1 /* SPDX-License-Identifier: BSD-3-Clause
2 * Copyright(c) 2010-2017 Intel Corporation
14 #include <sys/types.h>
16 #include <sys/queue.h>
22 #include <arpa/inet.h>
24 #include <rte_common.h>
25 #include <rte_byteorder.h>
27 #include <rte_debug.h>
28 #include <rte_cycles.h>
29 #include <rte_memory.h>
30 #include <rte_launch.h>
32 #include <rte_per_lcore.h>
33 #include <rte_lcore.h>
34 #include <rte_atomic.h>
35 #include <rte_branch_prediction.h>
36 #include <rte_mempool.h>
37 #include <rte_interrupts.h>
39 #include <rte_ether.h>
40 #include <rte_ethdev.h>
41 #include <rte_string_fns.h>
43 #include <rte_eth_bond.h>
52 printf("usage: %s [EAL options] -- "
53 #ifdef RTE_LIB_CMDLINE
55 "[--cmdline-file=FILENAME] "
57 "[--help|-h] | [--auto-start|-a] | ["
58 "--tx-first | --stats-period=PERIOD | "
59 "--coremask=COREMASK --portmask=PORTMASK --numa "
60 "--portlist=PORTLIST "
61 "--mbuf-size= | --total-num-mbufs= | "
62 "--nb-cores= | --nb-ports= | "
63 #ifdef RTE_LIB_CMDLINE
64 "--eth-peers-configfile= | "
65 "--eth-peer=X,M:M:M:M:M:M | "
66 "--tx-ip=SRC,DST | --tx-udp=PORT | "
68 "--pkt-filter-mode= |"
69 "--rss-ip | --rss-udp | --rss-level-inner | --rss-level-outer |"
70 "--rxpt= | --rxht= | --rxwt= |"
71 " --rxfreet= | --txpt= | --txht= | --txwt= | --txfreet= | "
72 "--txrst= | --tx-offloads= | | --rx-offloads= | "
73 "--vxlan-gpe-port= | --geneve-parsed-port= | "
74 "--record-core-cycles | --record-burst-stats]\n",
76 #ifdef RTE_LIB_CMDLINE
77 printf(" --interactive: run in interactive mode.\n");
78 printf(" --cmdline-file: execute cli commands before startup.\n");
80 printf(" --auto-start: start forwarding on init "
81 "[always when non-interactive].\n");
82 printf(" --help: display this message and quit.\n");
83 printf(" --tx-first: start forwarding sending a burst first "
84 "(only if interactive is disabled).\n");
85 printf(" --stats-period=PERIOD: statistics will be shown "
86 "every PERIOD seconds (only if interactive is disabled).\n");
87 printf(" --nb-cores=N: set the number of forwarding cores "
88 "(1 <= N <= %d).\n", nb_lcores);
89 printf(" --nb-ports=N: set the number of forwarding ports "
90 "(1 <= N <= %d).\n", nb_ports);
91 printf(" --coremask=COREMASK: hexadecimal bitmask of cores running "
92 "the packet forwarding test. The main lcore is reserved for "
93 "command line parsing only, and cannot be masked on for "
94 "packet forwarding.\n");
95 printf(" --portmask=PORTMASK: hexadecimal bitmask of ports used "
96 "by the packet forwarding test.\n");
97 printf(" --portlist=PORTLIST: list of forwarding ports\n");
98 printf(" --numa: enable NUMA-aware allocation of RX/TX rings and of "
99 "RX memory buffers (mbufs).\n");
100 printf(" --port-numa-config=(port,socket)[,(port,socket)]: "
101 "specify the socket on which the memory pool "
102 "used by the port will be allocated.\n");
103 printf(" --ring-numa-config=(port,flag,socket)[,(port,flag,socket)]: "
104 "specify the socket on which the TX/RX rings for "
105 "the port will be allocated "
106 "(flag: 1 for RX; 2 for TX; 3 for RX and TX).\n");
107 printf(" --socket-num=N: set socket from which all memory is allocated "
109 printf(" --mbuf-size=N,[N1[,..Nn]: set the data size of mbuf to "
110 "N bytes. If multiple numbers are specified the extra pools "
111 "will be created to receive with packet split features\n");
112 printf(" --total-num-mbufs=N: set the number of mbufs to be allocated "
114 printf(" --max-pkt-len=N: set the maximum size of packet to N bytes.\n");
115 printf(" --max-lro-pkt-size=N: set the maximum LRO aggregated packet "
116 "size to N bytes.\n");
117 #ifdef RTE_LIB_CMDLINE
118 printf(" --eth-peers-configfile=name: config file with ethernet addresses "
120 printf(" --eth-peer=X,M:M:M:M:M:M: set the MAC address of the X peer "
121 "port (0 <= X < %d).\n", RTE_MAX_ETHPORTS);
123 printf(" --pkt-filter-mode=N: set Flow Director mode "
124 "(N: none (default mode) or signature or perfect).\n");
125 printf(" --pkt-filter-report-hash=N: set Flow Director report mode "
126 "(N: none or match (default) or always).\n");
127 printf(" --pkt-filter-size=N: set Flow Director mode "
128 "(N: 64K (default mode) or 128K or 256K).\n");
129 printf(" --pkt-filter-drop-queue=N: set drop-queue. "
130 "In perfect mode, when you add a rule with queue = -1 "
131 "the packet will be enqueued into the rx drop-queue. "
132 "If the drop-queue doesn't exist, the packet is dropped. "
133 "By default drop-queue=127.\n");
134 #ifdef RTE_LIB_LATENCYSTATS
135 printf(" --latencystats=N: enable latency and jitter statistcs "
136 "monitoring on forwarding lcore id N.\n");
138 printf(" --disable-crc-strip: disable CRC stripping by hardware.\n");
139 printf(" --enable-lro: enable large receive offload.\n");
140 printf(" --enable-rx-cksum: enable rx hardware checksum offload.\n");
141 printf(" --enable-rx-timestamp: enable rx hardware timestamp offload.\n");
142 printf(" --enable-hw-vlan: enable hardware vlan.\n");
143 printf(" --enable-hw-vlan-filter: enable hardware vlan filter.\n");
144 printf(" --enable-hw-vlan-strip: enable hardware vlan strip.\n");
145 printf(" --enable-hw-vlan-extend: enable hardware vlan extend.\n");
146 printf(" --enable-hw-qinq-strip: enable hardware qinq strip.\n");
147 printf(" --enable-drop-en: enable per queue packet drop.\n");
148 printf(" --disable-rss: disable rss.\n");
149 printf(" --port-topology=<paired|chained|loop>: set port topology (paired "
151 printf(" --forward-mode=N: set forwarding mode (N: %s).\n",
152 list_pkt_forwarding_modes());
153 printf(" --forward-mode=5tswap: set forwarding mode to "
154 "swap L2,L3,L4 for MAC, IPv4/IPv6 and TCP/UDP only.\n");
155 printf(" --rss-ip: set RSS functions to IPv4/IPv6 only .\n");
