#define HWRM_VNIC_RSS_QCFG (UINT32_C(0x47))
#define HWRM_VNIC_PLCMODES_CFG (UINT32_C(0x48))
#define HWRM_VNIC_PLCMODES_QCFG (UINT32_C(0x49))
+#define HWRM_VNIC_QCAPS (UINT32_C(0x4a))
#define HWRM_RING_ALLOC (UINT32_C(0x50))
#define HWRM_RING_FREE (UINT32_C(0x51))
-#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAM (UINT32_C(0x53))
+#define HWRM_RING_CMPL_RING_QAGGINT_PARAMS (UINT32_C(0x52))
+#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS (UINT32_C(0x53))
#define HWRM_RING_RESET (UINT32_C(0x5e))
#define HWRM_RING_GRP_ALLOC (UINT32_C(0x60))
-#define HWRM_RING_GRP_ALLOC (UINT32_C(0x60))
#define HWRM_RING_GRP_FREE (UINT32_C(0x61))
#define HWRM_VNIC_RSS_COS_LB_CTX_ALLOC (UINT32_C(0x70))
#define HWRM_VNIC_RSS_COS_LB_CTX_FREE (UINT32_C(0x71))
#define HWRM_CFA_L2_FILTER_CFG (UINT32_C(0x92))
#define HWRM_CFA_L2_SET_RX_MASK (UINT32_C(0x93))
/* Reserved for future use */
-#define RESERVED4 (UINT32_C(0x94))
+#define HWRM_CFA_VLAN_ANTISPOOF_CFG (UINT32_C(0x94))
#define HWRM_CFA_TUNNEL_FILTER_ALLOC (UINT32_C(0x95))
#define HWRM_CFA_TUNNEL_FILTER_FREE (UINT32_C(0x96))
#define HWRM_CFA_NTUPLE_FILTER_ALLOC (UINT32_C(0x99))
#define HWRM_STAT_CTX_FREE (UINT32_C(0xb1))
#define HWRM_STAT_CTX_QUERY (UINT32_C(0xb2))
#define HWRM_STAT_CTX_CLR_STATS (UINT32_C(0xb3))
+#define HWRM_FW_RESET (UINT32_C(0xc0))
+#define HWRM_FW_QSTATUS (UINT32_C(0xc1))
#define HWRM_EXEC_FWD_RESP (UINT32_C(0xd0))
#define HWRM_REJECT_FWD_RESP (UINT32_C(0xd1))
#define HWRM_FWD_RESP (UINT32_C(0xd2))
* command will be persistent over warm boot.
*/
#define HWRM_FUNC_CFG_INPUT_FLAGS_VIRT_MAC_PERSIST UINT32_C(0x800)
+ /*
+ * This bit only applies to the VF. If this bit is set, the
+ * statistic context counters will not be cleared when the
+ * statistic context is freed or a function reset is called on
+ * VF. This bit will be cleared when the PF is unloaded or a
+ * function reset is called on the PF.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_NO_AUTOCLEAR_STATISTIC \
+ UINT32_C(0x1000)
uint32_t enables;
/* This bit must be '1' for the mtu field to be configured. */
#define HWRM_FUNC_CFG_INPUT_ENABLES_MTU UINT32_C(0x1)
*/
} __attribute__((packed));
+/* hwrm_port_led_cfg */
+/*
+ * Description: This function is used to configure LEDs on a given port. Each
+ * port has individual set of LEDs associated with it. These LEDs are used for
+ * speed/link configuration as well as activity indicator configuration. Up to
+ * three LEDs can be configured, one for activity and two for speeds.
