#include <rte_spinlock.h>
#include <rte_service_component.h>
+#include "eal_firmware.h"
+
#include "nfpcore/nfp_cpp.h"
#include "nfpcore/nfp_nffw.h"
#include "nfpcore/nfp_hwinfo.h"
#include "nfpcore/nfp_nsp.h"
#include "nfp_net_pmd.h"
+#include "nfp_rxtx.h"
#include "nfp_net_logs.h"
#include "nfp_net_ctrl.h"
+#include "nfp_cpp_bridge.h"
#include <sys/types.h>
#include <sys/socket.h>
/* Prototypes */
static int nfp_net_close(struct rte_eth_dev *dev);
-static int nfp_net_configure(struct rte_eth_dev *dev);
-static void nfp_net_dev_interrupt_handler(void *param);
-static void nfp_net_dev_interrupt_delayed_handler(void *param);
-static int nfp_net_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
-static int nfp_net_infos_get(struct rte_eth_dev *dev,
- struct rte_eth_dev_info *dev_info);
static int nfp_net_init(struct rte_eth_dev *eth_dev);
-static int nfp_net_link_update(struct rte_eth_dev *dev, int wait_to_complete);
-static int nfp_net_promisc_enable(struct rte_eth_dev *dev);
-static int nfp_net_promisc_disable(struct rte_eth_dev *dev);
-static int nfp_net_rx_fill_freelist(struct nfp_net_rxq *rxq);
-static uint32_t nfp_net_rx_queue_count(struct rte_eth_dev *dev,
- uint16_t queue_idx);
-static uint16_t nfp_net_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
- uint16_t nb_pkts);
-static void nfp_net_rx_queue_release(void *rxq);
-static int nfp_net_rx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
- uint16_t nb_desc, unsigned int socket_id,
- const struct rte_eth_rxconf *rx_conf,
- struct rte_mempool *mp);
-static int nfp_net_tx_free_bufs(struct nfp_net_txq *txq);
-static void nfp_net_tx_queue_release(void *txq);
-static int nfp_net_tx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
- uint16_t nb_desc, unsigned int socket_id,
- const struct rte_eth_txconf *tx_conf);
-static int nfp_net_start(struct rte_eth_dev *dev);
-static int nfp_net_stats_get(struct rte_eth_dev *dev,
- struct rte_eth_stats *stats);
-static int nfp_net_stats_reset(struct rte_eth_dev *dev);
+static int nfp_pf_init(struct rte_pci_device *pci_dev);
+static int nfp_pf_secondary_init(struct rte_pci_device *pci_dev);
+static int nfp_net_pf_read_mac(struct nfp_pf_dev *pf_dev, int port);
+static int nfp_pci_uninit(struct rte_eth_dev *eth_dev);
+static int nfp_init_phyports(struct nfp_pf_dev *pf_dev);
static int nfp_net_stop(struct rte_eth_dev *dev);
-static uint16_t nfp_net_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
- uint16_t nb_pkts);
-
-static int nfp_net_rss_config_default(struct rte_eth_dev *dev);
-static int nfp_net_rss_hash_update(struct rte_eth_dev *dev,
- struct rte_eth_rss_conf *rss_conf);
-static int nfp_net_rss_reta_write(struct rte_eth_dev *dev,
- struct rte_eth_rss_reta_entry64 *reta_conf,
- uint16_t reta_size);
-static int nfp_net_rss_hash_write(struct rte_eth_dev *dev,
- struct rte_eth_rss_conf *rss_conf);
-static int nfp_set_mac_addr(struct rte_eth_dev *dev,
- struct rte_ether_addr *mac_addr);
-
-/* The offset of the queue controller queues in the PCIe Target */
-#define NFP_PCIE_QUEUE(_q) (0x80000 + (NFP_QCP_QUEUE_ADDR_SZ * ((_q) & 0xff)))
-
-/* Maximum value which can be added to a queue with one transaction */
-#define NFP_QCP_MAX_ADD 0x7f
-
-#define RTE_MBUF_DMA_ADDR_DEFAULT(mb) \
- (uint64_t)((mb)->buf_iova + RTE_PKTMBUF_HEADROOM)
-
-/* nfp_qcp_ptr - Read or Write Pointer of a queue */
-enum nfp_qcp_ptr {
- NFP_QCP_READ_PTR = 0,
- NFP_QCP_WRITE_PTR
-};
-
-/*
- * nfp_qcp_ptr_add - Add the value to the selected pointer of a queue
- * @q: Base address for queue structure
- * @ptr: Add to the Read or Write pointer
- * @val: Value to add to the queue pointer
- *
- * If @val is greater than @NFP_QCP_MAX_ADD multiple writes are performed.
- */
-static inline void
-nfp_qcp_ptr_add(uint8_t *q, enum nfp_qcp_ptr ptr, uint32_t val)
-{
- uint32_t off;
-
- if (ptr == NFP_QCP_READ_PTR)
- off = NFP_QCP_QUEUE_ADD_RPTR;
- else
- off = NFP_QCP_QUEUE_ADD_WPTR;
-
- while (val > NFP_QCP_MAX_ADD) {
- nn_writel(rte_cpu_to_le_32(NFP_QCP_MAX_ADD), q + off);
- val -= NFP_QCP_MAX_ADD;
- }
-
- nn_writel(rte_cpu_to_le_32(val), q + off);
-}
-
-/*
- * nfp_qcp_read - Read the current Read/Write pointer value for a queue
- * @q: Base address for queue structure
- * @ptr: Read or Write pointer
- */
-static inline uint32_t
-nfp_qcp_read(uint8_t *q, enum nfp_qcp_ptr ptr)
-{
- uint32_t off;
- uint32_t val;
-
- if (ptr == NFP_QCP_READ_PTR)
- off = NFP_QCP_QUEUE_STS_LO;
- else
- off = NFP_QCP_QUEUE_STS_HI;
-
- val = rte_cpu_to_le_32(nn_readl(q + off));
-
- if (ptr == NFP_QCP_READ_PTR)
- return val & NFP_QCP_QUEUE_STS_LO_READPTR_mask;
- else
- return val & NFP_QCP_QUEUE_STS_HI_WRITEPTR_mask;
-}
-
-/*
- * Functions to read/write from/to Config BAR
- * Performs any endian conversion necessary.
- */
-static inline uint8_t
-nn_cfg_readb(struct nfp_net_hw *hw, int off)
-{
- return nn_readb(hw->ctrl_bar + off);
-}
-
-static inline void
-nn_cfg_writeb(struct nfp_net_hw *hw, int off, uint8_t val)
-{
- nn_writeb(val, hw->ctrl_bar + off);
-}
-
-static inline uint32_t
-nn_cfg_readl(struct nfp_net_hw *hw, int off)
-{
- return rte_le_to_cpu_32(nn_readl(hw->ctrl_bar + off));
-}
-
-static inline void
-nn_cfg_writel(struct nfp_net_hw *hw, int off, uint32_t val)
-{
- nn_writel(rte_cpu_to_le_32(val), hw->ctrl_bar + off);
-}
-
-static inline uint64_t
-nn_cfg_readq(struct nfp_net_hw *hw, int off)
-{
- return rte_le_to_cpu_64(nn_readq(hw->ctrl_bar + off));
-}
-
-static inline void
-nn_cfg_writeq(struct nfp_net_hw *hw, int off, uint64_t val)
-{
- nn_writeq(rte_cpu_to_le_64(val), hw->ctrl_bar + off);
-}
-
-static void
-nfp_net_rx_queue_release_mbufs(struct nfp_net_rxq *rxq)
-{
- unsigned i;
-
- if (rxq->rxbufs == NULL)
- return;
-
- for (i = 0; i < rxq->rx_count; i++) {
- if (rxq->rxbufs[i].mbuf) {
- rte_pktmbuf_free_seg(rxq->rxbufs[i].mbuf);
- rxq->rxbufs[i].mbuf = NULL;
- }
- }
-}
-
-static void
-nfp_net_rx_queue_release(void *rx_queue)
-{
- struct nfp_net_rxq *rxq = rx_queue;
-
- if (rxq) {
- nfp_net_rx_queue_release_mbufs(rxq);
- rte_free(rxq->rxbufs);
- rte_free(rxq);
- }
-}
-
-static void
-nfp_net_reset_rx_queue(struct nfp_net_rxq *rxq)
-{
- nfp_net_rx_queue_release_mbufs(rxq);
- rxq->rd_p = 0;
- rxq->nb_rx_hold = 0;
-}
-
-static void
-nfp_net_tx_queue_release_mbufs(struct nfp_net_txq *txq)
-{
- unsigned i;
-
- if (txq->txbufs == NULL)
- return;
-
- for (i = 0; i < txq->tx_count; i++) {
- if (txq->txbufs[i].mbuf) {
- rte_pktmbuf_free_seg(txq->txbufs[i].mbuf);
- txq->txbufs[i].mbuf = NULL;
- }
- }
-}
-
-static void
-nfp_net_tx_queue_release(void *tx_queue)
-{
- struct nfp_net_txq *txq = tx_queue;
-
- if (txq) {
- nfp_net_tx_queue_release_mbufs(txq);
- rte_free(txq->txbufs);
- rte_free(txq);
- }
-}
-
-static void
-nfp_net_reset_tx_queue(struct nfp_net_txq *txq)
-{
- nfp_net_tx_queue_release_mbufs(txq);
- txq->wr_p = 0;
- txq->rd_p = 0;
-}
+static int nfp_fw_setup(struct rte_pci_device *dev,
+ struct nfp_cpp *cpp,
+ struct nfp_eth_table *nfp_eth_table,
+ struct nfp_hwinfo *hwinfo);
static int
__nfp_net_reconfig(struct nfp_net_hw *hw, uint32_t update)
* Write the update word to the BAR and ping the reconfig queue. Then poll
* until the firmware has acknowledged the update by zeroing the update word.
*/
-static int
+int
nfp_net_reconfig(struct nfp_net_hw *hw, uint32_t ctrl, uint32_t update)
{
uint32_t err;
* before any other function in the Ethernet API. This function can
* also be re-invoked when a device is in the stopped state.
*/
-static int
+int
nfp_net_configure(struct rte_eth_dev *dev)
{
struct rte_eth_conf *dev_conf;
return 0;
}
-static void
+void
nfp_net_enable_queues(struct rte_eth_dev *dev)
{
struct nfp_net_hw *hw;
nn_cfg_writeq(hw, NFP_NET_CFG_RXRS_ENABLE, enabled_queues);
}
-static void
+void
nfp_net_disable_queues(struct rte_eth_dev *dev)
{
struct nfp_net_hw *hw;
hw->ctrl = new_ctrl;
}
-static int
-nfp_net_rx_freelist_setup(struct rte_eth_dev *dev)
-{
- int i;
-
- for (i = 0; i < dev->data->nb_rx_queues; i++) {
- if (nfp_net_rx_fill_freelist(dev->data->rx_queues[i]) < 0)
- return -1;
- }
- return 0;
-}
-
-static void
+void
nfp_net_params_setup(struct nfp_net_hw *hw)
{
nn_cfg_writel(hw, NFP_NET_CFG_MTU, hw->mtu);
nn_cfg_writel(hw, NFP_NET_CFG_FLBUFSZ, hw->flbufsz);
}
-static void
+void
nfp_net_cfg_queue_setup(struct nfp_net_hw *hw)
{
hw->qcp_cfg = hw->tx_bar + NFP_QCP_QUEUE_ADDR_SZ;
#define ETH_ADDR_LEN 6
-static void
+void
nfp_eth_copy_mac(uint8_t *dst, const uint8_t *src)
{
int i;
}
static int
-nfp_net_pf_read_mac(struct nfp_net_hw *hw, int port)
+nfp_net_pf_read_mac(struct nfp_pf_dev *pf_dev, int port)
{
struct nfp_eth_table *nfp_eth_table;
+ struct nfp_net_hw *hw = NULL;
+
+ /* Grab a pointer to the correct physical port */
+ hw = pf_dev->ports[port];
+
+ nfp_eth_table = nfp_eth_read_ports(pf_dev->cpp);
- nfp_eth_table = nfp_eth_read_ports(hw->cpp);
- /*
- * hw points to port0 private data. We need hw now pointing to
- * right port.
