configured in perfect mode
2648 * - (-EINVAL) if the fdir_filter information is not correct.
2650 int rte_eth_dev_fdir_update_perfect_filter(uint8_t port_id,
2651 struct rte_fdir_filter *fdir_filter,
2652 uint16_t soft_id, uint8_t rx_queue,
2656 * Remove a perfect filter rule on an Ethernet device.
2659 * The port identifier of the Ethernet device.
2660 * @param fdir_filter
2661 * The pointer to the structure describing the perfect filter rule.
2662 * The *rte_fdir_filter* structure includes the values of the different fields
2663 * to match: source and destination IP addresses, vlan id, flexbytes, source
2664 * and destination ports, and so on.
2665 * IPv6 are not supported.
2667 * The soft_id value provided when adding/updating the removed filter.
2669 * - (0) if successful.
2670 * - (-ENOTSUP) if hardware doesn't support flow director mode.
2671 * - (-ENODEV) if *port_id* invalid.
2672 * - (-ENOSYS) if the flow director mode is not configured in perfect mode
2674 * - (-EINVAL) if the fdir_filter information is not correct.
2676 int rte_eth_dev_fdir_remove_perfect_filter(uint8_t port_id,
2677 struct rte_fdir_filter *fdir_filter,
2680 * Configure globally the masks for flow director mode for an Ethernet device.
2681 * For example, the device can match packets with only the first 24 bits of
2682 * the IPv4 source address.
2684 * The following fields can be masked: IPv4 addresses and L4 port numbers.
2685 * The following fields can be either enabled or disabled completely for the
2686 * matching functionality: VLAN ID tag; VLAN Priority + CFI bit; Flexible 2-byte
2688 * IPv6 masks are not supported.
2690 * All filters must comply with the masks previously configured.
2691 * For example, with a mask equal to 255.255.255.0 for the source IPv4 address,
2692 * all IPv4 filters must be created with a source IPv4 address that fits the
2695 * This function flushes all filters that have been previously added in
2699 * The port identifier of the Ethernet device.
2701 * The pointer to the fdir mask structure describing relevant headers fields
2702 * and relevant bits to use when matching packets addresses and ports.
2703 * IPv6 masks are not supported.
2705 * - (0) if successful.
2706 * - (-ENOTSUP) if hardware doesn't support flow director mode.
2707 * - (-ENODEV) if *port_id* invalid.
2708 * - (-ENOSYS) if the flow director mode is not configured in perfect
2709 * mode on *port_id*.
2710 * - (-EINVAL) if the fdir_filter information is not correct
2712 int rte_eth_dev_fdir_set_masks(uint8_t port_id,
2713 struct rte_fdir_masks *fdir_mask);
2716 * The eth device event type for interrupt, and maybe others in the future.
2718 enum rte_eth_event_type {
2719 RTE_ETH_EVENT_UNKNOWN, /**< unknown event type */
2720 RTE_ETH_EVENT_INTR_LSC, /**< lsc interrupt event */
2721 RTE_ETH_EVENT_MAX /**< max value of this enum */
2724 typedef void (*rte_eth_dev_cb_fn)(uint8_t port_id, \
2725 enum rte_eth_event_type event, void *cb_arg);
2726 /**< user application callback to be registered for interrupts */
2731 * Register a callback function for specific port id.
2738 * User supplied callback function to be called.
2740 * Pointer to the parameters for the registered callback.
2743 * - On success, zero.
2744 * - On failure, a negative value.
2746 int rte_eth_dev_callback_register(uint8_t port_id,
2747 enum rte_eth_event_type event,
2748 rte_eth_dev_cb_fn cb_fn, void *cb_arg);
2751 * Unregister a callback function for specific port id.
2758 * User supplied callback function to be called.
2760 * Pointer to the parameters for the registered callback. -1 means to
2761 * remove all for the same callback address and same event.
2764 * - On success, zero.
2765 * - On failure, a negative value.
2767 int rte_eth_dev_callback_unregister(uint8_t port_id,
2768 enum rte_eth_event_type event,
2769 rte_eth_dev_cb_fn cb_fn, void *cb_arg);
2772 * @internal Executes all the user application registered callbacks for
2773 * the specific device. It is for DPDK internal user only. User
2774 * application should not call it directly.
2777 * Pointer to struct rte_eth_dev.
2779 * Eth device interrupt event type.
