*/
#define I40E_FW_API_VERSION_MAJOR 0x0001
-#define I40E_FW_API_VERSION_MINOR 0x0004
+#define I40E_FW_API_VERSION_MINOR 0x0005
struct i40e_aq_desc {
__le16 flags;
i40e_aqc_opc_remove_statistics = 0x0202,
i40e_aqc_opc_set_port_parameters = 0x0203,
i40e_aqc_opc_get_switch_resource_alloc = 0x0204,
+ i40e_aqc_opc_set_switch_config = 0x0205,
+ i40e_aqc_opc_rx_ctl_reg_read = 0x0206,
+ i40e_aqc_opc_rx_ctl_reg_write = 0x0207,
i40e_aqc_opc_add_vsi = 0x0210,
i40e_aqc_opc_update_vsi_parameters = 0x0211,
i40e_aqc_opc_get_phy_wol_caps = 0x0621,
i40e_aqc_opc_set_phy_debug = 0x0622,
i40e_aqc_opc_upload_ext_phy_fm = 0x0625,
+ i40e_aqc_opc_run_phy_activity = 0x0626,
/* NVM commands */
i40e_aqc_opc_nvm_read = 0x0701,
i40e_aqc_opc_nvm_config_read = 0x0704,
i40e_aqc_opc_nvm_config_write = 0x0705,
i40e_aqc_opc_oem_post_update = 0x0720,
+ i40e_aqc_opc_thermal_sensor = 0x0721,
/* virtualization commands */
i40e_aqc_opc_send_msg_to_pf = 0x0801,
I40E_CHECK_STRUCT_LEN(0x10, i40e_aqc_switch_resource_alloc_element_resp);
+/* Set Switch Configuration (direct 0x0205) */
+struct i40e_aqc_set_switch_config {
+ __le16 flags;
+#define I40E_AQ_SET_SWITCH_CFG_PROMISC 0x0001
+#define I40E_AQ_SET_SWITCH_CFG_L2_FILTER 0x0002
+ __le16 valid_flags;
+ u8 reserved[12];
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_set_switch_config);
+
+/* Read Receive control registers (direct 0x0206)
+ * Write Receive control registers (direct 0x0207)
+ * used for accessing Rx control registers that can be
+ * slow and need special handling when under high Rx load
+ */
+struct i40e_aqc_rx_ctl_reg_read_write {
+ __le32 reserved1;
+ __le32 address;
+ __le32 reserved2;
+ __le32 value;
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_rx_ctl_reg_read_write);
+
/* Add VSI (indirect 0x0210)
* this indirect command uses struct i40e_aqc_vsi_properties_data
* as the indirect buffer (128 bytes)
I40E_AQ_VSI_TC_QUE_NUMBER_SHIFT)
/* queueing option section */
u8 queueing_opt_flags;
+#ifdef X722_SUPPORT
+#define I40E_AQ_VSI_QUE_OPT_MULTICAST_UDP_ENA 0x04
+#define I40E_AQ_VSI_QUE_OPT_UNICAST_UDP_ENA 0x08
+#endif
#define I40E_AQ_VSI_QUE_OPT_TCP_ENA 0x10
#define I40E_AQ_VSI_QUE_OPT_FCOE_ENA 0x20
#ifdef X722_SUPPORT
#define I40E_AQC_SET_VSI_PROMISC_BROADCAST 0x04
#define I40E_AQC_SET_VSI_DEFAULT 0x08
#define I40E_AQC_SET_VSI_PROMISC_VLAN 0x10
+#define I40E_AQC_SET_VSI_PROMISC_TX 0x8000
__le16 seid;
#define I40E_AQC_VSI_PROM_CMD_SEID_MASK 0x3FF
__le16 vlan_tag;
#define I40E_AQC_ADD_CLOUD_TNL_TYPE_SHIFT 9
#define I40E_AQC_ADD_CLOUD_TNL_TYPE_MASK 0x1E00
