+ uint16_t len;
+ /*
+ * The opaque data field is pass through to the completion and can be
+ * used for any data that the driver wants to associate with this
+ * receive assembly buffer.
+ */
+ uint32_t opaque;
+ /*
+ * This is the host physical address where data for the packet may
+ * be placed in host memory.
+ */
+ uint64_t address;
+} __rte_packed;
+
+/* cmpl_base (size:128b/16B) */
+struct cmpl_base {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define CMPL_BASE_TYPE_MASK UINT32_C(0x3f)
+ #define CMPL_BASE_TYPE_SFT 0
+ /*
+ * TX L2 completion:
+ * Completion of TX packet. Length = 16B
+ */
+ #define CMPL_BASE_TYPE_TX_L2 UINT32_C(0x0)
+ /*
+ * NO-OP completion:
+ * Completion of NO-OP. Length = 16B
+ */
+ #define CMPL_BASE_TYPE_NO_OP UINT32_C(0x1)
+ /*
+ * TX L2 coalesced completion:
+ * Completion of coalesced TX packet. Length = 16B
+ */
+ #define CMPL_BASE_TYPE_TX_L2_COAL UINT32_C(0x2)
+ /*
+ * TX L2 PTP completion:
+ * Completion of PTP TX packet. Length = 32B
+ */
+ #define CMPL_BASE_TYPE_TX_L2_PTP UINT32_C(0x3)
+ /*
+ * RX L2 TPA Start V2 Completion:
+ * Completion of and L2 RX packet. Length = 32B
+ * This is the new version of the RX_TPA_START completion used
+ * in SR2 and later chips.
+ */
+ #define CMPL_BASE_TYPE_RX_TPA_START_V2 UINT32_C(0xd)
+ /*
+ * RX L2 V2 completion:
+ * Completion of and L2 RX packet. Length = 32B
+ * This is the new version of the RX_L2 completion used in SR2
+ * and later chips.
+ */
+ #define CMPL_BASE_TYPE_RX_L2_V2 UINT32_C(0xf)
+ /*
+ * RX L2 completion:
+ * Completion of and L2 RX packet. Length = 32B
+ */
+ #define CMPL_BASE_TYPE_RX_L2 UINT32_C(0x11)
+ /*
+ * RX Aggregation Buffer completion :
+ * Completion of an L2 aggregation buffer in support of
+ * TPA, HDS, or Jumbo packet completion. Length = 16B
+ */
+ #define CMPL_BASE_TYPE_RX_AGG UINT32_C(0x12)
+ /*
+ * RX L2 TPA Start Completion:
+ * Completion at the beginning of a TPA operation.
+ * Length = 32B
+ */
+ #define CMPL_BASE_TYPE_RX_TPA_START UINT32_C(0x13)
+ /*
+ * RX L2 TPA End Completion:
+ * Completion at the end of a TPA operation.
+ * Length = 32B
+ */
+ #define CMPL_BASE_TYPE_RX_TPA_END UINT32_C(0x15)
+ /*
+ * Statistics Ejection Completion:
+ * Completion of statistics data ejection buffer.
+ * Length = 16B
+ */
+ #define CMPL_BASE_TYPE_STAT_EJECT UINT32_C(0x1a)
+ /*
+ * VEE Flush Completion:
+ * This completion is inserted manually by
+ * the Primate and processed by the VEE hardware to ensure that
+ * all completions on a VEE function have been processed by the
+ * VEE hardware before FLR process is completed.
+ */
+ #define CMPL_BASE_TYPE_VEE_FLUSH UINT32_C(0x1c)
+ /*
+ * Mid Path Short Completion :
+ * Completion of a Mid Path Command. Length = 16B
+ */
+ #define CMPL_BASE_TYPE_MID_PATH_SHORT UINT32_C(0x1e)
+ /*
+ * Mid Path Long Completion :
+ * Completion of a Mid Path Command. Length = 32B
+ */
+ #define CMPL_BASE_TYPE_MID_PATH_LONG UINT32_C(0x1f)
+ /*
+ * HWRM Command Completion:
+ * Completion of an HWRM command.
+ */
+ #define CMPL_BASE_TYPE_HWRM_DONE UINT32_C(0x20)
+ /* Forwarded HWRM Request */
+ #define CMPL_BASE_TYPE_HWRM_FWD_REQ UINT32_C(0x22)
+ /* Forwarded HWRM Response */
+ #define CMPL_BASE_TYPE_HWRM_FWD_RESP UINT32_C(0x24)
+ /* HWRM Asynchronous Event Information */
+ #define CMPL_BASE_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
+ /* CQ Notification */
+ #define CMPL_BASE_TYPE_CQ_NOTIFICATION UINT32_C(0x30)
+ /* SRQ Threshold Event */
+ #define CMPL_BASE_TYPE_SRQ_EVENT UINT32_C(0x32)
+ /* DBQ Threshold Event */
+ #define CMPL_BASE_TYPE_DBQ_EVENT UINT32_C(0x34)
+ /* QP Async Notification */
+ #define CMPL_BASE_TYPE_QP_EVENT UINT32_C(0x38)
+ /* Function Async Notification */
+ #define CMPL_BASE_TYPE_FUNC_EVENT UINT32_C(0x3a)
+ #define CMPL_BASE_TYPE_LAST CMPL_BASE_TYPE_FUNC_EVENT
+ /* info1 is 16 b */
+ uint16_t info1;
+ /* info2 is 32 b */
+ uint32_t info2;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ uint32_t info3_v;
+ #define CMPL_BASE_V UINT32_C(0x1)
+ #define CMPL_BASE_INFO3_MASK UINT32_C(0xfffffffe)
+ #define CMPL_BASE_INFO3_SFT 1
+ /* info4 is 32 b */
+ uint32_t info4;
+} __rte_packed;
+
+/* tx_cmpl (size:128b/16B) */
+struct tx_cmpl {
+ uint16_t flags_type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define TX_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define TX_CMPL_TYPE_SFT 0
+ /*
+ * TX L2 completion:
+ * Completion of TX packet. Length = 16B
+ */
+ #define TX_CMPL_TYPE_TX_L2 UINT32_C(0x0)
+ #define TX_CMPL_TYPE_LAST TX_CMPL_TYPE_TX_L2
+ #define TX_CMPL_FLAGS_MASK UINT32_C(0xffc0)
+ #define TX_CMPL_FLAGS_SFT 6
+ /*
+ * When this bit is '1', it indicates a packet that has an
+ * error of some type. Type of error is indicated in
+ * error_flags.
+ */
+ #define TX_CMPL_FLAGS_ERROR UINT32_C(0x40)
+ /*
+ * When this bit is '1', it indicates that the packet completed
+ * was transmitted using the push acceleration data provided
+ * by the driver. When this bit is '0', it indicates that the
+ * packet had not push acceleration data written or was executed
+ * as a normal packet even though push data was provided.
+ */
+ #define TX_CMPL_FLAGS_PUSH UINT32_C(0x80)
+ /* unused1 is 16 b */
+ uint16_t unused_0;
+ /*
+ * This is a copy of the opaque field from the first TX BD of this
+ * transmitted packet. Note that, if the packet was described by a short
+ * CSO or short CSO inline BD, then the 16-bit opaque field from the
+ * short CSO BD will appear in the bottom 16 bits of this field.
+ */
+ uint32_t opaque;
+ uint16_t errors_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define TX_CMPL_V UINT32_C(0x1)
+ #define TX_CMPL_ERRORS_MASK UINT32_C(0xfffe)
+ #define TX_CMPL_ERRORS_SFT 1
+ /*
+ * This error indicates that there was some sort of problem
+ * with the BDs for the packet.
+ */
+ #define TX_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe)
+ #define TX_CMPL_ERRORS_BUFFER_ERROR_SFT 1
+ /* No error */
+ #define TX_CMPL_ERRORS_BUFFER_ERROR_NO_ERROR \
+ (UINT32_C(0x0) << 1)
+ /*
+ * Bad Format:
+ * BDs were not formatted correctly.
+ */
+ #define TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT \
+ (UINT32_C(0x2) << 1)
+ #define TX_CMPL_ERRORS_BUFFER_ERROR_LAST \
+ TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT
+ /*
+ * When this bit is '1', it indicates that the length of
+ * the packet was zero. No packet was transmitted.
+ */
+ #define TX_CMPL_ERRORS_ZERO_LENGTH_PKT UINT32_C(0x10)
+ /*
+ * When this bit is '1', it indicates that the packet
+ * was longer than the programmed limit in TDI. No
+ * packet was transmitted.
+ */
+ #define TX_CMPL_ERRORS_EXCESSIVE_BD_LENGTH UINT32_C(0x20)
+ /*
+ * When this bit is '1', it indicates that one or more of the
+ * BDs associated with this packet generated a PCI error.
+ * This probably means the address was not valid.
+ */
+ #define TX_CMPL_ERRORS_DMA_ERROR UINT32_C(0x40)
+ /*
+ * When this bit is '1', it indicates that the packet was longer
+ * than indicated by the hint. No packet was transmitted.
+ */
+ #define TX_CMPL_ERRORS_HINT_TOO_SHORT UINT32_C(0x80)
+ /*
+ * When this bit is '1', it indicates that the packet was
+ * dropped due to Poison TLP error on one or more of the
+ * TLPs in the PXP completion.
+ */
+ #define TX_CMPL_ERRORS_POISON_TLP_ERROR UINT32_C(0x100)
+ /*
+ * When this bit is '1', it indicates that the packet was dropped
+ * due to a transient internal error in TDC. The packet or LSO can
+ * be retried and may transmit successfully on a subsequent attempt.
+ */
+ #define TX_CMPL_ERRORS_INTERNAL_ERROR UINT32_C(0x200)
+ /*
+ * When this bit is '1', it was not possible to collect a a timestamp
+ * for a PTP completion, in which case the timestamp_hi and
+ * timestamp_lo fields are invalid. When this bit is '0' for a PTP
+ * completion, the timestamp_hi and timestamp_lo fields are valid.
+ * RJRN will copy the value of this bit into the field of the same
+ * name in all TX completions, regardless of whether such completions
+ * are PTP completions or other TX completions.
+ */
+ #define TX_CMPL_ERRORS_TIMESTAMP_INVALID_ERROR UINT32_C(0x400)
+ /* unused2 is 16 b */
+ uint16_t unused_1;
+ /* unused3 is 32 b */
+ uint32_t unused_2;
+} __rte_packed;
+
+/* tx_cmpl_coal (size:128b/16B) */
+struct tx_cmpl_coal {
+ uint16_t flags_type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define TX_CMPL_COAL_TYPE_MASK UINT32_C(0x3f)
+ #define TX_CMPL_COAL_TYPE_SFT 0
+ /*
+ * TX L2 coalesced completion:
+ * Completion of TX packet. Length = 16B
+ */
+ #define TX_CMPL_COAL_TYPE_TX_L2_COAL UINT32_C(0x2)
+ #define TX_CMPL_COAL_TYPE_LAST TX_CMPL_COAL_TYPE_TX_L2_COAL
+ #define TX_CMPL_COAL_FLAGS_MASK UINT32_C(0xffc0)
+ #define TX_CMPL_COAL_FLAGS_SFT 6
+ /*
+ * When this bit is '1', it indicates a packet that has an
+ * error of some type. Type of error is indicated in
+ * error_flags.
+ */
+ #define TX_CMPL_COAL_FLAGS_ERROR UINT32_C(0x40)
+ /*
+ * When this bit is '1', it indicates that the packet completed
+ * was transmitted using the push acceleration data provided
+ * by the driver. When this bit is '0', it indicates that the
+ * packet had not push acceleration data written or was executed
+ * as a normal packet even though push data was provided.
+ */
+ #define TX_CMPL_COAL_FLAGS_PUSH UINT32_C(0x80)
+ /* unused1 is 16 b */
+ uint16_t unused_0;
+ /*
+ * This is a copy of the opaque field from the first TX BD of the packet
+ * which corresponds with the reported sq_cons_idx. Note that, with
+ * coalesced completions, completions are generated for only some of the
+ * packets. The driver will see the opaque field for only those packets.
+ * Note that, if the packet was described by a short CSO or short CSO
+ * inline BD, then the 16-bit opaque field from the short CSO BD will
+ * appear in the bottom 16 bits of this field. For TX rings with
+ * completion coalescing enabled (which would use the coalesced
+ * completion record), it is suggested that the driver populate the
+ * opaque field to indicate the specific TX ring with which the
+ * completion is associated, then utilize the opaque and sq_cons_idx
+ * fields in the coalesced completion record to determine the specific
+ * packets that are to be completed on that ring.
+ */
+ uint32_t opaque;
+ uint16_t errors_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define TX_CMPL_COAL_V UINT32_C(0x1)
+ #define TX_CMPL_COAL_ERRORS_MASK \
+ UINT32_C(0xfffe)
+ #define TX_CMPL_COAL_ERRORS_SFT 1
+ /*
+ * This error indicates that there was some sort of problem
+ * with the BDs for the packet.
+ */
+ #define TX_CMPL_COAL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe)
+ #define TX_CMPL_COAL_ERRORS_BUFFER_ERROR_SFT 1
+ /* No error */
+ #define TX_CMPL_COAL_ERRORS_BUFFER_ERROR_NO_ERROR \
+ (UINT32_C(0x0) << 1)
+ /*
+ * Bad Format:
+ * BDs were not formatted correctly.
+ */
+ #define TX_CMPL_COAL_ERRORS_BUFFER_ERROR_BAD_FMT \
+ (UINT32_C(0x2) << 1)
+ #define TX_CMPL_COAL_ERRORS_BUFFER_ERROR_LAST \
+ TX_CMPL_COAL_ERRORS_BUFFER_ERROR_BAD_FMT
+ /*
+ * When this bit is '1', it indicates that the length of
+ * the packet was zero. No packet was transmitted.
+ */
+ #define TX_CMPL_COAL_ERRORS_ZERO_LENGTH_PKT UINT32_C(0x10)
+ /*
+ * When this bit is '1', it indicates that the packet
+ * was longer than the programmed limit in TDI. No
+ * packet was transmitted.
+ */
+ #define TX_CMPL_COAL_ERRORS_EXCESSIVE_BD_LENGTH UINT32_C(0x20)
+ /*
+ * When this bit is '1', it indicates that one or more of the
+ * BDs associated with this packet generated a PCI error.
+ * This probably means the address was not valid.
+ */
+ #define TX_CMPL_COAL_ERRORS_DMA_ERROR UINT32_C(0x40)
+ /*
+ * When this bit is '1', it indicates that the packet was longer
+ * than indicated by the hint. No packet was transmitted.
+ */
+ #define TX_CMPL_COAL_ERRORS_HINT_TOO_SHORT UINT32_C(0x80)
+ /*
+ * When this bit is '1', it indicates that the packet was
+ * dropped due to Poison TLP error on one or more of the
+ * TLPs in the PXP completion.
+ */
+ #define TX_CMPL_COAL_ERRORS_POISON_TLP_ERROR \
+ UINT32_C(0x100)
+ /*
+ * When this bit is '1', it indicates that the packet was dropped
+ * due to a transient internal error in TDC. The packet or LSO can
+ * be retried and may transmit successfully on a subsequent attempt.
+ */
+ #define TX_CMPL_COAL_ERRORS_INTERNAL_ERROR \
+ UINT32_C(0x200)
+ /*
+ * When this bit is '1', it was not possible to collect a a timestamp
+ * for a PTP completion, in which case the timestamp_hi and
+ * timestamp_lo fields are invalid. When this bit is '0' for a PTP
+ * completion, the timestamp_hi and timestamp_lo fields are valid.
+ * RJRN will copy the value of this bit into the field of the same
+ * name in all TX completions, regardless of whether such
+ * completions are PTP completions or other TX completions.
+ */
+ #define TX_CMPL_COAL_ERRORS_TIMESTAMP_INVALID_ERROR \
+ UINT32_C(0x400)
+ /* unused2 is 16 b */
+ uint16_t unused_1;
+ uint32_t sq_cons_idx;
+ /*
+ * This value is SQ index for the start of the packet following the
+ * last completed packet.
+ */
+ #define TX_CMPL_COAL_SQ_CONS_IDX_MASK UINT32_C(0xffffff)
+ #define TX_CMPL_COAL_SQ_CONS_IDX_SFT 0
+} __rte_packed;
+
+/* tx_cmpl_ptp (size:128b/16B) */
+struct tx_cmpl_ptp {
+ uint16_t flags_type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define TX_CMPL_PTP_TYPE_MASK UINT32_C(0x3f)
+ #define TX_CMPL_PTP_TYPE_SFT 0
+ /*
+ * TX L2 PTP completion:
+ * Completion of TX packet. Length = 32B
+ */
+ #define TX_CMPL_PTP_TYPE_TX_L2_PTP UINT32_C(0x2)
+ #define TX_CMPL_PTP_TYPE_LAST TX_CMPL_PTP_TYPE_TX_L2_PTP
+ #define TX_CMPL_PTP_FLAGS_MASK UINT32_C(0xffc0)
+ #define TX_CMPL_PTP_FLAGS_SFT 6
+ /*
+ * When this bit is '1', it indicates a packet that has an
+ * error of some type. Type of error is indicated in
+ * error_flags.
+ */
+ #define TX_CMPL_PTP_FLAGS_ERROR UINT32_C(0x40)
+ /*
+ * When this bit is '1', it indicates that the packet completed
+ * was transmitted using the push acceleration data provided
+ * by the driver. When this bit is '0', it indicates that the
+ * packet had not push acceleration data written or was executed
+ * as a normal packet even though push data was provided.
+ */
+ #define TX_CMPL_PTP_FLAGS_PUSH UINT32_C(0x80)
+ /* unused1 is 16 b */
+ uint16_t unused_0;
+ /*
+ * This is a copy of the opaque field from the first TX BD of this
+ * transmitted packet. Note that, if the packet was described by a short
+ * CSO or short CSO inline BD, then the 16-bit opaque field from the
+ * short CSO BD will appear in the bottom 16 bits of this field.
+ */
+ uint32_t opaque;
+ uint16_t errors_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define TX_CMPL_PTP_V UINT32_C(0x1)
+ #define TX_CMPL_PTP_ERRORS_MASK UINT32_C(0xfffe)
+ #define TX_CMPL_PTP_ERRORS_SFT 1
+ /*
+ * This error indicates that there was some sort of problem
+ * with the BDs for the packet.
+ */
+ #define TX_CMPL_PTP_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe)
+ #define TX_CMPL_PTP_ERRORS_BUFFER_ERROR_SFT 1
+ /* No error */
+ #define TX_CMPL_PTP_ERRORS_BUFFER_ERROR_NO_ERROR \
+ (UINT32_C(0x0) << 1)
+ /*
+ * Bad Format:
+ * BDs were not formatted correctly.
+ */
+ #define TX_CMPL_PTP_ERRORS_BUFFER_ERROR_BAD_FMT \
+ (UINT32_C(0x2) << 1)
+ #define TX_CMPL_PTP_ERRORS_BUFFER_ERROR_LAST \
+ TX_CMPL_PTP_ERRORS_BUFFER_ERROR_BAD_FMT
+ /*
+ * When this bit is '1', it indicates that the length of
+ * the packet was zero. No packet was transmitted.
+ */
+ #define TX_CMPL_PTP_ERRORS_ZERO_LENGTH_PKT UINT32_C(0x10)
+ /*
+ * When this bit is '1', it indicates that the packet
+ * was longer than the programmed limit in TDI. No
+ * packet was transmitted.
+ */
+ #define TX_CMPL_PTP_ERRORS_EXCESSIVE_BD_LENGTH UINT32_C(0x20)
+ /*
+ * When this bit is '1', it indicates that one or more of the
+ * BDs associated with this packet generated a PCI error.
+ * This probably means the address was not valid.
+ */
+ #define TX_CMPL_PTP_ERRORS_DMA_ERROR UINT32_C(0x40)
+ /*
+ * When this bit is '1', it indicates that the packet was longer
+ * than indicated by the hint. No packet was transmitted.
+ */
+ #define TX_CMPL_PTP_ERRORS_HINT_TOO_SHORT UINT32_C(0x80)
+ /*
+ * When this bit is '1', it indicates that the packet was
+ * dropped due to Poison TLP error on one or more of the
+ * TLPs in the PXP completion.
+ */
+ #define TX_CMPL_PTP_ERRORS_POISON_TLP_ERROR UINT32_C(0x100)
+ /*
+ * When this bit is '1', it indicates that the packet was dropped due
+ * to a transient internal error in TDC. The packet or LSO can be
+ * retried and may transmit successfully on a subsequent attempt.
+ */
+ #define TX_CMPL_PTP_ERRORS_INTERNAL_ERROR UINT32_C(0x200)
+ /*
+ * When this bit is '1', it was not possible to collect a a timestamp
+ * for a PTP completion, in which case the timestamp_hi and
+ * timestamp_lo fields are invalid. When this bit is '0' for a PTP
+ * completion, the timestamp_hi and timestamp_lo fields are valid.
+ * RJRN will copy the value of this bit into the field of the same
+ * name in all TX completions, regardless of whether such
+ * completions are PTP completions or other TX completions.
+ */
+ #define TX_CMPL_PTP_ERRORS_TIMESTAMP_INVALID_ERROR UINT32_C(0x400)
+ /* unused2 is 16 b */
+ uint16_t unused_1;
+ /*
+ * This is timestamp value (lower 32bits) read from PM for the PTP
+ * timestamp enabled packet.
+ */
+ uint32_t timestamp_lo;
+} __rte_packed;
+
+/* tx_cmpl_ptp_hi (size:128b/16B) */
+struct tx_cmpl_ptp_hi {
+ /*
+ * This is timestamp value (lower 32bits) read from PM for the PTP
+ * timestamp enabled packet.
+ */
+ uint16_t timestamp_hi[3];
+ uint16_t reserved16;
+ uint64_t v2;
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue.The even passes will write 1.
+ * The odd passes will write 0
+ */
+ #define TX_CMPL_PTP_HI_V2 UINT32_C(0x1)
+} __rte_packed;
+
+/* rx_pkt_cmpl (size:128b/16B) */
+struct rx_pkt_cmpl {
+ uint16_t flags_type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define RX_PKT_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define RX_PKT_CMPL_TYPE_SFT 0
+ /*
+ * RX L2 completion:
+ * Completion of and L2 RX packet. Length = 32B
+ */
+ #define RX_PKT_CMPL_TYPE_RX_L2 UINT32_C(0x11)
+ #define RX_PKT_CMPL_TYPE_LAST RX_PKT_CMPL_TYPE_RX_L2
+ #define RX_PKT_CMPL_FLAGS_MASK UINT32_C(0xffc0)
+ #define RX_PKT_CMPL_FLAGS_SFT 6
+ /*
+ * When this bit is '1', it indicates a packet that has an
+ * error of some type. Type of error is indicated in
+ * error_flags.
+ */
+ #define RX_PKT_CMPL_FLAGS_ERROR UINT32_C(0x40)
+ /* This field indicates how the packet was placed in the buffer. */
+ #define RX_PKT_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380)
+ #define RX_PKT_CMPL_FLAGS_PLACEMENT_SFT 7
+ /*
+ * Normal:
+ * Packet was placed using normal algorithm.
+ */
+ #define RX_PKT_CMPL_FLAGS_PLACEMENT_NORMAL (UINT32_C(0x0) << 7)
+ /*
+ * Jumbo:
+ * Packet was placed using jumbo algorithm.
+ */
+ #define RX_PKT_CMPL_FLAGS_PLACEMENT_JUMBO (UINT32_C(0x1) << 7)
+ /*
+ * Header/Data Separation:
+ * Packet was placed using Header/Data separation algorithm.
+ * The separation location is indicated by the itype field.
+ */
+ #define RX_PKT_CMPL_FLAGS_PLACEMENT_HDS (UINT32_C(0x2) << 7)
+ #define RX_PKT_CMPL_FLAGS_PLACEMENT_LAST \
+ RX_PKT_CMPL_FLAGS_PLACEMENT_HDS
+ /* This bit is '1' if the RSS field in this completion is valid. */
+ #define RX_PKT_CMPL_FLAGS_RSS_VALID UINT32_C(0x400)
+ /* unused is 1 b */
+ #define RX_PKT_CMPL_FLAGS_UNUSED UINT32_C(0x800)
+ /*
+ * This value indicates what the inner packet determined for the
+ * packet was.
+ */
+ #define RX_PKT_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000)
+ #define RX_PKT_CMPL_FLAGS_ITYPE_SFT 12
+ /*
+ * Not Known:
+ * Indicates that the packet type was not known.
+ */
+ #define RX_PKT_CMPL_FLAGS_ITYPE_NOT_KNOWN \
+ (UINT32_C(0x0) << 12)
+ /*
+ * IP Packet:
+ * Indicates that the packet was an IP packet, but further
+ * classification was not possible.
+ */
+ #define RX_PKT_CMPL_FLAGS_ITYPE_IP \
+ (UINT32_C(0x1) << 12)
+ /*
+ * TCP Packet:
+ * Indicates that the packet was IP and TCP.
+ * This indicates that the payload_offset field is valid.
+ */
+ #define RX_PKT_CMPL_FLAGS_ITYPE_TCP \
+ (UINT32_C(0x2) << 12)
+ /*
+ * UDP Packet:
+ * Indicates that the packet was IP and UDP.
+ * This indicates that the payload_offset field is valid.
+ */
+ #define RX_PKT_CMPL_FLAGS_ITYPE_UDP \
+ (UINT32_C(0x3) << 12)
+ /*
+ * FCoE Packet:
+ * Indicates that the packet was recognized as a FCoE.
+ * This also indicates that the payload_offset field is valid.
+ */
+ #define RX_PKT_CMPL_FLAGS_ITYPE_FCOE \
+ (UINT32_C(0x4) << 12)
+ /*
+ * RoCE Packet:
+ * Indicates that the packet was recognized as a RoCE.
+ * This also indicates that the payload_offset field is valid.
+ */
+ #define RX_PKT_CMPL_FLAGS_ITYPE_ROCE \
+ (UINT32_C(0x5) << 12)
+ /*
+ * ICMP Packet:
+ * Indicates that the packet was recognized as ICMP.
+ * This indicates that the payload_offset field is valid.
+ */
+ #define RX_PKT_CMPL_FLAGS_ITYPE_ICMP \
+ (UINT32_C(0x7) << 12)
+ /*
+ * PtP packet wo/timestamp:
+ * Indicates that the packet was recognized as a PtP
+ * packet.
+ */
+ #define RX_PKT_CMPL_FLAGS_ITYPE_PTP_WO_TIMESTAMP \
+ (UINT32_C(0x8) << 12)
+ /*
+ * PtP packet w/timestamp:
+ * Indicates that the packet was recognized as a PtP
+ * packet and that a timestamp was taken for the packet.
+ */
+ #define RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP \
+ (UINT32_C(0x9) << 12)
+ #define RX_PKT_CMPL_FLAGS_ITYPE_LAST \
+ RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP
+ /*
+ * This is the length of the data for the packet stored in the
+ * buffer(s) identified by the opaque value. This includes
+ * the packet BD and any associated buffer BDs. This does not include
+ * the length of any data places in aggregation BDs.
+ */
+ uint16_t len;
+ /*
+ * This is a copy of the opaque field from the RX BD this completion
+ * corresponds to.
+ */
+ uint32_t opaque;
+ uint8_t agg_bufs_v1;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define RX_PKT_CMPL_V1 UINT32_C(0x1)
+ /*
+ * This value is the number of aggregation buffers that follow this
+ * entry in the completion ring that are a part of this packet.
+ * If the value is zero, then the packet is completely contained
+ * in the buffer space provided for the packet in the RX ring.
+ */
+ #define RX_PKT_CMPL_AGG_BUFS_MASK UINT32_C(0x3e)
+ #define RX_PKT_CMPL_AGG_BUFS_SFT 1
+ /* unused1 is 2 b */
+ #define RX_PKT_CMPL_UNUSED1_MASK UINT32_C(0xc0)
+ #define RX_PKT_CMPL_UNUSED1_SFT 6
+ /*
+ * This is the RSS hash type for the packet. The value is packed
+ * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}.
+ *
+ * The value of tuple_extrac_op provides the information about
+ * what fields the hash was computed on.
+ * * 0: The RSS hash was computed over source IP address,
+ * destination IP address, source port, and destination port of inner
+ * IP and TCP or UDP headers. Note: For non-tunneled packets,
+ * the packet headers are considered inner packet headers for the RSS
+ * hash computation purpose.
+ * * 1: The RSS hash was computed over source IP address and destination
+ * IP address of inner IP header. Note: For non-tunneled packets,
+ * the packet headers are considered inner packet headers for the RSS
+ * hash computation purpose.
+ * * 2: The RSS hash was computed over source IP address,
+ * destination IP address, source port, and destination port of
+ * IP and TCP or UDP headers of outer tunnel headers.
+ * Note: For non-tunneled packets, this value is not applicable.
+ * * 3: The RSS hash was computed over source IP address and
+ * destination IP address of IP header of outer tunnel headers.
+ * Note: For non-tunneled packets, this value is not applicable.
+ *
+ * Note that 4-tuples values listed above are applicable
+ * for layer 4 protocols supported and enabled for RSS in the hardware,
+ * HWRM firmware, and drivers. For example, if RSS hash is supported and
+ * enabled for TCP traffic only, then the values of tuple_extract_op
+ * corresponding to 4-tuples are only valid for TCP traffic.
+ */
+ uint8_t rss_hash_type;
+ /*
+ * This value indicates the offset in bytes from the beginning of the packet
+ * where the inner payload starts. This value is valid for TCP, UDP,
+ * FCoE, and RoCE packets.
+ *
+ * A value of zero indicates that header is 256B into the packet.
+ */
+ uint8_t payload_offset;
+ /* unused2 is 8 b */
+ uint8_t unused1;
+ /*
+ * This value is the RSS hash value calculated for the packet
+ * based on the mode bits and key value in the VNIC.
+ */
+ uint32_t rss_hash;
+} __rte_packed;
+
+/* Last 16 bytes of rx_pkt_cmpl. */
+/* rx_pkt_cmpl_hi (size:128b/16B) */
+struct rx_pkt_cmpl_hi {
+ uint32_t flags2;
+ /*
+ * This indicates that the ip checksum was calculated for the
+ * inner packet and that the ip_cs_error field indicates if there
+ * was an error.
+ */
+ #define RX_PKT_CMPL_FLAGS2_IP_CS_CALC UINT32_C(0x1)
+ /*
+ * This indicates that the TCP, UDP or ICMP checksum was
+ * calculated for the inner packet and that the l4_cs_error field
+ * indicates if there was an error.
+ */
+ #define RX_PKT_CMPL_FLAGS2_L4_CS_CALC UINT32_C(0x2)
+ /*
+ * This indicates that the ip checksum was calculated for the
+ * tunnel header and that the t_ip_cs_error field indicates if there
+ * was an error.
+ */
+ #define RX_PKT_CMPL_FLAGS2_T_IP_CS_CALC UINT32_C(0x4)
+ /*
+ * This indicates that the UDP checksum was
+ * calculated for the tunnel packet and that the t_l4_cs_error field
+ * indicates if there was an error.
+ */
+ #define RX_PKT_CMPL_FLAGS2_T_L4_CS_CALC UINT32_C(0x8)
+ /* This value indicates what format the metadata field is. */
+ #define RX_PKT_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0)
+ #define RX_PKT_CMPL_FLAGS2_META_FORMAT_SFT 4
+ /* No metadata information. Value is zero. */
+ #define RX_PKT_CMPL_FLAGS2_META_FORMAT_NONE \
+ (UINT32_C(0x0) << 4)
+ /*
+ * The metadata field contains the VLAN tag and TPID value.
+ * - metadata[11:0] contains the vlan VID value.
+ * - metadata[12] contains the vlan DE value.
+ * - metadata[15:13] contains the vlan PRI value.
+ * - metadata[31:16] contains the vlan TPID value.
+ */
+ #define RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN \
+ (UINT32_C(0x1) << 4)
+ /*
+ * If ext_meta_format is equal to 1, the metadata field
+ * contains the lower 16b of the tunnel ID value, justified
+ * to LSB
+ * - VXLAN = VNI[23:0] -> VXLAN Network ID
+ * - Geneve (NGE) = VNI[23:0] a-> Virtual Network Identifier.
+ * - NVGRE = TNI[23:0] -> Tenant Network ID
+ * - GRE = KEY[31:0] -> key field with bit mask. zero if K = 0
+ * - IPV4 = 0 (not populated)
+ * - IPV6 = Flow Label[19:0]
+ * - PPPoE = sessionID[15:0]
+ * - MPLs = Outer label[19:0]
+ * - UPAR = Selected[31:0] with bit mask
+ */
+ #define RX_PKT_CMPL_FLAGS2_META_FORMAT_TUNNEL_ID \
+ (UINT32_C(0x2) << 4)
+ /*
+ * if ext_meta_format is equal to 1, metadata field contains
+ * 16b metadata from the prepended header (chdr_data).
+ */
+ #define RX_PKT_CMPL_FLAGS2_META_FORMAT_CHDR_DATA \
+ (UINT32_C(0x3) << 4)
+ /*
+ * If ext_meta_format is equal to 1, the metadata field contains
+ * the outer_l3_offset, inner_l2_offset, inner_l3_offset and
+ * inner_l4_size.
+ * - metadata[8:0] contains the outer_l3_offset.
+ * - metadata[17:9] contains the inner_l2_offset.
+ * - metadata[26:18] contains the inner_l3_offset.
+ * - metadata[31:27] contains the inner_l4_size.
+ */
+ #define RX_PKT_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET \
+ (UINT32_C(0x4) << 4)
+ #define RX_PKT_CMPL_FLAGS2_META_FORMAT_LAST \
+ RX_PKT_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET
+ /*
+ * This field indicates the IP type for the inner-most IP header.
+ * A value of '0' indicates IPv4. A value of '1' indicates IPv6.
+ * This value is only valid if itype indicates a packet
+ * with an IP header.
+ */
+ #define RX_PKT_CMPL_FLAGS2_IP_TYPE UINT32_C(0x100)
+ /*
+ * This indicates that the complete 1's complement checksum was
+ * calculated for the packet.
+ */
+ #define RX_PKT_CMPL_FLAGS2_COMPLETE_CHECKSUM_CALC UINT32_C(0x200)
+ /*
+ * The combination of this value and meta_format indicated what
+ * format the metadata field is.
+ */
+ #define RX_PKT_CMPL_FLAGS2_EXT_META_FORMAT_MASK UINT32_C(0xc00)
+ #define RX_PKT_CMPL_FLAGS2_EXT_META_FORMAT_SFT 10
+ /*
+ * This value is the complete 1's complement checksum calculated from
+ * the start of the outer L3 header to the end of the packet (not
+ * including the ethernet crc). It is valid when the
+ * 'complete_checksum_calc' flag is set.
+ */
+ #define RX_PKT_CMPL_FLAGS2_COMPLETE_CHECKSUM_MASK \
+ UINT32_C(0xffff0000)
+ #define RX_PKT_CMPL_FLAGS2_COMPLETE_CHECKSUM_SFT 16
+ /*
+ * This is data from the CFA block as indicated by the meta_format
+ * field.
+ */
+ uint32_t metadata;
+ /* When meta_format=1, this value is the VLAN VID. */
+ #define RX_PKT_CMPL_METADATA_VID_MASK UINT32_C(0xfff)
+ #define RX_PKT_CMPL_METADATA_VID_SFT 0
+ /* When meta_format=1, this value is the VLAN DE. */
+ #define RX_PKT_CMPL_METADATA_DE UINT32_C(0x1000)
+ /* When meta_format=1, this value is the VLAN PRI. */
+ #define RX_PKT_CMPL_METADATA_PRI_MASK UINT32_C(0xe000)
+ #define RX_PKT_CMPL_METADATA_PRI_SFT 13
+ /* When meta_format=1, this value is the VLAN TPID. */
+ #define RX_PKT_CMPL_METADATA_TPID_MASK UINT32_C(0xffff0000)
+ #define RX_PKT_CMPL_METADATA_TPID_SFT 16
+ uint16_t errors_v2;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define RX_PKT_CMPL_V2 \
+ UINT32_C(0x1)
+ #define RX_PKT_CMPL_ERRORS_MASK \
+ UINT32_C(0xfffe)
+ #define RX_PKT_CMPL_ERRORS_SFT 1
+ /*
+ * This error indicates that there was some sort of problem with
+ * the BDs for the packet that was found after part of the
+ * packet was already placed. The packet should be treated as
+ * invalid.
+ */
+ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_MASK \
+ UINT32_C(0xe)
+ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_SFT 1
+ /* No buffer error */
+ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER \
+ (UINT32_C(0x0) << 1)
+ /*
+ * Did Not Fit:
+ * Packet did not fit into packet buffer provided.
+ * For regular placement, this means the packet did not fit
+ * in the buffer provided. For HDS and jumbo placement, this
+ * means that the packet could not be placed into 7 physical
+ * buffers or less.
+ */
+ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_DID_NOT_FIT \
+ (UINT32_C(0x1) << 1)
+ /*
+ * Not On Chip:
+ * All BDs needed for the packet were not on-chip when
+ * the packet arrived.
+ */
+ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \
+ (UINT32_C(0x2) << 1)
+ /*
+ * Bad Format:
+ * BDs were not formatted correctly.
+ */
+ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \
+ (UINT32_C(0x3) << 1)
+ /*
+ * Flush:
+ * There was a bad_format error on the previous operation
+ */
+ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_FLUSH \
+ (UINT32_C(0x5) << 1)
+ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_LAST \
+ RX_PKT_CMPL_ERRORS_BUFFER_ERROR_FLUSH
+ /*
+ * This indicates that there was an error in the IP header
+ * checksum.
+ */
+ #define RX_PKT_CMPL_ERRORS_IP_CS_ERROR \
+ UINT32_C(0x10)
+ /*
+ * This indicates that there was an error in the TCP, UDP
+ * or ICMP checksum.
+ */
+ #define RX_PKT_CMPL_ERRORS_L4_CS_ERROR \
+ UINT32_C(0x20)
+ /*
+ * This indicates that there was an error in the tunnel
+ * IP header checksum.
+ */
+ #define RX_PKT_CMPL_ERRORS_T_IP_CS_ERROR \
+ UINT32_C(0x40)
+ /*
+ * This indicates that there was an error in the tunnel
+ * UDP checksum.
+ */
+ #define RX_PKT_CMPL_ERRORS_T_L4_CS_ERROR \
+ UINT32_C(0x80)
+ /*
+ * This indicates that there was a CRC error on either an FCoE
+ * or RoCE packet. The itype indicates the packet type.
+ */
+ #define RX_PKT_CMPL_ERRORS_CRC_ERROR \
+ UINT32_C(0x100)
+ /*
+ * This indicates that there was an error in the tunnel
+ * portion of the packet when this
+ * field is non-zero.
+ */
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_MASK \
+ UINT32_C(0xe00)
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_SFT 9
+ /*
+ * No additional error occurred on the tunnel portion
+ * or the packet of the packet does not have a tunnel.
+ */
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_NO_ERROR \
+ (UINT32_C(0x0) << 9)
+ /*
+ * Indicates that IP header version does not match
+ * expectation from L2 Ethertype for IPv4 and IPv6
+ * in the tunnel header.
+ */
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_VERSION \
+ (UINT32_C(0x1) << 9)
+ /*
+ * Indicates that header length is out of range in the
+ * tunnel header. Valid for
+ * IPv4.
+ */
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_HDR_LEN \
+ (UINT32_C(0x2) << 9)
+ /*
+ * Indicates that the physical packet is shorter than that
+ * claimed by the PPPoE header length for a tunnel PPPoE
+ * packet.
+ */
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_TUNNEL_TOTAL_ERROR \
+ (UINT32_C(0x3) << 9)
+ /*
+ * Indicates that physical packet is shorter than that claimed
+ * by the tunnel l3 header length. Valid for IPv4, or IPv6
+ * tunnel packet packets.
+ */
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_IP_TOTAL_ERROR \
+ (UINT32_C(0x4) << 9)
+ /*
+ * Indicates that the physical packet is shorter than that
+ * claimed by the tunnel UDP header length for a tunnel
+ * UDP packet that is not fragmented.
+ */
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_UDP_TOTAL_ERROR \
+ (UINT32_C(0x5) << 9)
+ /*
+ * indicates that the IPv4 TTL or IPv6 hop limit check
+ * have failed (e.g. TTL = 0) in the tunnel header. Valid
+ * for IPv4, and IPv6.
+ */
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_TTL \
+ (UINT32_C(0x6) << 9)
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_LAST \
+ RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_TTL
+ /*
+ * This indicates that there was an error in the inner
+ * portion of the packet when this
+ * field is non-zero.
+ */
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_MASK \
+ UINT32_C(0xf000)
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_SFT 12
+ /*
+ * No additional error occurred on the tunnel portion
+ * or the packet of the packet does not have a tunnel.
+ */
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_NO_ERROR \
+ (UINT32_C(0x0) << 12)
+ /*
+ * Indicates that IP header version does not match
+ * expectation from L2 Ethertype for IPv4 and IPv6 or that
+ * option other than VFT was parsed on
+ * FCoE packet.
+ */
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_VERSION \
+ (UINT32_C(0x1) << 12)
+ /*
+ * indicates that header length is out of range. Valid for
+ * IPv4 and RoCE
+ */
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_HDR_LEN \
+ (UINT32_C(0x2) << 12)
+ /*
+ * indicates that the IPv4 TTL or IPv6 hop limit check
+ * have failed (e.g. TTL = 0). Valid for IPv4, and IPv6
+ */
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_TTL \
+ (UINT32_C(0x3) << 12)
+ /*
+ * Indicates that physical packet is shorter than that
+ * claimed by the l3 header length. Valid for IPv4,
+ * IPv6 packet or RoCE packets.
+ */
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_IP_TOTAL_ERROR \
+ (UINT32_C(0x4) << 12)
+ /*
+ * Indicates that the physical packet is shorter than that
+ * claimed by the UDP header length for a UDP packet that is
+ * not fragmented.
+ */
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_UDP_TOTAL_ERROR \
+ (UINT32_C(0x5) << 12)
+ /*
+ * Indicates that TCP header length > IP payload. Valid for
+ * TCP packets only.
+ */
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN \
+ (UINT32_C(0x6) << 12)
+ /* Indicates that TCP header length < 5. Valid for TCP. */
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN_TOO_SMALL \
+ (UINT32_C(0x7) << 12)
+ /*
+ * Indicates that TCP option headers result in a TCP header
+ * size that does not match data offset in TCP header. Valid
+ * for TCP.
+ */
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_OPT_LEN \
+ (UINT32_C(0x8) << 12)
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_LAST \
+ RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_OPT_LEN
+ /*
+ * This field identifies the CFA action rule that was used for this
+ * packet.
+ */
+ uint16_t cfa_code;
+ uint32_t reorder;
+ /*
+ * This value holds the reordering sequence number for the packet.
+ * If the reordering sequence is not valid, then this value is zero.
+ * The reordering domain for the packet is in the bottom 8 to 10b of
+ * the rss_hash value. The bottom 20b of this value contain the
+ * ordering domain value for the packet.
+ */
+ #define RX_PKT_CMPL_REORDER_MASK UINT32_C(0xffffff)
+ #define RX_PKT_CMPL_REORDER_SFT 0
+} __rte_packed;
+
+/* rx_pkt_v2_cmpl (size:128b/16B) */
+struct rx_pkt_v2_cmpl {
+ uint16_t flags_type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define RX_PKT_V2_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define RX_PKT_V2_CMPL_TYPE_SFT 0
+ /*
+ * RX L2 V2 completion:
+ * Completion of and L2 RX packet. Length = 32B
+ * This is the new version of the RX_L2 completion used in SR2
+ * and later chips.
+ */
+ #define RX_PKT_V2_CMPL_TYPE_RX_L2_V2 UINT32_C(0xf)
+ #define RX_PKT_V2_CMPL_TYPE_LAST \
+ RX_PKT_V2_CMPL_TYPE_RX_L2_V2
+ #define RX_PKT_V2_CMPL_FLAGS_MASK UINT32_C(0xffc0)
+ #define RX_PKT_V2_CMPL_FLAGS_SFT 6
+ /*
+ * When this bit is '1', it indicates a packet that has an
+ * error of some type. Type of error is indicated in
+ * error_flags.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_ERROR UINT32_C(0x40)
+ /* This field indicates how the packet was placed in the buffer. */
+ #define RX_PKT_V2_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380)
+ #define RX_PKT_V2_CMPL_FLAGS_PLACEMENT_SFT 7
+ /*
+ * Normal:
+ * Packet was placed using normal algorithm.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_PLACEMENT_NORMAL \
+ (UINT32_C(0x0) << 7)
+ /*
+ * Jumbo:
+ * Packet was placed using jumbo algorithm.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_PLACEMENT_JUMBO \
+ (UINT32_C(0x1) << 7)
+ /*
+ * Header/Data Separation:
+ * Packet was placed using Header/Data separation algorithm.
+ * The separation location is indicated by the itype field.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_PLACEMENT_HDS \
+ (UINT32_C(0x2) << 7)
+ /*
+ * Truncation:
+ * Packet was placed using truncation algorithm. The
+ * placed (truncated) length is indicated in the payload_offset
+ * field. The original length is indicated in the len field.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_PLACEMENT_TRUNCATION \
+ (UINT32_C(0x3) << 7)
+ #define RX_PKT_V2_CMPL_FLAGS_PLACEMENT_LAST \
+ RX_PKT_V2_CMPL_FLAGS_PLACEMENT_TRUNCATION
+ /* This bit is '1' if the RSS field in this completion is valid. */
+ #define RX_PKT_V2_CMPL_FLAGS_RSS_VALID UINT32_C(0x400)
+ /*
+ * This bit is '1' if metadata has been added to the end of the
+ * packet in host memory. Metadata starts at the first 32B boundary
+ * after the end of the packet for regular and jumbo placement.
+ * It starts at the first 32B boundary after the end of the header
+ * for HDS placement. The length of the metadata is indicated in the
+ * metadata itself.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_PKT_METADATA_PRESENT UINT32_C(0x800)
+ /*
+ * This value indicates what the inner packet determined for the
+ * packet was.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000)
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_SFT 12
+ /*
+ * Not Known:
+ * Indicates that the packet type was not known.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_NOT_KNOWN \
+ (UINT32_C(0x0) << 12)
+ /*
+ * IP Packet:
+ * Indicates that the packet was an IP packet, but further
+ * classification was not possible.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_IP \
+ (UINT32_C(0x1) << 12)
+ /*
+ * TCP Packet:
+ * Indicates that the packet was IP and TCP.
+ * This indicates that the payload_offset field is valid.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_TCP \
+ (UINT32_C(0x2) << 12)
+ /*
+ * UDP Packet:
+ * Indicates that the packet was IP and UDP.
+ * This indicates that the payload_offset field is valid.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_UDP \
+ (UINT32_C(0x3) << 12)
+ /*
+ * FCoE Packet:
+ * Indicates that the packet was recognized as a FCoE.
+ * This also indicates that the payload_offset field is valid.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_FCOE \
+ (UINT32_C(0x4) << 12)
+ /*
+ * RoCE Packet:
+ * Indicates that the packet was recognized as a RoCE.
+ * This also indicates that the payload_offset field is valid.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_ROCE \
+ (UINT32_C(0x5) << 12)
+ /*
+ * ICMP Packet:
+ * Indicates that the packet was recognized as ICMP.
+ * This indicates that the payload_offset field is valid.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_ICMP \
+ (UINT32_C(0x7) << 12)
+ /*
+ * PtP packet wo/timestamp:
+ * Indicates that the packet was recognized as a PtP
+ * packet.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_PTP_WO_TIMESTAMP \
+ (UINT32_C(0x8) << 12)
+ /*
+ * PtP packet w/timestamp:
+ * Indicates that the packet was recognized as a PtP
+ * packet and that a timestamp was taken for the packet.
+ */
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP \
+ (UINT32_C(0x9) << 12)
+ #define RX_PKT_V2_CMPL_FLAGS_ITYPE_LAST \
+ RX_PKT_V2_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP
+ /*
+ * This is the length of the data for the packet stored in the
+ * buffer(s) identified by the opaque value. This includes
+ * the packet BD and any associated buffer BDs. This does not include
+ * the length of any data places in aggregation BDs.
+ */
+ uint16_t len;
+ /*
+ * This is a copy of the opaque field from the RX BD this completion
+ * corresponds to.
+ */
+ uint32_t opaque;
+ uint8_t agg_bufs_v1;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define RX_PKT_V2_CMPL_V1 UINT32_C(0x1)
+ /*
+ * This value is the number of aggregation buffers that follow this
+ * entry in the completion ring that are a part of this packet.
+ * If the value is zero, then the packet is completely contained
+ * in the buffer space provided for the packet in the RX ring.
+ */
+ #define RX_PKT_V2_CMPL_AGG_BUFS_MASK UINT32_C(0x3e)
+ #define RX_PKT_V2_CMPL_AGG_BUFS_SFT 1
+ /* unused1 is 2 b */
+ #define RX_PKT_V2_CMPL_UNUSED1_MASK UINT32_C(0xc0)
+ #define RX_PKT_V2_CMPL_UNUSED1_SFT 6
+ /*
+ * This is the RSS hash type for the packet. The value is packed
+ * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}.
+ *
+ * The value of tuple_extrac_op provides the information about
+ * what fields the hash was computed on.
+ * * 0: The RSS hash was computed over source IP address,
+ * destination IP address, source port, and destination port of inner
+ * IP and TCP or UDP headers. Note: For non-tunneled packets,
+ * the packet headers are considered inner packet headers for the RSS
+ * hash computation purpose.
+ * * 1: The RSS hash was computed over source IP address and destination
+ * IP address of inner IP header. Note: For non-tunneled packets,
+ * the packet headers are considered inner packet headers for the RSS
+ * hash computation purpose.
+ * * 2: The RSS hash was computed over source IP address,
+ * destination IP address, source port, and destination port of
+ * IP and TCP or UDP headers of outer tunnel headers.
+ * Note: For non-tunneled packets, this value is not applicable.
+ * * 3: The RSS hash was computed over source IP address and
+ * destination IP address of IP header of outer tunnel headers.
+ * Note: For non-tunneled packets, this value is not applicable.
+ *
+ * Note that 4-tuples values listed above are applicable
+ * for layer 4 protocols supported and enabled for RSS in the hardware,
+ * HWRM firmware, and drivers. For example, if RSS hash is supported and
+ * enabled for TCP traffic only, then the values of tuple_extract_op
+ * corresponding to 4-tuples are only valid for TCP traffic.
+ */
+ uint8_t rss_hash_type;
+ uint16_t metadata1_payload_offset;
+ /*
+ * This is data from the CFA as indicated by the meta_format field.
+ * If truncation placement is not used, this value indicates the offset
+ * in bytes from the beginning of the packet where the inner payload
+ * starts. This value is valid for TCP, UDP, FCoE, and RoCE packets. If
+ * truncation placement is used, this value represents the placed
+ * (truncated) length of the packet.
+ */
+ #define RX_PKT_V2_CMPL_PAYLOAD_OFFSET_MASK UINT32_C(0x1ff)
+ #define RX_PKT_V2_CMPL_PAYLOAD_OFFSET_SFT 0
+ /* This is data from the CFA as indicated by the meta_format field. */
+ #define RX_PKT_V2_CMPL_METADATA1_MASK UINT32_C(0xf000)
+ #define RX_PKT_V2_CMPL_METADATA1_SFT 12
+ /* When meta_format != 0, this value is the VLAN TPID_SEL. */
+ #define RX_PKT_V2_CMPL_METADATA1_TPID_SEL_MASK UINT32_C(0x7000)
+ #define RX_PKT_V2_CMPL_METADATA1_TPID_SEL_SFT 12
+ /* 0x88a8 */
+ #define RX_PKT_V2_CMPL_METADATA1_TPID_SEL_TPID88A8 \
+ (UINT32_C(0x0) << 12)
+ /* 0x8100 */
+ #define RX_PKT_V2_CMPL_METADATA1_TPID_SEL_TPID8100 \
+ (UINT32_C(0x1) << 12)
+ /* 0x9100 */
+ #define RX_PKT_V2_CMPL_METADATA1_TPID_SEL_TPID9100 \
+ (UINT32_C(0x2) << 12)
+ /* 0x9200 */
+ #define RX_PKT_V2_CMPL_METADATA1_TPID_SEL_TPID9200 \
+ (UINT32_C(0x3) << 12)
+ /* 0x9300 */
+ #define RX_PKT_V2_CMPL_METADATA1_TPID_SEL_TPID9300 \
+ (UINT32_C(0x4) << 12)
+ /* Value programmed in CFA VLANTPID register. */
+ #define RX_PKT_V2_CMPL_METADATA1_TPID_SEL_TPIDCFG \
+ (UINT32_C(0x5) << 12)
+ #define RX_PKT_V2_CMPL_METADATA1_TPID_SEL_LAST \
+ RX_PKT_V2_CMPL_METADATA1_TPID_SEL_TPIDCFG
+ /* When meta_format != 0, this value is the VLAN valid. */
+ #define RX_PKT_V2_CMPL_METADATA1_VALID UINT32_C(0x8000)
+ /*
+ * This value is the RSS hash value calculated for the packet
+ * based on the mode bits and key value in the VNIC. When vee_cmpl_mode
+ * is set in VNIC context, this is the lower 32b of the host address
+ * from the first BD used to place the packet.
+ */
+ uint32_t rss_hash;
+} __rte_packed;
+
+/* Last 16 bytes of RX Packet V2 Completion Record */
+/* rx_pkt_v2_cmpl_hi (size:128b/16B) */
+struct rx_pkt_v2_cmpl_hi {
+ uint32_t flags2;
+ /*
+ * When this bit is '0', the cs_ok field has the following definition:-
+ * ip_cs_ok[2:0] = The number of header groups with a valid IP checksum
+ * in the delivered packet, counted from the outer-most header group to
+ * the inner-most header group, stopping at the first error. -
+ * l4_cs_ok[5:3] = The number of header groups with a valid L4 checksum
+ * in the delivered packet, counted from the outer-most header group to
+ * the inner-most header group, stopping at the first error. When this
+ * bit is '1', the cs_ok field has the following definition: -
+ * hdr_cnt[2:0] = The number of header groups that were parsed by the
+ * chip and passed in the delivered packet. - ip_cs_all_ok[3] =This bit
+ * will be '1' if all the parsed header groups with an IP checksum are
+ * valid. - l4_cs_all_ok[4] = This bit will be '1' if all the parsed
+ * header groups with an L4 checksum are valid.
+ */
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_CS_ALL_OK_MODE \
+ UINT32_C(0x8)
+ /* This value indicates what format the metadata field is. */
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_MASK \
+ UINT32_C(0xf0)
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_SFT 4
+ /* There is no metadata information. Values are zero. */
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_NONE \
+ (UINT32_C(0x0) << 4)
+ /*
+ * The {metadata1, metadata0} fields contain the vtag
+ * information: - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0],
+ * de, vid[11:0]} The metadata2 field contains the table scope
+ * and action record pointer. - metadata2[25:0] contains the
+ * action record pointer. - metadata2[31:26] contains the table
+ * scope.
+ */
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_ACT_REC_PTR \
+ (UINT32_C(0x1) << 4)
+ /*
+ * The {metadata1, metadata0} fields contain the vtag
+ * information:
+ * - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0], de, vid[11:0]}
+ * The metadata2 field contains the Tunnel ID
+ * value, justified to LSB. i
+ * - VXLAN = VNI[23:0] -> VXLAN Network ID
+ * - Geneve (NGE) = VNI[23:0] a-> Virtual Network Identifier
+ * - NVGRE = TNI[23:0] -> Tenant Network ID
+ * - GRE = KEY[31:0] -> key field with bit mask. zero if K=0
+ * - IPv4 = 0 (not populated)
+ * - IPv6 = Flow Label[19:0]
+ * - PPPoE = sessionID[15:0]
+ * - MPLs = Outer label[19:0]
+ * - UPAR = Selected[31:0] with bit mask
+ */
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_TUNNEL_ID \
+ (UINT32_C(0x2) << 4)
+ /*
+ * The {metadata1, metadata0} fields contain the vtag
+ * information:
+ * - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0],de, vid[11:0]}
+ * The metadata2 field contains the 32b metadata from the prepended
+ * header (chdr_data).
+ */
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_CHDR_DATA \
+ (UINT32_C(0x3) << 4)
+ /*
+ * The {metadata1, metadata0} fields contain the vtag
+ * information:
+ * - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0], de, vid[11:0]}
+ * The metadata2 field contains the outer_l3_offset,
+ * inner_l2_offset, inner_l3_offset, and inner_l4_size.
+ * - metadata2[8:0] contains the outer_l3_offset.
+ * - metadata2[17:9] contains the inner_l2_offset.
+ * - metadata2[26:18] contains the inner_l3_offset.
+ * - metadata2[31:27] contains the inner_l4_size.
+ */
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_HDR_OFFSET \
+ (UINT32_C(0x4) << 4)
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_LAST \
+ RX_PKT_V2_CMPL_HI_FLAGS2_META_FORMAT_HDR_OFFSET
+ /*
+ * This field indicates the IP type for the inner-most IP header.
+ * A value of '0' indicates IPv4. A value of '1' indicates IPv6.
+ * This value is only valid if itype indicates a packet
+ * with an IP header.
+ */
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_IP_TYPE \
+ UINT32_C(0x100)
+ /*
+ * This indicates that the complete 1's complement checksum was
+ * calculated for the packet.
+ */
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_COMPLETE_CHECKSUM_CALC \
+ UINT32_C(0x200)
+ /*
+ * This field indicates the status of IP and L4 CS calculations done
+ * by the chip. The format of this field is indicated by the
+ * cs_all_ok_mode bit.
+ */
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_CS_OK_MASK \
+ UINT32_C(0xfc00)
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_CS_OK_SFT 10
+ /*
+ * This value is the complete 1's complement checksum calculated from
+ * the start of the outer L3 header to the end of the packet (not
+ * including the ethernet crc). It is valid when the
+ * 'complete_checksum_calc' flag is set.
+ */
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_COMPLETE_CHECKSUM_MASK \
+ UINT32_C(0xffff0000)
+ #define RX_PKT_V2_CMPL_HI_FLAGS2_COMPLETE_CHECKSUM_SFT 16
+ /*
+ * This is data from the CFA block as indicated by the meta_format
+ * field.
+ * - meta_format 0 - none - metadata2 = 0 - not valid/not stripped
+ * - meta_format 1 - act_rec_ptr - metadata2 = {table_scope[5:0],
+ * act_rec_ptr[25:0]}
+ * - meta_format 2 - tunnel_id - metadata2 = tunnel_id[31:0]
+ * - meta_format 3 - chdr_data - metadata2 = updated_chdr_data[31:0]
+ * - meta_format 4 - hdr_offsets - metadata2 = hdr_offsets[31:0]
+ * When vee_cmpl_mode is set in VNIC context, this is the upper 32b
+ * of the host address from the first BD used to place the packet.
+ */
+ uint32_t metadata2;
+ uint16_t errors_v2;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define RX_PKT_V2_CMPL_HI_V2 \
+ UINT32_C(0x1)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_MASK \
+ UINT32_C(0xfffe)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_SFT 1
+ /*
+ * This error indicates that there was some sort of problem with
+ * the BDs for the packet that was found after part of the
+ * packet was already placed. The packet should be treated as
+ * invalid.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_MASK \
+ UINT32_C(0xe)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_SFT 1
+ /* No buffer error */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_NO_BUFFER \
+ (UINT32_C(0x0) << 1)
+ /*
+ * Did Not Fit: Packet did not fit into packet buffer provided.