2784 void _rte_eth_dev_callback_process(struct rte_eth_dev *dev,
2785 enum rte_eth_event_type event);
2788 * Turn on the LED on the Ethernet device.
2789 * This function turns on the LED on the Ethernet device.
2792 * The port identifier of the Ethernet device.
2794 * - (0) if successful.
2795 * - (-ENOTSUP) if underlying hardware OR driver doesn't support
2797 * - (-ENODEV) if *port_id* invalid.
2799 int rte_eth_led_on(uint8_t port_id);
2802 * Turn off the LED on the Ethernet device.
2803 * This function turns off the LED on the Ethernet device.
2806 * The port identifier of the Ethernet device.
2808 * - (0) if successful.
2809 * - (-ENOTSUP) if underlying hardware OR driver doesn't support
2811 * - (-ENODEV) if *port_id* invalid.
2813 int rte_eth_led_off(uint8_t port_id);
2816 * Get current status of the Ethernet link flow control for Ethernet device
2819 * The port identifier of the Ethernet device.
2821 * The pointer to the structure where to store the flow control parameters.
2823 * - (0) if successful.
2824 * - (-ENOTSUP) if hardware doesn't support flow control.
2825 * - (-ENODEV) if *port_id* invalid.
2827 int rte_eth_dev_flow_ctrl_get(uint8_t port_id,
2828 struct rte_eth_fc_conf *fc_conf);
2831 * Configure the Ethernet link flow control for Ethernet device
2834 * The port identifier of the Ethernet device.
2836 * The pointer to the structure of the flow control parameters.
2838 * - (0) if successful.
2839 * - (-ENOTSUP) if hardware doesn't support flow control mode.
2840 * - (-ENODEV) if *port_id* invalid.
2841 * - (-EINVAL) if bad parameter
2842 * - (-EIO) if flow control setup failure
2844 int rte_eth_dev_flow_ctrl_set(uint8_t port_id,
2845 struct rte_eth_fc_conf *fc_conf);
2848 * Configure the Ethernet priority flow control under DCB environment
2849 * for Ethernet device.
2852 * The port identifier of the Ethernet device.
2854 * The pointer to the structure of the priority flow control parameters.
2856 * - (0) if successful.
2857 * - (-ENOTSUP) if hardware doesn't support priority flow control mode.
2858 * - (-ENODEV) if *port_id* invalid.
2859 * - (-EINVAL) if bad parameter
2860 * - (-EIO) if flow control setup failure
2862 int rte_eth_dev_priority_flow_ctrl_set(uint8_t port_id,
2863 struct rte_eth_pfc_conf *pfc_conf);
2866 * Add a MAC address to an internal array of addresses used to enable whitelist
2867 * filtering to accept packets only if the destination MAC address matches.
2870 * The port identifier of the Ethernet device.
2872 * The MAC address to add.
2874 * VMDq pool index to associate address with (if VMDq is enabled). If VMDq is
2875 * not enabled, this should be set to 0.
2877 * - (0) if successfully added or *mac_addr" was already added.
2878 * - (-ENOTSUP) if hardware doesn't support this feature.
2879 * - (-ENODEV) if *port* is invalid.
2880 * - (-ENOSPC) if no more MAC addresses can be added.
2881 * - (-EINVAL) if MAC address is invalid.
2883 int rte_eth_dev_mac_addr_add(uint8_t port, struct ether_addr *mac_addr,
2887 * Remove a MAC address from the internal array of addresses.
2890 * The port identifier of the Ethernet device.
2892 * MAC address to remove.
2894 * - (0) if successful, or *mac_addr* didn't exist.
2895 * - (-ENOTSUP) if hardware doesn't support.
2896 * - (-ENODEV) if *port* invalid.
2897 * - (-EADDRINUSE) if attempting to remove the default MAC address
2899 int rte_eth_dev_mac_addr_remove(uint8_t port, struct ether_addr *mac_addr);
2902 * Update Redirection Table(RETA) of Receive Side Scaling of Ethernet device.
2905 * The port identifier of the Ethernet device.
2909 * - (0) if successful.
2910 * - (-ENOTSUP) if hardware doesn't support.
2911 * - (-EINVAL) if bad parameter.
2913 int rte_eth_dev_rss_reta_update(uint8_t port,
2914 struct rte_eth_rss_reta *reta_conf);
2917 * Query Redirection Table(RETA) of Receive Side Scaling of Ethernet device.
