net/cnxk: support link status update

[dpdk.git] / doc / guides / bbdevs / fpga_5gnr_fec.rst

diff --git a/doc/guides/bbdevs/fpga_5gnr_fec.rst b/doc/guides/bbdevs/fpga_5gnr_fec.rst
index 78c1ce7..9d71585 100644 (file)
--- a/doc/guides/bbdevs/fpga_5gnr_fec.rst
+++ b/doc/guides/bbdevs/fpga_5gnr_fec.rst
@@ -82,7 +82,7 @@ Bind PF UIO driver(s)
 Install the DPDK igb_uio driver, bind it with the PF PCI device ID and use
 ``lspci`` to confirm the PF device is under use by ``igb_uio`` DPDK UIO driver.
 
 Install the DPDK igb_uio driver, bind it with the PF PCI device ID and use
 ``lspci`` to confirm the PF device is under use by ``igb_uio`` DPDK UIO driver.
 

-The igb_uio driver may be bound to the PF PCI device using one of three methods:
+The igb_uio driver may be bound to the PF PCI device using one of two methods:

 
 
 1. PCI functions (physical or virtual, depending on the use case) can be bound to
 
 
 1. PCI functions (physical or virtual, depending on the use case) can be bound to


@@ -105,20 +105,6 @@ the UIO driver by repeating this command for every function.
 where the PCI device ID (example: 0000:06:00.0) is obtained using lspci -vd8086:0d8f
 
 
 where the PCI device ID (example: 0000:06:00.0) is obtained using lspci -vd8086:0d8f
 
 

-3. A third way to bind is to use ``dpdk-setup.sh`` tool
-
-.. code-block:: console
-
-  cd <dpdk-top-level-directory>
-  ./usertools/dpdk-setup.sh
-
-  select 'Bind Ethernet/Crypto/Baseband device to IGB UIO module'
-  or
-  select 'Bind Ethernet/Crypto/Baseband device to VFIO module' depending on driver required
-  enter PCI device ID
-  select 'Display current Ethernet/Crypto/Baseband device settings' to confirm binding
-
-

 In the same way the FPGA 5GNR FEC PF can be bound with vfio, but vfio driver does not
 support SR-IOV configuration right out of the box, so it will need to be patched.
 
 In the same way the FPGA 5GNR FEC PF can be bound with vfio, but vfio driver does not
 support SR-IOV configuration right out of the box, so it will need to be patched.
 


@@ -304,4 +290,4 @@ Specifically for the BBDEV FPGA 5GNR FEC PMD, the command below can be used:
 .. code-block:: console
 
   ./pf_bb_config FPGA_5GNR -c fpga_5gnr/fpga_5gnr_config_vf.cfg
 .. code-block:: console
 
   ./pf_bb_config FPGA_5GNR -c fpga_5gnr/fpga_5gnr_config_vf.cfg

-  ./test-bbdev.py -e="-c 0xff0 -w${VF_PCI_ADDR}" -c validation -n 64 -b 32 -l 1 -v ./ldpc_dec_default.data
+  ./test-bbdev.py -e="-c 0xff0 -a${VF_PCI_ADDR}" -c validation -n 64 -b 32 -l 1 -v ./ldpc_dec_default.data