+ * For regular placement, this means the packet did not fit in
+ * the buffer provided. For HDS and jumbo placement, this means
+ * that the packet could not be placed into 8 physical buffers
+ * (if fixed-size buffers are used), or that the packet could
+ * not be placed in the number of physical buffers configured
+ * for the VNIC (if variable-size buffers are used)
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_DID_NOT_FIT \
+ (UINT32_C(0x1) << 1)
+ /*
+ * Not On Chip: All BDs needed for the packet were not on-chip
+ * when the packet arrived. For regular placement, this error is
+ * not valid. For HDS and jumbo placement, this means that not
+ * enough agg BDs were posted to place the packet.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \
+ (UINT32_C(0x2) << 1)
+ /*
+ * Bad Format:
+ * BDs were not formatted correctly.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_BAD_FORMAT \
+ (UINT32_C(0x3) << 1)
+ /*
+ * Flush:
+ * There was a bad_format error on the previous operation
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_FLUSH \
+ (UINT32_C(0x5) << 1)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_LAST \
+ RX_PKT_V2_CMPL_HI_ERRORS_BUFFER_ERROR_FLUSH
+ /*
+ * This indicates that there was an error in the outer tunnel
+ * portion of the packet when this field is non-zero.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_MASK \
+ UINT32_C(0x70)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_SFT 4
+ /*
+ * No additional error occurred on the outer tunnel portion
+ * of the packet or the packet does not have a outer tunnel.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_NO_ERROR \
+ (UINT32_C(0x0) << 4)
+ /*
+ * Indicates that IP header version does not match expectation
+ * from L2 Ethertype for IPv4 and IPv6 in the outer tunnel header.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_L3_BAD_VERSION \
+ (UINT32_C(0x1) << 4)
+ /*
+ * Indicates that header length is out of range in the outer
+ * tunnel header. Valid for IPv4.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_L3_BAD_HDR_LEN \
+ (UINT32_C(0x2) << 4)
+ /*
+ * Indicates that physical packet is shorter than that claimed
+ * by the outer tunnel l3 header length. Valid for IPv4, or
+ * IPv6 outer tunnel packets.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_IP_TOTAL_ERROR \
+ (UINT32_C(0x3) << 4)
+ /*
+ * Indicates that the physical packet is shorter than that
+ * claimed by the outer tunnel UDP header length for a outer
+ * tunnel UDP packet that is not fragmented.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_UDP_TOTAL_ERROR \
+ (UINT32_C(0x4) << 4)
+ /*
+ * Indicates that the IPv4 TTL or IPv6 hop limit check have
+ * failed (e.g. TTL = 0) in the outer tunnel header. Valid for
+ * IPv4, and IPv6.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_L3_BAD_TTL \
+ (UINT32_C(0x5) << 4)
+ /*
+ * Indicates that the IP checksum failed its check in the outer
+ * tunnel header.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_IP_CS_ERROR \
+ (UINT32_C(0x6) << 4)
+ /*
+ * Indicates that the L4 checksum failed its check in the outer
+ * tunnel header.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_L4_CS_ERROR \
+ (UINT32_C(0x7) << 4)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_LAST \
+ RX_PKT_V2_CMPL_HI_ERRORS_OT_PKT_ERROR_OT_L4_CS_ERROR
+ /*
+ * This indicates that there was a CRC error on either an FCoE
+ * or RoCE packet. The itype indicates the packet type.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_CRC_ERROR \
+ UINT32_C(0x100)
+ /*
+ * This indicates that there was an error in the tunnel portion
+ * of the packet when this field is non-zero.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_MASK \
+ UINT32_C(0xe00)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_SFT 9
+ /*
+ * No additional error occurred on the tunnel portion
+ * of the packet or the packet does not have a tunnel.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_NO_ERROR \
+ (UINT32_C(0x0) << 9)
+ /*
+ * Indicates that IP header version does not match expectation
+ * from L2 Ethertype for IPv4 and IPv6 in the tunnel header.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_L3_BAD_VERSION \
+ (UINT32_C(0x1) << 9)
+ /*
+ * Indicates that header length is out of range in the tunnel
+ * header. Valid for IPv4.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_L3_BAD_HDR_LEN \
+ (UINT32_C(0x2) << 9)
+ /*
+ * Indicates that physical packet is shorter than that claimed
+ * by the tunnel l3 header length. Valid for IPv4, or IPv6 tunnel
+ * packet packets.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_IP_TOTAL_ERROR \
+ (UINT32_C(0x3) << 9)
+ /*
+ * Indicates that the physical packet is shorter than that claimed
+ * by the tunnel UDP header length for a tunnel UDP packet that is
+ * not fragmented.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_UDP_TOTAL_ERROR \
+ (UINT32_C(0x4) << 9)
+ /*
+ * Indicates that the IPv4 TTL or IPv6 hop limit check have failed
+ * (e.g. TTL = 0) in the tunnel header. Valid for IPv4, and IPv6.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_L3_BAD_TTL \
+ (UINT32_C(0x5) << 9)
+ /*
+ * Indicates that the IP checksum failed its check in the tunnel
+ * header.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_IP_CS_ERROR \
+ (UINT32_C(0x6) << 9)
+ /*
+ * Indicates that the L4 checksum failed its check in the tunnel
+ * header.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_L4_CS_ERROR \
+ (UINT32_C(0x7) << 9)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_LAST \
+ RX_PKT_V2_CMPL_HI_ERRORS_T_PKT_ERROR_T_L4_CS_ERROR
+ /*
+ * This indicates that there was an error in the inner
+ * portion of the packet when this
+ * field is non-zero.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_MASK \
+ UINT32_C(0xf000)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_SFT 12
+ /*
+ * No additional error occurred on the tunnel portion
+ * or the packet of the packet does not have a tunnel.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_NO_ERROR \
+ (UINT32_C(0x0) << 12)
+ /*
+ * Indicates that IP header version does not match
+ * expectation from L2 Ethertype for IPv4 and IPv6 or that
+ * option other than VFT was parsed on
+ * FCoE packet.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L3_BAD_VERSION \
+ (UINT32_C(0x1) << 12)
+ /*
+ * indicates that header length is out of range. Valid for
+ * IPv4 and RoCE
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L3_BAD_HDR_LEN \
+ (UINT32_C(0x2) << 12)
+ /*
+ * indicates that the IPv4 TTL or IPv6 hop limit check
+ * have failed (e.g. TTL = 0). Valid for IPv4, and IPv6
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L3_BAD_TTL \
+ (UINT32_C(0x3) << 12)
+ /*
+ * Indicates that physical packet is shorter than that
+ * claimed by the l3 header length. Valid for IPv4,
+ * IPv6 packet or RoCE packets.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_IP_TOTAL_ERROR \
+ (UINT32_C(0x4) << 12)
+ /*
+ * Indicates that the physical packet is shorter than that
+ * claimed by the UDP header length for a UDP packet that is
+ * not fragmented.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_UDP_TOTAL_ERROR \
+ (UINT32_C(0x5) << 12)
+ /*
+ * Indicates that TCP header length > IP payload. Valid for
+ * TCP packets only.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN \
+ (UINT32_C(0x6) << 12)
+ /* Indicates that TCP header length < 5. Valid for TCP. */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN_TOO_SMALL \
+ (UINT32_C(0x7) << 12)
+ /*
+ * Indicates that TCP option headers result in a TCP header
+ * size that does not match data offset in TCP header. Valid
+ * for TCP.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L4_BAD_OPT_LEN \
+ (UINT32_C(0x8) << 12)
+ /*
+ * Indicates that the IP checksum failed its check in the
+ * inner header.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_IP_CS_ERROR \
+ (UINT32_C(0x9) << 12)
+ /*
+ * Indicates that the L4 checksum failed its check in the
+ * inner header.
+ */
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L4_CS_ERROR \
+ (UINT32_C(0xa) << 12)
+ #define RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_LAST \
+ RX_PKT_V2_CMPL_HI_ERRORS_PKT_ERROR_L4_CS_ERROR
+ /*
+ * This is data from the CFA block as indicated by the meta_format
+ * field.
+ */
+ uint16_t metadata0;
+ /* When meta_format=1, this value is the VLAN VID. */
+ #define RX_PKT_V2_CMPL_HI_METADATA0_VID_MASK UINT32_C(0xfff)
+ #define RX_PKT_V2_CMPL_HI_METADATA0_VID_SFT 0
+ /* When meta_format=1, this value is the VLAN DE. */
+ #define RX_PKT_V2_CMPL_HI_METADATA0_DE UINT32_C(0x1000)
+ /* When meta_format=1, this value is the VLAN PRI. */
+ #define RX_PKT_V2_CMPL_HI_METADATA0_PRI_MASK UINT32_C(0xe000)
+ #define RX_PKT_V2_CMPL_HI_METADATA0_PRI_SFT 13
+ /*
+ * The timestamp field contains the 32b timestamp for the packet from
+ * the MAC.
+ */
+ uint32_t timestamp;
+} __rte_packed;
+
+/*
+ * This TPA completion structure is used on devices where the
+ * `hwrm_vnic_qcaps.max_aggs_supported` value is 0.
+ */
+/* rx_tpa_start_cmpl (size:128b/16B) */
+struct rx_tpa_start_cmpl {
+ uint16_t flags_type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define RX_TPA_START_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define RX_TPA_START_CMPL_TYPE_SFT 0
+ /*
+ * RX L2 TPA Start Completion:
+ * Completion at the beginning of a TPA operation.
+ * Length = 32B
+ */
+ #define RX_TPA_START_CMPL_TYPE_RX_TPA_START UINT32_C(0x13)
+ #define RX_TPA_START_CMPL_TYPE_LAST \
+ RX_TPA_START_CMPL_TYPE_RX_TPA_START
+ #define RX_TPA_START_CMPL_FLAGS_MASK UINT32_C(0xffc0)
+ #define RX_TPA_START_CMPL_FLAGS_SFT 6
+ /* This bit will always be '0' for TPA start completions. */
+ #define RX_TPA_START_CMPL_FLAGS_ERROR UINT32_C(0x40)
+ /* This field indicates how the packet was placed in the buffer. */
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380)
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_SFT 7
+ /*
+ * Jumbo:
+ * TPA Packet was placed using jumbo algorithm. This means
+ * that the first buffer will be filled with data before
+ * moving to aggregation buffers. Each aggregation buffer
+ * will be filled before moving to the next aggregation
+ * buffer.
+ */
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_JUMBO \
+ (UINT32_C(0x1) << 7)
+ /*
+ * Header/Data Separation:
+ * Packet was placed using Header/Data separation algorithm.
+ * The separation location is indicated by the itype field.
+ */
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_HDS \
+ (UINT32_C(0x2) << 7)
+ /*
+ * GRO/Jumbo:
+ * Packet will be placed using GRO/Jumbo where the first
+ * packet is filled with data. Subsequent packets will be
+ * placed such that any one packet does not span two
+ * aggregation buffers unless it starts at the beginning of
+ * an aggregation buffer.
+ */
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \
+ (UINT32_C(0x5) << 7)
+ /*
+ * GRO/Header-Data Separation:
+ * Packet will be placed using GRO/HDS where the header
+ * is in the first packet.
+ * Payload of each packet will be
+ * placed such that any one packet does not span two
+ * aggregation buffers unless it starts at the beginning of
+ * an aggregation buffer.
+ */
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_HDS \
+ (UINT32_C(0x6) << 7)
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_LAST \
+ RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_HDS
+ /* This bit is '1' if the RSS field in this completion is valid. */
+ #define RX_TPA_START_CMPL_FLAGS_RSS_VALID UINT32_C(0x400)
+ /* unused is 1 b */
+ #define RX_TPA_START_CMPL_FLAGS_UNUSED UINT32_C(0x800)
+ /*
+ * This value indicates what the inner packet determined for the
+ * packet was.
+ */
+ #define RX_TPA_START_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000)
+ #define RX_TPA_START_CMPL_FLAGS_ITYPE_SFT 12
+ /*
+ * TCP Packet:
+ * Indicates that the packet was IP and TCP.
+ */
+ #define RX_TPA_START_CMPL_FLAGS_ITYPE_TCP \
+ (UINT32_C(0x2) << 12)
+ #define RX_TPA_START_CMPL_FLAGS_ITYPE_LAST \
+ RX_TPA_START_CMPL_FLAGS_ITYPE_TCP
+ /*
+ * This value indicates the amount of packet data written to the
+ * buffer the opaque field in this completion corresponds to.
+ */
+ uint16_t len;
+ /*
+ * This is a copy of the opaque field from the RX BD this completion
+ * corresponds to.
+ */
+ uint32_t opaque;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ uint8_t v1;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define RX_TPA_START_CMPL_V1 UINT32_C(0x1)
+ #define RX_TPA_START_CMPL_LAST RX_TPA_START_CMPL_V1
+ /*
+ * This is the RSS hash type for the packet. The value is packed
+ * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}.
+ *
+ * The value of tuple_extrac_op provides the information about
+ * what fields the hash was computed on.
+ * * 0: The RSS hash was computed over source IP address,
+ * destination IP address, source port, and destination port of inner
+ * IP and TCP or UDP headers. Note: For non-tunneled packets,
+ * the packet headers are considered inner packet headers for the RSS
+ * hash computation purpose.
+ * * 1: The RSS hash was computed over source IP address and destination
+ * IP address of inner IP header. Note: For non-tunneled packets,
+ * the packet headers are considered inner packet headers for the RSS
+ * hash computation purpose.
+ * * 2: The RSS hash was computed over source IP address,
+ * destination IP address, source port, and destination port of
+ * IP and TCP or UDP headers of outer tunnel headers.
+ * Note: For non-tunneled packets, this value is not applicable.
+ * * 3: The RSS hash was computed over source IP address and
+ * destination IP address of IP header of outer tunnel headers.
+ * Note: For non-tunneled packets, this value is not applicable.
+ *
+ * Note that 4-tuples values listed above are applicable
+ * for layer 4 protocols supported and enabled for RSS in the hardware,
+ * HWRM firmware, and drivers. For example, if RSS hash is supported and
+ * enabled for TCP traffic only, then the values of tuple_extract_op
+ * corresponding to 4-tuples are only valid for TCP traffic.
+ */
+ uint8_t rss_hash_type;
+ /*
+ * This is the aggregation ID that the completion is associated
+ * with. Use this number to correlate the TPA start completion
+ * with the TPA end completion.
+ */
+ uint16_t agg_id;
+ /* unused2 is 9 b */
+ #define RX_TPA_START_CMPL_UNUSED2_MASK UINT32_C(0x1ff)
+ #define RX_TPA_START_CMPL_UNUSED2_SFT 0
+ /*
+ * This is the aggregation ID that the completion is associated
+ * with. Use this number to correlate the TPA start completion
+ * with the TPA end completion.
+ */
+ #define RX_TPA_START_CMPL_AGG_ID_MASK UINT32_C(0xfe00)
+ #define RX_TPA_START_CMPL_AGG_ID_SFT 9
+ /*
+ * This value is the RSS hash value calculated for the packet
+ * based on the mode bits and key value in the VNIC.
+ */
+ uint32_t rss_hash;
+} __rte_packed;
+
+/*
+ * Last 16 bytes of rx_tpa_start_cmpl.
+ *
+ * This TPA completion structure is used on devices where the
+ * `hwrm_vnic_qcaps.max_aggs_supported` value is 0.
+ */
+/* rx_tpa_start_cmpl_hi (size:128b/16B) */
+struct rx_tpa_start_cmpl_hi {
+ uint32_t flags2;
+ /*
+ * This indicates that the ip checksum was calculated for the
+ * inner packet and that the sum passed for all segments
+ * included in the aggregation.
+ */
+ #define RX_TPA_START_CMPL_FLAGS2_IP_CS_CALC UINT32_C(0x1)
+ /*
+ * This indicates that the TCP, UDP or ICMP checksum was
+ * calculated for the inner packet and that the sum passed
+ * for all segments included in the aggregation.
+ */
+ #define RX_TPA_START_CMPL_FLAGS2_L4_CS_CALC UINT32_C(0x2)
+ /*
+ * This indicates that the ip checksum was calculated for the
+ * tunnel header and that the sum passed for all segments
+ * included in the aggregation.
+ */
+ #define RX_TPA_START_CMPL_FLAGS2_T_IP_CS_CALC UINT32_C(0x4)
+ /*
+ * This indicates that the UDP checksum was
+ * calculated for the tunnel packet and that the sum passed for
+ * all segments included in the aggregation.
+ */
+ #define RX_TPA_START_CMPL_FLAGS2_T_L4_CS_CALC UINT32_C(0x8)
+ /* This value indicates what format the metadata field is. */
+ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0)
+ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_SFT 4
+ /* No metadata information. Value is zero. */
+ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_NONE \
+ (UINT32_C(0x0) << 4)
+ /*
+ * The metadata field contains the VLAN tag and TPID value.
+ * - metadata[11:0] contains the vlan VID value.
+ * - metadata[12] contains the vlan DE value.
+ * - metadata[15:13] contains the vlan PRI value.
+ * - metadata[31:16] contains the vlan TPID value.
+ */
+ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN \
+ (UINT32_C(0x1) << 4)
+ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_LAST \
+ RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN
+ /*
+ * This field indicates the IP type for the inner-most IP header.
+ * A value of '0' indicates IPv4. A value of '1' indicates IPv6.
+ */
+ #define RX_TPA_START_CMPL_FLAGS2_IP_TYPE UINT32_C(0x100)
+ /*
+ * This is data from the CFA block as indicated by the meta_format
+ * field.
+ */
+ uint32_t metadata;
+ /* When meta_format=1, this value is the VLAN VID. */
+ #define RX_TPA_START_CMPL_METADATA_VID_MASK UINT32_C(0xfff)
+ #define RX_TPA_START_CMPL_METADATA_VID_SFT 0
+ /* When meta_format=1, this value is the VLAN DE. */
+ #define RX_TPA_START_CMPL_METADATA_DE UINT32_C(0x1000)
+ /* When meta_format=1, this value is the VLAN PRI. */
+ #define RX_TPA_START_CMPL_METADATA_PRI_MASK UINT32_C(0xe000)
+ #define RX_TPA_START_CMPL_METADATA_PRI_SFT 13
+ /* When meta_format=1, this value is the VLAN TPID. */
+ #define RX_TPA_START_CMPL_METADATA_TPID_MASK UINT32_C(0xffff0000)
+ #define RX_TPA_START_CMPL_METADATA_TPID_SFT 16
+ uint16_t v2;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define RX_TPA_START_CMPL_V2 UINT32_C(0x1)
+ /*
+ * This field identifies the CFA action rule that was used for this
+ * packet.
+ */
+ uint16_t cfa_code;
+ /*
+ * This is the size in bytes of the inner most L4 header.
+ * This can be subtracted from the payload_offset to determine
+ * the start of the inner most L4 header.
+ */
+ uint32_t inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset;
+ /*
+ * This is the offset from the beginning of the packet in bytes for
+ * the outer L3 header. If there is no outer L3 header, then this
+ * value is zero.
+ */
+ #define RX_TPA_START_CMPL_OUTER_L3_OFFSET_MASK UINT32_C(0x1ff)
+ #define RX_TPA_START_CMPL_OUTER_L3_OFFSET_SFT 0
+ /*
+ * This is the offset from the beginning of the packet in bytes for
+ * the inner most L2 header.
+ */
+ #define RX_TPA_START_CMPL_INNER_L2_OFFSET_MASK UINT32_C(0x3fe00)
+ #define RX_TPA_START_CMPL_INNER_L2_OFFSET_SFT 9
+ /*
+ * This is the offset from the beginning of the packet in bytes for
+ * the inner most L3 header.
+ */
+ #define RX_TPA_START_CMPL_INNER_L3_OFFSET_MASK UINT32_C(0x7fc0000)
+ #define RX_TPA_START_CMPL_INNER_L3_OFFSET_SFT 18
+ /*
+ * This is the size in bytes of the inner most L4 header.
+ * This can be subtracted from the payload_offset to determine
+ * the start of the inner most L4 header.
+ */
+ #define RX_TPA_START_CMPL_INNER_L4_SIZE_MASK UINT32_C(0xf8000000)
+ #define RX_TPA_START_CMPL_INNER_L4_SIZE_SFT 27
+} __rte_packed;
+
+/*
+ * This TPA completion structure is used on devices where the
+ * `hwrm_vnic_qcaps.max_aggs_supported` value is 0.
+ * RX L2 TPA Start V2 Completion Record (32 bytes split to 2 16-byte
+ * struct)
+ */
+/* rx_tpa_start_v2_cmpl (size:128b/16B) */
+struct rx_tpa_start_v2_cmpl {
+ uint16_t flags_type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define RX_TPA_START_V2_CMPL_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define RX_TPA_START_V2_CMPL_TYPE_SFT 0
+ /*
+ * RX L2 TPA Start V2 Completion:
+ * Completion at the beginning of a TPA operation.
+ * Length = 32B
+ * This is the new version of the RX_TPA_START completion used
+ * in SR2 and later chips.
+ */
+ #define RX_TPA_START_V2_CMPL_TYPE_RX_TPA_START_V2 \
+ UINT32_C(0xd)
+ #define RX_TPA_START_V2_CMPL_TYPE_LAST \
+ RX_TPA_START_V2_CMPL_TYPE_RX_TPA_START_V2
+ #define RX_TPA_START_V2_CMPL_FLAGS_MASK \
+ UINT32_C(0xffc0)
+ #define RX_TPA_START_V2_CMPL_FLAGS_SFT 6
+ /*
+ * When this bit is '1', it indicates a packet that has an error
+ * of some type. Type of error is indicated in error_flags.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS_ERROR \
+ UINT32_C(0x40)
+ /* This field indicates how the packet was placed in the buffer. */
+ #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_MASK \
+ UINT32_C(0x380)
+ #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_SFT 7
+ /*
+ * Jumbo:
+ * TPA Packet was placed using jumbo algorithm. This means
+ * that the first buffer will be filled with data before
+ * moving to aggregation buffers. Each aggregation buffer
+ * will be filled before moving to the next aggregation
+ * buffer.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_JUMBO \
+ (UINT32_C(0x1) << 7)
+ /*
+ * Header/Data Separation:
+ * Packet was placed using Header/Data separation algorithm.
+ * The separation location is indicated by the itype field.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_HDS \
+ (UINT32_C(0x2) << 7)
+ /*
+ * IOC/Jumbo:
+ * Packet will be placed using In-Order Completion/Jumbo where
+ * the first packet of the aggregation is placed using Jumbo
+ * Placement. Subsequent packets will be placed such that each
+ * packet starts at the beginning of an aggregation buffer.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_IOC_JUMBO \
+ (UINT32_C(0x4) << 7)
+ /*
+ * GRO/Jumbo:
+ * Packet will be placed using GRO/Jumbo where the first
+ * packet is filled with data. Subsequent packets will be
+ * placed such that any one packet does not span two
+ * aggregation buffers unless it starts at the beginning of
+ * an aggregation buffer.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \
+ (UINT32_C(0x5) << 7)
+ /*
+ * GRO/Header-Data Separation:
+ * Packet will be placed using GRO/HDS where the header
+ * is in the first packet.
+ * Payload of each packet will be
+ * placed such that any one packet does not span two
+ * aggregation buffers unless it starts at the beginning of
+ * an aggregation buffer.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_GRO_HDS \
+ (UINT32_C(0x6) << 7)
+ /*
+ * IOC/Header-Data Separation:
+ * Packet will be placed using In-Order Completion/HDS where
+ * the header is in the first packet buffer. Payload of each
+ * packet will be placed such that each packet starts at the
+ * beginning of an aggregation buffer.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_IOC_HDS \
+ (UINT32_C(0x7) << 7)
+ #define RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_LAST \
+ RX_TPA_START_V2_CMPL_FLAGS_PLACEMENT_IOC_HDS
+ /* This bit is '1' if the RSS field in this completion is valid. */
+ #define RX_TPA_START_V2_CMPL_FLAGS_RSS_VALID \
+ UINT32_C(0x400)
+ /*
+ * This bit is '1' if metadata has been added to the end of the
+ * packet in host memory. Metadata starts at the first 32B boundary
+ * after the end of the packet for regular and jumbo placement. It
+ * starts at the first 32B boundary after the end of the header for
+ * HDS placement. The length of the metadata is indicated in the
+ * metadata itself.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS_PKT_METADATA_PRESENT \
+ UINT32_C(0x800)
+ /*
+ * This value indicates what the inner packet determined for the
+ * packet was.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS_ITYPE_MASK \
+ UINT32_C(0xf000)
+ #define RX_TPA_START_V2_CMPL_FLAGS_ITYPE_SFT 12
+ /*
+ * TCP Packet:
+ * Indicates that the packet was IP and TCP.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS_ITYPE_TCP \
+ (UINT32_C(0x2) << 12)
+ #define RX_TPA_START_V2_CMPL_FLAGS_ITYPE_LAST \
+ RX_TPA_START_V2_CMPL_FLAGS_ITYPE_TCP
+ /*
+ * This value indicates the amount of packet data written to the
+ * buffer the opaque field in this completion corresponds to.
+ */
+ uint16_t len;
+ /*
+ * This is a copy of the opaque field from the RX BD this completion
+ * corresponds to. If the VNIC is configured to not use an Rx BD for
+ * the TPA Start completion, then this is a copy of the opaque field
+ * from the first BD used to place the TPA Start packet.
+ */
+ uint32_t opaque;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ uint8_t v1;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define RX_TPA_START_V2_CMPL_V1 UINT32_C(0x1)
+ #define RX_TPA_START_V2_CMPL_LAST RX_TPA_START_V2_CMPL_V1
+ /*
+ * This is the RSS hash type for the packet. The value is packed
+ * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}.
+ *
+ * The value of tuple_extrac_op provides the information about
+ * what fields the hash was computed on.
+ * * 0: The RSS hash was computed over source IP address,
+ * destination IP address, source port, and destination port of inner
+ * IP and TCP or UDP headers. Note: For non-tunneled packets,
+ * the packet headers are considered inner packet headers for the RSS
+ * hash computation purpose.
+ * * 1: The RSS hash was computed over source IP address and destination
+ * IP address of inner IP header. Note: For non-tunneled packets,
+ * the packet headers are considered inner packet headers for the RSS
+ * hash computation purpose.
+ * * 2: The RSS hash was computed over source IP address,
+ * destination IP address, source port, and destination port of
+ * IP and TCP or UDP headers of outer tunnel headers.
+ * Note: For non-tunneled packets, this value is not applicable.
+ * * 3: The RSS hash was computed over source IP address and
+ * destination IP address of IP header of outer tunnel headers.
+ * Note: For non-tunneled packets, this value is not applicable.
+ *
+ * Note that 4-tuples values listed above are applicable
+ * for layer 4 protocols supported and enabled for RSS in the hardware,
+ * HWRM firmware, and drivers. For example, if RSS hash is supported and
+ * enabled for TCP traffic only, then the values of tuple_extract_op
+ * corresponding to 4-tuples are only valid for TCP traffic.
+ */
+ uint8_t rss_hash_type;
+ /*
+ * This is the aggregation ID that the completion is associated
+ * with. Use this number to correlate the TPA start completion
+ * with the TPA end completion.
+ */
+ uint16_t agg_id;
+ /*
+ * This is the aggregation ID that the completion is associated
+ * with. Use this number to correlate the TPA start completion
+ * with the TPA end completion.
+ */
+ #define RX_TPA_START_V2_CMPL_AGG_ID_MASK UINT32_C(0xfff)
+ #define RX_TPA_START_V2_CMPL_AGG_ID_SFT 0
+ #define RX_TPA_START_V2_CMPL_METADATA1_MASK \
+ UINT32_C(0xf000)
+ #define RX_TPA_START_V2_CMPL_METADATA1_SFT 12
+ /* When meta_format != 0, this value is the VLAN TPID_SEL. */
+ #define RX_TPA_START_V2_CMPL_METADATA1_TPID_SEL_MASK \
+ UINT32_C(0x7000)
+ #define RX_TPA_START_V2_CMPL_METADATA1_TPID_SEL_SFT 12
+ /* 0x88a8 */
+ #define RX_TPA_START_V2_CMPL_METADATA1_TPID_SEL_TPID88A8 \
+ (UINT32_C(0x0) << 12)
+ /* 0x8100 */
+ #define RX_TPA_START_V2_CMPL_METADATA1_TPID_SEL_TPID8100 \
+ (UINT32_C(0x1) << 12)
+ /* 0x9100 */
+ #define RX_TPA_START_V2_CMPL_METADATA1_TPID_SEL_TPID9100 \
+ (UINT32_C(0x2) << 12)
+ /* 0x9200 */
+ #define RX_TPA_START_V2_CMPL_METADATA1_TPID_SEL_TPID9200 \
+ (UINT32_C(0x3) << 12)
+ /* 0x9300 */
+ #define RX_TPA_START_V2_CMPL_METADATA1_TPID_SEL_TPID9300 \
+ (UINT32_C(0x4) << 12)
+ /* Value programmed in CFA VLANTPID register. */
+ #define RX_TPA_START_V2_CMPL_METADATA1_TPID_SEL_TPIDCFG \
+ (UINT32_C(0x5) << 12)
+ #define RX_TPA_START_V2_CMPL_METADATA1_TPID_SEL_LAST \
+ RX_TPA_START_V2_CMPL_METADATA1_TPID_SEL_TPIDCFG
+ /* When meta_format != 0, this value is the VLAN valid. */
+ #define RX_TPA_START_V2_CMPL_METADATA1_VALID \
+ UINT32_C(0x8000)
+ /*
+ * This value is the RSS hash value calculated for the packet
+ * based on the mode bits and key value in the VNIC.
+ * When vee_cmpl_mode is set in VNIC context, this is the lower
+ * 32b of the host address from the first BD used to place the packet.
+ */
+ uint32_t rss_hash;
+} __rte_packed;
+
+/*
+ * Last 16 bytes of RX L2 TPA Start V2 Completion Record
+ *
+ * This TPA completion structure is used on devices where the
+ * `hwrm_vnic_qcaps.max_aggs_supported` value is 0.
+ */
+/* rx_tpa_start_v2_cmpl_hi (size:128b/16B) */
+struct rx_tpa_start_v2_cmpl_hi {
+ uint32_t flags2;
+ /* This indicates that the aggregation was done using GRO rules. */
+ #define RX_TPA_START_V2_CMPL_FLAGS2_AGG_GRO \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '0', the cs_ok field has the following definition:-
+ * ip_cs_ok[2:0] = The number of header groups with a valid IP checksum
+ * in the delivered packet, counted from the outer-most header group to
+ * the inner-most header group, stopping at the first error. -
+ * l4_cs_ok[5:3] = The number of header groups with a valid L4 checksum
+ * in the delivered packet, counted from the outer-most header group to
+ * the inner-most header group, stopping at the first error. When this
+ * bit is '1', the cs_ok field has the following definition: -
+ * hdr_cnt[2:0] = The number of header groups that were parsed by the
+ * chip and passed in the delivered packet. - ip_cs_all_ok[3] =This bit
+ * will be '1' if all the parsed header groups with an IP checksum are
+ * valid. - l4_cs_all_ok[4] = This bit will be '1' if all the parsed
+ * header groups with an L4 checksum are valid.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS2_CS_ALL_OK_MODE \
+ UINT32_C(0x8)
+ /* This value indicates what format the metadata field is. */
+ #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_MASK \
+ UINT32_C(0xf0)
+ #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_SFT 4
+ /* There is no metadata information. Values are zero. */
+ #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_NONE \
+ (UINT32_C(0x0) << 4)
+ /*
+ * The {metadata1, metadata0} fields contain the vtag
+ * information: - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0],
+ * de, vid[11:0]} The metadata2 field contains the table scope
+ * and action record pointer. - metadata2[25:0] contains the
+ * action record pointer. - metadata2[31:26] contains the table
+ * scope.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_ACT_REC_PTR \
+ (UINT32_C(0x1) << 4)
+ /*
+ * The {metadata1, metadata0} fields contain the vtag
+ * information:
+ * - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0], de, vid[11:0]}
+ * The metadata2 field contains the Tunnel ID
+ * value, justified to LSB. i
+ * - VXLAN = VNI[23:0] -> VXLAN Network ID
+ * - Geneve (NGE) = VNI[23:0] a-> Virtual Network Identifier
+ * - NVGRE = TNI[23:0] -> Tenant Network ID
+ * - GRE = KEY[31:0] -> key field with bit mask. zero if K=0
+ * - IPv4 = 0 (not populated)
+ * - IPv6 = Flow Label[19:0]
+ * - PPPoE = sessionID[15:0]
+ * - MPLs = Outer label[19:0]
+ * - UPAR = Selected[31:0] with bit mask
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_TUNNEL_ID \
+ (UINT32_C(0x2) << 4)
+ /*
+ * The {metadata1, metadata0} fields contain the vtag
+ * information:
+ * - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0],de, vid[11:0]}
+ * The metadata2 field contains the 32b metadata from the prepended
+ * header (chdr_data).
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_CHDR_DATA \
+ (UINT32_C(0x3) << 4)
+ /*
+ * The {metadata1, metadata0} fields contain the vtag
+ * information:
+ * - vtag[19:0] = {valid, tpid_sel[2:0], pri[2:0], de, vid[11:0]}
+ * The metadata2 field contains the outer_l3_offset,
+ * inner_l2_offset, inner_l3_offset, and inner_l4_size.
+ * - metadata2[8:0] contains the outer_l3_offset.
+ * - metadata2[17:9] contains the inner_l2_offset.
+ * - metadata2[26:18] contains the inner_l3_offset.
+ * - metadata2[31:27] contains the inner_l4_size.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET \
+ (UINT32_C(0x4) << 4)
+ #define RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_LAST \
+ RX_TPA_START_V2_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET
+ /*
+ * This field indicates the IP type for the inner-most IP header.
+ * A value of '0' indicates IPv4. A value of '1' indicates IPv6.
+ * This value is only valid if itype indicates a packet
+ * with an IP header.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS2_IP_TYPE \
+ UINT32_C(0x100)
+ /*
+ * This indicates that the complete 1's complement checksum was
+ * calculated for the packet in the affregation.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS2_COMPLETE_CHECKSUM_CALC \
+ UINT32_C(0x200)
+ /*
+ * This field indicates the status of IP and L4 CS calculations done
+ * by the chip. The format of this field is indicated by the
+ * cs_all_ok_mode bit.
+ * CS status for TPA packets is always valid. This means that "all_ok"
+ * status will always be set. The ok count status will be set
+ * appropriately for the packet header, such that all existing CS
+ * values are ok.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS2_CS_OK_MASK \
+ UINT32_C(0xfc00)
+ #define RX_TPA_START_V2_CMPL_FLAGS2_CS_OK_SFT 10
+ /*
+ * This value is the complete 1's complement checksum calculated from
+ * the start of the outer L3 header to the end of the packet (not
+ * including the ethernet crc). It is valid when the
+ * 'complete_checksum_calc' flag is set. For TPA Start completions,
+ * the complete checksum is calculated for the first packet in the
+ * aggregation only.
+ */
+ #define RX_TPA_START_V2_CMPL_FLAGS2_COMPLETE_CHECKSUM_MASK \
+ UINT32_C(0xffff0000)
+ #define RX_TPA_START_V2_CMPL_FLAGS2_COMPLETE_CHECKSUM_SFT 16
+ /*
+ * This is data from the CFA block as indicated by the meta_format
+ * field.
+ * - meta_format 0 - none - metadata2 = 0 - not valid/not stripped
+ * - meta_format 1 - act_rec_ptr - metadata2 = {table_scope[5:0],
+ * act_rec_ptr[25:0]}
+ * - meta_format 2 - tunnel_id - metadata2 = tunnel_id[31:0]
+ * - meta_format 3 - chdr_data - metadata2 = updated_chdr_data[31:0]
+ * - meta_format 4 - hdr_offsets - metadata2 = hdr_offsets[31:0]
+ * When vee_cmpl_mode is set in VNIC context, this is the upper 32b
+ * of the host address from the first BD used to place the packet.
+ */
+ uint32_t metadata2;
+ uint16_t errors_v2;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define RX_TPA_START_V2_CMPL_V2 \
+ UINT32_C(0x1)
+ #define RX_TPA_START_V2_CMPL_ERRORS_MASK \
+ UINT32_C(0xfffe)
+ #define RX_TPA_START_V2_CMPL_ERRORS_SFT 1
+ /*
+ * This error indicates that there was some sort of problem with
+ * the BDs for the packetThe packet should be treated as
+ * invalid.
+ */
+ #define RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_MASK \
+ UINT32_C(0xe)
+ #define RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_SFT 1
+ /* No buffer error */
+ #define RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER \
+ (UINT32_C(0x0) << 1)
+ /*
+ * Did Not Fit:
+ * Packet did not fit into packet buffer provided. This means
+ * that the TPA Start packet was too big to be placed into the
+ * per-packet maximum number of physical buffers configured for
+ * the VNIC, or that it was too big to be placed into the
+ * per-aggregation maximum number of physical buffers configured
+ * for the VNIC. This error only occurs when the VNIC is
+ * configured for variable size receive buffers.
+ */
+ #define RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_DID_NOT_FIT \
+ (UINT32_C(0x1) << 1)
+ /*
+ * Bad Format:
+ * BDs were not formatted correctly.
+ */
+ #define RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \
+ (UINT32_C(0x3) << 1)
+ /*
+ * Flush:
+ * There was a bad_format error on the previous operation
+ */
+ #define RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_FLUSH \
+ (UINT32_C(0x5) << 1)
+ #define RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_LAST \
+ RX_TPA_START_V2_CMPL_ERRORS_BUFFER_ERROR_FLUSH
+ /*
+ * This is data from the CFA block as indicated by the meta_format
+ * field.
+ */
+ uint16_t metadata0;
+ /* When meta_format != 0, this value is the VLAN VID. */
+ #define RX_TPA_START_V2_CMPL_METADATA0_VID_MASK UINT32_C(0xfff)
+ #define RX_TPA_START_V2_CMPL_METADATA0_VID_SFT 0
+ /* When meta_format != 0, this value is the VLAN DE. */
+ #define RX_TPA_START_V2_CMPL_METADATA0_DE UINT32_C(0x1000)
+ /* When meta_format != 0, this value is the VLAN PRI. */
+ #define RX_TPA_START_V2_CMPL_METADATA0_PRI_MASK UINT32_C(0xe000)
+ #define RX_TPA_START_V2_CMPL_METADATA0_PRI_SFT 13
+ /*
+ * This field contains the outer_l3_offset, inner_l2_offset,
+ * inner_l3_offset, and inner_l4_size.
+ *
+ * hdr_offsets[8:0] contains the outer_l3_offset.
+ * hdr_offsets[17:9] contains the inner_l2_offset.
+ * hdr_offsets[26:18] contains the inner_l3_offset.
+ * hdr_offsets[31:27] contains the inner_l4_size.
+ */
+ uint32_t hdr_offsets;
+} __rte_packed;
+
+/*
+ * This TPA completion structure is used on devices where the
+ * `hwrm_vnic_qcaps.max_aggs_supported` value is 0.
+ */
+/* rx_tpa_end_cmpl (size:128b/16B) */
+struct rx_tpa_end_cmpl {
+ uint16_t flags_type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define RX_TPA_END_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define RX_TPA_END_CMPL_TYPE_SFT 0
+ /*
+ * RX L2 TPA End Completion:
+ * Completion at the end of a TPA operation.
+ * Length = 32B
+ */
+ #define RX_TPA_END_CMPL_TYPE_RX_TPA_END UINT32_C(0x15)
+ #define RX_TPA_END_CMPL_TYPE_LAST \
+ RX_TPA_END_CMPL_TYPE_RX_TPA_END
+ #define RX_TPA_END_CMPL_FLAGS_MASK UINT32_C(0xffc0)
+ #define RX_TPA_END_CMPL_FLAGS_SFT 6
+ /*
+ * When this bit is '1', it indicates a packet that has an
+ * error of some type. Type of error is indicated in
+ * error_flags.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_ERROR UINT32_C(0x40)
+ /* This field indicates how the packet was placed in the buffer. */
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380)
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_SFT 7
+ /*
+ * Jumbo:
+ * TPA Packet was placed using jumbo algorithm. This means
+ * that the first buffer will be filled with data before
+ * moving to aggregation buffers. Each aggregation buffer
+ * will be filled before moving to the next aggregation
+ * buffer.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_JUMBO \
+ (UINT32_C(0x1) << 7)
+ /*
+ * Header/Data Separation:
+ * Packet was placed using Header/Data separation algorithm.
+ * The separation location is indicated by the itype field.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_HDS \
+ (UINT32_C(0x2) << 7)
+ /*
+ * IOC/Jumbo:
+ * Packet will be placed using In-Order Completion/Jumbo where
+ * the first packet of the aggregation is placed using Jumbo
+ * Placement. Subsequent packets will be placed such that each
+ * packet starts at the beginning of an aggregation buffer.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_IOC_JUMBO \
+ (UINT32_C(0x4) << 7)
+ /*
+ * GRO/Jumbo:
+ * Packet will be placed using GRO/Jumbo where the first
+ * packet is filled with data. Subsequent packets will be
+ * placed such that any one packet does not span two
+ * aggregation buffers unless it starts at the beginning of
+ * an aggregation buffer.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \
+ (UINT32_C(0x5) << 7)
+ /*
+ * GRO/Header-Data Separation:
+ * Packet will be placed using GRO/HDS where the header
+ * is in the first packet.
+ * Payload of each packet will be
+ * placed such that any one packet does not span two
+ * aggregation buffers unless it starts at the beginning of
+ * an aggregation buffer.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_HDS \
+ (UINT32_C(0x6) << 7)
+ /*
+ * IOC/Header-Data Separation:
+ * Packet will be placed using In-Order Completion/HDS where
+ * the header is in the first packet buffer. Payload of each
+ * packet will be placed such that each packet starts at the
+ * beginning of an aggregation buffer.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_IOC_HDS \
+ (UINT32_C(0x7) << 7)
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_LAST \
+ RX_TPA_END_CMPL_FLAGS_PLACEMENT_IOC_HDS
+ /* unused is 1 b */
+ #define RX_TPA_END_CMPL_FLAGS_UNUSED UINT32_C(0x400)
+ /*
+ * This bit is '1' if metadata has been added to the end of the
+ * packet in host memory. Metadata starts at the first 32B boundary
+ * after the end of the packet for regular and jumbo placement.
+ * It starts at the first 32B boundary after the end of the header
+ * for HDS placement. The length of the metadata is indicated in the
+ * metadata itself.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_PKT_METADATA_PRESENT UINT32_C(0x800)
+ /*
+ * This value indicates what the inner packet determined for the
+ * packet was.
+ * - 2 TCP Packet
+ * Indicates that the packet was IP and TCP. This indicates
+ * that the ip_cs field is valid and that the tcp_udp_cs
+ * field is valid and contains the TCP checksum.
+ * This also indicates that the payload_offset field is valid.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_ITYPE_MASK \
+ UINT32_C(0xf000)
+ #define RX_TPA_END_CMPL_FLAGS_ITYPE_SFT 12
+ /*
+ * This value is zero for TPA End completions.
+ * There is no data in the buffer that corresponds to the opaque
+ * value in this completion.
+ */
+ uint16_t len;
+ /*
+ * This is a copy of the opaque field from the RX BD this completion
+ * corresponds to.
+ */
+ uint32_t opaque;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ uint8_t agg_bufs_v1;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define RX_TPA_END_CMPL_V1 UINT32_C(0x1)
+ /*
+ * This value is the number of aggregation buffers that follow this
+ * entry in the completion ring that are a part of this aggregation
+ * packet.
+ * If the value is zero, then the packet is completely contained
+ * in the buffer space provided in the aggregation start completion.
+ */
+ #define RX_TPA_END_CMPL_AGG_BUFS_MASK UINT32_C(0x7e)
+ #define RX_TPA_END_CMPL_AGG_BUFS_SFT 1
+ /* This value is the number of segments in the TPA operation. */
+ uint8_t tpa_segs;
+ /*
+ * This value indicates the offset in bytes from the beginning of the packet
+ * where the inner payload starts. This value is valid for TCP, UDP,
+ * FCoE, and RoCE packets.
+ *
+ * A value of zero indicates an offset of 256 bytes.
+ */
+ uint8_t payload_offset;
+ uint8_t agg_id;
+ /* unused2 is 1 b */
+ #define RX_TPA_END_CMPL_UNUSED2 UINT32_C(0x1)
+ /*
+ * This is the aggregation ID that the completion is associated
+ * with. Use this number to correlate the TPA start completion
+ * with the TPA end completion.
+ */
+ #define RX_TPA_END_CMPL_AGG_ID_MASK UINT32_C(0xfe)
+ #define RX_TPA_END_CMPL_AGG_ID_SFT 1
+ /*
+ * For non-GRO packets, this value is the
+ * timestamp delta between earliest and latest timestamp values for
+ * TPA packet. If packets were not time stamped, then delta will be
+ * zero.
+ *
+ * For GRO packets, this field is zero except for the following
+ * sub-fields.
+ * - tsdelta[31]
+ * Timestamp present indication. When '0', no Timestamp
+ * option is in the packet. When '1', then a Timestamp
+ * option is present in the packet.
+ */
+ uint32_t tsdelta;
+} __rte_packed;
+
+/*
+ * Last 16 bytes of rx_tpa_end_cmpl.
+ *
+ * This TPA completion structure is used on devices where the
+ * `hwrm_vnic_qcaps.max_aggs_supported` value is 0.
+ */
+/* rx_tpa_end_cmpl_hi (size:128b/16B) */
+struct rx_tpa_end_cmpl_hi {
+ uint32_t tpa_dup_acks;
+ /*
+ * This value is the number of duplicate ACKs that have been
+ * received as part of the TPA operation.
+ */
+ #define RX_TPA_END_CMPL_TPA_DUP_ACKS_MASK UINT32_C(0xf)
+ #define RX_TPA_END_CMPL_TPA_DUP_ACKS_SFT 0
+ /*
+ * This value is the valid when TPA completion is active. It
+ * indicates the length of the longest segment of the TPA operation
+ * for LRO mode and the length of the first segment in GRO mode.
+ *
+ * This value may be used by GRO software to re-construct the original
+ * packet stream from the TPA packet. This is the length of all
+ * but the last segment for GRO. In LRO mode this value may be used
+ * to indicate MSS size to the stack.
+ */
+ uint16_t tpa_seg_len;
+ /* unused4 is 16 b */
+ uint16_t unused3;
+ uint16_t errors_v2;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define RX_TPA_END_CMPL_V2 UINT32_C(0x1)
+ #define RX_TPA_END_CMPL_ERRORS_MASK UINT32_C(0xfffe)
+ #define RX_TPA_END_CMPL_ERRORS_SFT 1
+ /*
+ * This error indicates that there was some sort of problem with
+ * the BDs for the packet that was found after part of the
+ * packet was already placed. The packet should be treated as
+ * invalid.
+ */
+ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe)
+ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_SFT 1
+ /*
+ * This error occurs when there is a fatal HW problem in
+ * the chip only. It indicates that there were not
+ * BDs on chip but that there was adequate reservation.
+ * provided by the TPA block.
+ */
+ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \
+ (UINT32_C(0x2) << 1)
+ /*
+ * This error occurs when TPA block was not configured to
+ * reserve adequate BDs for TPA operations on this RX
+ * ring. All data for the TPA operation was not placed.
+ *
+ * This error can also be generated when the number of
+ * segments is not programmed correctly in TPA and the
+ * 33 total aggregation buffers allowed for the TPA
+ * operation has been exceeded.
+ */
+ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR \
+ (UINT32_C(0x4) << 1)
+ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_LAST \
+ RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR
+ /* unused5 is 16 b */
+ uint16_t unused_4;
+ /*
+ * This is the opaque value that was completed for the TPA start
+ * completion that corresponds to this TPA end completion.
+ */
+ uint32_t start_opaque;
+} __rte_packed;
+
+/*
+ * This TPA completion structure is used on devices where the
+ * `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0.
+ */
+/* rx_tpa_v2_start_cmpl (size:128b/16B) */
+struct rx_tpa_v2_start_cmpl {
+ uint16_t flags_type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define RX_TPA_V2_START_CMPL_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define RX_TPA_V2_START_CMPL_TYPE_SFT 0
+ /*
+ * RX L2 TPA Start Completion:
+ * Completion at the beginning of a TPA operation.
+ * Length = 32B
+ */
+ #define RX_TPA_V2_START_CMPL_TYPE_RX_TPA_START \
+ UINT32_C(0x13)
+ #define RX_TPA_V2_START_CMPL_TYPE_LAST \
+ RX_TPA_V2_START_CMPL_TYPE_RX_TPA_START
+ #define RX_TPA_V2_START_CMPL_FLAGS_MASK \
+ UINT32_C(0xffc0)
+ #define RX_TPA_V2_START_CMPL_FLAGS_SFT 6
+ /* This bit will always be '0' for TPA start completions. */
+ #define RX_TPA_V2_START_CMPL_FLAGS_ERROR \
+ UINT32_C(0x40)
+ /* This field indicates how the packet was placed in the buffer. */
+ #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_MASK \
+ UINT32_C(0x380)
+ #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_SFT 7
+ /*
+ * Jumbo:
+ * TPA Packet was placed using jumbo algorithm. This means
+ * that the first buffer will be filled with data before
+ * moving to aggregation buffers. Each aggregation buffer
+ * will be filled before moving to the next aggregation
+ * buffer.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_JUMBO \
+ (UINT32_C(0x1) << 7)
+ /*
+ * Header/Data Separation:
+ * Packet was placed using Header/Data separation algorithm.
+ * The separation location is indicated by the itype field.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_HDS \
+ (UINT32_C(0x2) << 7)
+ /*
+ * GRO/Jumbo:
+ * Packet will be placed using GRO/Jumbo where the first
+ * packet is filled with data. Subsequent packets will be
+ * placed such that any one packet does not span two
+ * aggregation buffers unless it starts at the beginning of
+ * an aggregation buffer.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \
+ (UINT32_C(0x5) << 7)
+ /*
+ * GRO/Header-Data Separation:
+ * Packet will be placed using GRO/HDS where the header
+ * is in the first packet.
+ * Payload of each packet will be
+ * placed such that any one packet does not span two
+ * aggregation buffers unless it starts at the beginning of
+ * an aggregation buffer.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_GRO_HDS \
+ (UINT32_C(0x6) << 7)
+ #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_LAST \
+ RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_GRO_HDS
+ /* This bit is '1' if the RSS field in this completion is valid. */
+ #define RX_TPA_V2_START_CMPL_FLAGS_RSS_VALID \
+ UINT32_C(0x400)
+ /*
+ * For devices that support timestamps, when this bit is cleared the
+ * `inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset`
+ * field contains the 32b timestamp for
+ * the packet from the MAC. When this bit is set, the
+ * `inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset`
+ * field contains the outer_l3_offset, inner_l2_offset,
+ * inner_l3_offset, and inner_l4_size.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS_TIMESTAMP_FLD_FORMAT \
+ UINT32_C(0x800)
+ /*
+ * This value indicates what the inner packet determined for the
+ * packet was.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS_ITYPE_MASK \
+ UINT32_C(0xf000)
+ #define RX_TPA_V2_START_CMPL_FLAGS_ITYPE_SFT 12
+ /*
+ * TCP Packet:
+ * Indicates that the packet was IP and TCP.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS_ITYPE_TCP \
+ (UINT32_C(0x2) << 12)
+ #define RX_TPA_V2_START_CMPL_FLAGS_ITYPE_LAST \
+ RX_TPA_V2_START_CMPL_FLAGS_ITYPE_TCP
+ /*
+ * This value indicates the amount of packet data written to the
+ * buffer the opaque field in this completion corresponds to.
+ */
+ uint16_t len;
+ /*
+ * This is a copy of the opaque field from the RX BD this completion
+ * corresponds to.
+ */
+ uint32_t opaque;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ uint8_t v1;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define RX_TPA_V2_START_CMPL_V1 UINT32_C(0x1)
+ #define RX_TPA_V2_START_CMPL_LAST RX_TPA_V2_START_CMPL_V1
+ /*
+ * This is the RSS hash type for the packet. The value is packed
+ * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}.
+ *
+ * The value of tuple_extrac_op provides the information about
+ * what fields the hash was computed on.
+ * * 0: The RSS hash was computed over source IP address,
+ * destination IP address, source port, and destination port of inner
+ * IP and TCP or UDP headers. Note: For non-tunneled packets,
+ * the packet headers are considered inner packet headers for the RSS
+ * hash computation purpose.
+ * * 1: The RSS hash was computed over source IP address and destination
+ * IP address of inner IP header. Note: For non-tunneled packets,
+ * the packet headers are considered inner packet headers for the RSS
+ * hash computation purpose.
+ * * 2: The RSS hash was computed over source IP address,
+ * destination IP address, source port, and destination port of
+ * IP and TCP or UDP headers of outer tunnel headers.
+ * Note: For non-tunneled packets, this value is not applicable.
+ * * 3: The RSS hash was computed over source IP address and
+ * destination IP address of IP header of outer tunnel headers.
+ * Note: For non-tunneled packets, this value is not applicable.
+ *
+ * Note that 4-tuples values listed above are applicable
+ * for layer 4 protocols supported and enabled for RSS in the hardware,
+ * HWRM firmware, and drivers. For example, if RSS hash is supported and
+ * enabled for TCP traffic only, then the values of tuple_extract_op
+ * corresponding to 4-tuples are only valid for TCP traffic.
+ */
+ uint8_t rss_hash_type;
+ /*
+ * This is the aggregation ID that the completion is associated
+ * with. Use this number to correlate the TPA start completion
+ * with the TPA end completion.
+ */
+ uint16_t agg_id;
+ /*
+ * This value is the RSS hash value calculated for the packet
+ * based on the mode bits and key value in the VNIC.
+ */
+ uint32_t rss_hash;
+} __rte_packed;
+
+/*
+ * Last 16 bytes of rx_tpa_v2_start_cmpl.
+ *
+ * This TPA completion structure is used on devices where the
+ * `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0.
+ */
+/* rx_tpa_v2_start_cmpl_hi (size:128b/16B) */
+struct rx_tpa_v2_start_cmpl_hi {
+ uint32_t flags2;
+ /*
+ * This indicates that the ip checksum was calculated for the
+ * inner packet and that the sum passed for all segments
+ * included in the aggregation.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS2_IP_CS_CALC \
+ UINT32_C(0x1)
+ /*
+ * This indicates that the TCP, UDP or ICMP checksum was
+ * calculated for the inner packet and that the sum passed
+ * for all segments included in the aggregation.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS2_L4_CS_CALC \
+ UINT32_C(0x2)
+ /*
+ * This indicates that the ip checksum was calculated for the
+ * tunnel header and that the sum passed for all segments
+ * included in the aggregation.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS2_T_IP_CS_CALC \
+ UINT32_C(0x4)
+ /*
+ * This indicates that the UDP checksum was
+ * calculated for the tunnel packet and that the sum passed for
+ * all segments included in the aggregation.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS2_T_L4_CS_CALC \
+ UINT32_C(0x8)
+ /* This value indicates what format the metadata field is. */
+ #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_MASK \
+ UINT32_C(0xf0)
+ #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_SFT 4
+ /* No metadata informtaion. Value is zero. */
+ #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_NONE \
+ (UINT32_C(0x0) << 4)
+ /*
+ * The metadata field contains the VLAN tag and TPID value.
+ * - metadata[11:0] contains the vlan VID value.
+ * - metadata[12] contains the vlan DE value.
+ * - metadata[15:13] contains the vlan PRI value.
+ * - metadata[31:16] contains the vlan TPID value.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_VLAN \
+ (UINT32_C(0x1) << 4)
+ /*
+ * If ext_meta_format is equal to 1, the metadata field
+ * contains the lower 16b of the tunnel ID value, justified
+ * to LSB
+ * - VXLAN = VNI[23:0] -> VXLAN Network ID
+ * - Geneve (NGE) = VNI[23:0] a-> Virtual Network Identifier.
+ * - NVGRE = TNI[23:0] -> Tenant Network ID
+ * - GRE = KEY[31:0 -> key fieled with bit mask. zero if K = 0
+ * - IPV4 = 0 (not populated)
+ * - IPV6 = Flow Label[19:0]
+ * - PPPoE = sessionID[15:0]
+ * - MPLs = Outer label[19:0]
+ * - UPAR = Selected[31:0] with bit mask
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_TUNNEL_ID \
+ (UINT32_C(0x2) << 4)
+ /*
+ * if ext_meta_format is equal to 1, metadata field contains
+ * 16b metadata from the prepended header (chdr_data).
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_CHDR_DATA \
+ (UINT32_C(0x3) << 4)
+ /*
+ * If ext_meta_format is equal to 1, the metadata field contains
+ * the outer_l3_offset, inner_l2_offset, inner_l3_offset and
+ * inner_l4_size.
+ * - metadata[8:0] contains the outer_l3_offset.
+ * - metadata[17:9] contains the inner_l2_offset.
+ * - metadata[26:18] contains the inner_l3_offset.
+ * - metadata[31:27] contains the inner_l4_size.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET \
+ (UINT32_C(0x4) << 4)
+ #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_LAST \
+ RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET
+ /*
+ * This field indicates the IP type for the inner-most IP header.
+ * A value of '0' indicates IPv4. A value of '1' indicates IPv6.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS2_IP_TYPE \
+ UINT32_C(0x100)
+ /*
+ * This indicates that the complete 1's complement checksum was
+ * calculated for the packet.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS2_COMPLETE_CHECKSUM_CALC \
+ UINT32_C(0x200)
+ /*
+ * The combination of this value and meta_format indicated what
+ * format the metadata field is.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS2_EXT_META_FORMAT_MASK \
+ UINT32_C(0xc00)
+ #define RX_TPA_V2_START_CMPL_FLAGS2_EXT_META_FORMAT_SFT 10
+ /*
+ * This value is the complete 1's complement checksum calculated from
+ * the start of the outer L3 header to the end of the packet (not
+ * including the ethernet crc). It is valid when the
+ * 'complete_checksum_calc' flag is set. For TPA Start completions,
+ * the complete checksum is calculated for the first packet in the
+ * aggregation only.
+ */
+ #define RX_TPA_V2_START_CMPL_FLAGS2_COMPLETE_CHECKSUM_MASK \
+ UINT32_C(0xffff0000)
+ #define RX_TPA_V2_START_CMPL_FLAGS2_COMPLETE_CHECKSUM_SFT 16
+ /*
+ * This is data from the CFA block as indicated by the meta_format
+ * field.
+ */
+ uint32_t metadata;
+ /* When {ext_meta_format,meta_format}=1, this value is the VLAN VID. */
+ #define RX_TPA_V2_START_CMPL_METADATA_VID_MASK UINT32_C(0xfff)
+ #define RX_TPA_V2_START_CMPL_METADATA_VID_SFT 0
+ /* When {ext_meta_format,meta_format}=1, this value is the VLAN DE. */
+ #define RX_TPA_V2_START_CMPL_METADATA_DE UINT32_C(0x1000)
+ /* When {ext_meta_format,meta_format}=1, this value is the VLAN PRI. */
+ #define RX_TPA_V2_START_CMPL_METADATA_PRI_MASK UINT32_C(0xe000)
+ #define RX_TPA_V2_START_CMPL_METADATA_PRI_SFT 13
+ /* When {ext_meta_format,meta_format}=1, this value is the VLAN TPID. */
+ #define RX_TPA_V2_START_CMPL_METADATA_TPID_MASK UINT32_C(0xffff0000)
+ #define RX_TPA_V2_START_CMPL_METADATA_TPID_SFT 16
+ uint16_t errors_v2;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define RX_TPA_V2_START_CMPL_V2 \
+ UINT32_C(0x1)
+ #define RX_TPA_V2_START_CMPL_ERRORS_MASK \
+ UINT32_C(0xfffe)
+ #define RX_TPA_V2_START_CMPL_ERRORS_SFT 1
+ /*
+ * This error indicates that there was some sort of problem with
+ * the BDs for the packet that was found after part of the
+ * packet was already placed. The packet should be treated as
+ * invalid.
+ */
+ #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_MASK \
+ UINT32_C(0xe)
+ #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_SFT 1
+ /* No buffer error */
+ #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER \
+ (UINT32_C(0x0) << 1)
+ /*
+ * Bad Format:
+ * BDs were not formatted correctly.
+ */
+ #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \
+ (UINT32_C(0x3) << 1)
+ /*
+ * Flush:
+ * There was a bad_format error on the previous operation
+ */
+ #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_FLUSH \
+ (UINT32_C(0x5) << 1)
+ #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_LAST \
+ RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_FLUSH
+ /*
+ * This field identifies the CFA action rule that was used for this
+ * packet.
+ */
+ uint16_t cfa_code;
+ /*
+ * For devices that support timestamps this field is overridden
+ * with the timestamp value. When `flags.timestamp_fld_format` is
+ * cleared, this field contains the 32b timestamp for the packet from the
+ * MAC.
+ *
+ * When `flags.timestamp_fld_format` is set, this field contains the
+ * outer_l3_offset, inner_l2_offset, inner_l3_offset, and inner_l4_size
+ * as defined below.
+ */
+ uint32_t inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset;
+ /*
+ * This is the offset from the beginning of the packet in bytes for
+ * the outer L3 header. If there is no outer L3 header, then this
+ * value is zero.
+ */
+ #define RX_TPA_V2_START_CMPL_OUTER_L3_OFFSET_MASK UINT32_C(0x1ff)
+ #define RX_TPA_V2_START_CMPL_OUTER_L3_OFFSET_SFT 0
+ /*
+ * This is the offset from the beginning of the packet in bytes for
+ * the inner most L2 header.