156 printf(" --rss-udp: set RSS functions to IPv4/IPv6 + UDP.\n");
157 printf(" --rss-level-inner: set RSS hash level to innermost\n");
158 printf(" --rss-level-outer: set RSS hash level to outermost\n");
159 printf(" --rxq=N: set the number of RX queues per port to N.\n");
160 printf(" --rxd=N: set the number of descriptors in RX rings to N.\n");
161 printf(" --txq=N: set the number of TX queues per port to N.\n");
162 printf(" --txd=N: set the number of descriptors in TX rings to N.\n");
163 printf(" --hairpinq=N: set the number of hairpin queues per port to "
165 printf(" --burst=N: set the number of packets per burst to N.\n");
166 printf(" --mbcache=N: set the cache of mbuf memory pool to N.\n");
167 printf(" --rxpt=N: set prefetch threshold register of RX rings to N.\n");
168 printf(" --rxht=N: set the host threshold register of RX rings to N.\n");
169 printf(" --rxfreet=N: set the free threshold of RX descriptors to N "
170 "(0 <= N < value of rxd).\n");
171 printf(" --rxwt=N: set the write-back threshold register of RX rings to N.\n");
172 printf(" --txpt=N: set the prefetch threshold register of TX rings to N.\n");
173 printf(" --txht=N: set the nhost threshold register of TX rings to N.\n");
174 printf(" --txwt=N: set the write-back threshold register of TX rings to N.\n");
175 printf(" --txfreet=N: set the transmit free threshold of TX rings to N "
176 "(0 <= N <= value of txd).\n");
177 printf(" --txrst=N: set the transmit RS bit threshold of TX rings to N "
178 "(0 <= N <= value of txd).\n");
179 printf(" --no-flush-rx: Don't flush RX streams before forwarding."
180 " Used mainly with PCAP drivers.\n");
181 printf(" --rxoffs=X[,Y]*: set RX segment offsets for split.\n");
182 printf(" --rxpkts=X[,Y]*: set RX segment sizes to split.\n");
183 printf(" --txpkts=X[,Y]*: set TX segment sizes"
184 " or total packet length.\n");
185 printf(" --txonly-multi-flow: generate multiple flows in txonly mode\n");
186 printf(" --disable-link-check: disable check on link status when "
187 "starting/stopping ports.\n");
188 printf(" --disable-device-start: do not automatically start port\n");
189 printf(" --no-lsc-interrupt: disable link status change interrupt.\n");
190 printf(" --no-rmv-interrupt: disable device removal interrupt.\n");
191 printf(" --bitrate-stats=N: set the logical core N to perform "
192 "bit-rate calculation.\n");
193 printf(" --print-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|flow_aged|all>: "
194 "enable print of designated event or all of them.\n");
195 printf(" --mask-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|flow_aged|all>: "
196 "disable print of designated event or all of them.\n");
197 printf(" --flow-isolate-all: "
198 "requests flow API isolated mode on all ports at initialization time.\n");
199 printf(" --tx-offloads=0xXXXXXXXX: hexadecimal bitmask of TX queue offloads\n");
200 printf(" --rx-offloads=0xXXXXXXXX: hexadecimal bitmask of RX queue offloads\n");
201 printf(" --hot-plug: enable hot plug for device.\n");
202 printf(" --vxlan-gpe-port=N: UPD port of tunnel VXLAN-GPE\n");
203 printf(" --geneve-parsed-port=N: UPD port to parse GENEVE tunnel protocol\n");
204 printf(" --mlockall: lock all memory\n");
205 printf(" --no-mlockall: do not lock all memory\n");
206 printf(" --mp-alloc <native|anon|xmem|xmemhuge>: mempool allocation method.\n"
207 " native: use regular DPDK memory to create and populate mempool\n"
208 " anon: use regular DPDK memory to create and anonymous memory to populate mempool\n"
209 " xmem: use anonymous memory to create and populate mempool\n"
210 " xmemhuge: use anonymous hugepage memory to create and populate mempool\n");
211 printf(" --noisy-tx-sw-buffer-size=N: size of FIFO buffer\n");
212 printf(" --noisy-tx-sw-buffer-flushtime=N: flush FIFO after N ms\n");
213 printf(" --noisy-lkup-memory=N: allocate N MB of VNF memory\n");
214 printf(" --noisy-lkup-num-writes=N: do N random writes per packet\n");
215 printf(" --noisy-lkup-num-reads=N: do N random reads per packet\n");
216 printf(" --noisy-lkup-num-writes=N: do N random reads and writes per packet\n");
217 printf(" --no-iova-contig: mempool memory can be IOVA non contiguous. "
218 "valid only with --mp-alloc=anon\n");
219 printf(" --rx-mq-mode=0xX: hexadecimal bitmask of RX mq mode can be "
221 printf(" --record-core-cycles: enable measurement of CPU cycles.\n");
222 printf(" --record-burst-stats: enable display of RX and TX bursts.\n");
223 printf(" --hairpin-mode=0xXX: bitmask set the hairpin port mode.\n "
224 " 0x10 - explicit Tx rule, 0x02 - hairpin ports paired\n"
225 " 0x01 - hairpin ports loop, 0x00 - hairpin port self\n");
228 #ifdef RTE_LIB_CMDLINE
230 init_peer_eth_addrs(char *config_filename)
236 config_file = fopen(config_filename, "r");
237 if (config_file == NULL) {
238 perror("Failed to open eth config file\n");
242 for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
244 if (fgets(buf, sizeof(buf), config_file) == NULL)
247 if (rte_ether_unformat_addr(buf, &peer_eth_addrs[i]) < 0) {
248 printf("Bad MAC address format on line %d\n", i+1);
254 nb_peer_eth_addrs = (portid_t) i;
260 * Parse the coremask given as argument (hexadecimal string) and set
261 * the global configuration of forwarding cores.
264 parse_fwd_coremask(const char *coremask)
267 unsigned long long int cm;
269 /* parse hexadecimal string */
271 cm = strtoull(coremask, &end, 16);
272 if ((coremask[0] == '\0') || (end == NULL) || (*end != '\0'))
273 rte_exit(EXIT_FAILURE, "Invalid fwd core mask\n");
274 else if (set_fwd_lcores_mask((uint64_t) cm) < 0)
275 rte_exit(EXIT_FAILURE, "coremask is not valid\n");
279 * Parse the coremask given as argument (hexadecimal string) and set
280 * the global configuration of forwarding cores.
