3 # Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
4 # Copyright(c) 2014-2015 6WIND S.A.
7 # Redistribution and use in source and binary forms, with or without
8 # modification, are permitted provided that the following conditions
11 # * Redistributions of source code must retain the above copyright
12 # notice, this list of conditions and the following disclaimer.
13 # * Redistributions in binary form must reproduce the above copyright
14 # notice, this list of conditions and the following disclaimer in
15 # the documentation and/or other materials provided with the
17 # * Neither the name of Intel Corporation nor the names of its
18 # contributors may be used to endorse or promote products derived
19 # from this software without specific prior written permission.
21 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 include $(RTE_SDK)/mk/internal/rte.compile-pre.mk
34 include $(RTE_SDK)/mk/internal/rte.install-pre.mk
35 include $(RTE_SDK)/mk/internal/rte.clean-pre.mk
36 include $(RTE_SDK)/mk/internal/rte.build-pre.mk
38 # VPATH contains at least SRCDIR
42 _INSTALL = $(INSTALL-FILES-y) $(SYMLINK-FILES-y)
43 _INSTALL += $(RTE_OUTPUT)/app/$(APP) $(RTE_OUTPUT)/app/$(APP).map
44 POSTINSTALL += target-appinstall
46 POSTCLEAN += target-appclean
48 ifeq ($(NO_LDSCRIPT),)
49 LDSCRIPT = $(RTE_LDSCRIPT)
52 # Link only the libraries used in the application
53 LDFLAGS += --as-needed
55 # default path for libs
56 _LDLIBS-y += -L$(RTE_SDK_BIN)/lib
59 # Order is important: from higher level to lower level
62 ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
63 _LDLIBS-$(CONFIG_RTE_LIBRTE_KNI) += -lrte_kni
66 _LDLIBS-$(CONFIG_RTE_LIBRTE_PIPELINE) += -lrte_pipeline
67 _LDLIBS-$(CONFIG_RTE_LIBRTE_TABLE) += -lrte_table
68 _LDLIBS-$(CONFIG_RTE_LIBRTE_PORT) += -lrte_port
70 _LDLIBS-$(CONFIG_RTE_LIBRTE_PDUMP) += -lrte_pdump
71 _LDLIBS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += -lrte_distributor
72 _LDLIBS-$(CONFIG_RTE_LIBRTE_IP_FRAG) += -lrte_ip_frag
73 _LDLIBS-$(CONFIG_RTE_LIBRTE_METER) += -lrte_meter
74 _LDLIBS-$(CONFIG_RTE_LIBRTE_SCHED) += -lrte_sched
75 _LDLIBS-$(CONFIG_RTE_LIBRTE_LPM) += -lrte_lpm
76 # librte_acl needs --whole-archive because of weak functions
77 _LDLIBS-$(CONFIG_RTE_LIBRTE_ACL) += --whole-archive
78 _LDLIBS-$(CONFIG_RTE_LIBRTE_ACL) += -lrte_acl
79 _LDLIBS-$(CONFIG_RTE_LIBRTE_ACL) += --no-whole-archive
80 _LDLIBS-$(CONFIG_RTE_LIBRTE_JOBSTATS) += -lrte_jobstats
81 _LDLIBS-$(CONFIG_RTE_LIBRTE_POWER) += -lrte_power
83 _LDLIBS-$(CONFIG_RTE_LIBRTE_TIMER) += -lrte_timer
84 _LDLIBS-$(CONFIG_RTE_LIBRTE_EFD) += -lrte_efd
85 _LDLIBS-$(CONFIG_RTE_LIBRTE_CFGFILE) += -lrte_cfgfile
87 _LDLIBS-y += --whole-archive
89 _LDLIBS-$(CONFIG_RTE_LIBRTE_HASH) += -lrte_hash
90 _LDLIBS-$(CONFIG_RTE_LIBRTE_VHOST) += -lrte_vhost
91 _LDLIBS-$(CONFIG_RTE_LIBRTE_KVARGS) += -lrte_kvargs
92 _LDLIBS-$(CONFIG_RTE_LIBRTE_MBUF) += -lrte_mbuf
93 _LDLIBS-$(CONFIG_RTE_LIBRTE_NET) += -lrte_net
94 _LDLIBS-$(CONFIG_RTE_LIBRTE_ETHER) += -lrte_ethdev
95 _LDLIBS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += -lrte_cryptodev
96 _LDLIBS-$(CONFIG_RTE_LIBRTE_MEMPOOL) += -lrte_mempool
97 _LDLIBS-$(CONFIG_RTE_LIBRTE_RING) += -lrte_ring
98 _LDLIBS-$(CONFIG_RTE_LIBRTE_EAL) += -lrte_eal
99 _LDLIBS-$(CONFIG_RTE_LIBRTE_CMDLINE) += -lrte_cmdline
100 _LDLIBS-$(CONFIG_RTE_LIBRTE_REORDER) += -lrte_reorder
102 ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n)
103 # plugins (link only if static libraries)
104 _LDLIBS-$(CONFIG_RTE_DRIVER_MEMPOOL_RING) += -lrte_mempool_ring
105 _LDLIBS-$(CONFIG_RTE_DRIVER_MEMPOOL_STACK) += -lrte_mempool_stack
107 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AF_PACKET) += -lrte_pmd_af_packet
108 _LDLIBS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += -lrte_pmd_bnx2x -lz