+ */
+ #define RX_TPA_V2_START_CMPL_INNER_L2_OFFSET_MASK UINT32_C(0x3fe00)
+ #define RX_TPA_V2_START_CMPL_INNER_L2_OFFSET_SFT 9
+ /*
+ * This is the offset from the beginning of the packet in bytes for
+ * the inner most L3 header.
+ */
+ #define RX_TPA_V2_START_CMPL_INNER_L3_OFFSET_MASK UINT32_C(0x7fc0000)
+ #define RX_TPA_V2_START_CMPL_INNER_L3_OFFSET_SFT 18
+ /*
+ * This is the size in bytes of the inner most L4 header.
+ * This can be subtracted from the payload_offset to determine
+ * the start of the inner most L4 header.
+ */
+ #define RX_TPA_V2_START_CMPL_INNER_L4_SIZE_MASK UINT32_C(0xf8000000)
+ #define RX_TPA_V2_START_CMPL_INNER_L4_SIZE_SFT 27
+} __rte_packed;
+
+/*
+ * This TPA completion structure is used on devices where the
+ * `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0.
+ */
+/* rx_tpa_v2_end_cmpl (size:128b/16B) */
+struct rx_tpa_v2_end_cmpl {
+ uint16_t flags_type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define RX_TPA_V2_END_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define RX_TPA_V2_END_CMPL_TYPE_SFT 0
+ /*
+ * RX L2 TPA End Completion:
+ * Completion at the end of a TPA operation.
+ * Length = 32B
+ */
+ #define RX_TPA_V2_END_CMPL_TYPE_RX_TPA_END UINT32_C(0x15)
+ #define RX_TPA_V2_END_CMPL_TYPE_LAST \
+ RX_TPA_V2_END_CMPL_TYPE_RX_TPA_END
+ #define RX_TPA_V2_END_CMPL_FLAGS_MASK UINT32_C(0xffc0)
+ #define RX_TPA_V2_END_CMPL_FLAGS_SFT 6
+ /*
+ * When this bit is '1', it indicates a packet that has an
+ * error of some type. Type of error is indicated in
+ * error_flags.
+ */
+ #define RX_TPA_V2_END_CMPL_FLAGS_ERROR UINT32_C(0x40)
+ /* This field indicates how the packet was placed in the buffer. */
+ #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380)
+ #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_SFT 7
+ /*
+ * Jumbo:
+ * TPA Packet was placed using jumbo algorithm. This means
+ * that the first buffer will be filled with data before
+ * moving to aggregation buffers. Each aggregation buffer
+ * will be filled before moving to the next aggregation
+ * buffer.
+ */
+ #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_JUMBO \
+ (UINT32_C(0x1) << 7)
+ /*
+ * Header/Data Separation:
+ * Packet was placed using Header/Data separation algorithm.
+ * The separation location is indicated by the itype field.
+ */
+ #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_HDS \
+ (UINT32_C(0x2) << 7)
+ /*
+ * GRO/Jumbo:
+ * Packet will be placed using GRO/Jumbo where the first
+ * packet is filled with data. Subsequent packets will be
+ * placed such that any one packet does not span two
+ * aggregation buffers unless it starts at the beginning of
+ * an aggregation buffer.
+ */
+ #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \
+ (UINT32_C(0x5) << 7)
+ /*
+ * GRO/Header-Data Separation:
+ * Packet will be placed using GRO/HDS where the header
+ * is in the first packet.
+ * Payload of each packet will be
+ * placed such that any one packet does not span two
+ * aggregation buffers unless it starts at the beginning of
+ * an aggregation buffer.
+ */
+ #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_GRO_HDS \
+ (UINT32_C(0x6) << 7)
+ #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_LAST \
+ RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_GRO_HDS
+ /* unused is 2 b */
+ #define RX_TPA_V2_END_CMPL_FLAGS_UNUSED_MASK UINT32_C(0xc00)
+ #define RX_TPA_V2_END_CMPL_FLAGS_UNUSED_SFT 10
+ /*
+ * This value indicates what the inner packet determined for the
+ * packet was.
+ * - 2 TCP Packet
+ * Indicates that the packet was IP and TCP. This indicates
+ * that the ip_cs field is valid and that the tcp_udp_cs
+ * field is valid and contains the TCP checksum.
+ * This also indicates that the payload_offset field is valid.
+ */
+ #define RX_TPA_V2_END_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000)
+ #define RX_TPA_V2_END_CMPL_FLAGS_ITYPE_SFT 12
+ /*
+ * This value is zero for TPA End completions.
+ * There is no data in the buffer that corresponds to the opaque
+ * value in this completion.
+ */
+ uint16_t len;
+ /*
+ * This is a copy of the opaque field from the RX BD this completion
+ * corresponds to.
+ */
+ uint32_t opaque;
+ uint8_t v1;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define RX_TPA_V2_END_CMPL_V1 UINT32_C(0x1)
+ /* This value is the number of segments in the TPA operation. */
+ uint8_t tpa_segs;
+ /*
+ * This is the aggregation ID that the completion is associated
+ * with. Use this number to correlate the TPA start completion
+ * with the TPA end completion.
+ */
+ uint16_t agg_id;
+ /*
+ * For non-GRO packets, this value is the
+ * timestamp delta between earliest and latest timestamp values for
+ * TPA packet. If packets were not time stamped, then delta will be
+ * zero.
+ *
+ * For GRO packets, this field is zero except for the following
+ * sub-fields.
+ * - tsdelta[31]
+ * Timestamp present indication. When '0', no Timestamp
+ * option is in the packet. When '1', then a Timestamp
+ * option is present in the packet.
+ */
+ uint32_t tsdelta;
+} __rte_packed;
+
+/*
+ * Last 16 bytes of rx_tpa_v2_end_cmpl.
+ *
+ * This TPA completion structure is used on devices where the
+ * `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0.
+ */
+/* rx_tpa_v2_end_cmpl_hi (size:128b/16B) */
+struct rx_tpa_v2_end_cmpl_hi {
+ /*
+ * This value is the number of duplicate ACKs that have been
+ * received as part of the TPA operation.
+ */
+ uint16_t tpa_dup_acks;
+ /*
+ * This value is the number of duplicate ACKs that have been
+ * received as part of the TPA operation.
+ */
+ #define RX_TPA_V2_END_CMPL_TPA_DUP_ACKS_MASK UINT32_C(0xf)
+ #define RX_TPA_V2_END_CMPL_TPA_DUP_ACKS_SFT 0
+ /*
+ * This value indicated the offset in bytes from the beginning of
+ * the packet where the inner payload starts. This value is valid
+ * for TCP, UDP, FCoE and RoCE packets
+ */
+ uint8_t payload_offset;
+ /*
+ * The value is the total number of aggregation buffers that were
+ * used in the TPA operation. All TPA aggregation buffer completions
+ * precede the TPA End completion. If the value is zero, then the
+ * aggregation is completely contained in the buffer space provided
+ * in the aggregation start completion.
+ * Note that the field is simply provided as a cross check.
+ */
+ uint8_t tpa_agg_bufs;
+ /*
+ * This value is the valid when TPA completion is active. It
+ * indicates the length of the longest segment of the TPA operation
+ * for LRO mode and the length of the first segment in GRO mode.
+ *
+ * This value may be used by GRO software to re-construct the original
+ * packet stream from the TPA packet. This is the length of all
+ * but the last segment for GRO. In LRO mode this value may be used
+ * to indicate MSS size to the stack.
+ */
+ uint16_t tpa_seg_len;
+ uint16_t unused_1;
+ uint16_t errors_v2;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define RX_TPA_V2_END_CMPL_V2 UINT32_C(0x1)
+ #define RX_TPA_V2_END_CMPL_ERRORS_MASK \
+ UINT32_C(0xfffe)
+ #define RX_TPA_V2_END_CMPL_ERRORS_SFT 1
+ /*
+ * This error indicates that there was some sort of problem with
+ * the BDs for the packet that was found after part of the
+ * packet was already placed. The packet should be treated as
+ * invalid.
+ */
+ #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_MASK \
+ UINT32_C(0xe)
+ #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_SFT 1
+ /* No buffer error */
+ #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER \
+ (UINT32_C(0x0) << 1)
+ /*
+ * This error occurs when there is a fatal HW problem in
+ * the chip only. It indicates that there were not
+ * BDs on chip but that there was adequate reservation.
+ * provided by the TPA block.
+ */
+ #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \
+ (UINT32_C(0x2) << 1)
+ /*
+ * Bad Format:
+ * BDs were not formatted correctly.
+ */
+ #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \
+ (UINT32_C(0x3) << 1)
+ /*
+ * This error occurs when TPA block was not configured to
+ * reserve adequate BDs for TPA operations on this RX
+ * ring. All data for the TPA operation was not placed.
+ *
+ * This error can also be generated when the number of
+ * segments is not programmed correctly in TPA and the
+ * 33 total aggregation buffers allowed for the TPA
+ * operation has been exceeded.
+ */
+ #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR \
+ (UINT32_C(0x4) << 1)
+ /*
+ * Flush:
+ * There was a bad_format error on the previous operation
+ */
+ #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_FLUSH \
+ (UINT32_C(0x5) << 1)
+ #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_LAST \
+ RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_FLUSH
+ uint16_t unused_2;
+ /*
+ * This is the opaque value that was completed for the TPA start
+ * completion that corresponds to this TPA end completion.
+ */
+ uint32_t start_opaque;
+} __rte_packed;
+
+/*
+ * This TPA completion structure is used on devices where the
+ * `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0.
+ */
+/* rx_tpa_v2_abuf_cmpl (size:128b/16B) */
+struct rx_tpa_v2_abuf_cmpl {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define RX_TPA_V2_ABUF_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define RX_TPA_V2_ABUF_CMPL_TYPE_SFT 0
+ /*
+ * RX TPA Aggregation Buffer completion :
+ * Completion of an L2 aggregation buffer in support of
+ * TPA packet completion. Length = 16B
+ */
+ #define RX_TPA_V2_ABUF_CMPL_TYPE_RX_TPA_AGG UINT32_C(0x16)
+ #define RX_TPA_V2_ABUF_CMPL_TYPE_LAST \
+ RX_TPA_V2_ABUF_CMPL_TYPE_RX_TPA_AGG
+ /*
+ * This is the length of the data for the packet stored in this
+ * aggregation buffer identified by the opaque value. This does not
+ * include the length of any
+ * data placed in other aggregation BDs or in the packet or buffer
+ * BDs. This length does not include any space added due to
+ * hdr_offset register during HDS placement mode.
+ */
+ uint16_t len;
+ /*
+ * This is a copy of the opaque field from the RX BD this aggregation
+ * buffer corresponds to.
+ */
+ uint32_t opaque;
+ uint16_t v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define RX_TPA_V2_ABUF_CMPL_V UINT32_C(0x1)
+ /*
+ * This is the aggregation ID that the completion is associated with. Use
+ * this number to correlate the TPA agg completion with the TPA start
+ * completion and the TPA end completion.
+ */
+ uint16_t agg_id;
+ uint32_t unused_1;
+} __rte_packed;
+
+/* rx_abuf_cmpl (size:128b/16B) */
+struct rx_abuf_cmpl {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define RX_ABUF_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define RX_ABUF_CMPL_TYPE_SFT 0
+ /*
+ * RX Aggregation Buffer completion :
+ * Completion of an L2 aggregation buffer in support of
+ * TPA, HDS, or Jumbo packet completion. Length = 16B
+ */
+ #define RX_ABUF_CMPL_TYPE_RX_AGG UINT32_C(0x12)
+ #define RX_ABUF_CMPL_TYPE_LAST RX_ABUF_CMPL_TYPE_RX_AGG
+ /*
+ * This is the length of the data for the packet stored in this
+ * aggregation buffer identified by the opaque value. This does not
+ * include the length of any
+ * data placed in other aggregation BDs or in the packet or buffer
+ * BDs. This length does not include any space added due to
+ * hdr_offset register during HDS placement mode.
+ */
+ uint16_t len;
+ /*
+ * This is a copy of the opaque field from the RX BD this aggregation
+ * buffer corresponds to.
+ */
+ uint32_t opaque;
+ uint32_t v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define RX_ABUF_CMPL_V UINT32_C(0x1)
+ /* unused3 is 32 b */
+ uint32_t unused_2;
+} __rte_packed;
+
+/* VEE FLUSH Completion Record (16 bytes) */
+/* vee_flush (size:128b/16B) */
+struct vee_flush {
+ uint32_t downstream_path_type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define VEE_FLUSH_TYPE_MASK UINT32_C(0x3f)
+ #define VEE_FLUSH_TYPE_SFT 0
+ /*
+ * VEE Flush Completion:
+ * This completion is inserted manually by the Primate and processed
+ * by the VEE hardware to ensure that all completions on a VEE
+ * function have been processed by the VEE hardware before FLR
+ * process is completed.
+ */
+ #define VEE_FLUSH_TYPE_VEE_FLUSH UINT32_C(0x1c)
+ #define VEE_FLUSH_TYPE_LAST VEE_FLUSH_TYPE_VEE_FLUSH
+ /* downstream_path is 1 b */
+ #define VEE_FLUSH_DOWNSTREAM_PATH UINT32_C(0x40)
+ /* This completion is associated with VEE Transmit */
+ #define VEE_FLUSH_DOWNSTREAM_PATH_TX (UINT32_C(0x0) << 6)
+ /* This completion is associated with VEE Receive */
+ #define VEE_FLUSH_DOWNSTREAM_PATH_RX (UINT32_C(0x1) << 6)
+ #define VEE_FLUSH_DOWNSTREAM_PATH_LAST VEE_FLUSH_DOWNSTREAM_PATH_RX
+ /*
+ * This is an opaque value that is passed through the completion
+ * to the VEE handler SW and is used to indicate what VEE VQ or
+ * function has completed FLR processing.
+ */
+ uint32_t opaque;
+ uint32_t v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes will
+ * write 1. The odd passes will write 0.
+ */
+ #define VEE_FLUSH_V UINT32_C(0x1)
+ /* unused3 is 32 b */
+ uint32_t unused_3;
+} __rte_packed;
+
+/* eject_cmpl (size:128b/16B) */
+struct eject_cmpl {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define EJECT_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define EJECT_CMPL_TYPE_SFT 0
+ /*
+ * Statistics Ejection Completion:
+ * Completion of statistics data ejection buffer.
+ * Length = 16B
+ */
+ #define EJECT_CMPL_TYPE_STAT_EJECT UINT32_C(0x1a)
+ #define EJECT_CMPL_TYPE_LAST EJECT_CMPL_TYPE_STAT_EJECT
+ #define EJECT_CMPL_FLAGS_MASK UINT32_C(0xffc0)
+ #define EJECT_CMPL_FLAGS_SFT 6
+ /*
+ * When this bit is '1', it indicates a packet that has an
+ * error of some type. Type of error is indicated in
+ * error_flags.
+ */
+ #define EJECT_CMPL_FLAGS_ERROR UINT32_C(0x40)
+ /*
+ * This is the length of the statistics data stored in this
+ * buffer.
+ */
+ uint16_t len;
+ /*
+ * This is a copy of the opaque field from the RX BD this ejection
+ * buffer corresponds to.
+ */
+ uint32_t opaque;
+ uint16_t v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define EJECT_CMPL_V UINT32_C(0x1)
+ #define EJECT_CMPL_ERRORS_MASK UINT32_C(0xfffe)
+ #define EJECT_CMPL_ERRORS_SFT 1
+ /*
+ * This error indicates that there was some sort of problem with
+ * the BDs for statistics ejection. The statistics ejection should
+ * be treated as invalid
+ */
+ #define EJECT_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe)
+ #define EJECT_CMPL_ERRORS_BUFFER_ERROR_SFT 1
+ /* No buffer error */
+ #define EJECT_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER \
+ (UINT32_C(0x0) << 1)
+ /*
+ * Did Not Fit:
+ * Statistics did not fit into aggregation buffer provided.
+ */
+ #define EJECT_CMPL_ERRORS_BUFFER_ERROR_DID_NOT_FIT \
+ (UINT32_C(0x1) << 1)
+ /*
+ * Bad Format:
+ * BDs were not formatted correctly.
+ */
+ #define EJECT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \
+ (UINT32_C(0x3) << 1)
+ /*
+ * Flush:
+ * There was a bad_format error on the previous operation
+ */
+ #define EJECT_CMPL_ERRORS_BUFFER_ERROR_FLUSH \
+ (UINT32_C(0x5) << 1)
+ #define EJECT_CMPL_ERRORS_BUFFER_ERROR_LAST \
+ EJECT_CMPL_ERRORS_BUFFER_ERROR_FLUSH
+ /* reserved16 is 16 b */
+ uint16_t reserved16;
+ /* unused3 is 32 b */
+ uint32_t unused_2;
+} __rte_packed;
+
+/* hwrm_cmpl (size:128b/16B) */
+struct hwrm_cmpl {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_CMPL_TYPE_SFT 0
+ /*
+ * HWRM Command Completion:
+ * Completion of an HWRM command.
+ */
+ #define HWRM_CMPL_TYPE_HWRM_DONE UINT32_C(0x20)
+ #define HWRM_CMPL_TYPE_LAST HWRM_CMPL_TYPE_HWRM_DONE
+ /* This is the sequence_id of the HWRM command that has completed. */
+ uint16_t sequence_id;
+ /* unused2 is 32 b */
+ uint32_t unused_1;
+ uint32_t v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_CMPL_V UINT32_C(0x1)
+ /* unused4 is 32 b */
+ uint32_t unused_3;
+} __rte_packed;
+
+/* hwrm_fwd_req_cmpl (size:128b/16B) */
+struct hwrm_fwd_req_cmpl {
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ uint16_t req_len_type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_FWD_REQ_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_FWD_REQ_CMPL_TYPE_SFT 0
+ /* Forwarded HWRM Request */
+ #define HWRM_FWD_REQ_CMPL_TYPE_HWRM_FWD_REQ UINT32_C(0x22)
+ #define HWRM_FWD_REQ_CMPL_TYPE_LAST \
+ HWRM_FWD_REQ_CMPL_TYPE_HWRM_FWD_REQ
+ /* Length of forwarded request in bytes. */
+ #define HWRM_FWD_REQ_CMPL_REQ_LEN_MASK UINT32_C(0xffc0)
+ #define HWRM_FWD_REQ_CMPL_REQ_LEN_SFT 6
+ /*
+ * Source ID of this request.
+ * Typically used in forwarding requests and responses.
+ * 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors
+ * 0xFFFF - HWRM
+ */
+ uint16_t source_id;
+ /* unused1 is 32 b */
+ uint32_t unused0;
+ /* Address of forwarded request. */
+ uint32_t req_buf_addr_v[2];
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_FWD_REQ_CMPL_V UINT32_C(0x1)
+ /* Address of forwarded request. */
+ #define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_MASK UINT32_C(0xfffffffe)
+ #define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_SFT 1
+} __rte_packed;
+
+/* hwrm_fwd_resp_cmpl (size:128b/16B) */
+struct hwrm_fwd_resp_cmpl {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_FWD_RESP_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_FWD_RESP_CMPL_TYPE_SFT 0
+ /* Forwarded HWRM Response */
+ #define HWRM_FWD_RESP_CMPL_TYPE_HWRM_FWD_RESP UINT32_C(0x24)
+ #define HWRM_FWD_RESP_CMPL_TYPE_LAST \
+ HWRM_FWD_RESP_CMPL_TYPE_HWRM_FWD_RESP
+ /*
+ * Source ID of this response.
+ * Typically used in forwarding requests and responses.
+ * 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors
+ * 0xFFFF - HWRM
+ */
+ uint16_t source_id;
+ /* Length of forwarded response in bytes. */
+ uint16_t resp_len;
+ /* unused2 is 16 b */
+ uint16_t unused_1;
+ /* Address of forwarded request. */
+ uint32_t resp_buf_addr_v[2];
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_FWD_RESP_CMPL_V UINT32_C(0x1)
+ /* Address of forwarded request. */
+ #define HWRM_FWD_RESP_CMPL_RESP_BUF_ADDR_MASK UINT32_C(0xfffffffe)
+ #define HWRM_FWD_RESP_CMPL_RESP_BUF_ADDR_SFT 1
+} __rte_packed;
+
+/* hwrm_async_event_cmpl (size:128b/16B) */
+struct hwrm_async_event_cmpl {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Link status changed */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_STATUS_CHANGE \
+ UINT32_C(0x0)
+ /* Link MTU changed */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_MTU_CHANGE \
+ UINT32_C(0x1)
+ /* Link speed changed */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CHANGE \
+ UINT32_C(0x2)
+ /* DCB Configuration changed */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DCB_CONFIG_CHANGE \
+ UINT32_C(0x3)
+ /* Port connection not allowed */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_CONN_NOT_ALLOWED \
+ UINT32_C(0x4)
+ /* Link speed configuration was not allowed */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED \
+ UINT32_C(0x5)
+ /* Link speed configuration change */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_CHANGE \
+ UINT32_C(0x6)
+ /* Port PHY configuration change */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_PHY_CFG_CHANGE \
+ UINT32_C(0x7)
+ /* Reset notification to clients */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_RESET_NOTIFY \
+ UINT32_C(0x8)
+ /* Master function selection event */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_ERROR_RECOVERY \
+ UINT32_C(0x9)
+ /* Function driver unloaded */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_UNLOAD \
+ UINT32_C(0x10)
+ /* Function driver loaded */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_LOAD \
+ UINT32_C(0x11)
+ /* Function FLR related processing has completed */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_FLR_PROC_CMPLT \
+ UINT32_C(0x12)
+ /* PF driver unloaded */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_UNLOAD \
+ UINT32_C(0x20)
+ /* PF driver loaded */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_LOAD \
+ UINT32_C(0x21)
+ /* VF Function Level Reset (FLR) */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_FLR \
+ UINT32_C(0x30)
+ /* VF MAC Address Change */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_MAC_ADDR_CHANGE \
+ UINT32_C(0x31)
+ /* PF-VF communication channel status change. */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_VF_COMM_STATUS_CHANGE \
+ UINT32_C(0x32)
+ /* VF Configuration Change */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_CFG_CHANGE \
+ UINT32_C(0x33)
+ /* LLFC/PFC Configuration Change */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LLFC_PFC_CHANGE \
+ UINT32_C(0x34)
+ /* Default VNIC Configuration Change */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DEFAULT_VNIC_CHANGE \
+ UINT32_C(0x35)
+ /* HW flow aged */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_HW_FLOW_AGED \
+ UINT32_C(0x36)
+ /*
+ * A debug notification being posted to the driver. These
+ * notifications are purely for diagnostic purpose and should not be
+ * used for functional purpose. The driver is not supposed to act
+ * on these messages except to log/record it.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DEBUG_NOTIFICATION \
+ UINT32_C(0x37)
+ /*
+ * An EEM flow cached memory flush for all flows request event being
+ * posted to the PF driver.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_EEM_CACHE_FLUSH_REQ \
+ UINT32_C(0x38)
+ /*
+ * An EEM flow cache memory flush completion event being posted to the
+ * firmware by the PF driver. This is indication that host EEM flush
+ * has completed by the PF.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_EEM_CACHE_FLUSH_DONE \
+ UINT32_C(0x39)
+ /*
+ * A tcp flag action change event being posted to the PF or trusted VF
+ * driver by the firmware. The PF or trusted VF driver should query
+ * the firmware for the new TCP flag action update after receiving
+ * this async event.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_TCP_FLAG_ACTION_CHANGE \
+ UINT32_C(0x3a)
+ /*
+ * An EEM flow active event being posted to the PF or trusted VF driver
+ * by the firmware. The PF or trusted VF driver should update the
+ * flow's aging timer after receiving this async event.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_EEM_FLOW_ACTIVE \
+ UINT32_C(0x3b)
+ /*
+ * A eem cfg change event being posted to the trusted VF driver by the
+ * firmware if the parent PF EEM configuration changed.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_EEM_CFG_CHANGE \
+ UINT32_C(0x3c)
+ /*
+ * Deprecated.
+ * TFLIB unique default VNIC Configuration Change
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_TFLIB_DEFAULT_VNIC_CHANGE \
+ UINT32_C(0x3d)
+ /*
+ * Deprecated.
+ * TFLIB unique link status changed
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_TFLIB_LINK_STATUS_CHANGE \
+ UINT32_C(0x3e)
+ /*
+ * An event signifying completion for HWRM_FW_STATE_QUIESCE
+ * (completion, timeout, or error)
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_QUIESCE_DONE \
+ UINT32_C(0x3f)
+ /*
+ * An event signifying a HWRM command is in progress and its
+ * response will be deferred. This event is used on crypto controllers
+ * only.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DEFERRED_RESPONSE \
+ UINT32_C(0x40)
+ /*
+ * An event signifying that a PFC WatchDog configuration
+ * has changed on any port / cos.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PFC_WATCHDOG_CFG_CHANGE \
+ UINT32_C(0x41)
+ /*
+ * A trace log message. This contains firmware trace logs string
+ * embedded in the asynchronous message. This is an experimental
+ * event, not meant for production use at this time.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FW_TRACE_MSG \
+ UINT32_C(0xfe)
+ /* HWRM Error */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_HWRM_ERROR \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_EVENT_ID_HWRM_ERROR
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_link_status_change (size:128b/16B) */
+struct hwrm_async_event_cmpl_link_status_change {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Link status changed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_ID_LINK_STATUS_CHANGE \
+ UINT32_C(0x0)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_ID_LINK_STATUS_CHANGE
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Indicates link status change */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE \
+ UINT32_C(0x1)
+ /*
+ * If this bit set to 0, then it indicates that the link
+ * was up and it went down.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_DOWN \
+ UINT32_C(0x0)
+ /*
+ * If this bit is set to 1, then it indicates that the link
+ * was down and it went up.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_UP \
+ UINT32_C(0x1)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_UP
+ /* Indicates the physical port this link status change occur */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_MASK \
+ UINT32_C(0xe)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_SFT \
+ 1
+ /* PORT ID */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_ID_MASK \
+ UINT32_C(0xffff0)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_ID_SFT \
+ 4
+ /* Indicates the physical function this event occurred on. */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PF_ID_MASK \
+ UINT32_C(0xff00000)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PF_ID_SFT \
+ 20
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_link_mtu_change (size:128b/16B) */
+struct hwrm_async_event_cmpl_link_mtu_change {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Link MTU changed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_ID_LINK_MTU_CHANGE \
+ UINT32_C(0x1)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_ID_LINK_MTU_CHANGE
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* The new MTU of the link in bytes. */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_DATA1_NEW_MTU_MASK \
+ UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_DATA1_NEW_MTU_SFT 0
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_link_speed_change (size:128b/16B) */
+struct hwrm_async_event_cmpl_link_speed_change {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Link speed changed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_ID_LINK_SPEED_CHANGE \
+ UINT32_C(0x2)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_ID_LINK_SPEED_CHANGE
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /*
+ * When this bit is '1', the link was forced to the
+ * force_link_speed value.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_FORCE \
+ UINT32_C(0x1)
+ /* The new link speed in 100 Mbps units. */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_MASK \
+ UINT32_C(0xfffe)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_SFT \
+ 1
+ /* 100Mb link speed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_100MB \
+ (UINT32_C(0x1) << 1)
+ /* 1Gb link speed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_1GB \
+ (UINT32_C(0xa) << 1)
+ /* 2Gb link speed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_2GB \
+ (UINT32_C(0x14) << 1)
+ /* 25Gb link speed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_2_5GB \
+ (UINT32_C(0x19) << 1)
+ /* 10Gb link speed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_10GB \
+ (UINT32_C(0x64) << 1)
+ /* 20Mb link speed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_20GB \
+ (UINT32_C(0xc8) << 1)
+ /* 25Gb link speed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_25GB \
+ (UINT32_C(0xfa) << 1)
+ /* 40Gb link speed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_40GB \
+ (UINT32_C(0x190) << 1)
+ /* 50Gb link speed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_50GB \
+ (UINT32_C(0x1f4) << 1)
+ /* 100Gb link speed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_100GB \
+ (UINT32_C(0x3e8) << 1)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_LAST \
+ HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_100GB
+ /* PORT ID */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_PORT_ID_MASK \
+ UINT32_C(0xffff0000)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_PORT_ID_SFT \
+ 16
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_dcb_config_change (size:128b/16B) */
+struct hwrm_async_event_cmpl_dcb_config_change {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* DCB Configuration changed */
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_ID_DCB_CONFIG_CHANGE \
+ UINT32_C(0x3)
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_ID_DCB_CONFIG_CHANGE
+ /* Event specific data */
+ uint32_t event_data2;
+ /* ETS configuration change */
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_ETS \
+ UINT32_C(0x1)
+ /* PFC configuration change */
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_PFC \
+ UINT32_C(0x2)
+ /* APP configuration change */
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_APP \
+ UINT32_C(0x4)
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* PORT ID */
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_PORT_ID_MASK \
+ UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_PORT_ID_SFT \
+ 0
+ /* Priority recommended for RoCE traffic */
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_MASK \
+ UINT32_C(0xff0000)
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_SFT \
+ 16
+ /* none is 255 */
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_NONE \
+ (UINT32_C(0xff) << 16)
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_LAST \
+ HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_NONE
+ /* Priority recommended for L2 traffic */
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_MASK \
+ UINT32_C(0xff000000)
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_SFT \
+ 24
+ /* none is 255 */
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_NONE \
+ (UINT32_C(0xff) << 24)
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_LAST \
+ HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_NONE
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_port_conn_not_allowed (size:128b/16B) */
+struct hwrm_async_event_cmpl_port_conn_not_allowed {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_SFT \
+ 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Port connection not allowed */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_ID_PORT_CONN_NOT_ALLOWED \
+ UINT32_C(0x4)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_ID_PORT_CONN_NOT_ALLOWED
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* PORT ID */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_PORT_ID_MASK \
+ UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_PORT_ID_SFT \
+ 0
+ /*
+ * This value indicates the current port level enforcement policy
+ * for the optics module when there is an optical module mismatch
+ * and port is not connected.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_MASK \
+ UINT32_C(0xff0000)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_SFT \
+ 16
+ /* No enforcement */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_NONE \
+ (UINT32_C(0x0) << 16)
+ /* Disable Transmit side Laser. */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_DISABLETX \
+ (UINT32_C(0x1) << 16)
+ /* Raise a warning message. */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_WARNINGMSG \
+ (UINT32_C(0x2) << 16)
+ /* Power down the module. */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_PWRDOWN \
+ (UINT32_C(0x3) << 16)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_PWRDOWN
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_link_speed_cfg_not_allowed (size:128b/16B) */
+struct hwrm_async_event_cmpl_link_speed_cfg_not_allowed {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_SFT \
+ 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Link speed configuration was not allowed */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED \
+ UINT32_C(0x5)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* PORT ID */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_DATA1_PORT_ID_MASK \
+ UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_DATA1_PORT_ID_SFT \
+ 0
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_link_speed_cfg_change (size:128b/16B) */
+struct hwrm_async_event_cmpl_link_speed_cfg_change {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_SFT \
+ 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Link speed configuration change */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_ID_LINK_SPEED_CFG_CHANGE \
+ UINT32_C(0x6)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_ID_LINK_SPEED_CFG_CHANGE
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* PORT ID */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_PORT_ID_MASK \
+ UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_PORT_ID_SFT \
+ 0
+ /*
+ * If set to 1, it indicates that the supported link speeds
+ * configuration on the port has changed.
+ * If set to 0, then there is no change in supported link speeds
+ * configuration.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_SUPPORTED_LINK_SPEEDS_CHANGE \
+ UINT32_C(0x10000)
+ /*
+ * If set to 1, it indicates that the link speed configuration
+ * on the port has become illegal or invalid.
+ * If set to 0, then the link speed configuration on the port is
+ * legal or valid.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_ILLEGAL_LINK_SPEED_CFG \
+ UINT32_C(0x20000)
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_port_phy_cfg_change (size:128b/16B) */
+struct hwrm_async_event_cmpl_port_phy_cfg_change {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_SFT \
+ 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Port PHY configuration change */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_ID_PORT_PHY_CFG_CHANGE \
+ UINT32_C(0x7)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_ID_PORT_PHY_CFG_CHANGE
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* PORT ID */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_PORT_ID_MASK \
+ UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_PORT_ID_SFT \
+ 0
+ /*
+ * If set to 1, it indicates that the FEC
+ * configuration on the port has changed.
+ * If set to 0, then there is no change in FEC configuration.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_FEC_CFG_CHANGE \
+ UINT32_C(0x10000)
+ /*
+ * If set to 1, it indicates that the EEE configuration
+ * on the port has changed.
+ * If set to 0, then there is no change in EEE configuration
+ * on the port.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_EEE_CFG_CHANGE \
+ UINT32_C(0x20000)
+ /*
+ * If set to 1, it indicates that the pause configuration
+ * on the PHY has changed.
+ * If set to 0, then there is no change in the pause
+ * configuration on the PHY.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_PAUSE_CFG_CHANGE \
+ UINT32_C(0x40000)
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_reset_notify (size:128b/16B) */
+struct hwrm_async_event_cmpl_reset_notify {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Notify clients of imminent reset. */
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_ID_RESET_NOTIFY \
+ UINT32_C(0x8)
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_ID_RESET_NOTIFY
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_OPAQUE_SFT 1
+ /*
+ * 8-lsb timestamp (100-msec resolution)
+ * The Minimum time required for the Firmware readiness after sending this
+ * notification to the driver instances.
+ */
+ uint8_t timestamp_lo;
+ /*
+ * 16-lsb timestamp (100-msec resolution)
+ * The Maximum Firmware Reset bail out value in the order of 100
+ * milli seconds. The driver instances will use this value to re-initiate the
+ * registration process again if the core firmware didn’t set the ready
+ * state bit.
+ */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Indicates driver action requested */
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_SFT \
+ 0
+ /*
+ * If set to 1, it indicates that the l2 client should
+ * stop sending in band traffic to Nitro.
+ * if set to 0, there is no change in L2 client behavior.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_DRIVER_STOP_TX_QUEUE \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, it indicates that the L2 client should
+ * bring down the interface.
+ * If set to 0, then there is no change in L2 client behavior.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_DRIVER_IFDOWN \
+ UINT32_C(0x2)
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_LAST \
+ HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DRIVER_ACTION_DRIVER_IFDOWN
+ /* Indicates reason for reset. */
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_MASK \
+ UINT32_C(0xff00)
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_SFT \
+ 8
+ /* A management client has requested reset. */
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_MANAGEMENT_RESET_REQUEST \
+ (UINT32_C(0x1) << 8)
+ /* A fatal firmware exception has occurred. */
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_FW_EXCEPTION_FATAL \
+ (UINT32_C(0x2) << 8)
+ /* A non-fatal firmware exception has occurred. */
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_FW_EXCEPTION_NON_FATAL \
+ (UINT32_C(0x3) << 8)
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_FW_EXCEPTION_NON_FATAL
+ /*
+ * Minimum time before driver should attempt access - units 100ms ticks.
+ * Range 0-65535
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DELAY_IN_100MS_TICKS_MASK \
+ UINT32_C(0xffff0000)
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DELAY_IN_100MS_TICKS_SFT \
+ 16
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_error_recovery (size:128b/16B) */
+struct hwrm_async_event_cmpl_error_recovery {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /*
+ * This async notification message can be used for selecting or
+ * deselecting master function for error recovery,
+ * and to communicate to all the functions whether error recovery
+ * was enabled/disabled.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_ID_ERROR_RECOVERY \
+ UINT32_C(0x9)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_ID_ERROR_RECOVERY
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_OPAQUE_SFT 1
+ /* 8-lsb timestamp (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Indicates driver action requested */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_DATA1_FLAGS_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_DATA1_FLAGS_SFT \
+ 0
+ /*
+ * If set to 1, this function is selected as Master function.
+ * This function has responsibility to do 'chip reset' when it
+ * detects a fatal error. If set to 0, master function functionality
+ * is disabled on this function.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_DATA1_FLAGS_MASTER_FUNC \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, error recovery is enabled.
+ * If set to 0, error recovery is disabled.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_DATA1_FLAGS_RECOVERY_ENABLED \
+ UINT32_C(0x2)
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_func_drvr_unload (size:128b/16B) */
+struct hwrm_async_event_cmpl_func_drvr_unload {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Function driver unloaded */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_ID_FUNC_DRVR_UNLOAD \
+ UINT32_C(0x10)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_ID_FUNC_DRVR_UNLOAD
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Function ID */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_MASK \
+ UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_SFT \
+ 0
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_func_drvr_load (size:128b/16B) */
+struct hwrm_async_event_cmpl_func_drvr_load {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Function driver loaded */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_ID_FUNC_DRVR_LOAD \
+ UINT32_C(0x11)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_ID_FUNC_DRVR_LOAD
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Function ID */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_DATA1_FUNC_ID_MASK \
+ UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_DATA1_FUNC_ID_SFT 0
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_func_flr_proc_cmplt (size:128b/16B) */
+struct hwrm_async_event_cmpl_func_flr_proc_cmplt {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_SFT \
+ 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Function FLR related processing has completed */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_ID_FUNC_FLR_PROC_CMPLT \
+ UINT32_C(0x12)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_ID_FUNC_FLR_PROC_CMPLT
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Function ID */
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_DATA1_FUNC_ID_MASK \
+ UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_DATA1_FUNC_ID_SFT \
+ 0
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_pf_drvr_unload (size:128b/16B) */
+struct hwrm_async_event_cmpl_pf_drvr_unload {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* PF driver unloaded */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_PF_DRVR_UNLOAD \
+ UINT32_C(0x20)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_PF_DRVR_UNLOAD
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* PF ID */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_MASK \
+ UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_SFT 0
+ /* Indicates the physical port this pf belongs to */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_PORT_MASK \
+ UINT32_C(0x70000)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_PORT_SFT 16
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_pf_drvr_load (size:128b/16B) */
+struct hwrm_async_event_cmpl_pf_drvr_load {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* PF driver loaded */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_ID_PF_DRVR_LOAD \
+ UINT32_C(0x21)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_ID_PF_DRVR_LOAD
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* PF ID */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_FUNC_ID_MASK \
+ UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_FUNC_ID_SFT 0
+ /* Indicates the physical port this pf belongs to */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_PORT_MASK \
+ UINT32_C(0x70000)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_PORT_SFT 16
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_vf_flr (size:128b/16B) */
+struct hwrm_async_event_cmpl_vf_flr {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* VF Function Level Reset (FLR) */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_ID_VF_FLR UINT32_C(0x30)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_ID_VF_FLR
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* VF ID */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_VF_ID_MASK \
+ UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_VF_ID_SFT 0
+ /* Indicates the physical function this event occurred on. */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_PF_ID_MASK \
+ UINT32_C(0xff0000)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_PF_ID_SFT 16
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_vf_mac_addr_change (size:128b/16B) */
+struct hwrm_async_event_cmpl_vf_mac_addr_change {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* VF MAC Address Change */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_ID_VF_MAC_ADDR_CHANGE \
+ UINT32_C(0x31)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_ID_VF_MAC_ADDR_CHANGE
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* VF ID */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_DATA1_VF_ID_MASK \
+ UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_DATA1_VF_ID_SFT \
+ 0
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_pf_vf_comm_status_change (size:128b/16B) */
+struct hwrm_async_event_cmpl_pf_vf_comm_status_change {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_SFT \
+ 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* PF-VF communication channel status change. */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_ID_PF_VF_COMM_STATUS_CHANGE \
+ UINT32_C(0x32)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_ID_PF_VF_COMM_STATUS_CHANGE
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /*
+ * If this bit is set to 1, then it indicates that the PF-VF
+ * communication was lost and it is established.
+ * If this bit set to 0, then it indicates that the PF-VF
+ * communication was established and it is lost.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_DATA1_COMM_ESTABLISHED \
+ UINT32_C(0x1)
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_vf_cfg_change (size:128b/16B) */
+struct hwrm_async_event_cmpl_vf_cfg_change {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* VF Configuration Change */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_VF_CFG_CHANGE \
+ UINT32_C(0x33)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_VF_CFG_CHANGE
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /*
+ * Each flag provided in this field indicates a specific VF
+ * configuration change. At least one of these flags shall be set to 1
+ * when an asynchronous event completion of this type is provided
+ * by the HWRM.
+ */
+ uint32_t event_data1;
+ /*
+ * If this bit is set to 1, then the value of MTU
+ * was changed on this VF.
+ * If set to 0, then this bit should be ignored.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_MTU_CHANGE \
+ UINT32_C(0x1)
+ /*
+ * If this bit is set to 1, then the value of MRU
+ * was changed on this VF.
+ * If set to 0, then this bit should be ignored.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_MRU_CHANGE \
+ UINT32_C(0x2)
+ /*
+ * If this bit is set to 1, then the value of default MAC
+ * address was changed on this VF.
+ * If set to 0, then this bit should be ignored.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_DFLT_MAC_ADDR_CHANGE \
+ UINT32_C(0x4)
+ /*
+ * If this bit is set to 1, then the value of default VLAN
+ * was changed on this VF.
+ * If set to 0, then this bit should be ignored.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_DFLT_VLAN_CHANGE \
+ UINT32_C(0x8)
+ /*
+ * If this bit is set to 1, then the value of trusted VF enable
+ * was changed on this VF.
+ * If set to 0, then this bit should be ignored.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_TRUSTED_VF_CFG_CHANGE \
+ UINT32_C(0x10)
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_llfc_pfc_change (size:128b/16B) */
+struct hwrm_async_event_cmpl_llfc_pfc_change {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_HWRM_ASYNC_EVENT
+ /* unused1 is 10 b */
+ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_UNUSED1_MASK \
+ UINT32_C(0xffc0)
+ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_UNUSED1_SFT 6
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* LLFC/PFC Configuration Change */
+ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_ID_LLFC_PFC_CHANGE \
+ UINT32_C(0x34)
+ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_ID_LLFC_PFC_CHANGE
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Indicates llfc pfc status change */
+ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_MASK \
+ UINT32_C(0x3)
+ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_SFT \
+ 0
+ /*
+ * If this field set to 1, then it indicates that llfc is
+ * enabled.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_LLFC \
+ UINT32_C(0x1)
+ /*
+ * If this field is set to 2, then it indicates that pfc
+ * is enabled.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_PFC \
+ UINT32_C(0x2)
+ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_LAST \
+ HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_PFC
+ /* Indicates the physical port this llfc pfc change occur */
+ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_MASK \
+ UINT32_C(0x1c)
+ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_SFT \
+ 2
+ /* PORT ID */
+ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_ID_MASK \
+ UINT32_C(0x1fffe0)
+ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_ID_SFT \
+ 5
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_default_vnic_change (size:128b/16B) */
+struct hwrm_async_event_cmpl_default_vnic_change {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_SFT \
+ 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_HWRM_ASYNC_EVENT
+ /* unused1 is 10 b */
+ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_UNUSED1_MASK \
+ UINT32_C(0xffc0)
+ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_UNUSED1_SFT \
+ 6
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Notification of a default vnic allocation or free */
+ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_ALLOC_FREE_NOTIFICATION \
+ UINT32_C(0x35)
+ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_ALLOC_FREE_NOTIFICATION
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Indicates default vnic configuration change */
+ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_MASK \
+ UINT32_C(0x3)
+ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_SFT \
+ 0
+ /*
+ * If this field is set to 1, then it indicates that
+ * a default VNIC has been allocate.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_DEF_VNIC_ALLOC \
+ UINT32_C(0x1)
+ /*
+ * If this field is set to 2, then it indicates that
+ * a default VNIC has been freed.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_DEF_VNIC_FREE \
+ UINT32_C(0x2)
+ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_DEF_VNIC_FREE
+ /* Indicates the physical function this event occurred on. */
+ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_PF_ID_MASK \
+ UINT32_C(0x3fc)
+ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_PF_ID_SFT \
+ 2
+ /* Indicates the virtual function this event occurred on */
+ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_VF_ID_MASK \
+ UINT32_C(0x3fffc00)
+ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_VF_ID_SFT \
+ 10
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_hw_flow_aged (size:128b/16B) */
+struct hwrm_async_event_cmpl_hw_flow_aged {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Notification of a hw flow aged */
+ #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_ID_HW_FLOW_AGED \
+ UINT32_C(0x36)
+ #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_ID_HW_FLOW_AGED
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Indicates flow ID this event occurred on. */
+ #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_DATA1_FLOW_ID_MASK \
+ UINT32_C(0x7fffffff)
+ #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_DATA1_FLOW_ID_SFT \
+ 0
+ /* Indicates flow direction this event occurred on. */
+ #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_DATA1_FLOW_DIRECTION \
+ UINT32_C(0x80000000)
+ /*
+ * If this bit set to 0, then it indicates that the aged
+ * event was rx flow.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_DATA1_FLOW_DIRECTION_RX \
+ (UINT32_C(0x0) << 31)
+ /*
+ * If this bit is set to 1, then it indicates that the aged
+ * event was tx flow.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_DATA1_FLOW_DIRECTION_TX \
+ (UINT32_C(0x1) << 31)
+ #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_DATA1_FLOW_DIRECTION_LAST \
+ HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_DATA1_FLOW_DIRECTION_TX
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_eem_cache_flush_req (size:128b/16B) */
+struct hwrm_async_event_cmpl_eem_cache_flush_req {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_TYPE_SFT \
+ 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Notification of a eem_cache_flush request */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_EVENT_ID_EEM_CACHE_FLUSH_REQ \
+ UINT32_C(0x38)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_EVENT_ID_EEM_CACHE_FLUSH_REQ
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_eem_cache_flush_done (size:128b/16B) */
+struct hwrm_async_event_cmpl_eem_cache_flush_done {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_TYPE_SFT \
+ 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /*
+ * Notification of a host eem_cache_flush has completed. This event
+ * is generated by the host driver.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_ID_EEM_CACHE_FLUSH_DONE \
+ UINT32_C(0x39)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_ID_EEM_CACHE_FLUSH_DONE
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Indicates function ID that this event occurred on. */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_DATA1_FID_MASK \
+ UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_DATA1_FID_SFT \
+ 0
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_tcp_flag_action_change (size:128b/16B) */
+struct hwrm_async_event_cmpl_tcp_flag_action_change {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_TYPE_SFT \
+ 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Notification of tcp flag action change */
+ #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_EVENT_ID_TCP_FLAG_ACTION_CHANGE \
+ UINT32_C(0x3a)
+ #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_EVENT_ID_TCP_FLAG_ACTION_CHANGE
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_eem_flow_active (size:128b/16B) */
+struct hwrm_async_event_cmpl_eem_flow_active {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Notification of an active eem flow */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_ID_EEM_FLOW_ACTIVE \
+ UINT32_C(0x3b)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_ID_EEM_FLOW_ACTIVE
+ /* Event specific data */
+ uint32_t event_data2;
+ /* Indicates the 2nd global id this event occurred on. */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_GLOBAL_ID_2_MASK \
+ UINT32_C(0x3fffffff)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_GLOBAL_ID_2_SFT \
+ 0
+ /*
+ * Indicates flow direction of the flow identified by
+ * the global_id_2.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_FLOW_DIRECTION \
+ UINT32_C(0x40000000)
+ /* If this bit is set to 0, then it indicates that this rx flow. */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_FLOW_DIRECTION_RX \
+ (UINT32_C(0x0) << 30)
+ /* If this bit is set to 1, then it indicates that this tx flow. */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_FLOW_DIRECTION_TX \
+ (UINT32_C(0x1) << 30)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_FLOW_DIRECTION_LAST \
+ HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_FLOW_DIRECTION_TX
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Indicates the 1st global id this event occurred on. */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_GLOBAL_ID_1_MASK \
+ UINT32_C(0x3fffffff)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_GLOBAL_ID_1_SFT \
+ 0
+ /*
+ * Indicates flow direction of the flow identified by the
+ * global_id_1.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_FLOW_DIRECTION \
+ UINT32_C(0x40000000)
+ /* If this bit is set to 0, then it indicates that this is rx flow. */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_FLOW_DIRECTION_RX \
+ (UINT32_C(0x0) << 30)
+ /* If this bit is set to 1, then it indicates that this is tx flow. */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_FLOW_DIRECTION_TX \
+ (UINT32_C(0x1) << 30)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_FLOW_DIRECTION_LAST \
+ HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_FLOW_DIRECTION_TX
+ /*
+ * Indicates EEM flow aging mode this event occurred on. If
+ * this bit is set to 0, the event_data1 is the EEM global
+ * ID. If this bit is set to 1, the event_data1 is the number
+ * of global ID in the context memory.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE \
+ UINT32_C(0x80000000)
+ /* EEM flow aging mode 0. */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE_0 \
+ (UINT32_C(0x0) << 31)
+ /* EEM flow aging mode 1. */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE_1 \
+ (UINT32_C(0x1) << 31)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE_1
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_eem_cfg_change (size:128b/16B) */
+struct hwrm_async_event_cmpl_eem_cfg_change {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Notification of EEM configuration change */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_EVENT_ID_EEM_CFG_CHANGE \
+ UINT32_C(0x3c)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_EVENT_ID_EEM_CFG_CHANGE
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /*
+ * Value of 1 to indicate EEM TX configuration is enabled. Value of
+ * 0 to indicate the EEM TX configuration is disabled.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_EVENT_DATA1_EEM_TX_ENABLE \
+ UINT32_C(0x1)
+ /*
+ * Value of 1 to indicate EEM RX configuration is enabled. Value of 0
+ * to indicate the EEM RX configuration is disabled.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_EVENT_DATA1_EEM_RX_ENABLE \
+ UINT32_C(0x2)
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_quiesce_done (size:128b/16B) */
+struct hwrm_async_event_cmpl_quiesce_done {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* An event signifying completion of HWRM_FW_STATE_QUIESCE */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_ID_QUIESCE_DONE \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_ID_QUIESCE_DONE
+ /* Event specific data */
+ uint32_t event_data2;
+ /* Status of HWRM_FW_STATE_QUIESCE completion */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_SFT \
+ 0
+ /*
+ * The quiesce operation started by HWRM_FW_STATE_QUIESCE
+ * completed successfully.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_SUCCESS \
+ UINT32_C(0x0)
+ /*
+ * The quiesce operation started by HWRM_FW_STATE_QUIESCE timed
+ * out.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_TIMEOUT \
+ UINT32_C(0x1)
+ /*
+ * The quiesce operation started by HWRM_FW_STATE_QUIESCE
+ * encountered an error.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_ERROR \
+ UINT32_C(0x2)
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_LAST \
+ HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_ERROR
+ /* opaque is 8 b */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_OPAQUE_MASK \
+ UINT32_C(0xff00)
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_OPAQUE_SFT \
+ 8
+ /*
+ * Additional information about internal hardware state related to
+ * idle/quiesce state. QUIESCE may succeed per quiesce_status
+ * regardless of idle_state_flags. If QUIESCE fails, the host may
+ * inspect idle_state_flags to determine whether a retry is warranted.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_IDLE_STATE_FLAGS_MASK \
+ UINT32_C(0xff0000)
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_IDLE_STATE_FLAGS_SFT \
+ 16
+ /*
+ * Failure to quiesce is caused by host not updating the NQ consumer
+ * index.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_IDLE_STATE_FLAGS_INCOMPLETE_NQ \
+ UINT32_C(0x10000)
+ /* Flag 1 indicating partial non-idle state. */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_IDLE_STATE_FLAGS_IDLE_STATUS_1 \
+ UINT32_C(0x20000)
+ /* Flag 2 indicating partial non-idle state. */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_IDLE_STATE_FLAGS_IDLE_STATUS_2 \
+ UINT32_C(0x40000)
+ /* Flag 3 indicating partial non-idle state. */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_IDLE_STATE_FLAGS_IDLE_STATUS_3 \
+ UINT32_C(0x80000)
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Time stamp for error event */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA1_TIMESTAMP \
+ UINT32_C(0x1)
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_deferred_response (size:128b/16B) */
+struct hwrm_async_event_cmpl_deferred_response {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /*
+ * An event signifying a HWRM command is in progress and its
+ * response will be deferred
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_EVENT_ID_DEFERRED_RESPONSE \
+ UINT32_C(0x40)
+ #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_EVENT_ID_DEFERRED_RESPONSE
+ /* Event specific data */
+ uint32_t event_data2;
+ /*
+ * The PF's mailbox is clear to issue another command.
+ * A command with this seq_id is still in progress
+ * and will return a regular HWRM completion when done.
+ * 'event_data1' field, if non-zero, contains the estimated
+ * execution time for the command.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_EVENT_DATA2_SEQ_ID_MASK \
+ UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_EVENT_DATA2_SEQ_ID_SFT \
+ 0
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_DEFERRED_RESPONSE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Estimated remaining time of command execution in ms (if not zero) */
+ uint32_t event_data1;
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_pfc_watchdog_cfg_change (size:128b/16B) */
+struct hwrm_async_event_cmpl_pfc_watchdog_cfg_change {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_TYPE_SFT \
+ 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* PFC watchdog configuration change for given port/cos */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_ID_PFC_WATCHDOG_CFG_CHANGE \
+ UINT32_C(0x41)
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_ID_PFC_WATCHDOG_CFG_CHANGE
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /*
+ * 1 in bit position X indicates PFC watchdog should
+ * be on for COSX
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_SFT \
+ 0
+ /* 1 means PFC WD for COS0 is on, 0 - off. */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS0 \
+ UINT32_C(0x1)
+ /* 1 means PFC WD for COS1 is on, 0 - off. */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS1 \
+ UINT32_C(0x2)
+ /* 1 means PFC WD for COS2 is on, 0 - off. */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS2 \
+ UINT32_C(0x4)
+ /* 1 means PFC WD for COS3 is on, 0 - off. */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS3 \
+ UINT32_C(0x8)
+ /* 1 means PFC WD for COS4 is on, 0 - off. */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS4 \
+ UINT32_C(0x10)
+ /* 1 means PFC WD for COS5 is on, 0 - off. */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS5 \
+ UINT32_C(0x20)
+ /* 1 means PFC WD for COS6 is on, 0 - off. */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS6 \
+ UINT32_C(0x40)
+ /* 1 means PFC WD for COS7 is on, 0 - off. */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PFC_WD_COS_PFC_WD_COS7 \
+ UINT32_C(0x80)
+ /* PORT ID */
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PORT_ID_MASK \
+ UINT32_C(0xffff00)
+ #define HWRM_ASYNC_EVENT_CMPL_PFC_WATCHDOG_CFG_CHANGE_EVENT_DATA1_PORT_ID_SFT \
+ 8
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_fw_trace_msg (size:128b/16B) */
+struct hwrm_async_event_cmpl_fw_trace_msg {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Firmware trace log message */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_ID_FW_TRACE_MSG \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_ID_FW_TRACE_MSG
+ /* Trace byte 0 to 3 */
+ uint32_t event_data2;
+ /* Trace byte0 */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE0_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE0_SFT 0
+ /* Trace byte1 */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE1_MASK \
+ UINT32_C(0xff00)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE1_SFT 8
+ /* Trace byte2 */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE2_MASK \
+ UINT32_C(0xff0000)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE2_SFT 16
+ /* Trace byte3 */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE3_MASK \
+ UINT32_C(0xff000000)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE3_SFT 24
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_OPAQUE_SFT 1
+ /* Trace flags */
+ uint8_t timestamp_lo;
+ /* Indicates if the string is partial or complete. */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_STRING \
+ UINT32_C(0x1)
+ /* Complete string */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_STRING_COMPLETE \
+ UINT32_C(0x0)
+ /* Partial string */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_STRING_PARTIAL \
+ UINT32_C(0x1)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_STRING_LAST \
+ HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_STRING_PARTIAL
+ /* Indicates the firmware that sent the trace message. */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_FIRMWARE \
+ UINT32_C(0x2)
+ /* Primary firmware */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_FIRMWARE_PRIMARY \
+ (UINT32_C(0x0) << 1)
+ /* Secondary firmware */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_FIRMWARE_SECONDARY \
+ (UINT32_C(0x1) << 1)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_FIRMWARE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_FIRMWARE_SECONDARY
+ /* Trace byte 4 to 5 */
+ uint16_t timestamp_hi;
+ /* Trace byte4 */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_HI_BYTE4_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_HI_BYTE4_SFT 0
+ /* Trace byte5 */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_HI_BYTE5_MASK \
+ UINT32_C(0xff00)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_HI_BYTE5_SFT 8
+ /* Trace byte 6 to 9 */
+ uint32_t event_data1;
+ /* Trace byte6 */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE6_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE6_SFT 0
+ /* Trace byte7 */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE7_MASK \
+ UINT32_C(0xff00)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE7_SFT 8
+ /* Trace byte8 */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE8_MASK \
+ UINT32_C(0xff0000)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE8_SFT 16
+ /* Trace byte9 */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE9_MASK \
+ UINT32_C(0xff000000)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE9_SFT 24
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_hwrm_error (size:128b/16B) */
+struct hwrm_async_event_cmpl_hwrm_error {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* HWRM Error */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR
+ /* Event specific data */
+ uint32_t event_data2;
+ /* Severity of HWRM Error */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_SFT 0
+ /* Warning */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_WARNING \
+ UINT32_C(0x0)
+ /* Non-fatal Error */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_NONFATAL \
+ UINT32_C(0x1)
+ /* Fatal Error */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL \
+ UINT32_C(0x2)
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_LAST \
+ HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Time stamp for error event */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA1_TIMESTAMP \
+ UINT32_C(0x1)
+} __rte_packed;
+
+/*******************
+ * hwrm_func_reset *
+ *******************/
+
+
+/* hwrm_func_reset_input (size:192b/24B) */
+struct hwrm_func_reset_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the vf_id_valid field to be
+ * configured.
+ */
+ #define HWRM_FUNC_RESET_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1)
+ /*
+ * The ID of the VF that this PF is trying to reset.
+ * Only the parent PF shall be allowed to reset a child VF.
+ *
+ * A parent PF driver shall use this field only when a specific child VF
+ * is requested to be reset.
+ */
+ uint16_t vf_id;
+ /* This value indicates the level of a function reset. */
+ uint8_t func_reset_level;
+ /*
+ * Reset the caller function and its children VFs (if any). If no
+ * children functions exist, then reset the caller function only.
+ */
+ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETALL \
+ UINT32_C(0x0)
+ /* Reset the caller function only */
+ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETME \
+ UINT32_C(0x1)
+ /*
+ * Reset all children VFs of the caller function driver if the
+ * caller is a PF driver.
+ * It is an error to specify this level by a VF driver.
+ * It is an error to specify this level by a PF driver with
+ * no children VFs.
+ */
+ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETCHILDREN \
+ UINT32_C(0x2)
+ /*
+ * Reset a specific VF of the caller function driver if the caller
+ * is the parent PF driver.
+ * It is an error to specify this level by a VF driver.
+ * It is an error to specify this level by a PF driver that is not
+ * the parent of the VF that is being requested to reset.
+ */
+ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF \
+ UINT32_C(0x3)
+ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_LAST \
+ HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF
+ uint8_t unused_0;
+} __rte_packed;
+
+/* hwrm_func_reset_output (size:128b/16B) */
+struct hwrm_func_reset_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/********************
+ * hwrm_func_getfid *
+ ********************/
+
+
+/* hwrm_func_getfid_input (size:192b/24B) */
+struct hwrm_func_getfid_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the pci_id field to be
+ * configured.
+ */
+ #define HWRM_FUNC_GETFID_INPUT_ENABLES_PCI_ID UINT32_C(0x1)
+ /*
+ * This value is the PCI ID of the queried function.
+ * If ARI is enabled, then it is
+ * Bus Number (8b):Function Number(8b). Otherwise, it is
+ * Bus Number (8b):Device Number (5b):Function Number(3b).
+ */
+ uint16_t pci_id;
+ uint8_t unused_0[2];
+} __rte_packed;
+
+/* hwrm_func_getfid_output (size:128b/16B) */
+struct hwrm_func_getfid_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * FID value. This value is used to identify operations on the PCI
+ * bus as belonging to a particular PCI function.
+ */
+ uint16_t fid;
+ uint8_t unused_0[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************
+ * hwrm_func_vf_alloc *
+ **********************/
+
+
+/* hwrm_func_vf_alloc_input (size:192b/24B) */
+struct hwrm_func_vf_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the first_vf_id field to be
+ * configured.
+ */
+ #define HWRM_FUNC_VF_ALLOC_INPUT_ENABLES_FIRST_VF_ID UINT32_C(0x1)
+ /*
+ * This value is used to identify a Virtual Function (VF).
+ * The scope of VF ID is local within a PF.
+ */
+ uint16_t first_vf_id;
+ /* The number of virtual functions requested. */
+ uint16_t num_vfs;
+} __rte_packed;
+
+/* hwrm_func_vf_alloc_output (size:128b/16B) */
+struct hwrm_func_vf_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* The ID of the first VF allocated. */
+ uint16_t first_vf_id;
+ uint8_t unused_0[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*********************
+ * hwrm_func_vf_free *
+ *********************/
+
+
+/* hwrm_func_vf_free_input (size:192b/24B) */
+struct hwrm_func_vf_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the first_vf_id field to be
+ * configured.