- */
- hw += port;
nfp_eth_copy_mac((uint8_t *)&hw->mac_addr,
(uint8_t *)&nfp_eth_table->ports[port].mac_addr);
return 0;
}
-static void
-nfp_net_vf_read_mac(struct nfp_net_hw *hw)
-{
- uint32_t tmp;
-
- tmp = rte_be_to_cpu_32(nn_cfg_readl(hw, NFP_NET_CFG_MACADDR));
- memcpy(&hw->mac_addr[0], &tmp, 4);
-
- tmp = rte_be_to_cpu_32(nn_cfg_readl(hw, NFP_NET_CFG_MACADDR + 4));
- memcpy(&hw->mac_addr[4], &tmp, 2);
-}
-
-static void
+void
nfp_net_write_mac(struct nfp_net_hw *hw, uint8_t *mac)
{
uint32_t mac0 = *(uint32_t *)mac;
return 0;
}
-static int
+int
nfp_configure_rx_interrupt(struct rte_eth_dev *dev,
struct rte_intr_handle *intr_handle)
{
return 0;
}
-static uint32_t
+uint32_t
nfp_check_offloads(struct rte_eth_dev *dev)
{
struct nfp_net_hw *hw;
struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
uint32_t new_ctrl, update = 0;
struct nfp_net_hw *hw;
+ struct nfp_pf_dev *pf_dev;
struct rte_eth_conf *dev_conf;
struct rte_eth_rxmode *rxmode;
uint32_t intr_vector;
int ret;
hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ pf_dev = NFP_NET_DEV_PRIVATE_TO_PF(dev->data->dev_private);
PMD_INIT_LOG(DEBUG, "Start");
/* check and configure queue intr-vector mapping */
if (dev->data->dev_conf.intr_conf.rxq != 0) {
- if (hw->pf_multiport_enabled) {
+ if (pf_dev->multiport) {
PMD_INIT_LOG(ERR, "PMD rx interrupt is not supported "
"with NFP multiport PF");
return -EINVAL;
goto error;
}
- if (hw->is_pf) {
+ if (hw->is_phyport) {
if (rte_eal_process_type() == RTE_PROC_PRIMARY)
/* Configure the physical port up */
- nfp_eth_set_configured(hw->cpp, hw->pf_port_idx, 1);
+ nfp_eth_set_configured(hw->cpp, hw->nfp_idx, 1);
else
nfp_eth_set_configured(dev->process_private,
- hw->pf_port_idx, 1);
+ hw->nfp_idx, 1);
}
hw->ctrl = new_ctrl;
(struct nfp_net_rxq *)dev->data->rx_queues[i]);
}
- if (hw->is_pf) {
+ if (hw->is_phyport) {
if (rte_eal_process_type() == RTE_PROC_PRIMARY)
/* Configure the physical port down */
- nfp_eth_set_configured(hw->cpp, hw->pf_port_idx, 0);
+ nfp_eth_set_configured(hw->cpp, hw->nfp_idx, 0);
else
nfp_eth_set_configured(dev->process_private,
- hw->pf_port_idx, 0);
+ hw->nfp_idx, 0);
}
return 0;
hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- if (!hw->is_pf)
+ if (!hw->is_phyport)
return -ENOTSUP;
if (rte_eal_process_type() == RTE_PROC_PRIMARY)
/* Configure the physical port down */
- return nfp_eth_set_configured(hw->cpp, hw->pf_port_idx, 1);
+ return nfp_eth_set_configured(hw->cpp, hw->nfp_idx, 1);
else
return nfp_eth_set_configured(dev->process_private,
- hw->pf_port_idx, 1);
+ hw->nfp_idx, 1);
}
/* Set the link down. */
hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- if (!hw->is_pf)
+ if (!hw->is_phyport)
return -ENOTSUP;
if (rte_eal_process_type() == RTE_PROC_PRIMARY)
/* Configure the physical port down */
- return nfp_eth_set_configured(hw->cpp, hw->pf_port_idx, 0);
+ return nfp_eth_set_configured(hw->cpp, hw->nfp_idx, 0);
else
return nfp_eth_set_configured(dev->process_private,
- hw->pf_port_idx, 0);
+ hw->nfp_idx, 0);
}
/* Reset and stop device. The device can not be restarted. */
(struct nfp_net_rxq *)dev->data->rx_queues[i]);
}
+ /* Only free PF resources after all physical ports have been closed */
+ if (pci_dev->id.device_id == PCI_DEVICE_ID_NFP4000_PF_NIC ||
+ pci_dev->id.device_id == PCI_DEVICE_ID_NFP6000_PF_NIC) {
+ struct nfp_pf_dev *pf_dev;
+ pf_dev = NFP_NET_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+
+ /* Mark this port as unused and free device priv resources*/
+ nn_cfg_writeb(hw, NFP_NET_CFG_LSC, 0xff);
+ pf_dev->ports[hw->idx] = NULL;
+ rte_eth_dev_release_port(dev);
+
+ for (i = 0; i < pf_dev->total_phyports; i++) {
+ /* Check to see if ports are still in use */
+ if (pf_dev->ports[i])
+ return 0;
+ }
+
+ /* Now it is safe to free all PF resources */
+ PMD_INIT_LOG(INFO, "Freeing PF resources");
+ nfp_cpp_area_free(pf_dev->ctrl_area);
+ nfp_cpp_area_free(pf_dev->hwqueues_area);
+ free(pf_dev->hwinfo);
+ free(pf_dev->sym_tbl);
+ nfp_cpp_free(pf_dev->cpp);
+ rte_free(pf_dev);
+ }
+
rte_intr_disable(&pci_dev->intr_handle);
- nn_cfg_writeb(hw, NFP_NET_CFG_LSC, 0xff);
/* unregister callback func from eal lib */
rte_intr_callback_unregister(&pci_dev->intr_handle,
return 0;
}
-static int
+int
nfp_net_promisc_enable(struct rte_eth_dev *dev)
{
uint32_t new_ctrl, update = 0;
return 0;
}
-static int
+int
nfp_net_promisc_disable(struct rte_eth_dev *dev)
{
uint32_t new_ctrl, update = 0;
* Wait to complete is needed as it can take up to 9 seconds to get the Link
* status.
*/
-static int
+int
nfp_net_link_update(struct rte_eth_dev *dev, __rte_unused int wait_to_complete)
{
struct nfp_net_hw *hw;
return ret;
}
-static int
+int
nfp_net_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
{
int i;
return -EINVAL;
}
-static int
+int
nfp_net_stats_reset(struct rte_eth_dev *dev)
{
int i;
return 0;
}
-static int
+int
nfp_net_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
{
struct nfp_net_hw *hw;
DEV_RX_OFFLOAD_UDP_CKSUM |
DEV_RX_OFFLOAD_TCP_CKSUM;
- dev_info->rx_offload_capa |= DEV_RX_OFFLOAD_JUMBO_FRAME |
- DEV_RX_OFFLOAD_RSS_HASH;
-
if (hw->cap & NFP_NET_CFG_CTRL_TXVLAN)
dev_info->tx_offload_capa = DEV_TX_OFFLOAD_VLAN_INSERT;
.nb_mtu_seg_max = NFP_TX_MAX_MTU_SEG,
};
- dev_info->flow_type_rss_offloads = ETH_RSS_IPV4 |
- ETH_RSS_NONFRAG_IPV4_TCP |
- ETH_RSS_NONFRAG_IPV4_UDP |
- ETH_RSS_IPV6 |
- ETH_RSS_NONFRAG_IPV6_TCP |
- ETH_RSS_NONFRAG_IPV6_UDP;
+ /* All NFP devices support jumbo frames */
+ dev_info->rx_offload_capa |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+
+ if (hw->cap & NFP_NET_CFG_CTRL_RSS) {
+ dev_info->rx_offload_capa |= DEV_RX_OFFLOAD_RSS_HASH;
- dev_info->reta_size = NFP_NET_CFG_RSS_ITBL_SZ;
- dev_info->hash_key_size = NFP_NET_CFG_RSS_KEY_SZ;
+ dev_info->flow_type_rss_offloads = ETH_RSS_IPV4 |
+ ETH_RSS_NONFRAG_IPV4_TCP |
+ ETH_RSS_NONFRAG_IPV4_UDP |
+ ETH_RSS_IPV6 |
+ ETH_RSS_NONFRAG_IPV6_TCP |
+ ETH_RSS_NONFRAG_IPV6_UDP;
+
+ dev_info->reta_size = NFP_NET_CFG_RSS_ITBL_SZ;
+ dev_info->hash_key_size = NFP_NET_CFG_RSS_KEY_SZ;
+ }
dev_info->speed_capa = ETH_LINK_SPEED_1G | ETH_LINK_SPEED_10G |
ETH_LINK_SPEED_25G | ETH_LINK_SPEED_40G |
return 0;
}
-static const uint32_t *
+const uint32_t *
nfp_net_supported_ptypes_get(struct rte_eth_dev *dev)
{
static const uint32_t ptypes[] = {
return NULL;
}
-static uint32_t
-nfp_net_rx_queue_count(struct rte_eth_dev *dev, uint16_t queue_idx)
-{
- struct nfp_net_rxq *rxq;
- struct nfp_net_rx_desc *rxds;
- uint32_t idx;
- uint32_t count;
-
- rxq = (struct nfp_net_rxq *)dev->data->rx_queues[queue_idx];
-
- idx = rxq->rd_p;
-
- count = 0;
-
- /*
- * Other PMDs are just checking the DD bit in intervals of 4
- * descriptors and counting all four if the first has the DD
- * bit on. Of course, this is not accurate but can be good for
- * performance. But ideally that should be done in descriptors
- * chunks belonging to the same cache line
- */
-
- while (count < rxq->rx_count) {
- rxds = &rxq->rxds[idx];
- if ((rxds->rxd.meta_len_dd & PCIE_DESC_RX_DD) == 0)
- break;
-
- count++;
- idx++;
-
- /* Wrapping? */
- if ((idx) == rxq->rx_count)
- idx = 0;
- }
-
- return count;
-}
-
-static int
+int
nfp_rx_queue_intr_enable(struct rte_eth_dev *dev, uint16_t queue_id)
{
struct rte_pci_device *pci_dev;
return 0;
}
-static int
+int
nfp_rx_queue_intr_disable(struct rte_eth_dev *dev, uint16_t queue_id)
{
struct rte_pci_device *pci_dev;
}
}
+/*
+ * Interrupt handler which shall be registered for alarm callback for delayed
+ * handling specific interrupt to wait for the stable nic state. As the NIC
+ * interrupt state is not stable for nfp after link is just down, it needs
+ * to wait 4 seconds to get the stable status.
+ *
+ * @param handle Pointer to interrupt handle.
+ * @param param The address of parameter (struct rte_eth_dev *)
+ *
+ * @return void
+ */
static void
+nfp_net_dev_interrupt_delayed_handler(void *param)
+{
+ struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
+
+ nfp_net_link_update(dev, 0);
+ rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL);
+
+ nfp_net_dev_link_status_print(dev);
+
+ /* Unmasking */
+ nfp_net_irq_unmask(dev);
+}
+
+void
nfp_net_dev_interrupt_handler(void *param)
{
int64_t timeout;
}
}
-/*
- * Interrupt handler which shall be registered for alarm callback for delayed
- * handling specific interrupt to wait for the stable nic state. As the NIC
- * interrupt state is not stable for nfp after link is just down, it needs
- * to wait 4 seconds to get the stable status.
- *
- * @param handle Pointer to interrupt handle.
- * @param param The address of parameter (struct rte_eth_dev *)
- *
- * @return void
- */
-static void
-nfp_net_dev_interrupt_delayed_handler(void *param)
-{
- struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
-
- nfp_net_link_update(dev, 0);
- rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL);
-
- nfp_net_dev_link_status_print(dev);
-
- /* Unmasking */
- nfp_net_irq_unmask(dev);
-}
-
-static int
+int
nfp_net_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
{
struct nfp_net_hw *hw;
return 0;
}
-static int
-nfp_net_rx_queue_setup(struct rte_eth_dev *dev,
- uint16_t queue_idx, uint16_t nb_desc,
- unsigned int socket_id,
- const struct rte_eth_rxconf *rx_conf,
- struct rte_mempool *mp)
+int
+nfp_net_vlan_offload_set(struct rte_eth_dev *dev, int mask)
{
- const struct rte_memzone *tz;
- struct nfp_net_rxq *rxq;
+ uint32_t new_ctrl, update;
struct nfp_net_hw *hw;
- uint32_t rx_desc_sz;
+ int ret;
hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ new_ctrl = 0;
- PMD_INIT_FUNC_TRACE();
-
- /* Validating number of descriptors */
- rx_desc_sz = nb_desc * sizeof(struct nfp_net_rx_desc);
- if (rx_desc_sz % NFP_ALIGN_RING_DESC != 0 ||
- nb_desc > NFP_NET_MAX_RX_DESC ||
- nb_desc < NFP_NET_MIN_RX_DESC) {
- PMD_DRV_LOG(ERR, "Wrong nb_desc value");
- return -EINVAL;
- }
+ /* Enable vlan strip if it is not configured yet */
+ if ((mask & ETH_VLAN_STRIP_OFFLOAD) &&
+ !(hw->ctrl & NFP_NET_CFG_CTRL_RXVLAN))
+ new_ctrl = hw->ctrl | NFP_NET_CFG_CTRL_RXVLAN;
- /*
- * Free memory prior to re-allocation if needed. This is the case after
- * calling nfp_net_stop
- */
- if (dev->data->rx_queues[queue_idx]) {
- nfp_net_rx_queue_release(dev->data->rx_queues[queue_idx]);
- dev->data->rx_queues[queue_idx] = NULL;
- }
+ /* Disable vlan strip just if it is configured */
+ if (!(mask & ETH_VLAN_STRIP_OFFLOAD) &&
+ (hw->ctrl & NFP_NET_CFG_CTRL_RXVLAN))
+ new_ctrl = hw->ctrl & ~NFP_NET_CFG_CTRL_RXVLAN;
- /* Allocating rx queue data structure */
- rxq = rte_zmalloc_socket("ethdev RX queue", sizeof(struct nfp_net_rxq),
- RTE_CACHE_LINE_SIZE, socket_id);
- if (rxq == NULL)
- return -ENOMEM;
+ if (new_ctrl == 0)
+ return 0;
- /* Hw queues mapping based on firmware configuration */
- rxq->qidx = queue_idx;
- rxq->fl_qcidx = queue_idx * hw->stride_rx;
- rxq->rx_qcidx = rxq->fl_qcidx + (hw->stride_rx - 1);
- rxq->qcp_fl = hw->rx_bar + NFP_QCP_QUEUE_OFF(rxq->fl_qcidx);
- rxq->qcp_rx = hw->rx_bar + NFP_QCP_QUEUE_OFF(rxq->rx_qcidx);
+ update = NFP_NET_CFG_UPDATE_GEN;
- /*
- * Tracking mbuf size for detecting a potential mbuf overflow due to
- * RX offset
- */
- rxq->mem_pool = mp;
- rxq->mbuf_size = rxq->mem_pool->elt_size;
- rxq->mbuf_size -= (sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM);
- hw->flbufsz = rxq->mbuf_size;
+ ret = nfp_net_reconfig(hw, new_ctrl, update);
+ if (!ret)
+ hw->ctrl = new_ctrl;
- rxq->rx_count = nb_desc;
- rxq->port_id = dev->data->port_id;
- rxq->rx_free_thresh = rx_conf->rx_free_thresh;
- rxq->drop_en = rx_conf->rx_drop_en;
+ return ret;
+}
- /*
- * Allocate RX ring hardware descriptors. A memzone large enough to
- * handle the maximum ring size is allocated in order to allow for
- * resizing in later calls to the queue setup function.
- */
- tz = rte_eth_dma_zone_reserve(dev, "rx_ring", queue_idx,
- sizeof(struct nfp_net_rx_desc) *
- NFP_NET_MAX_RX_DESC, NFP_MEMZONE_ALIGN,
- socket_id);
-
- if (tz == NULL) {
- PMD_DRV_LOG(ERR, "Error allocating rx dma");
- nfp_net_rx_queue_release(rxq);
- return -ENOMEM;
- }
-
- /* Saving physical and virtual addresses for the RX ring */
- rxq->dma = (uint64_t)tz->iova;
- rxq->rxds = (struct nfp_net_rx_desc *)tz->addr;
-
- /* mbuf pointers array for referencing mbufs linked to RX descriptors */
- rxq->rxbufs = rte_zmalloc_socket("rxq->rxbufs",
- sizeof(*rxq->rxbufs) * nb_desc,
- RTE_CACHE_LINE_SIZE, socket_id);
- if (rxq->rxbufs == NULL) {
- nfp_net_rx_queue_release(rxq);
- return -ENOMEM;
- }
-
- PMD_RX_LOG(DEBUG, "rxbufs=%p hw_ring=%p dma_addr=0x%" PRIx64,
- rxq->rxbufs, rxq->rxds, (unsigned long int)rxq->dma);
-
- nfp_net_reset_rx_queue(rxq);
-
- dev->data->rx_queues[queue_idx] = rxq;
- rxq->hw = hw;
-
- /*
- * Telling the HW about the physical address of the RX ring and number
- * of descriptors in log2 format
- */
- nn_cfg_writeq(hw, NFP_NET_CFG_RXR_ADDR(queue_idx), rxq->dma);
- nn_cfg_writeb(hw, NFP_NET_CFG_RXR_SZ(queue_idx), rte_log2_u32(nb_desc));
-
- return 0;
-}
-
-static int
-nfp_net_rx_fill_freelist(struct nfp_net_rxq *rxq)
-{
- struct nfp_net_rx_buff *rxe = rxq->rxbufs;
- uint64_t dma_addr;
- unsigned i;
-
- PMD_RX_LOG(DEBUG, "nfp_net_rx_fill_freelist for %u descriptors",
- rxq->rx_count);
-
- for (i = 0; i < rxq->rx_count; i++) {
- struct nfp_net_rx_desc *rxd;
- struct rte_mbuf *mbuf = rte_pktmbuf_alloc(rxq->mem_pool);
-
- if (mbuf == NULL) {
- PMD_DRV_LOG(ERR, "RX mbuf alloc failed queue_id=%u",
- (unsigned)rxq->qidx);
- return -ENOMEM;
- }
-
- dma_addr = rte_cpu_to_le_64(RTE_MBUF_DMA_ADDR_DEFAULT(mbuf));
-
- rxd = &rxq->rxds[i];
- rxd->fld.dd = 0;
- rxd->fld.dma_addr_hi = (dma_addr >> 32) & 0xff;
- rxd->fld.dma_addr_lo = dma_addr & 0xffffffff;
- rxe[i].mbuf = mbuf;
- PMD_RX_LOG(DEBUG, "[%d]: %" PRIx64, i, dma_addr);
- }
-
- /* Make sure all writes are flushed before telling the hardware */
- rte_wmb();
-
- /* Not advertising the whole ring as the firmware gets confused if so */
- PMD_RX_LOG(DEBUG, "Increment FL write pointer in %u",
- rxq->rx_count - 1);
-
- nfp_qcp_ptr_add(rxq->qcp_fl, NFP_QCP_WRITE_PTR, rxq->rx_count - 1);
-
- return 0;
-}
-
-static int
-nfp_net_tx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
- uint16_t nb_desc, unsigned int socket_id,
- const struct rte_eth_txconf *tx_conf)
-{
- const struct rte_memzone *tz;
- struct nfp_net_txq *txq;
- uint16_t tx_free_thresh;
- struct nfp_net_hw *hw;
- uint32_t tx_desc_sz;
-
- hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-
- PMD_INIT_FUNC_TRACE();
-
- /* Validating number of descriptors */
- tx_desc_sz = nb_desc * sizeof(struct nfp_net_tx_desc);
- if (tx_desc_sz % NFP_ALIGN_RING_DESC != 0 ||
- nb_desc > NFP_NET_MAX_TX_DESC ||
- nb_desc < NFP_NET_MIN_TX_DESC) {
- PMD_DRV_LOG(ERR, "Wrong nb_desc value");
- return -EINVAL;
- }
-
- tx_free_thresh = (uint16_t)((tx_conf->tx_free_thresh) ?
- tx_conf->tx_free_thresh :
- DEFAULT_TX_FREE_THRESH);
-
- if (tx_free_thresh > (nb_desc)) {
- PMD_DRV_LOG(ERR,
- "tx_free_thresh must be less than the number of TX "
- "descriptors. (tx_free_thresh=%u port=%d "
- "queue=%d)", (unsigned int)tx_free_thresh,
- dev->data->port_id, (int)queue_idx);
- return -(EINVAL);
- }
-
- /*
- * Free memory prior to re-allocation if needed. This is the case after
- * calling nfp_net_stop
- */
- if (dev->data->tx_queues[queue_idx]) {
- PMD_TX_LOG(DEBUG, "Freeing memory prior to re-allocation %d",
- queue_idx);
- nfp_net_tx_queue_release(dev->data->tx_queues[queue_idx]);
- dev->data->tx_queues[queue_idx] = NULL;
- }
-
- /* Allocating tx queue data structure */
- txq = rte_zmalloc_socket("ethdev TX queue", sizeof(struct nfp_net_txq),
- RTE_CACHE_LINE_SIZE, socket_id);
- if (txq == NULL) {
- PMD_DRV_LOG(ERR, "Error allocating tx dma");
- return -ENOMEM;
- }
-
- /*
- * Allocate TX ring hardware descriptors. A memzone large enough to
- * handle the maximum ring size is allocated in order to allow for
- * resizing in later calls to the queue setup function.
- */
- tz = rte_eth_dma_zone_reserve(dev, "tx_ring", queue_idx,
- sizeof(struct nfp_net_tx_desc) *
- NFP_NET_MAX_TX_DESC, NFP_MEMZONE_ALIGN,
- socket_id);
- if (tz == NULL) {
- PMD_DRV_LOG(ERR, "Error allocating tx dma");
- nfp_net_tx_queue_release(txq);
- return -ENOMEM;
- }
-
- txq->tx_count = nb_desc;
- txq->tx_free_thresh = tx_free_thresh;
- txq->tx_pthresh = tx_conf->tx_thresh.pthresh;
- txq->tx_hthresh = tx_conf->tx_thresh.hthresh;
- txq->tx_wthresh = tx_conf->tx_thresh.wthresh;
-
- /* queue mapping based on firmware configuration */
- txq->qidx = queue_idx;
- txq->tx_qcidx = queue_idx * hw->stride_tx;
- txq->qcp_q = hw->tx_bar + NFP_QCP_QUEUE_OFF(txq->tx_qcidx);
-
- txq->port_id = dev->data->port_id;
-
- /* Saving physical and virtual addresses for the TX ring */
- txq->dma = (uint64_t)tz->iova;
- txq->txds = (struct nfp_net_tx_desc *)tz->addr;
-
- /* mbuf pointers array for referencing mbufs linked to TX descriptors */
- txq->txbufs = rte_zmalloc_socket("txq->txbufs",
- sizeof(*txq->txbufs) * nb_desc,
- RTE_CACHE_LINE_SIZE, socket_id);
- if (txq->txbufs == NULL) {
- nfp_net_tx_queue_release(txq);
- return -ENOMEM;
- }
- PMD_TX_LOG(DEBUG, "txbufs=%p hw_ring=%p dma_addr=0x%" PRIx64,
- txq->txbufs, txq->txds, (unsigned long int)txq->dma);
-
- nfp_net_reset_tx_queue(txq);
-
- dev->data->tx_queues[queue_idx] = txq;
- txq->hw = hw;
-
- /*
- * Telling the HW about the physical address of the TX ring and number
- * of descriptors in log2 format
- */
- nn_cfg_writeq(hw, NFP_NET_CFG_TXR_ADDR(queue_idx), txq->dma);
- nn_cfg_writeb(hw, NFP_NET_CFG_TXR_SZ(queue_idx), rte_log2_u32(nb_desc));
-
- return 0;
-}
-
-/* nfp_net_tx_tso - Set TX descriptor for TSO */
-static inline void
-nfp_net_tx_tso(struct nfp_net_txq *txq, struct nfp_net_tx_desc *txd,
- struct rte_mbuf *mb)
-{
- uint64_t ol_flags;
- struct nfp_net_hw *hw = txq->hw;
-
- if (!(hw->cap & NFP_NET_CFG_CTRL_LSO_ANY))
- goto clean_txd;
-
- ol_flags = mb->ol_flags;
-
- if (!(ol_flags & PKT_TX_TCP_SEG))
- goto clean_txd;
-
- txd->l3_offset = mb->l2_len;
- txd->l4_offset = mb->l2_len + mb->l3_len;
- txd->lso_hdrlen = mb->l2_len + mb->l3_len + mb->l4_len;
- txd->mss = rte_cpu_to_le_16(mb->tso_segsz);
- txd->flags = PCIE_DESC_TX_LSO;
- return;
-
-clean_txd:
- txd->flags = 0;
- txd->l3_offset = 0;
- txd->l4_offset = 0;
- txd->lso_hdrlen = 0;
- txd->mss = 0;
-}
-
-/* nfp_net_tx_cksum - Set TX CSUM offload flags in TX descriptor */
-static inline void
-nfp_net_tx_cksum(struct nfp_net_txq *txq, struct nfp_net_tx_desc *txd,
- struct rte_mbuf *mb)
-{
- uint64_t ol_flags;
- struct nfp_net_hw *hw = txq->hw;
-
- if (!(hw->cap & NFP_NET_CFG_CTRL_TXCSUM))
- return;
-
- ol_flags = mb->ol_flags;
-
- /* IPv6 does not need checksum */
- if (ol_flags & PKT_TX_IP_CKSUM)
- txd->flags |= PCIE_DESC_TX_IP4_CSUM;
-
- switch (ol_flags & PKT_TX_L4_MASK) {
- case PKT_TX_UDP_CKSUM:
- txd->flags |= PCIE_DESC_TX_UDP_CSUM;
- break;
- case PKT_TX_TCP_CKSUM:
- txd->flags |= PCIE_DESC_TX_TCP_CSUM;
- break;
- }
-
- if (ol_flags & (PKT_TX_IP_CKSUM | PKT_TX_L4_MASK))
- txd->flags |= PCIE_DESC_TX_CSUM;
-}
-
-/* nfp_net_rx_cksum - set mbuf checksum flags based on RX descriptor flags */
-static inline void
-nfp_net_rx_cksum(struct nfp_net_rxq *rxq, struct nfp_net_rx_desc *rxd,
- struct rte_mbuf *mb)
-{
- struct nfp_net_hw *hw = rxq->hw;
-
- if (!(hw->ctrl & NFP_NET_CFG_CTRL_RXCSUM))
- return;
-
- /* If IPv4 and IP checksum error, fail */
- if (unlikely((rxd->rxd.flags & PCIE_DESC_RX_IP4_CSUM) &&
- !(rxd->rxd.flags & PCIE_DESC_RX_IP4_CSUM_OK)))
- mb->ol_flags |= PKT_RX_IP_CKSUM_BAD;
- else
- mb->ol_flags |= PKT_RX_IP_CKSUM_GOOD;
-
- /* If neither UDP nor TCP return */
- if (!(rxd->rxd.flags & PCIE_DESC_RX_TCP_CSUM) &&
- !(rxd->rxd.flags & PCIE_DESC_RX_UDP_CSUM))
- return;
-
- if (likely(rxd->rxd.flags & PCIE_DESC_RX_L4_CSUM_OK))
- mb->ol_flags |= PKT_RX_L4_CKSUM_GOOD;
- else
- mb->ol_flags |= PKT_RX_L4_CKSUM_BAD;
-}
-
-#define NFP_HASH_OFFSET ((uint8_t *)mbuf->buf_addr + mbuf->data_off - 4)
-#define NFP_HASH_TYPE_OFFSET ((uint8_t *)mbuf->buf_addr + mbuf->data_off - 8)
-
-#define NFP_DESC_META_LEN(d) (d->rxd.meta_len_dd & PCIE_DESC_RX_META_LEN_MASK)
-
-/*
- * nfp_net_set_hash - Set mbuf hash data
- *
- * The RSS hash and hash-type are pre-pended to the packet data.
- * Extract and decode it and set the mbuf fields.
