net/pcap: enable infinitely Rx a pcap file

[dpdk.git] / doc / guides / nics / sfc_efx.rst

diff --git a/doc/guides/nics/sfc_efx.rst b/doc/guides/nics/sfc_efx.rst
index 6b6b5e0..5f35bc5 100644 (file)
--- a/doc/guides/nics/sfc_efx.rst
+++ b/doc/guides/nics/sfc_efx.rst
@@ -66,7 +66,7 @@ SFC EFX PMD has support for:
 
 - Allmulticast mode
 
 
 - Allmulticast mode
 

-- TCP segmentation offload (TSO)
+- TCP segmentation offload (TSO) including VXLAN and GENEVE encapsulated

 
 - Multicast MAC filter
 
 
 - Multicast MAC filter
 


@@ -82,6 +82,8 @@ SFC EFX PMD has support for:
 
 - Scattered Rx DMA for packet that are larger that a single Rx descriptor
 
 
 - Scattered Rx DMA for packet that are larger that a single Rx descriptor
 

+- Receive queue interrupts
+

 - Deferred receive and transmit queue start
 
 - Transmit VLAN insertion (if running firmware variant supports it)
 - Deferred receive and transmit queue start
 
 - Transmit VLAN insertion (if running firmware variant supports it)


@@ -96,8 +98,6 @@ Non-supported Features
 
 The features not yet supported include:
 
 
 The features not yet supported include:
 

-- Receive queue interupts
-

 - Priority-based flow control
 
 - Configurable RX CRC stripping (always stripped)
 - Priority-based flow control
 
 - Configurable RX CRC stripping (always stripped)


@@ -201,14 +201,20 @@ Supported actions:
 
 - DROP
 
 
 - DROP
 

+- FLAG (supported only with ef10_essb Rx datapath)
+
+- MARK (supported only with ef10_essb Rx datapath)
+

 Validating flow rules depends on the firmware variant.
 
 Validating flow rules depends on the firmware variant.
 

-Ethernet destinaton individual/group match
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The :ref:`flow_isolated_mode` is supported.
+
+Ethernet destination individual/group match
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 
 Ethernet item supports I/G matching, if only the corresponding bit is set
 
 Ethernet item supports I/G matching, if only the corresponding bit is set

-in the mask of destination address. If destinaton address in the spec is
-multicast, it matches all multicast (and broadcast) packets, oherwise it
+in the mask of destination address. If destination address in the spec is
+multicast, it matches all multicast (and broadcast) packets, otherwise it

 matches unicast packets that are not filtered by other flow rules.
 
 Exceptions to flow rules
 matches unicast packets that are not filtered by other flow rules.
 
 Exceptions to flow rules


@@ -236,6 +242,10 @@ Supported NICs
 
    - Solarflare X2522 Dual Port SFP28 10/25GbE Adapter
 
 
    - Solarflare X2522 Dual Port SFP28 10/25GbE Adapter
 

+   - Solarflare X2541 Single Port QSFP28 10/25G/100G Adapter
+
+   - Solarflare X2542 Dual Port QSFP28 10/25G/100G Adapter
+

 - Solarflare Flareon [Ultra] Server Adapters:
 
    - Solarflare SFN8522 Dual Port SFP+ Server Adapter
 - Solarflare Flareon [Ultra] Server Adapters:
 
    - Solarflare SFN8522 Dual Port SFP+ Server Adapter


@@ -314,7 +324,7 @@ boolean parameters value.
   **efx** chooses libefx-based datapath which supports Rx scatter.
   **ef10** chooses EF10 (SFN7xxx, SFN8xxx, X2xxx) native datapath which is
   more efficient than libefx-based and provides richer packet type
   **efx** chooses libefx-based datapath which supports Rx scatter.
   **ef10** chooses EF10 (SFN7xxx, SFN8xxx, X2xxx) native datapath which is
   more efficient than libefx-based and provides richer packet type

-  classification, but lacks Rx scatter support.
+  classification.

   **ef10_esps** chooses SFNX2xxx equal stride packed stream datapath
   which may be used on DPDK firmware variant only
   (see notes about its limitations above).
   **ef10_esps** chooses SFNX2xxx equal stride packed stream datapath
   which may be used on DPDK firmware variant only
   (see notes about its limitations above).


@@ -329,8 +339,7 @@ boolean parameters value.
   Mbuf segments may come from different mempools, and mbuf reference
   counters are treated responsibly.
   **ef10** chooses EF10 (SFN7xxx, SFN8xxx, X2xxx) native datapath which is
   Mbuf segments may come from different mempools, and mbuf reference
   counters are treated responsibly.
   **ef10** chooses EF10 (SFN7xxx, SFN8xxx, X2xxx) native datapath which is

-  more efficient than libefx-based but has no VLAN insertion and TSO
-  support yet.
+  more efficient than libefx-based but has no VLAN insertion support yet.

   Mbuf segments may come from different mempools, and mbuf reference
   counters are treated responsibly.
   **ef10_simple** chooses EF10 (SFN7xxx, SFN8xxx, X2xxx) native datapath which
   Mbuf segments may come from different mempools, and mbuf reference
   counters are treated responsibly.
   **ef10_simple** chooses EF10 (SFN7xxx, SFN8xxx, X2xxx) native datapath which


@@ -339,10 +348,10 @@ boolean parameters value.
 
 - ``perf_profile`` [auto|throughput|low-latency] (default **throughput**)
 
 
 - ``perf_profile`` [auto|throughput|low-latency] (default **throughput**)
 

-  Choose hardware tunning to be optimized for either throughput or
+  Choose hardware tuning to be optimized for either throughput or

   low-latency.
   **auto** allows NIC firmware to make a choice based on
   low-latency.
   **auto** allows NIC firmware to make a choice based on

-  installed licences and firmware variant configured using **sfboot**.
+  installed licenses and firmware variant configured using **sfboot**.

 
 - ``stats_update_period_ms`` [long] (default **1000**)
 
 
 - ``stats_update_period_ms`` [long] (default **1000**)