net/i40e: remove devarg use-latest-supported-vec

[dpdk.git] / doc / guides / nics / cxgbe.rst

diff --git a/doc/guides/nics/cxgbe.rst b/doc/guides/nics/cxgbe.rst
index 54a4c13..f01cd65 100644 (file)
--- a/doc/guides/nics/cxgbe.rst
+++ b/doc/guides/nics/cxgbe.rst
@@ -5,7 +5,7 @@
 CXGBE Poll Mode Driver
 ======================
 
 CXGBE Poll Mode Driver
 ======================
 

-The CXGBE PMD (**librte_pmd_cxgbe**) provides poll mode driver support
+The CXGBE PMD (**librte_net_cxgbe**) provides poll mode driver support

 for **Chelsio Terminator** 10/25/40/100 Gbps family of adapters. CXGBE PMD
 has support for the latest Linux and FreeBSD operating systems.
 
 for **Chelsio Terminator** 10/25/40/100 Gbps family of adapters. CXGBE PMD
 has support for the latest Linux and FreeBSD operating systems.
 


@@ -36,12 +36,12 @@ Limitations
 -----------
 
 The Chelsio Terminator series of devices provide two/four ports but
 -----------
 
 The Chelsio Terminator series of devices provide two/four ports but

-expose a single PCI bus address, thus, librte_pmd_cxgbe registers
+expose a single PCI bus address, thus, librte_net_cxgbe registers

 itself as a PCI driver that allocates one Ethernet device per detected
 port.
 
 itself as a PCI driver that allocates one Ethernet device per detected
 port.
 

-For this reason, one cannot whitelist/blacklist a single port without
-whitelisting/blacklisting the other ports on the same device.
+For this reason, one cannot allow/block a single port without
+allowing/blocking the other ports on the same device.

 
 .. _t5-nics:
 
 
 .. _t5-nics:
 


@@ -87,35 +87,19 @@ Prerequisites
   :ref:`linux-installation` for Linux and section :ref:`freebsd-installation`
   for FreeBSD.
 
   :ref:`linux-installation` for Linux and section :ref:`freebsd-installation`
   for FreeBSD.
 

-Pre-Installation Configuration
-------------------------------
-
-Config File Options
-~~~~~~~~~~~~~~~~~~~
-
-The following options can be modified in the ``.config`` file. Please note that
-enabling debugging options may affect system performance.
-
-- ``CONFIG_RTE_LIBRTE_CXGBE_PMD`` (default **y**)
-
-  Toggle compilation of librte_pmd_cxgbe driver.
-
-  .. note::
-
-     This controls compilation of both CXGBE and CXGBEVF PMD.

 
 Runtime Options
 
 Runtime Options

-~~~~~~~~~~~~~~~
+---------------

 
 The following ``devargs`` options can be enabled at runtime. They must
 be passed as part of EAL arguments. For example,
 
 .. code-block:: console
 
 
 The following ``devargs`` options can be enabled at runtime. They must
 be passed as part of EAL arguments. For example,
 
 .. code-block:: console
 

-   testpmd -w 02:00.4,keep_ovlan=1 -- -i
+   dpdk-testpmd -a 02:00.4,keep_ovlan=1 -- -i

 
 Common Runtime Options
 
 Common Runtime Options

-^^^^^^^^^^^^^^^^^^^^^^
+~~~~~~~~~~~~~~~~~~~~~~

 
 - ``keep_ovlan`` (default **0**)
 
 
 - ``keep_ovlan`` (default **0**)
 


@@ -133,7 +117,7 @@ Common Runtime Options
   coalesce limit has been reached.
 
 CXGBE VF Only Runtime Options
   coalesce limit has been reached.
 
 CXGBE VF Only Runtime Options

-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 
 - ``force_link_up`` (default **0**)
 
 
 - ``force_link_up`` (default **0**)
 


@@ -142,7 +126,7 @@ CXGBE VF Only Runtime Options
   to send traffic to each other even when the physical link is down.
 
 CXGBE PF Only Runtime Options
   to send traffic to each other even when the physical link is down.
 
 CXGBE PF Only Runtime Options

-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 
 - ``filtermode`` (default **0**)
 
 
 - ``filtermode`` (default **0**)
 


@@ -317,7 +301,7 @@ CXGBE PF Only Runtime Options
 
   .. code-block:: console
 
 
   .. code-block:: console
 

-     testpmd -w 02:00.4,filtermode=0x88 -- -i
+     dpdk-testpmd -a 02:00.4,filtermode=0x88 -- -i

 
 - ``filtermask`` (default **0**)
 
 
 - ``filtermask`` (default **0**)
 


@@ -344,7 +328,7 @@ CXGBE PF Only Runtime Options
 
   .. code-block:: console
 
 
   .. code-block:: console
 

-     testpmd -w 02:00.4,filtermode=0x88,filtermask=0x80 -- -i
+     dpdk-testpmd -a 02:00.4,filtermode=0x88,filtermask=0x80 -- -i

 
 .. _driver-compilation:
 
 
 .. _driver-compilation:
 


@@ -426,7 +410,7 @@ Running testpmd
 ~~~~~~~~~~~~~~~
 
 This section demonstrates how to launch **testpmd** with Chelsio
 ~~~~~~~~~~~~~~~
 
 This section demonstrates how to launch **testpmd** with Chelsio

-devices managed by librte_pmd_cxgbe in Linux operating system.
+devices managed by librte_net_cxgbe in Linux operating system.

 
 #. Load the kernel module:
 
 
 #. Load the kernel module:
 


@@ -676,7 +660,7 @@ Running testpmd
 ~~~~~~~~~~~~~~~
 
 This section demonstrates how to launch **testpmd** with Chelsio
 ~~~~~~~~~~~~~~~
 
 This section demonstrates how to launch **testpmd** with Chelsio

-devices managed by librte_pmd_cxgbe in FreeBSD operating system.
+devices managed by librte_net_cxgbe in FreeBSD operating system.

 
 #. Change to DPDK source directory where the target has been compiled in
    section :ref:`driver-compilation`:
 
 #. Change to DPDK source directory where the target has been compiled in
    section :ref:`driver-compilation`:


@@ -689,7 +673,7 @@ devices managed by librte_pmd_cxgbe in FreeBSD operating system.
 
    .. code-block:: console
 
 
    .. code-block:: console
 

-      cp x86_64-native-freebsd-clang/kmod/contigmem.ko /boot/kernel/
+      cp <build_dir>/kernel/freebsd/contigmem.ko /boot/kernel/

 
 #. Add the following lines to /boot/loader.conf:
 
 
 #. Add the following lines to /boot/loader.conf:
 


@@ -770,13 +754,13 @@ devices managed by librte_pmd_cxgbe in FreeBSD operating system.
 
    .. code-block:: console
 
 
    .. code-block:: console
 

-      kldload ./x86_64-native-freebsd-clang/kmod/nic_uio.ko
+      kldload <build_dir>/kernel/freebsd/nic_uio.ko

 
 #. Start testpmd with basic parameters:
 
    .. code-block:: console
 
 
 #. Start testpmd with basic parameters:
 
    .. code-block:: console
 

-      ./x86_64-native-freebsd-clang/app/testpmd -l 0-3 -n 4 -w 0000:02:00.4 -- -i
+      ./<build_dir>/app/dpdk-testpmd -l 0-3 -n 4 -a 0000:02:00.4 -- -i

 
    Example output:
 
 
    Example output: