Enable queue priority.
+* ``--prod_type_ethdev``
+
+ Use ethernet device as producer.
Eventdev Tests
--------------
updates the number of cycles to forward a packet. The application uses this
value to compute the average latency to a forward packet.
+When ``--prod_type_ethdev`` command line option is selected, the application
+uses the probed ethernet devices as producers by configuring them as Rx
+adapters instead of using synthetic producers.
+
Application options
^^^^^^^^^^^^^^^^^^^
--worker_deq_depth
--fwd_latency
--queue_priority
+ --prod_type_ethdev
Example
^^^^^^^
sudo build/app/dpdk-test-eventdev -c 0xf -s 0x1 --vdev=event_sw0 -- \
--test=perf_queue --plcores=2 --wlcore=3 --stlist=p --nb_pkts=0
+Example command to run perf queue test with ethernet ports:
+
+.. code-block:: console
+
+ sudo build/app/dpdk-test-eventdev --vdev=event_sw0 -- \
+ --test=perf_queue --plcores=2 --wlcore=3 --stlist=p --prod_type_ethdev
PERF_ATQ Test
~~~~~~~~~~~~~~~
--nb_pkts
--worker_deq_depth
--fwd_latency
+ --prod_type_ethdev
Example
^^^^^^^
sudo build/app/dpdk-test-eventdev --vdev=event_octeontx -- \
--test=perf_atq --plcores=2 --wlcore=3 --stlist=p --nb_pkts=0
+
+
+PIPELINE_QUEUE Test
+~~~~~~~~~~~~~~~~~~~
+
+This is a pipeline test case that aims at testing the following:
+
+#. Measure the end-to-end performance of an event dev with a ethernet dev.
+#. Maintain packet ordering from Rx to Tx.
+
+.. _table_eventdev_pipeline_queue_test:
+
+.. table:: Pipeline queue test eventdev configuration.
+
+ +---+--------------+----------------+-----------------------------------------+
+ | # | Items | Value | Comments |
+ | | | | |
+ +===+==============+================+=========================================+
+ | 1 | nb_queues | (nb_producers | Queues will be configured based on the |
+ | | | * nb_stages) + | user requested sched type list(--stlist)|
+ | | | x | Here value of x is 1 in generic pipeline|
+ | | | | and nb_producers in lockfree pipeline |
+ +---+--------------+----------------+-----------------------------------------+
+ | 2 | nb_producers | >= 1 | Producers will be configured based on |
+ | | | | the number of detected ethernet devices.|
+ | | | | Each ethdev will be configured as an Rx |
+ | | | | adapter. |
+ +---+--------------+----------------+-----------------------------------------+
+ | 3 | nb_workers | >= 1 | Selected through --wlcores command line |
+ | | | | argument |
+ +---+--------------+----------------+-----------------------------------------+
+ | 4 | nb_ports | nb_workers + | Workers use port 0 to port n. |
+ | | | nb_producers | Producers use port n+1 to port n+m, |
+ | | | | depending on the Rx adapter capability. |
+ +---+--------------+----------------+-----------------------------------------+
+
+.. _figure_eventdev_pipeline_queue_test_generic:
+
+.. figure:: img/eventdev_pipeline_queue_test_generic.*
+
+.. _figure_eventdev_pipeline_queue_test_lockfree:
+
+.. figure:: img/eventdev_pipeline_queue_test_lockfree.*
+
+ pipeline queue test operation.
+
+The pipeline queue test configures the eventdev with Q queues and P ports,
+where Q and P is a function of the number of workers, the number of producers
+and number of stages as mentioned in :numref:`table_eventdev_pipeline_queue_test`.
+
+The user can choose the number of workers and number of stages through the
+``--wlcores`` and the ``--stlist`` application command line arguments
+respectively.
+
+The number of producers depends on the number of ethernet devices detected and
+each ethernet device is configured as a event_eth_rx_adapter that acts as a
+producer.
+
+The producer(s) injects the events to eventdev based the first stage sched type
+list requested by the user through ``--stlist`` the command line argument.
+
+Based on the number of stages to process(selected through ``--stlist``),
+The application forwards the event to next upstream queue and when it reaches
+the last stage in the pipeline if the event type is ``atomic`` it is enqueued
+onto ethdev Tx queue else to maintain ordering the event type is set to
+``atomic`` and enqueued onto the last stage queue.
