4 * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
11 * * Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * * Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in
15 * the documentation and/or other materials provided with the
17 * * Neither the name of Intel Corporation nor the names of its
18 * contributors may be used to endorse or promote products derived
19 * from this software without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39 #include <rte_atomic.h>
41 #include <rte_memory.h>
42 #include <rte_memzone.h>
43 #include <rte_mempool.h>
45 #include "virtio_pci.h"
46 #include "virtio_ring.h"
47 #include "virtio_logs.h"
50 #define wmb() rte_wmb()
51 #define rmb() rte_rmb()
53 #ifdef RTE_PMD_PACKET_PREFETCH
54 #define rte_packet_prefetch(p) rte_prefetch1(p)
56 #define rte_packet_prefetch(p) do {} while(0)
59 #define VIRTQUEUE_MAX_NAME_SZ 32
61 #define RTE_MBUF_DATA_DMA_ADDR(mb) \
62 (uint64_t) ((mb)->buf_physaddr + (mb)->data_off)
64 #define VTNET_SQ_RQ_QUEUE_IDX 0
65 #define VTNET_SQ_TQ_QUEUE_IDX 1
66 #define VTNET_SQ_CQ_QUEUE_IDX 2
68 enum { VTNET_RQ = 0, VTNET_TQ = 1, VTNET_CQ = 2 };
70 * The maximum virtqueue size is 2^15. Use that value as the end of
71 * descriptor chain terminator since it will never be a valid index
72 * in the descriptor table. This is used to verify we are correctly
73 * handling vq_free_cnt.
75 #define VQ_RING_DESC_CHAIN_END 32768
78 * Control the RX mode, ie. promiscuous, allmulti, etc...
79 * All commands require an "out" sg entry containing a 1 byte
80 * state value, zero = disable, non-zero = enable. Commands
81 * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
82 * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
84 #define VIRTIO_NET_CTRL_RX 0
85 #define VIRTIO_NET_CTRL_RX_PROMISC 0
86 #define VIRTIO_NET_CTRL_RX_ALLMULTI 1
87 #define VIRTIO_NET_CTRL_RX_ALLUNI 2
88 #define VIRTIO_NET_CTRL_RX_NOMULTI 3
89 #define VIRTIO_NET_CTRL_RX_NOUNI 4
90 #define VIRTIO_NET_CTRL_RX_NOBCAST 5
93 * Control VLAN filtering
95 * The VLAN filter table is controlled via a simple ADD/DEL interface.
96 * VLAN IDs not added may be filtered by the hypervisor. Del is the
97 * opposite of add. Both commands expect an out entry containing a 2
98 * byte VLAN ID. VLAN filtering is available with the
99 * VIRTIO_NET_F_CTRL_VLAN feature bit.
101 #define VIRTIO_NET_CTRL_VLAN 2
102 #define VIRTIO_NET_CTRL_VLAN_ADD 0
103 #define VIRTIO_NET_CTRL_VLAN_DEL 1
105 struct virtio_net_ctrl_hdr {
108 } __attribute__((packed));
110 typedef uint8_t virtio_net_ctrl_ack;
112 #define VIRTIO_NET_OK 0
113 #define VIRTIO_NET_ERR 1
115 #define VIRTIO_MAX_CTRL_DATA 128
117 struct virtio_pmd_ctrl {
118 struct virtio_net_ctrl_hdr hdr;
119 virtio_net_ctrl_ack status;
120 uint8_t data[VIRTIO_MAX_CTRL_DATA];
124 struct virtio_hw *hw; /**< virtio_hw structure pointer. */
125 const struct rte_memzone *mz; /**< mem zone to populate RX ring. */
126 const struct rte_memzone *virtio_net_hdr_mz; /**< memzone to populate hdr. */
127 struct rte_mempool *mpool; /**< mempool for mbuf allocation */
128 uint16_t queue_id; /**< DPDK queue index. */
129 uint8_t port_id; /**< Device port identifier. */
131 void *vq_ring_virt_mem; /**< linear address of vring*/
134 phys_addr_t vq_ring_mem; /**< physical address of vring */
136 struct vring vq_ring; /**< vring keeping desc, used and avail */
137 uint16_t vq_free_cnt; /**< num of desc available */
138 uint16_t vq_nentries; /**< vring desc numbers */
139 uint16_t vq_queue_index; /**< PCI queue index */
141 * Head of the free chain in the descriptor table. If
142 * there are no free descriptors, this will be set to
143 * VQ_RING_DESC_CHAIN_END.
145 uint16_t vq_desc_head_idx;
146 uint16_t vq_desc_tail_idx;
148 * Last consumed descriptor in the used table,
149 * trails vq_ring.used->idx.
