-/*
- * BSD LICENSE
- *
- * Copyright(c) 2017 Cavium, Inc.. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Cavium, Inc. nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2017 Cavium, Inc
*/
#ifndef _LIO_STRUCT_H_
#include "lio_hw_defs.h"
+struct lio_stailq_node {
+ STAILQ_ENTRY(lio_stailq_node) entries;
+};
+
+STAILQ_HEAD(lio_stailq_head, lio_stailq_node);
+
struct lio_version {
uint16_t major;
uint16_t minor;
uint16_t reserved;
};
+/** Input Queue statistics. Each input queue has four stats fields. */
+struct lio_iq_stats {
+ uint64_t instr_posted; /**< Instructions posted to this queue. */
+ uint64_t instr_processed; /**< Instructions processed in this queue. */
+ uint64_t instr_dropped; /**< Instructions that could not be processed */
+ uint64_t bytes_sent; /**< Bytes sent through this queue. */
+ uint64_t tx_done; /**< Num of packets sent to network. */
+ uint64_t tx_iq_busy; /**< Num of times this iq was found to be full. */
+ uint64_t tx_dropped; /**< Num of pkts dropped due to xmitpath errors. */
+ uint64_t tx_tot_bytes; /**< Total count of bytes sent to network. */
+};
+
+/** Output Queue statistics. Each output queue has four stats fields. */
+struct lio_droq_stats {
+ /** Number of packets received in this queue. */
+ uint64_t pkts_received;
+
+ /** Bytes received by this queue. */
+ uint64_t bytes_received;
+
+ /** Packets dropped due to no memory available. */
+ uint64_t dropped_nomem;
+
+ /** Packets dropped due to large number of pkts to process. */
+ uint64_t dropped_toomany;
+
+ /** Number of packets sent to stack from this queue. */
+ uint64_t rx_pkts_received;
+
+ /** Number of Bytes sent to stack from this queue. */
+ uint64_t rx_bytes_received;
+
+ /** Num of Packets dropped due to receive path failures. */
+ uint64_t rx_dropped;
+
+ /** Num of vxlan packets received; */
+ uint64_t rx_vxlan;
+
+ /** Num of failures of rte_pktmbuf_alloc() */
+ uint64_t rx_alloc_failure;
+
+};
+
+/** The Descriptor Ring Output Queue structure.
+ * This structure has all the information required to implement a
+ * DROQ.
+ */
+struct lio_droq {
+ /** A spinlock to protect access to this ring. */
+ rte_spinlock_t lock;
+
+ uint32_t q_no;
+
+ uint32_t pkt_count;
+
+ struct lio_device *lio_dev;
+
+ /** The 8B aligned descriptor ring starts at this address. */
+ struct lio_droq_desc *desc_ring;
+
+ /** Index in the ring where the driver should read the next packet */
+ uint32_t read_idx;
+
+ /** Index in the ring where Octeon will write the next packet */
+ uint32_t write_idx;
+
+ /** Index in the ring where the driver will refill the descriptor's
+ * buffer
+ */
+ uint32_t refill_idx;
+
+ /** Packets pending to be processed */
+ rte_atomic64_t pkts_pending;
+
+ /** Number of descriptors in this ring. */
+ uint32_t nb_desc;
+
+ /** The number of descriptors pending refill. */
+ uint32_t refill_count;
+
+ uint32_t refill_threshold;
+
+ /** The 8B aligned info ptrs begin from this address. */
+ struct lio_droq_info *info_list;
+
+ /** The receive buffer list. This list has the virtual addresses of the
+ * buffers.
+ */
+ struct lio_recv_buffer *recv_buf_list;
+
+ /** The size of each buffer pointed by the buffer pointer. */
+ uint32_t buffer_size;
+
+ /** Pointer to the mapped packet credit register.
+ * Host writes number of info/buffer ptrs available to this register
+ */
+ void *pkts_credit_reg;
+
+ /** Pointer to the mapped packet sent register.