109 _LDLIBS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += -lrte_pmd_bnxt
110 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_BOND) += -lrte_pmd_bond
111 _LDLIBS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += -lrte_pmd_cxgbe
112 _LDLIBS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += -lrte_pmd_e1000
113 _LDLIBS-$(CONFIG_RTE_LIBRTE_ENA_PMD) += -lrte_pmd_ena
114 _LDLIBS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += -lrte_pmd_enic
115 _LDLIBS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += -lrte_pmd_fm10k
116 _LDLIBS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += -lrte_pmd_i40e
117 _LDLIBS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += -lrte_pmd_ixgbe
118 _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += -lrte_pmd_mlx4 -libverbs
119 _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += -lrte_pmd_mlx5 -libverbs
120 _LDLIBS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += -lrte_pmd_nfp -lm
121 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL) += -lrte_pmd_null
122 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_PCAP) += -lrte_pmd_pcap -lpcap
123 _LDLIBS-$(CONFIG_RTE_LIBRTE_QEDE_PMD) += -lrte_pmd_qede
124 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_RING) += -lrte_pmd_ring
125 _LDLIBS-$(CONFIG_RTE_LIBRTE_SFC_EFX_PMD) += -lrte_pmd_sfc_efx
126 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SZEDATA2) += -lrte_pmd_szedata2 -lsze2
127 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_TAP) += -lrte_pmd_tap
128 _LDLIBS-$(CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD) += -lrte_pmd_thunderx_nicvf -lm
129 _LDLIBS-$(CONFIG_RTE_LIBRTE_VIRTIO_PMD) += -lrte_pmd_virtio
130 ifeq ($(CONFIG_RTE_LIBRTE_VHOST),y)
131 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_VHOST) += -lrte_pmd_vhost
132 endif # $(CONFIG_RTE_LIBRTE_VHOST)
133 _LDLIBS-$(CONFIG_RTE_LIBRTE_VMXNET3_PMD) += -lrte_pmd_vmxnet3_uio
134 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_XENVIRT) += -lrte_pmd_xenvirt -lxenstore
136 ifeq ($(CONFIG_RTE_LIBRTE_CRYPTODEV),y)
137 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += -lrte_pmd_aesni_mb
138 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += -L$(AESNI_MULTI_BUFFER_LIB_PATH) -lIPSec_MB
139 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_GCM) += -lrte_pmd_aesni_gcm -lisal_crypto
140 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_OPENSSL) += -lrte_pmd_openssl -lcrypto
141 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO) += -lrte_pmd_null_crypto
142 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += -lrte_pmd_qat -lcrypto
143 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G) += -lrte_pmd_snow3g
144 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G) += -L$(LIBSSO_SNOW3G_PATH)/build -lsso_snow3g
145 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_KASUMI) += -lrte_pmd_kasumi
146 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_KASUMI) += -L$(LIBSSO_KASUMI_PATH)/build -lsso_kasumi
147 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ZUC) += -lrte_pmd_zuc
148 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ZUC) += -L$(LIBSSO_ZUC_PATH)/build -lsso_zuc
149 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO) += -lrte_pmd_armv8
150 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO) += -L$(ARMV8_CRYPTO_LIB_PATH) -larmv8_crypto
151 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += -lrte_pmd_crypto_scheduler
152 endif # CONFIG_RTE_LIBRTE_CRYPTODEV
154 endif # !CONFIG_RTE_BUILD_SHARED_LIBS
156 _LDLIBS-y += --no-whole-archive
158 ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n)
159 # The static libraries do not know their dependencies.
160 # So linking with static library requires explicit dependencies.