2920 * The port identifier of the Ethernet device.
2924 * - (0) if successful.
2925 * - (-ENOTSUP) if hardware doesn't support.
2926 * - (-EINVAL) if bad parameter.
2928 int rte_eth_dev_rss_reta_query(uint8_t port,
2929 struct rte_eth_rss_reta *reta_conf);
2932 * Updates unicast hash table for receiving packet with the given destination
2933 * MAC address, and the packet is routed to all VFs for which the RX mode is
2934 * accept packets that match the unicast hash table.
2937 * The port identifier of the Ethernet device.
2939 * Unicast MAC address.
2941 * 1 - Set an unicast hash bit for receiving packets with the MAC address.
2942 * 0 - Clear an unicast hash bit.
2944 * - (0) if successful.
2945 * - (-ENOTSUP) if hardware doesn't support.
2946 * - (-ENODEV) if *port_id* invalid.
2947 * - (-EINVAL) if bad parameter.
2949 int rte_eth_dev_uc_hash_table_set(uint8_t port,struct ether_addr *addr,
2953 * Updates all unicast hash bitmaps for receiving packet with any Unicast
2954 * Ethernet MAC addresses,the packet is routed to all VFs for which the RX
2955 * mode is accept packets that match the unicast hash table.
2958 * The port identifier of the Ethernet device.
2960 * 1 - Set all unicast hash bitmaps for receiving all the Ethernet
2962 * 0 - Clear all unicast hash bitmaps
2964 * - (0) if successful.
2965 * - (-ENOTSUP) if hardware doesn't support.
2966 * - (-ENODEV) if *port_id* invalid.
2967 * - (-EINVAL) if bad parameter.
2969 int rte_eth_dev_uc_all_hash_table_set(uint8_t port,uint8_t on);
2972 * Set RX L2 Filtering mode of a VF of an Ethernet device.
2975 * The port identifier of the Ethernet device.
2979 * The RX mode mask, which is one or more of accepting Untagged Packets,
2980 * packets that match the PFUTA table, Broadcast and Multicast Promiscuous.
2981 * ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC,
2982 * ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used
2985 * 1 - Enable a VF RX mode.
2986 * 0 - Disable a VF RX mode.
2988 * - (0) if successful.
2989 * - (-ENOTSUP) if hardware doesn't support.
2990 * - (-ENOTSUP) if hardware doesn't support.
2991 * - (-EINVAL) if bad parameter.
2993 int rte_eth_dev_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mode,
2997 * Enable or disable a VF traffic transmit of the Ethernet device.
3000 * The port identifier of the Ethernet device.
3004 * 1 - Enable a VF traffic transmit.
3005 * 0 - Disable a VF traffic transmit.
3007 * - (0) if successful.
3008 * - (-ENODEV) if *port_id* invalid.
3009 * - (-ENOTSUP) if hardware doesn't support.
3010 * - (-EINVAL) if bad parameter.
3013 rte_eth_dev_set_vf_tx(uint8_t port,uint16_t vf, uint8_t on);
3016 * Enable or disable a VF traffic receive of an Ethernet device.
3019 * The port identifier of the Ethernet device.
3023 * 1 - Enable a VF traffic receive.
3024 * 0 - Disable a VF traffic receive.
3026 * - (0) if successful.
3027 * - (-ENOTSUP) if hardware doesn't support.
3028 * - (-ENODEV) if *port_id* invalid.
3029 * - (-EINVAL) if bad parameter.
3032 rte_eth_dev_set_vf_rx(uint8_t port,uint16_t vf, uint8_t on);
3035 * Enable/Disable hardware VF VLAN filtering by an Ethernet device of
3036 * received VLAN packets tagged with a given VLAN Tag Identifier.
3039 * The port identifier of the Ethernet device.
3041 * The VLAN Tag Identifier whose filtering must be enabled or disabled.
3043 * Bitmap listing which VFs participate in the VLAN filtering.
3045 * 1 - Enable VFs VLAN filtering.
3046 * 0 - Disable VFs VLAN filtering.
3048 * - (0) if successful.
3049 * - (-ENOTSUP) if hardware doesn't support.
3050 * - (-ENODEV) if *port_id* invalid.
3051 * - (-EINVAL) if bad parameter.