+ */
+/* Input (64 bytes) */
+struct hwrm_port_led_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the led0_id field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_ID UINT32_C(0x1)
+ /* This bit must be '1' for the led0_state field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_STATE UINT32_C(0x2)
+ /* This bit must be '1' for the led0_color field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_COLOR UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the led0_blink_on field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_ON UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the led0_blink_off field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_OFF UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the led0_group_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_GROUP_ID UINT32_C(0x20)
+ /* This bit must be '1' for the led1_id field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_ID UINT32_C(0x40)
+ /* This bit must be '1' for the led1_state field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_STATE UINT32_C(0x80)
+ /* This bit must be '1' for the led1_color field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_COLOR UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the led1_blink_on field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_ON UINT32_C(0x200)
+ /*
+ * This bit must be '1' for the led1_blink_off field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_OFF UINT32_C(0x400)
+ /*
+ * This bit must be '1' for the led1_group_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_GROUP_ID UINT32_C(0x800)
+ /* This bit must be '1' for the led2_id field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_ID UINT32_C(0x1000)
+ /* This bit must be '1' for the led2_state field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_STATE UINT32_C(0x2000)
+ /* This bit must be '1' for the led2_color field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_COLOR UINT32_C(0x4000)
+ /*
+ * This bit must be '1' for the led2_blink_on field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_ON UINT32_C(0x8000)
+ /*
+ * This bit must be '1' for the led2_blink_off field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_OFF UINT32_C(0x10000)
+ /*
+ * This bit must be '1' for the led2_group_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_GROUP_ID UINT32_C(0x20000)
+ /* This bit must be '1' for the led3_id field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_ID UINT32_C(0x40000)
+ /* This bit must be '1' for the led3_state field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_STATE UINT32_C(0x80000)
+ /* This bit must be '1' for the led3_color field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_COLOR UINT32_C(0x100000)
+ /*
+ * This bit must be '1' for the led3_blink_on field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_ON UINT32_C(0x200000)
+ /*
+ * This bit must be '1' for the led3_blink_off field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_OFF \
+ UINT32_C(0x400000)
+ /*
+ * This bit must be '1' for the led3_group_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_GROUP_ID UINT32_C(0x800000)
+ uint16_t port_id;
+ /* Port ID of port whose LEDs are configured. */
+ uint8_t num_leds;
+ /*
+ * The number of LEDs that are being configured. Up to 4 LEDs
+ * can be configured with this command.
+ */
+ uint8_t rsvd;
+ /* Reserved field. */
+ uint8_t led0_id;
+ /* An identifier for the LED #0. */
+ uint8_t led0_state;
+ /* The requested state of the LED #0. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led0_color;
+ /* The requested color of LED #0. */
+ /* Default */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_0;
+ uint16_t led0_blink_on;
+ /*
+ * If the LED #0 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led0_blink_off;
+ /*
+ * If the LED #0 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led0_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #0 belongs to.
+ * If set to 0, then the LED #0 shall not be grouped and shall
+ * be treated as an individual resource. For all other non-zero
+ * values of this field, LED #0 shall be grouped together with
+ * the LEDs with the same group ID value.
+ */
+ uint8_t rsvd0;
+ /* Reserved field. */
+ uint8_t led1_id;
+ /* An identifier for the LED #1. */
+ uint8_t led1_state;
+ /* The requested state of the LED #1. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led1_color;
+ /* The requested color of LED #1. */
+ /* Default */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_1;
+ uint16_t led1_blink_on;
+ /*
+ * If the LED #1 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led1_blink_off;
+ /*
+ * If the LED #1 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led1_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #1 belongs to.
+ * If set to 0, then the LED #1 shall not be grouped and shall
+ * be treated as an individual resource. For all other non-zero
+ * values of this field, LED #1 shall be grouped together with
+ * the LEDs with the same group ID value.
+ */
+ uint8_t rsvd1;
+ /* Reserved field. */
+ uint8_t led2_id;
+ /* An identifier for the LED #2. */
+ uint8_t led2_state;
+ /* The requested state of the LED #2. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led2_color;
+ /* The requested color of LED #2. */
+ /* Default */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_2;
+ uint16_t led2_blink_on;
+ /*
+ * If the LED #2 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led2_blink_off;
+ /*
+ * If the LED #2 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led2_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #2 belongs to.
+ * If set to 0, then the LED #2 shall not be grouped and shall
+ * be treated as an individual resource. For all other non-zero
+ * values of this field, LED #2 shall be grouped together with
+ * the LEDs with the same group ID value.
