doc: fix crypto perf script guide

[dpdk.git] / doc / guides / bbdevs / fpga_lte_fec.rst

diff --git a/doc/guides/bbdevs/fpga_lte_fec.rst b/doc/guides/bbdevs/fpga_lte_fec.rst
index e268e5b..c3379c2 100644 (file)
--- a/doc/guides/bbdevs/fpga_lte_fec.rst
+++ b/doc/guides/bbdevs/fpga_lte_fec.rst
@@ -81,7 +81,7 @@ Bind PF UIO driver(s)
 Install the DPDK igb_uio driver, bind it with the PF PCI device ID and use
 ``lspci`` to confirm the PF device is under use by ``igb_uio`` DPDK UIO driver.
 
 Install the DPDK igb_uio driver, bind it with the PF PCI device ID and use
 ``lspci`` to confirm the PF device is under use by ``igb_uio`` DPDK UIO driver.
 

-The igb_uio driver may be bound to the PF PCI device using one of three methods:
+The igb_uio driver may be bound to the PF PCI device using one of two methods:

 
 
 1. PCI functions (physical or virtual, depending on the use case) can be bound to
 
 
 1. PCI functions (physical or virtual, depending on the use case) can be bound to


@@ -104,20 +104,6 @@ the UIO driver by repeating this command for every function.
 where the PCI device ID (example: 0000:06:00.0) is obtained using lspci -vd1172:
 
 
 where the PCI device ID (example: 0000:06:00.0) is obtained using lspci -vd1172:
 
 

-3. A third way to bind is to use ``dpdk-setup.sh`` tool
-
-.. code-block:: console
-
-  cd <dpdk-top-level-directory>
-  ./usertools/dpdk-setup.sh
-
-  select 'Bind Ethernet/Crypto/Baseband device to IGB UIO module'
-  or
-  select 'Bind Ethernet/Crypto/Baseband device to VFIO module' depending on driver required
-  enter PCI device ID
-  select 'Display current Ethernet/Crypto/Baseband device settings' to confirm binding
-
-

 In the same way the FPGA LTE FEC PF can be bound with vfio, but vfio driver does not
 support SR-IOV configuration right out of the box, so it will need to be patched.
 
 In the same way the FPGA LTE FEC PF can be bound with vfio, but vfio driver does not
 support SR-IOV configuration right out of the box, so it will need to be patched.