283 parse_fwd_portmask(const char *portmask)
286 unsigned long long int pm;
288 /* parse hexadecimal string */
290 pm = strtoull(portmask, &end, 16);
291 if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
292 rte_exit(EXIT_FAILURE, "Invalid fwd port mask\n");
294 set_fwd_ports_mask((uint64_t) pm);
298 print_invalid_socket_id_error(void)
302 printf("Invalid socket id, options are: ");
303 for (i = 0; i < num_sockets; i++) {
304 printf("%u%s", socket_ids[i],
305 (i == num_sockets - 1) ? "\n" : ",");
310 parse_portnuma_config(const char *q_arg)
313 const char *p, *p0 = q_arg;
315 uint8_t i, socket_id;
323 unsigned long int_fld[_NUM_FLD];
324 char *str_fld[_NUM_FLD];
326 /* reset from value set at definition */
327 while ((p = strchr(p0,'(')) != NULL) {
329 if((p0 = strchr(p,')')) == NULL)
333 if(size >= sizeof(s))
336 snprintf(s, sizeof(s), "%.*s", size, p);
337 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
339 for (i = 0; i < _NUM_FLD; i++) {
341 int_fld[i] = strtoul(str_fld[i], &end, 0);
342 if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
345 port_id = (portid_t)int_fld[FLD_PORT];
346 if (port_id_is_invalid(port_id, ENABLED_WARN) ||
347 port_id == (portid_t)RTE_PORT_ALL) {
351 socket_id = (uint8_t)int_fld[FLD_SOCKET];
352 if (new_socket_id(socket_id)) {
353 if (num_sockets >= RTE_MAX_NUMA_NODES) {
354 print_invalid_socket_id_error();
357 socket_ids[num_sockets++] = socket_id;
359 port_numa[port_id] = socket_id;
366 parse_ringnuma_config(const char *q_arg)
369 const char *p, *p0 = q_arg;
371 uint8_t i, ring_flag, socket_id;
380 unsigned long int_fld[_NUM_FLD];
381 char *str_fld[_NUM_FLD];
382 #define RX_RING_ONLY 0x1
383 #define TX_RING_ONLY 0x2
384 #define RXTX_RING 0x3
386 /* reset from value set at definition */
387 while ((p = strchr(p0,'(')) != NULL) {
389 if((p0 = strchr(p,')')) == NULL)
393 if(size >= sizeof(s))
396 snprintf(s, sizeof(s), "%.*s", size, p);
397 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
399 for (i = 0; i < _NUM_FLD; i++) {
401 int_fld[i] = strtoul(str_fld[i], &end, 0);
402 if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
405 port_id = (portid_t)int_fld[FLD_PORT];
406 if (port_id_is_invalid(port_id, ENABLED_WARN) ||
407 port_id == (portid_t)RTE_PORT_ALL) {
411 socket_id = (uint8_t)int_fld[FLD_SOCKET];
412 if (new_socket_id(socket_id)) {
413 if (num_sockets >= RTE_MAX_NUMA_NODES) {
414 print_invalid_socket_id_error();
417 socket_ids[num_sockets++] = socket_id;
419 ring_flag = (uint8_t)int_fld[FLD_FLAG];
420 if ((ring_flag < RX_RING_ONLY) || (ring_flag > RXTX_RING)) {
421 printf("Invalid ring-flag=%d config for port =%d\n",
426 switch (ring_flag & RXTX_RING) {
428 rxring_numa[port_id] = socket_id;
431 txring_numa[port_id] = socket_id;
434 rxring_numa[port_id] = socket_id;
435 txring_numa[port_id] = socket_id;
438 printf("Invalid ring-flag=%d config for port=%d\n",
448 parse_event_printing_config(const char *optarg, int enable)
452 if (!strcmp(optarg, "unknown"))
453 mask = UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN;
454 else if (!strcmp(optarg, "intr_lsc"))
455 mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC;
456 else if (!strcmp(optarg, "queue_state"))
457 mask = UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE;
458 else if (!strcmp(optarg, "intr_reset"))
459 mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET;
460 else if (!strcmp(optarg, "vf_mbox"))
461 mask = UINT32_C(1) << RTE_ETH_EVENT_VF_MBOX;
462 else if (!strcmp(optarg, "ipsec"))
463 mask = UINT32_C(1) << RTE_ETH_EVENT_IPSEC;
464 else if (!strcmp(optarg, "macsec"))
465 mask = UINT32_C(1) << RTE_ETH_EVENT_MACSEC;
466 else if (!strcmp(optarg, "intr_rmv"))
467 mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV;
468 else if (!strcmp(optarg, "dev_probed"))
469 mask = UINT32_C(1) << RTE_ETH_EVENT_NEW;
470 else if (!strcmp(optarg, "dev_released"))
471 mask = UINT32_C(1) << RTE_ETH_EVENT_DESTROY;
472 else if (!strcmp(optarg, "flow_aged"))
473 mask = UINT32_C(1) << RTE_ETH_EVENT_FLOW_AGED;
474 else if (!strcmp(optarg, "all"))
477 fprintf(stderr, "Invalid event: %s\n", optarg);
481 event_print_mask |= mask;
483 event_print_mask &= ~mask;
488 launch_args_parse(int argc, char** argv)
495 /* Default offloads for all ports. */
496 uint64_t rx_offloads = rx_mode.offloads;
497 uint64_t tx_offloads = tx_mode.offloads;
498 struct rte_eth_dev_info dev_info;
499 uint16_t rec_nb_pkts;
502 static struct option lgopts[] = {
504 #ifdef RTE_LIB_CMDLINE
505 { "interactive", 0, 0, 0 },
506 { "cmdline-file", 1, 0, 0 },
507 { "auto-start", 0, 0, 0 },
508 { "eth-peers-configfile", 1, 0, 0 },
509 { "eth-peer", 1, 0, 0 },