+ */
+ #define HWRM_FUNC_VF_FREE_INPUT_ENABLES_FIRST_VF_ID UINT32_C(0x1)
+ /*
+ * This value is used to identify a Virtual Function (VF).
+ * The scope of VF ID is local within a PF.
+ */
+ uint16_t first_vf_id;
+ /*
+ * The number of virtual functions requested.
+ * 0xFFFF - Cleanup all children of this PF.
+ */
+ uint16_t num_vfs;
+} __rte_packed;
+
+/* hwrm_func_vf_free_output (size:128b/16B) */
+struct hwrm_func_vf_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/********************
+ * hwrm_func_vf_cfg *
+ ********************/
+
+
+/* hwrm_func_vf_cfg_input (size:448b/56B) */
+struct hwrm_func_vf_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the mtu field to be
+ * configured.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_MTU \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the guest_vlan field to be
+ * configured.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_GUEST_VLAN \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the async_event_cr field to be
+ * configured.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_ASYNC_EVENT_CR \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the dflt_mac_addr field to be
+ * configured.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_DFLT_MAC_ADDR \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the num_rsscos_ctxs field to be
+ * configured.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the num_cmpl_rings field to be
+ * configured.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_CMPL_RINGS \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the num_tx_rings field to be
+ * configured.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_TX_RINGS \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the num_rx_rings field to be
+ * configured.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_RX_RINGS \
+ UINT32_C(0x80)
+ /*
+ * This bit must be '1' for the num_l2_ctxs field to be
+ * configured.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_L2_CTXS \
+ UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the num_vnics field to be
+ * configured.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_VNICS \
+ UINT32_C(0x200)
+ /*
+ * This bit must be '1' for the num_stat_ctxs field to be
+ * configured.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_STAT_CTXS \
+ UINT32_C(0x400)
+ /*
+ * This bit must be '1' for the num_hw_ring_grps field to be
+ * configured.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_HW_RING_GRPS \
+ UINT32_C(0x800)
+ /*
+ * The maximum transmission unit requested on the function.
+ * The HWRM should make sure that the mtu of
+ * the function does not exceed the mtu of the physical
+ * port that this function is associated with.
+ *
+ * In addition to requesting mtu per function, it is
+ * possible to configure mtu per transmit ring.
+ * By default, the mtu of each transmit ring associated
+ * with a function is equal to the mtu of the function.
+ * The HWRM should make sure that the mtu of each transmit
+ * ring that is assigned to a function has a valid mtu.
+ */
+ uint16_t mtu;
+ /*
+ * The guest VLAN for the function being configured.
+ * This field's format is same as 802.1Q Tag's
+ * Tag Control Information (TCI) format that includes both
+ * Priority Code Point (PCP) and VLAN Identifier (VID).
+ */
+ uint16_t guest_vlan;
+ /*
+ * ID of the target completion ring for receiving asynchronous
+ * event completions. If this field is not valid, then the
+ * HWRM shall use the default completion ring of the function
+ * that is being configured as the target completion ring for
+ * providing any asynchronous event completions for that
+ * function.
+ * If this field is valid, then the HWRM shall use the
+ * completion ring identified by this ID as the target
+ * completion ring for providing any asynchronous event
+ * completions for the function that is being configured.
+ */
+ uint16_t async_event_cr;
+ /*
+ * This value is the current MAC address requested by the VF
+ * driver to be configured on this VF. A value of
+ * 00-00-00-00-00-00 indicates no MAC address configuration
+ * is requested by the VF driver.
+ * The parent PF driver may reject or overwrite this
+ * MAC address.
+ */
+ uint8_t dflt_mac_addr[6];
+ uint32_t flags;
+ /*
+ * This bit requests that the firmware test to see if all the assets
+ * requested in this command (i.e. number of TX rings) are available.
+ * The firmware will return an error if the requested assets are
+ * not available. The firwmare will NOT reserve the assets if they
+ * are available.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_TX_ASSETS_TEST \
+ UINT32_C(0x1)
+ /*
+ * This bit requests that the firmware test to see if all the assets
+ * requested in this command (i.e. number of RX rings) are available.
+ * The firmware will return an error if the requested assets are
+ * not available. The firwmare will NOT reserve the assets if they
+ * are available.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_RX_ASSETS_TEST \
+ UINT32_C(0x2)
+ /*
+ * This bit requests that the firmware test to see if all the assets
+ * requested in this command (i.e. number of CMPL rings) are available.
+ * The firmware will return an error if the requested assets are
+ * not available. The firwmare will NOT reserve the assets if they
+ * are available.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_CMPL_ASSETS_TEST \
+ UINT32_C(0x4)
+ /*
+ * This bit requests that the firmware test to see if all the assets
+ * requested in this command (i.e. number of RSS ctx) are available.
+ * The firmware will return an error if the requested assets are
+ * not available. The firwmare will NOT reserve the assets if they
+ * are available.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_RSSCOS_CTX_ASSETS_TEST \
+ UINT32_C(0x8)
+ /*
+ * This bit requests that the firmware test to see if all the assets
+ * requested in this command (i.e. number of ring groups) are available.
+ * The firmware will return an error if the requested assets are
+ * not available. The firwmare will NOT reserve the assets if they
+ * are available.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_RING_GRP_ASSETS_TEST \
+ UINT32_C(0x10)
+ /*
+ * This bit requests that the firmware test to see if all the assets
+ * requested in this command (i.e. number of stat ctx) are available.
+ * The firmware will return an error if the requested assets are
+ * not available. The firwmare will NOT reserve the assets if they
+ * are available.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_STAT_CTX_ASSETS_TEST \
+ UINT32_C(0x20)
+ /*
+ * This bit requests that the firmware test to see if all the assets
+ * requested in this command (i.e. number of VNICs) are available.
+ * The firmware will return an error if the requested assets are
+ * not available. The firwmare will NOT reserve the assets if they
+ * are available.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_VNIC_ASSETS_TEST \
+ UINT32_C(0x40)
+ /*
+ * This bit requests that the firmware test to see if all the assets
+ * requested in this command (i.e. number of L2 ctx) are available.
+ * The firmware will return an error if the requested assets are
+ * not available. The firwmare will NOT reserve the assets if they
+ * are available.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_L2_CTX_ASSETS_TEST \
+ UINT32_C(0x80)
+ /*
+ * If this bit is set to 1, the VF driver is requesting FW to enable
+ * PPP TX PUSH feature on all the TX rings specified in the
+ * num_tx_rings field. By default, the PPP TX push feature is
+ * disabled for all the TX rings of the VF. This flag is ignored if
+ * the num_tx_rings field is not specified or the VF doesn't support
+ * PPP tx push feature.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_PPP_PUSH_MODE_ENABLE \
+ UINT32_C(0x100)
+ /*
+ * If this bit is set to 1, the VF driver is requesting FW to disable
+ * PPP TX PUSH feature on all the TX rings of the VF. This flag is
+ * ignored if the VF doesn't support PPP tx push feature.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_PPP_PUSH_MODE_DISABLE \
+ UINT32_C(0x200)
+ /* The number of RSS/COS contexts requested for the VF. */
+ uint16_t num_rsscos_ctxs;
+ /* The number of completion rings requested for the VF. */
+ uint16_t num_cmpl_rings;
+ /* The number of transmit rings requested for the VF. */
+ uint16_t num_tx_rings;
+ /* The number of receive rings requested for the VF. */
+ uint16_t num_rx_rings;
+ /* The number of L2 contexts requested for the VF. */
+ uint16_t num_l2_ctxs;
+ /* The number of vnics requested for the VF. */
+ uint16_t num_vnics;
+ /* The number of statistic contexts requested for the VF. */
+ uint16_t num_stat_ctxs;
+ /* The number of HW ring groups requested for the VF. */
+ uint16_t num_hw_ring_grps;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_func_vf_cfg_output (size:128b/16B) */
+struct hwrm_func_vf_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************
+ * hwrm_func_qcaps *
+ *******************/
+
+
+/* hwrm_func_qcaps_input (size:192b/24B) */
+struct hwrm_func_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Function ID of the function that is being queried.
+ * 0xFF... (All Fs) if the query is for the requesting
+ * function.
+ * 0xFFFE (REQUESTING_PARENT_FID) This is a special FID
+ * to be used by a trusted VF to query its parent PF.
+ */
+ uint16_t fid;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_func_qcaps_output (size:704b/88B) */
+struct hwrm_func_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * FID value. This value is used to identify operations on the PCI
+ * bus as belonging to a particular PCI function.
+ */
+ uint16_t fid;
+ /*
+ * Port ID of port that this function is associated with.
+ * Valid only for the PF.
+ * 0xFF... (All Fs) if this function is not associated with
+ * any port.
+ * 0xFF... (All Fs) if this function is called from a VF.
+ */
+ uint16_t port_id;
+ uint32_t flags;
+ /* If 1, then Push mode is supported on this function. */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PUSH_MODE_SUPPORTED \
+ UINT32_C(0x1)
+ /*
+ * If 1, then the global MSI-X auto-masking is enabled for the
+ * device.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GLOBAL_MSIX_AUTOMASKING \
+ UINT32_C(0x2)
+ /*
+ * If 1, then the Precision Time Protocol (PTP) processing
+ * is supported on this function.
+ * The HWRM should enable PTP on only a single Physical
+ * Function (PF) per port.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PTP_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If 1, then RDMA over Converged Ethernet (RoCE) v1
+ * is supported on this function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V1_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * If 1, then RDMA over Converged Ethernet (RoCE) v2
+ * is supported on this function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V2_SUPPORTED \
+ UINT32_C(0x10)
+ /*
+ * If 1, then control and configuration of WoL magic packet
+ * are supported on this function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_MAGICPKT_SUPPORTED \
+ UINT32_C(0x20)
+ /*
+ * If 1, then control and configuration of bitmap pattern
+ * packet are supported on this function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_BMP_SUPPORTED \
+ UINT32_C(0x40)
+ /*
+ * If set to 1, then the control and configuration of rate limit
+ * of an allocated TX ring on the queried function is supported.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_RING_RL_SUPPORTED \
+ UINT32_C(0x80)
+ /*
+ * If 1, then control and configuration of minimum and
+ * maximum bandwidths are supported on the queried function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_BW_CFG_SUPPORTED \
+ UINT32_C(0x100)
+ /*
+ * If the query is for a VF, then this flag shall be ignored.
+ * If this query is for a PF and this flag is set to 1,
+ * then the PF has the capability to set the rate limits
+ * on the TX rings of its children VFs.
+ * If this query is for a PF and this flag is set to 0, then
+ * the PF does not have the capability to set the rate limits
+ * on the TX rings of its children VFs.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_TX_RING_RL_SUPPORTED \
+ UINT32_C(0x200)
+ /*
+ * If the query is for a VF, then this flag shall be ignored.
+ * If this query is for a PF and this flag is set to 1,
+ * then the PF has the capability to set the minimum and/or
+ * maximum bandwidths for its children VFs.
+ * If this query is for a PF and this flag is set to 0, then
+ * the PF does not have the capability to set the minimum or
+ * maximum bandwidths for its children VFs.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_BW_CFG_SUPPORTED \
+ UINT32_C(0x400)
+ /*
+ * Standard TX Ring mode is used for the allocation of TX ring
+ * and underlying scheduling resources that allow bandwidth
+ * reservation and limit settings on the queried function.
+ * If set to 1, then standard TX ring mode is supported
+ * on the queried function.
+ * If set to 0, then standard TX ring mode is not available
+ * on the queried function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_STD_TX_RING_MODE_SUPPORTED \
+ UINT32_C(0x800)
+ /*
+ * If the query is for a VF, then this flag shall be ignored,
+ * If this query is for a PF and this flag is set to 1,
+ * then the PF has the capability to detect GENEVE tunnel
+ * flags.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GENEVE_TUN_FLAGS_SUPPORTED \
+ UINT32_C(0x1000)
+ /*
+ * If the query is for a VF, then this flag shall be ignored,
+ * If this query is for a PF and this flag is set to 1,
+ * then the PF has the capability to detect NVGRE tunnel
+ * flags.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_NVGRE_TUN_FLAGS_SUPPORTED \
+ UINT32_C(0x2000)
+ /*
+ * If the query is for a VF, then this flag shall be ignored,
+ * If this query is for a PF and this flag is set to 1,
+ * then the PF has the capability to detect GRE tunnel
+ * flags.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GRE_TUN_FLAGS_SUPPORTED \
+ UINT32_C(0x4000)
+ /*
+ * If the query is for a VF, then this flag shall be ignored,
+ * If this query is for a PF and this flag is set to 1,
+ * then the PF has the capability to detect MPLS tunnel
+ * flags.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_MPLS_TUN_FLAGS_SUPPORTED \
+ UINT32_C(0x8000)
+ /*
+ * If the query is for a VF, then this flag shall be ignored,
+ * If this query is for a PF and this flag is set to 1,
+ * then the PF has the capability to support pcie stats.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PCIE_STATS_SUPPORTED \
+ UINT32_C(0x10000)
+ /*
+ * If the query is for a VF, then this flag shall be ignored,
+ * If this query is for a PF and this flag is set to 1,
+ * then the PF has the capability to adopt the VF's belonging
+ * to another PF.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ADOPTED_PF_SUPPORTED \
+ UINT32_C(0x20000)
+ /*
+ * If the query is for a VF, then this flag shall be ignored,
+ * If this query is for a PF and this flag is set to 1,
+ * then the PF has the administrative privilege to configure another PF
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ADMIN_PF_SUPPORTED \
+ UINT32_C(0x40000)
+ /*
+ * If the query is for a VF, then this flag shall be ignored.
+ * If this query is for a PF and this flag is set to 1, then
+ * the PF will know that the firmware has the capability to track
+ * the virtual link status.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_LINK_ADMIN_STATUS_SUPPORTED \
+ UINT32_C(0x80000)
+ /*
+ * If 1, then this function supports the push mode that uses
+ * write combine buffers and the long inline tx buffer descriptor.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WCB_PUSH_MODE \
+ UINT32_C(0x100000)
+ /*
+ * If 1, then FW has capability to allocate TX rings dynamically
+ * in ring alloc even if PF reserved pool is zero.
+ * This bit will be used only for PFs.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_DYNAMIC_TX_RING_ALLOC \
+ UINT32_C(0x200000)
+ /*
+ * When this bit is '1', it indicates that core firmware is
+ * capable of Hot Reset.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_HOT_RESET_CAPABLE \
+ UINT32_C(0x400000)
+ /*
+ * This flag will be set to 1 by the FW if FW supports adapter error
+ * recovery.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ERROR_RECOVERY_CAPABLE \
+ UINT32_C(0x800000)
+ /*
+ * If the query is for a VF, then this flag shall be ignored.
+ * If this query is for a PF and this flag is set to 1, then
+ * the PF has the capability to support extended stats.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_STATS_SUPPORTED \
+ UINT32_C(0x1000000)
+ /*
+ * If the query is for a VF, then this flag shall be ignored.
+ * If this query is for a PF and this flag is set to 1, then host
+ * must initiate reset or reload (or fastboot) the firmware image
+ * upon detection of device shutdown state.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ERR_RECOVER_RELOAD \
+ UINT32_C(0x2000000)
+ /*
+ * If the query is for a VF, then this flag (always set to 0) shall
+ * be ignored. If this query is for a PF and this flag is set to 1,
+ * host, when registered for the default vnic change async event,
+ * receives async notification whenever a default vnic state is
+ * changed for any of child or adopted VFs.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_NOTIFY_VF_DEF_VNIC_CHNG_SUPPORTED \
+ UINT32_C(0x4000000)
+ /* If set to 1, then the vlan acceleration for TX is disabled. */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VLAN_ACCELERATION_TX_DISABLED \
+ UINT32_C(0x8000000)
+ /*
+ * When this bit is '1', it indicates that core firmware supports
+ * DBG_COREDUMP_XXX commands.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_COREDUMP_CMD_SUPPORTED \
+ UINT32_C(0x10000000)
+ /*
+ * When this bit is '1', it indicates that core firmware supports
+ * DBG_CRASHDUMP_XXX commands.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_CRASHDUMP_CMD_SUPPORTED \
+ UINT32_C(0x20000000)
+ /*
+ * If the query is for a VF, then this flag should be ignored.
+ * If the query is for a PF and this flag is set to 1, then
+ * the PF has the capability to support retrieval of
+ * rx_port_stats_ext_pfc_wd statistics (supported by the PFC
+ * WatchDog feature) via the hwrm_port_qstats_ext_pfc_wd command.
+ * If this flag is set to 1, only that (supported) command should
+ * be used for retrieval of PFC related statistics (rather than
+ * hwrm_port_qstats_ext command, which could previously be used).
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PFC_WD_STATS_SUPPORTED \
+ UINT32_C(0x40000000)
+ /*
+ * When this bit is '1', it indicates that core firmware supports
+ * DBG_QCAPS command
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_DBG_QCAPS_CMD_SUPPORTED \
+ UINT32_C(0x80000000)
+ /*
+ * This value is current MAC address configured for this
+ * function. A value of 00-00-00-00-00-00 indicates no
+ * MAC address is currently configured.
+ */
+ uint8_t mac_address[6];
+ /*
+ * The maximum number of RSS/COS contexts that can be
+ * allocated to the function.
+ */
+ uint16_t max_rsscos_ctx;
+ /*
+ * The maximum number of completion rings that can be
+ * allocated to the function.
+ */
+ uint16_t max_cmpl_rings;
+ /*
+ * The maximum number of transmit rings that can be
+ * allocated to the function.
+ */
+ uint16_t max_tx_rings;
+ /*
+ * The maximum number of receive rings that can be
+ * allocated to the function.
+ */
+ uint16_t max_rx_rings;
+ /*
+ * The maximum number of L2 contexts that can be
+ * allocated to the function.
+ */
+ uint16_t max_l2_ctxs;
+ /*
+ * The maximum number of VNICs that can be
+ * allocated to the function.
+ */
+ uint16_t max_vnics;
+ /*
+ * The identifier for the first VF enabled on a PF. This
+ * is valid only on the PF with SR-IOV enabled.
+ * 0xFF... (All Fs) if this command is called on a PF with
+ * SR-IOV disabled or on a VF.
+ */
+ uint16_t first_vf_id;
+ /*
+ * The maximum number of VFs that can be
+ * allocated to the function. This is valid only on the
+ * PF with SR-IOV enabled. 0xFF... (All Fs) if this
+ * command is called on a PF with SR-IOV disabled or
+ * on a VF.
+ */
+ uint16_t max_vfs;
+ /*
+ * The maximum number of statistic contexts that can be
+ * allocated to the function.
+ */
+ uint16_t max_stat_ctx;
+ /*
+ * The maximum number of Encapsulation records that can be
+ * offloaded by this function.
+ */
+ uint32_t max_encap_records;
+ /*
+ * The maximum number of decapsulation records that can
+ * be offloaded by this function.
+ */
+ uint32_t max_decap_records;
+ /*
+ * The maximum number of Exact Match (EM) flows that can be
+ * offloaded by this function on the TX side.
+ */
+ uint32_t max_tx_em_flows;
+ /*
+ * The maximum number of Wildcard Match (WM) flows that can
+ * be offloaded by this function on the TX side.
+ */
+ uint32_t max_tx_wm_flows;
+ /*
+ * The maximum number of Exact Match (EM) flows that can be
+ * offloaded by this function on the RX side.
+ */
+ uint32_t max_rx_em_flows;
+ /*
+ * The maximum number of Wildcard Match (WM) flows that can
+ * be offloaded by this function on the RX side.
+ */
+ uint32_t max_rx_wm_flows;
+ /*
+ * The maximum number of multicast filters that can
+ * be supported by this function on the RX side.
+ */
+ uint32_t max_mcast_filters;
+ /*
+ * The maximum value of flow_id that can be supported
+ * in completion records.
+ */
+ uint32_t max_flow_id;
+ /*
+ * The maximum number of HW ring groups that can be
+ * supported on this function.
+ */
+ uint32_t max_hw_ring_grps;
+ /*
+ * The maximum number of strict priority transmit rings
+ * that can be allocated to the function.
+ * This number indicates the maximum number of TX rings
+ * that can be assigned strict priorities out of the
+ * maximum number of TX rings that can be allocated
+ * (max_tx_rings) to the function.
+ */
+ uint16_t max_sp_tx_rings;
+ uint8_t unused_0[2];
+ uint32_t flags_ext;
+ /*
+ * If 1, the device can be configured to set the ECN bits in the
+ * IP header of received packets if the receive queue length
+ * exceeds a given threshold.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_ECN_MARK_SUPPORTED \
+ UINT32_C(0x1)
+ /*
+ * If 1, the device can report the number of received packets
+ * that it marked as having experienced congestion.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_ECN_STATS_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If 1, the device can report extended hw statistics (including
+ * additional tpa statistics).
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_EXT_HW_STATS_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, then the core firmware has support to enable/
+ * disable hot reset support for interface dynamically through
+ * HWRM_FUNC_CFG.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_HOT_RESET_IF_SUPPORT \
+ UINT32_C(0x8)
+ /* If 1, the proxy mode is supported on this function */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_PROXY_MODE_SUPPORT \
+ UINT32_C(0x10)
+ /*
+ * If 1, the tx rings source interface override feature is supported
+ * on this function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_TX_PROXY_SRC_INTF_OVERRIDE_SUPPORT \
+ UINT32_C(0x20)
+ /*
+ * If 1, the device supports scheduler queues. SCHQs can be managed
+ * using RING_SCHQ_ALLOC/CFG/FREE commands.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_SCHQ_SUPPORTED \
+ UINT32_C(0x40)
+ /*
+ * If set to 1, then this function supports the TX push mode that
+ * uses ping-pong buffers from the push pages.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_PPP_PUSH_MODE_SUPPORTED \
+ UINT32_C(0x80)
+ /* The maximum number of SCHQs supported by this device. */
+ uint8_t max_schqs;
+ uint8_t unused_1[2];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************
+ * hwrm_func_qcfg *
+ ******************/
+
+
+/* hwrm_func_qcfg_input (size:192b/24B) */
+struct hwrm_func_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Function ID of the function that is being queried.
+ * 0xFF... (All Fs) if the query is for the requesting
+ * function.
+ * 0xFFFE (REQUESTING_PARENT_FID) This is a special FID
+ * to be used by a trusted VF to query its parent PF.
+ */
+ uint16_t fid;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_func_qcfg_output (size:768b/96B) */
+struct hwrm_func_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * FID value. This value is used to identify operations on the PCI
+ * bus as belonging to a particular PCI function.
+ */
+ uint16_t fid;
+ /*
+ * Port ID of port that this function is associated with.
+ * 0xFF... (All Fs) if this function is not associated with
+ * any port.
+ */
+ uint16_t port_id;
+ /*
+ * This value is the current VLAN setting for this
+ * function. The value of 0 for this field indicates
+ * no priority tagging or VLAN is used.
+ * This field's format is same as 802.1Q Tag's
+ * Tag Control Information (TCI) format that includes both
+ * Priority Code Point (PCP) and VLAN Identifier (VID).
+ */
+ uint16_t vlan;
+ uint16_t flags;
+ /*
+ * If 1, then magic packet based Out-Of-Box WoL is enabled on
+ * the port associated with this function.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_MAGICPKT_ENABLED \
+ UINT32_C(0x1)
+ /*
+ * If 1, then bitmap pattern based Out-Of-Box WoL packet is enabled
+ * on the port associated with this function.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_BMP_ENABLED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, then FW based DCBX agent is enabled and running on
+ * the port associated with this function.
+ * If set to 0, then DCBX agent is not running in the firmware.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_FW_DCBX_AGENT_ENABLED \
+ UINT32_C(0x4)
+ /*
+ * Standard TX Ring mode is used for the allocation of TX ring
+ * and underlying scheduling resources that allow bandwidth
+ * reservation and limit settings on the queried function.
+ * If set to 1, then standard TX ring mode is enabled
+ * on the queried function.
+ * If set to 0, then the standard TX ring mode is disabled
+ * on the queried function. In this extended TX ring resource
+ * mode, the minimum and maximum bandwidth settings are not
+ * supported to allow the allocation of TX rings to span multiple
+ * scheduler nodes.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_STD_TX_RING_MODE_ENABLED \
+ UINT32_C(0x8)
+ /*
+ * If set to 1 then FW based LLDP agent is enabled and running on
+ * the port associated with this function.
+ * If set to 0 then the LLDP agent is not running in the firmware.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_FW_LLDP_AGENT_ENABLED \
+ UINT32_C(0x10)
+ /*
+ * If set to 1, then multi-host mode is active for this function.
+ * If set to 0, then multi-host mode is inactive for this function
+ * or not applicable for this device.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_MULTI_HOST \
+ UINT32_C(0x20)
+ /*
+ * If the function that is being queried is a PF, then the HWRM shall
+ * set this field to 0 and the HWRM client shall ignore this field.
+ * If the function that is being queried is a VF, then the HWRM shall
+ * set this field to 1 if the queried VF is trusted, otherwise the HWRM
+ * shall set this field to 0.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_TRUSTED_VF \
+ UINT32_C(0x40)
+ /*
+ * If set to 1, then secure mode is enabled for this function or device.
+ * If set to 0, then secure mode is disabled (or normal mode) for this
+ * function or device.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_SECURE_MODE_ENABLED \
+ UINT32_C(0x80)
+ /*
+ * If set to 1, then this PF is enabled with a preboot driver that
+ * requires access to the legacy L2 ring model and legacy 32b
+ * doorbells. If set to 0, then this PF is not allowed to use
+ * the legacy L2 rings. This feature is not allowed on VFs and
+ * is only relevant for devices that require a context backing
+ * store.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_PREBOOT_LEGACY_L2_RINGS \
+ UINT32_C(0x100)
+ /*
+ * If set to 1, then the firmware and all currently registered driver
+ * instances support hot reset. The hot reset support will be updated
+ * dynamically based on the driver interface advertisement.
+ * If set to 0, then the adapter is not currently able to initiate
+ * hot reset.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_HOT_RESET_ALLOWED \
+ UINT32_C(0x200)
+ /*
+ * If set to 1, then the PPP tx push mode is enabled for all the
+ * reserved TX rings of this function. If set to 0, then PPP tx push
+ * mode is disabled for all the reserved TX rings of this function.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_PPP_PUSH_MODE_ENABLED \
+ UINT32_C(0x400)
+ /*
+ * This value is current MAC address configured for this
+ * function. A value of 00-00-00-00-00-00 indicates no
+ * MAC address is currently configured.
+ */
+ uint8_t mac_address[6];
+ /*
+ * This value is current PCI ID of this
+ * function. If ARI is enabled, then it is
+ * Bus Number (8b):Function Number(8b). Otherwise, it is
+ * Bus Number (8b):Device Number (4b):Function Number(4b).
+ * If multi-host mode is active, the 4 lsb will indicate
+ * the PF index for this function.
+ */
+ uint16_t pci_id;
+ /*
+ * The number of RSS/COS contexts currently
+ * allocated to the function.
+ */
+ uint16_t alloc_rsscos_ctx;
+ /*
+ * The number of completion rings currently allocated to
+ * the function. This does not include the rings allocated
+ * to any children functions if any.
+ */
+ uint16_t alloc_cmpl_rings;
+ /*
+ * The number of transmit rings currently allocated to
+ * the function. This does not include the rings allocated
+ * to any children functions if any.
+ */
+ uint16_t alloc_tx_rings;
+ /*
+ * The number of receive rings currently allocated to
+ * the function. This does not include the rings allocated
+ * to any children functions if any.
+ */
+ uint16_t alloc_rx_rings;
+ /* The allocated number of L2 contexts to the function. */
+ uint16_t alloc_l2_ctx;
+ /* The allocated number of vnics to the function. */
+ uint16_t alloc_vnics;
+ /*
+ * The maximum transmission unit of the function.
+ * If the reported mtu value is non-zero then it will used for the
+ * rings allocated on this function. otherwise the default
+ * value is used if ring MTU is not specified.
+ */
+ uint16_t mtu;
+ /*
+ * The maximum receive unit of the function.
+ * For vnics allocated on this function, this default
+ * value is used if vnic MRU is not specified.
+ */
+ uint16_t mru;
+ /* The statistics context assigned to a function. */
+ uint16_t stat_ctx_id;
+ /*
+ * The HWRM shall return Unknown value for this field
+ * when this command is used to query VF's configuration.
+ */
+ uint8_t port_partition_type;
+ /* Single physical function */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_SPF UINT32_C(0x0)
+ /* Multiple physical functions */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_MPFS UINT32_C(0x1)
+ /* Network Partitioning 1.0 */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_0 UINT32_C(0x2)
+ /* Network Partitioning 1.5 */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_5 UINT32_C(0x3)
+ /* Network Partitioning 2.0 */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR2_0 UINT32_C(0x4)
+ /* Unknown */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_UNKNOWN \
+ UINT32_C(0xff)
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_LAST \
+ HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_UNKNOWN
+ /*
+ * This field will indicate number of physical functions on this port_partition.
+ * HWRM shall return unavail (i.e. value of 0) for this field
+ * when this command is used to query VF's configuration or
+ * from older firmware that doesn't support this field.
+ */
+ uint8_t port_pf_cnt;
+ /* number of PFs is not available */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PF_CNT_UNAVAIL UINT32_C(0x0)
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PF_CNT_LAST \
+ HWRM_FUNC_QCFG_OUTPUT_PORT_PF_CNT_UNAVAIL
+ /*
+ * The default VNIC ID assigned to a function that is
+ * being queried.
+ */
+ uint16_t dflt_vnic_id;
+ uint16_t max_mtu_configured;
+ /*
+ * Minimum BW allocated for this function.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for the scheduler inside the device.
+ * A value of 0 indicates the minimum bandwidth is not
+ * configured.
+ */
+ uint32_t min_bw;
+ /* The bandwidth value. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_SFT 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_LAST \
+ HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_SFT 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated for this function.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for the scheduler inside the device.
+ * A value of 0 indicates that the maximum bandwidth is not
+ * configured.
+ */
+ uint32_t max_bw;
+ /* The bandwidth value. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_SFT 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_LAST \
+ HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_SFT 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * This value indicates the Edge virtual bridge mode for the
+ * domain that this function belongs to.
+ */
+ uint8_t evb_mode;
+ /* No Edge Virtual Bridging (EVB) */
+ #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_NO_EVB UINT32_C(0x0)
+ /* Virtual Ethernet Bridge (VEB) */
+ #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEB UINT32_C(0x1)
+ /* Virtual Ethernet Port Aggregator (VEPA) */
+ #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEPA UINT32_C(0x2)
+ #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_LAST \
+ HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEPA
+ uint8_t options;
+ /*
+ * This value indicates the PCIE device cache line size.
+ * The cache line size allows the DMA writes to terminate and
+ * start at the cache boundary.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_MASK \
+ UINT32_C(0x3)
+ #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_SFT 0
+ /* Cache Line Size 64 bytes */
+ #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_SIZE_64 \
+ UINT32_C(0x0)
+ /* Cache Line Size 128 bytes */
+ #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_SIZE_128 \
+ UINT32_C(0x1)
+ #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_LAST \
+ HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_SIZE_128
+ /* This value is the virtual link admin state setting. */
+ #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_MASK \
+ UINT32_C(0xc)
+ #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_SFT 2
+ /* Admin link state is in forced down mode. */
+ #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_FORCED_DOWN \
+ (UINT32_C(0x0) << 2)
+ /* Admin link state is in forced up mode. */
+ #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_FORCED_UP \
+ (UINT32_C(0x1) << 2)
+ /* Admin link state is in auto mode - follows the physical link state. */
+ #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_AUTO \
+ (UINT32_C(0x2) << 2)
+ #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_LAST \
+ HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_AUTO
+ /* Reserved for future. */
+ #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_RSVD_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_RSVD_SFT 4
+ /*
+ * The number of VFs that are allocated to the function.
+ * This is valid only on the PF with SR-IOV enabled.
+ * 0xFF... (All Fs) if this command is called on a PF with
+ * SR-IOV disabled or on a VF.
+ */
+ uint16_t alloc_vfs;
+ /*
+ * The number of allocated multicast filters for this
+ * function on the RX side.
+ */
+ uint32_t alloc_mcast_filters;
+ /*
+ * The number of allocated HW ring groups for this
+ * function.
+ */
+ uint32_t alloc_hw_ring_grps;
+ /*
+ * The number of strict priority transmit rings out of
+ * currently allocated TX rings to the function
+ * (alloc_tx_rings).
+ */
+ uint16_t alloc_sp_tx_rings;
+ /*
+ * The number of statistics contexts
+ * currently reserved for the function.
+ */
+ uint16_t alloc_stat_ctx;
+ /*
+ * This field specifies how many NQs are reserved for the PF.
+ * Remaining NQs that belong to the PF are available for VFs.
+ * Once a PF has created VFs, it cannot change how many NQs are
+ * reserved for itself (since the NQs must be contiguous in HW).
+ */
+ uint16_t alloc_msix;
+ /*
+ * The number of registered VF’s associated with the PF. This field
+ * should be ignored when the request received on the VF interface.
+ * This field will be updated on the PF interface to initiate
+ * the unregister request on PF in the HOT Reset Process.
+ */
+ uint16_t registered_vfs;
+ /*
+ * The size of the doorbell BAR in KBytes reserved for L2 including
+ * any area that is shared between L2 and RoCE. The L2 driver
+ * should only map the L2 portion of the doorbell BAR. Any rounding
+ * of the BAR size to the native CPU page size should be performed
+ * by the driver. If the value is zero, no special partitioning
+ * of the doorbell BAR between L2 and RoCE is required.
+ */
+ uint16_t l2_doorbell_bar_size_kb;
+ uint8_t unused_1;
+ /*
+ * For backward compatibility this field must be set to 1.
+ * Older drivers might look for this field to be 1 before
+ * processing the message.
+ */
+ uint8_t always_1;
+ /*
+ * This GRC address location is used by the Host driver interfaces to poll
+ * the adapter ready state to re-initiate the registration process again
+ * after receiving the RESET Notify event.
+ */
+ uint32_t reset_addr_poll;
+ /*
+ * This field specifies legacy L2 doorbell size in KBytes. Drivers should use
+ * this value to find out the doorbell page offset from the BAR.
+ */
+ uint16_t legacy_l2_db_size_kb;
+ uint16_t svif_info;
+ /*
+ * This field specifies the source virtual interface of the function being
+ * queried. Drivers can use this to program svif field in the L2 context
+ * table
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_SVIF_INFO_SVIF_MASK UINT32_C(0x7fff)
+ #define HWRM_FUNC_QCFG_OUTPUT_SVIF_INFO_SVIF_SFT 0
+ /* This field specifies whether svif is valid or not */
+ #define HWRM_FUNC_QCFG_OUTPUT_SVIF_INFO_SVIF_VALID UINT32_C(0x8000)
+ uint8_t unused_2[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*****************
+ * hwrm_func_cfg *
+ *****************/
+
+
+/* hwrm_func_cfg_input (size:768b/96B) */
+struct hwrm_func_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Function ID of the function that is being
+ * configured.
+ * If set to 0xFF... (All Fs), then the the configuration is
+ * for the requesting function.
+ */
+ uint16_t fid;
+ /*
+ * This field specifies how many NQs will be reserved for the PF.
+ * Remaining NQs that belong to the PF become available for VFs.
+ * Once a PF has created VFs, it cannot change how many NQs are
+ * reserved for itself (since the NQs must be contiguous in HW).
+ */
+ uint16_t num_msix;
+ uint32_t flags;
+ /*
+ * When this bit is '1', the function is disabled with
+ * source MAC address check.
+ * This is an anti-spoofing check. If this flag is set,
+ * then the function shall be configured to disallow
+ * transmission of frames with the source MAC address that
+ * is configured for this function.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_DISABLE \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', the function is enabled with
+ * source MAC address check.
+ * This is an anti-spoofing check. If this flag is set,
+ * then the function shall be configured to allow
+ * transmission of frames with the source MAC address that
+ * is configured for this function.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_ENABLE \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_RSVD_MASK \
+ UINT32_C(0x1fc)
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_RSVD_SFT 2
+ /*
+ * Standard TX Ring mode is used for the allocation of TX ring
+ * and underlying scheduling resources that allow bandwidth
+ * reservation and limit settings on the queried function.
+ * If set to 1, then standard TX ring mode is requested to be
+ * enabled on the function being configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_ENABLE \
+ UINT32_C(0x200)
+ /*
+ * Standard TX Ring mode is used for the allocation of TX ring
+ * and underlying scheduling resources that allow bandwidth
+ * reservation and limit settings on the queried function.
+ * If set to 1, then the standard TX ring mode is requested to
+ * be disabled on the function being configured. In this extended
+ * TX ring resource mode, the minimum and maximum bandwidth settings
+ * are not supported to allow the allocation of TX rings to
+ * span multiple scheduler nodes.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_DISABLE \
+ UINT32_C(0x400)
+ /*
+ * If this bit is set, virtual mac address configured
+ * in this command will be persistent over warm boot.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_VIRT_MAC_PERSIST \
+ UINT32_C(0x800)
+ /*
+ * This bit only applies to the VF. If this bit is set, the statistic
+ * context counters will not be cleared when the statistic context is freed
+ * or a function reset is called on VF. This bit will be cleared when the PF
+ * is unloaded or a function reset is called on the PF.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_NO_AUTOCLEAR_STATISTIC \
+ UINT32_C(0x1000)
+ /*
+ * This bit requests that the firmware test to see if all the assets
+ * requested in this command (i.e. number of TX rings) are available.
+ * The firmware will return an error if the requested assets are
+ * not available. The firwmare will NOT reserve the assets if they
+ * are available.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_TX_ASSETS_TEST \
+ UINT32_C(0x2000)
+ /*
+ * This bit requests that the firmware test to see if all the assets
+ * requested in this command (i.e. number of RX rings) are available.
+ * The firmware will return an error if the requested assets are
+ * not available. The firwmare will NOT reserve the assets if they
+ * are available.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_RX_ASSETS_TEST \
+ UINT32_C(0x4000)
+ /*
+ * This bit requests that the firmware test to see if all the assets
+ * requested in this command (i.e. number of CMPL rings) are available.
+ * The firmware will return an error if the requested assets are
+ * not available. The firwmare will NOT reserve the assets if they
+ * are available.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_CMPL_ASSETS_TEST \
+ UINT32_C(0x8000)
+ /*
+ * This bit requests that the firmware test to see if all the assets
+ * requested in this command (i.e. number of RSS ctx) are available.
+ * The firmware will return an error if the requested assets are
+ * not available. The firwmare will NOT reserve the assets if they
+ * are available.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_RSSCOS_CTX_ASSETS_TEST \
+ UINT32_C(0x10000)
+ /*
+ * This bit requests that the firmware test to see if all the assets
+ * requested in this command (i.e. number of ring groups) are available.
+ * The firmware will return an error if the requested assets are
+ * not available. The firwmare will NOT reserve the assets if they
+ * are available.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_RING_GRP_ASSETS_TEST \
+ UINT32_C(0x20000)
+ /*
+ * This bit requests that the firmware test to see if all the assets
+ * requested in this command (i.e. number of stat ctx) are available.
+ * The firmware will return an error if the requested assets are
+ * not available. The firwmare will NOT reserve the assets if they
+ * are available.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_STAT_CTX_ASSETS_TEST \
+ UINT32_C(0x40000)
+ /*
+ * This bit requests that the firmware test to see if all the assets
+ * requested in this command (i.e. number of VNICs) are available.
+ * The firmware will return an error if the requested assets are
+ * not available. The firwmare will NOT reserve the assets if they
+ * are available.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_VNIC_ASSETS_TEST \
+ UINT32_C(0x80000)
+ /*
+ * This bit requests that the firmware test to see if all the assets
+ * requested in this command (i.e. number of L2 ctx) are available.
+ * The firmware will return an error if the requested assets are
+ * not available. The firwmare will NOT reserve the assets if they
+ * are available.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_L2_CTX_ASSETS_TEST \
+ UINT32_C(0x100000)
+ /*
+ * This configuration change can be initiated by a PF driver. This
+ * configuration request shall be targeted to a VF. From local host
+ * resident HWRM clients, only the parent PF driver shall be allowed
+ * to initiate this change on one of its children VFs. If this bit is
+ * set to 1, then the VF that is being configured is requested to be
+ * trusted.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_TRUSTED_VF_ENABLE \
+ UINT32_C(0x200000)
+ /*
+ * When this bit it set, even if PF reserved pool size is zero,
+ * FW will allow driver to create TX rings in ring alloc,
+ * by reserving TX ring, S3 node dynamically.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_DYNAMIC_TX_RING_ALLOC \
+ UINT32_C(0x400000)
+ /*
+ * This bit requests that the firmware test to see if all the assets
+ * requested in this command (i.e. number of NQ rings) are available.
+ * The firmware will return an error if the requested assets are
+ * not available. The firwmare will NOT reserve the assets if they
+ * are available.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_NQ_ASSETS_TEST \
+ UINT32_C(0x800000)
+ /*
+ * This configuration change can be initiated by a PF driver. This
+ * configuration request shall be targeted to a VF. From local host
+ * resident HWRM clients, only the parent PF driver shall be allowed
+ * to initiate this change on one of its children VFs. If this bit is
+ * set to 1, then the VF that is being configured is requested to be
+ * untrusted.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_TRUSTED_VF_DISABLE \
+ UINT32_C(0x1000000)
+ /*
+ * This bit is used by preboot drivers on a PF that require access
+ * to the legacy L2 ring model and legacy 32b doorbells. This
+ * feature is not allowed on VFs and is only relevant for devices
+ * that require a context backing store.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_PREBOOT_LEGACY_L2_RINGS \
+ UINT32_C(0x2000000)
+ /*
+ * If this bit is set to 0, then the interface does not support hot
+ * reset capability which it advertised with the hot_reset_support
+ * flag in HWRM_FUNC_DRV_RGTR. If any of the function has set this
+ * flag to 0, adapter cannot do the hot reset. In this state, if the
+ * firmware receives a hot reset request, firmware must fail the
+ * request. If this bit is set to 1, then interface is renabling the
+ * hot reset capability.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_HOT_RESET_IF_EN_DIS \
+ UINT32_C(0x4000000)
+ /*
+ * If this bit is set to 1, the PF driver is requesting FW
+ * to enable PPP TX PUSH feature on all the TX rings specified in
+ * the num_tx_rings field. By default, the PPP TX push feature is
+ * disabled for all the TX rings of the function. This flag is
+ * ignored if num_tx_rings field is not specified or the function
+ * doesn't support PPP tx push feature.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_PPP_PUSH_MODE_ENABLE \
+ UINT32_C(0x8000000)
+ /*
+ * If this bit is set to 1, the PF driver is requesting FW
+ * to disable PPP TX PUSH feature on all the TX rings specified in
+ * the num_tx_rings field. This flag is ignored if num_tx_rings
+ * field is not specified or the function doesn't support PPP tx
+ * push feature.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_PPP_PUSH_MODE_DISABLE \
+ UINT32_C(0x10000000)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the mtu field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_MTU \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the mru field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_MRU \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the num_rsscos_ctxs field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the num_cmpl_rings field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_CMPL_RINGS \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the num_tx_rings field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_TX_RINGS \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the num_rx_rings field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RX_RINGS \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the num_l2_ctxs field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_L2_CTXS \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the num_vnics field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_VNICS \
+ UINT32_C(0x80)
+ /*
+ * This bit must be '1' for the num_stat_ctxs field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_STAT_CTXS \
+ UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the dflt_mac_addr field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_MAC_ADDR \
+ UINT32_C(0x200)
+ /*
+ * This bit must be '1' for the dflt_vlan field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_VLAN \
+ UINT32_C(0x400)
+ /*
+ * This bit must be '1' for the dflt_ip_addr field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_IP_ADDR \
+ UINT32_C(0x800)
+ /*
+ * This bit must be '1' for the min_bw field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_MIN_BW \
+ UINT32_C(0x1000)
+ /*
+ * This bit must be '1' for the max_bw field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_MAX_BW \
+ UINT32_C(0x2000)
+ /*
+ * This bit must be '1' for the async_event_cr field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_ASYNC_EVENT_CR \
+ UINT32_C(0x4000)
+ /*
+ * This bit must be '1' for the vlan_antispoof_mode field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_VLAN_ANTISPOOF_MODE \
+ UINT32_C(0x8000)
+ /*
+ * This bit must be '1' for the allowed_vlan_pris field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_ALLOWED_VLAN_PRIS \
+ UINT32_C(0x10000)
+ /*
+ * This bit must be '1' for the evb_mode field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_EVB_MODE \
+ UINT32_C(0x20000)
+ /*
+ * This bit must be '1' for the num_mcast_filters field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_MCAST_FILTERS \
+ UINT32_C(0x40000)
+ /*
+ * This bit must be '1' for the num_hw_ring_grps field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_HW_RING_GRPS \
+ UINT32_C(0x80000)
+ /*
+ * This bit must be '1' for the cache_linesize field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_CACHE_LINESIZE \
+ UINT32_C(0x100000)
+ /*
+ * This bit must be '1' for the num_msix field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_MSIX \
+ UINT32_C(0x200000)
+ /*
+ * This bit must be '1' for the link admin state field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_ADMIN_LINK_STATE \
+ UINT32_C(0x400000)
+ /*
+ * This bit must be '1' for the hot_reset_if_en_dis field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_HOT_RESET_IF_SUPPORT \
+ UINT32_C(0x800000)
+ /*
+ * This bit must be '1' for the schq_id field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_SCHQ_ID \
+ UINT32_C(0x1000000)
+ /*
+ * The maximum transmission unit of the function.
+ * The HWRM should make sure that the mtu of
+ * the function does not exceed the mtu of the physical
+ * port that this function is associated with.
+ *
+ * In addition to configuring mtu per function, it is
+ * possible to configure mtu per transmit ring.
+ * By default, the mtu of each transmit ring associated
+ * with a function is equal to the mtu of the function.
+ * The HWRM should make sure that the mtu of each transmit
+ * ring that is assigned to a function has a valid mtu.
+ */
+ uint16_t mtu;
+ /*
+ * The maximum receive unit of the function.
+ * The HWRM should make sure that the mru of
+ * the function does not exceed the mru of the physical
+ * port that this function is associated with.
+ *
+ * In addition to configuring mru per function, it is
+ * possible to configure mru per vnic.
+ * By default, the mru of each vnic associated
+ * with a function is equal to the mru of the function.
+ * The HWRM should make sure that the mru of each vnic
+ * that is assigned to a function has a valid mru.
+ */
+ uint16_t mru;
+ /*
+ * The number of RSS/COS contexts requested for the
+ * function.
+ */
+ uint16_t num_rsscos_ctxs;
+ /*
+ * The number of completion rings requested for the
+ * function. This does not include the rings allocated
+ * to any children functions if any.
+ */
+ uint16_t num_cmpl_rings;
+ /*
+ * The number of transmit rings requested for the function.
+ * This does not include the rings allocated to any
+ * children functions if any.
+ */
+ uint16_t num_tx_rings;
+ /*
+ * The number of receive rings requested for the function.
+ * This does not include the rings allocated
+ * to any children functions if any.
+ */
+ uint16_t num_rx_rings;
+ /* The requested number of L2 contexts for the function. */
+ uint16_t num_l2_ctxs;
+ /* The requested number of vnics for the function. */
+ uint16_t num_vnics;
+ /* The requested number of statistic contexts for the function. */
+ uint16_t num_stat_ctxs;
+ /*
+ * The number of HW ring groups that should
+ * be reserved for this function.
+ */
+ uint16_t num_hw_ring_grps;
+ /* The default MAC address for the function being configured. */
+ uint8_t dflt_mac_addr[6];
+ /*
+ * The default VLAN for the function being configured.
+ * This field's format is same as 802.1Q Tag's
+ * Tag Control Information (TCI) format that includes both
+ * Priority Code Point (PCP) and VLAN Identifier (VID).
+ */
+ uint16_t dflt_vlan;
+ /*
+ * The default IP address for the function being configured.
+ * This address is only used in enabling source property check.
+ */
+ uint32_t dflt_ip_addr[4];
+ /*
+ * Minimum BW allocated for this function.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for the scheduler inside the device.
+ */
+ uint32_t min_bw;
+ /* The bandwidth value. */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_SFT 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_LAST \
+ HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_SFT 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated for this function.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for the scheduler inside the device.
+ */
+ uint32_t max_bw;
+ /* The bandwidth value. */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_SFT 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_LAST \
+ HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_SFT 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * ID of the target completion ring for receiving asynchronous
+ * event completions. If this field is not valid, then the
+ * HWRM shall use the default completion ring of the function
+ * that is being configured as the target completion ring for
+ * providing any asynchronous event completions for that
+ * function.
+ * If this field is valid, then the HWRM shall use the
+ * completion ring identified by this ID as the target
+ * completion ring for providing any asynchronous event
+ * completions for the function that is being configured.
+ */
+ uint16_t async_event_cr;
+ /* VLAN Anti-spoofing mode. */
+ uint8_t vlan_antispoof_mode;
+ /* No VLAN anti-spoofing checks are enabled */
+ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_NOCHECK \
+ UINT32_C(0x0)
+ /* Validate VLAN against the configured VLAN(s) */
+ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_VALIDATE_VLAN \
+ UINT32_C(0x1)
+ /* Insert VLAN if it does not exist, otherwise discard */
+ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_IF_VLANDNE \
+ UINT32_C(0x2)
+ /* Insert VLAN if it does not exist, override VLAN if it exists */
+ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_OR_OVERRIDE_VLAN \
+ UINT32_C(0x3)
+ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_LAST \
+ HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_OR_OVERRIDE_VLAN
+ /*
+ * This bit field defines VLAN PRIs that are allowed on
+ * this function.
+ * If nth bit is set, then VLAN PRI n is allowed on this
+ * function.
+ */
+ uint8_t allowed_vlan_pris;
+ /*
+ * The HWRM shall allow a PF driver to change EVB mode for the
+ * partition it belongs to.
+ * The HWRM shall not allow a VF driver to change the EVB mode.
+ * The HWRM shall take into account the switching of EVB mode
+ * from one to another and reconfigure hardware resources as
+ * appropriately.
+ * The switching from VEB to VEPA mode requires
+ * the disabling of the loopback traffic. Additionally,
+ * source knock outs are handled differently in VEB and VEPA
+ * modes.
+ */
+ uint8_t evb_mode;
+ /* No Edge Virtual Bridging (EVB) */
+ #define HWRM_FUNC_CFG_INPUT_EVB_MODE_NO_EVB UINT32_C(0x0)
+ /* Virtual Ethernet Bridge (VEB) */
+ #define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEB UINT32_C(0x1)
+ /* Virtual Ethernet Port Aggregator (VEPA) */
+ #define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEPA UINT32_C(0x2)
+ #define HWRM_FUNC_CFG_INPUT_EVB_MODE_LAST \
+ HWRM_FUNC_CFG_INPUT_EVB_MODE_VEPA
+ uint8_t options;
+ /*
+ * This value indicates the PCIE device cache line size.
+ * The cache line size allows the DMA writes to terminate and
+ * start at the cache boundary.
+ */
+ #define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_MASK \
+ UINT32_C(0x3)
+ #define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_SFT 0
+ /* Cache Line Size 64 bytes */
+ #define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_SIZE_64 \
+ UINT32_C(0x0)
+ /* Cache Line Size 128 bytes */
+ #define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_SIZE_128 \
+ UINT32_C(0x1)
+ #define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_LAST \
+ HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_SIZE_128
+ /* This value is the virtual link admin state setting. */
+ #define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_MASK \
+ UINT32_C(0xc)
+ #define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_SFT 2
+ /* Admin state is forced down. */
+ #define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_FORCED_DOWN \
+ (UINT32_C(0x0) << 2)
+ /* Admin state is forced up. */
+ #define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_FORCED_UP \
+ (UINT32_C(0x1) << 2)
+ /* Admin state is in auto mode - is to follow the physical link state. */
+ #define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_AUTO \
+ (UINT32_C(0x2) << 2)
+ #define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_LAST \
+ HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_AUTO
+ /* Reserved for future. */
+ #define HWRM_FUNC_CFG_INPUT_OPTIONS_RSVD_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_CFG_INPUT_OPTIONS_RSVD_SFT 4
+ /*
+ * The number of multicast filters that should
+ * be reserved for this function on the RX side.
+ */
+ uint16_t num_mcast_filters;
+ /* Used by a PF driver to associate a SCHQ with a VF. */
+ uint16_t schq_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_func_cfg_output (size:128b/16B) */
+struct hwrm_func_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/********************
+ * hwrm_func_qstats *
+ ********************/
+
+
+/* hwrm_func_qstats_input (size:192b/24B) */
+struct hwrm_func_qstats_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Function ID of the function that is being queried.
+ * 0xFF... (All Fs) if the query is for the requesting
+ * function.
+ * A privileged PF can query for other function's statistics.
+ */
+ uint16_t fid;
+ /* This flags indicates the type of statistics request. */
+ uint8_t flags;
+ /* This value is not used to avoid backward compatibility issues. */
+ #define HWRM_FUNC_QSTATS_INPUT_FLAGS_UNUSED UINT32_C(0x0)
+ /*
+ * flags should be set to 1 when request is for only RoCE statistics.
+ * This will be honored only if the caller_fid is a privileged PF.
+ * In all other cases FID and caller_fid should be the same.
+ */
+ #define HWRM_FUNC_QSTATS_INPUT_FLAGS_ROCE_ONLY UINT32_C(0x1)
+ /*
+ * flags should be set to 2 when request is for the counter mask,
+ * representing the width of each of the stats counters, rather
+ * than counters themselves.
+ */
+ #define HWRM_FUNC_QSTATS_INPUT_FLAGS_COUNTER_MASK UINT32_C(0x2)
+ #define HWRM_FUNC_QSTATS_INPUT_FLAGS_LAST \
+ HWRM_FUNC_QSTATS_INPUT_FLAGS_COUNTER_MASK
+ uint8_t unused_0[5];
+} __rte_packed;
+
+/* hwrm_func_qstats_output (size:1408b/176B) */
+struct hwrm_func_qstats_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Number of transmitted unicast packets on the function. */
+ uint64_t tx_ucast_pkts;
+ /* Number of transmitted multicast packets on the function. */
+ uint64_t tx_mcast_pkts;
+ /* Number of transmitted broadcast packets on the function. */
+ uint64_t tx_bcast_pkts;
+ /*
+ * Number of transmitted packets that were discarded due to
+ * internal NIC resource problems. For transmit, this
+ * can only happen if TMP is configured to allow dropping
+ * in HOL blocking conditions, which is not a normal
+ * configuration.
+ */
+ uint64_t tx_discard_pkts;
+ /*
+ * Number of dropped packets on transmit path on the function.
+ * These are packets that have been marked for drop by
+ * the TE CFA block or are packets that exceeded the
+ * transmit MTU limit for the function.
+ */
+ uint64_t tx_drop_pkts;
+ /* Number of transmitted bytes for unicast traffic on the function. */
+ uint64_t tx_ucast_bytes;
+ /* Number of transmitted bytes for multicast traffic on the function. */
+ uint64_t tx_mcast_bytes;
+ /* Number of transmitted bytes for broadcast traffic on the function. */
+ uint64_t tx_bcast_bytes;
+ /* Number of received unicast packets on the function. */
+ uint64_t rx_ucast_pkts;
+ /* Number of received multicast packets on the function. */
+ uint64_t rx_mcast_pkts;
+ /* Number of received broadcast packets on the function. */
+ uint64_t rx_bcast_pkts;
+ /*
+ * Number of received packets that were discarded on the function
+ * due to resource limitations. This can happen for 3 reasons.
+ * # The BD used for the packet has a bad format.
+ * # There were no BDs available in the ring for the packet.
+ * # There were no BDs available on-chip for the packet.
+ */
+ uint64_t rx_discard_pkts;
+ /*
+ * Number of dropped packets on received path on the function.
+ * These are packets that have been marked for drop by the
+ * RE CFA.
+ */
+ uint64_t rx_drop_pkts;
+ /* Number of received bytes for unicast traffic on the function. */
+ uint64_t rx_ucast_bytes;
+ /* Number of received bytes for multicast traffic on the function. */
+ uint64_t rx_mcast_bytes;
+ /* Number of received bytes for broadcast traffic on the function. */
+ uint64_t rx_bcast_bytes;
+ /* Number of aggregated unicast packets on the function. */
+ uint64_t rx_agg_pkts;
+ /* Number of aggregated unicast bytes on the function. */
+ uint64_t rx_agg_bytes;
+ /* Number of aggregation events on the function. */
+ uint64_t rx_agg_events;
+ /* Number of aborted aggregations on the function. */
+ uint64_t rx_agg_aborts;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/************************
+ * hwrm_func_qstats_ext *
+ ************************/
+
+
+/* hwrm_func_qstats_ext_input (size:256b/32B) */
+struct hwrm_func_qstats_ext_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Function ID of the function that is being queried.
+ * 0xFF... (All Fs) if the query is for the requesting
+ * function.
+ * A privileged PF can query for other function's statistics.
+ */
+ uint16_t fid;
+ /* This flags indicates the type of statistics request. */
+ uint8_t flags;
+ /* This value is not used to avoid backward compatibility issues. */
+ #define HWRM_FUNC_QSTATS_EXT_INPUT_FLAGS_UNUSED UINT32_C(0x0)
+ /*
+ * flags should be set to 1 when request is for only RoCE statistics.
+ * This will be honored only if the caller_fid is a privileged PF.
+ * In all other cases FID and caller_fid should be the same.
+ */
+ #define HWRM_FUNC_QSTATS_EXT_INPUT_FLAGS_ROCE_ONLY UINT32_C(0x1)
+ /*
+ * flags should be set to 2 when request is for the counter mask
+ * representing the width of each of the stats counters, rather
+ * than counters themselves.
+ */
+ #define HWRM_FUNC_QSTATS_EXT_INPUT_FLAGS_COUNTER_MASK UINT32_C(0x2)
+ #define HWRM_FUNC_QSTATS_EXT_INPUT_FLAGS_LAST \
+ HWRM_FUNC_QSTATS_EXT_INPUT_FLAGS_COUNTER_MASK
+ uint8_t unused_0[1];
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the schq_id and traffic_class fields to
+ * be configured.
+ */
+ #define HWRM_FUNC_QSTATS_EXT_INPUT_ENABLES_SCHQ_ID UINT32_C(0x1)
+ /* Specifies the SCHQ for which to gather statistics */
+ uint16_t schq_id;
+ /*
+ * Specifies the traffic class for which to gather statistics. Valid
+ * values are 0 through (max_configurable_queues - 1), where
+ * max_configurable_queues is in the response of HWRM_QUEUE_QPORTCFG
+ */
+ uint16_t traffic_class;
+ uint8_t unused_1[4];
+} __rte_packed;
+
+/* hwrm_func_qstats_ext_output (size:1472b/184B) */
+struct hwrm_func_qstats_ext_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Number of received unicast packets */
+ uint64_t rx_ucast_pkts;
+ /* Number of received multicast packets */
+ uint64_t rx_mcast_pkts;
+ /* Number of received broadcast packets */
+ uint64_t rx_bcast_pkts;
+ /* Number of discarded packets on received path */
+ uint64_t rx_discard_pkts;
+ /* Number of packets on receive path with error */
+ uint64_t rx_error_pkts;
+ /* Number of received bytes for unicast traffic */
+ uint64_t rx_ucast_bytes;
+ /* Number of received bytes for multicast traffic */
+ uint64_t rx_mcast_bytes;
+ /* Number of received bytes for broadcast traffic */
+ uint64_t rx_bcast_bytes;
+ /* Number of transmitted unicast packets */
+ uint64_t tx_ucast_pkts;
+ /* Number of transmitted multicast packets */
+ uint64_t tx_mcast_pkts;
+ /* Number of transmitted broadcast packets */
+ uint64_t tx_bcast_pkts;
+ /* Number of packets on transmit path with error */
+ uint64_t tx_error_pkts;
+ /* Number of discarded packets on transmit path */
+ uint64_t tx_discard_pkts;
+ /* Number of transmitted bytes for unicast traffic */
+ uint64_t tx_ucast_bytes;
+ /* Number of transmitted bytes for multicast traffic */
+ uint64_t tx_mcast_bytes;
+ /* Number of transmitted bytes for broadcast traffic */
+ uint64_t tx_bcast_bytes;
+ /* Number of TPA eligible packets */
+ uint64_t rx_tpa_eligible_pkt;
+ /* Number of TPA eligible bytes */
+ uint64_t rx_tpa_eligible_bytes;
+ /* Number of TPA packets */
+ uint64_t rx_tpa_pkt;
+ /* Number of TPA bytes */
+ uint64_t rx_tpa_bytes;
+ /* Number of TPA errors */
+ uint64_t rx_tpa_errors;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***********************
+ * hwrm_func_clr_stats *
+ ***********************/
+
+
+/* hwrm_func_clr_stats_input (size:192b/24B) */
+struct hwrm_func_clr_stats_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Function ID of the function.
