event/dlb: add infos get and configure

[dpdk.git] / doc / guides / nics / enic.rst

diff --git a/doc/guides/nics/enic.rst b/doc/guides/nics/enic.rst
index 65e536d..c624487 100644 (file)
--- a/doc/guides/nics/enic.rst
+++ b/doc/guides/nics/enic.rst
@@ -14,19 +14,12 @@ How to obtain ENIC PMD integrated DPDK
 --------------------------------------
 
 ENIC PMD support is integrated into the DPDK suite. dpdk-<version>.tar.gz
 --------------------------------------
 
 ENIC PMD support is integrated into the DPDK suite. dpdk-<version>.tar.gz

-should be downloaded from http://core.dpdk.org/download/
+should be downloaded from https://core.dpdk.org/download/

 
 
 Configuration information
 -------------------------
 
 
 
 Configuration information
 -------------------------
 

-- **DPDK Configuration Parameters**
-
-  The following configuration options are available for the ENIC PMD:
-
-  - **CONFIG_RTE_LIBRTE_ENIC_PMD** (default y): Enables or disables inclusion
-    of the ENIC PMD driver in the DPDK compilation.
-

 - **vNIC Configuration Parameters**
 
   - **Number of Queues**
 - **vNIC Configuration Parameters**
 
   - **Number of Queues**


@@ -459,6 +452,10 @@ PKT_RX_VLAN_STRIPPED mbuf flags would not be set. This mode is enabled with the
     packets and then receive them normally. These require 1400 series VIC adapters
     and latest firmware.
   - RAW items are limited to matching UDP tunnel headers like VXLAN.
     packets and then receive them normally. These require 1400 series VIC adapters
     and latest firmware.
   - RAW items are limited to matching UDP tunnel headers like VXLAN.

+  - For 1400 VICs, all flows using the RSS action on a port use same hash
+    configuration. The RETA is ignored. The queues used in the RSS group must be
+    sequential. There is a performance hit if the number of queues is not a power of 2.
+    Only level 0 (outer header) RSS is allowed.

 
 - **Statistics**
 
 
 - **Statistics**
 


@@ -579,11 +576,6 @@ The value depends on the memory configuration of the application, DPDK and
 PMD.  Typically, the limit has to be raised to higher than 2GB.
 e.g., 2621440
 
 PMD.  Typically, the limit has to be raised to higher than 2GB.
 e.g., 2621440
 

-The compilation of any unused drivers can be disabled using the
-configuration file in config/ directory (e.g., config/common_linux).
-This would help in bringing down the time taken for building the
-libraries and the initialization time of the application.
-

 Additional Reference
 --------------------
 
 Additional Reference
 --------------------