3 # Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
4 # Copyright(c) 2014-2015 6WIND S.A.
7 # Redistribution and use in source and binary forms, with or without
8 # modification, are permitted provided that the following conditions
11 # * Redistributions of source code must retain the above copyright
12 # notice, this list of conditions and the following disclaimer.
13 # * Redistributions in binary form must reproduce the above copyright
14 # notice, this list of conditions and the following disclaimer in
15 # the documentation and/or other materials provided with the
17 # * Neither the name of Intel Corporation nor the names of its
18 # contributors may be used to endorse or promote products derived
19 # from this software without specific prior written permission.
21 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 include $(RTE_SDK)/mk/internal/rte.compile-pre.mk
34 include $(RTE_SDK)/mk/internal/rte.install-pre.mk
35 include $(RTE_SDK)/mk/internal/rte.clean-pre.mk
36 include $(RTE_SDK)/mk/internal/rte.build-pre.mk
38 # VPATH contains at least SRCDIR
42 _INSTALL = $(INSTALL-FILES-y) $(SYMLINK-FILES-y)
43 _INSTALL += $(RTE_OUTPUT)/app/$(APP) $(RTE_OUTPUT)/app/$(APP).map
44 POSTINSTALL += target-appinstall
46 POSTCLEAN += target-appclean
48 ifeq ($(NO_LDSCRIPT),)
49 LDSCRIPT = $(RTE_LDSCRIPT)
52 # Link only the libraries used in the application
53 LDFLAGS += --as-needed
55 # default path for libs
56 _LDLIBS-y += -L$(RTE_SDK_BIN)/lib
59 # Order is important: from higher level to lower level
61 _LDLIBS-$(CONFIG_RTE_LIBRTE_PIPELINE) += -lrte_pipeline
62 _LDLIBS-$(CONFIG_RTE_LIBRTE_TABLE) += -lrte_table
63 _LDLIBS-$(CONFIG_RTE_LIBRTE_PORT) += -lrte_port
65 _LDLIBS-$(CONFIG_RTE_LIBRTE_PDUMP) += -lrte_pdump
66 _LDLIBS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += -lrte_distributor
67 _LDLIBS-$(CONFIG_RTE_LIBRTE_IP_FRAG) += -lrte_ip_frag
68 _LDLIBS-$(CONFIG_RTE_LIBRTE_GRO) += -lrte_gro
69 _LDLIBS-$(CONFIG_RTE_LIBRTE_GSO) += -lrte_gso
70 _LDLIBS-$(CONFIG_RTE_LIBRTE_METER) += -lrte_meter
71 _LDLIBS-$(CONFIG_RTE_LIBRTE_SCHED) += -lrte_sched
72 _LDLIBS-$(CONFIG_RTE_LIBRTE_LPM) += -lrte_lpm
73 # librte_acl needs --whole-archive because of weak functions
74 _LDLIBS-$(CONFIG_RTE_LIBRTE_ACL) += --whole-archive
75 _LDLIBS-$(CONFIG_RTE_LIBRTE_ACL) += -lrte_acl
76 _LDLIBS-$(CONFIG_RTE_LIBRTE_ACL) += --no-whole-archive
77 _LDLIBS-$(CONFIG_RTE_LIBRTE_JOBSTATS) += -lrte_jobstats
78 _LDLIBS-$(CONFIG_RTE_LIBRTE_METRICS) += -lrte_metrics
79 _LDLIBS-$(CONFIG_RTE_LIBRTE_BITRATE) += -lrte_bitratestats
80 _LDLIBS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) += -lrte_latencystats
81 _LDLIBS-$(CONFIG_RTE_LIBRTE_POWER) += -lrte_power
83 _LDLIBS-$(CONFIG_RTE_LIBRTE_TIMER) += -lrte_timer
84 _LDLIBS-$(CONFIG_RTE_LIBRTE_EFD) += -lrte_efd
85 _LDLIBS-$(CONFIG_RTE_LIBRTE_CFGFILE) += -lrte_cfgfile
87 _LDLIBS-y += --whole-archive
89 _LDLIBS-$(CONFIG_RTE_LIBRTE_HASH) += -lrte_hash
90 _LDLIBS-$(CONFIG_RTE_LIBRTE_MEMBER) += -lrte_member
91 _LDLIBS-$(CONFIG_RTE_LIBRTE_VHOST) += -lrte_vhost
92 _LDLIBS-$(CONFIG_RTE_LIBRTE_KVARGS) += -lrte_kvargs
93 _LDLIBS-$(CONFIG_RTE_LIBRTE_MBUF) += -lrte_mbuf
94 _LDLIBS-$(CONFIG_RTE_LIBRTE_NET) += -lrte_net
95 _LDLIBS-$(CONFIG_RTE_LIBRTE_ETHER) += -lrte_ethdev
96 _LDLIBS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += -lrte_cryptodev
97 _LDLIBS-$(CONFIG_RTE_LIBRTE_EVENTDEV) += -lrte_eventdev
98 _LDLIBS-$(CONFIG_RTE_LIBRTE_MEMPOOL) += -lrte_mempool