+ * 0xFF... (All Fs) if the query is for the requesting
+ * function.
+ */
+ uint16_t fid;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_func_clr_stats_output (size:128b/16B) */
+struct hwrm_func_clr_stats_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**************************
+ * hwrm_func_vf_resc_free *
+ **************************/
+
+
+/* hwrm_func_vf_resc_free_input (size:192b/24B) */
+struct hwrm_func_vf_resc_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * This value is used to identify a Virtual Function (VF).
+ * The scope of VF ID is local within a PF.
+ */
+ uint16_t vf_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_func_vf_resc_free_output (size:128b/16B) */
+struct hwrm_func_vf_resc_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************
+ * hwrm_func_drv_rgtr *
+ **********************/
+
+
+/* hwrm_func_drv_rgtr_input (size:896b/112B) */
+struct hwrm_func_drv_rgtr_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * When this bit is '1', the function driver is requesting
+ * all requests from its children VF drivers to be
+ * forwarded to itself.
+ * This flag can only be set by the PF driver.
+ * If a VF driver sets this flag, it should be ignored
+ * by the HWRM.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_ALL_MODE \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', the function is requesting none of
+ * the requests from its children VF drivers to be
+ * forwarded to itself.
+ * This flag can only be set by the PF driver.
+ * If a VF driver sets this flag, it should be ignored
+ * by the HWRM.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_NONE_MODE \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', then ver_maj_8b, ver_min_8b, ver_upd_8b
+ * fields shall be ignored and ver_maj, ver_min, ver_upd
+ * and ver_patch shall be used for the driver version information.
+ * When this bit is '0', then ver_maj_8b, ver_min_8b, ver_upd_8b
+ * fields shall be used for the driver version information and
+ * ver_maj, ver_min, ver_upd and ver_patch shall be ignored.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_16BIT_VER_MODE \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', the function is indicating support of
+ * 64bit flow handle. The firmware that only supports 64bit flow
+ * handle should check this bit before allowing processing of
+ * HWRM_CFA_FLOW_XXX commands from the requesting function as firmware
+ * with 64bit flow handle support can only be compatible with drivers
+ * that support 64bit flow handle. The legacy drivers that don't support
+ * 64bit flow handle won't be able to use HWRM_CFA_FLOW_XXX commands when
+ * running with new firmware that only supports 64bit flow handle. The new
+ * firmware support 64bit flow handle returns HWRM_ERR_CODE_CMD_NOT_SUPPORTED
+ * status to the legacy driver when encounters these commands.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FLOW_HANDLE_64BIT_MODE \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', the function is indicating support of
+ * Hot Reset. The driver interface will destroy the resources,
+ * unregister the function and register again up on receiving
+ * the RESET_NOTIFY Async notification from the core firmware.
+ * The core firmware will this use flag and trigger the Hot Reset
+ * process only if all the registered driver instances are capable
+ * of this support.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_HOT_RESET_SUPPORT \
+ UINT32_C(0x10)
+ /*
+ * When this bit is 1, the function is indicating the support of the
+ * error recovery capability. Error recovery support will be used by
+ * firmware only if all the driver instances support error recovery
+ * process. By setting this bit, driver is indicating support for
+ * corresponding async event completion message. These will be
+ * delivered to the driver even if they did not register for it.
+ * If supported, after receiving reset notify async event with fatal
+ * flag set in event data1, then all the drivers have to tear down
+ * their resources without sending any HWRM commands to FW.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_ERROR_RECOVERY_SUPPORT \
+ UINT32_C(0x20)
+ /*
+ * When this bit is 1, the function is indicating the support of the
+ * Master capability. The Firmware will use this capability to select the
+ * Master function. The master function will be used to initiate
+ * designated functionality like error recovery etc… If none of the
+ * registered PF’s or trusted VF’s indicate this support, then
+ * firmware will select the 1st registered PF as Master capable instance.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_MASTER_SUPPORT \
+ UINT32_C(0x40)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the os_type field to be
+ * configured.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_OS_TYPE \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the ver field to be
+ * configured.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VER \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the timestamp field to be
+ * configured.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_TIMESTAMP \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the vf_req_fwd field to be
+ * configured.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VF_REQ_FWD \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the async_event_fwd field to be
+ * configured.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_ASYNC_EVENT_FWD \
+ UINT32_C(0x10)
+ /* This value indicates the type of OS. The values are based on CIM_OperatingSystem.mof file as published by the DMTF. */
+ uint16_t os_type;
+ /* Unknown */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_UNKNOWN UINT32_C(0x0)
+ /* Other OS not listed below. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_OTHER UINT32_C(0x1)
+ /* MSDOS OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_MSDOS UINT32_C(0xe)
+ /* Windows OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WINDOWS UINT32_C(0x12)
+ /* Solaris OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_SOLARIS UINT32_C(0x1d)
+ /* Linux OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_LINUX UINT32_C(0x24)
+ /* FreeBSD OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_FREEBSD UINT32_C(0x2a)
+ /* VMware ESXi OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_ESXI UINT32_C(0x68)
+ /* Microsoft Windows 8 64-bit OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN864 UINT32_C(0x73)
+ /* Microsoft Windows Server 2012 R2 OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN2012R2 UINT32_C(0x74)
+ /* UEFI driver. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_UEFI UINT32_C(0x8000)
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_LAST \
+ HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_UEFI
+ /* This is the 8bit major version of the driver. */
+ uint8_t ver_maj_8b;
+ /* This is the 8bit minor version of the driver. */
+ uint8_t ver_min_8b;
+ /* This is the 8bit update version of the driver. */
+ uint8_t ver_upd_8b;
+ uint8_t unused_0[3];
+ /*
+ * This is a 32-bit timestamp provided by the driver for
+ * keep alive.
+ * The timestamp is in multiples of 1ms.
+ */
+ uint32_t timestamp;
+ uint8_t unused_1[4];
+ /*
+ * This is a 256-bit bit mask provided by the PF driver for
+ * letting the HWRM know what commands issued by the VF driver
+ * to the HWRM should be forwarded to the PF driver.
+ * Nth bit refers to the Nth req_type.
+ *
+ * Setting Nth bit to 1 indicates that requests from the
+ * VF driver with req_type equal to N shall be forwarded to
+ * the parent PF driver.
+ *
+ * This field is not valid for the VF driver.
+ */
+ uint32_t vf_req_fwd[8];
+ /*
+ * This is a 256-bit bit mask provided by the function driver
+ * (PF or VF driver) to indicate the list of asynchronous event
+ * completions to be forwarded.
+ *
+ * Nth bit refers to the Nth event_id.
+ *
+ * Setting Nth bit to 1 by the function driver shall result in
+ * the HWRM forwarding asynchronous event completion with
+ * event_id equal to N.
+ *
+ * If all bits are set to 0 (value of 0), then the HWRM shall
+ * not forward any asynchronous event completion to this
+ * function driver.
+ */
+ uint32_t async_event_fwd[8];
+ /* This is the 16bit major version of the driver. */
+ uint16_t ver_maj;
+ /* This is the 16bit minor version of the driver. */
+ uint16_t ver_min;
+ /* This is the 16bit update version of the driver. */
+ uint16_t ver_upd;
+ /* This is the 16bit patch version of the driver. */
+ uint16_t ver_patch;
+} __rte_packed;
+
+/* hwrm_func_drv_rgtr_output (size:128b/16B) */
+struct hwrm_func_drv_rgtr_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t flags;
+ /*
+ * When this bit is '1', it indicates that the
+ * HWRM_FUNC_DRV_IF_CHANGE call is supported.
+ */
+ #define HWRM_FUNC_DRV_RGTR_OUTPUT_FLAGS_IF_CHANGE_SUPPORTED \
+ UINT32_C(0x1)
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/************************
+ * hwrm_func_drv_unrgtr *
+ ************************/
+
+
+/* hwrm_func_drv_unrgtr_input (size:192b/24B) */
+struct hwrm_func_drv_unrgtr_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * When this bit is '1', the function driver is notifying
+ * the HWRM to prepare for the shutdown.
+ */
+ #define HWRM_FUNC_DRV_UNRGTR_INPUT_FLAGS_PREPARE_FOR_SHUTDOWN \
+ UINT32_C(0x1)
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_func_drv_unrgtr_output (size:128b/16B) */
+struct hwrm_func_drv_unrgtr_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************
+ * hwrm_func_buf_rgtr *
+ **********************/
+
+
+/* hwrm_func_buf_rgtr_input (size:1024b/128B) */
+struct hwrm_func_buf_rgtr_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the vf_id field to be
+ * configured.
+ */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_VF_ID UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the err_buf_addr field to be
+ * configured.
+ */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_ERR_BUF_ADDR UINT32_C(0x2)
+ /*
+ * This value is used to identify a Virtual Function (VF).
+ * The scope of VF ID is local within a PF.
+ */
+ uint16_t vf_id;
+ /*
+ * This field represents the number of pages used for request
+ * buffer(s).
+ */
+ uint16_t req_buf_num_pages;
+ /*
+ * This field represents the page size used for request
+ * buffer(s).
+ */
+ uint16_t req_buf_page_size;
+ /* 16 bytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_16B UINT32_C(0x4)
+ /* 4 Kbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_4K UINT32_C(0xc)
+ /* 8 Kbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_8K UINT32_C(0xd)
+ /* 64 Kbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_64K UINT32_C(0x10)
+ /* 2 Mbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_2M UINT32_C(0x15)
+ /* 4 Mbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_4M UINT32_C(0x16)
+ /* 1 Gbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_1G UINT32_C(0x1e)
+ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_LAST \
+ HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_1G
+ /* The length of the request buffer per VF in bytes. */
+ uint16_t req_buf_len;
+ /* The length of the response buffer in bytes. */
+ uint16_t resp_buf_len;
+ uint8_t unused_0[2];
+ /* This field represents the page address of page #0. */
+ uint64_t req_buf_page_addr0;
+ /* This field represents the page address of page #1. */
+ uint64_t req_buf_page_addr1;
+ /* This field represents the page address of page #2. */
+ uint64_t req_buf_page_addr2;
+ /* This field represents the page address of page #3. */
+ uint64_t req_buf_page_addr3;
+ /* This field represents the page address of page #4. */
+ uint64_t req_buf_page_addr4;
+ /* This field represents the page address of page #5. */
+ uint64_t req_buf_page_addr5;
+ /* This field represents the page address of page #6. */
+ uint64_t req_buf_page_addr6;
+ /* This field represents the page address of page #7. */
+ uint64_t req_buf_page_addr7;
+ /* This field represents the page address of page #8. */
+ uint64_t req_buf_page_addr8;
+ /* This field represents the page address of page #9. */
+ uint64_t req_buf_page_addr9;
+ /*
+ * This field is used to receive the error reporting from
+ * the chipset. Only applicable for PFs.
+ */
+ uint64_t error_buf_addr;
+ /*
+ * This field is used to receive the response forwarded by the
+ * HWRM.
+ */
+ uint64_t resp_buf_addr;
+} __rte_packed;
+
+/* hwrm_func_buf_rgtr_output (size:128b/16B) */
+struct hwrm_func_buf_rgtr_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/************************
+ * hwrm_func_buf_unrgtr *
+ ************************/
+
+
+/* hwrm_func_buf_unrgtr_input (size:192b/24B) */
+struct hwrm_func_buf_unrgtr_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the vf_id field to be
+ * configured.
+ */
+ #define HWRM_FUNC_BUF_UNRGTR_INPUT_ENABLES_VF_ID UINT32_C(0x1)
+ /*
+ * This value is used to identify a Virtual Function (VF).
+ * The scope of VF ID is local within a PF.
+ */
+ uint16_t vf_id;
+ uint8_t unused_0[2];
+} __rte_packed;
+
+/* hwrm_func_buf_unrgtr_output (size:128b/16B) */
+struct hwrm_func_buf_unrgtr_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************
+ * hwrm_func_drv_qver *
+ **********************/
+
+
+/* hwrm_func_drv_qver_input (size:192b/24B) */
+struct hwrm_func_drv_qver_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Reserved for future use. */
+ uint32_t reserved;
+ /*
+ * Function ID of the function that is being queried.
+ * 0xFF... (All Fs) if the query is for the requesting
+ * function.
+ */
+ uint16_t fid;
+ uint8_t unused_0[2];
+} __rte_packed;
+
+/* hwrm_func_drv_qver_output (size:256b/32B) */
+struct hwrm_func_drv_qver_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* This value indicates the type of OS. The values are based on CIM_OperatingSystem.mof file as published by the DMTF. */
+ uint16_t os_type;
+ /* Unknown */
+ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_UNKNOWN UINT32_C(0x0)
+ /* Other OS not listed below. */
+ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_OTHER UINT32_C(0x1)
+ /* MSDOS OS. */
+ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_MSDOS UINT32_C(0xe)
+ /* Windows OS. */
+ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_WINDOWS UINT32_C(0x12)
+ /* Solaris OS. */
+ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_SOLARIS UINT32_C(0x1d)
+ /* Linux OS. */
+ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_LINUX UINT32_C(0x24)
+ /* FreeBSD OS. */
+ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_FREEBSD UINT32_C(0x2a)
+ /* VMware ESXi OS. */
+ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_ESXI UINT32_C(0x68)
+ /* Microsoft Windows 8 64-bit OS. */
+ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_WIN864 UINT32_C(0x73)
+ /* Microsoft Windows Server 2012 R2 OS. */
+ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_WIN2012R2 UINT32_C(0x74)
+ /* UEFI driver. */
+ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_UEFI UINT32_C(0x8000)
+ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_LAST \
+ HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_UEFI
+ /* This is the 8bit major version of the driver. */
+ uint8_t ver_maj_8b;
+ /* This is the 8bit minor version of the driver. */
+ uint8_t ver_min_8b;
+ /* This is the 8bit update version of the driver. */
+ uint8_t ver_upd_8b;
+ uint8_t unused_0[3];
+ /* This is the 16bit major version of the driver. */
+ uint16_t ver_maj;
+ /* This is the 16bit minor version of the driver. */
+ uint16_t ver_min;
+ /* This is the 16bit update version of the driver. */
+ uint16_t ver_upd;
+ /* This is the 16bit patch version of the driver. */
+ uint16_t ver_patch;
+ uint8_t unused_1[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/****************************
+ * hwrm_func_resource_qcaps *
+ ****************************/
+
+
+/* hwrm_func_resource_qcaps_input (size:192b/24B) */
+struct hwrm_func_resource_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Function ID of the function that is being queried.
+ * 0xFF... (All Fs) if the query is for the requesting
+ * function.
+ */
+ uint16_t fid;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_func_resource_qcaps_output (size:448b/56B) */
+struct hwrm_func_resource_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Maximum guaranteed number of VFs supported by PF. Not applicable for VFs. */
+ uint16_t max_vfs;
+ /* Maximum guaranteed number of MSI-X vectors supported by function */
+ uint16_t max_msix;
+ /* Hint of strategy to be used by PF driver to reserve resources for its VF */
+ uint16_t vf_reservation_strategy;
+ /* The PF driver should evenly divide its remaining resources among all VFs. */
+ #define HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESERVATION_STRATEGY_MAXIMAL \
+ UINT32_C(0x0)
+ /* The PF driver should only reserve minimal resources for each VF. */
+ #define HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESERVATION_STRATEGY_MINIMAL \
+ UINT32_C(0x1)
+ /*
+ * The PF driver should not reserve any resources for each VF until the
+ * the VF interface is brought up.
+ */
+ #define HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESERVATION_STRATEGY_MINIMAL_STATIC \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESERVATION_STRATEGY_LAST \
+ HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESERVATION_STRATEGY_MINIMAL_STATIC
+ /* Minimum guaranteed number of RSS/COS contexts */
+ uint16_t min_rsscos_ctx;
+ /* Maximum non-guaranteed number of RSS/COS contexts */
+ uint16_t max_rsscos_ctx;
+ /* Minimum guaranteed number of completion rings */
+ uint16_t min_cmpl_rings;
+ /* Maximum non-guaranteed number of completion rings */
+ uint16_t max_cmpl_rings;
+ /* Minimum guaranteed number of transmit rings */
+ uint16_t min_tx_rings;
+ /* Maximum non-guaranteed number of transmit rings */
+ uint16_t max_tx_rings;
+ /* Minimum guaranteed number of receive rings */
+ uint16_t min_rx_rings;
+ /* Maximum non-guaranteed number of receive rings */
+ uint16_t max_rx_rings;
+ /* Minimum guaranteed number of L2 contexts */
+ uint16_t min_l2_ctxs;
+ /* Maximum non-guaranteed number of L2 contexts */
+ uint16_t max_l2_ctxs;
+ /* Minimum guaranteed number of VNICs */
+ uint16_t min_vnics;
+ /* Maximum non-guaranteed number of VNICs */
+ uint16_t max_vnics;
+ /* Minimum guaranteed number of statistic contexts */
+ uint16_t min_stat_ctx;
+ /* Maximum non-guaranteed number of statistic contexts */
+ uint16_t max_stat_ctx;
+ /* Minimum guaranteed number of ring groups */
+ uint16_t min_hw_ring_grps;
+ /* Maximum non-guaranteed number of ring groups */
+ uint16_t max_hw_ring_grps;
+ /*
+ * Maximum number of inputs into the transmit scheduler for this function.
+ * The number of TX rings assigned to the function cannot exceed this value.
+ */
+ uint16_t max_tx_scheduler_inputs;
+ uint16_t flags;
+ /*
+ * When this bit is '1', it indicates that VF_RESOURCE_CFG supports
+ * feature to reserve all minimum resources when minimum >= 1, otherwise
+ * returns an error.
+ */
+ #define HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_FLAGS_MIN_GUARANTEED \
+ UINT32_C(0x1)
+ uint8_t unused_0[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*********************************
+ * hwrm_func_backing_store_qcaps *
+ *********************************/
+
+
+/* hwrm_func_backing_store_qcaps_input (size:128b/16B) */
+struct hwrm_func_backing_store_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+} __rte_packed;
+
+/* hwrm_func_backing_store_qcaps_output (size:640b/80B) */
+struct hwrm_func_backing_store_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Maximum number of QP context entries supported for this function. */
+ uint32_t qp_max_entries;
+ /*
+ * Minimum number of QP context entries that are needed to be reserved
+ * for QP1 for the PF and its VFs. PF drivers must allocate at least
+ * this many QP context entries, even if RoCE will not be used.
+ */
+ uint16_t qp_min_qp1_entries;
+ /* Maximum number of QP context entries that can be used for L2. */
+ uint16_t qp_max_l2_entries;
+ /* Number of bytes that must be allocated for each context entry. */
+ uint16_t qp_entry_size;
+ /* Maximum number of SRQ context entries that can be used for L2. */
+ uint16_t srq_max_l2_entries;
+ /* Maximum number of SRQ context entries supported for this function. */
+ uint32_t srq_max_entries;
+ /* Number of bytes that must be allocated for each context entry. */
+ uint16_t srq_entry_size;
+ /* Maximum number of CQ context entries that can be used for L2. */
+ uint16_t cq_max_l2_entries;
+ /* Maximum number of CQ context entries supported for this function. */
+ uint32_t cq_max_entries;
+ /* Number of bytes that must be allocated for each context entry. */
+ uint16_t cq_entry_size;
+ /* Maximum number of VNIC context entries supported for this function. */
+ uint16_t vnic_max_vnic_entries;
+ /* Maximum number of Ring table context entries supported for this function. */
+ uint16_t vnic_max_ring_table_entries;
+ /* Number of bytes that must be allocated for each context entry. */
+ uint16_t vnic_entry_size;
+ /* Maximum number of statistic context entries supported for this function. */
+ uint32_t stat_max_entries;
+ /* Number of bytes that must be allocated for each context entry. */
+ uint16_t stat_entry_size;
+ /* Number of bytes that must be allocated for each context entry. */
+ uint16_t tqm_entry_size;
+ /* Minimum number of TQM context entries required per ring. */
+ uint32_t tqm_min_entries_per_ring;
+ /*
+ * Maximum number of TQM context entries supported per ring. This is
+ * actually a recommended TQM queue size based on worst case usage of
+ * the TQM queue.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * TQM slowpath rings should be sized as follows:
+ *
+ * num_entries = num_vnics + num_l2_tx_rings + 2 * num_roce_qps + tqm_min_size
+ *
+ * Where:
+ * num_vnics is the number of VNICs allocated in the VNIC backing store
+ * num_l2_tx_rings is the number of L2 rings in the QP backing store
+ * num_roce_qps is the number of RoCE QPs in the QP backing store
+ * tqm_min_size is tqm_min_entries_per_ring reported by
+ * HWRM_FUNC_BACKING_STORE_QCAPS
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate
+ * the backing store.
+ */
+ uint32_t tqm_max_entries_per_ring;
+ /*
+ * Maximum number of MR plus AV context entries supported for this
+ * function.
+ */
+ uint32_t mrav_max_entries;
+ /* Number of bytes that must be allocated for each context entry. */
+ uint16_t mrav_entry_size;
+ /* Number of bytes that must be allocated for each context entry. */
+ uint16_t tim_entry_size;
+ /* Maximum number of Timer context entries supported for this function. */
+ uint32_t tim_max_entries;
+ /*
+ * When this field is zero, the 32b `mrav_num_entries` field in the
+ * `backing_store_cfg` and `backing_store_qcfg` commands represents
+ * the total number of MR plus AV entries allowed in the MR/AV backing
+ * store PBL.
+ *
+ * When this field is non-zero, the 32b `mrav_num_entries` field in
+ * the `backing_store_cfg` and `backing_store_qcfg` commands is
+ * logically divided into two 16b fields. Bits `[31:16]` represents
+ * the `mr_num_entries` and bits `[15:0]` represents `av_num_entries`.
+ * Both of these values are represented in a unit granularity
+ * specified by this field. For example, if this field is 16 and
+ * `mrav_num_entries` is `0x02000100`, then the number of MR entries
+ * is 8192 and the number of AV entries is 4096.
+ */
+ uint16_t mrav_num_entries_units;
+ /*
+ * The number of entries specified for any TQM ring must be a
+ * multiple of this value to prevent any resource allocation
+ * limitations.
+ */
+ uint8_t tqm_entries_multiple;
+ /*
+ * Initializer to be used by drivers
+ * to initialize context memory to ensure
+ * context subsystem flags an error for an attack
+ * before the first time context load.
+ */
+ uint8_t ctx_kind_initializer;
+ /* Reserved for future. */
+ uint32_t rsvd;
+ /* Reserved for future. */
+ uint16_t rsvd1;
+ /*
+ * Count of TQM fastpath rings to be used for allocating backing store.
+ * Backing store configuration must be specified for each TQM ring from
+ * this count in `backing_store_cfg`.
+ */
+ uint8_t tqm_fp_rings_count;
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************************
+ * hwrm_func_backing_store_cfg *
+ *******************************/
+
+
+/* hwrm_func_backing_store_cfg_input (size:2048b/256B) */
+struct hwrm_func_backing_store_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * When set, the firmware only uses on-chip resources and does not
+ * expect any backing store to be provided by the host driver. This
+ * mode provides minimal L2 functionality (e.g. limited L2 resources,
+ * no RoCE).
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_FLAGS_PREBOOT_MODE \
+ UINT32_C(0x1)
+ /*
+ * When set, the 32b `mrav_num_entries` field is logically divided
+ * into two 16b fields, `mr_num_entries` and `av_num_entries`.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_FLAGS_MRAV_RESERVATION_SPLIT \
+ UINT32_C(0x2)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the qp fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_QP \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the srq fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_SRQ \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the cq fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_CQ \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the vnic fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_VNIC \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the stat fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_STAT \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the tqm_sp fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_SP \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the tqm_ring0 fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING0 \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the tqm_ring1 fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING1 \
+ UINT32_C(0x80)
+ /*
+ * This bit must be '1' for the tqm_ring2 fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING2 \
+ UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the tqm_ring3 fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING3 \
+ UINT32_C(0x200)
+ /*
+ * This bit must be '1' for the tqm_ring4 fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING4 \
+ UINT32_C(0x400)
+ /*
+ * This bit must be '1' for the tqm_ring5 fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING5 \
+ UINT32_C(0x800)
+ /*
+ * This bit must be '1' for the tqm_ring6 fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING6 \
+ UINT32_C(0x1000)
+ /*
+ * This bit must be '1' for the tqm_ring7 fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING7 \
+ UINT32_C(0x2000)
+ /*
+ * This bit must be '1' for the mrav fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_MRAV \
+ UINT32_C(0x4000)
+ /*
+ * This bit must be '1' for the tim fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TIM \
+ UINT32_C(0x8000)
+ /* QPC page size and level. */
+ uint8_t qpc_pg_size_qpc_lvl;
+ /* QPC PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_2
+ /* QPC page size. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_1G
+ /* SRQ page size and level. */
+ uint8_t srq_pg_size_srq_lvl;
+ /* SRQ PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_2
+ /* SRQ page size. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_1G
+ /* CQ page size and level. */
+ uint8_t cq_pg_size_cq_lvl;
+ /* CQ PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_2
+ /* CQ page size. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_1G
+ /* VNIC page size and level. */
+ uint8_t vnic_pg_size_vnic_lvl;
+ /* VNIC PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_2
+ /* VNIC page size. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_1G
+ /* Stat page size and level. */
+ uint8_t stat_pg_size_stat_lvl;
+ /* Stat PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_2
+ /* Stat page size. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_1G
+ /* TQM slow path page size and level. */
+ uint8_t tqm_sp_pg_size_tqm_sp_lvl;
+ /* TQM slow path PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_2
+ /* TQM slow path page size. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_1G
+ /* TQM ring 0 page size and level. */
+ uint8_t tqm_ring0_pg_size_tqm_ring0_lvl;
+ /* TQM ring 0 PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_2
+ /* TQM ring 0 page size. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_1G
+ /* TQM ring 1 page size and level. */
+ uint8_t tqm_ring1_pg_size_tqm_ring1_lvl;
+ /* TQM ring 1 PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_2
+ /* TQM ring 1 page size. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_1G
+ /* TQM ring 2 page size and level. */
+ uint8_t tqm_ring2_pg_size_tqm_ring2_lvl;
+ /* TQM ring 2 PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_2
+ /* TQM ring 2 page size. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_1G
+ /* TQM ring 3 page size and level. */
+ uint8_t tqm_ring3_pg_size_tqm_ring3_lvl;
+ /* TQM ring 3 PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_2
+ /* TQM ring 3 page size. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_1G
+ /* TQM ring 4 page size and level. */
+ uint8_t tqm_ring4_pg_size_tqm_ring4_lvl;
+ /* TQM ring 4 PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_2
+ /* TQM ring 4 page size. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_1G
+ /* TQM ring 5 page size and level. */
+ uint8_t tqm_ring5_pg_size_tqm_ring5_lvl;
+ /* TQM ring 5 PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_2
+ /* TQM ring 5 page size. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_1G
+ /* TQM ring 6 page size and level. */
+ uint8_t tqm_ring6_pg_size_tqm_ring6_lvl;
+ /* TQM ring 6 PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_2
+ /* TQM ring 6 page size. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_1G
+ /* TQM ring 7 page size and level. */
+ uint8_t tqm_ring7_pg_size_tqm_ring7_lvl;
+ /* TQM ring 7 PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_2
+ /* TQM ring 7 page size. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_1G
+ /* MR/AV page size and level. */
+ uint8_t mrav_pg_size_mrav_lvl;
+ /* MR/AV PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_2
+ /* MR/AV page size. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_1G
+ /* Timer page size and level. */
+ uint8_t tim_pg_size_tim_lvl;
+ /* Timer PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_2
+ /* Timer page size. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_1G
+ /* QP page directory. */
+ uint64_t qpc_page_dir;
+ /* SRQ page directory. */
+ uint64_t srq_page_dir;
+ /* CQ page directory. */
+ uint64_t cq_page_dir;
+ /* VNIC page directory. */
+ uint64_t vnic_page_dir;
+ /* Stat page directory. */
+ uint64_t stat_page_dir;
+ /* TQM slowpath page directory. */
+ uint64_t tqm_sp_page_dir;
+ /* TQM ring 0 page directory. */
+ uint64_t tqm_ring0_page_dir;
+ /* TQM ring 1 page directory. */
+ uint64_t tqm_ring1_page_dir;
+ /* TQM ring 2 page directory. */
+ uint64_t tqm_ring2_page_dir;
+ /* TQM ring 3 page directory. */
+ uint64_t tqm_ring3_page_dir;
+ /* TQM ring 4 page directory. */
+ uint64_t tqm_ring4_page_dir;
+ /* TQM ring 5 page directory. */
+ uint64_t tqm_ring5_page_dir;
+ /* TQM ring 6 page directory. */
+ uint64_t tqm_ring6_page_dir;
+ /* TQM ring 7 page directory. */
+ uint64_t tqm_ring7_page_dir;
+ /* MR/AV page directory. */
+ uint64_t mrav_page_dir;
+ /* Timer page directory. */
+ uint64_t tim_page_dir;
+ /* Number of QPs. */
+ uint32_t qp_num_entries;
+ /* Number of SRQs. */
+ uint32_t srq_num_entries;
+ /* Number of CQs. */
+ uint32_t cq_num_entries;
+ /* Number of Stats. */
+ uint32_t stat_num_entries;
+ /*
+ * Number of TQM slowpath entries.
+ *
+ * TQM slowpath rings should be sized as follows:
+ *
+ * num_entries = num_vnics + num_l2_tx_rings + 2 * num_roce_qps + tqm_min_size
+ *
+ * Where:
+ * num_vnics is the number of VNICs allocated in the VNIC backing store
+ * num_l2_tx_rings is the number of L2 rings in the QP backing store
+ * num_roce_qps is the number of RoCE QPs in the QP backing store
+ * tqm_min_size is tqm_min_entries_per_ring reported by
+ * HWRM_FUNC_BACKING_STORE_QCAPS
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate
+ * the backing store.
+ */
+ uint32_t tqm_sp_num_entries;
+ /*
+ * Number of TQM ring 0 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate
+ * the backing store.
+ */
+ uint32_t tqm_ring0_num_entries;
+ /*
+ * Number of TQM ring 1 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate
+ * the backing store.
+ */
+ uint32_t tqm_ring1_num_entries;
+ /*
+ * Number of TQM ring 2 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate
+ * the backing store.
+ */
+ uint32_t tqm_ring2_num_entries;
+ /*
+ * Number of TQM ring 3 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate
+ * the backing store.
+ */
+ uint32_t tqm_ring3_num_entries;
+ /*
+ * Number of TQM ring 4 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate
+ * the backing store.
+ */
+ uint32_t tqm_ring4_num_entries;
+ /*
+ * Number of TQM ring 5 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate
+ * the backing store.
+ */
+ uint32_t tqm_ring5_num_entries;
+ /*
+ * Number of TQM ring 6 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate
+ * the backing store.
+ */
+ uint32_t tqm_ring6_num_entries;
+ /*
+ * Number of TQM ring 7 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to reset the function (e.g. HWRM_FUNC_RESET) and then reallocate
+ * the backing store.
+ */
+ uint32_t tqm_ring7_num_entries;
+ /*
+ * If the MR/AV split reservation flag is not set, then this field
+ * represents the total number of MR plus AV entries. For versions
+ * of firmware that support the split reservation, when it is not
+ * specified half of the entries will be reserved for MRs and the
+ * other half for AVs.
+ *
+ * If the MR/AV split reservation flag is set, then this
+ * field is logically divided into two 16b fields. Bits `[31:16]`
+ * represents the `mr_num_entries` and bits `[15:0]` represents
+ * `av_num_entries`. The granularity of these values is defined by
+ * the `mrav_num_entries_unit` field returned by the
+ * `backing_store_qcaps` command.
+ */
+ uint32_t mrav_num_entries;
+ /* Number of Timer entries. */
+ uint32_t tim_num_entries;
+ /* Number of entries to reserve for QP1 */
+ uint16_t qp_num_qp1_entries;
+ /* Number of entries to reserve for L2 */
+ uint16_t qp_num_l2_entries;
+ /* Number of bytes that have been allocated for each context entry. */
+ uint16_t qp_entry_size;
+ /* Number of entries to reserve for L2 */
+ uint16_t srq_num_l2_entries;
+ /* Number of bytes that have been allocated for each context entry. */
+ uint16_t srq_entry_size;
+ /* Number of entries to reserve for L2 */
+ uint16_t cq_num_l2_entries;
+ /* Number of bytes that have been allocated for each context entry. */
+ uint16_t cq_entry_size;
+ /* Number of entries to reserve for VNIC entries */
+ uint16_t vnic_num_vnic_entries;
+ /* Number of entries to reserve for Ring table entries */
+ uint16_t vnic_num_ring_table_entries;
+ /* Number of bytes that have been allocated for each context entry. */
+ uint16_t vnic_entry_size;
+ /* Number of bytes that have been allocated for each context entry. */
+ uint16_t stat_entry_size;
+ /* Number of bytes that have been allocated for each context entry. */
+ uint16_t tqm_entry_size;
+ /* Number of bytes that have been allocated for each context entry. */
+ uint16_t mrav_entry_size;
+ /* Number of bytes that have been allocated for each context entry. */
+ uint16_t tim_entry_size;
+} __rte_packed;
+
+/* hwrm_func_backing_store_cfg_output (size:128b/16B) */
+struct hwrm_func_backing_store_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/********************************
+ * hwrm_func_backing_store_qcfg *
+ ********************************/
+
+
+/* hwrm_func_backing_store_qcfg_input (size:128b/16B) */
+struct hwrm_func_backing_store_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+} __rte_packed;
+
+/* hwrm_func_backing_store_qcfg_output (size:1920b/240B) */
+struct hwrm_func_backing_store_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t flags;
+ /*
+ * When set, the firmware only uses on-chip resources and does not
+ * expect any backing store to be provided by the host driver. This
+ * mode provides minimal L2 functionality (e.g. limited L2 resources,
+ * no RoCE).
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_FLAGS_PREBOOT_MODE \
+ UINT32_C(0x1)
+ /*
+ * When set, the 32b `mrav_num_entries` field is logically divided
+ * into two 16b fields, `mr_num_entries` and `av_num_entries`.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_FLAGS_MRAV_RESERVATION_SPLIT \
+ UINT32_C(0x2)
+ uint8_t unused_0[4];
+ /*
+ * This bit must be '1' for the qp fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_QP \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the srq fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_SRQ \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the cq fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_CQ \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the vnic fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_VNIC \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the stat fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_STAT \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the tqm_sp fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_SP \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the tqm_ring0 fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING0 \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the tqm_ring1 fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING1 \
+ UINT32_C(0x80)
+ /*
+ * This bit must be '1' for the tqm_ring2 fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING2 \
+ UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the tqm_ring3 fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING3 \
+ UINT32_C(0x200)
+ /*
+ * This bit must be '1' for the tqm_ring4 fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING4 \
+ UINT32_C(0x400)
+ /*
+ * This bit must be '1' for the tqm_ring5 fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING5 \
+ UINT32_C(0x800)
+ /*
+ * This bit must be '1' for the tqm_ring6 fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING6 \
+ UINT32_C(0x1000)
+ /*
+ * This bit must be '1' for the tqm_ring7 fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING7 \
+ UINT32_C(0x2000)
+ /*
+ * This bit must be '1' for the mrav fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_MRAV \
+ UINT32_C(0x4000)
+ /*
+ * This bit must be '1' for the tim fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TIM \
+ UINT32_C(0x8000)
+ /* QPC page size and level. */
+ uint8_t qpc_pg_size_qpc_lvl;
+ /* QPC PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LVL_2
+ /* QPC page size. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_1G
+ /* SRQ page size and level. */
+ uint8_t srq_pg_size_srq_lvl;
+ /* SRQ PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LVL_2
+ /* SRQ page size. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_1G
+ /* CQ page size and level. */
+ uint8_t cq_pg_size_cq_lvl;
+ /* CQ PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LVL_2
+ /* CQ page size. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_1G
+ /* VNIC page size and level. */
+ uint8_t vnic_pg_size_vnic_lvl;
+ /* VNIC PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LVL_2
+ /* VNIC page size. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_1G
+ /* Stat page size and level. */
+ uint8_t stat_pg_size_stat_lvl;
+ /* Stat PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LVL_2
+ /* Stat page size. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_1G
+ /* TQM slow path page size and level. */
+ uint8_t tqm_sp_pg_size_tqm_sp_lvl;
+ /* TQM slow path PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LVL_2
+ /* TQM slow path page size. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_1G
+ /* TQM ring 0 page size and level. */
+ uint8_t tqm_ring0_pg_size_tqm_ring0_lvl;
+ /* TQM ring 0 PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LVL_2
+ /* TQM ring 0 page size. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_1G
+ /* TQM ring 1 page size and level. */
+ uint8_t tqm_ring1_pg_size_tqm_ring1_lvl;
+ /* TQM ring 1 PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LVL_2
+ /* TQM ring 1 page size. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_1G
+ /* TQM ring 2 page size and level. */
+ uint8_t tqm_ring2_pg_size_tqm_ring2_lvl;
+ /* TQM ring 2 PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LVL_2
+ /* TQM ring 2 page size. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_1G
+ /* TQM ring 3 page size and level. */
+ uint8_t tqm_ring3_pg_size_tqm_ring3_lvl;
+ /* TQM ring 3 PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LVL_2
+ /* TQM ring 3 page size. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_1G
+ /* TQM ring 4 page size and level. */
+ uint8_t tqm_ring4_pg_size_tqm_ring4_lvl;
+ /* TQM ring 4 PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LVL_2
+ /* TQM ring 4 page size. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_1G
+ /* TQM ring 5 page size and level. */
+ uint8_t tqm_ring5_pg_size_tqm_ring5_lvl;
+ /* TQM ring 5 PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LVL_2
+ /* TQM ring 5 page size. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_1G
+ /* TQM ring 6 page size and level. */
+ uint8_t tqm_ring6_pg_size_tqm_ring6_lvl;
+ /* TQM ring 6 PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LVL_2
+ /* TQM ring 6 page size. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_1G
+ /* TQM ring 7 page size and level. */
+ uint8_t tqm_ring7_pg_size_tqm_ring7_lvl;
+ /* TQM ring 7 PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LVL_2
+ /* TQM ring 7 page size. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_1G
+ /* MR/AV page size and level. */
+ uint8_t mrav_pg_size_mrav_lvl;
+ /* MR/AV PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LVL_2
+ /* MR/AV page size. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_1G
+ /* Timer page size and level. */
+ uint8_t tim_pg_size_tim_lvl;
+ /* Timer PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LVL_2
+ /* Timer page size. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_1G
+ /* QP page directory. */
+ uint64_t qpc_page_dir;
+ /* SRQ page directory. */
+ uint64_t srq_page_dir;
+ /* CQ page directory. */
+ uint64_t cq_page_dir;
+ /* VNIC page directory. */
+ uint64_t vnic_page_dir;
+ /* Stat page directory. */
+ uint64_t stat_page_dir;
+ /* TQM slowpath page directory. */
+ uint64_t tqm_sp_page_dir;
+ /* TQM ring 0 page directory. */
+ uint64_t tqm_ring0_page_dir;
+ /* TQM ring 1 page directory. */
+ uint64_t tqm_ring1_page_dir;
+ /* TQM ring 2 page directory. */
+ uint64_t tqm_ring2_page_dir;
+ /* TQM ring 3 page directory. */
+ uint64_t tqm_ring3_page_dir;
+ /* TQM ring 4 page directory. */
+ uint64_t tqm_ring4_page_dir;
+ /* TQM ring 5 page directory. */
+ uint64_t tqm_ring5_page_dir;
+ /* TQM ring 6 page directory. */
+ uint64_t tqm_ring6_page_dir;
+ /* TQM ring 7 page directory. */
+ uint64_t tqm_ring7_page_dir;
+ /* MR/AV page directory. */
+ uint64_t mrav_page_dir;
+ /* Timer page directory. */
+ uint64_t tim_page_dir;
+ /* Number of entries to reserve for QP1 */
+ uint16_t qp_num_qp1_entries;
+ /* Number of entries to reserve for L2 */
+ uint16_t qp_num_l2_entries;
+ /* Number of QPs. */
+ uint32_t qp_num_entries;
+ /* Number of SRQs. */
+ uint32_t srq_num_entries;
+ /* Number of entries to reserve for L2 */
+ uint16_t srq_num_l2_entries;
+ /* Number of entries to reserve for L2 */
+ uint16_t cq_num_l2_entries;
+ /* Number of CQs. */
+ uint32_t cq_num_entries;
+ /* Number of entries to reserve for VNIC entries */
+ uint16_t vnic_num_vnic_entries;
+ /* Number of entries to reserve for Ring table entries */
+ uint16_t vnic_num_ring_table_entries;
+ /* Number of Stats. */
+ uint32_t stat_num_entries;
+ /* Number of TQM slowpath entries. */
+ uint32_t tqm_sp_num_entries;
+ /* Number of TQM ring 0 entries. */
+ uint32_t tqm_ring0_num_entries;
+ /* Number of TQM ring 1 entries. */
+ uint32_t tqm_ring1_num_entries;
+ /* Number of TQM ring 2 entries. */
+ uint32_t tqm_ring2_num_entries;
+ /* Number of TQM ring 3 entries. */
+ uint32_t tqm_ring3_num_entries;
+ /* Number of TQM ring 4 entries. */
+ uint32_t tqm_ring4_num_entries;
+ /* Number of TQM ring 5 entries. */
+ uint32_t tqm_ring5_num_entries;
+ /* Number of TQM ring 6 entries. */
+ uint32_t tqm_ring6_num_entries;
+ /* Number of TQM ring 7 entries. */
+ uint32_t tqm_ring7_num_entries;
+ /*
+ * If the MR/AV split reservation flag is not set, then this field
+ * represents the total number of MR plus AV entries. For versions
+ * of firmware that support the split reservation, when it is not
+ * specified half of the entries will be reserved for MRs and the
+ * other half for AVs.
+ *
+ * If the MR/AV split reservation flag is set, then this
+ * field is logically divided into two 16b fields. Bits `[31:16]`
+ * represents the `mr_num_entries` and bits `[15:0]` represents
+ * `av_num_entries`. The granularity of these values is defined by
+ * the `mrav_num_entries_unit` field returned by the
+ * `backing_store_qcaps` command.
+ */
+ uint32_t mrav_num_entries;
+ /* Number of Timer entries. */
+ uint32_t tim_num_entries;
+ uint8_t unused_1[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as 1
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field
+ * is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/****************************
+ * hwrm_error_recovery_qcfg *
+ ****************************/
+
+
+/* hwrm_error_recovery_qcfg_input (size:192b/24B) */
+struct hwrm_error_recovery_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint8_t unused_0[8];
+} __rte_packed;
+
+/* hwrm_error_recovery_qcfg_output (size:1664b/208B) */
+struct hwrm_error_recovery_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t flags;
+ /*
+ * When this flag is set to 1, error recovery will be initiated
+ * through master function driver.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FLAGS_HOST UINT32_C(0x1)
+ /*
+ * When this flag is set to 1, error recovery will be performed
+ * through Co processor.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FLAGS_CO_CPU UINT32_C(0x2)
+ /*
+ * Driver Polling frequency. This value is in units of 100msec.
+ * Typical value would be 10 to indicate 1sec.
+ * Drivers can poll FW health status, Heartbeat, reset_counter with
+ * this frequency.
+ */
+ uint32_t driver_polling_freq;
+ /*
+ * This value is in units of 100msec.
+ * Typical value would be 30 to indicate 3sec.
+ * Master function wait period from detecting a fatal error to
+ * initiating reset. In this time period Master PF expects every
+ * active driver will detect fatal error.
+ */
+ uint32_t master_func_wait_period;
+ /*
+ * This value is in units of 100msec.
+ * Typical value would be 50 to indicate 5sec.
+ * Normal function wait period from fatal error detection to
+ * polling FW health status. In this time period, drivers should not
+ * do any PCIe MMIO transaction and should not send any HWRM commands.
+ */
+ uint32_t normal_func_wait_period;
+ /*
+ * This value is in units of 100msec.
+ * Typical value would be 20 to indicate 2sec.
+ * This field indicates that, master function wait period after chip
+ * reset. After this time, master function should reinitialize with
+ * FW.
+ */
+ uint32_t master_func_wait_period_after_reset;
+ /*
+ * This value is in units of 100msec.
+ * Typical value would be 60 to indicate 6sec.
+ * This field is applicable to both master and normal functions.
+ * Even after chip reset, if FW status not changed to ready,
+ * then all the functions can poll for this much time and bailout.
+ */
+ uint32_t max_bailout_time_after_reset;
+ /*
+ * FW health status register.
+ * Lower 2 bits indicates address space location and upper 30 bits
+ * indicates upper 30bits of the register address.
+ * A value of 0xFFFF-FFFF indicates this register does not exist.
+ */
+ uint32_t fw_health_status_reg;
+ /* Lower 2 bits indicates address space location. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_MASK \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_SFT \
+ 0
+ /*
+ * If value is 0, this register is located in PCIe config space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_PCIE_CFG \
+ UINT32_C(0x0)
+ /*
+ * If value is 1, this register is located in GRC address space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_GRC \
+ UINT32_C(0x1)
+ /*
+ * If value is 2, this register is located in first BAR address
+ * space. Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_BAR0 \
+ UINT32_C(0x2)
+ /*
+ * If value is 3, this register is located in second BAR address
+ * space. Drivers have to map appropriate window to access this
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_BAR1 \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_LAST \
+ HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_BAR1
+ /* Upper 30bits of the register address. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_MASK \
+ UINT32_C(0xfffffffc)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SFT \
+ 2
+ /*
+ * FW HeartBeat register.
+ * Lower 2 bits indicates address space location and upper 30 bits
+ * indicates actual address.
+ * A value of 0xFFFF-FFFF indicates this register does not exist.
+ */
+ uint32_t fw_heartbeat_reg;
+ /* Lower 2 bits indicates address space location. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_MASK \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_SFT \
+ 0
+ /*
+ * If value is 0, this register is located in PCIe config space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_PCIE_CFG \
+ UINT32_C(0x0)
+ /*
+ * If value is 1, this register is located in GRC address space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_GRC \
+ UINT32_C(0x1)
+ /*
+ * If value is 2, this register is located in first BAR address
+ * space. Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_BAR0 \
+ UINT32_C(0x2)
+ /*
+ * If value is 3, this register is located in second BAR address
+ * space. Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_BAR1 \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_LAST \
+ HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_BAR1
+ /* Upper 30bits of the register address. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_MASK \
+ UINT32_C(0xfffffffc)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SFT \
+ 2
+ /*
+ * FW reset counter.
+ * Lower 2 bits indicates address space location and upper 30 bits
+ * indicates actual address.
+ * A value of 0xFFFF-FFFF indicates this register does not exist.
+ */
+ uint32_t fw_reset_cnt_reg;
+ /* Lower 2 bits indicates address space location. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_MASK \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_SFT \
+ 0
+ /*
+ * If value is 0, this register is located in PCIe config space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_PCIE_CFG \
+ UINT32_C(0x0)
+ /*
+ * If value is 1, this register is located in GRC address space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_GRC \
+ UINT32_C(0x1)
+ /*
+ * If value is 2, this register is located in first BAR address
+ * space. Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_BAR0 \
+ UINT32_C(0x2)
+ /*
+ * If value is 3, this register is located in second BAR address
+ * space. Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_BAR1 \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_LAST \
+ HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_BAR1
+ /* Upper 30bits of the register address. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_MASK \
+ UINT32_C(0xfffffffc)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SFT \
+ 2
+ /*
+ * Reset Inprogress Register address for PFs.
+ * Lower 2 bits indicates address space location and upper 30 bits
+ * indicates actual address.
+ * A value of 0xFFFF-FFFF indicates this register does not exist.
+ */
+ uint32_t reset_inprogress_reg;
+ /* Lower 2 bits indicates address space location. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_MASK \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_SFT \
+ 0
+ /*
+ * If value is 0, this register is located in PCIe config space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_PCIE_CFG \
+ UINT32_C(0x0)
+ /*
+ * If value is 1, this register is located in GRC address space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_GRC \
+ UINT32_C(0x1)
+ /*
+ * If value is 2, this register is located in first BAR address
+ * space. Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_BAR0 \
+ UINT32_C(0x2)
+ /*
+ * If value is 3, this register is located in second BAR address
+ * space. Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_BAR1 \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_LAST \
+ HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_BAR1
+ /* Upper 30bits of the register address. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_MASK \
+ UINT32_C(0xfffffffc)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SFT \
+ 2
+ /* This field indicates the mask value for reset_inprogress_reg. */
+ uint32_t reset_inprogress_reg_mask;
+ uint8_t unused_0[3];
+ /*
+ * Array of registers and value count to reset the Chip
+ * Each array count has reset_reg, reset_reg_val, delay_after_reset
+ * in TLV format. Depending upon Chip type, number of reset registers
+ * will vary. Drivers have to write reset_reg_val in the reset_reg
+ * location in the same sequence in order to recover from a fatal
+ * error.
+ */
+ uint8_t reg_array_cnt;
+ /*
+ * Reset register.
+ * Lower 2 bits indicates address space location and upper 30 bits
+ * indicates actual address.
+ * A value of 0xFFFF-FFFF indicates this register does not exist.
+ */
+ uint32_t reset_reg[16];
+ /* Lower 2 bits indicates address space location. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_MASK \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_SFT 0
+ /*
+ * If value is 0, this register is located in PCIe config space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_PCIE_CFG \
+ UINT32_C(0x0)
+ /*
+ * If value is 1, this register is located in GRC address space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_GRC \
+ UINT32_C(0x1)
+ /*
+ * If value is 2, this register is located in first BAR address
+ * space. Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_BAR0 \
+ UINT32_C(0x2)
+ /*
+ * If value is 3, this register is located in second BAR address
+ * space. Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_BAR1 \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_LAST \
+ HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_BAR1
+ /* Upper 30bits of the register address. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_MASK \
+ UINT32_C(0xfffffffc)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SFT 2
+ /* Value to be written in reset_reg to reset the controller. */
+ uint32_t reset_reg_val[16];
+ /*
+ * This value is in units of 1msec.
+ * Typical value would be 10 to indicate 10msec.
+ * Some of the operations like Core reset require delay before
+ * accessing PCIE MMIO register space.
+ * If this value is non-zero, drivers have to wait for
+ * this much time after writing reset_reg_val in reset_reg.
+ */
+ uint8_t delay_after_reset[16];
+ /*
+ * Error recovery counter.
+ * Lower 2 bits indicates address space location and upper 30 bits
+ * indicates actual address.
+ * A value of 0xFFFF-FFFF indicates this register does not exist.
+ */
+ uint32_t err_recovery_cnt_reg;
+ /* Lower 2 bits indicates address space location. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_MASK \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_SFT \
+ 0
+ /*
+ * If value is 0, this register is located in PCIe config space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_PCIE_CFG \
+ UINT32_C(0x0)
+ /*
+ * If value is 1, this register is located in GRC address space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_GRC \
+ UINT32_C(0x1)
+ /*
+ * If value is 2, this register is located in first BAR address
+ * space. Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_BAR0 \
+ UINT32_C(0x2)
+ /*
+ * If value is 3, this register is located in second BAR address
+ * space. Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_BAR1 \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_LAST \
+ HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SPACE_BAR1
+ /* Upper 30bits of the register address. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_MASK \
+ UINT32_C(0xfffffffc)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_ERR_RECOVERY_CNT_REG_ADDR_SFT \
+ 2
+ uint8_t unused_1[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field
+ * is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***********************
+ * hwrm_func_vlan_qcfg *
+ ***********************/
+
+
+/* hwrm_func_vlan_qcfg_input (size:192b/24B) */
+struct hwrm_func_vlan_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Function ID of the function that is being
+ * configured.
+ * If set to 0xFF... (All Fs), then the configuration is
+ * for the requesting function.
+ */
+ uint16_t fid;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_func_vlan_qcfg_output (size:320b/40B) */
+struct hwrm_func_vlan_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint64_t unused_0;
+ /* S-TAG VLAN identifier configured for the function. */
+ uint16_t stag_vid;
+ /* S-TAG PCP value configured for the function. */
+ uint8_t stag_pcp;
+ uint8_t unused_1;
+ /*
+ * S-TAG TPID value configured for the function. This field is specified in
+ * network byte order.
+ */
+ uint16_t stag_tpid;
+ /* C-TAG VLAN identifier configured for the function. */
+ uint16_t ctag_vid;
+ /* C-TAG PCP value configured for the function. */
+ uint8_t ctag_pcp;
+ uint8_t unused_2;
+ /*
+ * C-TAG TPID value configured for the function. This field is specified in
+ * network byte order.
+ */
+ uint16_t ctag_tpid;
+ /* Future use. */
+ uint32_t rsvd2;
+ /* Future use. */
+ uint32_t rsvd3;
+ uint8_t unused_3[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************
+ * hwrm_func_vlan_cfg *
+ **********************/
+
+
+/* hwrm_func_vlan_cfg_input (size:384b/48B) */
+struct hwrm_func_vlan_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Function ID of the function that is being
+ * configured.
+ * If set to 0xFF... (All Fs), then the configuration is
+ * for the requesting function.
+ */
+ uint16_t fid;
+ uint8_t unused_0[2];
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the stag_vid field to be
+ * configured.
+ */
+ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_VID UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the ctag_vid field to be
+ * configured.
+ */
+ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_VID UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the stag_pcp field to be
+ * configured.
+ */
+ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_PCP UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the ctag_pcp field to be
+ * configured.
+ */
+ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_PCP UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the stag_tpid field to be
+ * configured.
+ */
+ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_TPID UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the ctag_tpid field to be
+ * configured.
+ */
+ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_TPID UINT32_C(0x20)
+ /* S-TAG VLAN identifier configured for the function. */
+ uint16_t stag_vid;
+ /* S-TAG PCP value configured for the function. */
+ uint8_t stag_pcp;
+ uint8_t unused_1;
+ /*
+ * S-TAG TPID value configured for the function. This field is specified in
+ * network byte order.
+ */
+ uint16_t stag_tpid;
+ /* C-TAG VLAN identifier configured for the function. */
+ uint16_t ctag_vid;
+ /* C-TAG PCP value configured for the function. */
+ uint8_t ctag_pcp;
+ uint8_t unused_2;
+ /*
+ * C-TAG TPID value configured for the function. This field is specified in
+ * network byte order.
+ */
+ uint16_t ctag_tpid;
+ /* Future use. */
+ uint32_t rsvd1;
+ /* Future use. */
+ uint32_t rsvd2;
+ uint8_t unused_3[4];
+} __rte_packed;
+
+/* hwrm_func_vlan_cfg_output (size:128b/16B) */
+struct hwrm_func_vlan_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************************
+ * hwrm_func_vf_vnic_ids_query *
+ *******************************/
+
+
+/* hwrm_func_vf_vnic_ids_query_input (size:256b/32B) */
+struct hwrm_func_vf_vnic_ids_query_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * This value is used to identify a Virtual Function (VF).
+ * The scope of VF ID is local within a PF.
+ */
+ uint16_t vf_id;
+ uint8_t unused_0[2];
+ /* Max number of vnic ids in vnic id table */
+ uint32_t max_vnic_id_cnt;
+ /* This is the address for VF VNIC ID table */
+ uint64_t vnic_id_tbl_addr;
+} __rte_packed;
+
+/* hwrm_func_vf_vnic_ids_query_output (size:128b/16B) */
+struct hwrm_func_vf_vnic_ids_query_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * Actual number of vnic ids
+ *
+ * Each VNIC ID is written as a 32-bit number.
+ */
+ uint32_t vnic_id_cnt;
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***********************
+ * hwrm_func_vf_bw_cfg *
+ ***********************/
+
+
+/* hwrm_func_vf_bw_cfg_input (size:960b/120B) */
+struct hwrm_func_vf_bw_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * The number of VF functions that are being configured.
+ * The cmd space allows up to 50 VFs' BW to be configured with one cmd.
+ */
+ uint16_t num_vfs;
+ uint16_t unused[3];
+ /* These 16-bit fields contain the VF fid and the rate scale percentage. */
+ uint16_t vfn[48];
+ /* The physical VF id the adjustment will be made to. */
+ #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_VFID_MASK UINT32_C(0xfff)
+ #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_VFID_SFT 0
+ /*
+ * This field configures the rate scale percentage of the VF as specified
+ * by the physical VF id.
+ */
+ #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_MASK UINT32_C(0xf000)
+ #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_SFT 12
+ /* 0% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_0 \
+ (UINT32_C(0x0) << 12)
+ /* 6.66% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_6_66 \
+ (UINT32_C(0x1) << 12)
+ /* 13.33% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_13_33 \
+ (UINT32_C(0x2) << 12)
+ /* 20% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_20 \
+ (UINT32_C(0x3) << 12)
+ /* 26.66% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_26_66 \
+ (UINT32_C(0x4) << 12)
+ /* 33% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_33_33 \
+ (UINT32_C(0x5) << 12)
+ /* 40% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_40 \
+ (UINT32_C(0x6) << 12)
+ /* 46.66% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_46_66 \
+ (UINT32_C(0x7) << 12)
+ /* 53.33% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_53_33 \
+ (UINT32_C(0x8) << 12)
+ /* 60% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_60 \
+ (UINT32_C(0x9) << 12)
+ /* 66.66% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_66_66 \
+ (UINT32_C(0xa) << 12)
+ /* 53.33% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_73_33 \
+ (UINT32_C(0xb) << 12)
+ /* 80% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_80 \
+ (UINT32_C(0xc) << 12)
+ /* 86.66% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_86_66 \
+ (UINT32_C(0xd) << 12)
+ /* 93.33% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_93_33 \
+ (UINT32_C(0xe) << 12)
+ /* 100% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_100 \
+ (UINT32_C(0xf) << 12)
+ #define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_LAST \
+ HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_100
+} __rte_packed;
+
+/* hwrm_func_vf_bw_cfg_output (size:128b/16B) */
+struct hwrm_func_vf_bw_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/************************
+ * hwrm_func_vf_bw_qcfg *
+ ************************/
+
+
+/* hwrm_func_vf_bw_qcfg_input (size:960b/120B) */
+struct hwrm_func_vf_bw_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * The number of VF functions that are being queried.
+ * The inline response space allows the host to query up to 50 VFs'
+ * rate scale percentage
+ */
+ uint16_t num_vfs;
+ uint16_t unused[3];
+ /* These 16-bit fields contain the VF fid */
+ uint16_t vfn[48];
+ /* The physical VF id of interest */
+ #define HWRM_FUNC_VF_BW_QCFG_INPUT_VFN_VFID_MASK UINT32_C(0xfff)
+ #define HWRM_FUNC_VF_BW_QCFG_INPUT_VFN_VFID_SFT 0
+} __rte_packed;
+
+/* hwrm_func_vf_bw_qcfg_output (size:960b/120B) */
+struct hwrm_func_vf_bw_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * The number of VF functions that are being queried.
+ * The inline response space allows the host to query up to 50 VFs' rate
+ * scale percentage
+ */
+ uint16_t num_vfs;
+ uint16_t unused[3];
+ /* These 16-bit fields contain the VF fid and the rate scale percentage. */
+ uint16_t vfn[48];
+ /* The physical VF id the adjustment will be made to. */
+ #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_VFID_MASK UINT32_C(0xfff)
+ #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_VFID_SFT 0
+ /*
+ * This field configures the rate scale percentage of the VF as specified
+ * by the physical VF id.
+ */
+ #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_MASK UINT32_C(0xf000)
+ #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_SFT 12
+ /* 0% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_0 \
+ (UINT32_C(0x0) << 12)
+ /* 6.66% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_6_66 \
+ (UINT32_C(0x1) << 12)
+ /* 13.33% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_13_33 \
+ (UINT32_C(0x2) << 12)
+ /* 20% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_20 \
+ (UINT32_C(0x3) << 12)
+ /* 26.66% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_26_66 \
+ (UINT32_C(0x4) << 12)
+ /* 33% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_33_33 \
+ (UINT32_C(0x5) << 12)
+ /* 40% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_40 \
+ (UINT32_C(0x6) << 12)
+ /* 46.66% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_46_66 \
+ (UINT32_C(0x7) << 12)
+ /* 53.33% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_53_33 \
+ (UINT32_C(0x8) << 12)
+ /* 60% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_60 \
+ (UINT32_C(0x9) << 12)
+ /* 66.66% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_66_66 \
+ (UINT32_C(0xa) << 12)
+ /* 53.33% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_73_33 \
+ (UINT32_C(0xb) << 12)
+ /* 80% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_80 \
+ (UINT32_C(0xc) << 12)
+ /* 86.66% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_86_66 \
+ (UINT32_C(0xd) << 12)
+ /* 93.33% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_93_33 \
+ (UINT32_C(0xe) << 12)
+ /* 100% of the max tx rate */
+ #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_100 \
+ (UINT32_C(0xf) << 12)
+ #define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_LAST \
+ HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_100
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***************************
+ * hwrm_func_drv_if_change *
+ ***************************/
+
+
+/* hwrm_func_drv_if_change_input (size:192b/24B) */
+struct hwrm_func_drv_if_change_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * When this bit is '1', the function driver is indicating
+ * that the IF state is changing to UP state. The call should
+ * be made at the beginning of the driver's open call before
+ * resources are allocated. After making the call, the driver
+ * should check the response to see if any resources may have
+ * changed (see the response below). If the driver fails
+ * the open call, the driver should make this call again with
+ * this bit cleared to indicate that the IF state is not UP.
