2 * Copyright Droids Corporation, Microb Technology, Eirbot (2005)
\r
4 * This program is free software; you can redistribute it and/or modify
\r
5 * it under the terms of the GNU General Public License as published by
\r
6 * the Free Software Foundation; either version 2 of the License, or
\r
7 * (at your option) any later version.
\r
9 * This program is distributed in the hope that it will be useful,
\r
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
12 * GNU General Public License for more details.
\r
14 * You should have received a copy of the GNU General Public License
\r
15 * along with this program; if not, write to the Free Software
\r
16 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
\r
18 * Revision : $Id: uart_config.h,v 1.5 2009-11-08 17:24:33 zer0 Exp $
\r
22 /* Droids-corp 2004 - Zer0
\r
23 * config for uart module
\r
26 #ifndef UART_CONFIG_H
\r
27 #define UART_CONFIG_H
\r
33 /* compile uart0 fonctions, undefine it to pass compilation */
\r
34 #define UART0_COMPILE
\r
36 /* enable uart0 if == 1, disable if == 0 */
\r
37 #define UART0_ENABLED 1
\r
39 /* enable uart0 interrupts if == 1, disable if == 0 */
\r
40 #define UART0_INTERRUPT_ENABLED 1
\r
42 #define UART0_BAUDRATE 57600
\r
45 * if you enable this, the maximum baudrate you can reach is
\r
46 * higher, but the precision is lower.
\r
48 #define UART0_USE_DOUBLE_SPEED 1
\r
50 #define UART0_RX_FIFO_SIZE 64
\r
51 #define UART0_TX_FIFO_SIZE 127
\r
52 #define UART0_NBITS 8
\r
54 #define UART0_PARITY UART_PARTITY_NONE
\r
56 #define UART0_STOP_BIT UART_STOP_BITS_1
\r
58 /* .... same for uart 1, 2, 3 ... */
\r
64 /* compile uart1 fonctions, undefine it to pass compilation */
\r
65 #define UART1_COMPILE
\r
67 /* enable uart1 if == 1, disable if == 0 */
\r
68 #define UART1_ENABLED 1
\r
70 /* enable uart1 interrupts if == 1, disable if == 0 */
\r
71 #define UART1_INTERRUPT_ENABLED 1
\r
73 #define UART1_BAUDRATE 57600
\r
76 * if you enable this, the maximum baudrate you can reach is
\r
77 * higher, but the precision is lower.
\r
79 #define UART1_USE_DOUBLE_SPEED 1
\r
81 #define UART1_RX_FIFO_SIZE 64
\r
82 #define UART1_TX_FIFO_SIZE 127
\r
83 #define UART1_NBITS 8
\r
85 #define UART1_PARITY UART_PARTITY_NONE
\r
87 #define UART1_STOP_BIT UART_STOP_BITS_1
\r
89 /* .... same for uart 1, 2, 3 ... */
\r