511 { "tx-first", 0, 0, 0 },
512 { "stats-period", 1, 0, 0 },
513 { "ports", 1, 0, 0 },
514 { "nb-cores", 1, 0, 0 },
515 { "nb-ports", 1, 0, 0 },
516 { "coremask", 1, 0, 0 },
517 { "portmask", 1, 0, 0 },
518 { "portlist", 1, 0, 0 },
520 { "no-numa", 0, 0, 0 },
521 { "mp-anon", 0, 0, 0 },
522 { "port-numa-config", 1, 0, 0 },
523 { "ring-numa-config", 1, 0, 0 },
524 { "socket-num", 1, 0, 0 },
525 { "mbuf-size", 1, 0, 0 },
526 { "total-num-mbufs", 1, 0, 0 },
527 { "max-pkt-len", 1, 0, 0 },
528 { "max-lro-pkt-size", 1, 0, 0 },
529 { "pkt-filter-mode", 1, 0, 0 },
530 { "pkt-filter-report-hash", 1, 0, 0 },
531 { "pkt-filter-size", 1, 0, 0 },
532 { "pkt-filter-drop-queue", 1, 0, 0 },
533 #ifdef RTE_LIB_LATENCYSTATS
534 { "latencystats", 1, 0, 0 },
536 #ifdef RTE_LIB_BITRATESTATS
537 { "bitrate-stats", 1, 0, 0 },
539 { "disable-crc-strip", 0, 0, 0 },
540 { "enable-lro", 0, 0, 0 },
541 { "enable-rx-cksum", 0, 0, 0 },
542 { "enable-rx-timestamp", 0, 0, 0 },
543 { "enable-scatter", 0, 0, 0 },
544 { "enable-hw-vlan", 0, 0, 0 },
545 { "enable-hw-vlan-filter", 0, 0, 0 },
546 { "enable-hw-vlan-strip", 0, 0, 0 },
547 { "enable-hw-vlan-extend", 0, 0, 0 },
548 { "enable-hw-qinq-strip", 0, 0, 0 },
549 { "enable-drop-en", 0, 0, 0 },
550 { "disable-rss", 0, 0, 0 },
551 { "port-topology", 1, 0, 0 },
552 { "forward-mode", 1, 0, 0 },
553 { "rss-ip", 0, 0, 0 },
554 { "rss-udp", 0, 0, 0 },
555 { "rss-level-outer", 0, 0, 0 },
556 { "rss-level-inner", 0, 0, 0 },
561 { "hairpinq", 1, 0, 0 },
562 { "hairpin-mode", 1, 0, 0 },
563 { "burst", 1, 0, 0 },
564 { "mbcache", 1, 0, 0 },
568 { "txfreet", 1, 0, 0 },
569 { "txrst", 1, 0, 0 },
573 { "rxfreet", 1, 0, 0 },
574 { "no-flush-rx", 0, 0, 0 },
575 { "flow-isolate-all", 0, 0, 0 },
576 { "rxoffs", 1, 0, 0 },
577 { "rxpkts", 1, 0, 0 },
578 { "txpkts", 1, 0, 0 },
579 { "txonly-multi-flow", 0, 0, 0 },
580 { "disable-link-check", 0, 0, 0 },
581 { "disable-device-start", 0, 0, 0 },
582 { "no-lsc-interrupt", 0, 0, 0 },
583 { "no-rmv-interrupt", 0, 0, 0 },
584 { "print-event", 1, 0, 0 },
585 { "mask-event", 1, 0, 0 },
586 { "tx-offloads", 1, 0, 0 },
587 { "rx-offloads", 1, 0, 0 },
588 { "hot-plug", 0, 0, 0 },
589 { "vxlan-gpe-port", 1, 0, 0 },
590 { "geneve-parsed-port", 1, 0, 0 },
591 { "mlockall", 0, 0, 0 },
592 { "no-mlockall", 0, 0, 0 },
593 { "mp-alloc", 1, 0, 0 },
594 { "tx-ip", 1, 0, 0 },
595 { "tx-udp", 1, 0, 0 },
596 { "noisy-tx-sw-buffer-size", 1, 0, 0 },
597 { "noisy-tx-sw-buffer-flushtime", 1, 0, 0 },
598 { "noisy-lkup-memory", 1, 0, 0 },
599 { "noisy-lkup-num-writes", 1, 0, 0 },
600 { "noisy-lkup-num-reads", 1, 0, 0 },
601 { "noisy-lkup-num-reads-writes", 1, 0, 0 },
602 { "no-iova-contig", 0, 0, 0 },
603 { "rx-mq-mode", 1, 0, 0 },
604 { "record-core-cycles", 0, 0, 0 },
605 { "record-burst-stats", 0, 0, 0 },
611 #ifdef RTE_LIB_CMDLINE
612 #define SHORTOPTS "i"
616 while ((opt = getopt_long(argc, argvopt, SHORTOPTS "ah",
617 lgopts, &opt_idx)) != EOF) {
619 #ifdef RTE_LIB_CMDLINE
621 printf("Interactive-mode selected\n");
626 printf("Auto-start selected\n");
630 case 0: /*long options */
631 if (!strcmp(lgopts[opt_idx].name, "help")) {
633 rte_exit(EXIT_SUCCESS, "Displayed help\n");
635 #ifdef RTE_LIB_CMDLINE
636 if (!strcmp(lgopts[opt_idx].name, "interactive")) {
637 printf("Interactive-mode selected\n");
640 if (!strcmp(lgopts[opt_idx].name, "cmdline-file")) {
641 printf("CLI commands to be read from %s\n",
643 strlcpy(cmdline_filename, optarg,
644 sizeof(cmdline_filename));
646 if (!strcmp(lgopts[opt_idx].name, "auto-start")) {
647 printf("Auto-start selected\n");
650 if (!strcmp(lgopts[opt_idx].name, "tx-first")) {
651 printf("Ports to start sending a burst of "
655 if (!strcmp(lgopts[opt_idx].name, "stats-period")) {
659 n = strtoul(optarg, &end, 10);
660 if ((optarg[0] == '\0') || (end == NULL) ||
667 if (!strcmp(lgopts[opt_idx].name,
668 "eth-peers-configfile")) {
669 if (init_peer_eth_addrs(optarg) != 0)
670 rte_exit(EXIT_FAILURE,
671 "Cannot open logfile\n");
673 if (!strcmp(lgopts[opt_idx].name, "eth-peer")) {
677 n = strtoul(optarg, &port_end, 10);
678 if (errno != 0 || port_end == optarg || *port_end++ != ',')
679 rte_exit(EXIT_FAILURE,
680 "Invalid eth-peer: %s", optarg);
681 if (n >= RTE_MAX_ETHPORTS)
682 rte_exit(EXIT_FAILURE,
683 "eth-peer: port %d >= RTE_MAX_ETHPORTS(%d)\n",
684 n, RTE_MAX_ETHPORTS);
686 if (rte_ether_unformat_addr(port_end,
687 &peer_eth_addrs[n]) < 0)
688 rte_exit(EXIT_FAILURE,
689 "Invalid ethernet address: %s\n",
694 if (!strcmp(lgopts[opt_idx].name, "tx-ip")) {
698 end = strchr(optarg, ',');
699 if (end == optarg || !end)
700 rte_exit(EXIT_FAILURE,
701 "Invalid tx-ip: %s", optarg);
704 if (inet_aton(optarg, &in) == 0)