+ * During the driver's close call when the IF state is changing
+ * to DOWN, the driver should make this call with the bit cleared
+ * after all resources have been freed.
+ */
+ #define HWRM_FUNC_DRV_IF_CHANGE_INPUT_FLAGS_UP UINT32_C(0x1)
+ uint32_t unused;
+} __rte_packed;
+
+/* hwrm_func_drv_if_change_output (size:128b/16B) */
+struct hwrm_func_drv_if_change_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t flags;
+ /*
+ * When this bit is '1', it indicates that the resources reserved
+ * for this function may have changed. The driver should check
+ * resource capabilities and reserve resources again before
+ * allocating resources.
+ */
+ #define HWRM_FUNC_DRV_IF_CHANGE_OUTPUT_FLAGS_RESC_CHANGE \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', it indicates that the firmware got changed / reset.
+ * The driver should do complete re-initialization when that bit is set.
+ */
+ #define HWRM_FUNC_DRV_IF_CHANGE_OUTPUT_FLAGS_HOT_FW_RESET_DONE \
+ UINT32_C(0x2)
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************************
+ * hwrm_func_host_pf_ids_query *
+ *******************************/
+
+
+/* hwrm_func_host_pf_ids_query_input (size:192b/24B) */
+struct hwrm_func_host_pf_ids_query_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint8_t host;
+ /*
+ * # If this bit is set to '1', the query will contain PF(s)
+ * belongs to SOC host.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_HOST_SOC UINT32_C(0x1)
+ /*
+ * # If this bit is set to '1', the query will contain PF(s)
+ * belongs to EP0 host.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_HOST_EP_0 UINT32_C(0x2)
+ /*
+ * # If this bit is set to '1', the query will contain PF(s)
+ * belongs to EP1 host.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_HOST_EP_1 UINT32_C(0x4)
+ /*
+ * # If this bit is set to '1', the query will contain PF(s)
+ * belongs to EP2 host.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_HOST_EP_2 UINT32_C(0x8)
+ /*
+ * # If this bit is set to '1', the query will contain PF(s)
+ * belongs to EP3 host.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_HOST_EP_3 UINT32_C(0x10)
+ /*
+ * This provides a filter of what PF(s) will be returned in the
+ * query..
+ */
+ uint8_t filter;
+ /*
+ * all available PF(s) belong to the host(s) (defined in the
+ * host field). This includes the hidden PFs.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_FILTER_ALL UINT32_C(0x0)
+ /*
+ * all available PF(s) belong to the host(s) (defined in the
+ * host field) that is available for L2 traffic.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_FILTER_L2 UINT32_C(0x1)
+ /*
+ * all available PF(s) belong to the host(s) (defined in the
+ * host field) that is available for ROCE traffic.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_FILTER_ROCE UINT32_C(0x2)
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_FILTER_LAST \
+ HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_FILTER_ROCE
+ uint8_t unused_1[6];
+} __rte_packed;
+
+/* hwrm_func_host_pf_ids_query_output (size:128b/16B) */
+struct hwrm_func_host_pf_ids_query_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* This provides the first PF ID of the device. */
+ uint16_t first_pf_id;
+ uint16_t pf_ordinal_mask;
+ /*
+ * When this bit is '1', it indicates first PF belongs to one of
+ * the hosts defined in the input request.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_0 \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', it indicates 2nd PF belongs to one of the
+ * hosts defined in the input request.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_1 \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', it indicates 3rd PF belongs to one of the
+ * hosts defined in the input request.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_2 \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', it indicates 4th PF belongs to one of the
+ * hosts defined in the input request.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_3 \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', it indicates 5th PF belongs to one of the
+ * hosts defined in the input request.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_4 \
+ UINT32_C(0x10)
+ /*
+ * When this bit is '1', it indicates 6th PF belongs to one of the
+ * hosts defined in the input request.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_5 \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1', it indicates 7th PF belongs to one of the
+ * hosts defined in the input request.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_6 \
+ UINT32_C(0x40)
+ /*
+ * When this bit is '1', it indicates 8th PF belongs to one of the
+ * hosts defined in the input request.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_7 \
+ UINT32_C(0x80)
+ /*
+ * When this bit is '1', it indicates 9th PF belongs to one of the
+ * hosts defined in the input request.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_8 \
+ UINT32_C(0x100)
+ /*
+ * When this bit is '1', it indicates 10th PF belongs to one of the
+ * hosts defined in the input request.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_9 \
+ UINT32_C(0x200)
+ /*
+ * When this bit is '1', it indicates 11th PF belongs to one of the
+ * hosts defined in the input request.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_10 \
+ UINT32_C(0x400)
+ /*
+ * When this bit is '1', it indicates 12th PF belongs to one of the
+ * hosts defined in the input request.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_11 \
+ UINT32_C(0x800)
+ /*
+ * When this bit is '1', it indicates 13th PF belongs to one of the
+ * hosts defined in the input request.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_12 \
+ UINT32_C(0x1000)
+ /*
+ * When this bit is '1', it indicates 14th PF belongs to one of the
+ * hosts defined in the input request.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_13 \
+ UINT32_C(0x2000)
+ /*
+ * When this bit is '1', it indicates 15th PF belongs to one of the
+ * hosts defined in the input request.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_14 \
+ UINT32_C(0x4000)
+ /*
+ * When this bit is '1', it indicates 16th PF belongs to one of the
+ * hosts defined in the input request.
+ */
+ #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_15 \
+ UINT32_C(0x8000)
+ uint8_t unused_1[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*********************
+ * hwrm_port_phy_cfg *
+ *********************/
+
+
+/* hwrm_port_phy_cfg_input (size:448b/56B) */
+struct hwrm_port_phy_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * When this bit is set to '1', the PHY for the port shall
+ * be reset.
+ *
+ * # If this bit is set to 1, then the HWRM shall reset the
+ * PHY after applying PHY configuration changes specified
+ * in this command.
+ * # In order to guarantee that PHY configuration changes
+ * specified in this command take effect, the HWRM
+ * client should set this flag to 1.
+ * # If this bit is not set to 1, then the HWRM may reset
+ * the PHY depending on the current PHY configuration and
+ * settings specified in this command.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESET_PHY \
+ UINT32_C(0x1)
+ /* deprecated bit. Do not use!!! */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_DEPRECATED \
+ UINT32_C(0x2)
+ /*
+ * When this bit is set to '1', and the force_pam4_link_speed
+ * bit in the 'enables' field is '0', the link shall be forced
+ * to the force_link_speed value.
+ *
+ * When this bit is set to '1', and the force_pam4_link_speed
+ * bit in the 'enables' field is '1', the link shall be forced
+ * to the force_pam4_link_speed value.
+ *
+ * When this bit is set to '1', the HWRM client should
+ * not enable any of the auto negotiation related
+ * fields represented by auto_XXX fields in this command.
+ * When this bit is set to '1' and the HWRM client has
+ * enabled a auto_XXX field in this command, then the
+ * HWRM shall ignore the enabled auto_XXX field.
+ *
+ * When this bit is set to zero, the link
+ * shall be allowed to autoneg.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE \
+ UINT32_C(0x4)
+ /*
+ * When this bit is set to '1', the auto-negotiation process
+ * shall be restarted on the link.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESTART_AUTONEG \
+ UINT32_C(0x8)
+ /*
+ * When this bit is set to '1', Energy Efficient Ethernet
+ * (EEE) is requested to be enabled on this link.
+ * If EEE is not supported on this port, then this flag
+ * shall be ignored by the HWRM.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_ENABLE \
+ UINT32_C(0x10)
+ /*
+ * When this bit is set to '1', Energy Efficient Ethernet
+ * (EEE) is requested to be disabled on this link.
+ * If EEE is not supported on this port, then this flag
+ * shall be ignored by the HWRM.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_DISABLE \
+ UINT32_C(0x20)
+ /*
+ * When this bit is set to '1' and EEE is enabled on this
+ * link, then TX LPI is requested to be enabled on the link.
+ * If EEE is not supported on this port, then this flag
+ * shall be ignored by the HWRM.
+ * If EEE is disabled on this port, then this flag shall be
+ * ignored by the HWRM.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI_ENABLE \
+ UINT32_C(0x40)
+ /*
+ * When this bit is set to '1' and EEE is enabled on this
+ * link, then TX LPI is requested to be disabled on the link.
+ * If EEE is not supported on this port, then this flag
+ * shall be ignored by the HWRM.
+ * If EEE is disabled on this port, then this flag shall be
+ * ignored by the HWRM.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI_DISABLE \
+ UINT32_C(0x80)
+ /*
+ * When set to 1, then the HWRM shall enable FEC autonegotitation
+ * on this port if supported. When enabled, at least one of the
+ * FEC modes must be advertised by enabling the fec_clause_74_enable,
+ * fec_clause_91_enable, fec_rs544_1xn_enable, or fec_rs544_2xn_enable
+ * flag. If none of the FEC mode is currently enabled, the HWRM
+ * shall choose a default advertisement setting.
+ * The default advertisement setting can be queried by calling
+ * hwrm_port_phy_qcfg. Note that the link speed must be
+ * in autonegotiation mode for FEC autonegotiation to take effect.
+ * When set to 0, then this flag shall be ignored.
+ * If FEC autonegotiation is not supported, then the HWRM shall ignore this
+ * flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_ENABLE \
+ UINT32_C(0x100)
+ /*
+ * When set to 1, then the HWRM shall disable FEC autonegotiation
+ * on this port if supported.
+ * When set to 0, then this flag shall be ignored.
+ * If FEC autonegotiation is not supported, then the HWRM shall ignore this
+ * flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_DISABLE \
+ UINT32_C(0x200)
+ /*
+ * When set to 1, then the HWRM shall enable FEC CLAUSE 74 (Fire Code)
+ * on this port if supported, by advertising FEC CLAUSE 74 if
+ * FEC autonegotiation is enabled or force enabled otherwise.
+ * When set to 0, then this flag shall be ignored.
+ * If FEC CLAUSE 74 is not supported, then the HWRM shall ignore this
+ * flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_ENABLE \
+ UINT32_C(0x400)
+ /*
+ * When set to 1, then the HWRM shall disable FEC CLAUSE 74 (Fire Code)
+ * on this port if supported, by not advertising FEC CLAUSE 74 if
+ * FEC autonegotiation is enabled or force disabled otherwise.
+ * When set to 0, then this flag shall be ignored.
+ * If FEC CLAUSE 74 is not supported, then the HWRM shall ignore this
+ * flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_DISABLE \
+ UINT32_C(0x800)
+ /*
+ * When set to 1, then the HWRM shall enable FEC CLAUSE 91 (Reed Solomon)
+ * on this port if supported, by advertising FEC CLAUSE 91 if
+ * FEC autonegotiation is enabled or force enabled otherwise.
+ * When set to 0, then this flag shall be ignored.
+ * If FEC CLAUSE 91 is not supported, then the HWRM shall ignore this
+ * flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_ENABLE \
+ UINT32_C(0x1000)
+ /*
+ * When set to 1, then the HWRM shall disable FEC CLAUSE 91 (Reed Solomon)
+ * on this port if supported, by not advertising FEC CLAUSE 91 if
+ * FEC autonegotiation is enabled or force disabled otherwise.
+ * When set to 0, then this flag shall be ignored.
+ * If FEC CLAUSE 91 is not supported, then the HWRM shall ignore this
+ * flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_DISABLE \
+ UINT32_C(0x2000)
+ /*
+ * When this bit is set to '1', the link shall be forced to
+ * be taken down.
+ *
+ * # When this bit is set to '1", all other
+ * command input settings related to the link speed shall
+ * be ignored.
+ * Once the link state is forced down, it can be
+ * explicitly cleared from that state by setting this flag
+ * to '0'.
+ * # If this flag is set to '0', then the link shall be
+ * cleared from forced down state if the link is in forced
+ * down state.
+ * There may be conditions (e.g. out-of-band or sideband
+ * configuration changes for the link) outside the scope
+ * of the HWRM implementation that may clear forced down
+ * link state.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE_LINK_DWN \
+ UINT32_C(0x4000)
+ /*
+ * When set to 1, then the HWRM shall enable FEC RS544_1XN
+ * on this port if supported, by advertising FEC RS544_1XN if
+ * FEC autonegotiation is enabled or force enabled otherwise.
+ * When set to 0, then this flag shall be ignored.
+ * If FEC RS544_1XN is not supported, then the HWRM shall ignore this
+ * flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS544_1XN_ENABLE \
+ UINT32_C(0x8000)
+ /*
+ * When set to 1, then the HWRM shall disable FEC RS544_1XN
+ * on this port if supported, by not advertising FEC RS544_1XN if
+ * FEC autonegotiation is enabled or force disabled otherwise.
+ * When set to 0, then this flag shall be ignored.
+ * If FEC RS544_1XN is not supported, then the HWRM shall ignore this
+ * flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS544_1XN_DISABLE \
+ UINT32_C(0x10000)
+ /*
+ * When set to 1, then the HWRM shall enable FEC RS544_2XN
+ * on this port if supported, by advertising FEC RS544_2XN if
+ * FEC autonegotiation is enabled or force enabled otherwise.
+ * When set to 0, then this flag shall be ignored.
+ * If FEC RS544_2XN is not supported, then the HWRM shall ignore this
+ * flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS544_2XN_ENABLE \
+ UINT32_C(0x20000)
+ /*
+ * When set to 1, then the HWRM shall disable FEC RS544_2XN
+ * on this port if supported, by not advertising FEC RS544_2XN if
+ * FEC autonegotiation is enabled or force disabled otherwise.
+ * When set to 0, then this flag shall be ignored.
+ * If FEC RS544_2XN is not supported, then the HWRM shall ignore this
+ * flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS544_2XN_DISABLE \
+ UINT32_C(0x40000)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the auto_mode field to be
+ * configured.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_MODE \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the auto_duplex field to be
+ * configured.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_DUPLEX \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the auto_pause field to be
+ * configured.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_PAUSE \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the auto_link_speed field to be
+ * configured.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the auto_link_speed_mask field to be
+ * configured.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED_MASK \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the wirespeed field to be
+ * configured.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_WIRESPEED \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the lpbk field to be
+ * configured.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_LPBK \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the preemphasis field to be
+ * configured.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_PREEMPHASIS \
+ UINT32_C(0x80)
+ /*
+ * This bit must be '1' for the force_pause field to be
+ * configured.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_FORCE_PAUSE \
+ UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the eee_link_speed_mask field to be
+ * configured.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_EEE_LINK_SPEED_MASK \
+ UINT32_C(0x200)
+ /*
+ * This bit must be '1' for the tx_lpi_timer field to be
+ * configured.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_TX_LPI_TIMER \
+ UINT32_C(0x400)
+ /* Port ID of port that is to be configured. */
+ uint16_t port_id;
+ /*
+ * This is the speed that will be used if the force
+ * bit is '1'. If unsupported speed is selected, an error
+ * will be generated.
+ */
+ uint16_t force_link_speed;
+ /* 100Mb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100MB UINT32_C(0x1)
+ /* 1Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_1GB UINT32_C(0xa)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_2GB UINT32_C(0x14)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_2_5GB UINT32_C(0x19)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10GB UINT32_C(0x64)
+ /* 20Mb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_20GB UINT32_C(0xc8)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_25GB UINT32_C(0xfa)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_40GB UINT32_C(0x190)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_50GB UINT32_C(0x1f4)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100GB UINT32_C(0x3e8)
+ /* 200Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_200GB UINT32_C(0x7d0)
+ /* 10Mb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10MB UINT32_C(0xffff)
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_LAST \
+ HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10MB
+ /*
+ * This value is used to identify what autoneg mode is
+ * used when the link speed is not being forced.
+ */
+ uint8_t auto_mode;
+ /* Disable autoneg or autoneg disabled. No speeds are selected. */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_NONE UINT32_C(0x0)
+ /* Select all possible speeds for autoneg mode. */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ALL_SPEEDS UINT32_C(0x1)
+ /*
+ * Select only the auto_link_speed speed for autoneg mode. This mode has
+ * been DEPRECATED. An HWRM client should not use this mode.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_SPEED UINT32_C(0x2)
+ /*
+ * Select the auto_link_speed or any speed below that speed for autoneg.
+ * This mode has been DEPRECATED. An HWRM client should not use this mode.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_OR_BELOW UINT32_C(0x3)
+ /*
+ * Select the speeds based on the corresponding link speed mask value
+ * that is provided.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_SPEED_MASK UINT32_C(0x4)
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_LAST \
+ HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_SPEED_MASK
+ /*
+ * This is the duplex setting that will be used if the autoneg_mode
+ * is "one_speed" or "one_or_below".
+ */
+ uint8_t auto_duplex;
+ /* Half Duplex will be requested. */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_HALF UINT32_C(0x0)
+ /* Full duplex will be requested. */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_FULL UINT32_C(0x1)
+ /* Both Half and Full dupex will be requested. */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_BOTH UINT32_C(0x2)
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_LAST \
+ HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_BOTH
+ /*
+ * This value is used to configure the pause that will be
+ * used for autonegotiation.
+ * Add text on the usage of auto_pause and force_pause.
+ */
+ uint8_t auto_pause;
+ /*
+ * When this bit is '1', Generation of tx pause messages
+ * has been requested. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_TX \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', Reception of rx pause messages
+ * has been requested. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_RX \
+ UINT32_C(0x2)
+ /*
+ * When set to 1, the advertisement of pause is enabled.
+ *
+ * # When the auto_mode is not set to none and this flag is
+ * set to 1, then the auto_pause bits on this port are being
+ * advertised and autoneg pause results are being interpreted.
+ * # When the auto_mode is not set to none and this
+ * flag is set to 0, the pause is forced as indicated in
+ * force_pause, and also advertised as auto_pause bits, but
+ * the autoneg results are not interpreted since the pause
+ * configuration is being forced.
+ * # When the auto_mode is set to none and this flag is set to
+ * 1, auto_pause bits should be ignored and should be set to 0.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_AUTONEG_PAUSE \
+ UINT32_C(0x4)
+ uint8_t unused_0;
+ /*
+ * This is the speed that will be used if the autoneg_mode
+ * is "one_speed" or "one_or_below". If an unsupported speed
+ * is selected, an error will be generated.
+ */
+ uint16_t auto_link_speed;
+ /* 100Mb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100MB UINT32_C(0x1)
+ /* 1Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_1GB UINT32_C(0xa)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_2GB UINT32_C(0x14)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_2_5GB UINT32_C(0x19)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10GB UINT32_C(0x64)
+ /* 20Mb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_20GB UINT32_C(0xc8)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_25GB UINT32_C(0xfa)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_40GB UINT32_C(0x190)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_50GB UINT32_C(0x1f4)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8)
+ /* 200Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_200GB UINT32_C(0x7d0)
+ /* 10Mb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10MB UINT32_C(0xffff)
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_LAST \
+ HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10MB
+ /*
+ * This is a mask of link speeds that will be used if
+ * autoneg_mode is "mask". If unsupported speed is enabled
+ * an error will be generated.
+ */
+ uint16_t auto_link_speed_mask;
+ /* 100Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MBHD \
+ UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MB \
+ UINT32_C(0x2)
+ /* 1Gb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_1GBHD \
+ UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_1GB \
+ UINT32_C(0x8)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_2GB \
+ UINT32_C(0x10)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_2_5GB \
+ UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10GB \
+ UINT32_C(0x40)
+ /* 20Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_20GB \
+ UINT32_C(0x80)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_25GB \
+ UINT32_C(0x100)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_40GB \
+ UINT32_C(0x200)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_50GB \
+ UINT32_C(0x400)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100GB \
+ UINT32_C(0x800)
+ /* 10Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MBHD \
+ UINT32_C(0x1000)
+ /* 10Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MB \
+ UINT32_C(0x2000)
+ /* 200Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_200GB \
+ UINT32_C(0x4000)
+ /* This value controls the wirespeed feature. */
+ uint8_t wirespeed;
+ /* Wirespeed feature is disabled. */
+ #define HWRM_PORT_PHY_CFG_INPUT_WIRESPEED_OFF UINT32_C(0x0)
+ /* Wirespeed feature is enabled. */
+ #define HWRM_PORT_PHY_CFG_INPUT_WIRESPEED_ON UINT32_C(0x1)
+ #define HWRM_PORT_PHY_CFG_INPUT_WIRESPEED_LAST \
+ HWRM_PORT_PHY_CFG_INPUT_WIRESPEED_ON
+ /* This value controls the loopback setting for the PHY. */
+ uint8_t lpbk;
+ /* No loopback is selected. Normal operation. */
+ #define HWRM_PORT_PHY_CFG_INPUT_LPBK_NONE UINT32_C(0x0)
+ /*
+ * The HW will be configured with local loopback such that
+ * host data is sent back to the host without modification.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_LPBK_LOCAL UINT32_C(0x1)
+ /*
+ * The HW will be configured with remote loopback such that
+ * port logic will send packets back out the transmitter that
+ * are received.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_LPBK_REMOTE UINT32_C(0x2)
+ /*
+ * The HW will be configured with external loopback such that
+ * host data is sent on the transmitter and based on the external
+ * loopback connection the data will be received without modification.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_LPBK_EXTERNAL UINT32_C(0x3)
+ #define HWRM_PORT_PHY_CFG_INPUT_LPBK_LAST \
+ HWRM_PORT_PHY_CFG_INPUT_LPBK_EXTERNAL
+ /*
+ * This value is used to configure the pause that will be
+ * used for force mode.
+ */
+ uint8_t force_pause;
+ /*
+ * When this bit is '1', Generation of tx pause messages
+ * is supported. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_TX UINT32_C(0x1)
+ /*
+ * When this bit is '1', Reception of rx pause messages
+ * is supported. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_RX UINT32_C(0x2)
+ uint8_t unused_1;
+ /*
+ * This value controls the pre-emphasis to be used for the
+ * link. Driver should not set this value (use
+ * enable.preemphasis = 0) unless driver is sure of setting.
+ * Normally HWRM FW will determine proper pre-emphasis.
+ */
+ uint32_t preemphasis;
+ /*
+ * Setting for link speed mask that is used to
+ * advertise speeds during autonegotiation when EEE is enabled.
+ * This field is valid only when EEE is enabled.
+ * The speeds specified in this field shall be a subset of
+ * speeds specified in auto_link_speed_mask.
+ * If EEE is enabled,then at least one speed shall be provided
+ * in this mask.
+ */
+ uint16_t eee_link_speed_mask;
+ /* Reserved */
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD1 \
+ UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_100MB \
+ UINT32_C(0x2)
+ /* Reserved */
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD2 \
+ UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_1GB \
+ UINT32_C(0x8)
+ /* Reserved */
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD3 \
+ UINT32_C(0x10)
+ /* Reserved */
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD4 \
+ UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_10GB \
+ UINT32_C(0x40)
+ /*
+ * This is the speed that will be used if the force and force_pam4
+ * bits are '1'. If unsupported speed is selected, an error
+ * will be generated.
+ */
+ uint16_t force_pam4_link_speed;
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAM4_LINK_SPEED_50GB \
+ UINT32_C(0x1f4)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAM4_LINK_SPEED_100GB \
+ UINT32_C(0x3e8)
+ /* 200Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAM4_LINK_SPEED_200GB \
+ UINT32_C(0x7d0)
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAM4_LINK_SPEED_LAST \
+ HWRM_PORT_PHY_CFG_INPUT_FORCE_PAM4_LINK_SPEED_200GB
+ /*
+ * Requested setting of TX LPI timer in microseconds.
+ * This field is valid only when EEE is enabled and TX LPI is
+ * enabled.
+ */
+ uint32_t tx_lpi_timer;
+ #define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_MASK UINT32_C(0xffffff)
+ #define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_SFT 0
+ uint32_t unused_3;
+} __rte_packed;
+
+/* hwrm_port_phy_cfg_output (size:128b/16B) */
+struct hwrm_port_phy_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/* hwrm_port_phy_cfg_cmd_err (size:64b/8B) */
+struct hwrm_port_phy_cfg_cmd_err {
+ /*
+ * command specific error codes that goes to
+ * the cmd_err field in Common HWRM Error Response.
+ */
+ uint8_t code;
+ /* Unknown error */
+ #define HWRM_PORT_PHY_CFG_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0)
+ /* Unable to complete operation due to invalid speed */
+ #define HWRM_PORT_PHY_CFG_CMD_ERR_CODE_ILLEGAL_SPEED UINT32_C(0x1)
+ /*
+ * retry the command since the phy is not ready.
+ * retry count is returned in opaque_0.
+ * This is only valid for the first command and
+ * this value will not change for successive calls.
+ * but if a 0 is returned at any time then this should
+ * be treated as an un recoverable failure,
+ *
+ * retry interval in milli seconds is returned in opaque_1.
+ * This specifies the time that user should wait before
+ * issuing the next port_phy_cfg command.
+ */
+ #define HWRM_PORT_PHY_CFG_CMD_ERR_CODE_RETRY UINT32_C(0x2)
+ #define HWRM_PORT_PHY_CFG_CMD_ERR_CODE_LAST \
+ HWRM_PORT_PHY_CFG_CMD_ERR_CODE_RETRY
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/**********************
+ * hwrm_port_phy_qcfg *
+ **********************/
+
+
+/* hwrm_port_phy_qcfg_input (size:192b/24B) */
+struct hwrm_port_phy_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port that is to be queried. */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_port_phy_qcfg_output (size:768b/96B) */
+struct hwrm_port_phy_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* This value indicates the current link status. */
+ uint8_t link;
+ /* There is no link or cable detected. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_NO_LINK UINT32_C(0x0)
+ /* There is no link, but a cable has been detected. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SIGNAL UINT32_C(0x1)
+ /* There is a link. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LINK UINT32_C(0x2)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LINK
+ uint8_t unused_0;
+ /* This value indicates the current link speed of the connection. */
+ uint16_t link_speed;
+ /* 100Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100MB UINT32_C(0x1)
+ /* 1Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_1GB UINT32_C(0xa)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2GB UINT32_C(0x14)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2_5GB UINT32_C(0x19)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10GB UINT32_C(0x64)
+ /* 20Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_20GB UINT32_C(0xc8)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_25GB UINT32_C(0xfa)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_40GB UINT32_C(0x190)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_50GB UINT32_C(0x1f4)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100GB UINT32_C(0x3e8)
+ /* 200Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_200GB UINT32_C(0x7d0)
+ /* 10Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10MB UINT32_C(0xffff)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10MB
+ /*
+ * This value is indicates the duplex of the current
+ * configuration.
+ */
+ uint8_t duplex_cfg;
+ /* Half Duplex connection. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_CFG_HALF UINT32_C(0x0)
+ /* Full duplex connection. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_CFG_FULL UINT32_C(0x1)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_CFG_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_CFG_FULL
+ /*
+ * This value is used to indicate the current
+ * pause configuration. When autoneg is enabled, this value
+ * represents the autoneg results of pause configuration.
+ */
+ uint8_t pause;
+ /*
+ * When this bit is '1', Generation of tx pause messages
+ * is supported. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_TX UINT32_C(0x1)
+ /*
+ * When this bit is '1', Reception of rx pause messages
+ * is supported. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_RX UINT32_C(0x2)
+ /*
+ * The supported speeds for the port. This is a bit mask.
+ * For each speed that is supported, the corrresponding
+ * bit will be set to '1'.
+ */
+ uint16_t support_speeds;
+ /* 100Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MBHD \
+ UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MB \
+ UINT32_C(0x2)
+ /* 1Gb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GBHD \
+ UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GB \
+ UINT32_C(0x8)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2GB \
+ UINT32_C(0x10)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2_5GB \
+ UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10GB \
+ UINT32_C(0x40)
+ /* 20Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_20GB \
+ UINT32_C(0x80)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_25GB \
+ UINT32_C(0x100)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_40GB \
+ UINT32_C(0x200)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_50GB \
+ UINT32_C(0x400)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100GB \
+ UINT32_C(0x800)
+ /* 10Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MBHD \
+ UINT32_C(0x1000)
+ /* 10Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MB \
+ UINT32_C(0x2000)
+ /* 200Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_200GB \
+ UINT32_C(0x4000)
+ /*
+ * Current setting of forced link speed.
+ * When the link speed is not being forced, this
+ * value shall be set to 0.
+ */
+ uint16_t force_link_speed;
+ /* 100Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100MB UINT32_C(0x1)
+ /* 1Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_1GB UINT32_C(0xa)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2GB UINT32_C(0x14)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2_5GB UINT32_C(0x19)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10GB UINT32_C(0x64)
+ /* 20Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_20GB UINT32_C(0xc8)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_25GB UINT32_C(0xfa)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_40GB \
+ UINT32_C(0x190)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_50GB \
+ UINT32_C(0x1f4)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100GB \
+ UINT32_C(0x3e8)
+ /* 200Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_200GB \
+ UINT32_C(0x7d0)
+ /* 10Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10MB \
+ UINT32_C(0xffff)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10MB
+ /* Current setting of auto negotiation mode. */
+ uint8_t auto_mode;
+ /* Disable autoneg or autoneg disabled. No speeds are selected. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_NONE UINT32_C(0x0)
+ /* Select all possible speeds for autoneg mode. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ALL_SPEEDS UINT32_C(0x1)
+ /*
+ * Select only the auto_link_speed speed for autoneg mode. This mode has
+ * been DEPRECATED. An HWRM client should not use this mode.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_SPEED UINT32_C(0x2)
+ /*
+ * Select the auto_link_speed or any speed below that speed for autoneg.
+ * This mode has been DEPRECATED. An HWRM client should not use this mode.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_OR_BELOW UINT32_C(0x3)
+ /*
+ * Select the speeds based on the corresponding link speed mask value
+ * that is provided.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_SPEED_MASK UINT32_C(0x4)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_SPEED_MASK
+ /*
+ * Current setting of pause autonegotiation.
+ * Move autoneg_pause flag here.
+ */
+ uint8_t auto_pause;
+ /*
+ * When this bit is '1', Generation of tx pause messages
+ * has been requested. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_TX \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', Reception of rx pause messages
+ * has been requested. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_RX \
+ UINT32_C(0x2)
+ /*
+ * When set to 1, the advertisement of pause is enabled.
+ *
+ * # When the auto_mode is not set to none and this flag is
+ * set to 1, then the auto_pause bits on this port are being
+ * advertised and autoneg pause results are being interpreted.
+ * # When the auto_mode is not set to none and this
+ * flag is set to 0, the pause is forced as indicated in
+ * force_pause, and also advertised as auto_pause bits, but
+ * the autoneg results are not interpreted since the pause
+ * configuration is being forced.
+ * # When the auto_mode is set to none and this flag is set to
+ * 1, auto_pause bits should be ignored and should be set to 0.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_AUTONEG_PAUSE \
+ UINT32_C(0x4)
+ /*
+ * Current setting for auto_link_speed. This field is only
+ * valid when auto_mode is set to "one_speed" or "one_or_below".
+ */
+ uint16_t auto_link_speed;
+ /* 100Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100MB UINT32_C(0x1)
+ /* 1Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_1GB UINT32_C(0xa)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_2GB UINT32_C(0x14)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_2_5GB UINT32_C(0x19)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10GB UINT32_C(0x64)
+ /* 20Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_20GB UINT32_C(0xc8)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_25GB UINT32_C(0xfa)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_40GB UINT32_C(0x190)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_50GB UINT32_C(0x1f4)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8)
+ /* 200Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_200GB UINT32_C(0x7d0)
+ /* 10Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10MB \
+ UINT32_C(0xffff)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10MB
+ /*
+ * Current setting for auto_link_speed_mask that is used to
+ * advertise speeds during autonegotiation.
+ * This field is only valid when auto_mode is set to "mask".
+ * The speeds specified in this field shall be a subset of
+ * supported speeds on this port.
+ */
+ uint16_t auto_link_speed_mask;
+ /* 100Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100MBHD \
+ UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100MB \
+ UINT32_C(0x2)
+ /* 1Gb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GBHD \
+ UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GB \
+ UINT32_C(0x8)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_2GB \
+ UINT32_C(0x10)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_2_5GB \
+ UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10GB \
+ UINT32_C(0x40)
+ /* 20Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_20GB \
+ UINT32_C(0x80)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_25GB \
+ UINT32_C(0x100)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_40GB \
+ UINT32_C(0x200)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_50GB \
+ UINT32_C(0x400)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100GB \
+ UINT32_C(0x800)
+ /* 10Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MBHD \
+ UINT32_C(0x1000)
+ /* 10Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MB \
+ UINT32_C(0x2000)
+ /* 200Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_200GB \
+ UINT32_C(0x4000)
+ /* Current setting for wirespeed. */
+ uint8_t wirespeed;
+ /* Wirespeed feature is disabled. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_WIRESPEED_OFF UINT32_C(0x0)
+ /* Wirespeed feature is enabled. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_WIRESPEED_ON UINT32_C(0x1)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_WIRESPEED_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_WIRESPEED_ON
+ /* Current setting for loopback. */
+ uint8_t lpbk;
+ /* No loopback is selected. Normal operation. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_NONE UINT32_C(0x0)
+ /*
+ * The HW will be configured with local loopback such that
+ * host data is sent back to the host without modification.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_LOCAL UINT32_C(0x1)
+ /*
+ * The HW will be configured with remote loopback such that
+ * port logic will send packets back out the transmitter that
+ * are received.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2)
+ /*
+ * The HW will be configured with external loopback such that
+ * host data is sent on the transmitter and based on the external
+ * loopback connection the data will be received without modification.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_EXTERNAL UINT32_C(0x3)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_EXTERNAL
+ /*
+ * Current setting of forced pause.
+ * When the pause configuration is not being forced, then
+ * this value shall be set to 0.
+ */
+ uint8_t force_pause;
+ /*
+ * When this bit is '1', Generation of tx pause messages
+ * is supported. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_TX UINT32_C(0x1)
+ /*
+ * When this bit is '1', Reception of rx pause messages
+ * is supported. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_RX UINT32_C(0x2)
+ /*
+ * This value indicates the current status of the optics module on
+ * this port.
+ */
+ uint8_t module_status;
+ /* Module is inserted and accepted */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NONE \
+ UINT32_C(0x0)
+ /* Module is rejected and transmit side Laser is disabled. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_DISABLETX \
+ UINT32_C(0x1)
+ /* Module mismatch warning. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_WARNINGMSG \
+ UINT32_C(0x2)
+ /* Module is rejected and powered down. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_PWRDOWN \
+ UINT32_C(0x3)
+ /* Module is not inserted. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTINSERTED \
+ UINT32_C(0x4)
+ /* Module is powered down because of over current fault. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_CURRENTFAULT \
+ UINT32_C(0x5)
+ /* Module status is not applicable. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTAPPLICABLE \
+ UINT32_C(0xff)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTAPPLICABLE
+ /* Current setting for preemphasis. */
+ uint32_t preemphasis;
+ /* This field represents the major version of the PHY. */
+ uint8_t phy_maj;
+ /* This field represents the minor version of the PHY. */
+ uint8_t phy_min;
+ /* This field represents the build version of the PHY. */
+ uint8_t phy_bld;
+ /* This value represents a PHY type. */
+ uint8_t phy_type;
+ /* Unknown */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_UNKNOWN \
+ UINT32_C(0x0)
+ /* BASE-CR */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASECR \
+ UINT32_C(0x1)
+ /* BASE-KR4 (Deprecated) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR4 \
+ UINT32_C(0x2)
+ /* BASE-LR */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASELR \
+ UINT32_C(0x3)
+ /* BASE-SR */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASESR \
+ UINT32_C(0x4)
+ /* BASE-KR2 (Deprecated) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR2 \
+ UINT32_C(0x5)
+ /* BASE-KX */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKX \
+ UINT32_C(0x6)
+ /* BASE-KR */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR \
+ UINT32_C(0x7)
+ /* BASE-T */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASET \
+ UINT32_C(0x8)
+ /* EEE capable BASE-T */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASETE \
+ UINT32_C(0x9)
+ /* SGMII connected external PHY */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_SGMIIEXTPHY \
+ UINT32_C(0xa)
+ /* 25G_BASECR_CA_L */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_L \
+ UINT32_C(0xb)
+ /* 25G_BASECR_CA_S */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_S \
+ UINT32_C(0xc)
+ /* 25G_BASECR_CA_N */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_N \
+ UINT32_C(0xd)
+ /* 25G_BASESR */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASESR \
+ UINT32_C(0xe)
+ /* 100G_BASECR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASECR4 \
+ UINT32_C(0xf)
+ /* 100G_BASESR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASESR4 \
+ UINT32_C(0x10)
+ /* 100G_BASELR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASELR4 \
+ UINT32_C(0x11)
+ /* 100G_BASEER4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASEER4 \
+ UINT32_C(0x12)
+ /* 100G_BASESR10 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASESR10 \
+ UINT32_C(0x13)
+ /* 40G_BASECR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASECR4 \
+ UINT32_C(0x14)
+ /* 40G_BASESR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASESR4 \
+ UINT32_C(0x15)
+ /* 40G_BASELR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASELR4 \
+ UINT32_C(0x16)
+ /* 40G_BASEER4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASEER4 \
+ UINT32_C(0x17)
+ /* 40G_ACTIVE_CABLE */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_ACTIVE_CABLE \
+ UINT32_C(0x18)
+ /* 1G_baseT */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASET \
+ UINT32_C(0x19)
+ /* 1G_baseSX */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASESX \
+ UINT32_C(0x1a)
+ /* 1G_baseCX */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASECX \
+ UINT32_C(0x1b)
+ /* 100G_BASECR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_200G_BASECR4 \
+ UINT32_C(0x1c)
+ /* 100G_BASESR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_200G_BASESR4 \
+ UINT32_C(0x1d)
+ /* 100G_BASELR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_200G_BASELR4 \
+ UINT32_C(0x1e)
+ /* 100G_BASEER4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_200G_BASEER4 \
+ UINT32_C(0x1f)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_200G_BASEER4
+ /* This value represents a media type. */
+ uint8_t media_type;
+ /* Unknown */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_UNKNOWN UINT32_C(0x0)
+ /* Twisted Pair */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_TP UINT32_C(0x1)
+ /* Direct Attached Copper */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_DAC UINT32_C(0x2)
+ /* Fiber */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_FIBRE UINT32_C(0x3)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_FIBRE
+ /* This value represents a transceiver type. */
+ uint8_t xcvr_pkg_type;
+ /* PHY and MAC are in the same package */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_INTERNAL \
+ UINT32_C(0x1)
+ /* PHY and MAC are in different packages */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_EXTERNAL \
+ UINT32_C(0x2)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_EXTERNAL
+ uint8_t eee_config_phy_addr;
+ /* This field represents PHY address. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_MASK \
+ UINT32_C(0x1f)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_SFT 0
+ /*
+ * This field represents flags related to EEE configuration.
+ * These EEE configuration flags are valid only when the
+ * auto_mode is not set to none (in other words autonegotiation
+ * is enabled).
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_MASK \
+ UINT32_C(0xe0)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_SFT 5
+ /*
+ * When set to 1, Energy Efficient Ethernet (EEE) mode is enabled.
+ * Speeds for autoneg with EEE mode enabled
+ * are based on eee_link_speed_mask.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ENABLED \
+ UINT32_C(0x20)
+ /*
+ * This flag is valid only when eee_enabled is set to 1.
+ *
+ * # If eee_enabled is set to 0, then EEE mode is disabled
+ * and this flag shall be ignored.
+ * # If eee_enabled is set to 1 and this flag is set to 1,
+ * then Energy Efficient Ethernet (EEE) mode is enabled
+ * and in use.
+ * # If eee_enabled is set to 1 and this flag is set to 0,
+ * then Energy Efficient Ethernet (EEE) mode is enabled
+ * but is currently not in use.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ACTIVE \
+ UINT32_C(0x40)
+ /*
+ * This flag is valid only when eee_enabled is set to 1.
+ *
+ * # If eee_enabled is set to 0, then EEE mode is disabled
+ * and this flag shall be ignored.
+ * # If eee_enabled is set to 1 and this flag is set to 1,
+ * then Energy Efficient Ethernet (EEE) mode is enabled
+ * and TX LPI is enabled.
+ * # If eee_enabled is set to 1 and this flag is set to 0,
+ * then Energy Efficient Ethernet (EEE) mode is enabled
+ * but TX LPI is disabled.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_TX_LPI \
+ UINT32_C(0x80)
+ /*
+ * When set to 1, the parallel detection is used to determine
+ * the speed of the link partner.
+ *
+ * Parallel detection is used when a autonegotiation capable
+ * device is connected to a link parter that is not capable
+ * of autonegotiation.
+ */
+ uint8_t parallel_detect;
+ /*
+ * When set to 1, the parallel detection is used to determine
+ * the speed of the link partner.
+ *
+ * Parallel detection is used when a autonegotiation capable
+ * device is connected to a link parter that is not capable
+ * of autonegotiation.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PARALLEL_DETECT UINT32_C(0x1)
+ /*
+ * The advertised speeds for the port by the link partner.
+ * Each advertised speed will be set to '1'.
+ */
+ uint16_t link_partner_adv_speeds;
+ /* 100Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MBHD \
+ UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MB \
+ UINT32_C(0x2)
+ /* 1Gb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GBHD \
+ UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GB \
+ UINT32_C(0x8)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_2GB \
+ UINT32_C(0x10)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_2_5GB \
+ UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10GB \
+ UINT32_C(0x40)
+ /* 20Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_20GB \
+ UINT32_C(0x80)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_25GB \
+ UINT32_C(0x100)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_40GB \
+ UINT32_C(0x200)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_50GB \
+ UINT32_C(0x400)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100GB \
+ UINT32_C(0x800)
+ /* 10Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MBHD \
+ UINT32_C(0x1000)
+ /* 10Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MB \
+ UINT32_C(0x2000)
+ /*
+ * The advertised autoneg for the port by the link partner.
+ * This field is deprecated and should be set to 0.
+ */
+ uint8_t link_partner_adv_auto_mode;
+ /* Disable autoneg or autoneg disabled. No speeds are selected. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_NONE \
+ UINT32_C(0x0)
+ /* Select all possible speeds for autoneg mode. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ALL_SPEEDS \
+ UINT32_C(0x1)
+ /*
+ * Select only the auto_link_speed speed for autoneg mode. This mode has
+ * been DEPRECATED. An HWRM client should not use this mode.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_SPEED \
+ UINT32_C(0x2)
+ /*
+ * Select the auto_link_speed or any speed below that speed for autoneg.
+ * This mode has been DEPRECATED. An HWRM client should not use this mode.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_OR_BELOW \
+ UINT32_C(0x3)
+ /*
+ * Select the speeds based on the corresponding link speed mask value
+ * that is provided.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_SPEED_MASK \
+ UINT32_C(0x4)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_SPEED_MASK
+ /* The advertised pause settings on the port by the link partner. */
+ uint8_t link_partner_adv_pause;
+ /*
+ * When this bit is '1', Generation of tx pause messages
+ * is supported. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_PAUSE_TX \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', Reception of rx pause messages
+ * is supported. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_PAUSE_RX \
+ UINT32_C(0x2)
+ /*
+ * Current setting for link speed mask that is used to
+ * advertise speeds during autonegotiation when EEE is enabled.
+ * This field is valid only when eee_enabled flags is set to 1.
+ * The speeds specified in this field shall be a subset of
+ * speeds specified in auto_link_speed_mask.
+ */
+ uint16_t adv_eee_link_speed_mask;
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD1 \
+ UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_100MB \
+ UINT32_C(0x2)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD2 \
+ UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_1GB \
+ UINT32_C(0x8)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD3 \
+ UINT32_C(0x10)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD4 \
+ UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_10GB \
+ UINT32_C(0x40)
+ /*
+ * Current setting for link speed mask that is advertised by
+ * the link partner when EEE is enabled.
+ * This field is valid only when eee_enabled flags is set to 1.
+ */
+ uint16_t link_partner_adv_eee_link_speed_mask;
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD1 \
+ UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_100MB \
+ UINT32_C(0x2)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD2 \
+ UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_1GB \
+ UINT32_C(0x8)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD3 \
+ UINT32_C(0x10)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD4 \
+ UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_10GB \
+ UINT32_C(0x40)
+ uint32_t xcvr_identifier_type_tx_lpi_timer;
+ /*
+ * Current setting of TX LPI timer in microseconds.
+ * This field is valid only when_eee_enabled flag is set to 1
+ * and tx_lpi_enabled is set to 1.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_MASK \
+ UINT32_C(0xffffff)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_SFT 0
+ /* This value represents transceiver identifier type. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_MASK \
+ UINT32_C(0xff000000)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFT 24
+ /* Unknown */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_UNKNOWN \
+ (UINT32_C(0x0) << 24)
+ /* SFP/SFP+/SFP28 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFP \
+ (UINT32_C(0x3) << 24)
+ /* QSFP+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP \
+ (UINT32_C(0xc) << 24)
+ /* QSFP+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFPPLUS \
+ (UINT32_C(0xd) << 24)
+ /* QSFP28 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP28 \
+ (UINT32_C(0x11) << 24)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP28
+ /*
+ * This value represents the current configuration of
+ * Forward Error Correction (FEC) on the port.
+ */
+ uint16_t fec_cfg;
+ /*
+ * When set to 1, then FEC is not supported on this port. If this flag
+ * is set to 1, then all other FEC configuration flags shall be ignored.
+ * When set to 0, then FEC is supported as indicated by other
+ * configuration flags.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_NONE_SUPPORTED \
+ UINT32_C(0x1)
+ /*
+ * When set to 1, then FEC autonegotiation is supported on this port.
+ * When set to 0, then FEC autonegotiation is not supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * When set to 1, then FEC autonegotiation is enabled on this port.
+ * When set to 0, then FEC autonegotiation is disabled if supported.
+ * This flag should be ignored if FEC autonegotiation is not supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_ENABLED \
+ UINT32_C(0x4)
+ /*
+ * When set to 1, then FEC CLAUSE 74 (Fire Code) is supported on this port.
+ * When set to 0, then FEC CLAUSE 74 (Fire Code) is not supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * When set to 1, then FEC CLAUSE 74 (Fire Code) is enabled on this
+ * port. This means that FEC CLAUSE 74 is either advertised if
+ * FEC autonegotiation is enabled or FEC CLAUSE 74 is force enabled.
+ * When set to 0, then FEC CLAUSE 74 (Fire Code) is disabled if supported.
+ * This flag should be ignored if FEC CLAUSE 74 is not supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_ENABLED \
+ UINT32_C(0x10)
+ /*
+ * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is supported on this port.
+ * When set to 0, then FEC CLAUSE 91 (Reed Solomon) is not supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_SUPPORTED \
+ UINT32_C(0x20)
+ /*
+ * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is enabled on this
+ * port. This means that FEC CLAUSE 91 is either advertised if
+ * FEC autonegotiation is enabled or FEC CLAUSE 91 is force enabled.
+ * When set to 0, then FEC CLAUSE 91 (Reed Solomon) is disabled if supported.
+ * This flag should be ignored if FEC CLAUSE 91 is not supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_ENABLED \
+ UINT32_C(0x40)
+ /*
+ * When set to 1, then FEC RS544_1XN is supported on this port.
+ * When set to 0, then FEC RS544_1XN is not supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_1XN_SUPPORTED \
+ UINT32_C(0x80)
+ /*
+ * When set to 1, then RS544_1XN is enabled on this
+ * port. This means that FEC RS544_1XN is either advertised if
+ * FEC autonegotiation is enabled or FEC RS544_1XN is force enabled.
+ * When set to 0, then FEC RS544_1XN is disabled if supported.
+ * This flag should be ignored if FEC RS544_1XN is not supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_1XN_ENABLED \
+ UINT32_C(0x100)
+ /*
+ * When set to 1, then FEC RS544_2XN is supported on this port.
+ * When set to 0, then FEC RS544_2XN is not supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_2XN_SUPPORTED \
+ UINT32_C(0x200)
+ /*
+ * When set to 1, then RS544_2XN is enabled on this
+ * port. This means that FEC RS544_2XN is either advertised if
+ * FEC autonegotiation is enabled or FEC RS544_2XN is force enabled.
+ * When set to 0, then FEC RS544_2XN is disabled if supported.
+ * This flag should be ignored if FEC RS544_2XN is not supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_2XN_ENABLED \
+ UINT32_C(0x400)
+ /*
+ * When set to 1, then FEC CLAUSE 74 (Fire Code) is active on this
+ * port, either successfully autonegoatiated or forced.
+ * When set to 0, then FEC CLAUSE 74 (Fire Code) is not active.
+ * This flag is only valid when link is up on this port.
+ * At most only one active FEC flags (fec_clause74_active,
+ * fec_clause91_active, fec_rs544_1xn, fec_rs544_2xn) can be set.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_ACTIVE \
+ UINT32_C(0x800)
+ /*
+ * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is active on this
+ * port, either successfully autonegoatiated or forced.
+ * When set to 0, then FEC CLAUSE 91 (Reed Solomon) is not active.
+ * This flag is only valid when link is up on this port.
+ * At most only one active FEC flags (fec_clause74_active,
+ * fec_clause91_active, fec_rs544_1xn, fec_rs544_2xn) can be set.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_ACTIVE \
+ UINT32_C(0x1000)
+ /*
+ * When set to 1, then FEC RS544_1XN is active on this
+ * port, either successfully autonegoatiated or forced.
+ * When set to 0, then FEC RS544_1XN is not active.
+ * This flag is only valid when link is up on this port.
+ * At most only one active FEC flags (fec_clause74_active,
+ * fec_clause91_active, fec_rs544_1xn, fec_rs544_2xn) can be set.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_1XN_ACTIVE \
+ UINT32_C(0x2000)
+ /*
+ * When set to 1, then FEC RS544_2XN is active on this
+ * port, either successfully autonegoatiated or forced.
+ * When set to 0, then FEC RS544_2XN is not active.
+ * This flag is only valid when link is up on this port.
+ * At most only one active FEC flags (fec_clause74_active,
+ * fec_clause91_active, fec_rs544_1xn, fec_rs544_2xn) can be set.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_2XN_ACTIVE \
+ UINT32_C(0x4000)
+ /*
+ * This value is indicates the duplex of the current
+ * connection state.
+ */
+ uint8_t duplex_state;
+ /* Half Duplex connection. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_HALF UINT32_C(0x0)
+ /* Full duplex connection. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_FULL UINT32_C(0x1)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_FULL
+ /* Option flags fields. */
+ uint8_t option_flags;
+ /* When this bit is '1', Media auto detect is enabled. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_OPTION_FLAGS_MEDIA_AUTO_DETECT \
+ UINT32_C(0x1)
+ /*
+ * Up to 16 bytes of null padded ASCII string representing
+ * PHY vendor.
+ * If the string is set to null, then the vendor name is not
+ * available.
+ */
+ char phy_vendor_name[16];
+ /*
+ * Up to 16 bytes of null padded ASCII string that
+ * identifies vendor specific part number of the PHY.
+ * If the string is set to null, then the vendor specific
+ * part number is not available.
+ */
+ char phy_vendor_partnumber[16];
+ uint8_t unused_2[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*********************
+ * hwrm_port_mac_cfg *
+ *********************/
+
+
+/* hwrm_port_mac_cfg_input (size:384b/48B) */
+struct hwrm_port_mac_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * In this field, there are a number of CoS mappings related flags
+ * that are used to configure CoS mappings and their corresponding
+ * priorities in the hardware.
+ * For the priorities of CoS mappings, the HWRM uses the following
+ * priority order (high to low) by default:
+ * # vlan pri
+ * # ip_dscp
+ * # tunnel_vlan_pri
+ * # default cos
+ *
+ * A subset of CoS mappings can be enabled.
+ * If a priority is not specified for an enabled CoS mapping, the
+ * priority will be assigned in the above order for the enabled CoS
+ * mappings. For example, if vlan_pri and ip_dscp CoS mappings are
+ * enabled and their priorities are not specified, the following
+ * priority order (high to low) will be used by the HWRM:
+ * # vlan_pri
+ * # ip_dscp
+ * # default cos
+ *
+ * vlan_pri CoS mapping together with default CoS with lower priority
+ * are enabled by default by the HWRM.
+ */
+ uint32_t flags;
+ /*
+ * When this bit is '1', this command will configure
+ * the MAC to match the current link state of the PHY.
+ * If the link is not established on the PHY, then this
+ * bit has no effect.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_MATCH_LINK \
+ UINT32_C(0x1)
+ /*
+ * When this bit is set to '1', the inner VLAN PRI to CoS mapping
+ * is requested to be enabled.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_VLAN_PRI2COS_ENABLE \
+ UINT32_C(0x2)
+ /*
+ * When this bit is set to '1', tunnel VLAN PRI field to
+ * CoS mapping is requested to be enabled.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_TUNNEL_PRI2COS_ENABLE \
+ UINT32_C(0x4)
+ /*
+ * When this bit is set to '1', the IP DSCP to CoS mapping is
+ * requested to be enabled.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_IP_DSCP2COS_ENABLE \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', the HWRM is requested to
+ * enable timestamp capture capability on the receive side
+ * of this port.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_RX_TS_CAPTURE_ENABLE \
+ UINT32_C(0x10)
+ /*
+ * When this bit is '1', the HWRM is requested to
+ * disable timestamp capture capability on the receive side
+ * of this port.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_RX_TS_CAPTURE_DISABLE \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1', the HWRM is requested to
+ * enable timestamp capture capability on the transmit side
+ * of this port.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_TX_TS_CAPTURE_ENABLE \
+ UINT32_C(0x40)
+ /*
+ * When this bit is '1', the HWRM is requested to
+ * disable timestamp capture capability on the transmit side
+ * of this port.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_TX_TS_CAPTURE_DISABLE \
+ UINT32_C(0x80)
+ /*
+ * When this bit is '1', the Out-Of-Box WoL is requested to
+ * be enabled on this port.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_OOB_WOL_ENABLE \
+ UINT32_C(0x100)
+ /*
+ * When this bit is '1', the Out-Of-Box WoL is requested to
+ * be disabled on this port.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_OOB_WOL_DISABLE \
+ UINT32_C(0x200)
+ /*
+ * When this bit is set to '1', the inner VLAN PRI to CoS mapping
+ * is requested to be disabled.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_VLAN_PRI2COS_DISABLE \
+ UINT32_C(0x400)
+ /*
+ * When this bit is set to '1', tunnel VLAN PRI field to
+ * CoS mapping is requested to be disabled.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_TUNNEL_PRI2COS_DISABLE \
+ UINT32_C(0x800)
+ /*
+ * When this bit is set to '1', the IP DSCP to CoS mapping is
+ * requested to be disabled.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_IP_DSCP2COS_DISABLE \
+ UINT32_C(0x1000)
+ /*
+ * When this bit is set to '1', and the ptp_tx_ts_capture_enable
+ * bit is set, then the device uses one step Tx timestamping.
+ * This bit is temporary and used for experimental purposes.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_ONE_STEP_TX_TS \
+ UINT32_C(0x2000)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the ipg field to be
+ * configured.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_IPG \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the lpbk field to be
+ * configured.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_LPBK \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the vlan_pri2cos_map_pri field to be
+ * configured.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_VLAN_PRI2COS_MAP_PRI \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the tunnel_pri2cos_map_pri field to be
+ * configured.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_TUNNEL_PRI2COS_MAP_PRI \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the dscp2cos_map_pri field to be
+ * configured.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_DSCP2COS_MAP_PRI \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the rx_ts_capture_ptp_msg_type field to be
+ * configured.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_RX_TS_CAPTURE_PTP_MSG_TYPE \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the tx_ts_capture_ptp_msg_type field to be
+ * configured.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_TX_TS_CAPTURE_PTP_MSG_TYPE \
+ UINT32_C(0x80)
+ /*
+ * This bit must be '1' for the cos_field_cfg field to be
+ * configured.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_COS_FIELD_CFG \
+ UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the ptp_freq_adj_ppb field to be
+ * configured.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_PTP_FREQ_ADJ_PPB \
+ UINT32_C(0x200)
+ /* Port ID of port that is to be configured. */
+ uint16_t port_id;
+ /*
+ * This value is used to configure the minimum IPG that will
+ * be sent between packets by this port.
+ */
+ uint8_t ipg;
+ /* This value controls the loopback setting for the MAC. */
+ uint8_t lpbk;
+ /* No loopback is selected. Normal operation. */
+ #define HWRM_PORT_MAC_CFG_INPUT_LPBK_NONE UINT32_C(0x0)
+ /*
+ * The HW will be configured with local loopback such that
+ * host data is sent back to the host without modification.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_LPBK_LOCAL UINT32_C(0x1)
+ /*
+ * The HW will be configured with remote loopback such that
+ * port logic will send packets back out the transmitter that
+ * are received.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_LPBK_REMOTE UINT32_C(0x2)
+ #define HWRM_PORT_MAC_CFG_INPUT_LPBK_LAST \
+ HWRM_PORT_MAC_CFG_INPUT_LPBK_REMOTE
+ /*
+ * This value controls the priority setting of VLAN PRI to CoS
+ * mapping based on VLAN Tags of inner packet headers of
+ * tunneled packets or packet headers of non-tunneled packets.
+ *
+ * # Each XXX_pri variable shall have a unique priority value
+ * when it is being specified.
+ * # When comparing priorities of mappings, higher value
+ * indicates higher priority.
+ * For example, a value of 0-3 is returned where 0 is being
+ * the lowest priority and 3 is being the highest priority.
+ */
+ uint8_t vlan_pri2cos_map_pri;
+ /* Reserved field. */
+ uint8_t reserved1;
+ /*
+ * This value controls the priority setting of VLAN PRI to CoS
+ * mapping based on VLAN Tags of tunneled header.
+ * This mapping only applies when tunneled headers
+ * are present.
+ *
+ * # Each XXX_pri variable shall have a unique priority value
+ * when it is being specified.
+ * # When comparing priorities of mappings, higher value
+ * indicates higher priority.
+ * For example, a value of 0-3 is returned where 0 is being
+ * the lowest priority and 3 is being the highest priority.
+ */
+ uint8_t tunnel_pri2cos_map_pri;
+ /*
+ * This value controls the priority setting of IP DSCP to CoS
+ * mapping based on inner IP header of tunneled packets or
+ * IP header of non-tunneled packets.
+ *
+ * # Each XXX_pri variable shall have a unique priority value
+ * when it is being specified.
+ * # When comparing priorities of mappings, higher value
+ * indicates higher priority.
+ * For example, a value of 0-3 is returned where 0 is being
+ * the lowest priority and 3 is being the highest priority.
+ */
+ uint8_t dscp2pri_map_pri;
+ /*
+ * This is a 16-bit bit mask that is used to request a
+ * specific configuration of time stamp capture of PTP messages
+ * on the receive side of this port.
+ * This field shall be ignored if the ptp_rx_ts_capture_enable
+ * flag is not set in this command.
+ * Otherwise, if bit 'i' is set, then the HWRM is being
+ * requested to configure the receive side of the port to
+ * capture the time stamp of every received PTP message
+ * with messageType field value set to i.
+ */
+ uint16_t rx_ts_capture_ptp_msg_type;
+ /*
+ * This is a 16-bit bit mask that is used to request a
+ * specific configuration of time stamp capture of PTP messages
+ * on the transmit side of this port.
+ * This field shall be ignored if the ptp_tx_ts_capture_enable
+ * flag is not set in this command.
+ * Otherwise, if bit 'i' is set, then the HWRM is being
+ * requested to configure the transmit side of the port to
+ * capture the time stamp of every transmitted PTP message
+ * with messageType field value set to i.
+ */
+ uint16_t tx_ts_capture_ptp_msg_type;
+ /* Configuration of CoS fields. */
+ uint8_t cos_field_cfg;
+ /* Reserved */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_RSVD1 \
+ UINT32_C(0x1)
+ /*
+ * This field is used to specify selection of VLAN PRI value
+ * based on whether one or two VLAN Tags are present in
+ * the inner packet headers of tunneled packets or
+ * non-tunneled packets.
