app/testpmd: fix CRC strip command

[dpdk.git] / doc / guides / testpmd_app_ug / testpmd_funcs.rst

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 0d31538..1da60fa 100644 (file)
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -198,9 +198,7 @@ For example:
    Maximum number of MAC addresses: 64
    Maximum number of MAC addresses of hash filtering: 0
    VLAN offload:
    Maximum number of MAC addresses: 64
    Maximum number of MAC addresses of hash filtering: 0
    VLAN offload:

-       strip on
-       filter on
-       qinq(extend) off
+       strip on, filter on, extend off, qinq strip off

    Redirection table size: 512
    Supported flow types:
      ipv4-frag
    Redirection table size: 512
    Supported flow types:
      ipv4-frag


@@ -467,6 +465,13 @@ Show Tx metadata value set for a specific port::
 
    testpmd> show port (port_id) tx_metadata
 
 
    testpmd> show port (port_id) tx_metadata
 

+show port supported ptypes
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Show ptypes supported for a specific port::
+
+   testpmd> show port (port_id) ptypes
+

 show device info
 ~~~~~~~~~~~~~~~~
 
 show device info
 ~~~~~~~~~~~~~~~~
 


@@ -799,13 +804,6 @@ Set broadcast mode for a VF from the PF::
 
    testpmd> set vf broadcast (port_id) (vf_id) (on|off)
 
 
    testpmd> set vf broadcast (port_id) (vf_id) (on|off)
 

-vlan set strip
-~~~~~~~~~~~~~~
-
-Set the VLAN strip on a port::
-
-   testpmd> vlan set strip (on|off) (port_id)
-

 vlan set stripq
 ~~~~~~~~~~~~~~~
 
 vlan set stripq
 ~~~~~~~~~~~~~~~
 


@@ -841,19 +839,11 @@ Set VLAN antispoof for a VF from the PF::
 
    testpmd> set vf vlan antispoof (port_id) (vf_id) (on|off)
 
 
    testpmd> set vf vlan antispoof (port_id) (vf_id) (on|off)
 

-vlan set filter
-~~~~~~~~~~~~~~~
-
-Set the VLAN filter on a port::
-
-   testpmd> vlan set filter (on|off) (port_id)
-
-vlan set qinq
-~~~~~~~~~~~~~
-
-Set the VLAN QinQ (extended queue in queue) on for a port::
+vlan set (strip|filter|qinq_strip|extend)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Set the VLAN strip/filter/QinQ strip/extend on for a port::

 
 

-   testpmd> vlan set qinq (on|off) (port_id)
+   testpmd> vlan set (strip|filter|qinq_strip|extend) (on|off) (port_id)

 
 vlan set tpid
 ~~~~~~~~~~~~~
 
 vlan set tpid
 ~~~~~~~~~~~~~


@@ -1663,7 +1653,7 @@ Enable or disable a per port Rx offloading on all Rx queues of a port::
                   vlan_strip, ipv4_cksum, udp_cksum, tcp_cksum, tcp_lro,
                   qinq_strip, outer_ipv4_cksum, macsec_strip,
                   header_split, vlan_filter, vlan_extend, jumbo_frame,
                   vlan_strip, ipv4_cksum, udp_cksum, tcp_cksum, tcp_lro,
                   qinq_strip, outer_ipv4_cksum, macsec_strip,
                   header_split, vlan_filter, vlan_extend, jumbo_frame,

-                  crc_strip, scatter, timestamp, security, keep_crc
+                  scatter, timestamp, security, keep_crc

 
 This command should be run when the port is stopped, or else it will fail.
 
 
 This command should be run when the port is stopped, or else it will fail.
 


@@ -1678,7 +1668,7 @@ Enable or disable a per queue Rx offloading only on a specific Rx queue::
                   vlan_strip, ipv4_cksum, udp_cksum, tcp_cksum, tcp_lro,
                   qinq_strip, outer_ipv4_cksum, macsec_strip,
                   header_split, vlan_filter, vlan_extend, jumbo_frame,
                   vlan_strip, ipv4_cksum, udp_cksum, tcp_cksum, tcp_lro,
                   qinq_strip, outer_ipv4_cksum, macsec_strip,
                   header_split, vlan_filter, vlan_extend, jumbo_frame,

-                  crc_strip, scatter, timestamp, security, keep_crc
+                  scatter, timestamp, security, keep_crc

 
 This command should be run when the port is stopped, or else it will fail.
 
 
 This command should be run when the port is stopped, or else it will fail.
 


@@ -3403,7 +3393,7 @@ set_hash_global_config
 
 Set the global configurations of hash filters::
 
 
 Set the global configurations of hash filters::
 

-   set_hash_global_config (port_id) (toeplitz|simple_xor|default) \
+   set_hash_global_config (port_id) (toeplitz|simple_xor|symmetric_toeplitz|default) \

    (ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|ipv6|ipv6-frag| \
    ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|l2_payload|<flow_id>) \
    (enable|disable)
    (ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|ipv6|ipv6-frag| \
    ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|l2_payload|<flow_id>) \
    (enable|disable)


@@ -3892,6 +3882,14 @@ This section lists supported pattern items and their attributes, if any.
   - ``pdu_type {unsigned}``: PDU type.
   - ``qfi {unsigned}``: QoS flow identifier.
 
   - ``pdu_type {unsigned}``: PDU type.
   - ``qfi {unsigned}``: QoS flow identifier.
 

+- ``pppoes``, ``pppoed``: match PPPoE header.
+
+  - ``session_id {unsigned}``: session identifier.
+
+- ``pppoe_proto_id``: match PPPoE session protocol identifier.
+
+  - ``proto_id {unsigned}``: PPP protocol identifier.
+

 Actions list
 ^^^^^^^^^^^^
 
 Actions list
 ^^^^^^^^^^^^
 


@@ -4373,7 +4371,7 @@ Sample QinQ flow rules
 Before creating QinQ rule(s) the following commands should be issued to enable QinQ::
 
    testpmd> port stop 0
 Before creating QinQ rule(s) the following commands should be issued to enable QinQ::
 
    testpmd> port stop 0

-   testpmd> vlan set qinq on 0
+   testpmd> vlan set qinq_strip on 0

 
 The above command sets the inner and outer TPID's to 0x8100.
 
 
 The above command sets the inner and outer TPID's to 0x8100.