- */
-static inline void
-nfp_net_set_hash(struct nfp_net_rxq *rxq, struct nfp_net_rx_desc *rxd,
- struct rte_mbuf *mbuf)
-{
- struct nfp_net_hw *hw = rxq->hw;
- uint8_t *meta_offset;
- uint32_t meta_info;
- uint32_t hash = 0;
- uint32_t hash_type = 0;
-
- if (!(hw->ctrl & NFP_NET_CFG_CTRL_RSS))
- return;
-
- /* this is true for new firmwares */
- if (likely(((hw->cap & NFP_NET_CFG_CTRL_RSS2) ||
- (NFD_CFG_MAJOR_VERSION_of(hw->ver) == 4)) &&
- NFP_DESC_META_LEN(rxd))) {
- /*
- * new metadata api:
- * <---- 32 bit ----->
- * m field type word
- * e data field #2
- * t data field #1
- * a data field #0
- * ====================
- * packet data
- *
- * Field type word contains up to 8 4bit field types
- * A 4bit field type refers to a data field word
- * A data field word can have several 4bit field types
- */
- meta_offset = rte_pktmbuf_mtod(mbuf, uint8_t *);
- meta_offset -= NFP_DESC_META_LEN(rxd);
- meta_info = rte_be_to_cpu_32(*(uint32_t *)meta_offset);
- meta_offset += 4;
- /* NFP PMD just supports metadata for hashing */
- switch (meta_info & NFP_NET_META_FIELD_MASK) {
- case NFP_NET_META_HASH:
- /* next field type is about the hash type */
- meta_info >>= NFP_NET_META_FIELD_SIZE;
- /* hash value is in the data field */
- hash = rte_be_to_cpu_32(*(uint32_t *)meta_offset);
- hash_type = meta_info & NFP_NET_META_FIELD_MASK;
- break;
- default:
- /* Unsupported metadata can be a performance issue */
- return;
- }
- } else {
- if (!(rxd->rxd.flags & PCIE_DESC_RX_RSS))
- return;
-
- hash = rte_be_to_cpu_32(*(uint32_t *)NFP_HASH_OFFSET);
- hash_type = rte_be_to_cpu_32(*(uint32_t *)NFP_HASH_TYPE_OFFSET);
- }
-
- mbuf->hash.rss = hash;
- mbuf->ol_flags |= PKT_RX_RSS_HASH;
-
- switch (hash_type) {
- case NFP_NET_RSS_IPV4:
- mbuf->packet_type |= RTE_PTYPE_INNER_L3_IPV4;
- break;
- case NFP_NET_RSS_IPV6:
- mbuf->packet_type |= RTE_PTYPE_INNER_L3_IPV6;
- break;
- case NFP_NET_RSS_IPV6_EX:
- mbuf->packet_type |= RTE_PTYPE_INNER_L3_IPV6_EXT;
- break;
- case NFP_NET_RSS_IPV4_TCP:
- mbuf->packet_type |= RTE_PTYPE_INNER_L3_IPV6_EXT;
- break;
- case NFP_NET_RSS_IPV6_TCP:
- mbuf->packet_type |= RTE_PTYPE_INNER_L3_IPV6_EXT;
- break;
- case NFP_NET_RSS_IPV4_UDP:
- mbuf->packet_type |= RTE_PTYPE_INNER_L3_IPV6_EXT;
- break;
- case NFP_NET_RSS_IPV6_UDP:
- mbuf->packet_type |= RTE_PTYPE_INNER_L3_IPV6_EXT;
- break;
- default:
- mbuf->packet_type |= RTE_PTYPE_INNER_L4_MASK;
- }
-}
-
-static inline void
-nfp_net_mbuf_alloc_failed(struct nfp_net_rxq *rxq)
-{
- rte_eth_devices[rxq->port_id].data->rx_mbuf_alloc_failed++;
-}
-
-#define NFP_DESC_META_LEN(d) (d->rxd.meta_len_dd & PCIE_DESC_RX_META_LEN_MASK)
-
-/*
- * RX path design:
- *
- * There are some decisions to take:
- * 1) How to check DD RX descriptors bit
- * 2) How and when to allocate new mbufs
- *
- * Current implementation checks just one single DD bit each loop. As each
- * descriptor is 8 bytes, it is likely a good idea to check descriptors in
- * a single cache line instead. Tests with this change have not shown any
- * performance improvement but it requires further investigation. For example,
- * depending on which descriptor is next, the number of descriptors could be
- * less than 8 for just checking those in the same cache line. This implies
- * extra work which could be counterproductive by itself. Indeed, last firmware
- * changes are just doing this: writing several descriptors with the DD bit
- * for saving PCIe bandwidth and DMA operations from the NFP.
- *
- * Mbuf allocation is done when a new packet is received. Then the descriptor
- * is automatically linked with the new mbuf and the old one is given to the
- * user. The main drawback with this design is mbuf allocation is heavier than
- * using bulk allocations allowed by DPDK with rte_mempool_get_bulk. From the
- * cache point of view it does not seem allocating the mbuf early on as we are
- * doing now have any benefit at all. Again, tests with this change have not
- * shown any improvement. Also, rte_mempool_get_bulk returns all or nothing
- * so looking at the implications of this type of allocation should be studied
- * deeply
- */
-
-static uint16_t
-nfp_net_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
-{
- struct nfp_net_rxq *rxq;
- struct nfp_net_rx_desc *rxds;
- struct nfp_net_rx_buff *rxb;
- struct nfp_net_hw *hw;
- struct rte_mbuf *mb;
- struct rte_mbuf *new_mb;
- uint16_t nb_hold;
- uint64_t dma_addr;
- int avail;
-
- rxq = rx_queue;
- if (unlikely(rxq == NULL)) {
- /*
- * DPDK just checks the queue is lower than max queues
- * enabled. But the queue needs to be configured
- */
- RTE_LOG_DP(ERR, PMD, "RX Bad queue\n");
- return -EINVAL;
- }
-
- hw = rxq->hw;
- avail = 0;
- nb_hold = 0;
-
- while (avail < nb_pkts) {
- rxb = &rxq->rxbufs[rxq->rd_p];
- if (unlikely(rxb == NULL)) {
- RTE_LOG_DP(ERR, PMD, "rxb does not exist!\n");
- break;
- }
-
- rxds = &rxq->rxds[rxq->rd_p];
- if ((rxds->rxd.meta_len_dd & PCIE_DESC_RX_DD) == 0)
- break;
-
- /*
- * Memory barrier to ensure that we won't do other
- * reads before the DD bit.
- */
- rte_rmb();
-
- /*
- * We got a packet. Let's alloc a new mbuf for refilling the
- * free descriptor ring as soon as possible
- */
- new_mb = rte_pktmbuf_alloc(rxq->mem_pool);
- if (unlikely(new_mb == NULL)) {
- RTE_LOG_DP(DEBUG, PMD,
- "RX mbuf alloc failed port_id=%u queue_id=%u\n",
- rxq->port_id, (unsigned int)rxq->qidx);
- nfp_net_mbuf_alloc_failed(rxq);
- break;
- }
-
- nb_hold++;
-
- /*
- * Grab the mbuf and refill the descriptor with the
- * previously allocated mbuf
- */
- mb = rxb->mbuf;
- rxb->mbuf = new_mb;
-
- PMD_RX_LOG(DEBUG, "Packet len: %u, mbuf_size: %u",
- rxds->rxd.data_len, rxq->mbuf_size);
-
- /* Size of this segment */
- mb->data_len = rxds->rxd.data_len - NFP_DESC_META_LEN(rxds);
- /* Size of the whole packet. We just support 1 segment */
- mb->pkt_len = rxds->rxd.data_len - NFP_DESC_META_LEN(rxds);
-
- if (unlikely((mb->data_len + hw->rx_offset) >
- rxq->mbuf_size)) {
- /*
- * This should not happen and the user has the
- * responsibility of avoiding it. But we have
- * to give some info about the error
- */
- RTE_LOG_DP(ERR, PMD,
- "mbuf overflow likely due to the RX offset.\n"
- "\t\tYour mbuf size should have extra space for"
- " RX offset=%u bytes.\n"
- "\t\tCurrently you just have %u bytes available"
- " but the received packet is %u bytes long",
- hw->rx_offset,
- rxq->mbuf_size - hw->rx_offset,
- mb->data_len);
- return -EINVAL;
- }
-
- /* Filling the received mbuf with packet info */
- if (hw->rx_offset)
- mb->data_off = RTE_PKTMBUF_HEADROOM + hw->rx_offset;
- else
- mb->data_off = RTE_PKTMBUF_HEADROOM +
- NFP_DESC_META_LEN(rxds);
-
- /* No scatter mode supported */
- mb->nb_segs = 1;
- mb->next = NULL;
-
- mb->port = rxq->port_id;
-
- /* Checking the RSS flag */
- nfp_net_set_hash(rxq, rxds, mb);
-
- /* Checking the checksum flag */
- nfp_net_rx_cksum(rxq, rxds, mb);
-
- if ((rxds->rxd.flags & PCIE_DESC_RX_VLAN) &&
- (hw->ctrl & NFP_NET_CFG_CTRL_RXVLAN)) {
- mb->vlan_tci = rte_cpu_to_le_32(rxds->rxd.vlan);
- mb->ol_flags |= PKT_RX_VLAN | PKT_RX_VLAN_STRIPPED;
- }
-
- /* Adding the mbuf to the mbuf array passed by the app */
- rx_pkts[avail++] = mb;
-
- /* Now resetting and updating the descriptor */
- rxds->vals[0] = 0;
- rxds->vals[1] = 0;
- dma_addr = rte_cpu_to_le_64(RTE_MBUF_DMA_ADDR_DEFAULT(new_mb));
- rxds->fld.dd = 0;
- rxds->fld.dma_addr_hi = (dma_addr >> 32) & 0xff;
- rxds->fld.dma_addr_lo = dma_addr & 0xffffffff;
-
- rxq->rd_p++;
- if (unlikely(rxq->rd_p == rxq->rx_count)) /* wrapping?*/
- rxq->rd_p = 0;
- }
-
- if (nb_hold == 0)
- return nb_hold;
-
- PMD_RX_LOG(DEBUG, "RX port_id=%u queue_id=%u, %d packets received",
- rxq->port_id, (unsigned int)rxq->qidx, nb_hold);
-
- nb_hold += rxq->nb_rx_hold;
-
- /*
- * FL descriptors needs to be written before incrementing the
- * FL queue WR pointer
- */
- rte_wmb();
- if (nb_hold > rxq->rx_free_thresh) {
- PMD_RX_LOG(DEBUG, "port=%u queue=%u nb_hold=%u avail=%u",
- rxq->port_id, (unsigned int)rxq->qidx,
- (unsigned)nb_hold, (unsigned)avail);
- nfp_qcp_ptr_add(rxq->qcp_fl, NFP_QCP_WRITE_PTR, nb_hold);
- nb_hold = 0;
- }
- rxq->nb_rx_hold = nb_hold;
-
- return avail;
-}
-
-/*
- * nfp_net_tx_free_bufs - Check for descriptors with a complete
- * status
- * @txq: TX queue to work with
- * Returns number of descriptors freed
- */
-int
-nfp_net_tx_free_bufs(struct nfp_net_txq *txq)
-{
- uint32_t qcp_rd_p;
- int todo;
-
- PMD_TX_LOG(DEBUG, "queue %u. Check for descriptor with a complete"
- " status", txq->qidx);
-
- /* Work out how many packets have been sent */
- qcp_rd_p = nfp_qcp_read(txq->qcp_q, NFP_QCP_READ_PTR);
-
- if (qcp_rd_p == txq->rd_p) {
- PMD_TX_LOG(DEBUG, "queue %u: It seems harrier is not sending "
- "packets (%u, %u)", txq->qidx,
- qcp_rd_p, txq->rd_p);
- return 0;
- }
-
- if (qcp_rd_p > txq->rd_p)
- todo = qcp_rd_p - txq->rd_p;
- else
- todo = qcp_rd_p + txq->tx_count - txq->rd_p;
-
- PMD_TX_LOG(DEBUG, "qcp_rd_p %u, txq->rd_p: %u, qcp->rd_p: %u",
- qcp_rd_p, txq->rd_p, txq->rd_p);
-
- if (todo == 0)
- return todo;
-
- txq->rd_p += todo;
- if (unlikely(txq->rd_p >= txq->tx_count))
- txq->rd_p -= txq->tx_count;
-
- return todo;
-}
-
-/* Leaving always free descriptors for avoiding wrapping confusion */
-static inline
-uint32_t nfp_free_tx_desc(struct nfp_net_txq *txq)
-{
- if (txq->wr_p >= txq->rd_p)
- return txq->tx_count - (txq->wr_p - txq->rd_p) - 8;
- else
- return txq->rd_p - txq->wr_p - 8;
-}
-
-/*
- * nfp_net_txq_full - Check if the TX queue free descriptors
- * is below tx_free_threshold
- *
- * @txq: TX queue to check
- *
- * This function uses the host copy* of read/write pointers
- */
-static inline
-uint32_t nfp_net_txq_full(struct nfp_net_txq *txq)
-{
- return (nfp_free_tx_desc(txq) < txq->tx_free_thresh);
-}
-
-static uint16_t
-nfp_net_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
-{
- struct nfp_net_txq *txq;
- struct nfp_net_hw *hw;
- struct nfp_net_tx_desc *txds, txd;
- struct rte_mbuf *pkt;
- uint64_t dma_addr;
- int pkt_size, dma_size;
- uint16_t free_descs, issued_descs;
- struct rte_mbuf **lmbuf;
- int i;
-
- txq = tx_queue;
- hw = txq->hw;
- txds = &txq->txds[txq->wr_p];
-
- PMD_TX_LOG(DEBUG, "working for queue %u at pos %d and %u packets",
- txq->qidx, txq->wr_p, nb_pkts);
-
- if ((nfp_free_tx_desc(txq) < nb_pkts) || (nfp_net_txq_full(txq)))
- nfp_net_tx_free_bufs(txq);
-
- free_descs = (uint16_t)nfp_free_tx_desc(txq);
- if (unlikely(free_descs == 0))
- return 0;
-
- pkt = *tx_pkts;
-
- i = 0;
- issued_descs = 0;
- PMD_TX_LOG(DEBUG, "queue: %u. Sending %u packets",
- txq->qidx, nb_pkts);
- /* Sending packets */
- while ((i < nb_pkts) && free_descs) {
- /* Grabbing the mbuf linked to the current descriptor */
- lmbuf = &txq->txbufs[txq->wr_p].mbuf;
- /* Warming the cache for releasing the mbuf later on */
- RTE_MBUF_PREFETCH_TO_FREE(*lmbuf);
-
- pkt = *(tx_pkts + i);
-
- if (unlikely((pkt->nb_segs > 1) &&
- !(hw->cap & NFP_NET_CFG_CTRL_GATHER))) {
- PMD_INIT_LOG(INFO, "NFP_NET_CFG_CTRL_GATHER not set");
- rte_panic("Multisegment packet unsupported\n");
- }
-
- /* Checking if we have enough descriptors */
- if (unlikely(pkt->nb_segs > free_descs))
- goto xmit_end;
-
- /*
- * Checksum and VLAN flags just in the first descriptor for a
- * multisegment packet, but TSO info needs to be in all of them.
