+ +--------------+---------------------------------------+
+ | Field | Value |
+ +==============+=======================================+
+ | ``original`` | use original DPDK port ID if possible |
+ +--------------+---------------------------------------+
+ | ``id`` | DPDK port ID |
+ +--------------+---------------------------------------+
+
+Action: ``METER``
+^^^^^^^^^^^^^^^^^
+
+Applies a stage of metering and policing.
+
+The metering and policing (MTR) object has to be first created using the
+rte_mtr_create() API function. The ID of the MTR object is specified as
+action parameter. More than one flow can use the same MTR object through
+the meter action. The MTR object can be further updated or queried using
+the rte_mtr* API.
+
+.. _table_rte_flow_action_meter:
+
+.. table:: METER
+
+ +--------------+---------------+
+ | Field | Value |
+ +==============+===============+
+ | ``mtr_id`` | MTR object ID |
+ +--------------+---------------+
+
+Action: ``SECURITY``
+^^^^^^^^^^^^^^^^^^^^
+
+Perform the security action on flows matched by the pattern items
+according to the configuration of the security session.
+
+This action modifies the payload of matched flows. For INLINE_CRYPTO, the
+security protocol headers and IV are fully provided by the application as
+specified in the flow pattern. The payload of matching packets is
+encrypted on egress, and decrypted and authenticated on ingress.
+For INLINE_PROTOCOL, the security protocol is fully offloaded to HW,
+providing full encapsulation and decapsulation of packets in security
+protocols. The flow pattern specifies both the outer security header fields
+and the inner packet fields. The security session specified in the action
+must match the pattern parameters.
+
+The security session specified in the action must be created on the same
+port as the flow action that is being specified.
+
+The ingress/egress flow attribute should match that specified in the
+security session if the security session supports the definition of the
+direction.
+
+Multiple flows can be configured to use the same security session.
+
+.. _table_rte_flow_action_security:
+
+.. table:: SECURITY
+
+ +----------------------+--------------------------------------+
+ | Field | Value |
+ +======================+======================================+
+ | ``security_session`` | security session to apply |
+ +----------------------+--------------------------------------+
+
+The following is an example of configuring IPsec inline using the
+INLINE_CRYPTO security session:
+
+The encryption algorithm, keys and salt are part of the opaque
+``rte_security_session``. The SA is identified according to the IP and ESP
+fields in the pattern items.
+
+.. _table_rte_flow_item_esp_inline_example:
+
+.. table:: IPsec inline crypto flow pattern items.
+
+ +-------+----------+
+ | Index | Item |
+ +=======+==========+
+ | 0 | Ethernet |
+ +-------+----------+
+ | 1 | IPv4 |
+ +-------+----------+
+ | 2 | ESP |
+ +-------+----------+
+ | 3 | END |
+ +-------+----------+
+
+.. _table_rte_flow_action_esp_inline_example:
+
+.. table:: IPsec inline flow actions.
+
+ +-------+----------+
+ | Index | Action |
+ +=======+==========+
+ | 0 | SECURITY |
+ +-------+----------+
+ | 1 | END |
+ +-------+----------+
+
+Action: ``OF_SET_MPLS_TTL``
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Implements ``OFPAT_SET_MPLS_TTL`` ("MPLS TTL") as defined by the `OpenFlow
+Switch Specification`_.
+
+.. _table_rte_flow_action_of_set_mpls_ttl:
+
+.. table:: OF_SET_MPLS_TTL
+
+ +--------------+----------+
+ | Field | Value |
+ +==============+==========+
+ | ``mpls_ttl`` | MPLS TTL |
+ +--------------+----------+
+
+Action: ``OF_DEC_MPLS_TTL``
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Implements ``OFPAT_DEC_MPLS_TTL`` ("decrement MPLS TTL") as defined by the
+`OpenFlow Switch Specification`_.
+
+.. _table_rte_flow_action_of_dec_mpls_ttl:
+
+.. table:: OF_DEC_MPLS_TTL
+
+ +---------------+
+ | Field |
+ +===============+
+ | no properties |
+ +---------------+
+
+Action: ``OF_SET_NW_TTL``
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Implements ``OFPAT_SET_NW_TTL`` ("IP TTL") as defined by the `OpenFlow
+Switch Specification`_.
+
+.. _table_rte_flow_action_of_set_nw_ttl:
+
+.. table:: OF_SET_NW_TTL
+
+ +------------+--------+
+ | Field | Value |
+ +============+========+
+ | ``nw_ttl`` | IP TTL |
+ +------------+--------+
+
+Action: ``OF_DEC_NW_TTL``
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Implements ``OFPAT_DEC_NW_TTL`` ("decrement IP TTL") as defined by the
+`OpenFlow Switch Specification`_.
+
+.. _table_rte_flow_action_of_dec_nw_ttl:
+
+.. table:: OF_DEC_NW_TTL
+
+ +---------------+
+ | Field |
+ +===============+
+ | no properties |
+ +---------------+
+
+Action: ``OF_COPY_TTL_OUT``
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Implements ``OFPAT_COPY_TTL_OUT`` ("copy TTL "outwards" -- from
+next-to-outermost to outermost") as defined by the `OpenFlow Switch
+Specification`_.
+
+.. _table_rte_flow_action_of_copy_ttl_out:
+
+.. table:: OF_COPY_TTL_OUT
+
+ +---------------+
+ | Field |
+ +===============+
+ | no properties |
+ +---------------+
+
+Action: ``OF_COPY_TTL_IN``
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Implements ``OFPAT_COPY_TTL_IN`` ("copy TTL "inwards" -- from outermost to
+next-to-outermost") as defined by the `OpenFlow Switch Specification`_.
+
+.. _table_rte_flow_action_of_copy_ttl_in:
+
+.. table:: OF_COPY_TTL_IN
+
+ +---------------+
+ | Field |
+ +===============+
+ | no properties |
+ +---------------+
+
+Action: ``OF_POP_VLAN``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Implements ``OFPAT_POP_VLAN`` ("pop the outer VLAN tag") as defined
+by the `OpenFlow Switch Specification`_.
+
+.. _table_rte_flow_action_of_pop_vlan:
+
+.. table:: OF_POP_VLAN
+
+ +---------------+
+ | Field |
+ +===============+
+ | no properties |
+ +---------------+
+
+Action: ``OF_PUSH_VLAN``
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Implements ``OFPAT_PUSH_VLAN`` ("push a new VLAN tag") as defined by the
+`OpenFlow Switch Specification`_.
+
+.. _table_rte_flow_action_of_push_vlan:
+
+.. table:: OF_PUSH_VLAN
+
+ +---------------+-----------+
+ | Field | Value |
+ +===============+===========+
+ | ``ethertype`` | EtherType |
+ +---------------+-----------+
+
+Action: ``OF_SET_VLAN_VID``
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Implements ``OFPAT_SET_VLAN_VID`` ("set the 802.1q VLAN id") as defined by
+the `OpenFlow Switch Specification`_.
+
+.. _table_rte_flow_action_of_set_vlan_vid:
+
+.. table:: OF_SET_VLAN_VID
+
+ +--------------+---------+
+ | Field | Value |
+ +==============+=========+
+ | ``vlan_vid`` | VLAN id |
+ +--------------+---------+
+
+Action: ``OF_SET_VLAN_PCP``
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Implements ``OFPAT_SET_LAN_PCP`` ("set the 802.1q priority") as defined by
+the `OpenFlow Switch Specification`_.
+
+.. _table_rte_flow_action_of_set_vlan_pcp:
+
+.. table:: OF_SET_VLAN_PCP
+
+ +--------------+---------------+
+ | Field | Value |
+ +==============+===============+
+ | ``vlan_pcp`` | VLAN priority |
+ +--------------+---------------+
+
+Action: ``OF_POP_MPLS``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Implements ``OFPAT_POP_MPLS`` ("pop the outer MPLS tag") as defined by the
+`OpenFlow Switch Specification`_.
+
+.. _table_rte_flow_action_of_pop_mpls:
+
+.. table:: OF_POP_MPLS
+
+ +---------------+-----------+
+ | Field | Value |
+ +===============+===========+
+ | ``ethertype`` | EtherType |
+ +---------------+-----------+
+
+Action: ``OF_PUSH_MPLS``
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Implements ``OFPAT_PUSH_MPLS`` ("push a new MPLS tag") as defined by the
+`OpenFlow Switch Specification`_.
+
+.. _table_rte_flow_action_of_push_mpls:
+
+.. table:: OF_PUSH_MPLS
+
+ +---------------+-----------+
+ | Field | Value |
+ +===============+===========+
+ | ``ethertype`` | EtherType |
+ +---------------+-----------+
+
+Action: ``VXLAN_ENCAP``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Performs a VXLAN encapsulation action by encapsulating the matched flow in the
+VXLAN tunnel as defined in the``rte_flow_action_vxlan_encap`` flow items
+definition.
+
+This action modifies the payload of matched flows. The flow definition specified
+in the ``rte_flow_action_tunnel_encap`` action structure must define a valid
+VLXAN network overlay which conforms with RFC 7348 (Virtual eXtensible Local
+Area Network (VXLAN): A Framework for Overlaying Virtualized Layer 2 Networks
+over Layer 3 Networks). The pattern must be terminated with the
+RTE_FLOW_ITEM_TYPE_END item type.
+
+.. _table_rte_flow_action_vxlan_encap:
+
+.. table:: VXLAN_ENCAP
+
+ +----------------+-------------------------------------+
+ | Field | Value |
+ +================+=====================================+
+ | ``definition`` | Tunnel end-point overlay definition |
+ +----------------+-------------------------------------+
+
+.. _table_rte_flow_action_vxlan_encap_example:
+
+.. table:: IPv4 VxLAN flow pattern example.
+
+ +-------+----------+
+ | Index | Item |
+ +=======+==========+
+ | 0 | Ethernet |
+ +-------+----------+
+ | 1 | IPv4 |
+ +-------+----------+
+ | 2 | UDP |
+ +-------+----------+
+ | 3 | VXLAN |
+ +-------+----------+
+ | 4 | END |
+ +-------+----------+
+
+Action: ``VXLAN_DECAP``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Performs a decapsulation action by stripping all headers of the VXLAN tunnel
+network overlay from the matched flow.
+
+The flow items pattern defined for the flow rule with which a ``VXLAN_DECAP``
+action is specified, must define a valid VXLAN tunnel as per RFC7348. If the
+flow pattern does not specify a valid VXLAN tunnel then a
+RTE_FLOW_ERROR_TYPE_ACTION error should be returned.
+
+This action modifies the payload of matched flows.
+
+Action: ``NVGRE_ENCAP``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Performs a NVGRE encapsulation action by encapsulating the matched flow in the
+NVGRE tunnel as defined in the``rte_flow_action_tunnel_encap`` flow item
+definition.
+
+This action modifies the payload of matched flows. The flow definition specified
+in the ``rte_flow_action_tunnel_encap`` action structure must defined a valid
+NVGRE network overlay which conforms with RFC 7637 (NVGRE: Network
+Virtualization Using Generic Routing Encapsulation). The pattern must be
+terminated with the RTE_FLOW_ITEM_TYPE_END item type.
+
+.. _table_rte_flow_action_nvgre_encap:
+
+.. table:: NVGRE_ENCAP
+
+ +----------------+-------------------------------------+
+ | Field | Value |
+ +================+=====================================+
+ | ``definition`` | NVGRE end-point overlay definition |
+ +----------------+-------------------------------------+
+
+.. _table_rte_flow_action_nvgre_encap_example:
+
+.. table:: IPv4 NVGRE flow pattern example.
+
+ +-------+----------+
+ | Index | Item |
+ +=======+==========+
+ | 0 | Ethernet |
+ +-------+----------+
+ | 1 | IPv4 |
+ +-------+----------+
+ | 2 | NVGRE |
+ +-------+----------+
+ | 3 | END |
+ +-------+----------+
+
+Action: ``NVGRE_DECAP``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Performs a decapsulation action by stripping all headers of the NVGRE tunnel
+network overlay from the matched flow.
+
+The flow items pattern defined for the flow rule with which a ``NVGRE_DECAP``
+action is specified, must define a valid NVGRE tunnel as per RFC7637. If the
+flow pattern does not specify a valid NVGRE tunnel then a
+RTE_FLOW_ERROR_TYPE_ACTION error should be returned.
+
+This action modifies the payload of matched flows.
+
+Action: ``RAW_ENCAP``
+^^^^^^^^^^^^^^^^^^^^^
+
+Adds outer header whose template is provided in its data buffer,
+as defined in the ``rte_flow_action_raw_encap`` definition.
+
+This action modifies the payload of matched flows. The data supplied must
+be a valid header, either holding layer 2 data in case of adding layer 2 after
+decap layer 3 tunnel (for example MPLSoGRE) or complete tunnel definition
+starting from layer 2 and moving to the tunnel item itself. When applied to
+the original packet the resulting packet must be a valid packet.
+
+.. _table_rte_flow_action_raw_encap:
+
+.. table:: RAW_ENCAP
+
+ +----------------+----------------------------------------+
+ | Field | Value |
+ +================+========================================+
+ | ``data`` | Encapsulation data |
+ +----------------+----------------------------------------+
+ | ``preserve`` | Bit-mask of data to preserve on output |
+ +----------------+----------------------------------------+
+ | ``size`` | Size of data and preserve |
+ +----------------+----------------------------------------+
+
+Action: ``RAW_DECAP``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Remove outer header whose template is provided in its data buffer,
+as defined in the ``rte_flow_action_raw_decap``
+
+This action modifies the payload of matched flows. The data supplied must
+be a valid header, either holding layer 2 data in case of removing layer 2
+before encapsulation of layer 3 tunnel (for example MPLSoGRE) or complete
+tunnel definition starting from layer 2 and moving to the tunnel item itself.
+When applied to the original packet the resulting packet must be a
+valid packet.
+
+.. _table_rte_flow_action_raw_decap:
+
+.. table:: RAW_DECAP
+
+ +----------------+----------------------------------------+
+ | Field | Value |
+ +================+========================================+
+ | ``data`` | Decapsulation data |
+ +----------------+----------------------------------------+
+ | ``size`` | Size of data |
+ +----------------+----------------------------------------+
+
+Action: ``SET_IPV4_SRC``
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Set a new IPv4 source address in the outermost IPv4 header.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_IPV4 flow pattern item.
+Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_ipv4_src:
+
+.. table:: SET_IPV4_SRC
+
+ +-----------------------------------------+
+ | Field | Value |
+ +===============+=========================+
+ | ``ipv4_addr`` | new IPv4 source address |
+ +---------------+-------------------------+
+
+Action: ``SET_IPV4_DST``
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Set a new IPv4 destination address in the outermost IPv4 header.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_IPV4 flow pattern item.
+Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_ipv4_dst:
+
+.. table:: SET_IPV4_DST
+
+ +---------------+------------------------------+
+ | Field | Value |
+ +===============+==============================+
+ | ``ipv4_addr`` | new IPv4 destination address |
+ +---------------+------------------------------+
+
+Action: ``SET_IPV6_SRC``
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Set a new IPv6 source address in the outermost IPv6 header.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_IPV6 flow pattern item.
+Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_ipv6_src:
+
+.. table:: SET_IPV6_SRC
+
+ +---------------+-------------------------+
+ | Field | Value |
+ +===============+=========================+
+ | ``ipv6_addr`` | new IPv6 source address |
+ +---------------+-------------------------+
+
+Action: ``SET_IPV6_DST``
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Set a new IPv6 destination address in the outermost IPv6 header.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_IPV6 flow pattern item.
+Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_ipv6_dst:
+
+.. table:: SET_IPV6_DST
+
+ +---------------+------------------------------+
+ | Field | Value |
+ +===============+==============================+
+ | ``ipv6_addr`` | new IPv6 destination address |
+ +---------------+------------------------------+
+
+Action: ``SET_TP_SRC``
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Set a new source port number in the outermost TCP/UDP header.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_TCP or RTE_FLOW_ITEM_TYPE_UDP
+flow pattern item. Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_tp_src:
+
+.. table:: SET_TP_SRC
+
+ +----------+-------------------------+
+ | Field | Value |
+ +==========+=========================+
+ | ``port`` | new TCP/UDP source port |
+ +---------------+--------------------+
+
+Action: ``SET_TP_DST``
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Set a new destination port number in the outermost TCP/UDP header.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_TCP or RTE_FLOW_ITEM_TYPE_UDP
+flow pattern item. Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_tp_dst:
+
+.. table:: SET_TP_DST
+
+ +----------+------------------------------+
+ | Field | Value |
+ +==========+==============================+
+ | ``port`` | new TCP/UDP destination port |
+ +---------------+-------------------------+
+
+Action: ``MAC_SWAP``
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Swap the source and destination MAC addresses in the outermost Ethernet
+header.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_ETH flow pattern item.
+Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_mac_swap:
+
+.. table:: MAC_SWAP
+
+ +---------------+
+ | Field |
+ +===============+
+ | no properties |
+ +---------------+
+
+Action: ``DEC_TTL``
+^^^^^^^^^^^^^^^^^^^
+
+Decrease TTL value.
+
+If there is no valid RTE_FLOW_ITEM_TYPE_IPV4 or RTE_FLOW_ITEM_TYPE_IPV6
+in pattern, Some PMDs will reject rule because behavior will be undefined.
+
+.. _table_rte_flow_action_dec_ttl:
+
+.. table:: DEC_TTL
+
+ +---------------+
+ | Field |
+ +===============+
+ | no properties |
+ +---------------+
+
+Action: ``SET_TTL``
+^^^^^^^^^^^^^^^^^^^
+
+Assigns a new TTL value.
+
+If there is no valid RTE_FLOW_ITEM_TYPE_IPV4 or RTE_FLOW_ITEM_TYPE_IPV6
+in pattern, Some PMDs will reject rule because behavior will be undefined.
+
+.. _table_rte_flow_action_set_ttl:
+
+.. table:: SET_TTL
+
+ +---------------+--------------------+
+ | Field | Value |
+ +===============+====================+
+ | ``ttl_value`` | new TTL value |
+ +---------------+--------------------+
+
+Action: ``SET_MAC_SRC``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Set source MAC address.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_ETH flow pattern item.
+Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_mac_src:
+
+.. table:: SET_MAC_SRC
+
+ +--------------+---------------+
+ | Field | Value |
+ +==============+===============+
+ | ``mac_addr`` | MAC address |
+ +--------------+---------------+
+
+Action: ``SET_MAC_DST``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Set destination MAC address.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_ETH flow pattern item.
+Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_mac_dst:
+
+.. table:: SET_MAC_DST
+
+ +--------------+---------------+
+ | Field | Value |
+ +==============+===============+
+ | ``mac_addr`` | MAC address |
+ +--------------+---------------+
+
+Action: ``INC_TCP_SEQ``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Increase sequence number in the outermost TCP header.
+Value to increase TCP sequence number by is a big-endian 32 bit integer.
+
+Using this action on non-matching traffic will result in undefined behavior.
+
+Action: ``DEC_TCP_SEQ``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Decrease sequence number in the outermost TCP header.
+Value to decrease TCP sequence number by is a big-endian 32 bit integer.
+
+Using this action on non-matching traffic will result in undefined behavior.
+
+Action: ``INC_TCP_ACK``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Increase acknowledgment number in the outermost TCP header.
+Value to increase TCP acknowledgment number by is a big-endian 32 bit integer.
+
+Using this action on non-matching traffic will result in undefined behavior.
+
+Action: ``DEC_TCP_ACK``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Decrease acknowledgment number in the outermost TCP header.
+Value to decrease TCP acknowledgment number by is a big-endian 32 bit integer.
+
+Using this action on non-matching traffic will result in undefined behavior.
+
+Action: ``SET_TAG``
+^^^^^^^^^^^^^^^^^^^
+
+Set Tag.
+
+Tag is a transient data used during flow matching. This is not delivered to
+application. Multiple tags are supported by specifying index.
