+ The legacy API will be removed in DPDK 20.11.
+
+* ethdev: The flow director API, including ``rte_eth_conf.fdir_conf`` field,
+ and the related structures (``rte_fdir_*`` and ``rte_eth_fdir_*``),
+ will be removed in DPDK 20.11.
+
+* ethdev: The legacy L2 tunnel filtering API is deprecated as the rest of
+ the legacy filtering API.
+ The functions ``rte_eth_dev_l2_tunnel_eth_type_conf`` and
+ ``rte_eth_dev_l2_tunnel_offload_set`` which were not marked as deprecated,
+ will be removed in DPDK 20.11.
+
+* ethdev: Update API functions returning ``void`` to return ``int`` with
+ negative errno values to indicate various error conditions (e.g.
+ invalid port ID, unsupported operation, failed operation):
+
+ - ``rte_eth_dev_stop``
+ - ``rte_eth_dev_close``
+
+* ethdev: The temporary flag RTE_ETH_DEV_CLOSE_REMOVE will be removed in 20.11.
+ As a consequence, the new behaviour introduced in 18.11 will be effective
+ for all drivers: generic port resources are freed on close operation.
+ Private resources are expected to be released in the ``dev_close`` callback.
+ More details in http://inbox.dpdk.org/dev/5248162.j6AOsuQRmx@thomas/
+
+* ethdev: New offload flags ``DEV_RX_OFFLOAD_FLOW_MARK`` will be added in 19.11.
+ This will allow application to enable or disable PMDs from updating
+ ``rte_mbuf::hash::fdir``.
+ This scheme will allow PMDs to avoid writes to ``rte_mbuf`` fields on Rx and
+ thereby improve Rx performance if application wishes do so.
+ In 19.11 PMDs will still update the field even when the offload is not
+ enabled.
+
+* ethdev: Add new fields to ``rte_eth_rxconf`` to configure the receiving
+ queues to split ingress packets into multiple segments according to the
+ specified lengths into the buffers allocated from the specified
+ memory pools. The backward compatibility to existing API is preserved.
+
+* ethdev: ``rx_descriptor_done`` dev_ops and ``rte_eth_rx_descriptor_done``
+ will be deprecated in 20.11 and will be removed in 21.11.
+ Existing ``rte_eth_rx_descriptor_status`` and ``rte_eth_tx_descriptor_status``
+ APIs can be used as replacement.
+
+* ethdev: The port mirroring API can be replaced with a more fine grain flow API.
+ The structs ``rte_eth_mirror_conf``, ``rte_eth_vlan_mirror`` and the functions
+ ``rte_eth_mirror_rule_set``, ``rte_eth_mirror_rule_reset`` will be marked
+ as deprecated in DPDK 20.11, along with the associated macros ``ETH_MIRROR_*``.
+ This API will be fully removed in DPDK 21.11.
+
+* ethdev: The ``struct rte_flow_item_eth`` and ``struct rte_flow_item_vlan``
+ structs will be modified, to include an additional value, indicating existence
+ or absence of a VLAN header following the current header, as proposed in RFC
+ https://mails.dpdk.org/archives/dev/2020-August/177536.html.
+
+* ethdev: The ``struct rte_flow_item_ipv6`` struct will be modified to include
+ additional values, indicating existence or absence of IPv6 extension headers
+ following the IPv6 header, as proposed in RFC
+ https://mails.dpdk.org/archives/dev/2020-August/177257.html.
+
+* ethdev: Some internal APIs for driver usage are exported in the .map file.
+ Now DPDK has ``__rte_internal`` marker so we can mark internal APIs and move
+ them to the INTERNAL block in .map. Although these APIs are internal it will
+ break the ABI checks, that is why change is planned for 20.11.
+ The list of internal APIs are mainly ones listed in ``rte_ethdev_driver.h``.
