event/dlb: add infos get and configure

[dpdk.git] / doc / guides / nics / virtio.rst

diff --git a/doc/guides/nics/virtio.rst b/doc/guides/nics/virtio.rst
index 0daf25b..c03c2d0 100644 (file)
--- a/doc/guides/nics/virtio.rst
+++ b/doc/guides/nics/virtio.rst
@@ -110,7 +110,7 @@ Host2VM communication example
 
     .. code-block:: console
 
 
     .. code-block:: console
 

-        examples/kni/build/app/kni -l 0-3 -n 4 -- -p 0x1 -P --config="(0,1,3)"
+        <build_dir>/examples/dpdk-kni -l 0-3 -n 4 -- -p 0x1 -P --config="(0,1,3)"

 
     This command generates one network device vEth0 for physical port.
     If specify more physical ports, the generated network device will be vEth1, vEth2, and so on.
 
     This command generates one network device vEth0 for physical port.
     If specify more physical ports, the generated network device will be vEth1, vEth2, and so on.


@@ -154,7 +154,7 @@ Host2VM communication example
         modprobe uio
         echo 512 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
         modprobe uio_pci_generic
         modprobe uio
         echo 512 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
         modprobe uio_pci_generic

-        python usertools/dpdk-devbind.py -b uio_pci_generic 00:03.0
+        ./usertools/dpdk-devbind.py -b uio_pci_generic 00:03.0

 
     We use testpmd as the forwarding application in this example.
 
 
     We use testpmd as the forwarding application in this example.
 


@@ -329,7 +329,7 @@ To support Rx interrupts,
 
     .. code-block:: console
 
 
     .. code-block:: console
 

-        python usertools/dpdk-devbind.py -b vfio-pci 00:03.0
+        ./usertools/dpdk-devbind.py -b vfio-pci 00:03.0

 
 Example
 ~~~~~~~
 
 Example
 ~~~~~~~


@@ -340,7 +340,7 @@ Here we use l3fwd-power as an example to show how to get started.
 
     .. code-block:: console
 
 
     .. code-block:: console
 

-        $ l3fwd-power -l 0-1 -- -p 1 -P --config="(0,0,1)" \
+        $ dpdk-l3fwd-power -l 0-1 -- -p 1 -P --config="(0,0,1)" \

                                                --no-numa --parse-ptype
 
 
                                                --no-numa --parse-ptype
 
 


@@ -361,7 +361,7 @@ Below devargs are supported by the PCI virtio driver:
     It is used to specify link speed of virtio device. Link speed is a part of
     link status structure. It could be requested by application using
     rte_eth_link_get_nowait function.
     It is used to specify link speed of virtio device. Link speed is a part of
     link status structure. It could be requested by application using
     rte_eth_link_get_nowait function.

-    (Default: 10000 (10G))
+    (Default: 0xffffffff (Unknown))

 
 #.  ``vectorized``:
 
 
 #.  ``vectorized``:
 


@@ -422,7 +422,7 @@ Below devargs are supported by the virtio-user vdev:
     It is used to specify link speed of virtio device. Link speed is a part of
     link status structure. It could be requested by application using
     rte_eth_link_get_nowait function.
     It is used to specify link speed of virtio device. Link speed is a part of
     link status structure. It could be requested by application using
     rte_eth_link_get_nowait function.

-    (Default: 10000 (10G))
+    (Default: 0xffffffff (Unknown))

 
 #.  ``vectorized``:
 
 
 #.  ``vectorized``: