- - Supports ``RTE_FLOW_ACTION_TYPE_SAMPLE`` action only within NIC Rx and E-Switch steering domain.
- - The E-Switch Sample flow must have the eswitch_manager VPORT destination (PF or ECPF) and no additional actions.
- - For ConnectX-5, the ``RTE_FLOW_ACTION_TYPE_SAMPLE`` is typically used as first action in the E-Switch egress flow if with header modify or encapsulation actions.
+ - Supports ``RTE_FLOW_ACTION_TYPE_SAMPLE`` action only within NIC Rx and
+ E-Switch steering domain.
+ - For E-Switch Sampling flow with sample ratio > 1, additional actions are not
+ supported in the sample actions list.
+ - For ConnectX-5, the ``RTE_FLOW_ACTION_TYPE_SAMPLE`` is typically used as
+ first action in the E-Switch egress flow if with header modify or
+ encapsulation actions.
+ - For NIC Rx flow, supports ``MARK``, ``COUNT``, ``QUEUE``, ``RSS`` in the
+ sample actions list.
+ - For E-Switch mirroring flow, supports ``RAW ENCAP``, ``Port ID``,
+ ``VXLAN ENCAP``, ``NVGRE ENCAP`` in the sample actions list.
+
+- Modify Field flow:
+
+ - Supports the 'set' operation only for ``RTE_FLOW_ACTION_TYPE_MODIFY_FIELD`` action.
+ - Modification of an arbitrary place in a packet via the special ``RTE_FLOW_FIELD_START`` Field ID is not supported.
+ - Modification of the 802.1Q Tag, VXLAN Network or GENEVE Network ID's is not supported.
+ - Encapsulation levels are not supported, can modify outermost header fields only.
+ - Offsets must be 32-bits aligned, cannot skip past the boundary of a field.