3054 rte_eth_dev_set_vf_vlan_filter(uint8_t port, uint16_t vlan_id,
3059 * Set a traffic mirroring rule on an Ethernet device
3062 * The port identifier of the Ethernet device.
3063 * @param mirror_conf
3064 * The pointer to the traffic mirroring structure describing the mirroring rule.
3065 * The *rte_eth_vm_mirror_conf* structure includes the type of mirroring rule,
3066 * destination pool and the value of rule if enable vlan or pool mirroring.
3069 * The index of traffic mirroring rule, we support four separated rules.
3071 * 1 - Enable a mirroring rule.
3072 * 0 - Disable a mirroring rule.
3074 * - (0) if successful.
3075 * - (-ENOTSUP) if hardware doesn't support this feature.
3076 * - (-ENODEV) if *port_id* invalid.
3077 * - (-EINVAL) if the mr_conf information is not correct.
3079 int rte_eth_mirror_rule_set(uint8_t port_id,
3080 struct rte_eth_vmdq_mirror_conf *mirror_conf,
3085 * Reset a traffic mirroring rule on an Ethernet device.
3088 * The port identifier of the Ethernet device.
3090 * The index of traffic mirroring rule, we support four separated rules.
3092 * - (0) if successful.
3093 * - (-ENOTSUP) if hardware doesn't support this feature.
3094 * - (-ENODEV) if *port_id* invalid.
3095 * - (-EINVAL) if bad parameter.
3097 int rte_eth_mirror_rule_reset(uint8_t port_id,
3101 * Set the rate limitation for a queue on an Ethernet device.
3104 * The port identifier of the Ethernet device.
3108 * The tx rate allocated from the total link speed for this queue.
3110 * - (0) if successful.
3111 * - (-ENOTSUP) if hardware doesn't support this feature.
3112 * - (-ENODEV) if *port_id* invalid.
3113 * - (-EINVAL) if bad parameter.
3115 int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx,
3119 * Set the rate limitation for a vf on an Ethernet device.
3122 * The port identifier of the Ethernet device.
3126 * The tx rate allocated from the total link speed for this VF id.
3128 * The queue mask which need to set the rate.
3130 * - (0) if successful.
3131 * - (-ENOTSUP) if hardware doesn't support this feature.
3132 * - (-ENODEV) if *port_id* invalid.
3133 * - (-EINVAL) if bad parameter.
3135 int rte_eth_set_vf_rate_limit(uint8_t port_id, uint16_t vf,
3136 uint16_t tx_rate, uint64_t q_msk);
3139 * Initialize bypass logic. This function needs to be called before
3140 * executing any other bypass API.
3143 * The port identifier of the Ethernet device.
3145 * - (0) if successful.
3146 * - (-ENOTSUP) if hardware doesn't support.
3147 * - (-EINVAL) if bad parameter.
3149 int rte_eth_dev_bypass_init(uint8_t port);
3152 * Return bypass state.
3155 * The port identifier of the Ethernet device.
3157 * The return bypass state.
3160 * - (3) Isolate mode
3162 * - (0) if successful.
3163 * - (-ENOTSUP) if hardware doesn't support.
3164 * - (-EINVAL) if bad parameter.
3166 int rte_eth_dev_bypass_state_show(uint8_t port, uint32_t *state);
3172 * The port identifier of the Ethernet device.
3174 * The current bypass state.
3177 * - (3) Isolate mode
3179 * - (0) if successful.
3180 * - (-ENOTSUP) if hardware doesn't support.
3181 * - (-EINVAL) if bad parameter.
3183 int rte_eth_dev_bypass_state_set(uint8_t port, uint32_t *new_state);
3186 * Return bypass state when given event occurs.
3189 * The port identifier of the Ethernet device.
3192 * - (1) Main power on (power button is pushed)
3193 * - (2) Auxiliary power on (power supply is being plugged)
3194 * - (3) Main power off (system shutdown and power supply is left plugged in)
3195 * - (4) Auxiliary power off (power supply is being unplugged)
3196 * - (5) Display or set the watchdog timer
3198 * The bypass state when given event occurred.
3201 * - (3) Isolate mode
3203 * - (0) if successful.
3204 * - (-ENOTSUP) if hardware doesn't support.
3205 * - (-EINVAL) if bad parameter.
3207 int rte_eth_dev_bypass_event_show(uint8_t port, uint32_t event, uint32_t *state);
3210 * Set bypass state when given event occurs.