99 _LDLIBS-$(CONFIG_RTE_DRIVER_MEMPOOL_RING) += -lrte_mempool_ring
100 _LDLIBS-$(CONFIG_RTE_LIBRTE_RING) += -lrte_ring
101 _LDLIBS-$(CONFIG_RTE_LIBRTE_EAL) += -lrte_eal
102 _LDLIBS-$(CONFIG_RTE_LIBRTE_CMDLINE) += -lrte_cmdline
103 _LDLIBS-$(CONFIG_RTE_LIBRTE_REORDER) += -lrte_reorder
105 ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
106 _LDLIBS-$(CONFIG_RTE_LIBRTE_KNI) += -lrte_kni
109 ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n)
110 # plugins (link only if static libraries)
112 _LDLIBS-$(CONFIG_RTE_DRIVER_MEMPOOL_STACK) += -lrte_mempool_stack
114 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AF_PACKET) += -lrte_pmd_af_packet
115 _LDLIBS-$(CONFIG_RTE_LIBRTE_ARK_PMD) += -lrte_pmd_ark
116 _LDLIBS-$(CONFIG_RTE_LIBRTE_AVP_PMD) += -lrte_pmd_avp
117 _LDLIBS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += -lrte_pmd_bnx2x -lz
118 _LDLIBS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += -lrte_pmd_bnxt
119 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_BOND) += -lrte_pmd_bond
120 _LDLIBS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += -lrte_pmd_cxgbe
121 ifeq ($(CONFIG_RTE_LIBRTE_DPAA_BUS),y)
122 _LDLIBS-$(CONFIG_RTE_LIBRTE_DPAA_BUS) += -lrte_bus_dpaa
123 _LDLIBS-$(CONFIG_RTE_LIBRTE_DPAA_MEMPOOL) += -lrte_mempool_dpaa
124 _LDLIBS-$(CONFIG_RTE_LIBRTE_DPAA_PMD) += -lrte_pmd_dpaa
126 _LDLIBS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += -lrte_pmd_dpaa2
127 _LDLIBS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += -lrte_pmd_e1000
128 _LDLIBS-$(CONFIG_RTE_LIBRTE_ENA_PMD) += -lrte_pmd_ena
129 _LDLIBS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += -lrte_pmd_enic
130 _LDLIBS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += -lrte_pmd_fm10k
131 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += -lrte_pmd_failsafe
132 _LDLIBS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += -lrte_pmd_i40e
133 _LDLIBS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += -lrte_pmd_ixgbe
134 ifeq ($(CONFIG_RTE_LIBRTE_KNI),y)
135 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += -lrte_pmd_kni
137 _LDLIBS-$(CONFIG_RTE_LIBRTE_LIO_PMD) += -lrte_pmd_lio
138 _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += -lrte_pmd_mlx4 -libverbs
139 _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += -lrte_pmd_mlx5 -libverbs -lmlx5
140 _LDLIBS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += -lrte_pmd_nfp
141 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL) += -lrte_pmd_null
142 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_PCAP) += -lrte_pmd_pcap -lpcap
143 _LDLIBS-$(CONFIG_RTE_LIBRTE_QEDE_PMD) += -lrte_pmd_qede
144 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_RING) += -lrte_pmd_ring
145 _LDLIBS-$(CONFIG_RTE_LIBRTE_SFC_EFX_PMD) += -lrte_pmd_sfc_efx
146 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SZEDATA2) += -lrte_pmd_szedata2 -lsze2
147 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_TAP) += -lrte_pmd_tap
148 _LDLIBS-$(CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD) += -lrte_pmd_thunderx_nicvf
149 _LDLIBS-$(CONFIG_RTE_LIBRTE_VIRTIO_PMD) += -lrte_pmd_virtio
150 ifeq ($(CONFIG_RTE_LIBRTE_VHOST),y)
151 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_VHOST) += -lrte_pmd_vhost
152 endif # $(CONFIG_RTE_LIBRTE_VHOST)
153 _LDLIBS-$(CONFIG_RTE_LIBRTE_VMXNET3_PMD) += -lrte_pmd_vmxnet3_uio
155 ifeq ($(CONFIG_RTE_LIBRTE_CRYPTODEV),y)
156 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += -lrte_pmd_aesni_mb