+ */
+ uint8_t rsvd2;
+ /* Reserved field. */
+ uint8_t led3_id;
+ /* An identifier for the LED #3. */
+ uint8_t led3_state;
+ /* The requested state of the LED #3. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led3_color;
+ /* The requested color of LED #3. */
+ /* Default */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_3;
+ uint16_t led3_blink_on;
+ /*
+ * If the LED #3 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led3_blink_off;
+ /*
+ * If the LED #3 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led3_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #3 belongs to.
+ * If set to 0, then the LED #3 shall not be grouped and shall
+ * be treated as an individual resource. For all other non-zero
+ * values of this field, LED #3 shall be grouped together with
+ * the LEDs with the same group ID value.
+ */
+ uint8_t rsvd3;
+ /* Reserved field. */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_port_led_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_led_qcfg */
+/*
+ * Description: This function is used to query configuration of LEDs on a given
+ * port. Each port has individual set of LEDs associated with it. These LEDs are
+ * used for speed/link configuration as well as activity indicator
+ * configuration. Up to three LEDs can be configured, one for activity and two
+ * for speeds.
+ */
+/* Input (24 bytes) */
+struct hwrm_port_led_qcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint16_t port_id;
+ /* Port ID of port whose LED configuration is being queried. */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (56 bytes) */
+struct hwrm_port_led_qcfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint8_t num_leds;
+ /*
+ * The number of LEDs that are configured on this port. Up to 4
+ * LEDs can be returned in the response.
+ */
+ uint8_t led0_id;
+ /* An identifier for the LED #0. */
+ uint8_t led0_type;
+ /* The type of LED #0. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led0_state;
+ /* The current state of the LED #0. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led0_color;
+ /* The color of LED #0. */
+ /* Default */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_0;
+ uint16_t led0_blink_on;
+ /*
+ * If the LED #0 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led0_blink_off;
+ /*
+ * If the LED #0 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led0_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #0 belongs to.
+ * If set to 0, then the LED #0 is not grouped. For all other
+ * non-zero values of this field, LED #0 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t led1_id;
+ /* An identifier for the LED #1. */
+ uint8_t led1_type;
+ /* The type of LED #1. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led1_state;
+ /* The current state of the LED #1. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led1_color;
+ /* The color of LED #1. */
+ /* Default */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_1;
+ uint16_t led1_blink_on;
+ /*
+ * If the LED #1 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led1_blink_off;
+ /*
+ * If the LED #1 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led1_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #1 belongs to.
+ * If set to 0, then the LED #1 is not grouped. For all other
+ * non-zero values of this field, LED #1 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t led2_id;
+ /* An identifier for the LED #2. */
+ uint8_t led2_type;
+ /* The type of LED #2. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led2_state;
+ /* The current state of the LED #2. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led2_color;
+ /* The color of LED #2. */
+ /* Default */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_2;
+ uint16_t led2_blink_on;
+ /*
+ * If the LED #2 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led2_blink_off;
+ /*
+ * If the LED #2 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led2_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #2 belongs to.
+ * If set to 0, then the LED #2 is not grouped. For all other
+ * non-zero values of this field, LED #2 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t led3_id;
+ /* An identifier for the LED #3. */
+ uint8_t led3_type;
+ /* The type of LED #3. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led3_state;
+ /* The current state of the LED #3. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led3_color;
+ /* The color of LED #3. */
+ /* Default */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_3;
+ uint16_t led3_blink_on;
+ /*
+ * If the LED #3 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led3_blink_off;
+ /*
+ * If the LED #3 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led3_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #3 belongs to.
+ * If set to 0, then the LED #3 is not grouped. For all other
+ * non-zero values of this field, LED #3 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t unused_4;
+ uint16_t unused_5;
+ uint8_t unused_6;
+ uint8_t unused_7;
+ uint8_t unused_8;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_led_qcaps */
+/*
+ * Description: This function is used to query capabilities of LEDs on a given
+ * port. Each port has individual set of LEDs associated with it. These LEDs are
+ * used for speed/link configuration as well as activity indicator
+ * configuration.