- */
- txd.data_len = pkt->pkt_len;
- nfp_net_tx_tso(txq, &txd, pkt);
- nfp_net_tx_cksum(txq, &txd, pkt);
-
- if ((pkt->ol_flags & PKT_TX_VLAN_PKT) &&
- (hw->cap & NFP_NET_CFG_CTRL_TXVLAN)) {
- txd.flags |= PCIE_DESC_TX_VLAN;
- txd.vlan = pkt->vlan_tci;
- }
-
- /*
- * mbuf data_len is the data in one segment and pkt_len data
- * in the whole packet. When the packet is just one segment,
- * then data_len = pkt_len
- */
- pkt_size = pkt->pkt_len;
-
- while (pkt) {
- /* Copying TSO, VLAN and cksum info */
- *txds = txd;
-
- /* Releasing mbuf used by this descriptor previously*/
- if (*lmbuf)
- rte_pktmbuf_free_seg(*lmbuf);
-
- /*
- * Linking mbuf with descriptor for being released
- * next time descriptor is used
- */
- *lmbuf = pkt;
-
- dma_size = pkt->data_len;
- dma_addr = rte_mbuf_data_iova(pkt);
- PMD_TX_LOG(DEBUG, "Working with mbuf at dma address:"
- "%" PRIx64 "", dma_addr);
-
- /* Filling descriptors fields */
- txds->dma_len = dma_size;
- txds->data_len = txd.data_len;
- txds->dma_addr_hi = (dma_addr >> 32) & 0xff;
- txds->dma_addr_lo = (dma_addr & 0xffffffff);
- ASSERT(free_descs > 0);
- free_descs--;
-
- txq->wr_p++;
- if (unlikely(txq->wr_p == txq->tx_count)) /* wrapping?*/
- txq->wr_p = 0;
-
- pkt_size -= dma_size;
-
- /*
- * Making the EOP, packets with just one segment
- * the priority
- */
- if (likely(!pkt_size))
- txds->offset_eop = PCIE_DESC_TX_EOP;
- else
- txds->offset_eop = 0;
-
- pkt = pkt->next;
- /* Referencing next free TX descriptor */
- txds = &txq->txds[txq->wr_p];
- lmbuf = &txq->txbufs[txq->wr_p].mbuf;
- issued_descs++;
- }
- i++;
- }
-
-xmit_end:
- /* Increment write pointers. Force memory write before we let HW know */
- rte_wmb();
- nfp_qcp_ptr_add(txq->qcp_q, NFP_QCP_WRITE_PTR, issued_descs);
-
- return i;
-}
-
-static int
-nfp_net_vlan_offload_set(struct rte_eth_dev *dev, int mask)
-{
- uint32_t new_ctrl, update;
- struct nfp_net_hw *hw;
- int ret;
-
- hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- new_ctrl = 0;
-
- /* Enable vlan strip if it is not configured yet */
- if ((mask & ETH_VLAN_STRIP_OFFLOAD) &&
- !(hw->ctrl & NFP_NET_CFG_CTRL_RXVLAN))
- new_ctrl = hw->ctrl | NFP_NET_CFG_CTRL_RXVLAN;
-
- /* Disable vlan strip just if it is configured */
- if (!(mask & ETH_VLAN_STRIP_OFFLOAD) &&
- (hw->ctrl & NFP_NET_CFG_CTRL_RXVLAN))
- new_ctrl = hw->ctrl & ~NFP_NET_CFG_CTRL_RXVLAN;
-
- if (new_ctrl == 0)
- return 0;
-
- update = NFP_NET_CFG_UPDATE_GEN;
-
- ret = nfp_net_reconfig(hw, new_ctrl, update);
- if (!ret)
- hw->ctrl = new_ctrl;
-
- return ret;
-}
-
-static int
-nfp_net_rss_reta_write(struct rte_eth_dev *dev,
- struct rte_eth_rss_reta_entry64 *reta_conf,
- uint16_t reta_size)
-{
- uint32_t reta, mask;
- int i, j;
- int idx, shift;
- struct nfp_net_hw *hw =
- NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+static int
+nfp_net_rss_reta_write(struct rte_eth_dev *dev,
+ struct rte_eth_rss_reta_entry64 *reta_conf,
+ uint16_t reta_size)
+{
+ uint32_t reta, mask;
+ int i, j;
+ int idx, shift;
+ struct nfp_net_hw *hw =
+ NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
if (reta_size != NFP_NET_CFG_RSS_ITBL_SZ) {
PMD_DRV_LOG(ERR, "The size of hash lookup table configured "
}
/* Update Redirection Table(RETA) of Receive Side Scaling of Ethernet device */
-static int
+int
nfp_net_reta_update(struct rte_eth_dev *dev,
struct rte_eth_rss_reta_entry64 *reta_conf,
uint16_t reta_size)
}
/* Query Redirection Table(RETA) of Receive Side Scaling of Ethernet device. */
-static int
+int
nfp_net_reta_query(struct rte_eth_dev *dev,
struct rte_eth_rss_reta_entry64 *reta_conf,
uint16_t reta_size)
return 0;
}
-static int
+int
nfp_net_rss_hash_update(struct rte_eth_dev *dev,
struct rte_eth_rss_conf *rss_conf)
{
return 0;
}
-static int
+int
nfp_net_rss_hash_conf_get(struct rte_eth_dev *dev,
struct rte_eth_rss_conf *rss_conf)
{
return 0;
}
-static int
+int
nfp_net_rss_config_default(struct rte_eth_dev *dev)
{
struct rte_eth_conf *dev_conf;
.rx_queue_intr_disable = nfp_rx_queue_intr_disable,
};
-/*
- * All eth_dev created got its private data, but before nfp_net_init, that
- * private data is referencing private data for all the PF ports. This is due
- * to how the vNIC bars are mapped based on first port, so all ports need info
- * about port 0 private data. Inside nfp_net_init the private data pointer is
- * changed to the right address for each port once the bars have been mapped.
- *
- * This functions helps to find out which port and therefore which offset
- * inside the private data array to use.
- */
-static int
-get_pf_port_number(char *name)
-{
- char *pf_str = name;
- int size = 0;
-
- while ((*pf_str != '_') && (*pf_str != '\0') && (size++ < 30))
- pf_str++;
-
- if (size == 30)
- /*
- * This should not happen at all and it would mean major
- * implementation fault.
- */
- rte_panic("nfp_net: problem with pf device name\n");
-
- /* Expecting _portX with X within [0,7] */
- pf_str += 5;
-
- return (int)strtol(pf_str, NULL, 10);
-}
static int
nfp_net_init(struct rte_eth_dev *eth_dev)
{
struct rte_pci_device *pci_dev;
- struct nfp_net_hw *hw, *hwport0;
+ struct nfp_pf_dev *pf_dev;
+ struct nfp_net_hw *hw;
uint64_t tx_bar_off = 0, rx_bar_off = 0;
uint32_t start_q;
pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
+ /* Use backpointer here to the PF of this eth_dev */
+ pf_dev = NFP_NET_DEV_PRIVATE_TO_PF(eth_dev->data->dev_private);
+
/* NFP can not handle DMA addresses requiring more than 40 bits */
if (rte_mem_check_dma_mask(40)) {
RTE_LOG(ERR, PMD, "device %s can not be used:",
if ((pci_dev->id.device_id == PCI_DEVICE_ID_NFP4000_PF_NIC) ||
(pci_dev->id.device_id == PCI_DEVICE_ID_NFP6000_PF_NIC)) {
- port = get_pf_port_number(eth_dev->data->name);
+ port = ((struct nfp_net_hw *)eth_dev->data->dev_private)->idx;
if (port < 0 || port > 7) {
PMD_DRV_LOG(ERR, "Port value is wrong");
return -ENODEV;
}
- PMD_INIT_LOG(DEBUG, "Working with PF port value %d", port);
+ /* Use PF array of physical ports to get pointer to
+ * this specific port
+ */
+ hw = pf_dev->ports[port];
- /* This points to port 0 private data */
- hwport0 = NFP_NET_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
+ PMD_INIT_LOG(DEBUG, "Working with physical port number: %d, "
+ "NFP internal port number: %d",
+ port, hw->nfp_idx);
- /* This points to the specific port private data */
- hw = &hwport0[port];
} else {
hw = NFP_NET_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
- hwport0 = 0;
}
eth_dev->dev_ops = &nfp_net_eth_dev_ops;
return -ENODEV;
}
- if (hw->is_pf && port == 0) {
- hw->ctrl_bar = nfp_rtsym_map(hw->sym_tbl, "_pf0_net_bar0",
- hw->total_ports * 32768,
- &hw->ctrl_area);
- if (!hw->ctrl_bar) {
- printf("nfp_rtsym_map fails for _pf0_net_ctrl_bar");
- return -EIO;
+ if (hw->is_phyport) {
+ if (port == 0) {
+ hw->ctrl_bar = pf_dev->ctrl_bar;
+ } else {
+ if (!pf_dev->ctrl_bar)
+ return -ENODEV;
+ /* Use port offset in pf ctrl_bar for this
+ * ports control bar
+ */
+ hw->ctrl_bar = pf_dev->ctrl_bar +
+ (port * NFP_PF_CSR_SLICE_SIZE);
}
-
- PMD_INIT_LOG(DEBUG, "ctrl bar: %p", hw->ctrl_bar);
- }
-
- if (port > 0) {
- if (!hwport0->ctrl_bar)
- return -ENODEV;
-
- /* address based on port0 offset */
- hw->ctrl_bar = hwport0->ctrl_bar +
- (port * NFP_PF_CSR_SLICE_SIZE);
}
PMD_INIT_LOG(DEBUG, "ctrl bar: %p", hw->ctrl_bar);
PMD_INIT_LOG(DEBUG, "tx_bar_off: 0x%" PRIx64 "", tx_bar_off);
PMD_INIT_LOG(DEBUG, "rx_bar_off: 0x%" PRIx64 "", rx_bar_off);
- if (hw->is_pf && port == 0) {
- /* configure access to tx/rx vNIC BARs */
- hwport0->hw_queues = nfp_cpp_map_area(hw->cpp, 0, 0,
- NFP_PCIE_QUEUE(0),
- NFP_QCP_QUEUE_AREA_SZ,
- &hw->hwqueues_area);
-
- if (!hwport0->hw_queues) {
- printf("nfp_rtsym_map fails for net.qc");
- err = -EIO;
- goto dev_err_ctrl_map;
- }
-
- PMD_INIT_LOG(DEBUG, "tx/rx bar address: 0x%p",
- hwport0->hw_queues);
- }
-
- if (hw->is_pf) {
- hw->tx_bar = hwport0->hw_queues + tx_bar_off;
- hw->rx_bar = hwport0->hw_queues + rx_bar_off;
+ if (hw->is_phyport) {
+ hw->tx_bar = pf_dev->hw_queues + tx_bar_off;
+ hw->rx_bar = pf_dev->hw_queues + rx_bar_off;
eth_dev->data->dev_private = hw;
} else {
hw->tx_bar = (uint8_t *)pci_dev->mem_resource[2].addr +
hw->cap & NFP_NET_CFG_CTRL_RXCSUM ? "RXCSUM " : "",
hw->cap & NFP_NET_CFG_CTRL_TXCSUM ? "TXCSUM " : "",
hw->cap & NFP_NET_CFG_CTRL_RXVLAN ? "RXVLAN " : "",
- hw->cap & NFP_NET_CFG_CTRL_TXVLAN ? "TXVLAN " : "",
- hw->cap & NFP_NET_CFG_CTRL_SCATTER ? "SCATTER " : "",
- hw->cap & NFP_NET_CFG_CTRL_GATHER ? "GATHER " : "",
- hw->cap & NFP_NET_CFG_CTRL_LIVE_ADDR ? "LIVE_ADDR " : "",
- hw->cap & NFP_NET_CFG_CTRL_LSO ? "TSO " : "",
- hw->cap & NFP_NET_CFG_CTRL_LSO2 ? "TSOv2 " : "",
- hw->cap & NFP_NET_CFG_CTRL_RSS ? "RSS " : "",
- hw->cap & NFP_NET_CFG_CTRL_RSS2 ? "RSSv2 " : "");
-
- hw->ctrl = 0;
-
- hw->stride_rx = stride;
- hw->stride_tx = stride;
-
- PMD_INIT_LOG(INFO, "max_rx_queues: %u, max_tx_queues: %u",
- hw->max_rx_queues, hw->max_tx_queues);
-
- /* Initializing spinlock for reconfigs */
- rte_spinlock_init(&hw->reconfig_lock);
-
- /* Allocating memory for mac addr */
- eth_dev->data->mac_addrs = rte_zmalloc("mac_addr",
- RTE_ETHER_ADDR_LEN, 0);
- if (eth_dev->data->mac_addrs == NULL) {
- PMD_INIT_LOG(ERR, "Failed to space for MAC address");
- err = -ENOMEM;
- goto dev_err_queues_map;
- }
-
- if (hw->is_pf) {
- nfp_net_pf_read_mac(hwport0, port);
- nfp_net_write_mac(hw, (uint8_t *)&hw->mac_addr);
- } else {
- nfp_net_vf_read_mac(hw);
- }
-
- if (!rte_is_valid_assigned_ether_addr(
- (struct rte_ether_addr *)&hw->mac_addr)) {
- PMD_INIT_LOG(INFO, "Using random mac address for port %d",
- port);
- /* Using random mac addresses for VFs */
- rte_eth_random_addr(&hw->mac_addr[0]);
- nfp_net_write_mac(hw, (uint8_t *)&hw->mac_addr);
- }
-
- /* Copying mac address to DPDK eth_dev struct */
- rte_ether_addr_copy((struct rte_ether_addr *)hw->mac_addr,
- ð_dev->data->mac_addrs[0]);
-
- if (!(hw->cap & NFP_NET_CFG_CTRL_LIVE_ADDR))
- eth_dev->data->dev_flags |= RTE_ETH_DEV_NOLIVE_MAC_ADDR;
-
- eth_dev->data->dev_flags |= RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS;
-
- PMD_INIT_LOG(INFO, "port %d VendorID=0x%x DeviceID=0x%x "
- "mac=%02x:%02x:%02x:%02x:%02x:%02x",
- eth_dev->data->port_id, pci_dev->id.vendor_id,
- pci_dev->id.device_id,
- hw->mac_addr[0], hw->mac_addr[1], hw->mac_addr[2],
- hw->mac_addr[3], hw->mac_addr[4], hw->mac_addr[5]);
-
- if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
- /* Registering LSC interrupt handler */
- rte_intr_callback_register(&pci_dev->intr_handle,
- nfp_net_dev_interrupt_handler,
- (void *)eth_dev);
- /* Telling the firmware about the LSC interrupt entry */
- nn_cfg_writeb(hw, NFP_NET_CFG_LSC, NFP_NET_IRQ_LSC_IDX);
- /* Recording current stats counters values */
- nfp_net_stats_reset(eth_dev);
- }
-
- return 0;
-
-dev_err_queues_map:
- nfp_cpp_area_free(hw->hwqueues_area);
-dev_err_ctrl_map:
- nfp_cpp_area_free(hw->ctrl_area);
-
- return err;
-}
-
-#define NFP_CPP_MEMIO_BOUNDARY (1 << 20)
-
-/*
- * Serving a write request to NFP from host programs. The request
- * sends the write size and the CPP target. The bridge makes use
- * of CPP interface handler configured by the PMD setup.