151 uint16_t vq_used_cons_idx;
152 uint16_t vq_avail_idx;
153 phys_addr_t virtio_net_hdr_mem; /**< hdr for each xmit packet */
160 struct vq_desc_extra {
166 /* If multiqueue is provided by host, then we suppport it. */
167 #ifndef VIRTIO_NET_F_MQ
168 /* Device supports Receive Flow Steering */
169 #define VIRTIO_NET_F_MQ 0x400000
170 #define VIRTIO_NET_CTRL_MQ 4
171 #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET 0
172 #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1
173 #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000
177 * This is the first element of the scatter-gather list. If you don't
178 * specify GSO or CSUM features, you can simply ignore the header.
180 struct virtio_net_hdr {
181 #define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 /**< Use csum_start,csum_offset*/
183 #define VIRTIO_NET_HDR_GSO_NONE 0 /**< Not a GSO frame */
184 #define VIRTIO_NET_HDR_GSO_TCPV4 1 /**< GSO frame, IPv4 TCP (TSO) */
185 #define VIRTIO_NET_HDR_GSO_UDP 3 /**< GSO frame, IPv4 UDP (UFO) */
186 #define VIRTIO_NET_HDR_GSO_TCPV6 4 /**< GSO frame, IPv6 TCP */
187 #define VIRTIO_NET_HDR_GSO_ECN 0x80 /**< TCP has ECN set */
189 uint16_t hdr_len; /**< Ethernet + IP + tcp/udp hdrs */
190 uint16_t gso_size; /**< Bytes to append to hdr_len per frame */
191 uint16_t csum_start; /**< Position to start checksumming from */
192 uint16_t csum_offset; /**< Offset after that to place checksum */
196 * This is the version of the header to use when the MRG_RXBUF
197 * feature has been negotiated.
199 struct virtio_net_hdr_mrg_rxbuf {
200 struct virtio_net_hdr hdr;
201 uint16_t num_buffers; /**< Number of merged rx buffers */
205 * Tell the backend not to interrupt us.
207 void virtqueue_disable_intr(struct virtqueue *vq);
209 * Dump virtqueue internal structures, for debug purpose only.
211 void virtqueue_dump(struct virtqueue *vq);
213 * Get all mbufs to be freed.
215 struct rte_mbuf *virtqueue_detatch_unused(struct virtqueue *vq);
218 virtqueue_full(const struct virtqueue *vq)
220 return vq->vq_free_cnt == 0;
223 #define VIRTQUEUE_NUSED(vq) ((uint16_t)((vq)->vq_ring.used->idx - (vq)->vq_used_cons_idx))
226 vq_update_avail_idx(struct virtqueue *vq)
228 rte_compiler_barrier();
229 vq->vq_ring.avail->idx = vq->vq_avail_idx;
233 vq_update_avail_ring(struct virtqueue *vq, uint16_t desc_idx)
237 * Place the head of the descriptor chain into the next slot and make
238 * it usable to the host. The chain is made available now rather than
239 * deferring to virtqueue_notify() in the hopes that if the host is
240 * currently running on another CPU, we can keep it processing the new
243 avail_idx = (uint16_t)(vq->vq_avail_idx & (vq->vq_nentries - 1));
244 vq->vq_ring.avail->ring[avail_idx] = desc_idx;
249 virtqueue_kick_prepare(struct virtqueue *vq)
251 return !(vq->vq_ring.used->flags & VRING_USED_F_NO_NOTIFY);
255 virtqueue_notify(struct virtqueue *vq)
258 * Ensure updated avail->idx is visible to host. mb() necessary?
259 * For virtio on IA, the notificaiton is through io port operation
260 * which is a serialization instruction itself.
262 VIRTIO_WRITE_REG_2(vq->hw, VIRTIO_PCI_QUEUE_NOTIFY, vq->vq_queue_index);
265 #ifdef RTE_LIBRTE_VIRTIO_DEBUG_DUMP
266 #define VIRTQUEUE_DUMP(vq) do { \
267 uint16_t used_idx, nused; \
268 used_idx = (vq)->vq_ring.used->idx; \
269 nused = (uint16_t)(used_idx - (vq)->vq_used_cons_idx); \
270 PMD_INIT_LOG(DEBUG, \
271 "VQ: - size=%d; free=%d; used=%d; desc_head_idx=%d;" \
272 " avail.idx=%d; used_cons_idx=%d; used.idx=%d;" \
273 " avail.flags=0x%x; used.flags=0x%x", \
274 (vq)->vq_nentries, (vq)->vq_free_cnt, nused, \
275 (vq)->vq_desc_head_idx, (vq)->vq_ring.avail->idx, \
276 (vq)->vq_used_cons_idx, (vq)->vq_ring.used->idx, \
277 (vq)->vq_ring.avail->flags, (vq)->vq_ring.used->flags); \
280 #define VIRTQUEUE_DUMP(vq) do { } while (0)
283 #endif /* _VIRTQUEUE_H_ */