+ */
+/* Input (24 bytes) */
+struct hwrm_port_led_qcaps_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint16_t port_id;
+ /* Port ID of port whose LED configuration is being queried. */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (48 bytes) */
+struct hwrm_port_led_qcaps_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint8_t num_leds;
+ /*
+ * The number of LEDs that are configured on this port. Up to 4
+ * LEDs can be returned in the response.
+ */
+ uint8_t unused_0[3];
+ /* Reserved for future use. */
+ uint8_t led0_id;
+ /* An identifier for the LED #0. */
+ uint8_t led0_type;
+ /* The type of LED #0. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led0_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #0 belongs to.
+ * If set to 0, then the LED #0 cannot be grouped. For all other
+ * non-zero values of this field, LED #0 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t unused_1;
+ uint16_t led0_state_caps;
+ /* The states supported by LED #0. */
+ /*
+ * If set to 1, this LED is enabled. If set to 0, this LED is
+ * disabled.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ENABLED UINT32_C(0x1)
+ /*
+ * If set to 1, off state is supported on this LED. If set to 0,
+ * off state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_OFF_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, on state is supported on this LED. If set to 0,
+ * on state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ON_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, blink state is supported on this LED. If set to
+ * 0, blink state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, blink_alt state is supported on this LED. If set
+ * to 0, blink_alt state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_ALT_SUPPORTED \
+ UINT32_C(0x10)
+ uint16_t led0_color_caps;
+ /* The colors supported by LED #0. */
+ /* reserved */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_RSVD UINT32_C(0x1)
+ /*
+ * If set to 1, Amber color is supported on this LED. If set to
+ * 0, Amber color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_AMBER_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, Green color is supported on this LED. If set to
+ * 0, Green color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_GREEN_SUPPORTED \
+ UINT32_C(0x4)
+ uint8_t led1_id;
+ /* An identifier for the LED #1. */
+ uint8_t led1_type;
+ /* The type of LED #1. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led1_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #1 belongs to.
+ * If set to 0, then the LED #0 cannot be grouped. For all other
+ * non-zero values of this field, LED #0 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t unused_2;
+ uint16_t led1_state_caps;
+ /* The states supported by LED #1. */
+ /*
+ * If set to 1, this LED is enabled. If set to 0, this LED is
+ * disabled.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ENABLED UINT32_C(0x1)
+ /*
+ * If set to 1, off state is supported on this LED. If set to 0,
+ * off state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_OFF_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, on state is supported on this LED. If set to 0,
+ * on state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ON_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, blink state is supported on this LED. If set to
+ * 0, blink state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, blink_alt state is supported on this LED. If set
+ * to 0, blink_alt state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_ALT_SUPPORTED \
+ UINT32_C(0x10)
+ uint16_t led1_color_caps;
+ /* The colors supported by LED #1. */
+ /* reserved */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_RSVD UINT32_C(0x1)
+ /*
+ * If set to 1, Amber color is supported on this LED. If set to
+ * 0, Amber color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_AMBER_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, Green color is supported on this LED. If set to
+ * 0, Green color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_GREEN_SUPPORTED \
+ UINT32_C(0x4)
+ uint8_t led2_id;
+ /* An identifier for the LED #2. */
+ uint8_t led2_type;
+ /* The type of LED #2. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led2_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #0 belongs to.