3213 * The port identifier of the Ethernet device.
3216 * - (1) Main power on (power button is pushed)
3217 * - (2) Auxiliary power on (power supply is being plugged)
3218 * - (3) Main power off (system shutdown and power supply is left plugged in)
3219 * - (4) Auxiliary power off (power supply is being unplugged)
3220 * - (5) Display or set the watchdog timer
3222 * The assigned state when given event occurs.
3225 * - (3) Isolate mode
3227 * - (0) if successful.
3228 * - (-ENOTSUP) if hardware doesn't support.
3229 * - (-EINVAL) if bad parameter.
3231 int rte_eth_dev_bypass_event_store(uint8_t port, uint32_t event, uint32_t state);
3234 * Set bypass watchdog timeout count.
3237 * The port identifier of the Ethernet device.
3239 * The timeout to be set.
3240 * - (0) 0 seconds (timer is off)
3249 * - (0) if successful.
3250 * - (-ENOTSUP) if hardware doesn't support.
3251 * - (-EINVAL) if bad parameter.
3253 int rte_eth_dev_wd_timeout_store(uint8_t port, uint32_t timeout);
3256 * Get bypass firmware version.
3259 * The port identifier of the Ethernet device.
3261 * The firmware version
3263 * - (0) if successful.
3264 * - (-ENOTSUP) if hardware doesn't support.
3265 * - (-EINVAL) if bad parameter.
3267 int rte_eth_dev_bypass_ver_show(uint8_t port, uint32_t *ver);
3270 * Return bypass watchdog timeout in seconds
3273 * The port identifier of the Ethernet device.
3275 * The return watchdog timeout. "0" represents timer expired
3276 * - (0) 0 seconds (timer is off)
3285 * - (0) if successful.
3286 * - (-ENOTSUP) if hardware doesn't support.
3287 * - (-EINVAL) if bad parameter.
3289 int rte_eth_dev_bypass_wd_timeout_show(uint8_t port, uint32_t *wd_timeout);
3292 * Reset bypass watchdog timer
3295 * The port identifier of the Ethernet device.
3297 * - (0) if successful.
3298 * - (-ENOTSUP) if hardware doesn't support.
3299 * - (-EINVAL) if bad parameter.
3301 int rte_eth_dev_bypass_wd_reset(uint8_t port);
3304 * Configuration of Receive Side Scaling hash computation of Ethernet device.
3307 * The port identifier of the Ethernet device.
3309 * The new configuration to use for RSS hash computation on the port.
3311 * - (0) if successful.
3312 * - (-ENODEV) if port identifier is invalid.
3313 * - (-ENOTSUP) if hardware doesn't support.
3314 * - (-EINVAL) if bad parameter.
3316 int rte_eth_dev_rss_hash_update(uint8_t port_id,
3317 struct rte_eth_rss_conf *rss_conf);
3320 * Retrieve current configuration of Receive Side Scaling hash computation
3321 * of Ethernet device.
3324 * The port identifier of the Ethernet device.
3326 * Where to store the current RSS hash configuration of the Ethernet device.
3328 * - (0) if successful.
3329 * - (-ENODEV) if port identifier is invalid.
3330 * - (-ENOTSUP) if hardware doesn't support RSS.
3333 rte_eth_dev_rss_hash_conf_get(uint8_t port_id,
3334 struct rte_eth_rss_conf *rss_conf);
3340 * The port identifier of the Ethernet device.
3342 * The index of RX queue where to store RX packets matching the syn filter.
3344 * The pointer to the structure describing the syn filter rule.
3346 * - (0) if successful.
3347 * - (-ENOTSUP) if hardware doesn't support.
3348 * - (-EINVAL) if bad parameter.
3350 int rte_eth_dev_add_syn_filter(uint8_t port_id,
3351 struct rte_syn_filter *filter, uint16_t rx_queue);
3357 * The port identifier of the Ethernet device.
3359 * - (0) if successful.
3360 * - (-ENOTSUP) if hardware doesn't support.
3361 * - (-EINVAL) if bad parameter.
3363 int rte_eth_dev_remove_syn_filter(uint8_t port_id);
3369 * The port identifier of the Ethernet device.
3371 * The pointer to the structure describing the syn filter.
3373 * A pointer to get the queue index of syn filter.
3375 * - (0) if successful.
3376 * - (-ENOTSUP) if hardware doesn't support.