705 rte_exit(EXIT_FAILURE,
706 "Invalid source IP address: %s\n",
708 tx_ip_src_addr = rte_be_to_cpu_32(in.s_addr);
710 if (inet_aton(end, &in) == 0)
711 rte_exit(EXIT_FAILURE,
712 "Invalid destination IP address: %s\n",
714 tx_ip_dst_addr = rte_be_to_cpu_32(in.s_addr);
716 if (!strcmp(lgopts[opt_idx].name, "tx-udp")) {
720 n = strtoul(optarg, &end, 10);
721 if (errno != 0 || end == optarg ||
723 !(*end == '\0' || *end == ','))
724 rte_exit(EXIT_FAILURE,
725 "Invalid UDP port: %s\n",
731 n = strtoul(dst, &end, 10);
732 if (errno != 0 || end == dst ||
733 n > UINT16_MAX || *end)
734 rte_exit(EXIT_FAILURE,
735 "Invalid destination UDP port: %s\n",
743 if (!strcmp(lgopts[opt_idx].name, "nb-ports")) {
745 if (n > 0 && n <= nb_ports)
748 rte_exit(EXIT_FAILURE,
749 "Invalid port %d\n", n);
751 if (!strcmp(lgopts[opt_idx].name, "nb-cores")) {
753 if (n > 0 && n <= nb_lcores)
754 nb_fwd_lcores = (uint8_t) n;
756 rte_exit(EXIT_FAILURE,
757 "nb-cores should be > 0 and <= %d\n",
760 if (!strcmp(lgopts[opt_idx].name, "coremask"))
761 parse_fwd_coremask(optarg);
762 if (!strcmp(lgopts[opt_idx].name, "portmask"))
763 parse_fwd_portmask(optarg);
764 if (!strcmp(lgopts[opt_idx].name, "portlist"))
765 parse_fwd_portlist(optarg);
766 if (!strcmp(lgopts[opt_idx].name, "no-numa"))
768 if (!strcmp(lgopts[opt_idx].name, "numa"))
770 if (!strcmp(lgopts[opt_idx].name, "mp-anon")) {
771 mp_alloc_type = MP_ALLOC_ANON;
773 if (!strcmp(lgopts[opt_idx].name, "mp-alloc")) {
774 if (!strcmp(optarg, "native"))
775 mp_alloc_type = MP_ALLOC_NATIVE;
776 else if (!strcmp(optarg, "anon"))
777 mp_alloc_type = MP_ALLOC_ANON;
778 else if (!strcmp(optarg, "xmem"))
779 mp_alloc_type = MP_ALLOC_XMEM;
780 else if (!strcmp(optarg, "xmemhuge"))
781 mp_alloc_type = MP_ALLOC_XMEM_HUGE;
782 else if (!strcmp(optarg, "xbuf"))
783 mp_alloc_type = MP_ALLOC_XBUF;
785 rte_exit(EXIT_FAILURE,
786 "mp-alloc %s invalid - must be: "
787 "native, anon, xmem or xmemhuge\n",
790 if (!strcmp(lgopts[opt_idx].name, "port-numa-config")) {
791 if (parse_portnuma_config(optarg))
792 rte_exit(EXIT_FAILURE,
793 "invalid port-numa configuration\n");
795 if (!strcmp(lgopts[opt_idx].name, "ring-numa-config"))
796 if (parse_ringnuma_config(optarg))
797 rte_exit(EXIT_FAILURE,
798 "invalid ring-numa configuration\n");
799 if (!strcmp(lgopts[opt_idx].name, "socket-num")) {
801 if (!new_socket_id((uint8_t)n)) {
802 socket_num = (uint8_t)n;
804 print_invalid_socket_id_error();
805 rte_exit(EXIT_FAILURE,
806 "Invalid socket id");
809 if (!strcmp(lgopts[opt_idx].name, "mbuf-size")) {
810 unsigned int mb_sz[MAX_SEGS_BUFFER_SPLIT];
811 unsigned int nb_segs, i;
813 nb_segs = parse_item_list(optarg, "mbuf-size",
814 MAX_SEGS_BUFFER_SPLIT, mb_sz, 0);
816 rte_exit(EXIT_FAILURE,
818 for (i = 0; i < nb_segs; i++) {
819 if (mb_sz[i] <= 0 || mb_sz[i] > 0xFFFF)
820 rte_exit(EXIT_FAILURE,
821 "mbuf-size should be "
822 "> 0 and < 65536\n");
823 mbuf_data_size[i] = (uint16_t) mb_sz[i];
825 mbuf_data_size_n = nb_segs;
827 if (!strcmp(lgopts[opt_idx].name, "total-num-mbufs")) {
830 param_total_num_mbufs = (unsigned)n;
832 rte_exit(EXIT_FAILURE,
833 "total-num-mbufs should be > 1024\n");
835 if (!strcmp(lgopts[opt_idx].name, "max-pkt-len")) {
837 if (n >= RTE_ETHER_MIN_LEN)
838 rx_mode.max_rx_pkt_len = (uint32_t) n;
840 rte_exit(EXIT_FAILURE,
841 "Invalid max-pkt-len=%d - should be > %d\n",
842 n, RTE_ETHER_MIN_LEN);
844 if (!strcmp(lgopts[opt_idx].name, "max-lro-pkt-size")) {
846 rx_mode.max_lro_pkt_size = (uint32_t) n;
848 if (!strcmp(lgopts[opt_idx].name, "pkt-filter-mode")) {
849 if (!strcmp(optarg, "signature"))
851 RTE_FDIR_MODE_SIGNATURE;
852 else if (!strcmp(optarg, "perfect"))
853 fdir_conf.mode = RTE_FDIR_MODE_PERFECT;
854 else if (!strcmp(optarg, "perfect-mac-vlan"))
855 fdir_conf.mode = RTE_FDIR_MODE_PERFECT_MAC_VLAN;
856 else if (!strcmp(optarg, "perfect-tunnel"))
857 fdir_conf.mode = RTE_FDIR_MODE_PERFECT_TUNNEL;
858 else if (!strcmp(optarg, "none"))
859 fdir_conf.mode = RTE_FDIR_MODE_NONE;
861 rte_exit(EXIT_FAILURE,
862 "pkt-mode-invalid %s invalid - must be: "
863 "none, signature, perfect, perfect-mac-vlan"
864 " or perfect-tunnel\n",
867 if (!strcmp(lgopts[opt_idx].name,
868 "pkt-filter-report-hash")) {
869 if (!strcmp(optarg, "none"))
871 RTE_FDIR_NO_REPORT_STATUS;
872 else if (!strcmp(optarg, "match"))
874 RTE_FDIR_REPORT_STATUS;
875 else if (!strcmp(optarg, "always"))
877 RTE_FDIR_REPORT_STATUS_ALWAYS;
879 rte_exit(EXIT_FAILURE,
880 "pkt-filter-report-hash %s invalid "
881 "- must be: none or match or always\n",
884 if (!strcmp(lgopts[opt_idx].name, "pkt-filter-size")) {
885 if (!strcmp(optarg, "64K"))
