net/axgbe: support 1/2.5Gbps

[dpdk.git] / doc / guides / testpmd_app_ug / testpmd_funcs.rst

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 6779822..fbb3c5a 100644 (file)
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -487,6 +487,21 @@ set packet types classification for a specific port::
 
    testpmd> set port (port_id) ptypes_mask (mask)
 
 
    testpmd> set port (port_id) ptypes_mask (mask)
 

+show port mac addresses info
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Show mac addresses added for a specific port::
+
+   testpmd> show port (port_id) macs
+
+
+show port multicast mac addresses info
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Show multicast mac addresses added for a specific port::
+
+   testpmd> show port (port_id) mcast_macs
+

 show device info
 ~~~~~~~~~~~~~~~~
 
 show device info
 ~~~~~~~~~~~~~~~~
 


@@ -1718,8 +1733,7 @@ Enable or disable a per port Tx offloading on all Tx queues of a port::
                   sctp_cksum, tcp_tso, udp_tso, outer_ipv4_cksum,
                   qinq_insert, vxlan_tnl_tso, gre_tnl_tso,
                   ipip_tnl_tso, geneve_tnl_tso, macsec_insert,
                   sctp_cksum, tcp_tso, udp_tso, outer_ipv4_cksum,
                   qinq_insert, vxlan_tnl_tso, gre_tnl_tso,
                   ipip_tnl_tso, geneve_tnl_tso, macsec_insert,

-                  mt_lockfree, multi_segs, mbuf_fast_free, security,
-                  match_metadata
+                  mt_lockfree, multi_segs, mbuf_fast_free, security

 
 This command should be run when the port is stopped, or else it will fail.
 
 
 This command should be run when the port is stopped, or else it will fail.
 


@@ -2303,6 +2317,16 @@ testpmd will add this value to any Tx packet sent from this port::
 
    testpmd> port config (port_id) tx_metadata (value)
 
 
    testpmd> port config (port_id) tx_metadata (value)
 

+port config dynf
+~~~~~~~~~~~~~~~~
+
+Set/clear dynamic flag per port.
+testpmd will register this flag in the mbuf (same registration
+for both Tx and Rx). Then set/clear this flag for each Tx
+packet sent from this port. The set bit only works for Tx packet::
+
+   testpmd> port config (port_id) dynf (name) (set|clear)
+

 port config mtu
 ~~~~~~~~~~~~~~~
 
 port config mtu
 ~~~~~~~~~~~~~~~
 


@@ -3955,6 +3979,10 @@ This section lists supported pattern items and their attributes, if any.
 
   - ``proto_id {unsigned}``: PPP protocol identifier.
 
 
   - ``proto_id {unsigned}``: PPP protocol identifier.
 

+- ``l2tpv3oip``: match L2TPv3 over IP header.
+
+  - ``session_id {unsigned}``: L2TPv3 over IP session identifier.
+

 Actions list
 ^^^^^^^^^^^^
 
 Actions list
 ^^^^^^^^^^^^
 


@@ -4214,6 +4242,14 @@ This section lists supported actions and their attributes, if any.
 
   - ``value {unsigned}``: Value to decrease TCP acknowledgment number by.
 
 
   - ``value {unsigned}``: Value to decrease TCP acknowledgment number by.
 

+- ``set_ipv4_dscp``: Set IPv4 DSCP value with specified value
+
+  - ``dscp_value {unsigned}``: The new DSCP value to be set
+
+- ``set_ipv6_dscp``: Set IPv6 DSCP value with specified value
+
+  - ``dscp_value {unsigned}``: The new DSCP value to be set
+

 Destroying flow rules
 ~~~~~~~~~~~~~~~~~~~~~
 
 Destroying flow rules
 ~~~~~~~~~~~~~~~~~~~~~
 


@@ -4752,6 +4788,20 @@ Decapsulating VxLAN::
  testpmd> flow create 0 ingress pattern eth / ipv4 / udp / vxlan / eth / ipv4 /
         end actions raw_decap / queue index 0 / end
 
  testpmd> flow create 0 ingress pattern eth / ipv4 / udp / vxlan / eth / ipv4 /
         end actions raw_decap / queue index 0 / end
 

+Sample ESP rules
+~~~~~~~~~~~~~~~~
+
+ESP rules can be created by the following commands::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 / esp spi is 1 / end actions
+        queue index 3 / end
+ testpmd> flow create 0 ingress pattern eth / ipv4 / udp / esp spi is 1 / end
+        actions queue index 3 / end
+ testpmd> flow create 0 ingress pattern eth / ipv6 / esp spi is 1 / end actions
+        queue index 3 / end
+ testpmd> flow create 0 ingress pattern eth / ipv6 / udp / esp spi is 1 / end
+        actions queue index 3 / end
+

 BPF Functions
 --------------
 
 BPF Functions
 --------------