+ * Octeon writes the number of packets DMA'ed to host memory
+ * in this register.
+ */
+ void *pkts_sent_reg;
+
+ /** Statistics for this DROQ. */
+ struct lio_droq_stats stats;
+
+ /** DMA mapped address of the DROQ descriptor ring. */
+ size_t desc_ring_dma;
+
+ /** Info ptr list are allocated at this virtual address. */
+ size_t info_base_addr;
+
+ /** DMA mapped address of the info list */
+ size_t info_list_dma;
+
+ /** Allocated size of info list. */
+ uint32_t info_alloc_size;
+
+ /** Memory zone **/
+ const struct rte_memzone *desc_ring_mz;
+ const struct rte_memzone *info_mz;
+ struct rte_mempool *mpool;
+};
+
+/** Receive Header */
+union octeon_rh {
+#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+ uint64_t rh64;
+ struct {
+ uint64_t opcode : 4;
+ uint64_t subcode : 8;
+ uint64_t len : 3; /** additional 64-bit words */
+ uint64_t reserved : 17;
+ uint64_t ossp : 32; /** opcode/subcode specific parameters */
+ } r;
+ struct {
+ uint64_t opcode : 4;
+ uint64_t subcode : 8;
+ uint64_t len : 3; /** additional 64-bit words */
+ uint64_t extra : 28;
+ uint64_t vlan : 12;
+ uint64_t priority : 3;
+ uint64_t csum_verified : 3; /** checksum verified. */
+ uint64_t has_hwtstamp : 1; /** Has hardware timestamp.1 = yes.*/
+ uint64_t encap_on : 1;
+ uint64_t has_hash : 1; /** Has hash (rth or rss). 1 = yes. */
+ } r_dh;
+ struct {
+ uint64_t opcode : 4;
+ uint64_t subcode : 8;
+ uint64_t len : 3; /** additional 64-bit words */
+ uint64_t reserved : 8;
+ uint64_t extra : 25;
+ uint64_t gmxport : 16;
+ } r_nic_info;
+#else
+ uint64_t rh64;
+ struct {
+ uint64_t ossp : 32; /** opcode/subcode specific parameters */
+ uint64_t reserved : 17;
+ uint64_t len : 3; /** additional 64-bit words */
+ uint64_t subcode : 8;
+ uint64_t opcode : 4;
+ } r;
+ struct {
+ uint64_t has_hash : 1; /** Has hash (rth or rss). 1 = yes. */
+ uint64_t encap_on : 1;
+ uint64_t has_hwtstamp : 1; /** 1 = has hwtstamp */
+ uint64_t csum_verified : 3; /** checksum verified. */
+ uint64_t priority : 3;
+ uint64_t vlan : 12;
+ uint64_t extra : 28;
+ uint64_t len : 3; /** additional 64-bit words */
+ uint64_t subcode : 8;
+ uint64_t opcode : 4;
+ } r_dh;
+ struct {
+ uint64_t gmxport : 16;
+ uint64_t extra : 25;
+ uint64_t reserved : 8;
+ uint64_t len : 3; /** additional 64-bit words */
+ uint64_t subcode : 8;
+ uint64_t opcode : 4;
+ } r_nic_info;
+#endif
+};
+
+#define OCTEON_RH_SIZE (sizeof(union octeon_rh))
+
/** The txpciq info passed to host from the firmware */
union octeon_txpciq {
uint64_t txpciq64;
uint32_t status:8;
- /** Maximum no. of instructions in this queue. */
- uint32_t max_count;
+ /** Number of descriptors in this ring. */
+ uint32_t nb_desc;
/** Index in input ring where the driver should write the next packet */
uint32_t host_write_index;
/** Number of instructions pending to be posted to Octeon. */
uint32_t fill_cnt;
+ /** Statistics for this input queue. */
+ struct lio_iq_stats stats;
+
/** DMA mapped base address of the input descriptor ring. */
uint64_t base_addr_dma;
const struct rte_memzone *iq_mz;
};
+/** This structure is used by driver to store information required
+ * to free the mbuff when the packet has been fetched by Octeon.