887 RTE_FDIR_PBALLOC_64K;
888 else if (!strcmp(optarg, "128K"))
890 RTE_FDIR_PBALLOC_128K;
891 else if (!strcmp(optarg, "256K"))
893 RTE_FDIR_PBALLOC_256K;
895 rte_exit(EXIT_FAILURE, "pkt-filter-size %s invalid -"
896 " must be: 64K or 128K or 256K\n",
899 if (!strcmp(lgopts[opt_idx].name,
900 "pkt-filter-drop-queue")) {
903 fdir_conf.drop_queue = (uint8_t) n;
905 rte_exit(EXIT_FAILURE,
906 "drop queue %d invalid - must"
909 #ifdef RTE_LIB_LATENCYSTATS
910 if (!strcmp(lgopts[opt_idx].name,
914 latencystats_lcore_id = (lcoreid_t) n;
915 latencystats_enabled = 1;
917 rte_exit(EXIT_FAILURE,
918 "invalid lcore id %d for latencystats"
919 " must be >= 0\n", n);
922 #ifdef RTE_LIB_BITRATESTATS
923 if (!strcmp(lgopts[opt_idx].name, "bitrate-stats")) {
926 bitrate_lcore_id = (lcoreid_t) n;
929 rte_exit(EXIT_FAILURE,
930 "invalid lcore id %d for bitrate stats"
931 " must be >= 0\n", n);
934 if (!strcmp(lgopts[opt_idx].name, "disable-crc-strip"))
935 rx_offloads |= DEV_RX_OFFLOAD_KEEP_CRC;
936 if (!strcmp(lgopts[opt_idx].name, "enable-lro"))
937 rx_offloads |= DEV_RX_OFFLOAD_TCP_LRO;
938 if (!strcmp(lgopts[opt_idx].name, "enable-scatter"))
939 rx_offloads |= DEV_RX_OFFLOAD_SCATTER;
940 if (!strcmp(lgopts[opt_idx].name, "enable-rx-cksum"))
941 rx_offloads |= DEV_RX_OFFLOAD_CHECKSUM;
942 if (!strcmp(lgopts[opt_idx].name,
943 "enable-rx-timestamp"))
944 rx_offloads |= DEV_RX_OFFLOAD_TIMESTAMP;
945 if (!strcmp(lgopts[opt_idx].name, "enable-hw-vlan"))
946 rx_offloads |= DEV_RX_OFFLOAD_VLAN;
948 if (!strcmp(lgopts[opt_idx].name,
949 "enable-hw-vlan-filter"))
950 rx_offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
952 if (!strcmp(lgopts[opt_idx].name,
953 "enable-hw-vlan-strip"))
954 rx_offloads |= DEV_RX_OFFLOAD_VLAN_STRIP;
956 if (!strcmp(lgopts[opt_idx].name,
957 "enable-hw-vlan-extend"))
958 rx_offloads |= DEV_RX_OFFLOAD_VLAN_EXTEND;
960 if (!strcmp(lgopts[opt_idx].name,
961 "enable-hw-qinq-strip"))
962 rx_offloads |= DEV_RX_OFFLOAD_QINQ_STRIP;
964 if (!strcmp(lgopts[opt_idx].name, "enable-drop-en"))
967 if (!strcmp(lgopts[opt_idx].name, "disable-rss"))
969 if (!strcmp(lgopts[opt_idx].name, "port-topology")) {
970 if (!strcmp(optarg, "paired"))
971 port_topology = PORT_TOPOLOGY_PAIRED;
972 else if (!strcmp(optarg, "chained"))
973 port_topology = PORT_TOPOLOGY_CHAINED;
974 else if (!strcmp(optarg, "loop"))
975 port_topology = PORT_TOPOLOGY_LOOP;
977 rte_exit(EXIT_FAILURE, "port-topology %s invalid -"
978 " must be: paired, chained or loop\n",
981 if (!strcmp(lgopts[opt_idx].name, "forward-mode"))
982 set_pkt_forwarding_mode(optarg);
983 if (!strcmp(lgopts[opt_idx].name, "rss-ip"))
985 if (!strcmp(lgopts[opt_idx].name, "rss-udp"))
986 rss_hf = ETH_RSS_UDP;
987 if (!strcmp(lgopts[opt_idx].name, "rss-level-inner"))
988 rss_hf |= ETH_RSS_LEVEL_INNERMOST;
989 if (!strcmp(lgopts[opt_idx].name, "rss-level-outer"))
990 rss_hf |= ETH_RSS_LEVEL_OUTERMOST;
991 if (!strcmp(lgopts[opt_idx].name, "rxq")) {
993 if (n >= 0 && check_nb_rxq((queueid_t)n) == 0)
994 nb_rxq = (queueid_t) n;
996 rte_exit(EXIT_FAILURE, "rxq %d invalid - must be"
997 " >= 0 && <= %u\n", n,
998 get_allowed_max_nb_rxq(&pid));
1000 if (!strcmp(lgopts[opt_idx].name, "txq")) {
1002 if (n >= 0 && check_nb_txq((queueid_t)n) == 0)
1003 nb_txq = (queueid_t) n;
1005 rte_exit(EXIT_FAILURE, "txq %d invalid - must be"
1006 " >= 0 && <= %u\n", n,
1007 get_allowed_max_nb_txq(&pid));
1009 if (!strcmp(lgopts[opt_idx].name, "hairpinq")) {
1012 check_nb_hairpinq((queueid_t)n) == 0)
1013 nb_hairpinq = (queueid_t) n;
1015 rte_exit(EXIT_FAILURE, "txq %d invalid - must be"
1016 " >= 0 && <= %u\n", n,
1017 get_allowed_max_nb_hairpinq
1019 if ((n + nb_txq) < 0 ||
1020 check_nb_txq((queueid_t)(n + nb_txq)) != 0)
1021 rte_exit(EXIT_FAILURE, "txq + hairpinq "
1022 "%d invalid - must be"
1025 get_allowed_max_nb_txq(&pid));
1026 if ((n + nb_rxq) < 0 ||
1027 check_nb_rxq((queueid_t)(n + nb_rxq)) != 0)
1028 rte_exit(EXIT_FAILURE, "rxq + hairpinq "
1029 "%d invalid - must be"
1032 get_allowed_max_nb_rxq(&pid));
1034 if (!nb_rxq && !nb_txq) {
1035 rte_exit(EXIT_FAILURE, "Either rx or tx queues should "
1038 if (!strcmp(lgopts[opt_idx].name, "hairpin-mode")) {
1043 n = strtoul(optarg, &end, 0);
1044 if (errno != 0 || end == optarg)
1045 rte_exit(EXIT_FAILURE, "hairpin mode invalid\n");
1047 hairpin_mode = (uint16_t)n;
1049 if (!strcmp(lgopts[opt_idx].name, "burst")) {
1052 /* A burst size of zero means that the
1053 * PMD should be queried for
1054 * recommended Rx burst size. Since
1055 * testpmd uses a single size for all
1056 * ports, port 0 is queried for the
1057 * value, on the assumption that all
1058 * ports are of the same NIC model.