-#define I40E_AQC_ADD_CLOUD_TNL_TYPE_XVLAN 0
+#define I40E_AQC_ADD_CLOUD_TNL_TYPE_VXLAN 0
#define I40E_AQC_ADD_CLOUD_TNL_TYPE_NVGRE_OMAC 1
-#define I40E_AQC_ADD_CLOUD_TNL_TYPE_NGE 2
+#define I40E_AQC_ADD_CLOUD_TNL_TYPE_GENEVE 2
#define I40E_AQC_ADD_CLOUD_TNL_TYPE_IP 3
+#define I40E_AQC_ADD_CLOUD_TNL_TYPE_RESERVED 4
+#define I40E_AQC_ADD_CLOUD_TNL_TYPE_VXLAN_GPE 5
+
+#define I40E_AQC_ADD_CLOUD_FLAGS_SHARED_OUTER_MAC 0x2000
+#define I40E_AQC_ADD_CLOUD_FLAGS_SHARED_INNER_MAC 0x4000
+#define I40E_AQC_ADD_CLOUD_FLAGS_SHARED_OUTER_IP 0x8000
__le32 tenant_id;
u8 reserved[4];
u8 config;
#define I40E_AQ_CONFIG_CRC_ENA 0x04
#define I40E_AQ_CONFIG_PACING_MASK 0x78
- u8 reserved[5];
+ u8 external_power_ability;
+#define I40E_AQ_LINK_POWER_CLASS_1 0x00
+#define I40E_AQ_LINK_POWER_CLASS_2 0x01
+#define I40E_AQ_LINK_POWER_CLASS_3 0x02
+#define I40E_AQ_LINK_POWER_CLASS_4 0x03
+ u8 reserved[4];
};
I40E_CHECK_CMD_LENGTH(i40e_aqc_get_link_status);
I40E_AQC_PHY_REG_EXERNAL_MODULE = 0x3
};
+/* Run PHY Activity (0x0626) */
+struct i40e_aqc_run_phy_activity {
+ __le16 activity_id;
+ u8 flags;
+ u8 reserved1;
+ __le32 control;
+ __le32 data;
+ u8 reserved2[4];
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_run_phy_activity);
+
/* NVM Read command (indirect 0x0701)
* NVM Erase commands (direct 0x0702)
* NVM Update commands (indirect 0x0703)
I40E_CHECK_STRUCT_LEN(0x28, i40e_aqc_nvm_oem_post_update_buffer);
+/* Thermal Sensor (indirect 0x0721)
+ * read or set thermal sensor configs and values
+ * takes a sensor and command specific data buffer, not detailed here
+ */
+struct i40e_aqc_thermal_sensor {
+ u8 sensor_action;
+#define I40E_AQ_THERMAL_SENSOR_READ_CONFIG 0
+#define I40E_AQ_THERMAL_SENSOR_SET_CONFIG 1
+#define I40E_AQ_THERMAL_SENSOR_READ_TEMP 2
+ u8 reserved[7];
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_thermal_sensor);
+
/* Send to PF command (indirect 0x0801) id is only used by PF
* Send to VF command (indirect 0x0802) id is only used by PF
* Send to Peer PF command (indirect 0x0803)
I40E_CHECK_CMD_LENGTH(i40e_aqc_lldp_set_local_mib);
+struct i40e_aqc_lldp_set_local_mib_resp {
+#define SET_LOCAL_MIB_RESP_EVENT_TRIGGERED_MASK 0x01
+ u8 status;
+ u8 reserved[15];
+};
+
+I40E_CHECK_STRUCT_LEN(0x10, i40e_aqc_lldp_set_local_mib_resp);
+
/* Stop/Start LLDP Agent (direct 0x0A09)
* Used for stopping/starting specific LLDP agent. e.g. DCBx
*/
#define I40E_AQC_TUNNEL_TYPE_VXLAN 0x00
#define I40E_AQC_TUNNEL_TYPE_NGE 0x01
#define I40E_AQC_TUNNEL_TYPE_TEREDO 0x10
+#define I40E_AQC_TUNNEL_TYPE_VXLAN_GPE 0x11
u8 reserved1[10];
};