+Action: ``RAW_ENCAP``
+^^^^^^^^^^^^^^^^^^^^^
+
+Adds outer header whose template is provided in its data buffer,
+as defined in the ``rte_flow_action_raw_encap`` definition.
+
+This action modifies the payload of matched flows. The data supplied must
+be a valid header, either holding layer 2 data in case of adding layer 2 after
+decap layer 3 tunnel (for example MPLSoGRE) or complete tunnel definition
+starting from layer 2 and moving to the tunnel item itself. When applied to
+the original packet the resulting packet must be a valid packet.
+
+.. _table_rte_flow_action_raw_encap:
+
+.. table:: RAW_ENCAP
+
+ +----------------+----------------------------------------+
+ | Field | Value |
+ +================+========================================+
+ | ``data`` | Encapsulation data |
+ +----------------+----------------------------------------+
+ | ``preserve`` | Bit-mask of data to preserve on output |
+ +----------------+----------------------------------------+
+ | ``size`` | Size of data and preserve |
+ +----------------+----------------------------------------+
+
+Action: ``RAW_DECAP``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Remove outer header whose template is provided in its data buffer,
+as defined in the ``rte_flow_action_raw_decap``
+
+This action modifies the payload of matched flows. The data supplied must
+be a valid header, either holding layer 2 data in case of removing layer 2
+before encapsulation of layer 3 tunnel (for example MPLSoGRE) or complete
+tunnel definition starting from layer 2 and moving to the tunnel item itself.
+When applied to the original packet the resulting packet must be a
+valid packet.
+
+.. _table_rte_flow_action_raw_decap:
+
+.. table:: RAW_DECAP
+
+ +----------------+----------------------------------------+
+ | Field | Value |
+ +================+========================================+
+ | ``data`` | Decapsulation data |
+ +----------------+----------------------------------------+
+ | ``size`` | Size of data |
+ +----------------+----------------------------------------+
+
+Action: ``SET_IPV4_SRC``
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Set a new IPv4 source address in the outermost IPv4 header.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_IPV4 flow pattern item.
+Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_ipv4_src:
+
+.. table:: SET_IPV4_SRC
+
+ +-----------------------------------------+
+ | Field | Value |
+ +===============+=========================+
+ | ``ipv4_addr`` | new IPv4 source address |
+ +---------------+-------------------------+
+
+Action: ``SET_IPV4_DST``
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Set a new IPv4 destination address in the outermost IPv4 header.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_IPV4 flow pattern item.
+Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_ipv4_dst:
+
+.. table:: SET_IPV4_DST
+
+ +---------------+------------------------------+
+ | Field | Value |
+ +===============+==============================+
+ | ``ipv4_addr`` | new IPv4 destination address |
+ +---------------+------------------------------+
+
+Action: ``SET_IPV6_SRC``
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Set a new IPv6 source address in the outermost IPv6 header.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_IPV6 flow pattern item.
+Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_ipv6_src:
+
+.. table:: SET_IPV6_SRC
+
+ +---------------+-------------------------+
+ | Field | Value |
+ +===============+=========================+
+ | ``ipv6_addr`` | new IPv6 source address |
+ +---------------+-------------------------+
+
+Action: ``SET_IPV6_DST``
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Set a new IPv6 destination address in the outermost IPv6 header.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_IPV6 flow pattern item.
+Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_ipv6_dst:
+
+.. table:: SET_IPV6_DST
+
+ +---------------+------------------------------+
+ | Field | Value |
+ +===============+==============================+
+ | ``ipv6_addr`` | new IPv6 destination address |
+ +---------------+------------------------------+
+
+Action: ``SET_TP_SRC``
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Set a new source port number in the outermost TCP/UDP header.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_TCP or RTE_FLOW_ITEM_TYPE_UDP
+flow pattern item. Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_tp_src:
+
+.. table:: SET_TP_SRC
+
+ +----------+-------------------------+
+ | Field | Value |
+ +==========+=========================+
+ | ``port`` | new TCP/UDP source port |
+ +---------------+--------------------+
+
+Action: ``SET_TP_DST``
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Set a new destination port number in the outermost TCP/UDP header.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_TCP or RTE_FLOW_ITEM_TYPE_UDP
+flow pattern item. Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_tp_dst:
+
+.. table:: SET_TP_DST
+
+ +----------+------------------------------+
+ | Field | Value |
+ +==========+==============================+
+ | ``port`` | new TCP/UDP destination port |
+ +---------------+-------------------------+
+
+Action: ``MAC_SWAP``
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Swap the source and destination MAC addresses in the outermost Ethernet
+header.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_ETH flow pattern item.
+Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_mac_swap:
+
+.. table:: MAC_SWAP
+
+ +---------------+
+ | Field |
+ +===============+
+ | no properties |
+ +---------------+
+
+Action: ``DEC_TTL``
+^^^^^^^^^^^^^^^^^^^
+
+Decrease TTL value.
+
+If there is no valid RTE_FLOW_ITEM_TYPE_IPV4 or RTE_FLOW_ITEM_TYPE_IPV6
+in pattern, Some PMDs will reject rule because behavior will be undefined.
+
+.. _table_rte_flow_action_dec_ttl:
+
+.. table:: DEC_TTL
+
+ +---------------+
+ | Field |
+ +===============+
+ | no properties |
+ +---------------+
+
+Action: ``SET_TTL``
+^^^^^^^^^^^^^^^^^^^
+
+Assigns a new TTL value.
+
+If there is no valid RTE_FLOW_ITEM_TYPE_IPV4 or RTE_FLOW_ITEM_TYPE_IPV6
+in pattern, Some PMDs will reject rule because behavior will be undefined.
+
+.. _table_rte_flow_action_set_ttl:
+
+.. table:: SET_TTL
+
+ +---------------+--------------------+
+ | Field | Value |
+ +===============+====================+
+ | ``ttl_value`` | new TTL value |
+ +---------------+--------------------+
+
+Action: ``SET_MAC_SRC``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Set source MAC address.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_ETH flow pattern item.
+Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_mac_src:
+
+.. table:: SET_MAC_SRC
+
+ +--------------+---------------+
+ | Field | Value |
+ +==============+===============+
+ | ``mac_addr`` | MAC address |
+ +--------------+---------------+
+
+Action: ``SET_MAC_DST``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Set destination MAC address.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_ETH flow pattern item.
+Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_mac_dst:
+
+.. table:: SET_MAC_DST
+
+ +--------------+---------------+
+ | Field | Value |
+ +==============+===============+
+ | ``mac_addr`` | MAC address |
+ +--------------+---------------+
+
+Action: ``INC_TCP_SEQ``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Increase sequence number in the outermost TCP header.
+Value to increase TCP sequence number by is a big-endian 32 bit integer.
+
+Using this action on non-matching traffic will result in undefined behavior.
+
+Action: ``DEC_TCP_SEQ``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Decrease sequence number in the outermost TCP header.
+Value to decrease TCP sequence number by is a big-endian 32 bit integer.
+
+Using this action on non-matching traffic will result in undefined behavior.
+
+Action: ``INC_TCP_ACK``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Increase acknowledgment number in the outermost TCP header.
+Value to increase TCP acknowledgment number by is a big-endian 32 bit integer.
+
+Using this action on non-matching traffic will result in undefined behavior.
+
+Action: ``DEC_TCP_ACK``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Decrease acknowledgment number in the outermost TCP header.
+Value to decrease TCP acknowledgment number by is a big-endian 32 bit integer.
+
+Using this action on non-matching traffic will result in undefined behavior.
+
git.droids-corp.org / dpdk.git / blobdiff