+ using the instructions from Driver compilation and testing section above.
+
+
+#. Running testpmd
+ (Supply ``--log-level="pmd.net.qede.driver:info`` to view informational messages):
+
+ Refer to the document
+ :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>` to run
+ ``testpmd`` application.
+
+ Example output:
+
+ .. code-block:: console
+
+ testpmd -l 0,4-11 -n 4 -- -i --nb-cores=8 --portmask=0xf --rxd=4096 \
+ --txd=4096 --txfreet=4068 --enable-rx-cksum --rxq=4 --txq=4 \
+ --rss-ip --rss-udp
+
+ [...]
+
+ EAL: PCI device 0000:84:00.0 on NUMA socket 1
+ EAL: probe driver: 1077:1634 rte_qede_pmd
+ EAL: Not managed by a supported kernel driver, skipped
+ EAL: PCI device 0000:84:00.1 on NUMA socket 1
+ EAL: probe driver: 1077:1634 rte_qede_pmd
+ EAL: Not managed by a supported kernel driver, skipped
+ EAL: PCI device 0000:88:00.0 on NUMA socket 1
+ EAL: probe driver: 1077:1656 rte_qede_pmd
+ EAL: PCI memory mapped at 0x7f738b200000
+ EAL: PCI memory mapped at 0x7f738b280000
+ EAL: PCI memory mapped at 0x7f738b300000
+ PMD: Chip details : BB1
+ PMD: Driver version : QEDE PMD 8.7.9.0_1.0.0
+ PMD: Firmware version : 8.7.7.0
+ PMD: Management firmware version : 8.7.8.0
+ PMD: Firmware file : /lib/firmware/qed/qed_init_values_zipped-8.7.7.0.bin
+ [QEDE PMD: (84:00.0:dpdk-port-0)]qede_common_dev_init:macaddr \
+ 00:0e:1e:d2:09:9c
+ [...]
+ [QEDE PMD: (84:00.0:dpdk-port-0)]qede_tx_queue_setup:txq 0 num_desc 4096 \
+ tx_free_thresh 4068 socket 0
+ [QEDE PMD: (84:00.0:dpdk-port-0)]qede_tx_queue_setup:txq 1 num_desc 4096 \
+ tx_free_thresh 4068 socket 0
+ [QEDE PMD: (84:00.0:dpdk-port-0)]qede_tx_queue_setup:txq 2 num_desc 4096 \
+ tx_free_thresh 4068 socket 0
+ [QEDE PMD: (84:00.0:dpdk-port-0)]qede_tx_queue_setup:txq 3 num_desc 4096 \
+ tx_free_thresh 4068 socket 0
+ [QEDE PMD: (84:00.0:dpdk-port-0)]qede_rx_queue_setup:rxq 0 num_desc 4096 \
+ rx_buf_size=2148 socket 0
+ [QEDE PMD: (84:00.0:dpdk-port-0)]qede_rx_queue_setup:rxq 1 num_desc 4096 \
+ rx_buf_size=2148 socket 0
+ [QEDE PMD: (84:00.0:dpdk-port-0)]qede_rx_queue_setup:rxq 2 num_desc 4096 \
+ rx_buf_size=2148 socket 0
+ [QEDE PMD: (84:00.0:dpdk-port-0)]qede_rx_queue_setup:rxq 3 num_desc 4096 \
+ rx_buf_size=2148 socket 0
+ [QEDE PMD: (84:00.0:dpdk-port-0)]qede_dev_start:port 0
+ [QEDE PMD: (84:00.0:dpdk-port-0)]qede_dev_start:link status: down
+ [...]
+ Checking link statuses...
+ Port 0 Link Up - speed 25000 Mbps - full-duplex
+ Port 1 Link Up - speed 25000 Mbps - full-duplex
+ Port 2 Link Up - speed 25000 Mbps - full-duplex
+ Port 3 Link Up - speed 25000 Mbps - full-duplex
+ Done
+ testpmd>