+ * This field is valid only if inner VLAN PRI to CoS mapping
+ * is enabled.
+ * If VLAN PRI to CoS mapping is not enabled, then this
+ * field shall be ignored.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_MASK \
+ UINT32_C(0x6)
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_SFT \
+ 1
+ /*
+ * Select inner VLAN PRI when 1 or 2 VLAN Tags are
+ * present in the inner packet headers
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_INNERMOST \
+ (UINT32_C(0x0) << 1)
+ /*
+ * Select outer VLAN Tag PRI when 2 VLAN Tags are
+ * present in the inner packet headers.
+ * No VLAN PRI shall be selected for this configuration
+ * if only one VLAN Tag is present in the inner
+ * packet headers.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_OUTER \
+ (UINT32_C(0x1) << 1)
+ /*
+ * Select outermost VLAN PRI when 1 or 2 VLAN Tags
+ * are present in the inner packet headers
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_OUTERMOST \
+ (UINT32_C(0x2) << 1)
+ /* Unspecified */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED \
+ (UINT32_C(0x3) << 1)
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_LAST \
+ HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED
+ /*
+ * This field is used to specify selection of tunnel VLAN
+ * PRI value based on whether one or two VLAN Tags are
+ * present in tunnel headers.
+ * This field is valid only if tunnel VLAN PRI to CoS mapping
+ * is enabled.
+ * If tunnel VLAN PRI to CoS mapping is not enabled, then this
+ * field shall be ignored.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_MASK \
+ UINT32_C(0x18)
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_SFT \
+ 3
+ /*
+ * Select inner VLAN PRI when 1 or 2 VLAN Tags are
+ * present in the tunnel packet headers
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_INNERMOST \
+ (UINT32_C(0x0) << 3)
+ /*
+ * Select outer VLAN Tag PRI when 2 VLAN Tags are
+ * present in the tunnel packet headers.
+ * No tunnel VLAN PRI shall be selected for this
+ * configuration if only one VLAN Tag is present in
+ * the tunnel packet headers.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTER \
+ (UINT32_C(0x1) << 3)
+ /*
+ * Select outermost VLAN PRI when 1 or 2 VLAN Tags
+ * are present in the tunnel packet headers
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTERMOST \
+ (UINT32_C(0x2) << 3)
+ /* Unspecified */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED \
+ (UINT32_C(0x3) << 3)
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_LAST \
+ HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED
+ /*
+ * This field shall be used to provide default CoS value
+ * that has been configured on this port.
+ * This field is valid only if default CoS mapping
+ * is enabled.
+ * If default CoS mapping is not enabled, then this
+ * field shall be ignored.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_DEFAULT_COS_MASK \
+ UINT32_C(0xe0)
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_DEFAULT_COS_SFT \
+ 5
+ uint8_t unused_0[3];
+ /*
+ * This signed field specifies by how much to adjust the frequency
+ * of sync timer updates (measured in parts per billion).
+ */
+ int32_t ptp_freq_adj_ppb;
+ uint8_t unused_1[4];
+} __rte_packed;
+
+/* hwrm_port_mac_cfg_output (size:128b/16B) */
+struct hwrm_port_mac_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * This is the configured maximum length of Ethernet packet
+ * payload that is allowed to be received on the port.
+ * This value does not include the number of bytes used by
+ * Ethernet header and trailer (CRC).
+ */
+ uint16_t mru;
+ /*
+ * This is the configured maximum length of Ethernet packet
+ * payload that is allowed to be transmitted on the port.
+ * This value does not include the number of bytes used by
+ * Ethernet header and trailer (CRC).
+ */
+ uint16_t mtu;
+ /* Current configuration of the IPG value. */
+ uint8_t ipg;
+ /* Current value of the loopback value. */
+ uint8_t lpbk;
+ /* No loopback is selected. Normal operation. */
+ #define HWRM_PORT_MAC_CFG_OUTPUT_LPBK_NONE UINT32_C(0x0)
+ /*
+ * The HW will be configured with local loopback such that
+ * host data is sent back to the host without modification.
+ */
+ #define HWRM_PORT_MAC_CFG_OUTPUT_LPBK_LOCAL UINT32_C(0x1)
+ /*
+ * The HW will be configured with remote loopback such that
+ * port logic will send packets back out the transmitter that
+ * are received.
+ */
+ #define HWRM_PORT_MAC_CFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2)
+ #define HWRM_PORT_MAC_CFG_OUTPUT_LPBK_LAST \
+ HWRM_PORT_MAC_CFG_OUTPUT_LPBK_REMOTE
+ uint8_t unused_0;
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************
+ * hwrm_port_mac_qcfg *
+ **********************/
+
+
+/* hwrm_port_mac_qcfg_input (size:192b/24B) */
+struct hwrm_port_mac_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port that is to be configured. */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_port_mac_qcfg_output (size:256b/32B) */
+struct hwrm_port_mac_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * This is the configured maximum length of Ethernet packet
+ * payload that is allowed to be received on the port.
+ * This value does not include the number of bytes used by the
+ * Ethernet header and trailer (CRC).
+ */
+ uint16_t mru;
+ /*
+ * This is the configured maximum length of Ethernet packet
+ * payload that is allowed to be transmitted on the port.
+ * This value does not include the number of bytes used by the
+ * Ethernet header and trailer (CRC).
+ */
+ uint16_t mtu;
+ /*
+ * The minimum IPG that will
+ * be sent between packets by this port.
+ */
+ uint8_t ipg;
+ /* The loopback setting for the MAC. */
+ uint8_t lpbk;
+ /* No loopback is selected. Normal operation. */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_NONE UINT32_C(0x0)
+ /*
+ * The HW will be configured with local loopback such that
+ * host data is sent back to the host without modification.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_LOCAL UINT32_C(0x1)
+ /*
+ * The HW will be configured with remote loopback such that
+ * port logic will send packets back out the transmitter that
+ * are received.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2)
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_LAST \
+ HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_REMOTE
+ /*
+ * Priority setting for VLAN PRI to CoS mapping.
+ * # Each XXX_pri variable shall have a unique priority value
+ * when it is being used.
+ * # When comparing priorities of mappings, higher value
+ * indicates higher priority.
+ * For example, a value of 0-3 is returned where 0 is being
+ * the lowest priority and 3 is being the highest priority.
+ * # If the correspoding CoS mapping is not enabled, then this
+ * field should be ignored.
+ * # This value indicates the normalized priority value retained
+ * in the HWRM.
+ */
+ uint8_t vlan_pri2cos_map_pri;
+ /*
+ * In this field, a number of CoS mappings related flags
+ * are used to indicate configured CoS mappings.
+ */
+ uint8_t flags;
+ /*
+ * When this bit is set to '1', the inner VLAN PRI to CoS mapping
+ * is enabled.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_VLAN_PRI2COS_ENABLE \
+ UINT32_C(0x1)
+ /*
+ * When this bit is set to '1', tunnel VLAN PRI field to
+ * CoS mapping is enabled.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_TUNNEL_PRI2COS_ENABLE \
+ UINT32_C(0x2)
+ /*
+ * When this bit is set to '1', the IP DSCP to CoS mapping is
+ * enabled.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_IP_DSCP2COS_ENABLE \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', the Out-Of-Box WoL is enabled on this
+ * port.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_OOB_WOL_ENABLE \
+ UINT32_C(0x8)
+ /* When this bit is '1', PTP is enabled for RX on this port. */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_PTP_RX_TS_CAPTURE_ENABLE \
+ UINT32_C(0x10)
+ /* When this bit is '1', PTP is enabled for TX on this port. */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_PTP_TX_TS_CAPTURE_ENABLE \
+ UINT32_C(0x20)
+ /*
+ * Priority setting for tunnel VLAN PRI to CoS mapping.
+ * # Each XXX_pri variable shall have a unique priority value
+ * when it is being used.
+ * # When comparing priorities of mappings, higher value
+ * indicates higher priority.
+ * For example, a value of 0-3 is returned where 0 is being
+ * the lowest priority and 3 is being the highest priority.
+ * # If the correspoding CoS mapping is not enabled, then this
+ * field should be ignored.
+ * # This value indicates the normalized priority value retained
+ * in the HWRM.
+ */
+ uint8_t tunnel_pri2cos_map_pri;
+ /*
+ * Priority setting for DSCP to PRI mapping.
+ * # Each XXX_pri variable shall have a unique priority value
+ * when it is being used.
+ * # When comparing priorities of mappings, higher value
+ * indicates higher priority.
+ * For example, a value of 0-3 is returned where 0 is being
+ * the lowest priority and 3 is being the highest priority.
+ * # If the correspoding CoS mapping is not enabled, then this
+ * field should be ignored.
+ * # This value indicates the normalized priority value retained
+ * in the HWRM.
+ */
+ uint8_t dscp2pri_map_pri;
+ /*
+ * This is a 16-bit bit mask that represents the
+ * current configuration of time stamp capture of PTP messages
+ * on the receive side of this port.
+ * If bit 'i' is set, then the receive side of the port
+ * is configured to capture the time stamp of every
+ * received PTP message with messageType field value set
+ * to i.
+ * If all bits are set to 0 (i.e. field value set 0),
+ * then the receive side of the port is not configured
+ * to capture timestamp for PTP messages.
+ * If all bits are set to 1, then the receive side of the
+ * port is configured to capture timestamp for all PTP
+ * messages.
+ */
+ uint16_t rx_ts_capture_ptp_msg_type;
+ /*
+ * This is a 16-bit bit mask that represents the
+ * current configuration of time stamp capture of PTP messages
+ * on the transmit side of this port.
+ * If bit 'i' is set, then the transmit side of the port
+ * is configured to capture the time stamp of every
+ * received PTP message with messageType field value set
+ * to i.
+ * If all bits are set to 0 (i.e. field value set 0),
+ * then the transmit side of the port is not configured
+ * to capture timestamp for PTP messages.
+ * If all bits are set to 1, then the transmit side of the
+ * port is configured to capture timestamp for all PTP
+ * messages.
+ */
+ uint16_t tx_ts_capture_ptp_msg_type;
+ /* Configuration of CoS fields. */
+ uint8_t cos_field_cfg;
+ /* Reserved */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_RSVD \
+ UINT32_C(0x1)
+ /*
+ * This field is used for selecting VLAN PRI value
+ * based on whether one or two VLAN Tags are present in
+ * the inner packet headers of tunneled packets or
+ * non-tunneled packets.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_MASK \
+ UINT32_C(0x6)
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_SFT \
+ 1
+ /*
+ * Select inner VLAN PRI when 1 or 2 VLAN Tags are
+ * present in the inner packet headers
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_INNERMOST \
+ (UINT32_C(0x0) << 1)
+ /*
+ * Select outer VLAN Tag PRI when 2 VLAN Tags are
+ * present in the inner packet headers.
+ * No VLAN PRI is selected for this configuration
+ * if only one VLAN Tag is present in the inner
+ * packet headers.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_OUTER \
+ (UINT32_C(0x1) << 1)
+ /*
+ * Select outermost VLAN PRI when 1 or 2 VLAN Tags
+ * are present in the inner packet headers
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_OUTERMOST \
+ (UINT32_C(0x2) << 1)
+ /* Unspecified */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED \
+ (UINT32_C(0x3) << 1)
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_LAST \
+ HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED
+ /*
+ * This field is used for selecting tunnel VLAN PRI value
+ * based on whether one or two VLAN Tags are present in
+ * the tunnel headers of tunneled packets. This selection
+ * does not apply to non-tunneled packets.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_MASK \
+ UINT32_C(0x18)
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_SFT \
+ 3
+ /*
+ * Select inner VLAN PRI when 1 or 2 VLAN Tags are
+ * present in the tunnel packet headers
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_INNERMOST \
+ (UINT32_C(0x0) << 3)
+ /*
+ * Select outer VLAN Tag PRI when 2 VLAN Tags are
+ * present in the tunnel packet headers.
+ * No VLAN PRI is selected for this configuration
+ * if only one VLAN Tag is present in the tunnel
+ * packet headers.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTER \
+ (UINT32_C(0x1) << 3)
+ /*
+ * Select outermost VLAN PRI when 1 or 2 VLAN Tags
+ * are present in the tunnel packet headers
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTERMOST \
+ (UINT32_C(0x2) << 3)
+ /* Unspecified */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED \
+ (UINT32_C(0x3) << 3)
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_LAST \
+ HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED
+ /*
+ * This field is used to provide default CoS value that
+ * has been configured on this port.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_DEFAULT_COS_MASK \
+ UINT32_C(0xe0)
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_DEFAULT_COS_SFT \
+ 5
+ uint8_t unused_1;
+ uint16_t port_svif_info;
+ /*
+ * This field specifies the source virtual interface of the port being
+ * queried. Drivers can use this to program port svif field in the
+ * L2 context table
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_PORT_SVIF_INFO_PORT_SVIF_MASK \
+ UINT32_C(0x7fff)
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_PORT_SVIF_INFO_PORT_SVIF_SFT 0
+ /* This field specifies whether port_svif is valid or not */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_PORT_SVIF_INFO_PORT_SVIF_VALID \
+ UINT32_C(0x8000)
+ uint8_t unused_2[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**************************
+ * hwrm_port_mac_ptp_qcfg *
+ **************************/
+
+
+/* hwrm_port_mac_ptp_qcfg_input (size:192b/24B) */
+struct hwrm_port_mac_ptp_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port that is being queried. */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_port_mac_ptp_qcfg_output (size:640b/80B) */
+struct hwrm_port_mac_ptp_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * In this field, a number of PTP related flags
+ * are used to indicate configured PTP capabilities.
+ */
+ uint8_t flags;
+ /*
+ * When this bit is set to '1', the PTP related registers are
+ * directly accessible by the host.
+ */
+ #define HWRM_PORT_MAC_PTP_QCFG_OUTPUT_FLAGS_DIRECT_ACCESS \
+ UINT32_C(0x1)
+ /*
+ * When this bit is set to '1', the device supports one-step
+ * Tx timestamping.
+ */
+ #define HWRM_PORT_MAC_PTP_QCFG_OUTPUT_FLAGS_ONE_STEP_TX_TS \
+ UINT32_C(0x4)
+ /*
+ * When this bit is set to '1', the PTP information is accessible
+ * via HWRM commands.
+ */
+ #define HWRM_PORT_MAC_PTP_QCFG_OUTPUT_FLAGS_HWRM_ACCESS \
+ UINT32_C(0x8)
+ uint8_t unused_0[3];
+ /* Offset of the PTP register for the lower 32 bits of timestamp for RX. */
+ uint32_t rx_ts_reg_off_lower;
+ /* Offset of the PTP register for the upper 32 bits of timestamp for RX. */
+ uint32_t rx_ts_reg_off_upper;
+ /* Offset of the PTP register for the sequence ID for RX. */
+ uint32_t rx_ts_reg_off_seq_id;
+ /* Offset of the first PTP source ID for RX. */
+ uint32_t rx_ts_reg_off_src_id_0;
+ /* Offset of the second PTP source ID for RX. */
+ uint32_t rx_ts_reg_off_src_id_1;
+ /* Offset of the third PTP source ID for RX. */
+ uint32_t rx_ts_reg_off_src_id_2;
+ /* Offset of the domain ID for RX. */
+ uint32_t rx_ts_reg_off_domain_id;
+ /* Offset of the PTP FIFO register for RX. */
+ uint32_t rx_ts_reg_off_fifo;
+ /* Offset of the PTP advance FIFO register for RX. */
+ uint32_t rx_ts_reg_off_fifo_adv;
+ /* PTP timestamp granularity for RX. */
+ uint32_t rx_ts_reg_off_granularity;
+ /* Offset of the PTP register for the lower 32 bits of timestamp for TX. */
+ uint32_t tx_ts_reg_off_lower;
+ /* Offset of the PTP register for the upper 32 bits of timestamp for TX. */
+ uint32_t tx_ts_reg_off_upper;
+ /* Offset of the PTP register for the sequence ID for TX. */
+ uint32_t tx_ts_reg_off_seq_id;
+ /* Offset of the PTP FIFO register for TX. */
+ uint32_t tx_ts_reg_off_fifo;
+ /* PTP timestamp granularity for TX. */
+ uint32_t tx_ts_reg_off_granularity;
+ uint8_t unused_1[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/* Port Tx Statistics Format */
+/* tx_port_stats (size:3264b/408B) */
+struct tx_port_stats {
+ /* Total Number of 64 Bytes frames transmitted */
+ uint64_t tx_64b_frames;
+ /* Total Number of 65-127 Bytes frames transmitted */
+ uint64_t tx_65b_127b_frames;
+ /* Total Number of 128-255 Bytes frames transmitted */
+ uint64_t tx_128b_255b_frames;
+ /* Total Number of 256-511 Bytes frames transmitted */
+ uint64_t tx_256b_511b_frames;
+ /* Total Number of 512-1023 Bytes frames transmitted */
+ uint64_t tx_512b_1023b_frames;
+ /* Total Number of 1024-1518 Bytes frames transmitted */
+ uint64_t tx_1024b_1518b_frames;
+ /*
+ * Total Number of each good VLAN (exludes FCS errors)
+ * frame transmitted which is 1519 to 1522 bytes in length
+ * inclusive (excluding framing bits but including FCS bytes).
+ */
+ uint64_t tx_good_vlan_frames;
+ /* Total Number of 1519-2047 Bytes frames transmitted */
+ uint64_t tx_1519b_2047b_frames;
+ /* Total Number of 2048-4095 Bytes frames transmitted */
+ uint64_t tx_2048b_4095b_frames;
+ /* Total Number of 4096-9216 Bytes frames transmitted */
+ uint64_t tx_4096b_9216b_frames;
+ /* Total Number of 9217-16383 Bytes frames transmitted */
+ uint64_t tx_9217b_16383b_frames;
+ /* Total Number of good frames transmitted */
+ uint64_t tx_good_frames;
+ /* Total Number of frames transmitted */
+ uint64_t tx_total_frames;
+ /* Total number of unicast frames transmitted */
+ uint64_t tx_ucast_frames;
+ /* Total number of multicast frames transmitted */
+ uint64_t tx_mcast_frames;
+ /* Total number of broadcast frames transmitted */
+ uint64_t tx_bcast_frames;
+ /* Total number of PAUSE control frames transmitted */
+ uint64_t tx_pause_frames;
+ /*
+ * Total number of PFC/per-priority PAUSE
+ * control frames transmitted
+ */
+ uint64_t tx_pfc_frames;
+ /* Total number of jabber frames transmitted */
+ uint64_t tx_jabber_frames;
+ /* Total number of frames transmitted with FCS error */
+ uint64_t tx_fcs_err_frames;
+ /* Total number of control frames transmitted */
+ uint64_t tx_control_frames;
+ /* Total number of over-sized frames transmitted */
+ uint64_t tx_oversz_frames;
+ /* Total number of frames with single deferral */
+ uint64_t tx_single_dfrl_frames;
+ /* Total number of frames with multiple deferrals */
+ uint64_t tx_multi_dfrl_frames;
+ /* Total number of frames with single collision */
+ uint64_t tx_single_coll_frames;
+ /* Total number of frames with multiple collisions */
+ uint64_t tx_multi_coll_frames;
+ /* Total number of frames with late collisions */
+ uint64_t tx_late_coll_frames;
+ /* Total number of frames with excessive collisions */
+ uint64_t tx_excessive_coll_frames;
+ /* Total number of fragmented frames transmitted */
+ uint64_t tx_frag_frames;
+ /* Total number of transmit errors */
+ uint64_t tx_err;
+ /* Total number of single VLAN tagged frames transmitted */
+ uint64_t tx_tagged_frames;
+ /* Total number of double VLAN tagged frames transmitted */
+ uint64_t tx_dbl_tagged_frames;
+ /* Total number of runt frames transmitted */
+ uint64_t tx_runt_frames;
+ /* Total number of TX FIFO under runs */
+ uint64_t tx_fifo_underruns;
+ /*
+ * Total number of PFC frames with PFC enabled bit for
+ * Pri 0 transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri0;
+ /*
+ * Total number of PFC frames with PFC enabled bit for
+ * Pri 1 transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri1;
+ /*
+ * Total number of PFC frames with PFC enabled bit for
+ * Pri 2 transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri2;
+ /*
+ * Total number of PFC frames with PFC enabled bit for
+ * Pri 3 transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri3;
+ /*
+ * Total number of PFC frames with PFC enabled bit for
+ * Pri 4 transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri4;
+ /*
+ * Total number of PFC frames with PFC enabled bit for
+ * Pri 5 transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri5;
+ /*
+ * Total number of PFC frames with PFC enabled bit for
+ * Pri 6 transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri6;
+ /*
+ * Total number of PFC frames with PFC enabled bit for
+ * Pri 7 transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri7;
+ /* Total number of EEE LPI Events on TX */
+ uint64_t tx_eee_lpi_events;
+ /* EEE LPI Duration Counter on TX */
+ uint64_t tx_eee_lpi_duration;
+ /*
+ * Total number of Link Level Flow Control (LLFC) messages
+ * transmitted
+ */
+ uint64_t tx_llfc_logical_msgs;
+ /* Total number of HCFC messages transmitted */
+ uint64_t tx_hcfc_msgs;
+ /* Total number of TX collisions */
+ uint64_t tx_total_collisions;
+ /* Total number of transmitted bytes */
+ uint64_t tx_bytes;
+ /* Total number of end-to-end HOL frames */
+ uint64_t tx_xthol_frames;
+ /* Total Tx Drops per Port reported by STATS block */
+ uint64_t tx_stat_discard;
+ /* Total Tx Error Drops per Port reported by STATS block */
+ uint64_t tx_stat_error;
+} __rte_packed;
+
+/* Port Rx Statistics Format */
+/* rx_port_stats (size:4224b/528B) */
+struct rx_port_stats {
+ /* Total Number of 64 Bytes frames received */
+ uint64_t rx_64b_frames;
+ /* Total Number of 65-127 Bytes frames received */
+ uint64_t rx_65b_127b_frames;
+ /* Total Number of 128-255 Bytes frames received */
+ uint64_t rx_128b_255b_frames;
+ /* Total Number of 256-511 Bytes frames received */
+ uint64_t rx_256b_511b_frames;
+ /* Total Number of 512-1023 Bytes frames received */
+ uint64_t rx_512b_1023b_frames;
+ /* Total Number of 1024-1518 Bytes frames received */
+ uint64_t rx_1024b_1518b_frames;
+ /*
+ * Total Number of each good VLAN (exludes FCS errors)
+ * frame received which is 1519 to 1522 bytes in length
+ * inclusive (excluding framing bits but including FCS bytes).
+ */
+ uint64_t rx_good_vlan_frames;
+ /* Total Number of 1519-2047 Bytes frames received */
+ uint64_t rx_1519b_2047b_frames;
+ /* Total Number of 2048-4095 Bytes frames received */
+ uint64_t rx_2048b_4095b_frames;
+ /* Total Number of 4096-9216 Bytes frames received */
+ uint64_t rx_4096b_9216b_frames;
+ /* Total Number of 9217-16383 Bytes frames received */
+ uint64_t rx_9217b_16383b_frames;
+ /* Total number of frames received */
+ uint64_t rx_total_frames;
+ /* Total number of unicast frames received */
+ uint64_t rx_ucast_frames;
+ /* Total number of multicast frames received */
+ uint64_t rx_mcast_frames;
+ /* Total number of broadcast frames received */
+ uint64_t rx_bcast_frames;
+ /* Total number of received frames with FCS error */
+ uint64_t rx_fcs_err_frames;
+ /* Total number of control frames received */
+ uint64_t rx_ctrl_frames;
+ /* Total number of PAUSE frames received */
+ uint64_t rx_pause_frames;
+ /* Total number of PFC frames received */
+ uint64_t rx_pfc_frames;
+ /*
+ * Total number of frames received with an unsupported
+ * opcode
+ */
+ uint64_t rx_unsupported_opcode_frames;
+ /*
+ * Total number of frames received with an unsupported
+ * DA for pause and PFC
+ */
+ uint64_t rx_unsupported_da_pausepfc_frames;
+ /* Total number of frames received with an unsupported SA */
+ uint64_t rx_wrong_sa_frames;
+ /* Total number of received packets with alignment error */
+ uint64_t rx_align_err_frames;
+ /* Total number of received frames with out-of-range length */
+ uint64_t rx_oor_len_frames;
+ /* Total number of received frames with error termination */
+ uint64_t rx_code_err_frames;
+ /*
+ * Total number of received frames with a false carrier is
+ * detected during idle, as defined by RX_ER samples active
+ * and RXD is 0xE. The event is reported along with the
+ * statistics generated on the next received frame. Only
+ * one false carrier condition can be detected and logged
+ * between frames.
+ *
+ * Carrier event, valid for 10M/100M speed modes only.
+ */
+ uint64_t rx_false_carrier_frames;
+ /* Total number of over-sized frames received */
+ uint64_t rx_ovrsz_frames;
+ /* Total number of jabber packets received */
+ uint64_t rx_jbr_frames;
+ /* Total number of received frames with MTU error */
+ uint64_t rx_mtu_err_frames;
+ /* Total number of received frames with CRC match */
+ uint64_t rx_match_crc_frames;
+ /* Total number of frames received promiscuously */
+ uint64_t rx_promiscuous_frames;
+ /*
+ * Total number of received frames with one or two VLAN
+ * tags
+ */
+ uint64_t rx_tagged_frames;
+ /* Total number of received frames with two VLAN tags */
+ uint64_t rx_double_tagged_frames;
+ /* Total number of truncated frames received */
+ uint64_t rx_trunc_frames;
+ /* Total number of good frames (without errors) received */
+ uint64_t rx_good_frames;
+ /*
+ * Total number of received PFC frames with transition from
+ * XON to XOFF on Pri 0
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri0;
+ /*
+ * Total number of received PFC frames with transition from
+ * XON to XOFF on Pri 1
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri1;
+ /*
+ * Total number of received PFC frames with transition from
+ * XON to XOFF on Pri 2
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri2;
+ /*
+ * Total number of received PFC frames with transition from
+ * XON to XOFF on Pri 3
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri3;
+ /*
+ * Total number of received PFC frames with transition from
+ * XON to XOFF on Pri 4
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri4;
+ /*
+ * Total number of received PFC frames with transition from
+ * XON to XOFF on Pri 5
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri5;
+ /*
+ * Total number of received PFC frames with transition from
+ * XON to XOFF on Pri 6
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri6;
+ /*
+ * Total number of received PFC frames with transition from
+ * XON to XOFF on Pri 7
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri7;
+ /*
+ * Total number of received PFC frames with PFC enabled
+ * bit for Pri 0
+ */
+ uint64_t rx_pfc_ena_frames_pri0;
+ /*
+ * Total number of received PFC frames with PFC enabled
+ * bit for Pri 1
+ */
+ uint64_t rx_pfc_ena_frames_pri1;
+ /*
+ * Total number of received PFC frames with PFC enabled
+ * bit for Pri 2
+ */
+ uint64_t rx_pfc_ena_frames_pri2;
+ /*
+ * Total number of received PFC frames with PFC enabled
+ * bit for Pri 3
+ */
+ uint64_t rx_pfc_ena_frames_pri3;
+ /*
+ * Total number of received PFC frames with PFC enabled
+ * bit for Pri 4
+ */
+ uint64_t rx_pfc_ena_frames_pri4;
+ /*
+ * Total number of received PFC frames with PFC enabled
+ * bit for Pri 5
+ */
+ uint64_t rx_pfc_ena_frames_pri5;
+ /*
+ * Total number of received PFC frames with PFC enabled
+ * bit for Pri 6
+ */
+ uint64_t rx_pfc_ena_frames_pri6;
+ /*
+ * Total number of received PFC frames with PFC enabled
+ * bit for Pri 7
+ */
+ uint64_t rx_pfc_ena_frames_pri7;
+ /* Total Number of frames received with SCH CRC error */
+ uint64_t rx_sch_crc_err_frames;
+ /* Total Number of under-sized frames received */
+ uint64_t rx_undrsz_frames;
+ /* Total Number of fragmented frames received */
+ uint64_t rx_frag_frames;
+ /* Total number of RX EEE LPI Events */
+ uint64_t rx_eee_lpi_events;
+ /* EEE LPI Duration Counter on RX */
+ uint64_t rx_eee_lpi_duration;
+ /*
+ * Total number of physical type Link Level Flow Control
+ * (LLFC) messages received
+ */
+ uint64_t rx_llfc_physical_msgs;
+ /*
+ * Total number of logical type Link Level Flow Control
+ * (LLFC) messages received
+ */
+ uint64_t rx_llfc_logical_msgs;
+ /*
+ * Total number of logical type Link Level Flow Control
+ * (LLFC) messages received with CRC error
+ */
+ uint64_t rx_llfc_msgs_with_crc_err;
+ /* Total number of HCFC messages received */
+ uint64_t rx_hcfc_msgs;
+ /* Total number of HCFC messages received with CRC error */
+ uint64_t rx_hcfc_msgs_with_crc_err;
+ /* Total number of received bytes */
+ uint64_t rx_bytes;
+ /* Total number of bytes received in runt frames */
+ uint64_t rx_runt_bytes;
+ /* Total number of runt frames received */
+ uint64_t rx_runt_frames;
+ /* Total Rx Discards per Port reported by STATS block */
+ uint64_t rx_stat_discard;
+ uint64_t rx_stat_err;
+} __rte_packed;
+
+/********************
+ * hwrm_port_qstats *
+ ********************/
+
+
+/* hwrm_port_qstats_input (size:320b/40B) */
+struct hwrm_port_qstats_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port that is being queried. */
+ uint16_t port_id;
+ uint8_t flags;
+ /* This value is not used to avoid backward compatibility issues. */
+ #define HWRM_PORT_QSTATS_INPUT_FLAGS_UNUSED UINT32_C(0x0)
+ /*
+ * This bit is set to 1 when request is for a counter mask,
+ * representing the width of each of the stats counters, rather
+ * than counters themselves.
+ */
+ #define HWRM_PORT_QSTATS_INPUT_FLAGS_COUNTER_MASK UINT32_C(0x1)
+ #define HWRM_PORT_QSTATS_INPUT_FLAGS_LAST \
+ HWRM_PORT_QSTATS_INPUT_FLAGS_COUNTER_MASK
+ uint8_t unused_0[5];
+ /*
+ * This is the host address where
+ * Tx port statistics will be stored
+ */
+ uint64_t tx_stat_host_addr;
+ /*
+ * This is the host address where
+ * Rx port statistics will be stored
+ */
+ uint64_t rx_stat_host_addr;
+} __rte_packed;
+
+/* hwrm_port_qstats_output (size:128b/16B) */
+struct hwrm_port_qstats_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* The size of TX port statistics block in bytes. */
+ uint16_t tx_stat_size;
+ /* The size of RX port statistics block in bytes. */
+ uint16_t rx_stat_size;
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/* Port Tx Statistics extended Format */
+/* tx_port_stats_ext (size:2048b/256B) */
+struct tx_port_stats_ext {
+ /* Total number of tx bytes count on cos queue 0 */
+ uint64_t tx_bytes_cos0;
+ /* Total number of tx bytes count on cos queue 1 */
+ uint64_t tx_bytes_cos1;
+ /* Total number of tx bytes count on cos queue 2 */
+ uint64_t tx_bytes_cos2;
+ /* Total number of tx bytes count on cos queue 3 */
+ uint64_t tx_bytes_cos3;
+ /* Total number of tx bytes count on cos queue 4 */
+ uint64_t tx_bytes_cos4;
+ /* Total number of tx bytes count on cos queue 5 */
+ uint64_t tx_bytes_cos5;
+ /* Total number of tx bytes count on cos queue 6 */
+ uint64_t tx_bytes_cos6;
+ /* Total number of tx bytes count on cos queue 7 */
+ uint64_t tx_bytes_cos7;
+ /* Total number of tx packets count on cos queue 0 */
+ uint64_t tx_packets_cos0;
+ /* Total number of tx packets count on cos queue 1 */
+ uint64_t tx_packets_cos1;
+ /* Total number of tx packets count on cos queue 2 */
+ uint64_t tx_packets_cos2;
+ /* Total number of tx packets count on cos queue 3 */
+ uint64_t tx_packets_cos3;
+ /* Total number of tx packets count on cos queue 4 */
+ uint64_t tx_packets_cos4;
+ /* Total number of tx packets count on cos queue 5 */
+ uint64_t tx_packets_cos5;
+ /* Total number of tx packets count on cos queue 6 */
+ uint64_t tx_packets_cos6;
+ /* Total number of tx packets count on cos queue 7 */
+ uint64_t tx_packets_cos7;
+ /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 0 */
+ uint64_t pfc_pri0_tx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 0 */
+ uint64_t pfc_pri0_tx_transitions;
+ /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 1 */
+ uint64_t pfc_pri1_tx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 1 */
+ uint64_t pfc_pri1_tx_transitions;
+ /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 2 */
+ uint64_t pfc_pri2_tx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 2 */
+ uint64_t pfc_pri2_tx_transitions;
+ /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 3 */
+ uint64_t pfc_pri3_tx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 3 */
+ uint64_t pfc_pri3_tx_transitions;
+ /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 4 */
+ uint64_t pfc_pri4_tx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 4 */
+ uint64_t pfc_pri4_tx_transitions;
+ /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 5 */
+ uint64_t pfc_pri5_tx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 5 */
+ uint64_t pfc_pri5_tx_transitions;
+ /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 6 */
+ uint64_t pfc_pri6_tx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 6 */
+ uint64_t pfc_pri6_tx_transitions;
+ /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 7 */
+ uint64_t pfc_pri7_tx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 7 */
+ uint64_t pfc_pri7_tx_transitions;
+} __rte_packed;
+
+/* Port Rx Statistics extended Format */
+/* rx_port_stats_ext (size:3648b/456B) */
+struct rx_port_stats_ext {
+ /* Number of times link state changed to down */
+ uint64_t link_down_events;
+ /* Number of times the idle rings with pause bit are found */
+ uint64_t continuous_pause_events;
+ /* Number of times the active rings pause bit resumed back */
+ uint64_t resume_pause_events;
+ /* Number of times, the ROCE cos queue PFC is disabled to avoid pause flood/burst */
+ uint64_t continuous_roce_pause_events;
+ /* Number of times, the ROCE cos queue PFC is enabled back */
+ uint64_t resume_roce_pause_events;
+ /* Total number of rx bytes count on cos queue 0 */
+ uint64_t rx_bytes_cos0;
+ /* Total number of rx bytes count on cos queue 1 */
+ uint64_t rx_bytes_cos1;
+ /* Total number of rx bytes count on cos queue 2 */
+ uint64_t rx_bytes_cos2;
+ /* Total number of rx bytes count on cos queue 3 */
+ uint64_t rx_bytes_cos3;
+ /* Total number of rx bytes count on cos queue 4 */
+ uint64_t rx_bytes_cos4;
+ /* Total number of rx bytes count on cos queue 5 */
+ uint64_t rx_bytes_cos5;
+ /* Total number of rx bytes count on cos queue 6 */
+ uint64_t rx_bytes_cos6;
+ /* Total number of rx bytes count on cos queue 7 */
+ uint64_t rx_bytes_cos7;
+ /* Total number of rx packets count on cos queue 0 */
+ uint64_t rx_packets_cos0;
+ /* Total number of rx packets count on cos queue 1 */
+ uint64_t rx_packets_cos1;
+ /* Total number of rx packets count on cos queue 2 */
+ uint64_t rx_packets_cos2;
+ /* Total number of rx packets count on cos queue 3 */
+ uint64_t rx_packets_cos3;
+ /* Total number of rx packets count on cos queue 4 */
+ uint64_t rx_packets_cos4;
+ /* Total number of rx packets count on cos queue 5 */
+ uint64_t rx_packets_cos5;
+ /* Total number of rx packets count on cos queue 6 */
+ uint64_t rx_packets_cos6;
+ /* Total number of rx packets count on cos queue 7 */
+ uint64_t rx_packets_cos7;
+ /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 0 */
+ uint64_t pfc_pri0_rx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 0 */
+ uint64_t pfc_pri0_rx_transitions;
+ /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 1 */
+ uint64_t pfc_pri1_rx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 1 */
+ uint64_t pfc_pri1_rx_transitions;
+ /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 2 */
+ uint64_t pfc_pri2_rx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 2 */
+ uint64_t pfc_pri2_rx_transitions;
+ /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 3 */
+ uint64_t pfc_pri3_rx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 3 */
+ uint64_t pfc_pri3_rx_transitions;
+ /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 4 */
+ uint64_t pfc_pri4_rx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 4 */
+ uint64_t pfc_pri4_rx_transitions;
+ /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 5 */
+ uint64_t pfc_pri5_rx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 5 */
+ uint64_t pfc_pri5_rx_transitions;
+ /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 6 */
+ uint64_t pfc_pri6_rx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 6 */
+ uint64_t pfc_pri6_rx_transitions;
+ /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 7 */
+ uint64_t pfc_pri7_rx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 7 */
+ uint64_t pfc_pri7_rx_transitions;
+ /* Total number of received bits */
+ uint64_t rx_bits;
+ /* The number of events where the port receive buffer was over 85% full */
+ uint64_t rx_buffer_passed_threshold;
+ /*
+ * The number of symbol errors that wasn't corrected by FEC correction
+ * alogirithm
+ */
+ uint64_t rx_pcs_symbol_err;
+ /* The number of corrected bits on the port according to active FEC */
+ uint64_t rx_corrected_bits;
+ /* Total number of rx discard bytes count on cos queue 0 */
+ uint64_t rx_discard_bytes_cos0;
+ /* Total number of rx discard bytes count on cos queue 1 */
+ uint64_t rx_discard_bytes_cos1;
+ /* Total number of rx discard bytes count on cos queue 2 */
+ uint64_t rx_discard_bytes_cos2;
+ /* Total number of rx discard bytes count on cos queue 3 */
+ uint64_t rx_discard_bytes_cos3;
+ /* Total number of rx discard bytes count on cos queue 4 */
+ uint64_t rx_discard_bytes_cos4;
+ /* Total number of rx discard bytes count on cos queue 5 */
+ uint64_t rx_discard_bytes_cos5;
+ /* Total number of rx discard bytes count on cos queue 6 */
+ uint64_t rx_discard_bytes_cos6;
+ /* Total number of rx discard bytes count on cos queue 7 */
+ uint64_t rx_discard_bytes_cos7;
+ /* Total number of rx discard packets count on cos queue 0 */
+ uint64_t rx_discard_packets_cos0;
+ /* Total number of rx discard packets count on cos queue 1 */
+ uint64_t rx_discard_packets_cos1;
+ /* Total number of rx discard packets count on cos queue 2 */
+ uint64_t rx_discard_packets_cos2;
+ /* Total number of rx discard packets count on cos queue 3 */
+ uint64_t rx_discard_packets_cos3;
+ /* Total number of rx discard packets count on cos queue 4 */
+ uint64_t rx_discard_packets_cos4;
+ /* Total number of rx discard packets count on cos queue 5 */
+ uint64_t rx_discard_packets_cos5;
+ /* Total number of rx discard packets count on cos queue 6 */
+ uint64_t rx_discard_packets_cos6;
+ /* Total number of rx discard packets count on cos queue 7 */
+ uint64_t rx_discard_packets_cos7;
+} __rte_packed;
+
+/*
+ * Port Rx Statistics extended PFC WatchDog Format.
+ * StormDetect and StormRevert event determination is based
+ * on an integration period and a percentage threshold.
+ * StormDetect event - when percentage of XOFF frames received
+ * within an integration period exceeds the configured threshold.
+ * StormRevert event - when percentage of XON frames received
+ * within an integration period exceeds the configured threshold.
+ * Actual number of XOFF/XON frames for the events to be triggered
+ * depends on both configured integration period and sampling rate.
+ * The statistics in this structure represent counts of specified
+ * events from the moment the feature (PFC WatchDog) is enabled via
+ * hwrm_queue_pfc_enable_cfg call.
+ */
+/* rx_port_stats_ext_pfc_wd (size:5120b/640B) */
+struct rx_port_stats_ext_pfc_wd {
+ /*
+ * Total number of PFC WatchDog StormDetect events detected
+ * for Pri 0
+ */
+ uint64_t rx_pfc_watchdog_storms_detected_pri0;
+ /*
+ * Total number of PFC WatchDog StormDetect events detected
+ * for Pri 1
+ */
+ uint64_t rx_pfc_watchdog_storms_detected_pri1;
+ /*
+ * Total number of PFC WatchDog StormDetect events detected
+ * for Pri 2
+ */
+ uint64_t rx_pfc_watchdog_storms_detected_pri2;
+ /*
+ * Total number of PFC WatchDog StormDetect events detected
+ * for Pri 3
+ */
+ uint64_t rx_pfc_watchdog_storms_detected_pri3;
+ /*
+ * Total number of PFC WatchDog StormDetect events detected
+ * for Pri 4
+ */
+ uint64_t rx_pfc_watchdog_storms_detected_pri4;
+ /*
+ * Total number of PFC WatchDog StormDetect events detected
+ * for Pri 5
+ */
+ uint64_t rx_pfc_watchdog_storms_detected_pri5;
+ /*
+ * Total number of PFC WatchDog StormDetect events detected
+ * for Pri 6
+ */
+ uint64_t rx_pfc_watchdog_storms_detected_pri6;
+ /*
+ * Total number of PFC WatchDog StormDetect events detected
+ * for Pri 7
+ */
+ uint64_t rx_pfc_watchdog_storms_detected_pri7;
+ /*
+ * Total number of PFC WatchDog StormRevert events detected
+ * for Pri 0
+ */
+ uint64_t rx_pfc_watchdog_storms_reverted_pri0;
+ /*
+ * Total number of PFC WatchDog StormRevert events detected
+ * for Pri 1
+ */
+ uint64_t rx_pfc_watchdog_storms_reverted_pri1;
+ /*
+ * Total number of PFC WatchDog StormRevert events detected
+ * for Pri 2
+ */
+ uint64_t rx_pfc_watchdog_storms_reverted_pri2;
+ /*
+ * Total number of PFC WatchDog StormRevert events detected
+ * for Pri 3
+ */
+ uint64_t rx_pfc_watchdog_storms_reverted_pri3;
+ /*
+ * Total number of PFC WatchDog StormRevert events detected
+ * for Pri 4
+ */
+ uint64_t rx_pfc_watchdog_storms_reverted_pri4;
+ /*
+ * Total number of PFC WatchDog StormRevert events detected
+ * for Pri 5
+ */
+ uint64_t rx_pfc_watchdog_storms_reverted_pri5;
+ /*
+ * Total number of PFC WatchDog StormRevert events detected
+ * for Pri 6
+ */
+ uint64_t rx_pfc_watchdog_storms_reverted_pri6;
+ /*
+ * Total number of PFC WatchDog StormRevert events detected
+ * for Pri 7
+ */
+ uint64_t rx_pfc_watchdog_storms_reverted_pri7;
+ /*
+ * Total number of packets received during PFC watchdog storm
+ * for pri 0
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_pri0;
+ /*
+ * Total number of packets received during PFC watchdog storm
+ * for pri 1
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_pri1;
+ /*
+ * Total number of packets received during PFC watchdog storm
+ * for pri 2
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_pri2;
+ /*
+ * Total number of packets received during PFC watchdog storm
+ * for pri 3
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_pri3;
+ /*
+ * Total number of packets received during PFC watchdog storm
+ * for pri 4
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_pri4;
+ /*
+ * Total number of packets received during PFC watchdog storm
+ * for pri 5
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_pri5;
+ /*
+ * Total number of packets received during PFC watchdog storm
+ * for pri 6
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_pri6;
+ /*
+ * Total number of packets received during PFC watchdog storm
+ * for pri 7
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_pri7;
+ /*
+ * Total number of bytes received during PFC watchdog storm
+ * for pri 0
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_pri0;
+ /*
+ * Total number of bytes received during PFC watchdog storm
+ * for pri 1
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_pri1;
+ /*
+ * Total number of bytes received during PFC watchdog storm
+ * for pri 2
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_pri2;
+ /*
+ * Total number of bytes received during PFC watchdog storm
+ * for pri 3
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_pri3;
+ /*
+ * Total number of bytes received during PFC watchdog storm
+ * for pri 4
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_pri4;
+ /*
+ * Total number of bytes received during PFC watchdog storm
+ * for pri 5
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_pri5;
+ /*
+ * Total number of bytes received during PFC watchdog storm
+ * for pri 6
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_pri6;
+ /*
+ * Total number of bytes received during PFC watchdog storm
+ * for pri 7
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_pri7;
+ /*
+ * Total number of packets dropped on rx during PFC watchdog storm
+ * for pri 0
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri0;
+ /*
+ * Total number of packets dropped on rx during PFC watchdog storm
+ * for pri 1
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri1;
+ /*
+ * Total number of packets dropped on rx during PFC watchdog storm
+ * for pri 2
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri2;
+ /*
+ * Total number of packets dropped on rx during PFC watchdog storm
+ * for pri 3
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri3;
+ /*
+ * Total number of packets dropped on rx during PFC watchdog storm
+ * for pri 4
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri4;
+ /*
+ * Total number of packets dropped on rx during PFC watchdog storm
+ * for pri 5
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri5;
+ /*
+ * Total number of packets dropped on rx during PFC watchdog storm
+ * for pri 6
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri6;
+ /*
+ * Total number of packets dropped on rx during PFC watchdog storm
+ * for pri 7
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_packets_dropped_pri7;
+ /*
+ * Total number of bytes dropped on rx during PFC watchdog storm
+ * for pri 0
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri0;
+ /*
+ * Total number of bytes dropped on rx during PFC watchdog storm
+ * for pri 1
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri1;
+ /*
+ * Total number of bytes dropped on rx during PFC watchdog storm
+ * for pri 2
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri2;
+ /*
+ * Total number of bytes dropped on rx during PFC watchdog storm
+ * for pri 3
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri3;
+ /*
+ * Total number of bytes dropped on rx during PFC watchdog storm
+ * for pri 4
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri4;
+ /*
+ * Total number of bytes dropped on rx during PFC watchdog storm
+ * for pri 5
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri5;
+ /*
+ * Total number of bytes dropped on rx during PFC watchdog storm
+ * for pri 6
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri6;
+ /*
+ * Total number of bytes dropped on rx during PFC watchdog storm
+ * for pri 7
+ */
+ uint64_t rx_pfc_watchdog_storms_rx_bytes_dropped_pri7;
+ /*
+ * Number of packets received during last PFC watchdog storm
+ * for pri 0
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri0;
+ /*
+ * Number of packets received during last PFC watchdog storm
+ * for pri 1
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri1;
+ /*
+ * Number of packets received during last PFC watchdog storm
+ * for pri 2
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri2;
+ /*
+ * Number of packets received during last PFC watchdog storm
+ * for pri 3
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri3;
+ /*
+ * Number of packets received during last PFC watchdog storm
+ * for pri 4
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri4;
+ /*
+ * Number of packets received during last PFC watchdog storm
+ * for pri 5
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri5;
+ /*
+ * Number of packets received during last PFC watchdog storm
+ * for pri 6
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri6;
+ /*
+ * Number of packets received during last PFC watchdog storm
+ * for pri 7
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_pri7;
+ /*
+ * Number of bytes received during last PFC watchdog storm
+ * for pri 0
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri0;
+ /*
+ * Number of bytes received during last PFC watchdog storm
+ * for pri 1
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri1;
+ /*
+ * Number of bytes received during last PFC watchdog storm
+ * for pri 2
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri2;
+ /*
+ * Number of bytes received during last PFC watchdog storm
+ * for pri 3
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri3;
+ /*
+ * Number of bytes received during last PFC watchdog storm
+ * for pri 4
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri4;
+ /*
+ * Number of bytes received during last PFC watchdog storm
+ * for pri 5
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri5;
+ /*
+ * Number of bytes received during last PFC watchdog storm
+ * for pri 6
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri6;
+ /*
+ * Number of bytes received during last PFC watchdog storm
+ * for pri 7
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_pri7;
+ /*
+ * Number of packets dropped on rx during last PFC watchdog storm
+ * for pri 0
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri0;
+ /*
+ * Number of packets dropped on rx during last PFC watchdog storm
+ * for pri 1
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri1;
+ /*
+ * Number of packets dropped on rx during last PFC watchdog storm
+ * for pri 2
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri2;
+ /*
+ * Number of packets dropped on rx during last PFC watchdog storm
+ * for pri 3
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri3;
+ /*
+ * Number of packets dropped on rx during last PFC watchdog storm
+ * for pri 4
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri4;
+ /*
+ * Number of packets dropped on rx during last PFC watchdog storm
+ * for pri 5
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri5;
+ /*
+ * Number of packets dropped on rx during last PFC watchdog storm
+ * for pri 6
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri6;
+ /*
+ * Number of packets dropped on rx during last PFC watchdog storm
+ * for pri 7
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_packets_dropped_pri7;
+ /*
+ * Total number of bytes dropped on rx during PFC watchdog storm
+ * for pri 0
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri0;
+ /*
+ * Number of bytes dropped on rx during last PFC watchdog storm
+ * for pri 1
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri1;
+ /*
+ * Number of bytes dropped on rx during last PFC watchdog storm
+ * for pri 2
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri2;
+ /*
+ * Number of bytes dropped on rx during last PFC watchdog storm
+ * for pri 3
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri3;
+ /*
+ * Number of bytes dropped on rx during last PFC watchdog storm
+ * for pri 4
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri4;
+ /*
+ * Number of bytes dropped on rx during last PFC watchdog storm
+ * for pri 5
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri5;
+ /*
+ * Number of bytes dropped on rx during last PFC watchdog storm
+ * for pri 6
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri6;
+ /*
+ * Number of bytes dropped on rx during last PFC watchdog storm
+ * for pri 7
+ */
+ uint64_t rx_pfc_watchdog_last_storm_rx_bytes_dropped_pri7;
+} __rte_packed;
+
+/************************
+ * hwrm_port_qstats_ext *
+ ************************/
+
+
+/* hwrm_port_qstats_ext_input (size:320b/40B) */
+struct hwrm_port_qstats_ext_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port that is being queried. */
+ uint16_t port_id;
+ /*
+ * The size of TX port extended
+ * statistics block in bytes.
+ */
+ uint16_t tx_stat_size;
+ /*
+ * The size of RX port extended
+ * statistics block in bytes
+ */
+ uint16_t rx_stat_size;
+ uint8_t flags;
+ /* This value is not used to avoid backward compatibility issues. */
+ #define HWRM_PORT_QSTATS_EXT_INPUT_FLAGS_UNUSED UINT32_C(0x0)
+ /*
+ * This bit is set to 1 when request is for the counter mask,
+ * representing width of each of the stats counters, rather than
+ * counters themselves.
+ */
+ #define HWRM_PORT_QSTATS_EXT_INPUT_FLAGS_COUNTER_MASK UINT32_C(0x1)
+ #define HWRM_PORT_QSTATS_EXT_INPUT_FLAGS_LAST \
+ HWRM_PORT_QSTATS_EXT_INPUT_FLAGS_COUNTER_MASK
+ uint8_t unused_0;
+ /*
+ * This is the host address where
+ * Tx port statistics will be stored
+ */
+ uint64_t tx_stat_host_addr;
+ /*
+ * This is the host address where
+ * Rx port statistics will be stored
+ */
+ uint64_t rx_stat_host_addr;
+} __rte_packed;
+
+/* hwrm_port_qstats_ext_output (size:128b/16B) */
+struct hwrm_port_qstats_ext_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* The size of TX port statistics block in bytes. */
+ uint16_t tx_stat_size;
+ /* The size of RX port statistics block in bytes. */
+ uint16_t rx_stat_size;
+ /* Total number of active cos queues available. */
+ uint16_t total_active_cos_queues;
+ uint8_t flags;
+ /*
+ * If set to 1, then this field indicates that clear
+ * roce specific counters is supported.
+ */
+ #define HWRM_PORT_QSTATS_EXT_OUTPUT_FLAGS_CLEAR_ROCE_COUNTERS_SUPPORTED \
+ UINT32_C(0x1)
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************************
+ * hwrm_port_qstats_ext_pfc_wd *
+ *******************************/
+
+
+/* hwrm_port_qstats_ext_pfc_wd_input (size:256b/32B) */
+struct hwrm_port_qstats_ext_pfc_wd_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port that is being queried. */
+ uint16_t port_id;
+ /*
+ * The size of rx_port_stats_ext_pfc_wd
+ * block in bytes
+ */
+ uint16_t pfc_wd_stat_size;
+ uint8_t unused_0[4];
+ /*
+ * This is the host address where
+ * rx_port_stats_ext_pfc_wd will be stored
+ */
+ uint64_t pfc_wd_stat_host_addr;
+} __rte_packed;
+
+/* hwrm_port_qstats_ext_pfc_wd_output (size:128b/16B) */
+struct hwrm_port_qstats_ext_pfc_wd_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * The size of rx_port_stats_ext_pfc_wd
+ * statistics block in bytes.
+ */
+ uint16_t pfc_wd_stat_size;
+ uint8_t flags;
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/*************************
+ * hwrm_port_lpbk_qstats *
+ *************************/
+
+
+/* hwrm_port_lpbk_qstats_input (size:128b/16B) */
+struct hwrm_port_lpbk_qstats_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+} __rte_packed;
+
+/* hwrm_port_lpbk_qstats_output (size:768b/96B) */
+struct hwrm_port_lpbk_qstats_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Number of transmitted unicast frames */
+ uint64_t lpbk_ucast_frames;
+ /* Number of transmitted multicast frames */
+ uint64_t lpbk_mcast_frames;
+ /* Number of transmitted broadcast frames */
+ uint64_t lpbk_bcast_frames;
+ /* Number of transmitted bytes for unicast traffic */
+ uint64_t lpbk_ucast_bytes;
+ /* Number of transmitted bytes for multicast traffic */
+ uint64_t lpbk_mcast_bytes;
+ /* Number of transmitted bytes for broadcast traffic */
+ uint64_t lpbk_bcast_bytes;
+ /* Total Tx Drops for loopback traffic reported by STATS block */
+ uint64_t tx_stat_discard;
+ /* Total Tx Error Drops for loopback traffic reported by STATS block */
+ uint64_t tx_stat_error;
+ /* Total Rx Drops for loopback traffic reported by STATS block */
+ uint64_t rx_stat_discard;
+ /* Total Rx Error Drops for loopback traffic reported by STATS block */
+ uint64_t rx_stat_error;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/************************
+ * hwrm_port_ecn_qstats *
+ ************************/
+
+
+/* hwrm_port_ecn_qstats_input (size:192b/24B) */
+struct hwrm_port_ecn_qstats_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Port ID of port that is being queried. Unused if NIC is in
+ * multi-host mode.
+ */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_port_ecn_qstats_output (size:384b/48B) */
+struct hwrm_port_ecn_qstats_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Number of packets marked in CoS queue 0. */
+ uint32_t mark_cnt_cos0;
+ /* Number of packets marked in CoS queue 1. */
+ uint32_t mark_cnt_cos1;
+ /* Number of packets marked in CoS queue 2. */
+ uint32_t mark_cnt_cos2;
+ /* Number of packets marked in CoS queue 3. */
+ uint32_t mark_cnt_cos3;
+ /* Number of packets marked in CoS queue 4. */
+ uint32_t mark_cnt_cos4;
+ /* Number of packets marked in CoS queue 5. */
+ uint32_t mark_cnt_cos5;
+ /* Number of packets marked in CoS queue 6. */
+ uint32_t mark_cnt_cos6;
+ /* Number of packets marked in CoS queue 7. */
+ uint32_t mark_cnt_cos7;
+ /*
+ * Bitmask that indicates which CoS queues have ECN marking enabled.
+ * Bit i corresponds to CoS queue i.
+ */
+ uint8_t mark_en;
+ uint8_t unused_0[6];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***********************
+ * hwrm_port_clr_stats *
+ ***********************/
+
+
+/* hwrm_port_clr_stats_input (size:192b/24B) */
+struct hwrm_port_clr_stats_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port that is being queried. */
+ uint16_t port_id;
+ uint8_t flags;
+ /*
+ * If set to 1, then this field indicates clear the following RoCE
+ * specific counters.
+ * RoCE associated TX/RX cos counters
+ * CNP associated TX/RX cos counters
+ * RoCE/CNP specific TX/RX flow counters
+ * Firmware will determine the RoCE/CNP cos queue based on qos profile.
+ * This flag is honored only when RoCE is enabled on that port.
+ */
+ #define HWRM_PORT_CLR_STATS_INPUT_FLAGS_ROCE_COUNTERS UINT32_C(0x1)
+ uint8_t unused_0[5];
+} __rte_packed;
+
+/* hwrm_port_clr_stats_output (size:128b/16B) */
+struct hwrm_port_clr_stats_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***********************
+ * hwrm_port_phy_qcaps *
+ ***********************/
+
+
+/* hwrm_port_phy_qcaps_input (size:192b/24B) */
+struct hwrm_port_phy_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port that is being queried. */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_port_phy_qcaps_output (size:192b/24B) */
+struct hwrm_port_phy_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* PHY capability flags */
+ uint8_t flags;
+ /*
+ * If set to 1, then this field indicates that the
+ * link is capable of supporting EEE.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_EEE_SUPPORTED \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, then this field indicates that the
+ * PHY is capable of supporting external loopback.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_EXTERNAL_LPBK_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, then this field indicates that the
+ * PHY is capable of supporting loopback in autoneg mode.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_AUTONEG_LPBK_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * Indicates if the configuration of shared PHY settings is supported.
+ * In cases where a physical port is shared by multiple functions
+ * (e.g. NPAR, multihost, etc), the configuration of PHY
+ * settings may not be allowed. Callers to HWRM_PORT_PHY_CFG will
+ * get an HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED error in this case.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_SHARED_PHY_CFG_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, it indicates that the port counters and extended
+ * port counters will not reset when the firmware shuts down or
+ * resets the PHY. These counters will only be reset during power
+ * cycle or by calling HWRM_PORT_CLR_STATS.
+ * If set to 0, the state of the counters is unspecified when
+ * firmware shuts down or resets the PHY.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_CUMULATIVE_COUNTERS_ON_RESET \
+ UINT32_C(0x10)
+ /*
+ * Reserved field. The HWRM shall set this field to 0.
+ * An HWRM client shall ignore this field.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_MASK \
+ UINT32_C(0xe0)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_SFT \
+ 5
+ /* Number of front panel ports for this device. */
+ uint8_t port_cnt;
+ /* Not supported or unknown */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_UNKNOWN UINT32_C(0x0)
+ /* single port device */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_1 UINT32_C(0x1)
+ /* 2-port device */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_2 UINT32_C(0x2)
+ /* 3-port device */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_3 UINT32_C(0x3)
+ /* 4-port device */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_4 UINT32_C(0x4)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_LAST \
+ HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_4
+ /*
+ * This is a bit mask to indicate what speeds are supported
+ * as forced speeds on this link.
+ * For each speed that can be forced on this link, the
+ * corresponding mask bit shall be set to '1'.
+ */
+ uint16_t supported_speeds_force_mode;
+ /* 100Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_100MBHD \
+ UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_100MB \
+ UINT32_C(0x2)
+ /* 1Gb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_1GBHD \
+ UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_1GB \
+ UINT32_C(0x8)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_2GB \
+ UINT32_C(0x10)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_2_5GB \
+ UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_10GB \
+ UINT32_C(0x40)
+ /* 20Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_20GB \
+ UINT32_C(0x80)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_25GB \
+ UINT32_C(0x100)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_40GB \
+ UINT32_C(0x200)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_50GB \
+ UINT32_C(0x400)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_100GB \
+ UINT32_C(0x800)
+ /* 10Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_10MBHD \
+ UINT32_C(0x1000)
+ /* 10Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_10MB \
+ UINT32_C(0x2000)
+ /* 200Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_200GB \
+ UINT32_C(0x4000)
+ /*
+ * This is a bit mask to indicate what speeds are supported
+ * for autonegotiation on this link.
+ * For each speed that can be autonegotiated on this link, the
+ * corresponding mask bit shall be set to '1'.
+ */
+ uint16_t supported_speeds_auto_mode;
+ /* 100Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_100MBHD \
+ UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_100MB \
+ UINT32_C(0x2)
+ /* 1Gb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_1GBHD \
+ UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_1GB \
+ UINT32_C(0x8)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_2GB \
+ UINT32_C(0x10)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_2_5GB \
+ UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_10GB \
+ UINT32_C(0x40)
+ /* 20Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_20GB \
+ UINT32_C(0x80)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_25GB \
+ UINT32_C(0x100)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_40GB \
+ UINT32_C(0x200)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_50GB \
+ UINT32_C(0x400)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_100GB \
+ UINT32_C(0x800)
+ /* 10Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_10MBHD \
+ UINT32_C(0x1000)
+ /* 10Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_10MB \
+ UINT32_C(0x2000)
+ /* 200Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_200GB \
+ UINT32_C(0x4000)
+ /*
+ * This is a bit mask to indicate what speeds are supported
+ * for EEE on this link.