1060 ret = eth_dev_info_get_print_err(
1066 rec_nb_pkts = dev_info
1067 .default_rxportconf.burst_size;
1069 if (rec_nb_pkts == 0)
1070 rte_exit(EXIT_FAILURE,
1071 "PMD does not recommend a burst size. "
1072 "Provided value must be between "
1073 "1 and %d\n", MAX_PKT_BURST);
1074 else if (rec_nb_pkts > MAX_PKT_BURST)
1075 rte_exit(EXIT_FAILURE,
1076 "PMD recommended burst size of %d"
1077 " exceeds maximum value of %d\n",
1078 rec_nb_pkts, MAX_PKT_BURST);
1079 printf("Using PMD-provided burst value of %d\n",
1081 nb_pkt_per_burst = rec_nb_pkts;
1082 } else if (n > MAX_PKT_BURST)
1083 rte_exit(EXIT_FAILURE,
1084 "burst must be between1 and %d\n",
1087 nb_pkt_per_burst = (uint16_t) n;
1089 if (!strcmp(lgopts[opt_idx].name, "mbcache")) {
1092 (n <= RTE_MEMPOOL_CACHE_MAX_SIZE))
1093 mb_mempool_cache = (uint16_t) n;
1095 rte_exit(EXIT_FAILURE,
1096 "mbcache must be >= 0 and <= %d\n",
1097 RTE_MEMPOOL_CACHE_MAX_SIZE);
1099 if (!strcmp(lgopts[opt_idx].name, "txfreet")) {
1102 tx_free_thresh = (int16_t)n;
1104 rte_exit(EXIT_FAILURE, "txfreet must be >= 0\n");
1106 if (!strcmp(lgopts[opt_idx].name, "txrst")) {
1109 tx_rs_thresh = (int16_t)n;
1111 rte_exit(EXIT_FAILURE, "txrst must be >= 0\n");
1113 if (!strcmp(lgopts[opt_idx].name, "rxd")) {
1116 if (rx_free_thresh >= n)
1117 rte_exit(EXIT_FAILURE,
1119 "rx_free_thresh(%d)\n",
1120 (int)rx_free_thresh);
1122 nb_rxd = (uint16_t) n;
1124 rte_exit(EXIT_FAILURE,
1125 "rxd(%d) invalid - must be > 0\n",
1128 if (!strcmp(lgopts[opt_idx].name, "txd")) {
1131 nb_txd = (uint16_t) n;
1133 rte_exit(EXIT_FAILURE, "txd must be in > 0\n");
1135 if (!strcmp(lgopts[opt_idx].name, "txpt")) {
1138 tx_pthresh = (int8_t)n;
1140 rte_exit(EXIT_FAILURE, "txpt must be >= 0\n");
1142 if (!strcmp(lgopts[opt_idx].name, "txht")) {
1145 tx_hthresh = (int8_t)n;
1147 rte_exit(EXIT_FAILURE, "txht must be >= 0\n");
1149 if (!strcmp(lgopts[opt_idx].name, "txwt")) {
1152 tx_wthresh = (int8_t)n;
1154 rte_exit(EXIT_FAILURE, "txwt must be >= 0\n");
1156 if (!strcmp(lgopts[opt_idx].name, "rxpt")) {
1159 rx_pthresh = (int8_t)n;
1161 rte_exit(EXIT_FAILURE, "rxpt must be >= 0\n");
1163 if (!strcmp(lgopts[opt_idx].name, "rxht")) {
1166 rx_hthresh = (int8_t)n;
1168 rte_exit(EXIT_FAILURE, "rxht must be >= 0\n");
1170 if (!strcmp(lgopts[opt_idx].name, "rxwt")) {
1173 rx_wthresh = (int8_t)n;
1175 rte_exit(EXIT_FAILURE, "rxwt must be >= 0\n");
1177 if (!strcmp(lgopts[opt_idx].name, "rxfreet")) {
1180 rx_free_thresh = (int16_t)n;
1182 rte_exit(EXIT_FAILURE, "rxfreet must be >= 0\n");
1184 if (!strcmp(lgopts[opt_idx].name, "rxoffs")) {
1185 unsigned int seg_off[MAX_SEGS_BUFFER_SPLIT];
1186 unsigned int nb_offs;
1188 nb_offs = parse_item_list
1189 (optarg, "rxpkt offsets",
1190 MAX_SEGS_BUFFER_SPLIT,
1193 set_rx_pkt_offsets(seg_off, nb_offs);
1195 rte_exit(EXIT_FAILURE, "bad rxoffs\n");
1197 if (!strcmp(lgopts[opt_idx].name, "rxpkts")) {
1198 unsigned int seg_len[MAX_SEGS_BUFFER_SPLIT];
1199 unsigned int nb_segs;
1201 nb_segs = parse_item_list
1202 (optarg, "rxpkt segments",
1203 MAX_SEGS_BUFFER_SPLIT,
1206 set_rx_pkt_segments(seg_len, nb_segs);
1208 rte_exit(EXIT_FAILURE, "bad rxpkts\n");
1210 if (!strcmp(lgopts[opt_idx].name, "txpkts")) {
1211 unsigned seg_lengths[RTE_MAX_SEGS_PER_PKT];
1212 unsigned int nb_segs;
1214 nb_segs = parse_item_list(optarg, "txpkt segments",
1215 RTE_MAX_SEGS_PER_PKT, seg_lengths, 0);
1217 set_tx_pkt_segments(seg_lengths, nb_segs);
1219 rte_exit(EXIT_FAILURE, "bad txpkts\n");
1221 if (!strcmp(lgopts[opt_idx].name, "txonly-multi-flow"))
1222 txonly_multi_flow = 1;
1223 if (!strcmp(lgopts[opt_idx].name, "no-flush-rx"))
1225 if (!strcmp(lgopts[opt_idx].name, "disable-link-check"))
1227 if (!strcmp(lgopts[opt_idx].name, "disable-device-start"))
1228 no_device_start = 1;