157 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += -L$(AESNI_MULTI_BUFFER_LIB_PATH) -lIPSec_MB
158 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_GCM) += -lrte_pmd_aesni_gcm
159 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_GCM) += -L$(AESNI_MULTI_BUFFER_LIB_PATH) -lIPSec_MB
160 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_OPENSSL) += -lrte_pmd_openssl -lcrypto
161 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO) += -lrte_pmd_null_crypto
162 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += -lrte_pmd_qat -lcrypto
163 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G) += -lrte_pmd_snow3g
164 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G) += -L$(LIBSSO_SNOW3G_PATH)/build -lsso_snow3g
165 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_KASUMI) += -lrte_pmd_kasumi
166 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_KASUMI) += -L$(LIBSSO_KASUMI_PATH)/build -lsso_kasumi
167 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ZUC) += -lrte_pmd_zuc
168 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ZUC) += -L$(LIBSSO_ZUC_PATH)/build -lsso_zuc
169 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO) += -lrte_pmd_armv8
170 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO) += -L$(ARMV8_CRYPTO_LIB_PATH) -larmv8_crypto
171 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += -lrte_pmd_crypto_scheduler
172 ifeq ($(CONFIG_RTE_LIBRTE_FSLMC_BUS),y)
173 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += -lrte_pmd_dpaa2_sec
174 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += -lrte_mempool_dpaa2
175 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += -lrte_bus_fslmc
176 endif # CONFIG_RTE_LIBRTE_FSLMC_BUS
177 endif # CONFIG_RTE_LIBRTE_CRYPTODEV
179 ifeq ($(CONFIG_RTE_LIBRTE_EVENTDEV),y)
180 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV) += -lrte_pmd_skeleton_event
181 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += -lrte_pmd_sw_event
182 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF) += -lrte_pmd_octeontx_ssovf
183 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV) += -lrte_pmd_dpaa2_event
184 _LDLIBS-$(CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL) += -lrte_mempool_octeontx
185 endif # CONFIG_RTE_LIBRTE_EVENTDEV
187 ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_PMD),y)
188 _LDLIBS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += -lrte_bus_fslmc
189 _LDLIBS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += -lrte_mempool_dpaa2
190 endif # CONFIG_RTE_LIBRTE_DPAA2_PMD
192 endif # !CONFIG_RTE_BUILD_SHARED_LIBS
194 _LDLIBS-y += --no-whole-archive
196 ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n)
197 # The static libraries do not know their dependencies.
198 # So linking with static library requires explicit dependencies.
199 _LDLIBS-$(CONFIG_RTE_LIBRTE_EAL) += -lrt
200 ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP)$(CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES),yy)
201 _LDLIBS-$(CONFIG_RTE_LIBRTE_EAL) += -lnuma
203 _LDLIBS-$(CONFIG_RTE_LIBRTE_SCHED) += -lm
204 _LDLIBS-$(CONFIG_RTE_LIBRTE_SCHED) += -lrt
205 _LDLIBS-$(CONFIG_RTE_LIBRTE_MEMBER) += -lm
206 _LDLIBS-$(CONFIG_RTE_LIBRTE_METER) += -lm
207 ifeq ($(CONFIG_RTE_LIBRTE_VHOST_NUMA),y)
208 _LDLIBS-$(CONFIG_RTE_LIBRTE_VHOST) += -lnuma
210 _LDLIBS-$(CONFIG_RTE_PORT_PCAP) += -lpcap
211 endif # !CONFIG_RTE_BUILD_SHARED_LIBS
213 _LDLIBS-y += $(EXECENV_LDLIBS)
215 LDLIBS += $(_LDLIBS-y) $(CPU_LDLIBS) $(EXTRA_LDLIBS)
217 # all the words except the first one
218 allbutfirst = $(wordlist 2,$(words $(1)),$(1))
220 # Eliminate duplicates without sorting, only keep the last occurrence
225 $(filter $(firstword $(1)),$(call allbutfirst,$(1))),\
226 $(filter -l%,$(firstword $(1)))),\
229 $(call filter-libs,$(call allbutfirst,$(1)))))
231 LDLIBS := $(call filter-libs,$(LDLIBS))
233 ifeq ($(RTE_DEVEL_BUILD)$(CONFIG_RTE_BUILD_SHARED_LIB),yy)
234 LDFLAGS += -rpath=$(RTE_SDK_BIN)/lib
237 MAPFLAGS = -Map=$@.map --cref
243 install: build _postinstall
250 exe2cmd = $(strip $(call dotfile,$(patsubst %,%.cmd,$(1))))
252 ifeq ($(LINK_USING_CC),1)
253 O_TO_EXE = $(CC) -o $@ $(CFLAGS) $(EXTRA_CFLAGS) $(OBJS-y) $(call linkerprefix, \
254 $(LDLIBS) $(LDFLAGS) $(LDFLAGS_$(@)) $(EXTRA_LDFLAGS) \
257 O_TO_EXE = $(LD) -o $@ $(OBJS-y) \
258 $(LDLIBS) $(LDFLAGS) $(LDFLAGS_$(@)) $(EXTRA_LDFLAGS) \
261 O_TO_EXE_STR = $(subst ','\'',$(O_TO_EXE)) #'# fix syntax highlight
262 O_TO_EXE_DISP = $(if $(V),"$(O_TO_EXE_STR)"," LD $(@)")
263 O_TO_EXE_CMD = "cmd_$@ = $(O_TO_EXE_STR)"
264 O_TO_EXE_DO = @set -e; \
265 echo $(O_TO_EXE_DISP); \
267 echo $(O_TO_EXE_CMD) > $(call exe2cmd,$(@))
271 # path where libraries are retrieved
272 LDLIBS_PATH := $(subst -Wl$(comma)-L,,$(filter -Wl$(comma)-L%,$(LDLIBS)))
273 LDLIBS_PATH += $(subst -L,,$(filter -L%,$(LDLIBS)))
275 # list of .a files that are linked to this application
276 LDLIBS_NAMES := $(patsubst -l%,lib%.a,$(filter -l%,$(LDLIBS)))
277 LDLIBS_NAMES += $(patsubst -Wl$(comma)-l%,lib%.a,$(filter -Wl$(comma)-l%,$(LDLIBS)))
279 # list of found libraries files (useful for deps). If not found, the
280 # library is silently ignored and dep won't be checked
281 LDLIBS_FILES := $(wildcard $(foreach dir,$(LDLIBS_PATH),\
282 $(addprefix $(dir)/,$(LDLIBS_NAMES))))
285 # Compile executable file if needed
287 $(APP): $(OBJS-y) $(LDLIBS_FILES) $(DEP_$(APP)) $(LDSCRIPT) FORCE
288 @[ -d $(dir $@) ] || mkdir -p $(dir $@)
290 @echo -n "$< -> $@ " ; \
291 echo -n "file_missing=$(call boolean,$(file_missing)) " ; \
292 echo -n "cmdline_changed=$(call boolean,$(call cmdline_changed,$(O_TO_EXE_STR))) " ; \
293 echo -n "depfile_missing=$(call boolean,$(depfile_missing)) " ; \
294 echo "depfile_newer=$(call boolean,$(depfile_newer)) ")
297 $(call cmdline_changed,$(O_TO_EXE_STR)),\
303 # install app in $(RTE_OUTPUT)/app
305 $(RTE_OUTPUT)/app/$(APP): $(APP)
306 @echo " INSTALL-APP $(APP)"
307 @[ -d $(RTE_OUTPUT)/app ] || mkdir -p $(RTE_OUTPUT)/app
308 $(Q)cp -f $(APP) $(RTE_OUTPUT)/app
311 # install app map file in $(RTE_OUTPUT)/app
313 $(RTE_OUTPUT)/app/$(APP).map: $(APP)
314 @echo " INSTALL-MAP $(APP).map"
315 @[ -d $(RTE_OUTPUT)/app ] || mkdir -p $(RTE_OUTPUT)/app
316 $(Q)cp -f $(APP).map $(RTE_OUTPUT)/app
319 # Clean all generated files
323 $(Q)rm -f $(_BUILD_TARGETS) $(_INSTALL_TARGETS) $(_CLEAN_TARGETS)
327 $(Q)rm -rf $(APP) $(OBJS-all) $(DEPS-all) $(DEPSTMP-all) \
328 $(CMDS-all) $(INSTALL-FILES-all) .$(APP).cmd $(APP).map
331 include $(RTE_SDK)/mk/internal/rte.compile-post.mk
332 include $(RTE_SDK)/mk/internal/rte.install-post.mk
333 include $(RTE_SDK)/mk/internal/rte.clean-post.mk
334 include $(RTE_SDK)/mk/internal/rte.build-post.mk
336 ifneq ($(wildcard $(RTE_SDK)/mk/target/$(RTE_TARGET)/rte.app.mk),)
337 include $(RTE_SDK)/mk/target/$(RTE_TARGET)/rte.app.mk
339 include $(RTE_SDK)/mk/target/generic/rte.app.mk