-If you are running on kernel 4.4 or greater, see instructions for
-`Installation using kernel.org driver`_ below. If you are on a kernel earlier
-than 4.4, see `Installation using 01.org QAT driver`_.
-
-For **Intel QuickAssist Technology C62x** and **Intel QuickAssist Technology C3xxx**
-device, kernel 4.5 or greater is needed.
-See instructions for `Installation using kernel.org driver`_ below.
-
-
-Installation using 01.org QAT driver
-------------------------------------
-
-NOTE: There is no driver available for **Intel QuickAssist Technology C62x** and
-**Intel QuickAssist Technology C3xxx** devices on 01.org.
-
-Download the latest QuickAssist Technology Driver from `01.org
-<https://01.org/packet-processing/intel%C2%AE-quickassist-technology-drivers-and-patches>`_
-Consult the *Getting Started Guide* at the same URL for further information.
-
-The steps below assume you are:
-
-* Building on a platform with one ``DH895xCC`` device.
-* Using package ``qatmux.l.2.3.0-34.tgz``.
-* On Fedora21 kernel ``3.17.4-301.fc21.x86_64``.
-
-In the BIOS ensure that SRIOV is enabled and VT-d is disabled.
-
-Uninstall any existing QAT driver, for example by running:
-
-* ``./installer.sh uninstall`` in the directory where originally installed.
-
-* or ``rmmod qat_dh895xcc; rmmod intel_qat``.
-
-Build and install the SRIOV-enabled QAT driver::
-
- mkdir /QAT
- cd /QAT
- # copy qatmux.l.2.3.0-34.tgz to this location
- tar zxof qatmux.l.2.3.0-34.tgz
-
- export ICP_WITHOUT_IOMMU=1
- ./installer.sh install QAT1.6 host
-
-You can use ``cat /proc/icp_dh895xcc_dev0/version`` to confirm the driver is correctly installed.
-You can use ``lspci -d:443`` to confirm the bdf of the 32 VF devices are available per ``DH895xCC`` device.
-
-To complete the installation - follow instructions in `Binding the available VFs to the DPDK UIO driver`_.