+
+* traffic manager: All traffic manager API's in ``rte_tm.h`` were mistakenly made
+ ABI stable in the v19.11 release. The TM maintainer and other contributors have
+ agreed to keep the TM APIs as experimental in expectation of additional spec
+ improvements. Therefore, all APIs in ``rte_tm.h`` will be marked back as
+ experimental in v20.11 DPDK release. For more details, please see `the thread
+ <https://mails.dpdk.org/archives/dev/2020-April/164970.html>`_.
+
+* pmd_dpaa: The API ``rte_pmd_dpaa_set_tx_loopback`` will have extended
+ ``port_id`` definition from ``uint8_t`` to ``uint16_t``.
+
+* security: The API ``rte_security_session_create`` takes only single mempool
+ for session and session private data. So the application need to create
+ mempool for twice the number of sessions needed and will also lead to
+ wastage of memory as session private data need more memory compared to session.
+ Hence the API will be modified to take two mempool pointers - one for session
+ and one for private data.
+
+* cryptodev: ``RTE_CRYPTO_AEAD_LIST_END`` from ``enum rte_crypto_aead_algorithm``,
+ ``RTE_CRYPTO_CIPHER_LIST_END`` from ``enum rte_crypto_cipher_algorithm`` and
+ ``RTE_CRYPTO_AUTH_LIST_END`` from ``enum rte_crypto_auth_algorithm``
+ will be removed.
+
+* cryptodev: support for using IV with all sizes is added, J0 still can
+ be used but only when IV length in following structs ``rte_crypto_auth_xform``,
+ ``rte_crypto_aead_xform`` is set to zero. When IV length is greater or equal
+ to one it means it represents IV, when is set to zero it means J0 is used
+ directly, in this case 16 bytes of J0 need to be passed.
+
+* eventdev: Following structures will be modified to support DLB PMD
+ and future extensions:
+
+ - ``rte_event_dev_info``
+ - ``rte_event_dev_config``
+ - ``rte_event_port_conf``
+
+ Patches containing justification, documentation, and proposed modifications
+ can be found at:
+
+ - https://patches.dpdk.org/patch/71457/
+ - https://patches.dpdk.org/patch/71456/
+
+* rawdev: The rawdev APIs which take a device-specific structure as
+ parameter directly, or indirectly via a "private" pointer inside another
+ structure, will be modified to take an additional parameter of the
+ structure size. The affected APIs will include ``rte_rawdev_info_get``,
+ ``rte_rawdev_configure``, ``rte_rawdev_queue_conf_get`` and
+ ``rte_rawdev_queue_setup``.
+
+* acl: ``RTE_ACL_CLASSIFY_NUM`` enum value will be removed.
+ This enum value is not used inside DPDK, while it prevents to add new
+ classify algorithms without causing an ABI breakage.
+
+* sched: To allow more traffic classes, flexible mapping of pipe queues to
+ traffic classes, and subport level configuration of pipes and queues
+ changes will be made to macros, data structures and API functions defined
+ in "rte_sched.h". These changes are aligned to improvements suggested in the
+ RFC https://mails.dpdk.org/archives/dev/2018-November/120035.html.
+
+* metrics: The function ``rte_metrics_init`` will have a non-void return
+ in order to notify errors instead of calling ``rte_exit``.
+
+* power: ``rte_power_set_env`` function will no longer return 0 on attempt
+ to set new power environment if power environment was already initialized.
+ In this case the function will return -1 unless the environment is unset first
+ (using ``rte_power_unset_env``). Other function usage scenarios will not change.
+
+* python: Since the beginning of 2020, Python 2 has officially reached
+ end-of-support: https://www.python.org/doc/sunset-python-2/.
+ Python 2 support will be completely removed in 20.11.
+ In 20.08, explicit deprecation warnings will be displayed when running
+ scripts with Python 2.
+
+* dpdk-setup.sh: This old script relies on deprecated stuff, and especially
+ ``make``. Given environments are too much variables for such a simple script,
+ it will be removed in DPDK 20.11.
+ Some useful parts may be converted into specific scripts.