- */
-static int
-nfp_cpp_bridge_serve_write(int sockfd, struct nfp_cpp *cpp)
-{
- struct nfp_cpp_area *area;
- off_t offset, nfp_offset;
- uint32_t cpp_id, pos, len;
- uint32_t tmpbuf[16];
- size_t count, curlen, totlen = 0;
- int err = 0;
-
- PMD_CPP_LOG(DEBUG, "%s: offset size %zu, count_size: %zu\n", __func__,
- sizeof(off_t), sizeof(size_t));
-
- /* Reading the count param */
- err = recv(sockfd, &count, sizeof(off_t), 0);
- if (err != sizeof(off_t))
- return -EINVAL;
-
- curlen = count;
-
- /* Reading the offset param */
- err = recv(sockfd, &offset, sizeof(off_t), 0);
- if (err != sizeof(off_t))
- return -EINVAL;
-
- /* Obtain target's CPP ID and offset in target */
- cpp_id = (offset >> 40) << 8;
- nfp_offset = offset & ((1ull << 40) - 1);
-
- PMD_CPP_LOG(DEBUG, "%s: count %zu and offset %jd\n", __func__, count,
- offset);
- PMD_CPP_LOG(DEBUG, "%s: cpp_id %08x and nfp_offset %jd\n", __func__,
- cpp_id, nfp_offset);
-
- /* Adjust length if not aligned */
- if (((nfp_offset + (off_t)count - 1) & ~(NFP_CPP_MEMIO_BOUNDARY - 1)) !=
- (nfp_offset & ~(NFP_CPP_MEMIO_BOUNDARY - 1))) {
- curlen = NFP_CPP_MEMIO_BOUNDARY -
- (nfp_offset & (NFP_CPP_MEMIO_BOUNDARY - 1));
- }
-
- while (count > 0) {
- /* configure a CPP PCIe2CPP BAR for mapping the CPP target */
- area = nfp_cpp_area_alloc_with_name(cpp, cpp_id, "nfp.cdev",
- nfp_offset, curlen);
- if (!area) {
- RTE_LOG(ERR, PMD, "%s: area alloc fail\n", __func__);
- return -EIO;
- }
-
- /* mapping the target */
- err = nfp_cpp_area_acquire(area);
- if (err < 0) {
- RTE_LOG(ERR, PMD, "area acquire failed\n");
- nfp_cpp_area_free(area);
- return -EIO;
- }
-
- for (pos = 0; pos < curlen; pos += len) {
- len = curlen - pos;
- if (len > sizeof(tmpbuf))
- len = sizeof(tmpbuf);
-
- PMD_CPP_LOG(DEBUG, "%s: Receive %u of %zu\n", __func__,
- len, count);
- err = recv(sockfd, tmpbuf, len, MSG_WAITALL);
- if (err != (int)len) {
- RTE_LOG(ERR, PMD,
- "%s: error when receiving, %d of %zu\n",
- __func__, err, count);
- nfp_cpp_area_release(area);
- nfp_cpp_area_free(area);
- return -EIO;
- }
- err = nfp_cpp_area_write(area, pos, tmpbuf, len);
- if (err < 0) {
- RTE_LOG(ERR, PMD, "nfp_cpp_area_write error\n");
- nfp_cpp_area_release(area);
- nfp_cpp_area_free(area);
- return -EIO;
- }
- }
-
- nfp_offset += pos;
- totlen += pos;
- nfp_cpp_area_release(area);
- nfp_cpp_area_free(area);
-
- count -= pos;
- curlen = (count > NFP_CPP_MEMIO_BOUNDARY) ?
- NFP_CPP_MEMIO_BOUNDARY : count;
- }
-
- return 0;
-}
-
-/*
- * Serving a read request to NFP from host programs. The request
- * sends the read size and the CPP target. The bridge makes use
- * of CPP interface handler configured by the PMD setup. The read
- * data is sent to the requester using the same socket.
- */
-static int
-nfp_cpp_bridge_serve_read(int sockfd, struct nfp_cpp *cpp)
-{
- struct nfp_cpp_area *area;
- off_t offset, nfp_offset;
- uint32_t cpp_id, pos, len;
- uint32_t tmpbuf[16];
- size_t count, curlen, totlen = 0;
- int err = 0;
-
- PMD_CPP_LOG(DEBUG, "%s: offset size %zu, count_size: %zu\n", __func__,
- sizeof(off_t), sizeof(size_t));
-
- /* Reading the count param */
- err = recv(sockfd, &count, sizeof(off_t), 0);
- if (err != sizeof(off_t))
- return -EINVAL;
-
- curlen = count;
-
- /* Reading the offset param */
- err = recv(sockfd, &offset, sizeof(off_t), 0);
- if (err != sizeof(off_t))
- return -EINVAL;
-
- /* Obtain target's CPP ID and offset in target */
- cpp_id = (offset >> 40) << 8;
- nfp_offset = offset & ((1ull << 40) - 1);
-
- PMD_CPP_LOG(DEBUG, "%s: count %zu and offset %jd\n", __func__, count,
- offset);
- PMD_CPP_LOG(DEBUG, "%s: cpp_id %08x and nfp_offset %jd\n", __func__,
- cpp_id, nfp_offset);
-
- /* Adjust length if not aligned */
- if (((nfp_offset + (off_t)count - 1) & ~(NFP_CPP_MEMIO_BOUNDARY - 1)) !=
- (nfp_offset & ~(NFP_CPP_MEMIO_BOUNDARY - 1))) {
- curlen = NFP_CPP_MEMIO_BOUNDARY -
- (nfp_offset & (NFP_CPP_MEMIO_BOUNDARY - 1));
- }
-
- while (count > 0) {
- area = nfp_cpp_area_alloc_with_name(cpp, cpp_id, "nfp.cdev",
- nfp_offset, curlen);
- if (!area) {
- RTE_LOG(ERR, PMD, "%s: area alloc failed\n", __func__);
- return -EIO;
- }
-
- err = nfp_cpp_area_acquire(area);
- if (err < 0) {
- RTE_LOG(ERR, PMD, "area acquire failed\n");
- nfp_cpp_area_free(area);
- return -EIO;
- }
-
- for (pos = 0; pos < curlen; pos += len) {
- len = curlen - pos;
- if (len > sizeof(tmpbuf))
- len = sizeof(tmpbuf);
-
- err = nfp_cpp_area_read(area, pos, tmpbuf, len);
- if (err < 0) {
- RTE_LOG(ERR, PMD, "nfp_cpp_area_read error\n");
- nfp_cpp_area_release(area);
- nfp_cpp_area_free(area);
- return -EIO;
- }
- PMD_CPP_LOG(DEBUG, "%s: sending %u of %zu\n", __func__,
- len, count);
-
- err = send(sockfd, tmpbuf, len, 0);
- if (err != (int)len) {
- RTE_LOG(ERR, PMD,
- "%s: error when sending: %d of %zu\n",
- __func__, err, count);
- nfp_cpp_area_release(area);
- nfp_cpp_area_free(area);
- return -EIO;
- }
- }
-
- nfp_offset += pos;
- totlen += pos;
- nfp_cpp_area_release(area);
- nfp_cpp_area_free(area);
-
- count -= pos;
- curlen = (count > NFP_CPP_MEMIO_BOUNDARY) ?
- NFP_CPP_MEMIO_BOUNDARY : count;
- }
- return 0;
-}
-
-#define NFP_IOCTL 'n'
-#define NFP_IOCTL_CPP_IDENTIFICATION _IOW(NFP_IOCTL, 0x8f, uint32_t)
-/*
- * Serving a ioctl command from host NFP tools. This usually goes to
- * a kernel driver char driver but it is not available when the PF is
- * bound to the PMD. Currently just one ioctl command is served and it
- * does not require any CPP access at all.
- */
-static int
-nfp_cpp_bridge_serve_ioctl(int sockfd, struct nfp_cpp *cpp)
-{
- uint32_t cmd, ident_size, tmp;
- int err;
-
- /* Reading now the IOCTL command */
- err = recv(sockfd, &cmd, 4, 0);
- if (err != 4) {
- RTE_LOG(ERR, PMD, "%s: read error from socket\n", __func__);
- return -EIO;
- }
-
- /* Only supporting NFP_IOCTL_CPP_IDENTIFICATION */
- if (cmd != NFP_IOCTL_CPP_IDENTIFICATION) {
- RTE_LOG(ERR, PMD, "%s: unknown cmd %d\n", __func__, cmd);
- return -EINVAL;
- }
-
- err = recv(sockfd, &ident_size, 4, 0);
- if (err != 4) {
- RTE_LOG(ERR, PMD, "%s: read error from socket\n", __func__);
- return -EIO;
- }
-
- tmp = nfp_cpp_model(cpp);
-
- PMD_CPP_LOG(DEBUG, "%s: sending NFP model %08x\n", __func__, tmp);
-
- err = send(sockfd, &tmp, 4, 0);
- if (err != 4) {
- RTE_LOG(ERR, PMD, "%s: error writing to socket\n", __func__);
- return -EIO;
- }
-
- tmp = cpp->interface;
-
- PMD_CPP_LOG(DEBUG, "%s: sending NFP interface %08x\n", __func__, tmp);
-
- err = send(sockfd, &tmp, 4, 0);
- if (err != 4) {
- RTE_LOG(ERR, PMD, "%s: error writing to socket\n", __func__);
- return -EIO;
- }
-
- return 0;
-}
-
-#define NFP_BRIDGE_OP_READ 20
-#define NFP_BRIDGE_OP_WRITE 30
-#define NFP_BRIDGE_OP_IOCTL 40
-
-/*
- * This is the code to be executed by a service core. The CPP bridge interface
- * is based on a unix socket and requests usually received by a kernel char
- * driver, read, write and ioctl, are handled by the CPP bridge. NFP host tools
- * can be executed with a wrapper library and LD_LIBRARY being completely
- * unaware of the CPP bridge performing the NFP kernel char driver for CPP
- * accesses.
- */
-static int32_t
-nfp_cpp_bridge_service_func(void *args)
-{
- struct sockaddr address;
- struct nfp_cpp *cpp = args;
- int sockfd, datafd, op, ret;
-
- unlink("/tmp/nfp_cpp");
- sockfd = socket(AF_UNIX, SOCK_STREAM, 0);
- if (sockfd < 0) {
- RTE_LOG(ERR, PMD, "%s: socket creation error. Service failed\n",
- __func__);
- return -EIO;
- }
-
- memset(&address, 0, sizeof(struct sockaddr));
-
- address.sa_family = AF_UNIX;
- strcpy(address.sa_data, "/tmp/nfp_cpp");
-
- ret = bind(sockfd, (const struct sockaddr *)&address,
- sizeof(struct sockaddr));
- if (ret < 0) {
- RTE_LOG(ERR, PMD, "%s: bind error (%d). Service failed\n",
- __func__, errno);
- close(sockfd);
- return ret;
- }
-
- ret = listen(sockfd, 20);
- if (ret < 0) {
- RTE_LOG(ERR, PMD, "%s: listen error(%d). Service failed\n",
- __func__, errno);
- close(sockfd);
- return ret;
- }
-
- for (;;) {
- datafd = accept(sockfd, NULL, NULL);
- if (datafd < 0) {
- RTE_LOG(ERR, PMD, "%s: accept call error (%d)\n",
- __func__, errno);
- RTE_LOG(ERR, PMD, "%s: service failed\n", __func__);
- close(sockfd);
- return -EIO;
- }
-
- while (1) {
- ret = recv(datafd, &op, 4, 0);
- if (ret <= 0) {
- PMD_CPP_LOG(DEBUG, "%s: socket close\n",
- __func__);
- break;
- }
-
- PMD_CPP_LOG(DEBUG, "%s: getting op %u\n", __func__, op);
-
- if (op == NFP_BRIDGE_OP_READ)
- nfp_cpp_bridge_serve_read(datafd, cpp);
-
- if (op == NFP_BRIDGE_OP_WRITE)
- nfp_cpp_bridge_serve_write(datafd, cpp);
-
- if (op == NFP_BRIDGE_OP_IOCTL)
- nfp_cpp_bridge_serve_ioctl(datafd, cpp);
-
- if (op == 0)
- break;
- }
- close(datafd);
- }
- close(sockfd);
-
- return 0;
-}
-
-static int
-nfp_pf_create_dev(struct rte_pci_device *dev, int port, int ports,
- struct nfp_cpp *cpp, struct nfp_hwinfo *hwinfo,
- int phys_port, struct nfp_rtsym_table *sym_tbl, void **priv)
-{
- struct rte_eth_dev *eth_dev;
- struct nfp_net_hw *hw = NULL;
- char *port_name;
- struct rte_service_spec service;
- int retval;
+ hw->cap & NFP_NET_CFG_CTRL_TXVLAN ? "TXVLAN " : "",
+ hw->cap & NFP_NET_CFG_CTRL_SCATTER ? "SCATTER " : "",
+ hw->cap & NFP_NET_CFG_CTRL_GATHER ? "GATHER " : "",
+ hw->cap & NFP_NET_CFG_CTRL_LIVE_ADDR ? "LIVE_ADDR " : "",
+ hw->cap & NFP_NET_CFG_CTRL_LSO ? "TSO " : "",
+ hw->cap & NFP_NET_CFG_CTRL_LSO2 ? "TSOv2 " : "",
+ hw->cap & NFP_NET_CFG_CTRL_RSS ? "RSS " : "",
+ hw->cap & NFP_NET_CFG_CTRL_RSS2 ? "RSSv2 " : "");
- port_name = rte_zmalloc("nfp_pf_port_name", 100, 0);
- if (!port_name)
- return -ENOMEM;
+ hw->ctrl = 0;
- if (ports > 1)
- snprintf(port_name, 100, "%s_port%d", dev->device.name, port);
- else
- strlcat(port_name, dev->device.name, 100);
+ hw->stride_rx = stride;
+ hw->stride_tx = stride;
+ PMD_INIT_LOG(INFO, "max_rx_queues: %u, max_tx_queues: %u",
+ hw->max_rx_queues, hw->max_tx_queues);
- if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
- eth_dev = rte_eth_dev_allocate(port_name);
- if (!eth_dev) {
- rte_free(port_name);
- return -ENODEV;
- }
- if (port == 0) {
- *priv = rte_zmalloc(port_name,
- sizeof(struct nfp_net_adapter) *
- ports, RTE_CACHE_LINE_SIZE);
- if (!*priv) {
- rte_free(port_name);
- rte_eth_dev_release_port(eth_dev);
- return -ENOMEM;
- }
- }
- eth_dev->data->dev_private = *priv;
+ /* Initializing spinlock for reconfigs */
+ rte_spinlock_init(&hw->reconfig_lock);
- /*
- * dev_private pointing to port0 dev_private because we need
- * to configure vNIC bars based on port0 at nfp_net_init.