+ * If set to 0, then the LED #0 cannot be grouped. For all other
+ * non-zero values of this field, LED #0 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t unused_3;
+ uint16_t led2_state_caps;
+ /* The states supported by LED #2. */
+ /*
+ * If set to 1, this LED is enabled. If set to 0, this LED is
+ * disabled.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ENABLED UINT32_C(0x1)
+ /*
+ * If set to 1, off state is supported on this LED. If set to 0,
+ * off state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_OFF_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, on state is supported on this LED. If set to 0,
+ * on state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ON_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, blink state is supported on this LED. If set to
+ * 0, blink state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, blink_alt state is supported on this LED. If set
+ * to 0, blink_alt state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_ALT_SUPPORTED \
+ UINT32_C(0x10)
+ uint16_t led2_color_caps;
+ /* The colors supported by LED #2. */
+ /* reserved */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_RSVD UINT32_C(0x1)
+ /*
+ * If set to 1, Amber color is supported on this LED. If set to
+ * 0, Amber color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_AMBER_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, Green color is supported on this LED. If set to
+ * 0, Green color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_GREEN_SUPPORTED \
+ UINT32_C(0x4)
+ uint8_t led3_id;
+ /* An identifier for the LED #3. */
+ uint8_t led3_type;
+ /* The type of LED #3. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led3_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #3 belongs to.
+ * If set to 0, then the LED #0 cannot be grouped. For all other
+ * non-zero values of this field, LED #0 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t unused_4;
+ uint16_t led3_state_caps;
+ /* The states supported by LED #3. */
+ /*
+ * If set to 1, this LED is enabled. If set to 0, this LED is
+ * disabled.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ENABLED UINT32_C(0x1)
+ /*
+ * If set to 1, off state is supported on this LED. If set to 0,
+ * off state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_OFF_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, on state is supported on this LED. If set to 0,
+ * on state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ON_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, blink state is supported on this LED. If set to
+ * 0, blink state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, blink_alt state is supported on this LED. If set
+ * to 0, blink_alt state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_ALT_SUPPORTED \
+ UINT32_C(0x10)
+ uint16_t led3_color_caps;
+ /* The colors supported by LED #3. */
+ /* reserved */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_RSVD UINT32_C(0x1)
+ /*
+ * If set to 1, Amber color is supported on this LED. If set to
+ * 0, Amber color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_AMBER_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, Green color is supported on this LED. If set to
+ * 0, Green color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_GREEN_SUPPORTED \
+ UINT32_C(0x4)
+ uint8_t unused_5;
+ uint8_t unused_6;
+ uint8_t unused_7;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
/* hwrm_queue_qportcfg */
/*
* Description: This function is called by a driver to query queue configuration
*/
} __attribute__((packed));
-
/* hwrm_ring_alloc */
/*
* Description: This command allocates and does basic preparation for a ring.
*/
} __attribute__((packed));
+/* hwrm_cfa_vlan_antispoof_cfg */
+/* Description: Configures vlan anti-spoof filters for VF. */
+/* Input (32 bytes) */
+struct hwrm_cfa_vlan_antispoof_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t fid;
+ /*
+ * Function ID of the function that is being configured. Only valid for
+ * a VF FID configured by the PF.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint32_t num_vlan_entries;
+ /* Number of VLAN entries in the vlan_tag_mask_tbl. */
+ uint64_t vlan_tag_mask_tbl_addr;
+ /*
+ * The vlan_tag_mask_tbl_addr is the DMA address of the VLAN antispoof
+ * table. Each table entry contains the 16-bit TPID (0x8100 or 0x88a8
+ * only), 16-bit VLAN ID, and a 16-bit mask, all in network order to
+ * match hwrm_cfa_l2_set_rx_mask. For an individual VLAN entry, the mask
+ * value should be 0xfff for the 12-bit VLAN ID.
+ */
+};
+
+/* Output (16 bytes) */
+struct hwrm_cfa_vlan_antispoof_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+};
+
/* hwrm_tunnel_dst_port_query */
/*
* Description: This function is called by a driver to query tunnel type
*/
} __attribute__((packed));
+/* Short Command Structure (16 bytes) */
+struct hwrm_short_input {
+ uint16_t req_type;
+ uint16_t signature;
+ #define HWRM_SHORT_REQ_SIGNATURE_SHORT_CMD (UINT32_C(0x4321))
+ uint16_t unused_0;
+ uint16_t size;
+ uint64_t req_addr;
+} __attribute__((packed));
+
#define HWRM_GET_HWRM_ERROR_CODE(arg) \
{ \
typeof(arg) x = (arg); \