#include <rte_memcpy.h>
#include <rte_vfio.h>
-#include "eal_private.h"
#include "eal_filesystem.h"
#include "private.h"
extern struct rte_pci_bus rte_pci_bus;
static int
-pci_get_kernel_driver_by_path(const char *filename, char *dri_name)
+pci_get_kernel_driver_by_path(const char *filename, char *dri_name,
+ size_t len)
{
int count;
char path[PATH_MAX];
name = strrchr(path, '/');
if (name) {
- strlcpy(dri_name, name + 1, sizeof(dri_name));
+ strlcpy(dri_name, name + 1, len);
return 0;
}
static int
find_max_end_va(const struct rte_memseg_list *msl, void *arg)
{
- size_t sz = msl->memseg_arr.len * msl->page_sz;
+ size_t sz = msl->len;
void *end_va = RTE_PTR_ADD(msl->base_va, sz);
void **max_va = arg;
return -1;
memset(dev, 0, sizeof(*dev));
+ dev->device.bus = &rte_pci_bus.bus;
dev->addr = *addr;
/* get vendor id */
/* parse driver */
snprintf(filename, sizeof(filename), "%s/driver", dirname);
- ret = pci_get_kernel_driver_by_path(filename, driver);
+ ret = pci_get_kernel_driver_by_path(filename, driver, sizeof(driver));
if (ret < 0) {
RTE_LOG(ERR, EAL, "Fail to get kernel driver\n");
free(dev);
if (ret < 0) {
rte_pci_insert_device(dev2, dev);
} else { /* already registered */
- dev2->kdrv = dev->kdrv;
- dev2->max_vfs = dev->max_vfs;
- pci_name_set(dev2);
- memmove(dev2->mem_resource, dev->mem_resource,
- sizeof(dev->mem_resource));
+ if (!rte_dev_is_probed(&dev2->device)) {
+ dev2->kdrv = dev->kdrv;
+ dev2->max_vfs = dev->max_vfs;
+ pci_name_set(dev2);
+ memmove(dev2->mem_resource,
+ dev->mem_resource,
+ sizeof(dev->mem_resource));
+ } else {
+ /**
+ * If device is plugged and driver is
+ * probed already, (This happens when
+ * we call rte_dev_probe which will
+ * scan all device on the bus) we don't
+ * need to do anything here unless...
+ **/
+ if (dev2->kdrv != dev->kdrv ||
+ dev2->max_vfs != dev->max_vfs)
+ /*
+ * This should not happens.
+ * But it is still possible if
+ * we unbind a device from
+ * vfio or uio before hotplug
+ * remove and rebind it with
+ * a different configure.
+ * So we just print out the
+ * error as an alarm.
+ */
+ RTE_LOG(ERR, EAL, "Unexpected device scan at %s!\n",
+ filename);
+ }
free(dev);
}
return 0;
fclose(fp);
mgaw = ((vtd_cap_reg & VTD_CAP_MGAW_MASK) >> VTD_CAP_MGAW_SHIFT) + 1;
- if (mgaw < X86_VA_WIDTH)
- return false;
+ /*
+ * Assuming there is no limitation by now. We can not know at this point
+ * because the memory has not been initialized yet. Setting the dma mask
+ * will force a check once memory initialization is done. We can not do
+ * a fallback to IOVA PA now, but if the dma check fails, the error
+ * message should advice for using '--iova-mode pa' if IOVA VA is the
+ * current mode.
+ */
+ rte_mem_set_dma_mask(mgaw);
return true;
}
#elif defined(RTE_ARCH_PPC_64)
FOREACH_DEVICE_ON_PCIBUS(dev) {
if (!rte_pci_match(drv, dev))
continue;
- if (!pci_one_device_iommu_support_va(dev))
- return false;
+ /*
+ * just one PCI device needs to be checked out because
+ * the IOMMU hardware is the same for all of them.
+ */
+ return pci_one_device_iommu_support_va(dev);
}
}
return true;
int rte_pci_read_config(const struct rte_pci_device *device,
void *buf, size_t len, off_t offset)
{
+ char devname[RTE_DEV_NAME_MAX_LEN] = "";
const struct rte_intr_handle *intr_handle = &device->intr_handle;
- switch (intr_handle->type) {
- case RTE_INTR_HANDLE_UIO:
- case RTE_INTR_HANDLE_UIO_INTX:
+ switch (device->kdrv) {
+ case RTE_KDRV_IGB_UIO:
+ case RTE_KDRV_UIO_GENERIC:
return pci_uio_read_config(intr_handle, buf, len, offset);
-
#ifdef VFIO_PRESENT
- case RTE_INTR_HANDLE_VFIO_MSIX:
- case RTE_INTR_HANDLE_VFIO_MSI:
- case RTE_INTR_HANDLE_VFIO_LEGACY:
+ case RTE_KDRV_VFIO:
return pci_vfio_read_config(intr_handle, buf, len, offset);
#endif
default:
+ rte_pci_device_name(&device->addr, devname,
+ RTE_DEV_NAME_MAX_LEN);
RTE_LOG(ERR, EAL,
- "Unknown handle type of fd %d\n",
- intr_handle->fd);
+ "Unknown driver type for %s\n", devname);
return -1;
}
}
int rte_pci_write_config(const struct rte_pci_device *device,
const void *buf, size_t len, off_t offset)
{
+ char devname[RTE_DEV_NAME_MAX_LEN] = "";
const struct rte_intr_handle *intr_handle = &device->intr_handle;
- switch (intr_handle->type) {
- case RTE_INTR_HANDLE_UIO:
- case RTE_INTR_HANDLE_UIO_INTX:
+ switch (device->kdrv) {
+ case RTE_KDRV_IGB_UIO:
+ case RTE_KDRV_UIO_GENERIC:
return pci_uio_write_config(intr_handle, buf, len, offset);
-
#ifdef VFIO_PRESENT
- case RTE_INTR_HANDLE_VFIO_MSIX:
- case RTE_INTR_HANDLE_VFIO_MSI:
- case RTE_INTR_HANDLE_VFIO_LEGACY:
+ case RTE_KDRV_VFIO:
return pci_vfio_write_config(intr_handle, buf, len, offset);
#endif
default:
+ rte_pci_device_name(&device->addr, devname,
+ RTE_DEV_NAME_MAX_LEN);
RTE_LOG(ERR, EAL,
- "Unknown handle type of fd %d\n",
- intr_handle->fd);
+ "Unknown driver type for %s\n", devname);
return -1;
}
}