3377 * - (-EINVAL) if bad parameter.
3379 int rte_eth_dev_get_syn_filter(uint8_t port_id,
3380 struct rte_syn_filter *filter, uint16_t *rx_queue);
3383 * Add a new ethertype filter rule on an Ethernet device.
3386 * The port identifier of the Ethernet device.
3388 * The identifier of ethertype filter.
3390 * The pointer to the structure describing the ethertype filter rule.
3391 * The *rte_ethertype_filter* structure includes the values of the different
3392 * fields to match: ethertype and priority in vlan tag.
3393 * priority in vlan tag is not supported for E1000 dev.
3395 * The index of the RX queue where to store RX packets matching the added
3398 * - (0) if successful.
3399 * - (-ENOTSUP) if hardware doesn't support ethertype filter.
3400 * - (-ENODEV) if *port_id* invalid.
3401 * - (-EINVAL) if the filter information is not correct.
3403 int rte_eth_dev_add_ethertype_filter(uint8_t port_id, uint16_t index,
3404 struct rte_ethertype_filter *filter, uint16_t rx_queue);
3407 * remove an ethertype filter rule on an Ethernet device.
3410 * The port identifier of the Ethernet device.
3412 * The identifier of ethertype filter.
3414 * - (0) if successful.
3415 * - (-ENOTSUP) if hardware doesn't support ethertype filter.
3416 * - (-ENODEV) if *port_id* invalid.
3417 * - (-EINVAL) if the filter information is not correct.
3419 int rte_eth_dev_remove_ethertype_filter(uint8_t port_id,
3423 * Get an ethertype filter rule on an Ethernet device.
3426 * The port identifier of the Ethernet device.
3428 * The identifier of ethertype filter.
3430 * A pointer to a structure of type *rte_ethertype_filter* to be filled with
3431 * the information of the Ethertype filter.
3433 * A pointer to get the queue index.
3435 * - (0) if successful.
3436 * - (-ENOTSUP) if hardware doesn't support ethertype filter.
3437 * - (-ENODEV) if *port_id* invalid.
3438 * - (-EINVAL) if the filter information is not correct.
3439 * - (-ENOENT) if no enabled filter in this index.
3441 int rte_eth_dev_get_ethertype_filter(uint8_t port_id, uint16_t index,
3442 struct rte_ethertype_filter *filter, uint16_t *rx_queue);
3445 * Add a new 2tuple filter rule on an Ethernet device.
3448 * The port identifier of the Ethernet device.
3450 * The identifier of 2tuple filter.
3452 * The pointer to the structure describing the 2tuple filter rule.
3453 * The *rte_2tuple_filter* structure includes the values of the different
3454 * fields to match: protocol, dst_port and
3455 * tcp_flags if the protocol is tcp type.
3457 * The index of the RX queue where to store RX packets matching the added
3460 * - (0) if successful.
3461 * - (-ENOTSUP) if hardware doesn't support 2tuple filter.
3462 * - (-ENODEV) if *port_id* invalid.
3463 * - (-EINVAL) if the filter information is not correct.
3465 int rte_eth_dev_add_2tuple_filter(uint8_t port_id, uint16_t index,
3466 struct rte_2tuple_filter *filter, uint16_t rx_queue);
3469 * remove a 2tuple filter rule on an Ethernet device.
3472 * The port identifier of the Ethernet device.
3474 * The identifier of 2tuple filter.
3476 * - (0) if successful.
3477 * - (-ENOTSUP) if hardware doesn't support 2tuple filter.
3478 * - (-ENODEV) if *port_id* invalid.
3479 * - (-EINVAL) if the filter information is not correct.
3481 int rte_eth_dev_remove_2tuple_filter(uint8_t port_id, uint16_t index);
3484 * Get an 2tuple filter rule on an Ethernet device.
3487 * The port identifier of the Ethernet device.
3489 * The identifier of 2tuple filter.
3491 * A pointer to a structure of type *rte_2tuple_filter* to be filled with
3492 * the information of the 2tuple filter.
3494 * A pointer to get the queue index.
3496 * - (0) if successful.
3497 * - (-ENOTSUP) if hardware doesn't support 2tuple filter.
3498 * - (-ENODEV) if *port_id* invalid.
3499 * - (-EINVAL) if the filter information is not correct.
3500 * - (-ENOENT) if no enabled filter in this index.
