net/txgbe: support packet type

[dpdk.git] / doc / guides / nics / bnxt.rst

diff --git a/doc/guides/nics/bnxt.rst b/doc/guides/nics/bnxt.rst
index 74d90ba..33b2f3f 100644 (file)
--- a/doc/guides/nics/bnxt.rst
+++ b/doc/guides/nics/bnxt.rst
@@ -4,7 +4,7 @@
 BNXT Poll Mode Driver
 =====================
 
 BNXT Poll Mode Driver
 =====================
 

-The Broadcom BNXT PMD (**librte_pmd_bnxt**) implements support for adapters
+The Broadcom BNXT PMD (**librte_net_bnxt**) implements support for adapters

 based on Ethernet controllers and SoCs belonging to the Broadcom
 BCM574XX/BCM575XX NetXtreme-E® Family of Ethernet Network Controllers,
 the Broadcom BCM588XX Stingray Family of Smart NIC Adapters, and the Broadcom
 based on Ethernet controllers and SoCs belonging to the Broadcom
 BCM574XX/BCM575XX NetXtreme-E® Family of Ethernet Network Controllers,
 the Broadcom BCM588XX Stingray Family of Smart NIC Adapters, and the Broadcom


@@ -385,7 +385,7 @@ The application enables multiple TX and RX queues when it is started.
 
 .. code-block:: console
 
 
 .. code-block:: console
 

-    testpmd -l 1,3,5 --master-lcore 1 --txq=2 –rxq=2 --nb-cores=2
+    testpmd -l 1,3,5 --main-lcore 1 --txq=2 –rxq=2 --nb-cores=2

 
 **TSS**
 
 
 **TSS**
 


@@ -565,9 +565,6 @@ The BNXT PMD supports a PTP client application to communicate with a PTP master
 clock using DPDK IEEE1588 APIs. Note that the PTP client application needs to
 run on PF and vector mode needs to be disabled.
 
 clock using DPDK IEEE1588 APIs. Note that the PTP client application needs to
 run on PF and vector mode needs to be disabled.
 

-For the PTP time synchronization support, the BNXT PMD must be compiled with
-``CONFIG_RTE_LIBRTE_IEEE1588=y`` (this compilation flag is currently pending).
-

 .. code-block:: console
 
     testpmd> set fwd ieee1588 // enable IEEE 1588 mode
 .. code-block:: console
 
     testpmd> set fwd ieee1588 // enable IEEE 1588 mode


@@ -612,7 +609,7 @@ Basic stats include:
 * oerrors
 
 By default, per-queue stats for 16 queues are supported. For more than 16
 * oerrors
 
 By default, per-queue stats for 16 queues are supported. For more than 16

-queues, BNXT PMD should be compiled with ``CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS``
+queues, BNXT PMD should be compiled with ``RTE_ETHDEV_QUEUE_STAT_CNTRS``

 set to the desired number of queues.
 
 Extended Stats
 set to the desired number of queues.
 
 Extended Stats