event/dlb: add infos get and configure

[dpdk.git] / doc / guides / nics / bnxt.rst

diff --git a/doc/guides/nics/bnxt.rst b/doc/guides/nics/bnxt.rst
index 553f571..2540ddd 100644 (file)
--- a/doc/guides/nics/bnxt.rst
+++ b/doc/guides/nics/bnxt.rst
@@ -385,7 +385,7 @@ The application enables multiple TX and RX queues when it is started.
 
 .. code-block:: console
 
 
 .. code-block:: console
 

-    testpmd -l 1,3,5 --master-lcore 1 --txq=2 –rxq=2 --nb-cores=2
+    testpmd -l 1,3,5 --main-lcore 1 --txq=2 –rxq=2 --nb-cores=2

 
 **TSS**
 
 
 **TSS**
 


@@ -565,9 +565,6 @@ The BNXT PMD supports a PTP client application to communicate with a PTP master
 clock using DPDK IEEE1588 APIs. Note that the PTP client application needs to
 run on PF and vector mode needs to be disabled.
 
 clock using DPDK IEEE1588 APIs. Note that the PTP client application needs to
 run on PF and vector mode needs to be disabled.
 

-For the PTP time synchronization support, the BNXT PMD must be compiled with
-``CONFIG_RTE_LIBRTE_IEEE1588=y`` (this compilation flag is currently pending).
-

 .. code-block:: console
 
     testpmd> set fwd ieee1588 // enable IEEE 1588 mode
 .. code-block:: console
 
     testpmd> set fwd ieee1588 // enable IEEE 1588 mode


@@ -612,7 +609,7 @@ Basic stats include:
 * oerrors
 
 By default, per-queue stats for 16 queues are supported. For more than 16
 * oerrors
 
 By default, per-queue stats for 16 queues are supported. For more than 16

-queues, BNXT PMD should be compiled with ``CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS``
+queues, BNXT PMD should be compiled with ``RTE_ETHDEV_QUEUE_STAT_CNTRS``

 set to the desired number of queues.
 
 Extended Stats
 set to the desired number of queues.
 
 Extended Stats


@@ -762,6 +759,19 @@ The sample command line with the new ``devargs`` looks like this::
        representor=[0], rep-based-pf=8,rep-is-pf=0,rep-q-r2f=1,rep-fc-r2f=1,\
        rep-q-f2r=0,rep-fc-f2r=1 --log-level="pmd.*",8 -- -i --rxq=3 --txq=3
 
        representor=[0], rep-based-pf=8,rep-is-pf=0,rep-q-r2f=1,rep-fc-r2f=1,\
        rep-q-f2r=0,rep-fc-f2r=1 --log-level="pmd.*",8 -- -i --rxq=3 --txq=3
 

+Number of flows supported
+-------------------------
+The number of flows that can be support can be changed using the devargs
+parameter ``max_num_kflows``. The default number of flows supported is 16K each
+in ingress and egress path.
+
+Selecting EM vs EEM
+-------------------
+Broadcom devices can support filter creation in the onchip memory or the
+external memory. This is referred to as EM or EEM mode respectively.
+The decision for internal/external EM support is based on the ``devargs``
+parameter ``max_num_kflows``.  If this is set by the user, external EM is used.
+Otherwise EM support is enabled with flows created in internal memory.

 
 Application Support
 -------------------
 
 Application Support
 -------------------