3502 int rte_eth_dev_get_2tuple_filter(uint8_t port_id, uint16_t index,
3503 struct rte_2tuple_filter *filter, uint16_t *rx_queue);
3506 * Add a new 5tuple filter rule on an Ethernet device.
3509 * The port identifier of the Ethernet device.
3511 * The identifier of 5tuple filter.
3513 * The pointer to the structure describing the 5tuple filter rule.
3514 * The *rte_5tuple_filter* structure includes the values of the different
3515 * fields to match: dst src IP, dst src port, protocol and relative masks
3517 * The index of the RX queue where to store RX packets matching the added
3520 * - (0) if successful.
3521 * - (-ENOTSUP) if hardware doesn't support 5tuple filter.
3522 * - (-ENODEV) if *port_id* invalid.
3523 * - (-EINVAL) if the filter information is not correct.
3525 int rte_eth_dev_add_5tuple_filter(uint8_t port_id, uint16_t index,
3526 struct rte_5tuple_filter *filter, uint16_t rx_queue);
3529 * remove a 5tuple filter rule on an Ethernet device.
3532 * The port identifier of the Ethernet device.
3534 * The identifier of 5tuple filter.
3536 * - (0) if successful.
3537 * - (-ENOTSUP) if hardware doesn't support 5tuple filter.
3538 * - (-ENODEV) if *port_id* invalid.
3539 * - (-EINVAL) if the filter information is not correct.
3541 int rte_eth_dev_remove_5tuple_filter(uint8_t port_id, uint16_t index);
3544 * Get an 5tuple filter rule on an Ethernet device.
3547 * The port identifier of the Ethernet device.
3549 * The identifier of 5tuple filter.
3551 * A pointer to a structure of type *rte_5tuple_filter* to be filled with
3552 * the information of the 5tuple filter.
3554 * A pointer to get the queue index.
3556 * - (0) if successful.
3557 * - (-ENOTSUP) if hardware doesn't support 5tuple filter.
3558 * - (-ENODEV) if *port_id* invalid.
3559 * - (-EINVAL) if the filter information is not correct.
3561 int rte_eth_dev_get_5tuple_filter(uint8_t port_id, uint16_t index,
3562 struct rte_5tuple_filter *filter, uint16_t *rx_queue);
3565 * Add a new flex filter rule on an Ethernet device.
3568 * The port identifier of the Ethernet device.
3570 * The identifier of flex filter.
3572 * The pointer to the structure describing the flex filter rule.
3573 * The *rte_flex_filter* structure includes the values of the different fields
3574 * to match: the dwords (first len bytes of packet ) and relative masks.
3576 * The index of the RX queue where to store RX packets matching the added
3579 * - (0) if successful.
3580 * - (-ENOTSUP) if hardware doesn't support flex filter.
3581 * - (-ENODEV) if *port_id* invalid.
3582 * - (-EINVAL) if the filter information is not correct.
3583 * - (-ENOENT) if no enabled filter in this index.
3585 int rte_eth_dev_add_flex_filter(uint8_t port_id, uint16_t index,
3586 struct rte_flex_filter *filter, uint16_t rx_queue);
3589 * remove a flex filter rule on an Ethernet device.
3592 * The port identifier of the Ethernet device.
3594 * The identifier of flex filter.
3596 * - (0) if successful.
3597 * - (-ENOTSUP) if hardware doesn't support flex filter.
3598 * - (-ENODEV) if *port_id* invalid.
3599 * - (-EINVAL) if the filter information is not correct.
3601 int rte_eth_dev_remove_flex_filter(uint8_t port_id, uint16_t index);
3604 * Get an flex filter rule on an Ethernet device.
3607 * The port identifier of the Ethernet device.
3609 * The identifier of flex filter.
3611 * A pointer to a structure of type *rte_flex_filter* to be filled with
3612 * the information of the flex filter.
3614 * A pointer to get the queue index.
3616 * - (0) if successful.
3617 * - (-ENOTSUP) if hardware doesn't support flex filter.
3618 * - (-ENODEV) if *port_id* invalid.
3619 * - (-EINVAL) if the filter information is not correct.
3620 * - (-ENOENT) if no enabled filter in this index.
3622 int rte_eth_dev_get_flex_filter(uint8_t port_id, uint16_t index,
3623 struct rte_flex_filter *filter, uint16_t *rx_queue);
3629 #endif /* _RTE_ETHDEV_H_ */