- * Then dev_private is adjusted per port.
- */
- hw = (struct nfp_net_hw *)(eth_dev->data->dev_private) + port;
- hw->cpp = cpp;
- hw->hwinfo = hwinfo;
- hw->sym_tbl = sym_tbl;
- hw->pf_port_idx = phys_port;
- hw->is_pf = 1;
- if (ports > 1)
- hw->pf_multiport_enabled = 1;
-
- hw->total_ports = ports;
- } else {
- eth_dev = rte_eth_dev_attach_secondary(port_name);
- if (!eth_dev) {
- RTE_LOG(ERR, EAL, "secondary process attach failed, "
- "ethdev doesn't exist");
- rte_free(port_name);
- return -ENODEV;
- }
- eth_dev->process_private = cpp;
+ /* Allocating memory for mac addr */
+ eth_dev->data->mac_addrs = rte_zmalloc("mac_addr",
+ RTE_ETHER_ADDR_LEN, 0);
+ if (eth_dev->data->mac_addrs == NULL) {
+ PMD_INIT_LOG(ERR, "Failed to space for MAC address");
+ err = -ENOMEM;
+ goto dev_err_queues_map;
}
- eth_dev->device = &dev->device;
- rte_eth_copy_pci_info(eth_dev, dev);
-
- retval = nfp_net_init(eth_dev);
-
- if (retval) {
- retval = -ENODEV;
- goto probe_failed;
- } else {
- rte_eth_dev_probing_finish(eth_dev);
+ if (hw->is_phyport) {
+ nfp_net_pf_read_mac(pf_dev, port);
+ nfp_net_write_mac(hw, (uint8_t *)&hw->mac_addr);
}
- rte_free(port_name);
+ if (!rte_is_valid_assigned_ether_addr(
+ (struct rte_ether_addr *)&hw->mac_addr)) {
+ PMD_INIT_LOG(INFO, "Using random mac address for port %d",
+ port);
+ /* Using random mac addresses for VFs */
+ rte_eth_random_addr(&hw->mac_addr[0]);
+ nfp_net_write_mac(hw, (uint8_t *)&hw->mac_addr);
+ }
- if (port == 0) {
- /*
- * The rte_service needs to be created just once per PMD.
- * And the cpp handler needs to be linked to the service.
- * Secondary processes will be used for debugging DPDK apps
- * when requiring to use the CPP interface for accessing NFP
- * components. And the cpp handler for secondary processes is
- * available at this point.
- */
- memset(&service, 0, sizeof(struct rte_service_spec));
- snprintf(service.name, sizeof(service.name), "nfp_cpp_service");
- service.callback = nfp_cpp_bridge_service_func;
- service.callback_userdata = (void *)cpp;
+ /* Copying mac address to DPDK eth_dev struct */
+ rte_ether_addr_copy((struct rte_ether_addr *)hw->mac_addr,
+ ð_dev->data->mac_addrs[0]);
- hw = (struct nfp_net_hw *)(eth_dev->data->dev_private);
+ if (!(hw->cap & NFP_NET_CFG_CTRL_LIVE_ADDR))
+ eth_dev->data->dev_flags |= RTE_ETH_DEV_NOLIVE_MAC_ADDR;
- if (rte_service_component_register(&service,
- &hw->nfp_cpp_service_id))
- RTE_LOG(ERR, PMD, "NFP CPP bridge service register() failed");
- else
- RTE_LOG(DEBUG, PMD, "NFP CPP bridge service registered");
- }
+ eth_dev->data->dev_flags |= RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS;
- return retval;
+ PMD_INIT_LOG(INFO, "port %d VendorID=0x%x DeviceID=0x%x "
+ "mac=%02x:%02x:%02x:%02x:%02x:%02x",
+ eth_dev->data->port_id, pci_dev->id.vendor_id,
+ pci_dev->id.device_id,
+ hw->mac_addr[0], hw->mac_addr[1], hw->mac_addr[2],
+ hw->mac_addr[3], hw->mac_addr[4], hw->mac_addr[5]);
-probe_failed:
- rte_free(port_name);
- /* free ports private data if primary process */
if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
- rte_free(eth_dev->data->dev_private);
- eth_dev->data->dev_private = NULL;
+ /* Registering LSC interrupt handler */
+ rte_intr_callback_register(&pci_dev->intr_handle,
+ nfp_net_dev_interrupt_handler,
+ (void *)eth_dev);
+ /* Telling the firmware about the LSC interrupt entry */
+ nn_cfg_writeb(hw, NFP_NET_CFG_LSC, NFP_NET_IRQ_LSC_IDX);
+ /* Recording current stats counters values */
+ nfp_net_stats_reset(eth_dev);
}
- rte_eth_dev_release_port(eth_dev);
- return retval;
+ return 0;
+
+dev_err_queues_map:
+ nfp_cpp_area_free(hw->hwqueues_area);
+dev_err_ctrl_map:
+ nfp_cpp_area_free(hw->ctrl_area);
+
+ return err;
}
#define DEFAULT_FW_PATH "/lib/firmware/netronome"
nfp_fw_upload(struct rte_pci_device *dev, struct nfp_nsp *nsp, char *card)
{
struct nfp_cpp *cpp = nsp->cpp;
- int fw_f;
- char *fw_buf;
+ void *fw_buf;
char fw_name[125];
char serial[40];
- struct stat file_stat;
- off_t fsize, bytes;
+ size_t fsize;
/* Looking for firmware file in order of priority */
snprintf(fw_name, sizeof(fw_name), "%s/%s.nffw", DEFAULT_FW_PATH,
serial);
-
PMD_DRV_LOG(DEBUG, "Trying with fw file: %s", fw_name);
- fw_f = open(fw_name, O_RDONLY);
- if (fw_f >= 0)
- goto read_fw;
+ if (rte_firmware_read(fw_name, &fw_buf, &fsize) == 0)
+ goto load_fw;
/* Then try the PCI name */
snprintf(fw_name, sizeof(fw_name), "%s/pci-%s.nffw", DEFAULT_FW_PATH,
dev->device.name);
-
PMD_DRV_LOG(DEBUG, "Trying with fw file: %s", fw_name);
- fw_f = open(fw_name, O_RDONLY);
- if (fw_f >= 0)
- goto read_fw;
+ if (rte_firmware_read(fw_name, &fw_buf, &fsize) == 0)
+ goto load_fw;
/* Finally try the card type and media */
snprintf(fw_name, sizeof(fw_name), "%s/%s", DEFAULT_FW_PATH, card);
PMD_DRV_LOG(DEBUG, "Trying with fw file: %s", fw_name);
- fw_f = open(fw_name, O_RDONLY);
- if (fw_f < 0) {
+ if (rte_firmware_read(fw_name, &fw_buf, &fsize) < 0) {
PMD_DRV_LOG(INFO, "Firmware file %s not found.", fw_name);
return -ENOENT;
}
-read_fw:
- if (fstat(fw_f, &file_stat) < 0) {
- PMD_DRV_LOG(INFO, "Firmware file %s size is unknown", fw_name);
- close(fw_f);
- return -ENOENT;
- }
-
- fsize = file_stat.st_size;
- PMD_DRV_LOG(INFO, "Firmware file found at %s with size: %" PRIu64 "",
- fw_name, (uint64_t)fsize);
-
- fw_buf = malloc((size_t)fsize);
- if (!fw_buf) {
- PMD_DRV_LOG(INFO, "malloc failed for fw buffer");
- close(fw_f);
- return -ENOMEM;
- }
- memset(fw_buf, 0, fsize);
-
- bytes = read(fw_f, fw_buf, fsize);
- if (bytes != fsize) {
- PMD_DRV_LOG(INFO, "Reading fw to buffer failed."
- "Just %" PRIu64 " of %" PRIu64 " bytes read",
- (uint64_t)bytes, (uint64_t)fsize);
- free(fw_buf);
- close(fw_f);
- return -EIO;
- }
+load_fw:
+ PMD_DRV_LOG(INFO, "Firmware file found at %s with size: %zu",
+ fw_name, fsize);
PMD_DRV_LOG(INFO, "Uploading the firmware ...");
- nfp_nsp_load_fw(nsp, fw_buf, bytes);
+ nfp_nsp_load_fw(nsp, fw_buf, fsize);
PMD_DRV_LOG(INFO, "Done");
free(fw_buf);
- close(fw_f);
-
return 0;
}
return err;
}
-static int nfp_pf_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
- struct rte_pci_device *dev)
+static int nfp_init_phyports(struct nfp_pf_dev *pf_dev)
+{
+ struct nfp_net_hw *hw;
+ struct rte_eth_dev *eth_dev;
+ struct nfp_eth_table *nfp_eth_table = NULL;
+ int ret = 0;
+ int i;
+
+ nfp_eth_table = nfp_eth_read_ports(pf_dev->cpp);
+ if (!nfp_eth_table) {
+ PMD_INIT_LOG(ERR, "Error reading NFP ethernet table");
+ ret = -EIO;
+ goto error;
+ }
+
+ /* Loop through all physical ports on PF */
+ for (i = 0; i < pf_dev->total_phyports; i++) {
+ const unsigned int numa_node = rte_socket_id();
+ char port_name[RTE_ETH_NAME_MAX_LEN];
+
+ snprintf(port_name, sizeof(port_name), "%s_port%d",
+ pf_dev->pci_dev->device.name, i);
+
+ /* Allocate a eth_dev for this phyport */
+ eth_dev = rte_eth_dev_allocate(port_name);
+ if (!eth_dev) {
+ ret = -ENODEV;
+ goto port_cleanup;
+ }
+
+ /* Allocate memory for this phyport */
+ eth_dev->data->dev_private =
+ rte_zmalloc_socket(port_name, sizeof(struct nfp_net_hw),
+ RTE_CACHE_LINE_SIZE, numa_node);
+ if (!eth_dev->data->dev_private) {
+ ret = -ENOMEM;
+ rte_eth_dev_release_port(eth_dev);
+ goto port_cleanup;
+ }
+
+ hw = NFP_NET_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
+
+ /* Add this device to the PF's array of physical ports */
+ pf_dev->ports[i] = hw;
+
+ hw->pf_dev = pf_dev;
+ hw->cpp = pf_dev->cpp;
+ hw->eth_dev = eth_dev;
+ hw->idx = i;
+ hw->nfp_idx = nfp_eth_table->ports[i].index;
+ hw->is_phyport = true;
+
+ eth_dev->device = &pf_dev->pci_dev->device;
+
+ /* ctrl/tx/rx BAR mappings and remaining init happens in
+ * nfp_net_init
+ */
+ ret = nfp_net_init(eth_dev);
+
+ if (ret) {
+ ret = -ENODEV;
+ goto port_cleanup;
+ }
+
+ rte_eth_dev_probing_finish(eth_dev);
+
+ } /* End loop, all ports on this PF */
+ ret = 0;
+ goto eth_table_cleanup;
+
+port_cleanup:
+ for (i = 0; i < pf_dev->total_phyports; i++) {
+ if (pf_dev->ports[i] && pf_dev->ports[i]->eth_dev) {
+ struct rte_eth_dev *tmp_dev;
+ tmp_dev = pf_dev->ports[i]->eth_dev;
+ rte_eth_dev_release_port(tmp_dev);
+ pf_dev->ports[i] = NULL;
+ }
+ }
+eth_table_cleanup:
+ free(nfp_eth_table);
+error:
+ return ret;
+}
+
+static int nfp_pf_init(struct rte_pci_device *pci_dev)
{
+ struct nfp_pf_dev *pf_dev = NULL;
struct nfp_cpp *cpp;
struct nfp_hwinfo *hwinfo;
struct nfp_rtsym_table *sym_tbl;
struct nfp_eth_table *nfp_eth_table = NULL;
+ char name[RTE_ETH_NAME_MAX_LEN];
int total_ports;
- void *priv = 0;
int ret = -ENODEV;
int err;
- int i;
- if (!dev)
+ if (!pci_dev)
return ret;
/*
* interface. Here we avoid this telling to the CPP init code to
* use a lock file if UIO is being used.