+ * Bytes offset below assume worst-case of a 64-bit system.
+ */
+struct lio_buf_free_info {
+ /** Bytes 1-8. Pointer to network device private structure. */
+ struct lio_device *lio_dev;
+
+ /** Bytes 9-16. Pointer to mbuff. */
+ struct rte_mbuf *mbuf;
+
+ /** Bytes 17-24. Pointer to gather list. */
+ struct lio_gather *g;
+
+ /** Bytes 25-32. Physical address of mbuf->data or gather list. */
+ uint64_t dptr;
+
+ /** Bytes 33-47. Piggybacked soft command, if any */
+ struct lio_soft_command *sc;
+
+ /** Bytes 48-63. iq no */
+ uint64_t iq_no;
+};
+
+/* The Scatter-Gather List Entry. The scatter or gather component used with
+ * input instruction has this format.
+ */
+struct lio_sg_entry {
+ /** The first 64 bit gives the size of data in each dptr. */
+ union {
+ uint16_t size[4];
+ uint64_t size64;
+ } u;
+
+ /** The 4 dptr pointers for this entry. */
+ uint64_t ptr[4];
+};
+
+#define LIO_SG_ENTRY_SIZE (sizeof(struct lio_sg_entry))
+
+/** Structure of a node in list of gather components maintained by
+ * driver for each network device.
+ */
+struct lio_gather {
+ /** List manipulation. Next and prev pointers. */
+ struct lio_stailq_node list;
+
+ /** Size of the gather component at sg in bytes. */
+ int sg_size;
+
+ /** Number of bytes that sg was adjusted to make it 8B-aligned. */
+ int adjust;
+
+ /** Gather component that can accommodate max sized fragment list
+ * received from the IP layer.
+ */
+ struct lio_sg_entry *sg;
+};
+
+struct lio_rss_ctx {
+ uint16_t hash_key_size;
+ uint8_t hash_key[LIO_RSS_MAX_KEY_SZ];
+ /* Ideally a factor of number of queues */
+ uint8_t itable[LIO_RSS_MAX_TABLE_SZ];
+ uint8_t itable_size;
+ uint8_t ip;
+ uint8_t tcp_hash;
+ uint8_t ipv6;
+ uint8_t ipv6_tcp_hash;
+ uint8_t ipv6_ex;
+ uint8_t ipv6_tcp_ex_hash;
+ uint8_t hash_disable;
+};
+
struct lio_io_enable {
uint64_t iq;
uint64_t oq;
struct lio_fn_list {
void (*setup_iq_regs)(struct lio_device *, uint32_t);
+ void (*setup_oq_regs)(struct lio_device *, uint32_t);
int (*setup_mbox)(struct lio_device *);
void (*free_mbox)(struct lio_device *);
int (*setup_device_regs)(struct lio_device *);
+ int (*enable_io_queues)(struct lio_device *);
+ void (*disable_io_queues)(struct lio_device *);
};
struct lio_pf_vf_hs_word {
uint32_t num_vfs;
};
+/* Head of a response list */
+struct lio_response_list {
+ /** List structure to add delete pending entries to */
+ struct lio_stailq_head head;
+
+ /** A lock for this response list */
+ rte_spinlock_t lock;
+
+ rte_atomic64_t pending_req_count;
+};
+
/* Structure to define the configuration attributes for each Input queue. */
struct lio_iq_config {
/* Max number of IQs available */
int def_rx_buf_size;
};
+/** Status of a RGMII Link on Octeon as seen by core driver. */
+union octeon_link_status {
+ uint64_t link_status64;
+
+ struct {
+#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+ uint64_t duplex : 8;