1229 if (!strcmp(lgopts[opt_idx].name, "no-lsc-interrupt"))
1231 if (!strcmp(lgopts[opt_idx].name, "no-rmv-interrupt"))
1233 if (!strcmp(lgopts[opt_idx].name, "flow-isolate-all"))
1234 flow_isolate_all = 1;
1235 if (!strcmp(lgopts[opt_idx].name, "tx-offloads")) {
1237 n = strtoull(optarg, &end, 16);
1239 tx_offloads = (uint64_t)n;
1241 rte_exit(EXIT_FAILURE,
1242 "tx-offloads must be >= 0\n");
1245 if (!strcmp(lgopts[opt_idx].name, "rx-offloads")) {
1247 n = strtoull(optarg, &end, 16);
1249 rx_offloads = (uint64_t)n;
1251 rte_exit(EXIT_FAILURE,
1252 "rx-offloads must be >= 0\n");
1255 if (!strcmp(lgopts[opt_idx].name, "vxlan-gpe-port")) {
1258 vxlan_gpe_udp_port = (uint16_t)n;
1260 rte_exit(EXIT_FAILURE,
1261 "vxlan-gpe-port must be >= 0\n");
1263 if (!strcmp(lgopts[opt_idx].name,
1264 "geneve-parsed-port")) {
1267 geneve_udp_port = (uint16_t)n;
1269 rte_exit(EXIT_FAILURE,
1270 "geneve-parsed-port must be >= 0\n");
1272 if (!strcmp(lgopts[opt_idx].name, "print-event"))
1273 if (parse_event_printing_config(optarg, 1)) {
1274 rte_exit(EXIT_FAILURE,
1275 "invalid print-event argument\n");
1277 if (!strcmp(lgopts[opt_idx].name, "mask-event"))
1278 if (parse_event_printing_config(optarg, 0)) {
1279 rte_exit(EXIT_FAILURE,
1280 "invalid mask-event argument\n");
1282 if (!strcmp(lgopts[opt_idx].name, "hot-plug"))
1284 if (!strcmp(lgopts[opt_idx].name, "mlockall"))
1286 if (!strcmp(lgopts[opt_idx].name, "no-mlockall"))
1288 if (!strcmp(lgopts[opt_idx].name,
1289 "noisy-tx-sw-buffer-size")) {
1292 noisy_tx_sw_bufsz = n;
1294 rte_exit(EXIT_FAILURE,
1295 "noisy-tx-sw-buffer-size must be >= 0\n");
1297 if (!strcmp(lgopts[opt_idx].name,
1298 "noisy-tx-sw-buffer-flushtime")) {
1301 noisy_tx_sw_buf_flush_time = n;
1303 rte_exit(EXIT_FAILURE,
1304 "noisy-tx-sw-buffer-flushtime must be >= 0\n");
1306 if (!strcmp(lgopts[opt_idx].name,
1307 "noisy-lkup-memory")) {
1310 noisy_lkup_mem_sz = n;
1312 rte_exit(EXIT_FAILURE,
1313 "noisy-lkup-memory must be >= 0\n");
1315 if (!strcmp(lgopts[opt_idx].name,
1316 "noisy-lkup-num-writes")) {
1319 noisy_lkup_num_writes = n;
1321 rte_exit(EXIT_FAILURE,
1322 "noisy-lkup-num-writes must be >= 0\n");
1324 if (!strcmp(lgopts[opt_idx].name,
1325 "noisy-lkup-num-reads")) {
1328 noisy_lkup_num_reads = n;
1330 rte_exit(EXIT_FAILURE,
1331 "noisy-lkup-num-reads must be >= 0\n");
1333 if (!strcmp(lgopts[opt_idx].name,
1334 "noisy-lkup-num-reads-writes")) {
1337 noisy_lkup_num_reads_writes = n;
1339 rte_exit(EXIT_FAILURE,
1340 "noisy-lkup-num-reads-writes must be >= 0\n");
1342 if (!strcmp(lgopts[opt_idx].name, "no-iova-contig"))
1343 mempool_flags = MEMPOOL_F_NO_IOVA_CONTIG;
1345 if (!strcmp(lgopts[opt_idx].name, "rx-mq-mode")) {
1347 n = strtoul(optarg, &end, 16);
1348 if (n >= 0 && n <= ETH_MQ_RX_VMDQ_DCB_RSS)
1349 rx_mq_mode = (enum rte_eth_rx_mq_mode)n;
1351 rte_exit(EXIT_FAILURE,
1352 "rx-mq-mode must be >= 0 and <= %d\n",
1353 ETH_MQ_RX_VMDQ_DCB_RSS);
1355 if (!strcmp(lgopts[opt_idx].name, "record-core-cycles"))
1356 record_core_cycles = 1;
1357 if (!strcmp(lgopts[opt_idx].name, "record-burst-stats"))
1358 record_burst_stats = 1;
1362 rte_exit(EXIT_SUCCESS, "Displayed help\n");
1366 printf("Invalid option: %s\n", argv[optind]);
1367 rte_exit(EXIT_FAILURE,
1368 "Command line is incomplete or incorrect\n");
1373 if (optind != argc) {
1375 printf("Invalid parameter: %s\n", argv[optind]);
1376 rte_exit(EXIT_FAILURE, "Command line is incorrect\n");
1379 /* Set offload configuration from command line parameters. */
1380 rx_mode.offloads = rx_offloads;
1381 tx_mode.offloads = tx_offloads;
1383 if (mempool_flags & MEMPOOL_F_NO_IOVA_CONTIG &&
1384 mp_alloc_type != MP_ALLOC_ANON) {
1385 TESTPMD_LOG(WARNING, "cannot use no-iova-contig without "
1386 "mp-alloc=anon. mempool no-iova-contig is "