*/
- if (dev->kdrv == RTE_PCI_KDRV_VFIO)
- cpp = nfp_cpp_from_device_name(dev, 0);
+ if (pci_dev->kdrv == RTE_PCI_KDRV_VFIO)
+ cpp = nfp_cpp_from_device_name(pci_dev, 0);
else
- cpp = nfp_cpp_from_device_name(dev, 1);
+ cpp = nfp_cpp_from_device_name(pci_dev, 1);
if (!cpp) {
- PMD_DRV_LOG(ERR, "A CPP handle can not be obtained");
+ PMD_INIT_LOG(ERR, "A CPP handle can not be obtained");
ret = -EIO;
goto error;
}
hwinfo = nfp_hwinfo_read(cpp);
if (!hwinfo) {
- PMD_DRV_LOG(ERR, "Error reading hwinfo table");
- return -EIO;
+ PMD_INIT_LOG(ERR, "Error reading hwinfo table");
+ ret = -EIO;
+ goto error;
}
nfp_eth_table = nfp_eth_read_ports(cpp);
if (!nfp_eth_table) {
- PMD_DRV_LOG(ERR, "Error reading NFP ethernet table");
- return -EIO;
+ PMD_INIT_LOG(ERR, "Error reading NFP ethernet table");
+ ret = -EIO;
+ goto hwinfo_cleanup;
}
- if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
- if (nfp_fw_setup(dev, cpp, nfp_eth_table, hwinfo)) {
- PMD_DRV_LOG(INFO, "Error when uploading firmware");
- ret = -EIO;
- goto error;
- }
+ if (nfp_fw_setup(pci_dev, cpp, nfp_eth_table, hwinfo)) {
+ PMD_INIT_LOG(ERR, "Error when uploading firmware");
+ ret = -EIO;
+ goto eth_table_cleanup;
}
/* Now the symbol table should be there */
sym_tbl = nfp_rtsym_table_read(cpp);
if (!sym_tbl) {
- PMD_DRV_LOG(ERR, "Something is wrong with the firmware"
+ PMD_INIT_LOG(ERR, "Something is wrong with the firmware"
" symbol table");
ret = -EIO;
- goto error;
+ goto eth_table_cleanup;
}
total_ports = nfp_rtsym_read_le(sym_tbl, "nfd_cfg_pf0_num_ports", &err);
if (total_ports != (int)nfp_eth_table->count) {
PMD_DRV_LOG(ERR, "Inconsistent number of ports");
ret = -EIO;
- goto error;
+ goto sym_tbl_cleanup;
}
- PMD_INIT_LOG(INFO, "Total pf ports: %d", total_ports);
+
+ PMD_INIT_LOG(INFO, "Total physical ports: %d", total_ports);
if (total_ports <= 0 || total_ports > 8) {
- PMD_DRV_LOG(ERR, "nfd_cfg_pf0_num_ports symbol with wrong value");
+ PMD_INIT_LOG(ERR, "nfd_cfg_pf0_num_ports symbol with wrong value");
ret = -ENODEV;
- goto error;
+ goto sym_tbl_cleanup;
+ }
+ /* Allocate memory for the PF "device" */
+ snprintf(name, sizeof(name), "nfp_pf%d", 0);
+ pf_dev = rte_zmalloc(name, sizeof(*pf_dev), 0);
+ if (!pf_dev) {
+ ret = -ENOMEM;
+ goto sym_tbl_cleanup;
}
- for (i = 0; i < total_ports; i++) {
- ret = nfp_pf_create_dev(dev, i, total_ports, cpp, hwinfo,
- nfp_eth_table->ports[i].index,
- sym_tbl, &priv);
- if (ret)
- break;
+ /* Populate the newly created PF device */
+ pf_dev->cpp = cpp;
+ pf_dev->hwinfo = hwinfo;
+ pf_dev->sym_tbl = sym_tbl;
+ pf_dev->total_phyports = total_ports;
+
+ if (total_ports > 1)
+ pf_dev->multiport = true;
+
+ pf_dev->pci_dev = pci_dev;
+
+ /* Map the symbol table */
+ pf_dev->ctrl_bar = nfp_rtsym_map(pf_dev->sym_tbl, "_pf0_net_bar0",
+ pf_dev->total_phyports * 32768,
+ &pf_dev->ctrl_area);
+ if (!pf_dev->ctrl_bar) {
+ PMD_INIT_LOG(ERR, "nfp_rtsym_map fails for _pf0_net_ctrl_bar");
+ ret = -EIO;
+ goto pf_cleanup;
}
-error:
+ PMD_INIT_LOG(DEBUG, "ctrl bar: %p", pf_dev->ctrl_bar);
+
+ /* configure access to tx/rx vNIC BARs */
+ pf_dev->hw_queues = nfp_cpp_map_area(pf_dev->cpp, 0, 0,
+ NFP_PCIE_QUEUE(0),
+ NFP_QCP_QUEUE_AREA_SZ,
+ &pf_dev->hwqueues_area);
+ if (!pf_dev->hw_queues) {
+ PMD_INIT_LOG(ERR, "nfp_rtsym_map fails for net.qc");
+ ret = -EIO;
+ goto ctrl_area_cleanup;
+ }
+
+ PMD_INIT_LOG(DEBUG, "tx/rx bar address: 0x%p", pf_dev->hw_queues);
+
+ /* Initialize and prep physical ports now
+ * This will loop through all physical ports
+ */
+ ret = nfp_init_phyports(pf_dev);
+ if (ret) {
+ PMD_INIT_LOG(ERR, "Could not create physical ports");
+ goto hwqueues_cleanup;
+ }
+
+ /* register the CPP bridge service here for primary use */
+ nfp_register_cpp_service(pf_dev->cpp);
+
+ return 0;
+
+hwqueues_cleanup:
+ nfp_cpp_area_free(pf_dev->hwqueues_area);
+ctrl_area_cleanup:
+ nfp_cpp_area_free(pf_dev->ctrl_area);
+pf_cleanup:
+ rte_free(pf_dev);
+sym_tbl_cleanup:
+ free(sym_tbl);
+eth_table_cleanup:
free(nfp_eth_table);
+hwinfo_cleanup:
+ free(hwinfo);
+error:
return ret;
}
+/*
+ * When attaching to the NFP4000/6000 PF on a secondary process there
+ * is no need to initialize the PF again. Only minimal work is required
+ * here
+ */
+static int nfp_pf_secondary_init(struct rte_pci_device *pci_dev)
+{
+ struct nfp_cpp *cpp;
+ struct nfp_rtsym_table *sym_tbl;
+ int total_ports;
+ int i;
+ int err;
+
+ if (!pci_dev)
+ return -ENODEV;
+
+ /*
+ * When device bound to UIO, the device could be used, by mistake,
+ * by two DPDK apps, and the UIO driver does not avoid it. This
+ * could lead to a serious problem when configuring the NFP CPP
+ * interface. Here we avoid this telling to the CPP init code to
+ * use a lock file if UIO is being used.
+ */
+ if (pci_dev->kdrv == RTE_PCI_KDRV_VFIO)
+ cpp = nfp_cpp_from_device_name(pci_dev, 0);
+ else
+ cpp = nfp_cpp_from_device_name(pci_dev, 1);
+
+ if (!cpp) {
+ PMD_INIT_LOG(ERR, "A CPP handle can not be obtained");
+ return -EIO;
+ }
+
+ /*
+ * We don't have access to the PF created in the primary process
+ * here so we have to read the number of ports from firmware
+ */
+ sym_tbl = nfp_rtsym_table_read(cpp);
+ if (!sym_tbl) {
+ PMD_INIT_LOG(ERR, "Something is wrong with the firmware"
+ " symbol table");
+ return -EIO;
+ }
+
+ total_ports = nfp_rtsym_read_le(sym_tbl, "nfd_cfg_pf0_num_ports", &err);
+
+ for (i = 0; i < total_ports; i++) {
+ struct rte_eth_dev *eth_dev;
+ char port_name[RTE_ETH_NAME_MAX_LEN];
+
+ snprintf(port_name, sizeof(port_name), "%s_port%d",
+ pci_dev->device.name, i);
+
+ PMD_DRV_LOG(DEBUG, "Secondary attaching to port %s",
+ port_name);
+ eth_dev = rte_eth_dev_attach_secondary(port_name);
+ if (!eth_dev) {
+ RTE_LOG(ERR, EAL,
+ "secondary process attach failed, "
+ "ethdev doesn't exist");
+ return -ENODEV;
+ }
+ eth_dev->process_private = cpp;
+ eth_dev->dev_ops = &nfp_net_eth_dev_ops;
+ eth_dev->rx_queue_count = nfp_net_rx_queue_count;
+ eth_dev->rx_pkt_burst = &nfp_net_recv_pkts;
+ eth_dev->tx_pkt_burst = &nfp_net_xmit_pkts;
+ rte_eth_dev_probing_finish(eth_dev);
+ }
+
+ /* Register the CPP bridge service for the secondary too */
+ nfp_register_cpp_service(cpp);
+
+ return 0;
+}
+
+static int nfp_pf_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
+ struct rte_pci_device *dev)
+{
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ return nfp_pf_init(dev);
+ else
+ return nfp_pf_secondary_init(dev);
+}
+
static const struct rte_pci_id pci_id_nfp_pf_net_map[] = {
{
RTE_PCI_DEVICE(PCI_VENDOR_ID_NETRONOME,
},
};
-static const struct rte_pci_id pci_id_nfp_vf_net_map[] = {
- {
- RTE_PCI_DEVICE(PCI_VENDOR_ID_NETRONOME,
- PCI_DEVICE_ID_NFP6000_VF_NIC)
- },
- {
- .vendor_id = 0,
- },
-};
-
-static int eth_nfp_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
- struct rte_pci_device *pci_dev)
+static int nfp_pci_uninit(struct rte_eth_dev *eth_dev)
{
- return rte_eth_dev_pci_generic_probe(pci_dev,
- sizeof(struct nfp_net_adapter), nfp_net_init);
-}
+ struct rte_pci_device *pci_dev;
+ uint16_t port_id;
-static int eth_nfp_pci_remove(struct rte_pci_device *pci_dev)
-{
- struct rte_eth_dev *eth_dev;
- struct nfp_net_hw *hw, *hwport0;
- int port = 0;
+ pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
- eth_dev = rte_eth_dev_allocated(pci_dev->device.name);
- if (eth_dev == NULL)
- return 0; /* port already released */
- if ((pci_dev->id.device_id == PCI_DEVICE_ID_NFP4000_PF_NIC) ||
- (pci_dev->id.device_id == PCI_DEVICE_ID_NFP6000_PF_NIC)) {
- port = get_pf_port_number(eth_dev->data->name);
+ if (pci_dev->id.device_id == PCI_DEVICE_ID_NFP4000_PF_NIC ||
+ pci_dev->id.device_id == PCI_DEVICE_ID_NFP6000_PF_NIC) {
+ /* Free up all physical ports under PF */
+ RTE_ETH_FOREACH_DEV_OF(port_id, &pci_dev->device)
+ rte_eth_dev_close(port_id);
/*
- * hotplug is not possible with multiport PF although freeing
- * data structures can be done for first port.
+ * Ports can be closed and freed but hotplugging is not
+ * currently supported
*/
- if (port != 0)
- return -ENOTSUP;
- hwport0 = NFP_NET_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
- hw = &hwport0[port];
- nfp_cpp_area_free(hw->ctrl_area);
- nfp_cpp_area_free(hw->hwqueues_area);
- free(hw->hwinfo);
- free(hw->sym_tbl);
- nfp_cpp_free(hw->cpp);
- } else {
- hw = NFP_NET_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
- }
- /* hotplug is not possible with multiport PF */
- if (hw->pf_multiport_enabled)
return -ENOTSUP;
- return rte_eth_dev_pci_generic_remove(pci_dev, NULL);
+ }
+
+ /* VF cleanup, just free private port data */
+ return nfp_net_close(eth_dev);
+}
+
+static int eth_nfp_pci_remove(struct rte_pci_device *pci_dev)
+{
+ return rte_eth_dev_pci_generic_remove(pci_dev, nfp_pci_uninit);
}
static struct rte_pci_driver rte_nfp_net_pf_pmd = {
.remove = eth_nfp_pci_remove,
};
-static struct rte_pci_driver rte_nfp_net_vf_pmd = {
- .id_table = pci_id_nfp_vf_net_map,
- .drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_INTR_LSC,
- .probe = eth_nfp_pci_probe,
- .remove = eth_nfp_pci_remove,
-};
-
RTE_PMD_REGISTER_PCI(net_nfp_pf, rte_nfp_net_pf_pmd);
-RTE_PMD_REGISTER_PCI(net_nfp_vf, rte_nfp_net_vf_pmd);
RTE_PMD_REGISTER_PCI_TABLE(net_nfp_pf, pci_id_nfp_pf_net_map);
-RTE_PMD_REGISTER_PCI_TABLE(net_nfp_vf, pci_id_nfp_vf_net_map);
RTE_PMD_REGISTER_KMOD_DEP(net_nfp_pf, "* igb_uio | uio_pci_generic | vfio");
-RTE_PMD_REGISTER_KMOD_DEP(net_nfp_vf, "* igb_uio | uio_pci_generic | vfio");
-RTE_LOG_REGISTER(nfp_logtype_init, pmd.net.nfp.init, NOTICE);
-RTE_LOG_REGISTER(nfp_logtype_driver, pmd.net.nfp.driver, NOTICE);
+RTE_LOG_REGISTER_SUFFIX(nfp_logtype_init, init, NOTICE);
+RTE_LOG_REGISTER_SUFFIX(nfp_logtype_driver, driver, NOTICE);
/*
* Local variables:
* c-file-style: "Linux"