+
+.. _table_rte_flow_action_set_tag:
+
+.. table:: SET_TAG
+
+ +-----------+----------------------------+
+ | Field | Value |
+ +===========+============================+
+ | ``data`` | 32 bit tag value |
+ +-----------+----------------------------+
+ | ``mask`` | bit-mask applies to "data" |
+ +-----------+----------------------------+
+ | ``index`` | index of tag to set |
+ +-----------+----------------------------+
+
+Action: ``SET_META``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Set metadata. Item ``META`` matches metadata.
+
+Metadata set by mbuf metadata field with PKT_TX_DYNF_METADATA flag on egress
+will be overridden by this action. On ingress, the metadata will be carried by
+``metadata`` dynamic field of ``rte_mbuf`` which can be accessed by
+``RTE_FLOW_DYNF_METADATA()``. PKT_RX_DYNF_METADATA flag will be set along
+with the data.
+
+The mbuf dynamic field must be registered by calling
+``rte_flow_dynf_metadata_register()`` prior to use ``SET_META`` action.
+
+Altering partial bits is supported with ``mask``. For bits which have never been
+set, unpredictable value will be seen depending on driver implementation. For
+loopback/hairpin packet, metadata set on Rx/Tx may or may not be propagated to
+the other path depending on HW capability.
+
+.. _table_rte_flow_action_set_meta:
+
+.. table:: SET_META
+
+ +----------+----------------------------+
+ | Field | Value |
+ +==========+============================+
+ | ``data`` | 32 bit metadata value |
+ +----------+----------------------------+
+ | ``mask`` | bit-mask applies to "data" |
+ +----------+----------------------------+
+
+Action: ``SET_IPV4_DSCP``
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Set IPv4 DSCP.
+
+Modify DSCP in IPv4 header.
+
+It must be used with RTE_FLOW_ITEM_TYPE_IPV4 in pattern.
+Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_ipv4_dscp:
+
+.. table:: SET_IPV4_DSCP
+
+ +-----------+---------------------------------+
+ | Field | Value |
+ +===========+=================================+
+ | ``dscp`` | DSCP in low 6 bits, rest ignore |
+ +-----------+---------------------------------+
+
+Action: ``SET_IPV6_DSCP``
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Set IPv6 DSCP.
+
+Modify DSCP in IPv6 header.
+
+It must be used with RTE_FLOW_ITEM_TYPE_IPV6 in pattern.
+Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_ipv6_dscp:
+
+.. table:: SET_IPV6_DSCP
+
+ +-----------+---------------------------------+
+ | Field | Value |
+ +===========+=================================+
+ | ``dscp`` | DSCP in low 6 bits, rest ignore |
+ +-----------+---------------------------------+
+
+Action: ``AGE``
+^^^^^^^^^^^^^^^
+
+Set ageing timeout configuration to a flow.
+
+Event RTE_ETH_EVENT_FLOW_AGED will be reported if
+timeout passed without any matching on the flow.
+
+.. _table_rte_flow_action_age:
+
+.. table:: AGE
+
+ +--------------+---------------------------------+
+ | Field | Value |
+ +==============+=================================+
+ | ``timeout`` | 24 bits timeout value |
+ +--------------+---------------------------------+
+ | ``reserved`` | 8 bits reserved, must be zero |
+ +--------------+---------------------------------+
+ | ``context`` | user input flow context |
+ +--------------+---------------------------------+
+
+Negative types
+~~~~~~~~~~~~~~
+
+All specified pattern items (``enum rte_flow_item_type``) and actions
+(``enum rte_flow_action_type``) use positive identifiers.
+
+The negative space is reserved for dynamic types generated by PMDs during
+run-time. PMDs may encounter them as a result but must not accept negative
+identifiers they are not aware of.
+
+A method to generate them remains to be defined.
+
+Planned types
+~~~~~~~~~~~~~
+
+Pattern item types will be added as new protocols are implemented.
+
+Variable headers support through dedicated pattern items, for example in
+order to match specific IPv4 options and IPv6 extension headers would be
+stacked after IPv4/IPv6 items.
+
+Other action types are planned but are not defined yet. These include the
+ability to alter packet data in several ways, such as performing
+encapsulation/decapsulation of tunnel headers.
+
+Rules management
+----------------
+
+A rather simple API with few functions is provided to fully manage flow
+rules.
+
+Each created flow rule is associated with an opaque, PMD-specific handle