4 * Copyright (c) 2017 CESNET
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
11 * * Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * * Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in
15 * the documentation and/or other materials provided with the
17 * * Neither the name of CESNET nor the names of its
18 * contributors may be used to endorse or promote products derived
19 * from this software without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
36 #include <rte_common.h>
38 #include "szedata2_iobuf.h"
41 * IBUFs and OBUFs can generally be located at different offsets in different
43 * This part defines base offsets of IBUFs and OBUFs for various cards
44 * and firmwares (modes).
45 * Type of firmware (mode) is set through configuration option
46 * CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS.
47 * Possible values are:
48 * 0 - for cards (modes):
51 * 1 - for cards (modes):
54 * 2 - for cards (modes):
59 * 3 - for cards (modes):
63 * 4 - for cards (modes):
66 * 5 - for experimental firmwares and future use
68 #if !defined(RTE_LIBRTE_PMD_SZEDATA2_AS)
69 #error "RTE_LIBRTE_PMD_SZEDATA2_AS has to be defined"
70 #elif RTE_LIBRTE_PMD_SZEDATA2_AS == 0
77 const uint32_t szedata2_ibuf_base_table[] = {
80 const uint32_t szedata2_obuf_base_table[] = {
84 #elif RTE_LIBRTE_PMD_SZEDATA2_AS == 1
91 const uint32_t szedata2_ibuf_base_table[] = {
94 const uint32_t szedata2_obuf_base_table[] = {
98 #elif RTE_LIBRTE_PMD_SZEDATA2_AS == 2
107 const uint32_t szedata2_ibuf_base_table[] = {
111 const uint32_t szedata2_obuf_base_table[] = {
116 #elif RTE_LIBRTE_PMD_SZEDATA2_AS == 3
124 const uint32_t szedata2_ibuf_base_table[] = {
134 const uint32_t szedata2_obuf_base_table[] = {
145 #elif RTE_LIBRTE_PMD_SZEDATA2_AS == 4
152 const uint32_t szedata2_ibuf_base_table[] = {
164 const uint32_t szedata2_obuf_base_table[] = {
177 #elif RTE_LIBRTE_PMD_SZEDATA2_AS == 5
180 * Future use and experimental firmwares.
183 const uint32_t szedata2_ibuf_base_table[] = {
190 const uint32_t szedata2_obuf_base_table[] = {
199 #error "RTE_LIBRTE_PMD_SZEDATA2_AS has wrong value, see comments in config file"
202 const uint32_t szedata2_ibuf_count = RTE_DIM(szedata2_ibuf_base_table);
203 const uint32_t szedata2_obuf_count = RTE_DIM(szedata2_obuf_base_table);