mlx5: support flow director

[dpdk.git] / doc / guides / rel_notes / release_16_04.rst

diff --git a/doc/guides/rel_notes/release_16_04.rst b/doc/guides/rel_notes/release_16_04.rst
index 6ecfd3f..6fce4a7 100644 (file)
--- a/doc/guides/rel_notes/release_16_04.rst
+++ b/doc/guides/rel_notes/release_16_04.rst
@@ -64,6 +64,17 @@ This section should contain new features added in this release. Sample format:
 
 * **Added vhost-user live migration support.**
 
 
 * **Added vhost-user live migration support.**
 

+* **Added multicast promiscuous mode support on VF for ixgbe.**
+
+  Added multicast promiscuous mode support on ixgbe VF driver. So all the VFs
+  can receive the multicast packets.
+
+  Please note if we want to use this promiscuous mode, we need both PF and VF
+  driver to support it. The reason is this VF feature is configured on PF.
+  If use kernel PF driver + dpdk VF driver, make sure kernel PF driver support
+  VF multicast promiscuous mode. If use dpdk PF + dpdk VF, better make sure PF
+  driver is the same version as VF.
+

 * **Added support for E-tag on X550.**
 
   E-tag is defined in 802.1br. Please reference
 * **Added support for E-tag on X550.**
 
   E-tag is defined in 802.1br. Please reference


@@ -95,14 +106,75 @@ This section should contain new features added in this release. Sample format:
     default VxLAN port number is 4789 but this can be updated
     programmatically.
 
     default VxLAN port number is 4789 but this can be updated
     programmatically.
 

+* **Added new X550EM_a devices.**
+
+  Added new X550EM_a devices and their mac types, X550EM_a and X550EM_a_vf.
+  Updated the code to use the new devices and mac types.
+
+* **Added x550em_x V2 device support.**
+
+  Only x550em_x V1 was supported before. Now V2 is supported.
+  A mask for V1 and V2 is defined and used to support both.
+
+* **Supported link speed auto-negotiation on X550EM_X**
+
+  Normally the auto-negotiation is supported by FW. SW need not care about
+  that. But on x550em_x, FW doesn't support auto-neg. As the ports of x550em_x
+  are 10G, if we connect the port with a peer which is 1G, the link will always
+  be down.
+  We added the support of auto-neg by SW to avoid this link down issue.
+
+* **Added sw-firmware sync on X550EM_a.**
+
+  Added support for sw-firmware sync for resource sharing.
+  Use the PHY token, shared between sw-fw for PHY access on X550EM_a.
+
+* **Updated the i40e base driver.**
+
+  The i40e base driver was updated with changes including the
+  following:
+
+  * Use Rx control AQ commands to read/write Rx control registers.
+  * Add new X722 device IDs, and removed X710 one was never used.
+  * Expose registers for HASH/FD input set configuring.
+

 * **Enabled PCI extended tag for i40e.**
 
   It enabled extended tag by checking and writing corresponding PCI config
   space bytes, to boost the performance. In the meanwhile, it deprecated the
   legacy way via reading/writing sysfile supported by kernel module igb_uio.
 
 * **Enabled PCI extended tag for i40e.**
 
   It enabled extended tag by checking and writing corresponding PCI config
   space bytes, to boost the performance. In the meanwhile, it deprecated the
   legacy way via reading/writing sysfile supported by kernel module igb_uio.
 

+* **Added i40e support for setting mac addresses.**
+
+* **Added dump of i40e registers and EEPROM.**
+

 * **Supported ether type setting of single and double VLAN for i40e**
 
 * **Supported ether type setting of single and double VLAN for i40e**
 

+* **Added VMDQ DCB mode in i40e.**
+
+  Added support for DCB in VMDQ mode to i40e driver.
+
+* **Added i40e VEB switching support.**
+
+* **Added fm10k Rx interrupt support.**
+
+* **Optimized fm10k Tx.**
+
+  * Free multiple mbufs at a time to reduce freeing mbuf cycles.
+
+* **Handled error flags in fm10k vector Rx.**
+
+  Parse err flags in Rx desc and set error bits in mbuf with vector instructions.
+
+* **Added fm10k FTAG based forwarding support.**
+
+* **Added mlx5 flow director support.**
+
+  Added flow director support (RTE_FDIR_MODE_PERFECT and
+  RTE_FDIR_MODE_PERFECT_MAC_VLAN).
+
+  Only available with Mellanox OFED >= 3.2.
+

 * **Increased number of next hops for LPM IPv4 to 2^24.**
 
   The next_hop field is extended from 8 bits to 24 bits for IPv4.
 * **Increased number of next hops for LPM IPv4 to 2^24.**
 
   The next_hop field is extended from 8 bits to 24 bits for IPv4.


@@ -156,6 +228,46 @@ Drivers
   Fixed issue in ethdev library that the structure for setting
   fdir's mask and flow entry was not consistent in byte ordering.
 
   Fixed issue in ethdev library that the structure for setting
   fdir's mask and flow entry was not consistent in byte ordering.
 

+* **cxgbe: Fixed crash due to incorrect size allocated for RSS table.**
+
+  Fixed a segfault that occurs when accessing part of port 0's RSS
+  table that gets overwritten by subsequent port 1's part of the RSS
+  table due to incorrect size allocated for each entry in the table.
+
+* **cxgbe: Fixed setting wrong device MTU.**
+
+  Fixed an incorrect device MTU being set due to ethernet header and
+  CRC lengths being added twice.
+
+* **ixgbe: Fixed zeroed VF mac address.**
+
+  Resolved an issue where VF mac address is zeroed out in cases where the VF
+  driver is loaded while the PF interface is down.
+  The solution is to only set it when we get an ACK from the PF.
+
+* **ixgbe: Fixed setting flow director flag twice.**
+
+  Resolved an issue where packets were being dropped when switching to perfect
+  filters mode.
+
+* **ixgbe: Set MDIO speed after MAC reset.**
+
+  The MDIO clock speed must be reconfigured after the MAC reset. The MDIO clock
+  speed becomes invalid, therefore the driver reads invalid PHY register values.
+  The driver now set the MDIO clock speed prior to initializing PHY ops and
+  again after the MAC reset.
+
+* **i40e: Generated MAC address for each VFs.**
+
+  It generates a MAC address for each VFs during PF host initialization,
+  and keeps the VF MAC address the same among different VF launch.
+
+* **i40e: Fixed failure of reading/writing Rx control registers.**
+
+  Fixed i40e issue of failing to read/write rx control registers when
+  under stress with traffic, which might result in application launch
+  failure.
+

 * **aesni_mb: Fixed wrong return value when creating a device.**
 
   cryptodev_aesni_mb_init() was returning the device id of the device created,
 * **aesni_mb: Fixed wrong return value when creating a device.**
 
   cryptodev_aesni_mb_init() was returning the device id of the device created,


@@ -181,6 +293,12 @@ Libraries
 Examples
 ~~~~~~~~
 
 Examples
 ~~~~~~~~
 

+* **l3fwd-power: Fixed memory leak for non-IP packet.**
+
+  Fixed issue in l3fwd-power where, on receiving packets of types
+  other than IPv4 or IPv6, the mbuf was not released, and caused
+  a memory leak.
+

 * **examples/vhost: Fixed frequent mbuf allocation failure.**
 
   vhost-switch often fails to allocate mbuf when dequeue from vring because it
 * **examples/vhost: Fixed frequent mbuf allocation failure.**
 
   vhost-switch often fails to allocate mbuf when dequeue from vring because it