161 _LDLIBS-$(CONFIG_RTE_LIBRTE_EAL) += -lrt
162 _LDLIBS-$(CONFIG_RTE_LIBRTE_SCHED) += -lm
163 _LDLIBS-$(CONFIG_RTE_LIBRTE_SCHED) += -lrt
164 _LDLIBS-$(CONFIG_RTE_LIBRTE_METER) += -lm
165 ifeq ($(CONFIG_RTE_LIBRTE_VHOST_NUMA),y)
166 _LDLIBS-$(CONFIG_RTE_LIBRTE_VHOST) += -lnuma
168 _LDLIBS-$(CONFIG_RTE_PORT_PCAP) += -lpcap
169 endif # !CONFIG_RTE_BUILD_SHARED_LIBS
171 _LDLIBS-y += $(EXECENV_LDLIBS)
173 LDLIBS += $(_LDLIBS-y) $(CPU_LDLIBS) $(EXTRA_LDLIBS)
175 # Eliminate duplicates without sorting
176 LDLIBS := $(shell echo $(LDLIBS) | \
177 awk '{for (i = 1; i <= NF; i++) { \
178 if ($$i !~ /^-l.*/ || !seen[$$i]++) print $$i }}')
180 ifeq ($(RTE_DEVEL_BUILD)$(CONFIG_RTE_BUILD_SHARED_LIB),yy)
181 LDFLAGS += -rpath=$(RTE_SDK_BIN)/lib
184 MAPFLAGS = -Map=$@.map --cref
190 install: build _postinstall
197 exe2cmd = $(strip $(call dotfile,$(patsubst %,%.cmd,$(1))))
199 ifeq ($(LINK_USING_CC),1)
200 O_TO_EXE = $(CC) -o $@ $(CFLAGS) $(OBJS-y) $(call linkerprefix, \
201 $(LDLIBS) $(LDFLAGS) $(LDFLAGS_$(@)) $(EXTRA_LDFLAGS) \
204 O_TO_EXE = $(LD) -o $@ $(OBJS-y) \
205 $(LDLIBS) $(LDFLAGS) $(LDFLAGS_$(@)) $(EXTRA_LDFLAGS) \
208 O_TO_EXE_STR = $(subst ','\'',$(O_TO_EXE)) #'# fix syntax highlight
209 O_TO_EXE_DISP = $(if $(V),"$(O_TO_EXE_STR)"," LD $(@)")
210 O_TO_EXE_CMD = "cmd_$@ = $(O_TO_EXE_STR)"
211 O_TO_EXE_DO = @set -e; \
212 echo $(O_TO_EXE_DISP); \
214 echo $(O_TO_EXE_CMD) > $(call exe2cmd,$(@))
218 # path where libraries are retrieved
219 LDLIBS_PATH := $(subst -Wl$(comma)-L,,$(filter -Wl$(comma)-L%,$(LDLIBS)))
220 LDLIBS_PATH += $(subst -L,,$(filter -L%,$(LDLIBS)))
222 # list of .a files that are linked to this application
223 LDLIBS_NAMES := $(patsubst -l%,lib%.a,$(filter -l%,$(LDLIBS)))
224 LDLIBS_NAMES += $(patsubst -Wl$(comma)-l%,lib%.a,$(filter -Wl$(comma)-l%,$(LDLIBS)))
226 # list of found libraries files (useful for deps). If not found, the
227 # library is silently ignored and dep won't be checked
228 LDLIBS_FILES := $(wildcard $(foreach dir,$(LDLIBS_PATH),\
229 $(addprefix $(dir)/,$(LDLIBS_NAMES))))
232 # Compile executable file if needed
234 $(APP): $(OBJS-y) $(LDLIBS_FILES) $(DEP_$(APP)) $(LDSCRIPT) FORCE
235 @[ -d $(dir $@) ] || mkdir -p $(dir $@)
237 @echo -n "$< -> $@ " ; \
238 echo -n "file_missing=$(call boolean,$(file_missing)) " ; \
239 echo -n "cmdline_changed=$(call boolean,$(call cmdline_changed,$(O_TO_EXE_STR))) " ; \
240 echo -n "depfile_missing=$(call boolean,$(depfile_missing)) " ; \
241 echo "depfile_newer=$(call boolean,$(depfile_newer)) ")
244 $(call cmdline_changed,$(O_TO_EXE_STR)),\
250 # install app in $(RTE_OUTPUT)/app
252 $(RTE_OUTPUT)/app/$(APP): $(APP)
253 @echo " INSTALL-APP $(APP)"
254 @[ -d $(RTE_OUTPUT)/app ] || mkdir -p $(RTE_OUTPUT)/app
255 $(Q)cp -f $(APP) $(RTE_OUTPUT)/app
258 # install app map file in $(RTE_OUTPUT)/app
260 $(RTE_OUTPUT)/app/$(APP).map: $(APP)
261 @echo " INSTALL-MAP $(APP).map"
262 @[ -d $(RTE_OUTPUT)/app ] || mkdir -p $(RTE_OUTPUT)/app
263 $(Q)cp -f $(APP).map $(RTE_OUTPUT)/app
266 # Clean all generated files
270 $(Q)rm -f $(_BUILD_TARGETS) $(_INSTALL_TARGETS) $(_CLEAN_TARGETS)
274 $(Q)rm -rf $(APP) $(OBJS-all) $(DEPS-all) $(DEPSTMP-all) \
275 $(CMDS-all) $(INSTALL-FILES-all) .$(APP).cmd $(APP).map
278 include $(RTE_SDK)/mk/internal/rte.compile-post.mk
279 include $(RTE_SDK)/mk/internal/rte.install-post.mk
280 include $(RTE_SDK)/mk/internal/rte.clean-post.mk
281 include $(RTE_SDK)/mk/internal/rte.build-post.mk
283 ifneq ($(wildcard $(RTE_SDK)/mk/target/$(RTE_TARGET)/rte.app.mk),)
284 include $(RTE_SDK)/mk/target/$(RTE_TARGET)/rte.app.mk
286 include $(RTE_SDK)/mk/target/generic/rte.app.mk