+ uint64_t mtu : 16;
+ uint64_t speed : 16;
+ uint64_t link_up : 1;
+ uint64_t autoneg : 1;
+ uint64_t if_mode : 5;
+ uint64_t pause : 1;
+ uint64_t flashing : 1;
+ uint64_t reserved : 15;
+#else
+ uint64_t reserved : 15;
+ uint64_t flashing : 1;
+ uint64_t pause : 1;
+ uint64_t if_mode : 5;
+ uint64_t autoneg : 1;
+ uint64_t link_up : 1;
+ uint64_t speed : 16;
+ uint64_t mtu : 16;
+ uint64_t duplex : 8;
+#endif
+ } s;
+};
+
+/** The rxpciq info passed to host from the firmware */
+union octeon_rxpciq {
+ uint64_t rxpciq64;
+
+ struct {
+#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+ uint64_t q_no : 8;
+ uint64_t reserved : 56;
+#else
+ uint64_t reserved : 56;
+ uint64_t q_no : 8;
+#endif
+ } s;
+};
+
+/** Information for a OCTEON ethernet interface shared between core & host. */
+struct octeon_link_info {
+ union octeon_link_status link;
+ uint64_t hw_addr;
+
+#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+ uint64_t gmxport : 16;
+ uint64_t macaddr_is_admin_assigned : 1;
+ uint64_t vlan_is_admin_assigned : 1;
+ uint64_t rsvd : 30;
+ uint64_t num_txpciq : 8;
+ uint64_t num_rxpciq : 8;
+#else
+ uint64_t num_rxpciq : 8;
+ uint64_t num_txpciq : 8;
+ uint64_t rsvd : 30;
+ uint64_t vlan_is_admin_assigned : 1;
+ uint64_t macaddr_is_admin_assigned : 1;
+ uint64_t gmxport : 16;
+#endif
+
+ union octeon_txpciq txpciq[LIO_MAX_IOQS_PER_IF];
+ union octeon_rxpciq rxpciq[LIO_MAX_IOQS_PER_IF];
+};
+
/* ----------------------- THE LIO DEVICE --------------------------- */
/** The lio device.
* Each lio device has this structure to represent all its
uint16_t pf_num;
uint16_t vf_num;
+ /** This device's PCIe port used for traffic. */
+ uint16_t pcie_port;
+
+ /** The state of this device */
+ rte_atomic64_t status;
+
+ uint8_t intf_open;
+
+ struct octeon_link_info linfo;
+
uint8_t *hw_addr;
struct lio_fn_list fn_list;
uint32_t num_iqs;
+ /** Guards each glist */
+ rte_spinlock_t *glist_lock;
+ /** Array of gather component linked lists */
+ struct lio_stailq_head *glist_head;
+
+ /* The pool containing pre allocated buffers used for soft commands */
+ struct rte_mempool *sc_buf_pool;
+
/** The input instruction queues */
struct lio_instr_queue *instr_queue[LIO_MAX_POSSIBLE_INSTR_QUEUES];
+ /** The singly-linked tail queues of instruction response */
+ struct lio_response_list response_list;
+
+ uint32_t num_oqs;
+
+ /** The DROQ output queues */
+ struct lio_droq *droq[LIO_MAX_POSSIBLE_OUTPUT_QUEUES];
+
struct lio_io_enable io_qmask;
struct lio_sriov_info sriov_info;
struct rte_eth_dev *eth_dev;
+ uint64_t ifflags;
uint8_t max_rx_queues;
uint8_t max_tx_queues;
uint8_t nb_rx_queues;
uint8_t nb_tx_queues;
uint8_t port_configured;
- uint8_t port_id;
+ struct lio_rss_ctx rss_state;
+ uint16_t port_id;
+ char firmware_version[LIO_FW_VERSION_LENGTH];
};
#endif /* _LIO_STRUCT_H_ */