-Please note that while using ``iommu=pt`` is compulsory for ``igb_uio driver``, the ``vfio-pci`` driver can actually work with both ``iommu=pt`` and ``iommu=on``.
-
-High Performance of Small Packets on 40G NIC
---------------------------------------------
-
-As there might be firmware fixes for performance enhancement in latest version
-of firmware image, the firmware update might be needed for getting high performance.
-Check with the local Intel's Network Division application engineers for firmware updates.
-The base driver to support firmware version of FVL3E will be integrated in the next
-DPDK release, so currently the validated firmware version is 4.2.6.
-
-Enabling Extended Tag
-~~~~~~~~~~~~~~~~~~~~~
-
-PCI configuration of ``extended_tag`` has big impact on small packet size
-performance of 40G ports. Enabling ``extended_tag`` can help 40G port to
-achieve the best performance, especially for small packet size.
-
-* Disabling/enabling ``extended_tag`` can be done in some BIOS implementations.
-
-* If BIOS does not enable it, and does not support changing it, tools
- (e.g. ``setpci`` on Linux) can be used to enable or disable ``extended_tag``.
-
-* From release 16.04, ``extended_tag`` is enabled by default during port
- initialization, users don't need to care about that anymore.
-
-Use 16 Bytes RX Descriptor Size
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-As i40e PMD supports both 16 and 32 bytes RX descriptor sizes, and 16 bytes size can provide helps to high performance of small packets.
-Configuration of ``CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC`` in config files can be changed to use 16 bytes size RX descriptors.
-
-High Performance and per Packet Latency Tradeoff
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Due to the hardware design, the interrupt signal inside NIC is needed for per
-packet descriptor write-back. The minimum interval of interrupts could be set
-at compile time by ``CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL`` in configuration files.
-Though there is a default configuration, the interval could be tuned by the
-users with that configuration item depends on what the user cares about more,
-performance or per packet latency.