+
+If the ethernet has ``DEV_TX_OFFLOAD_MT_LOCKFREE`` capability then the worker
+cores transmit the packets directly. Else the worker cores enqueue the packet
+onto the ``SINGLE_LINK_QUEUE`` that is managed by a Tx service. The Tx service
+dequeues the packet and transmits it.
+
+On packet Tx, application increments the number events processed and print
+periodically in one second to get the number of events processed in one
+second.
+
+
+Application options
+^^^^^^^^^^^^^^^^^^^
+
+Supported application command line options are following::
+
+ --verbose
+ --dev
+ --test
+ --socket_id
+ --pool_sz
+ --wlcores
+ --stlist
+ --worker_deq_depth
+ --prod_type_ethdev
+
+
+.. Note::
+
+ * The ``--prod_type_ethdev`` is mandatory for running this test.
+
+Example
+^^^^^^^
+
+Example command to run pipeline queue test:
+
+.. code-block:: console
+
+ sudo build/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \
+ --test=pipeline_queue --wlcore=1 --prod_type_ethdev --stlist=a
+
+
+PIPELINE_ATQ Test
+~~~~~~~~~~~~~~~~~~~
+
+This is a pipeline test case that aims at testing the following with
+``all types queue`` eventdev scheme.
+
+#. Measure the end-to-end performance of an event dev with a ethernet dev.
+#. Maintain packet ordering from Rx to Tx.
+
+.. _table_eventdev_pipeline_atq_test:
+
+.. table:: Pipeline atq test eventdev configuration.
+
+ +---+--------------+----------------+-----------------------------------------+
+ | # | Items | Value | Comments |
+ | | | | |
+ +===+==============+================+=========================================+
+ | 1 | nb_queues | nb_producers + | Queues will be configured based on the |
+ | | | x | user requested sched type list(--stlist)|
+ | | | | where x = 1 in generic pipeline and 0 |
+ | | | | in lockfree pipeline |
+ +---+--------------+----------------+-----------------------------------------+
+ | 2 | nb_producers | >= 1 | Producers will be configured based on |
+ | | | | the number of detected ethernet devices.|
+ | | | | Each ethdev will be configured as an Rx |
+ | | | | adapter. |
+ +---+--------------+----------------+-----------------------------------------+
+ | 3 | nb_workers | >= 1 | Selected through --wlcores command line |
+ | | | | argument |
+ +---+--------------+----------------+-----------------------------------------+
+ | 4 | nb_ports | nb_workers + | Workers use port 0 to port n. |
+ | | | nb_producers | Producers use port n+1 to port n+m, |
+ | | | | depending on the Rx adapter capability. |
+ +---+--------------+----------------+-----------------------------------------+
+
+.. _figure_eventdev_pipeline_atq_test_generic:
+
+.. figure:: img/eventdev_pipeline_atq_test_generic.*
+
+.. _figure_eventdev_pipeline_atq_test_lockfree:
+
+.. figure:: img/eventdev_pipeline_atq_test_lockfree.*
+
+ pipeline atq test operation.
+
+The pipeline atq test configures the eventdev with Q queues and P ports,
+where Q and P is a function of the number of workers, the number of producers
+and number of stages as mentioned in :numref:`table_eventdev_pipeline_atq_test`.
+
+The atq queue test functions as same as ``pipeline_queue`` test. The difference
+is, It uses, ``all type queue scheme`` instead of separate queues for each
+stage and thus reduces the number of queues required to realize the use case.
+
+
+Application options
+^^^^^^^^^^^^^^^^^^^
+
+Supported application command line options are following::
+
+ --verbose
+ --dev
+ --test
+ --socket_id
+ --pool_sz
+ --wlcores
+ --stlist
+ --worker_deq_depth
+ --prod_type_ethdev
+
+
+.. Note::
+
+ * The ``--prod_type_ethdev`` is mandatory for running this test.
+
+Example
+^^^^^^^
+
+Example command to run pipeline queue test:
+
+.. code-block:: console
+
+ sudo build/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \
+ --test=pipeline_atq --wlcore=1 --prod_type_ethdev --stlist=a