+ * For each speed that can be autonegotiated when EEE is enabled
+ * on this link, the corresponding mask bit shall be set to '1'.
+ * This field is only valid when the eee_suppotred is set to '1'.
+ */
+ uint16_t supported_speeds_eee_mode;
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD1 \
+ UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_100MB \
+ UINT32_C(0x2)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD2 \
+ UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_1GB \
+ UINT32_C(0x8)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD3 \
+ UINT32_C(0x10)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD4 \
+ UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_10GB \
+ UINT32_C(0x40)
+ uint32_t tx_lpi_timer_low;
+ /*
+ * The lowest value of TX LPI timer that can be set on this link
+ * when EEE is enabled. This value is in microseconds.
+ * This field is valid only when_eee_supported is set to '1'.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_LOW_MASK \
+ UINT32_C(0xffffff)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_LOW_SFT 0
+ /*
+ * Reserved field. The HWRM shall set this field to 0.
+ * An HWRM client shall ignore this field.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_RSVD2_MASK \
+ UINT32_C(0xff000000)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_RSVD2_SFT 24
+ uint32_t valid_tx_lpi_timer_high;
+ /*
+ * The highest value of TX LPI timer that can be set on this link
+ * when EEE is enabled. This value is in microseconds.
+ * This field is valid only when_eee_supported is set to '1'.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_HIGH_MASK \
+ UINT32_C(0xffffff)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_HIGH_SFT 0
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_VALID_MASK \
+ UINT32_C(0xff000000)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_VALID_SFT 24
+} __rte_packed;
+
+/****************************
+ * hwrm_port_phy_mdio_write *
+ ****************************/
+
+
+/* hwrm_port_phy_mdio_write_input (size:320b/40B) */
+struct hwrm_port_phy_mdio_write_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Reserved for future use. */
+ uint32_t unused_0[2];
+ /* Port ID of port. */
+ uint16_t port_id;
+ /* If phy_address is 0xFF, port_id will be used to derive phy_addr. */
+ uint8_t phy_addr;
+ /* 8-bit device address. */
+ uint8_t dev_addr;
+ /* 16-bit register address. */
+ uint16_t reg_addr;
+ /* 16-bit register data. */
+ uint16_t reg_data;
+ /*
+ * When this bit is set to 1 a Clause 45 mdio access is done.
+ * when this bit is set to 0 a Clause 22 mdio access is done.
+ */
+ uint8_t cl45_mdio;
+ /* */
+ uint8_t unused_1[7];
+} __rte_packed;
+
+/* hwrm_port_phy_mdio_write_output (size:128b/16B) */
+struct hwrm_port_phy_mdio_write_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***************************
+ * hwrm_port_phy_mdio_read *
+ ***************************/
+
+
+/* hwrm_port_phy_mdio_read_input (size:256b/32B) */
+struct hwrm_port_phy_mdio_read_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Reserved for future use. */
+ uint32_t unused_0[2];
+ /* Port ID of port. */
+ uint16_t port_id;
+ /* If phy_address is 0xFF, port_id will be used to derive phy_addr. */
+ uint8_t phy_addr;
+ /* 8-bit device address. */
+ uint8_t dev_addr;
+ /* 16-bit register address. */
+ uint16_t reg_addr;
+ /*
+ * When this bit is set to 1 a Clause 45 mdio access is done.
+ * when this bit is set to 0 a Clause 22 mdio access is done.
+ */
+ uint8_t cl45_mdio;
+ /* */
+ uint8_t unused_1;
+} __rte_packed;
+
+/* hwrm_port_phy_mdio_read_output (size:128b/16B) */
+struct hwrm_port_phy_mdio_read_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* 16-bit register data. */
+ uint16_t reg_data;
+ uint8_t unused_0[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*********************
+ * hwrm_port_led_cfg *
+ *********************/
+
+
+/* hwrm_port_led_cfg_input (size:512b/64B) */
+struct hwrm_port_led_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the led0_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_ID \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the led0_state field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_STATE \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the led0_color field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_COLOR \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the led0_blink_on field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_ON \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the led0_blink_off field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_OFF \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the led0_group_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_GROUP_ID \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the led1_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_ID \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the led1_state field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_STATE \
+ UINT32_C(0x80)
+ /*
+ * This bit must be '1' for the led1_color field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_COLOR \
+ UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the led1_blink_on field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_ON \
+ UINT32_C(0x200)
+ /*
+ * This bit must be '1' for the led1_blink_off field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_OFF \
+ UINT32_C(0x400)
+ /*
+ * This bit must be '1' for the led1_group_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_GROUP_ID \
+ UINT32_C(0x800)
+ /*
+ * This bit must be '1' for the led2_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_ID \
+ UINT32_C(0x1000)
+ /*
+ * This bit must be '1' for the led2_state field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_STATE \
+ UINT32_C(0x2000)
+ /*
+ * This bit must be '1' for the led2_color field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_COLOR \
+ UINT32_C(0x4000)
+ /*
+ * This bit must be '1' for the led2_blink_on field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_ON \
+ UINT32_C(0x8000)
+ /*
+ * This bit must be '1' for the led2_blink_off field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_OFF \
+ UINT32_C(0x10000)
+ /*
+ * This bit must be '1' for the led2_group_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_GROUP_ID \
+ UINT32_C(0x20000)
+ /*
+ * This bit must be '1' for the led3_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_ID \
+ UINT32_C(0x40000)
+ /*
+ * This bit must be '1' for the led3_state field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_STATE \
+ UINT32_C(0x80000)
+ /*
+ * This bit must be '1' for the led3_color field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_COLOR \
+ UINT32_C(0x100000)
+ /*
+ * This bit must be '1' for the led3_blink_on field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_ON \
+ UINT32_C(0x200000)
+ /*
+ * This bit must be '1' for the led3_blink_off field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_OFF \
+ UINT32_C(0x400000)
+ /*
+ * This bit must be '1' for the led3_group_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_GROUP_ID \
+ UINT32_C(0x800000)
+ /* Port ID of port whose LEDs are configured. */
+ uint16_t port_id;
+ /*
+ * The number of LEDs that are being configured.
+ * Up to 4 LEDs can be configured with this command.
+ */
+ uint8_t num_leds;
+ /* Reserved field. */
+ uint8_t rsvd;
+ /* An identifier for the LED #0. */
+ uint8_t led0_id;
+ /* The requested state of the LED #0. */
+ uint8_t led0_state;
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINKALT UINT32_C(0x4)
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_LAST \
+ HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINKALT
+ /* The requested color of LED #0. */
+ uint8_t led0_color;
+ /* Default */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREENAMBER UINT32_C(0x3)
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_LAST \
+ HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREENAMBER
+ uint8_t unused_0;
+ /*
+ * If the LED #0 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED on between cycles.
+ */
+ uint16_t led0_blink_on;
+ /*
+ * If the LED #0 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED off between cycles.
+ */
+ uint16_t led0_blink_off;
+ /*
+ * An identifier for the group of LEDs that LED #0 belongs
+ * to.
+ * If set to 0, then the LED #0 shall not be grouped and
+ * shall be treated as an individual resource.
+ * For all other non-zero values of this field, LED #0 shall
+ * be grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led0_group_id;
+ /* Reserved field. */
+ uint8_t rsvd0;
+ /* An identifier for the LED #1. */
+ uint8_t led1_id;
+ /* The requested state of the LED #1. */
+ uint8_t led1_state;
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINKALT UINT32_C(0x4)
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_LAST \
+ HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINKALT
+ /* The requested color of LED #1. */
+ uint8_t led1_color;
+ /* Default */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREENAMBER UINT32_C(0x3)
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_LAST \
+ HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREENAMBER
+ uint8_t unused_1;
+ /*
+ * If the LED #1 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED on between cycles.
+ */
+ uint16_t led1_blink_on;
+ /*
+ * If the LED #1 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED off between cycles.
+ */
+ uint16_t led1_blink_off;
+ /*
+ * An identifier for the group of LEDs that LED #1 belongs
+ * to.
+ * If set to 0, then the LED #1 shall not be grouped and
+ * shall be treated as an individual resource.
+ * For all other non-zero values of this field, LED #1 shall
+ * be grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led1_group_id;
+ /* Reserved field. */
+ uint8_t rsvd1;
+ /* An identifier for the LED #2. */
+ uint8_t led2_id;
+ /* The requested state of the LED #2. */
+ uint8_t led2_state;
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINKALT UINT32_C(0x4)
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_LAST \
+ HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINKALT
+ /* The requested color of LED #2. */
+ uint8_t led2_color;
+ /* Default */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREENAMBER UINT32_C(0x3)
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_LAST \
+ HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREENAMBER
+ uint8_t unused_2;
+ /*
+ * If the LED #2 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED on between cycles.
+ */
+ uint16_t led2_blink_on;
+ /*
+ * If the LED #2 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED off between cycles.
+ */
+ uint16_t led2_blink_off;
+ /*
+ * An identifier for the group of LEDs that LED #2 belongs
+ * to.
+ * If set to 0, then the LED #2 shall not be grouped and
+ * shall be treated as an individual resource.
+ * For all other non-zero values of this field, LED #2 shall
+ * be grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led2_group_id;
+ /* Reserved field. */
+ uint8_t rsvd2;
+ /* An identifier for the LED #3. */
+ uint8_t led3_id;
+ /* The requested state of the LED #3. */
+ uint8_t led3_state;
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINKALT UINT32_C(0x4)
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_LAST \
+ HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINKALT
+ /* The requested color of LED #3. */
+ uint8_t led3_color;
+ /* Default */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREENAMBER UINT32_C(0x3)
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_LAST \
+ HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREENAMBER
+ uint8_t unused_3;
+ /*
+ * If the LED #3 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED on between cycles.
+ */
+ uint16_t led3_blink_on;
+ /*
+ * If the LED #3 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED off between cycles.
+ */
+ uint16_t led3_blink_off;
+ /*
+ * An identifier for the group of LEDs that LED #3 belongs
+ * to.
+ * If set to 0, then the LED #3 shall not be grouped and
+ * shall be treated as an individual resource.
+ * For all other non-zero values of this field, LED #3 shall
+ * be grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led3_group_id;
+ /* Reserved field. */
+ uint8_t rsvd3;
+} __rte_packed;
+
+/* hwrm_port_led_cfg_output (size:128b/16B) */
+struct hwrm_port_led_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************
+ * hwrm_port_led_qcfg *
+ **********************/
+
+
+/* hwrm_port_led_qcfg_input (size:192b/24B) */
+struct hwrm_port_led_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port whose LED configuration is being queried. */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_port_led_qcfg_output (size:448b/56B) */
+struct hwrm_port_led_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * The number of LEDs that are configured on this port.
+ * Up to 4 LEDs can be returned in the response.
+ */
+ uint8_t num_leds;
+ /* An identifier for the LED #0. */
+ uint8_t led0_id;
+ /* The type of LED #0. */
+ uint8_t led0_type;
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_INVALID UINT32_C(0xff)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_INVALID
+ /* The current state of the LED #0. */
+ uint8_t led0_state;
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINKALT UINT32_C(0x4)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINKALT
+ /* The color of LED #0. */
+ uint8_t led0_color;
+ /* Default */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREENAMBER UINT32_C(0x3)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREENAMBER
+ uint8_t unused_0;
+ /*
+ * If the LED #0 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED on between cycles.
+ */
+ uint16_t led0_blink_on;
+ /*
+ * If the LED #0 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED off between cycles.
+ */
+ uint16_t led0_blink_off;
+ /*
+ * An identifier for the group of LEDs that LED #0 belongs
+ * to.
+ * If set to 0, then the LED #0 is not grouped.
+ * For all other non-zero values of this field, LED #0 is
+ * grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led0_group_id;
+ /* An identifier for the LED #1. */
+ uint8_t led1_id;
+ /* The type of LED #1. */
+ uint8_t led1_type;
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_INVALID UINT32_C(0xff)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_INVALID
+ /* The current state of the LED #1. */
+ uint8_t led1_state;
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINKALT UINT32_C(0x4)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINKALT
+ /* The color of LED #1. */
+ uint8_t led1_color;
+ /* Default */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREENAMBER UINT32_C(0x3)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREENAMBER
+ uint8_t unused_1;
+ /*
+ * If the LED #1 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED on between cycles.
+ */
+ uint16_t led1_blink_on;
+ /*
+ * If the LED #1 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED off between cycles.
+ */
+ uint16_t led1_blink_off;
+ /*
+ * An identifier for the group of LEDs that LED #1 belongs
+ * to.
+ * If set to 0, then the LED #1 is not grouped.
+ * For all other non-zero values of this field, LED #1 is
+ * grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led1_group_id;
+ /* An identifier for the LED #2. */
+ uint8_t led2_id;
+ /* The type of LED #2. */
+ uint8_t led2_type;
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_INVALID UINT32_C(0xff)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_INVALID
+ /* The current state of the LED #2. */
+ uint8_t led2_state;
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINKALT UINT32_C(0x4)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINKALT
+ /* The color of LED #2. */
+ uint8_t led2_color;
+ /* Default */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREENAMBER UINT32_C(0x3)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREENAMBER
+ uint8_t unused_2;
+ /*
+ * If the LED #2 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED on between cycles.
+ */
+ uint16_t led2_blink_on;
+ /*
+ * If the LED #2 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED off between cycles.
+ */
+ uint16_t led2_blink_off;
+ /*
+ * An identifier for the group of LEDs that LED #2 belongs
+ * to.
+ * If set to 0, then the LED #2 is not grouped.
+ * For all other non-zero values of this field, LED #2 is
+ * grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led2_group_id;
+ /* An identifier for the LED #3. */
+ uint8_t led3_id;
+ /* The type of LED #3. */
+ uint8_t led3_type;
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_INVALID UINT32_C(0xff)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_INVALID
+ /* The current state of the LED #3. */
+ uint8_t led3_state;
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINKALT UINT32_C(0x4)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINKALT
+ /* The color of LED #3. */
+ uint8_t led3_color;
+ /* Default */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREENAMBER UINT32_C(0x3)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREENAMBER
+ uint8_t unused_3;
+ /*
+ * If the LED #3 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED on between cycles.
+ */
+ uint16_t led3_blink_on;
+ /*
+ * If the LED #3 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED off between cycles.
+ */
+ uint16_t led3_blink_off;
+ /*
+ * An identifier for the group of LEDs that LED #3 belongs
+ * to.
+ * If set to 0, then the LED #3 is not grouped.
+ * For all other non-zero values of this field, LED #3 is
+ * grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led3_group_id;
+ uint8_t unused_4[6];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***********************
+ * hwrm_port_led_qcaps *
+ ***********************/
+
+
+/* hwrm_port_led_qcaps_input (size:192b/24B) */
+struct hwrm_port_led_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port whose LED configuration is being queried. */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_port_led_qcaps_output (size:384b/48B) */
+struct hwrm_port_led_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * The number of LEDs that are configured on this port.
+ * Up to 4 LEDs can be returned in the response.
+ */
+ uint8_t num_leds;
+ /* Reserved for future use. */
+ uint8_t unused[3];
+ /* An identifier for the LED #0. */
+ uint8_t led0_id;
+ /* The type of LED #0. */
+ uint8_t led0_type;
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_INVALID UINT32_C(0xff)
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_LAST \
+ HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_INVALID
+ /*
+ * An identifier for the group of LEDs that LED #0 belongs
+ * to.
+ * If set to 0, then the LED #0 cannot be grouped.
+ * For all other non-zero values of this field, LED #0 is
+ * grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led0_group_id;
+ uint8_t unused_0;
+ /* The states supported by LED #0. */
+ uint16_t led0_state_caps;
+ /*
+ * If set to 1, this LED is enabled.
+ * If set to 0, this LED is disabled.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ENABLED \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, off state is supported on this LED.
+ * If set to 0, off state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_OFF_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, on state is supported on this LED.
+ * If set to 0, on state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ON_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, blink state is supported on this LED.
+ * If set to 0, blink state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, blink_alt state is supported on this LED.
+ * If set to 0, blink_alt state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_ALT_SUPPORTED \
+ UINT32_C(0x10)
+ /* The colors supported by LED #0. */
+ uint16_t led0_color_caps;
+ /* reserved. */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_RSVD \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, Amber color is supported on this LED.
+ * If set to 0, Amber color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_AMBER_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, Green color is supported on this LED.
+ * If set to 0, Green color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_GREEN_SUPPORTED \
+ UINT32_C(0x4)
+ /* An identifier for the LED #1. */
+ uint8_t led1_id;
+ /* The type of LED #1. */
+ uint8_t led1_type;
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_INVALID UINT32_C(0xff)
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_LAST \
+ HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_INVALID
+ /*
+ * An identifier for the group of LEDs that LED #1 belongs
+ * to.
+ * If set to 0, then the LED #0 cannot be grouped.
+ * For all other non-zero values of this field, LED #0 is
+ * grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led1_group_id;
+ uint8_t unused_1;
+ /* The states supported by LED #1. */
+ uint16_t led1_state_caps;
+ /*
+ * If set to 1, this LED is enabled.
+ * If set to 0, this LED is disabled.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ENABLED \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, off state is supported on this LED.
+ * If set to 0, off state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_OFF_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, on state is supported on this LED.
+ * If set to 0, on state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ON_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, blink state is supported on this LED.
+ * If set to 0, blink state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, blink_alt state is supported on this LED.
+ * If set to 0, blink_alt state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_ALT_SUPPORTED \
+ UINT32_C(0x10)
+ /* The colors supported by LED #1. */
+ uint16_t led1_color_caps;
+ /* reserved. */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_RSVD \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, Amber color is supported on this LED.
+ * If set to 0, Amber color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_AMBER_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, Green color is supported on this LED.
+ * If set to 0, Green color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_GREEN_SUPPORTED \
+ UINT32_C(0x4)
+ /* An identifier for the LED #2. */
+ uint8_t led2_id;
+ /* The type of LED #2. */
+ uint8_t led2_type;
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_INVALID UINT32_C(0xff)
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_LAST \
+ HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_INVALID
+ /*
+ * An identifier for the group of LEDs that LED #0 belongs
+ * to.
+ * If set to 0, then the LED #0 cannot be grouped.
+ * For all other non-zero values of this field, LED #0 is
+ * grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led2_group_id;
+ uint8_t unused_2;
+ /* The states supported by LED #2. */
+ uint16_t led2_state_caps;
+ /*
+ * If set to 1, this LED is enabled.
+ * If set to 0, this LED is disabled.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ENABLED \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, off state is supported on this LED.
+ * If set to 0, off state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_OFF_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, on state is supported on this LED.
+ * If set to 0, on state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ON_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, blink state is supported on this LED.
+ * If set to 0, blink state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, blink_alt state is supported on this LED.
+ * If set to 0, blink_alt state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_ALT_SUPPORTED \
+ UINT32_C(0x10)
+ /* The colors supported by LED #2. */
+ uint16_t led2_color_caps;
+ /* reserved. */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_RSVD \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, Amber color is supported on this LED.
+ * If set to 0, Amber color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_AMBER_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, Green color is supported on this LED.
+ * If set to 0, Green color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_GREEN_SUPPORTED \
+ UINT32_C(0x4)
+ /* An identifier for the LED #3. */
+ uint8_t led3_id;
+ /* The type of LED #3. */
+ uint8_t led3_type;
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_INVALID UINT32_C(0xff)
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_LAST \
+ HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_INVALID
+ /*
+ * An identifier for the group of LEDs that LED #3 belongs
+ * to.
+ * If set to 0, then the LED #0 cannot be grouped.
+ * For all other non-zero values of this field, LED #0 is
+ * grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led3_group_id;
+ uint8_t unused_3;
+ /* The states supported by LED #3. */
+ uint16_t led3_state_caps;
+ /*
+ * If set to 1, this LED is enabled.
+ * If set to 0, this LED is disabled.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ENABLED \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, off state is supported on this LED.
+ * If set to 0, off state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_OFF_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, on state is supported on this LED.
+ * If set to 0, on state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ON_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, blink state is supported on this LED.
+ * If set to 0, blink state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, blink_alt state is supported on this LED.
+ * If set to 0, blink_alt state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_ALT_SUPPORTED \
+ UINT32_C(0x10)
+ /* The colors supported by LED #3. */
+ uint16_t led3_color_caps;
+ /* reserved. */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_RSVD \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, Amber color is supported on this LED.
+ * If set to 0, Amber color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_AMBER_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, Green color is supported on this LED.
+ * If set to 0, Green color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_GREEN_SUPPORTED \
+ UINT32_C(0x4)
+ uint8_t unused_4[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***********************
+ * hwrm_port_prbs_test *
+ ***********************/
+
+
+/* hwrm_port_prbs_test_input (size:384b/48B) */
+struct hwrm_port_prbs_test_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Host address data is to DMA'd to. */
+ uint64_t resp_data_addr;
+ /*
+ * Size of the buffer pointed to by resp_data_addr. The firmware may
+ * use this entire buffer or less than the entire buffer, but never more.
+ */
+ uint16_t data_len;
+ uint16_t unused_0;
+ uint32_t unused_1;
+ /* Port ID of port where PRBS test to be run. */
+ uint16_t port_id;
+ /* Polynomial selection for PRBS test. */
+ uint16_t poly;
+ /* PRBS7 */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS7 UINT32_C(0x0)
+ /* PRBS9 */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS9 UINT32_C(0x1)
+ /* PRBS11 */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS11 UINT32_C(0x2)
+ /* PRBS15 */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS15 UINT32_C(0x3)
+ /* PRBS23 */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS23 UINT32_C(0x4)
+ /* PRBS31 */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS31 UINT32_C(0x5)
+ /* PRBS58 */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS58 UINT32_C(0x6)
+ /* Invalid */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_INVALID UINT32_C(0xff)
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_LAST \
+ HWRM_PORT_PRBS_TEST_INPUT_POLY_INVALID
+ /*
+ * Configuration bits for PRBS test.
+ * Use enable bit to start/stop test.
+ * Use tx/rx lane map bits to run test on specific lanes,
+ * if set to 0 test will be run on all lanes.
+ */
+ uint16_t prbs_config;
+ /*
+ * Set 0 to stop test currently in progress
+ * Set 1 to start test with configuration provided.
+ */
+ #define HWRM_PORT_PRBS_TEST_INPUT_PRBS_CONFIG_START_STOP \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, tx_lane_map bitmap should have lane bits set.
+ * If set to 0, test will be run on all lanes for this port.
+ */
+ #define HWRM_PORT_PRBS_TEST_INPUT_PRBS_CONFIG_TX_LANE_MAP_VALID \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, rx_lane_map bitmap should have lane bits set.
+ * If set to 0, test will be run on all lanes for this port.
+ */
+ #define HWRM_PORT_PRBS_TEST_INPUT_PRBS_CONFIG_RX_LANE_MAP_VALID \
+ UINT32_C(0x4)
+ /* Duration in seconds to run the PRBS test. */
+ uint16_t timeout;
+ /*
+ * If tx_lane_map_valid is set to 1, this field is a bitmap
+ * of tx lanes to run PRBS test. bit0 = lane0,
+ * bit1 = lane1 ..bit31 = lane31
+ */
+ uint32_t tx_lane_map;
+ /*
+ * If rx_lane_map_valid is set to 1, this field is a bitmap
+ * of rx lanes to run PRBS test. bit0 = lane0,
+ * bit1 = lane1 ..bit31 = lane31
+ */
+ uint32_t rx_lane_map;
+} __rte_packed;
+
+/* hwrm_port_prbs_test_output (size:128b/16B) */
+struct hwrm_port_prbs_test_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Total length of stored data. */
+ uint16_t total_data_len;
+ uint16_t unused_0;
+ uint8_t unused_1[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************
+ * hwrm_port_dsc_dump *
+ **********************/
+
+
+/* hwrm_port_dsc_dump_input (size:320b/40B) */
+struct hwrm_port_dsc_dump_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Host address where response diagnostic data is returned. */
+ uint64_t resp_data_addr;
+ /*
+ * Size of the buffer pointed to by resp_data_addr. The firmware
+ * may use this entire buffer or less than the entire buffer, but
+ * never more.
+ */
+ uint16_t data_len;
+ uint16_t unused_0;
+ uint32_t unused_1;
+ /* Port ID of port where dsc dump to be collected. */
+ uint16_t port_id;
+ /* Diag level specified by the user */
+ uint16_t diag_level;
+ /* SRDS_DIAG_LANE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_LANE \
+ UINT32_C(0x0)
+ /* SRDS_DIAG_CORE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_CORE \
+ UINT32_C(0x1)
+ /* SRDS_DIAG_EVENT */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_EVENT \
+ UINT32_C(0x2)
+ /* SRDS_DIAG_EYE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_EYE \
+ UINT32_C(0x3)
+ /* SRDS_DIAG_REG_CORE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_REG_CORE \
+ UINT32_C(0x4)
+ /* SRDS_DIAG_REG_LANE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_REG_LANE \
+ UINT32_C(0x5)
+ /* SRDS_DIAG_UC_CORE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_UC_CORE \
+ UINT32_C(0x6)
+ /* SRDS_DIAG_UC_LANE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_UC_LANE \
+ UINT32_C(0x7)
+ /* SRDS_DIAG_LANE_DEBUG */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_LANE_DEBUG \
+ UINT32_C(0x8)
+ /* SRDS_DIAG_BER_VERT */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_BER_VERT \
+ UINT32_C(0x9)
+ /* SRDS_DIAG_BER_HORZ */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_BER_HORZ \
+ UINT32_C(0xa)
+ /* SRDS_DIAG_EVENT_SAFE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_EVENT_SAFE \
+ UINT32_C(0xb)
+ /* SRDS_DIAG_TIMESTAMP */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_TIMESTAMP \
+ UINT32_C(0xc)
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_LAST \
+ HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_TIMESTAMP
+ /*
+ * This field is a lane number
+ * on which to collect the dsc dump
+ */
+ uint16_t lane_number;
+ /*
+ * Configuration bits.
+ * Use enable bit to start dsc dump or retrieve dump
+ */
+ uint16_t dsc_dump_config;
+ /*
+ * Set 0 to retrieve the dsc dump
+ * Set 1 to start the dsc dump
+ */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DSC_DUMP_CONFIG_START_RETRIEVE \
+ UINT32_C(0x1)
+} __rte_packed;
+
+/* hwrm_port_dsc_dump_output (size:128b/16B) */
+struct hwrm_port_dsc_dump_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Total length of stored data. */
+ uint16_t total_data_len;
+ uint16_t unused_0;
+ uint8_t unused_1[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************************
+ * hwrm_port_sfp_sideband_cfg *
+ ******************************/
+
+
+/* hwrm_port_sfp_sideband_cfg_input (size:256b/32B) */
+struct hwrm_port_sfp_sideband_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port that is to be queried. */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+ /*
+ * This bitfield is used to specify which bits from the 'flags'
+ * fields are being configured by the caller.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for rs0 to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_RS0 \
+ UINT32_C(0x1)
+ /* This bit must be '1' for rs1 to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_RS1 \
+ UINT32_C(0x2)
+ /* This bit must be '1' for tx_disable to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_TX_DIS \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for mod_sel to be configured.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_MOD_SEL \
+ UINT32_C(0x8)
+ /* This bit must be '1' for reset_l to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_RESET_L \
+ UINT32_C(0x10)
+ /* This bit must be '1' for lp_mode to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_LP_MODE \
+ UINT32_C(0x20)
+ /* This bit must be '1' for pwr_disable to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_PWR_DIS \
+ UINT32_C(0x40)
+ /*
+ * Only bits that have corresponding bits in the 'enables'
+ * bitfield are processed by the firmware, all other bits
+ * of 'flags' are ignored.
+ */
+ uint32_t flags;
+ /*
+ * This bit along with rs1 configures the current speed of the dual
+ * rate module. If these pins are GNDed then the speed can be changed
+ * by driectly writing to EEPROM.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_RS0 \
+ UINT32_C(0x1)
+ /*
+ * This bit along with rs0 configures the current speed of the dual
+ * rate module. If these pins are GNDed then the speed can be changed
+ * by driectly writing to EEPROM.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_RS1 \
+ UINT32_C(0x2)
+ /*
+ * When this bit is set to '1', tx_disable is set.
+ * On a 1G BASE-T module, if this bit is set,
+ * module PHY registers will not be accessible.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_TX_DIS \
+ UINT32_C(0x4)
+ /*
+ * When this bit is set to '1', this module is selected.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_MOD_SEL \
+ UINT32_C(0x8)
+ /*
+ * If reset_l is set to 0, Module will be taken out of reset
+ * and other signals will be set to their requested state once
+ * the module is out of reset.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_RESET_L \
+ UINT32_C(0x10)
+ /*
+ * When this bit is set to '1', the module will be configured
+ * in low power mode.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_LP_MODE \
+ UINT32_C(0x20)
+ /* When this bit is set to '1', the module will be powered down. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_PWR_DIS \
+ UINT32_C(0x40)
+} __rte_packed;
+
+/* hwrm_port_sfp_sideband_cfg_output (size:128b/16B) */
+struct hwrm_port_sfp_sideband_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written. When
+ * writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************************
+ * hwrm_port_sfp_sideband_qcfg *
+ *******************************/
+
+
+/* hwrm_port_sfp_sideband_qcfg_input (size:192b/24B) */
+struct hwrm_port_sfp_sideband_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port that is to be queried. */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_port_sfp_sideband_qcfg_output (size:192b/24B) */
+struct hwrm_port_sfp_sideband_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * Bitmask indicating which sideband signals are valid.
+ * This is based on the board and nvm cfg that is present on the board.
+ */
+ uint32_t supported_mask;
+ uint32_t sideband_signals;
+ /* When this bit is set to '1', the Module is absent. */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_MOD_ABS \
+ UINT32_C(0x1)
+ /*
+ * When this bit is set to '1', there is no valid signal on RX.
+ * This signal is a filtered version of Signal Detect.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RX_LOS \
+ UINT32_C(0x2)
+ /*
+ * This bit along with rs1 indiactes the current speed of the dual
+ * rate module.If these pins are grounded then the speed can be
+ * changed by driectky writing to EEPROM.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RS0 \
+ UINT32_C(0x4)
+ /*
+ * This bit along with rs0 indiactes the current speed of the dual
+ * rate module.If these pins are grounded then the speed can be
+ * changed by driectky writing to EEPROM.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RS1 \
+ UINT32_C(0x8)
+ /*
+ * When this bit is set to '1', tx_disable is set.
+ * On a 1G BASE-T module, if this bit is set, module PHY
+ * registers will not be accessible.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_TX_DIS \
+ UINT32_C(0x10)
+ /* When this bit is set to '1', tx_fault is set. */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_TX_FAULT \
+ UINT32_C(0x20)
+ /*
+ * When this bit is set to '1', module is selected.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_MOD_SEL \
+ UINT32_C(0x40)
+ /*
+ * When this bit is set to '0', the module is held in reset.
+ * if reset_l is set to 1,first module is taken out of reset
+ * and other signals will be set to their requested state.
+ * Valid only on QSFP modules.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RESET_L \
+ UINT32_C(0x80)
+ /*
+ * When this bit is set to '1', the module is in low power mode.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_LP_MODE \
+ UINT32_C(0x100)
+ /* When this bit is set to '1', module is in power down state. */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_PWR_DIS \
+ UINT32_C(0x200)
+ uint8_t unused[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written. When
+ * writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************************
+ * hwrm_port_phy_mdio_bus_acquire *
+ **********************************/
+
+
+/* hwrm_port_phy_mdio_bus_acquire_input (size:192b/24B) */
+struct hwrm_port_phy_mdio_bus_acquire_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of the port. */
+ uint16_t port_id;
+ /*
+ * client_id of the client requesting BUS access.
+ * Any value from 0x10 to 0xFFFF can be used.
+ * Client should make sure that the returned client_id
+ * in response matches the client_id in request.
+ * 0-0xF are reserved for internal use.
+ */
+ uint16_t client_id;
+ /*
+ * Timeout in milli seconds, MDIO BUS will be released automatically
+ * after this time, if another mdio acquire command is not received
+ * within the timeout window from the same client.
+ * A 0xFFFF will hold the bus until this bus is released.
+ */
+ uint16_t mdio_bus_timeout;
+ uint8_t unused_0[2];
+} __rte_packed;
+
+/* hwrm_port_phy_mdio_bus_acquire_output (size:128b/16B) */
+struct hwrm_port_phy_mdio_bus_acquire_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint16_t unused_0;
+ /*
+ * client_id of the module holding the BUS.
+ * 0-0xF are reserved for internal use.
+ */
+ uint16_t client_id;
+ uint8_t unused_1[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************************
+ * hwrm_port_phy_mdio_bus_release *
+ **********************************/
+
+
+/* hwrm_port_phy_mdio_bus_release_input (size:192b/24B) */
+struct hwrm_port_phy_mdio_bus_release_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of the port. */
+ uint16_t port_id;
+ /*
+ * client_id of the client requesting BUS release.
+ * A client should not release any other clients BUS.
+ */
+ uint16_t client_id;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_port_phy_mdio_bus_release_output (size:128b/16B) */
+struct hwrm_port_phy_mdio_bus_release_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint16_t unused_0;
+ /* The BUS is released if client_id matches the client_id in request. */
+ uint16_t clients_id;
+ uint8_t unused_1[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***********************
+ * hwrm_queue_qportcfg *
+ ***********************/
+
+
+/* hwrm_queue_qportcfg_input (size:192b/24B) */
+struct hwrm_queue_qportcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_LAST \
+ HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX
+ /*
+ * Port ID of port for which the queue configuration is being
+ * queried. This field is only required when sent by IPC.
+ */
+ uint16_t port_id;
+ /*
+ * Drivers will set this capability when it can use
+ * queue_idx_service_profile to map the queues to application.
+ */
+ uint8_t drv_qmap_cap;
+ /* disabled */
+ #define HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_DISABLED UINT32_C(0x0)
+ /* enabled */
+ #define HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_ENABLED UINT32_C(0x1)
+ #define HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_LAST \
+ HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_ENABLED
+ uint8_t unused_0;
+} __rte_packed;
+
+/* hwrm_queue_qportcfg_output (size:1344b/168B) */
+struct hwrm_queue_qportcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * The maximum number of queues that can be configured on this
+ * port.
+ * Valid values range from 1 through 8.
+ */
+ uint8_t max_configurable_queues;
+ /*
+ * The maximum number of lossless queues that can be configured
+ * on this port.
+ * Valid values range from 0 through 8.
+ */
+ uint8_t max_configurable_lossless_queues;
+ /*
+ * Bitmask indicating which queues can be configured by the
+ * hwrm_queue_cfg command.
+ *
+ * Each bit represents a specific queue where bit 0 represents
+ * queue 0 and bit 7 represents queue 7.
+ * # A value of 0 indicates that the queue is not configurable
+ * by the hwrm_queue_cfg command.
+ * # A value of 1 indicates that the queue is configurable.
+ * # A hwrm_queue_cfg command shall return error when trying to
+ * configure a queue not configurable.
+ */
+ uint8_t queue_cfg_allowed;
+ /* Information about queue configuration. */
+ uint8_t queue_cfg_info;
+ /*
+ * If this flag is set to '1', then the queues are
+ * configured asymmetrically on TX and RX sides.
+ * If this flag is set to '0', then the queues are
+ * configured symmetrically on TX and RX sides. For
+ * symmetric configuration, the queue configuration
+ * including queue ids and service profiles on the
+ * TX side is the same as the corresponding queue
+ * configuration on the RX side.
+ */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG \
+ UINT32_C(0x1)
+ /*
+ * Bitmask indicating which queues can be configured by the
+ * hwrm_queue_pfcenable_cfg command.
+ *
+ * Each bit represents a specific priority where bit 0 represents
+ * priority 0 and bit 7 represents priority 7.
+ * # A value of 0 indicates that the priority is not configurable by
+ * the hwrm_queue_pfcenable_cfg command.
+ * # A value of 1 indicates that the priority is configurable.
+ * # A hwrm_queue_pfcenable_cfg command shall return error when
+ * trying to configure a priority that is not configurable.
+ */
+ uint8_t queue_pfcenable_cfg_allowed;
+ /*
+ * Bitmask indicating which queues can be configured by the
+ * hwrm_queue_pri2cos_cfg command.
+ *
+ * Each bit represents a specific queue where bit 0 represents
+ * queue 0 and bit 7 represents queue 7.
+ * # A value of 0 indicates that the queue is not configurable
+ * by the hwrm_queue_pri2cos_cfg command.
+ * # A value of 1 indicates that the queue is configurable.
+ * # A hwrm_queue_pri2cos_cfg command shall return error when
+ * trying to configure a queue that is not configurable.
+ */
+ uint8_t queue_pri2cos_cfg_allowed;
+ /*
+ * Bitmask indicating which queues can be configured by the
+ * hwrm_queue_pri2cos_cfg command.
+ *
+ * Each bit represents a specific queue where bit 0 represents
+ * queue 0 and bit 7 represents queue 7.
+ * # A value of 0 indicates that the queue is not configurable
+ * by the hwrm_queue_pri2cos_cfg command.
+ * # A value of 1 indicates that the queue is configurable.
+ * # A hwrm_queue_pri2cos_cfg command shall return error when
+ * trying to configure a queue not configurable.
+ */
+ uint8_t queue_cos2bw_cfg_allowed;
+ /*
+ * ID of CoS Queue 0.
+ * FF - Invalid id
+ *
+ * # This ID can be used on any subsequent call to an hwrm command
+ * that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software.
+ * # Any driver or software should not make any assumptions about
+ * queue IDs.
+ * # A value of 0xff indicates that the queue is not available.
+ * # Available queues may not be in sequential order.
+ */
+ uint8_t queue_id0;
+ /* This value is applicable to CoS queues only. */
+ uint8_t queue_id0_service_profile;
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless (legacy) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /* Lossless RoCE */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS_ROCE \
+ UINT32_C(0x1)
+ /* Lossy RoCE CNP */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY_ROCE_CNP \
+ UINT32_C(0x2)
+ /* Lossless NIC */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS_NIC \
+ UINT32_C(0x3)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LAST \
+ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_UNKNOWN
+ /*
+ * ID of CoS Queue 1.
+ * FF - Invalid id
+ *
+ * # This ID can be used on any subsequent call to an hwrm command
+ * that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software.
+ * # Any driver or software should not make any assumptions about
+ * queue IDs.
+ * # A value of 0xff indicates that the queue is not available.
+ * # Available queues may not be in sequential order.
+ */
+ uint8_t queue_id1;
+ /* This value is applicable to CoS queues only. */
+ uint8_t queue_id1_service_profile;
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless (legacy) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /* Lossless RoCE */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS_ROCE \
+ UINT32_C(0x1)
+ /* Lossy RoCE CNP */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSY_ROCE_CNP \
+ UINT32_C(0x2)
+ /* Lossless NIC */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS_NIC \
+ UINT32_C(0x3)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LAST \
+ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_UNKNOWN
+ /*
+ * ID of CoS Queue 2.
+ * FF - Invalid id
+ *
+ * # This ID can be used on any subsequent call to an hwrm command
+ * that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software.
+ * # Any driver or software should not make any assumptions about
+ * queue IDs.
+ * # A value of 0xff indicates that the queue is not available.
+ * # Available queues may not be in sequential order.
+ */
+ uint8_t queue_id2;
+ /* This value is applicable to CoS queues only. */
+ uint8_t queue_id2_service_profile;
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless (legacy) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /* Lossless RoCE */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS_ROCE \
+ UINT32_C(0x1)
+ /* Lossy RoCE CNP */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSY_ROCE_CNP \
+ UINT32_C(0x2)
+ /* Lossless NIC */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS_NIC \
+ UINT32_C(0x3)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LAST \
+ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_UNKNOWN
+ /*
+ * ID of CoS Queue 3.
+ * FF - Invalid id
+ *
+ * # This ID can be used on any subsequent call to an hwrm command
+ * that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software.
+ * # Any driver or software should not make any assumptions about
+ * queue IDs.
+ * # A value of 0xff indicates that the queue is not available.
+ * # Available queues may not be in sequential order.
+ */
+ uint8_t queue_id3;
+ /* This value is applicable to CoS queues only. */
+ uint8_t queue_id3_service_profile;
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless (legacy) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /* Lossless RoCE */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS_ROCE \
+ UINT32_C(0x1)
+ /* Lossy RoCE CNP */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSY_ROCE_CNP \
+ UINT32_C(0x2)
+ /* Lossless NIC */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS_NIC \
+ UINT32_C(0x3)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LAST \
+ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_UNKNOWN
+ /*
+ * ID of CoS Queue 4.
+ * FF - Invalid id
+ *
+ * # This ID can be used on any subsequent call to an hwrm command
+ * that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software.
+ * # Any driver or software should not make any assumptions about
+ * queue IDs.
+ * # A value of 0xff indicates that the queue is not available.
+ * # Available queues may not be in sequential order.
+ */
+ uint8_t queue_id4;
+ /* This value is applicable to CoS queues only. */
+ uint8_t queue_id4_service_profile;
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless (legacy) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /* Lossless RoCE */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS_ROCE \
+ UINT32_C(0x1)
+ /* Lossy RoCE CNP */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSY_ROCE_CNP \
+ UINT32_C(0x2)
+ /* Lossless NIC */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS_NIC \
+ UINT32_C(0x3)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LAST \
+ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_UNKNOWN
+ /*
+ * ID of CoS Queue 5.
+ * FF - Invalid id
+ *
+ * # This ID can be used on any subsequent call to an hwrm command
+ * that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software.
+ * # Any driver or software should not make any assumptions about
+ * queue IDs.
+ * # A value of 0xff indicates that the queue is not available.
+ * # Available queues may not be in sequential order.
+ */
+ uint8_t queue_id5;
+ /* This value is applicable to CoS queues only. */
+ uint8_t queue_id5_service_profile;
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless (legacy) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /* Lossless RoCE */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS_ROCE \
+ UINT32_C(0x1)
+ /* Lossy RoCE CNP */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSY_ROCE_CNP \
+ UINT32_C(0x2)
+ /* Lossless NIC */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS_NIC \
+ UINT32_C(0x3)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LAST \
+ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_UNKNOWN
+ /*
+ * ID of CoS Queue 6.
+ * FF - Invalid id
+ *
+ * # This ID can be used on any subsequent call to an hwrm command
+ * that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software.
+ * # Any driver or software should not make any assumptions about
+ * queue IDs.
+ * # A value of 0xff indicates that the queue is not available.
+ * # Available queues may not be in sequential order.
+ */
+ uint8_t queue_id6;
+ /* This value is applicable to CoS queues only. */
+ uint8_t queue_id6_service_profile;
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless (legacy) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /* Lossless RoCE */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS_ROCE \
+ UINT32_C(0x1)
+ /* Lossy RoCE CNP */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSY_ROCE_CNP \
+ UINT32_C(0x2)
+ /* Lossless NIC */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS_NIC \
+ UINT32_C(0x3)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LAST \
+ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_UNKNOWN
+ /*
+ * ID of CoS Queue 7.
+ * FF - Invalid id
+ *
+ * # This ID can be used on any subsequent call to an hwrm command
+ * that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software.
+ * # Any driver or software should not make any assumptions about
+ * queue IDs.
+ * # A value of 0xff indicates that the queue is not available.
+ * # Available queues may not be in sequential order.
+ */
+ uint8_t queue_id7;
+ /* This value is applicable to CoS queues only. */
+ uint8_t queue_id7_service_profile;
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless (legacy) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /* Lossless RoCE */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS_ROCE \
+ UINT32_C(0x1)
+ /* Lossy RoCE CNP */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSY_ROCE_CNP \
+ UINT32_C(0x2)
+ /* Lossless NIC */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS_NIC \
+ UINT32_C(0x3)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LAST \
+ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN
+ uint8_t unused_0;
+ /*
+ * Up to 16 bytes of null padded ASCII string describing this queue.
+ * The queue name includes a CoS queue index and, in some cases, text
+ * that distinguishes the queue from other queues in the group.
+ */
+ char qid0_name[16];
+ /* Up to 16 bytes of null padded ASCII string describing this queue. */
+ char qid1_name[16];
+ /* Up to 16 bytes of null padded ASCII string describing this queue. */
+ char qid2_name[16];
+ /* Up to 16 bytes of null padded ASCII string describing this queue. */
+ char qid3_name[16];
+ /* Up to 16 bytes of null padded ASCII string describing this queue. */
+ char qid4_name[16];
+ /* Up to 16 bytes of null padded ASCII string describing this queue. */
+ char qid5_name[16];
+ /* Up to 16 bytes of null padded ASCII string describing this queue. */
+ char qid6_name[16];
+ /* Up to 16 bytes of null padded ASCII string describing this queue. */
+ char qid7_name[16];
+ uint8_t unused_1[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************
+ * hwrm_queue_qcfg *
+ *******************/
+
+
+/* hwrm_queue_qcfg_input (size:192b/24B) */
+struct hwrm_queue_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_LAST \
+ HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_RX
+ /* Queue ID of the queue. */
+ uint32_t queue_id;
+} __rte_packed;
+
+/* hwrm_queue_qcfg_output (size:128b/16B) */
+struct hwrm_queue_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * This value is the estimate packet length used in the
+ * TX arbiter.
+ */
+ uint32_t queue_len;
+ /* This value is applicable to CoS queues only. */
+ uint8_t service_profile;
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_LOSSY UINT32_C(0x0)
+ /* Lossless */
+ #define HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_LOSSLESS UINT32_C(0x1)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_UNKNOWN UINT32_C(0xff)
+ #define HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_LAST \
+ HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_UNKNOWN
+ /* Information about queue configuration. */
+ uint8_t queue_cfg_info;
+ /*
+ * If this flag is set to '1', then the queue is
+ * configured asymmetrically on TX and RX sides.
+ * If this flag is set to '0', then this queue is
+ * configured symmetrically on TX and RX sides.
+ */
+ #define HWRM_QUEUE_QCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG \
+ UINT32_C(0x1)
+ uint8_t unused_0;
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************
+ * hwrm_queue_cfg *
+ ******************/
+
+
+/* hwrm_queue_cfg_input (size:320b/40B) */
+struct hwrm_queue_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX, or both directions applicable to the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_MASK UINT32_C(0x3)
+ #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_SFT 0
+ /* tx path */
+ #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ /* Bi-directional (Symmetrically applicable to TX and RX paths) */
+ #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_BIDIR UINT32_C(0x2)
+ #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_LAST \
+ HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_BIDIR
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the dflt_len field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_CFG_INPUT_ENABLES_DFLT_LEN UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the service_profile field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_CFG_INPUT_ENABLES_SERVICE_PROFILE UINT32_C(0x2)
+ /* Queue ID of queue that is to be configured by this function. */
+ uint32_t queue_id;
+ /*
+ * This value is a the estimate packet length used in the
+ * TX arbiter.
+ * Set to 0xFF... (All Fs) to not adjust this value.
+ */
+ uint32_t dflt_len;
+ /* This value is applicable to CoS queues only. */
+ uint8_t service_profile;
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_LOSSY UINT32_C(0x0)
+ /* Lossless */
+ #define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_LOSSLESS UINT32_C(0x1)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_UNKNOWN UINT32_C(0xff)
+ #define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_LAST \
+ HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_UNKNOWN
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/* hwrm_queue_cfg_output (size:128b/16B) */
+struct hwrm_queue_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*****************************
+ * hwrm_queue_pfcenable_qcfg *
+ *****************************/
+
+
+/* hwrm_queue_pfcenable_qcfg_input (size:192b/24B) */
+struct hwrm_queue_pfcenable_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure pri2cos mapping on this port.
+ */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_queue_pfcenable_qcfg_output (size:128b/16B) */
+struct hwrm_queue_pfcenable_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t flags;
+ /* If set to 1, then PFC is enabled on PRI 0. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI0_PFC_ENABLED \
+ UINT32_C(0x1)
+ /* If set to 1, then PFC is enabled on PRI 1. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI1_PFC_ENABLED \
+ UINT32_C(0x2)
+ /* If set to 1, then PFC is enabled on PRI 2. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI2_PFC_ENABLED \
+ UINT32_C(0x4)
+ /* If set to 1, then PFC is enabled on PRI 3. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI3_PFC_ENABLED \
+ UINT32_C(0x8)
+ /* If set to 1, then PFC is enabled on PRI 4. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI4_PFC_ENABLED \
+ UINT32_C(0x10)
+ /* If set to 1, then PFC is enabled on PRI 5. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI5_PFC_ENABLED \
+ UINT32_C(0x20)
+ /* If set to 1, then PFC is enabled on PRI 6. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI6_PFC_ENABLED \
+ UINT32_C(0x40)
+ /* If set to 1, then PFC is enabled on PRI 7. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI7_PFC_ENABLED \
+ UINT32_C(0x80)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI0. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI0_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x100)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI1. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI1_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x200)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI2. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI2_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x400)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI3. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI3_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x800)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI4. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI4_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x1000)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI5. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI5_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x2000)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI6. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI6_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x4000)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI7. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI7_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x8000)
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/****************************
+ * hwrm_queue_pfcenable_cfg *
+ ****************************/
+
+
+/* hwrm_queue_pfcenable_cfg_input (size:192b/24B) */
+struct hwrm_queue_pfcenable_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /* If set to 1, then PFC is requested to be enabled on PRI 0. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI0_PFC_ENABLED \
+ UINT32_C(0x1)
+ /* If set to 1, then PFC is requested to be enabled on PRI 1. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI1_PFC_ENABLED \
+ UINT32_C(0x2)
+ /* If set to 1, then PFC is requested to be enabled on PRI 2. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI2_PFC_ENABLED \
+ UINT32_C(0x4)
+ /* If set to 1, then PFC is requested to be enabled on PRI 3. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI3_PFC_ENABLED \
+ UINT32_C(0x8)
+ /* If set to 1, then PFC is requested to be enabled on PRI 4. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI4_PFC_ENABLED \
+ UINT32_C(0x10)
+ /* If set to 1, then PFC is requested to be enabled on PRI 5. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI5_PFC_ENABLED \
+ UINT32_C(0x20)
+ /* If set to 1, then PFC is requested to be enabled on PRI 6. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI6_PFC_ENABLED \
+ UINT32_C(0x40)
+ /* If set to 1, then PFC is requested to be enabled on PRI 7. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI7_PFC_ENABLED \
+ UINT32_C(0x80)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI0. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI0_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x100)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI1. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI1_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x200)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI2. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI2_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x400)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI3. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI3_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x800)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI4. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI4_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x1000)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI5. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI5_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x2000)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI6. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI6_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x4000)
+ /* If set to 1, then PFC WatchDog is requested to be enabled on PRI7. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI7_PFC_WATCHDOG_ENABLED \
+ UINT32_C(0x8000)
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure pri2cos mapping on this port.
+ */
+ uint16_t port_id;
+ uint8_t unused_0[2];
+} __rte_packed;
+
+/* hwrm_queue_pfcenable_cfg_output (size:128b/16B) */
+struct hwrm_queue_pfcenable_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***************************
+ * hwrm_queue_pri2cos_qcfg *
+ ***************************/
+
+
+/* hwrm_queue_pri2cos_qcfg_input (size:192b/24B) */
+struct hwrm_queue_pri2cos_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_LAST \
+ HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_RX
+ /*
+ * When this bit is set to '0', the query is
+ * for PRI from tunnel headers.
+ * When this bit is set to '1', the query is
+ * for PRI from inner packet headers.
+ */
+ #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_IVLAN UINT32_C(0x2)
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure pri2cos mapping on this port.
+ */
+ uint8_t port_id;
+ uint8_t unused_0[3];
+} __rte_packed;
+
+/* hwrm_queue_pri2cos_qcfg_output (size:192b/24B) */
+struct hwrm_queue_pri2cos_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * CoS Queue assigned to priority 0. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no CoS queue is assigned to the
+ * specified priority.
+ */
+ uint8_t pri0_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 1. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no CoS queue is assigned to the
+ * specified priority.
+ */
+ uint8_t pri1_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 2. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no CoS queue is assigned to the
+ * specified priority.
+ */
+ uint8_t pri2_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 3. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no CoS queue is assigned to the
+ * specified priority.
+ */
+ uint8_t pri3_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 4. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no CoS queue is assigned to the
+ * specified priority.
+ */
+ uint8_t pri4_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 5. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no CoS queue is assigned to the
+ * specified priority.
+ */
+ uint8_t pri5_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 6. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no CoS queue is assigned to the
+ * specified priority.
+ */
+ uint8_t pri6_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 7. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no CoS queue is assigned to the
+ * specified priority.
+ */
+ uint8_t pri7_cos_queue_id;
+ /* Information about queue configuration. */
+ uint8_t queue_cfg_info;
+ /*
+ * If this flag is set to '1', then the PRI to CoS
+ * configuration is asymmetric on TX and RX sides.
+ * If this flag is set to '0', then PRI to CoS configuration
+ * is symmetric on TX and RX sides.
+ */
+ #define HWRM_QUEUE_PRI2COS_QCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG \
+ UINT32_C(0x1)
+ uint8_t unused_0[6];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**************************
+ * hwrm_queue_pri2cos_cfg *
+ **************************/
+
+
+/* hwrm_queue_pri2cos_cfg_input (size:320b/40B) */
+struct hwrm_queue_pri2cos_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX, or both directions applicable to the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_MASK UINT32_C(0x3)
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_SFT 0
+ /* tx path */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ /* Bi-directional (Symmetrically applicable to TX and RX paths) */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_BIDIR UINT32_C(0x2)
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_LAST \
+ HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_BIDIR
+ /*
+ * When this bit is set to '0', the mapping is requested
+ * for PRI from tunnel headers.
+ * When this bit is set to '1', the mapping is requested
+ * for PRI from inner packet headers.
+ */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_IVLAN UINT32_C(0x4)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the pri0_cos_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI0_COS_QUEUE_ID \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the pri1_cos_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI1_COS_QUEUE_ID \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the pri2_cos_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI2_COS_QUEUE_ID \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the pri3_cos_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI3_COS_QUEUE_ID \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the pri4_cos_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI4_COS_QUEUE_ID \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the pri5_cos_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI5_COS_QUEUE_ID \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the pri6_cos_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI6_COS_QUEUE_ID \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the pri7_cos_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI7_COS_QUEUE_ID \
+ UINT32_C(0x80)
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure pri2cos mapping on this port.
+ */
+ uint8_t port_id;
+ /*
+ * CoS Queue assigned to priority 0. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t pri0_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 1. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t pri1_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 2 This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t pri2_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 3. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t pri3_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 4. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t pri4_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 5. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t pri5_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 6. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t pri6_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 7. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t pri7_cos_queue_id;
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/* hwrm_queue_pri2cos_cfg_output (size:128b/16B) */
+struct hwrm_queue_pri2cos_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**************************
+ * hwrm_queue_cos2bw_qcfg *
+ **************************/
+
+
+/* hwrm_queue_cos2bw_qcfg_input (size:192b/24B) */
+struct hwrm_queue_cos2bw_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure TC BW assignment on this port.
+ */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_queue_cos2bw_qcfg_output (size:896b/112B) */
+struct hwrm_queue_cos2bw_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* ID of CoS Queue 0. */
+ uint8_t queue_id0;
+ uint8_t unused_0;
+ uint16_t unused_1;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id0_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id0_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id0_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id0_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id0_bw_weight;
+ /* ID of CoS Queue 1. */
+ uint8_t queue_id1;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id1_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id1_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id1_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id1_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id1_bw_weight;
+ /* ID of CoS Queue 2. */
+ uint8_t queue_id2;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id2_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id2_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id2_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id2_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id2_bw_weight;
+ /* ID of CoS Queue 3. */
+ uint8_t queue_id3;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id3_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id3_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id3_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id3_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id3_bw_weight;
+ /* ID of CoS Queue 4. */
+ uint8_t queue_id4;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id4_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id4_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id4_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id4_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id4_bw_weight;
+ /* ID of CoS Queue 5. */
+ uint8_t queue_id5;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id5_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id5_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id5_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id5_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id5_bw_weight;
+ /* ID of CoS Queue 6. */
+ uint8_t queue_id6;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id6_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id6_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id6_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id6_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id6_bw_weight;
+ /* ID of CoS Queue 7. */
+ uint8_t queue_id7;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id7_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id7_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id7_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id7_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id7_bw_weight;
+ uint8_t unused_2[4];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*************************
+ * hwrm_queue_cos2bw_cfg *
+ *************************/
+
+
+/* hwrm_queue_cos2bw_cfg_input (size:1024b/128B) */
+struct hwrm_queue_cos2bw_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ uint32_t enables;
+ /*
+ * If this bit is set to 1, then all queue_id0 related
+ * parameters in this command are valid.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID0_VALID \
+ UINT32_C(0x1)
+ /*
+ * If this bit is set to 1, then all queue_id1 related
+ * parameters in this command are valid.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID1_VALID \
+ UINT32_C(0x2)
+ /*
+ * If this bit is set to 1, then all queue_id2 related
+ * parameters in this command are valid.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID2_VALID \
+ UINT32_C(0x4)
+ /*
+ * If this bit is set to 1, then all queue_id3 related
+ * parameters in this command are valid.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID3_VALID \
+ UINT32_C(0x8)
+ /*
+ * If this bit is set to 1, then all queue_id4 related
+ * parameters in this command are valid.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID4_VALID \
+ UINT32_C(0x10)
+ /*
+ * If this bit is set to 1, then all queue_id5 related
+ * parameters in this command are valid.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID5_VALID \
+ UINT32_C(0x20)
+ /*
+ * If this bit is set to 1, then all queue_id6 related
+ * parameters in this command are valid.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID6_VALID \
+ UINT32_C(0x40)
+ /*
+ * If this bit is set to 1, then all queue_id7 related
+ * parameters in this command are valid.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID7_VALID \
+ UINT32_C(0x80)
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure TC BW assignment on this port.
+ */
+ uint16_t port_id;
+ /* ID of CoS Queue 0. */
+ uint8_t queue_id0;
+ uint8_t unused_0;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id0_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id0_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id0_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id0_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id0_bw_weight;
+ /* ID of CoS Queue 1. */
+ uint8_t queue_id1;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id1_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id1_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id1_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id1_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id1_bw_weight;
+ /* ID of CoS Queue 2. */
+ uint8_t queue_id2;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id2_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id2_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id2_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id2_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id2_bw_weight;
+ /* ID of CoS Queue 3. */
+ uint8_t queue_id3;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id3_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id3_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id3_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id3_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id3_bw_weight;
+ /* ID of CoS Queue 4. */
+ uint8_t queue_id4;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id4_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id4_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id4_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id4_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id4_bw_weight;
+ /* ID of CoS Queue 5. */
+ uint8_t queue_id5;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id5_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id5_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id5_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id5_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id5_bw_weight;
+ /* ID of CoS Queue 6. */
+ uint8_t queue_id6;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id6_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id6_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id6_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id6_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id6_bw_weight;
+ /* ID of CoS Queue 7. */
+ uint8_t queue_id7;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id7_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id7_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id7_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id7_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id7_bw_weight;
+ uint8_t unused_1[5];
+} __rte_packed;
+
+/* hwrm_queue_cos2bw_cfg_output (size:128b/16B) */
+struct hwrm_queue_cos2bw_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*************************
+ * hwrm_queue_dscp_qcaps *
+ *************************/
+
+
+/* hwrm_queue_dscp_qcaps_input (size:192b/24B) */
+struct hwrm_queue_dscp_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure pri2cos mapping on this port.
+ */
+ uint8_t port_id;
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/* hwrm_queue_dscp_qcaps_output (size:128b/16B) */
+struct hwrm_queue_dscp_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* The number of bits provided by the hardware for the DSCP value. */
+ uint8_t num_dscp_bits;
+ uint8_t unused_0;
+ /* Max number of DSCP-MASK-PRI entries supported. */
+ uint16_t max_entries;
+ uint8_t unused_1[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/****************************
+ * hwrm_queue_dscp2pri_qcfg *
+ ****************************/
+
+
+/* hwrm_queue_dscp2pri_qcfg_input (size:256b/32B) */
+struct hwrm_queue_dscp2pri_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the 24-bits DSCP-MASK-PRI
+ * tuple(s) will be copied to.
+ */
+ uint64_t dest_data_addr;
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure pri2cos mapping on this port.
+ */
+ uint8_t port_id;
+ uint8_t unused_0;
+ /* Size of the buffer pointed to by dest_data_addr. */
+ uint16_t dest_data_buffer_size;
+ uint8_t unused_1[4];
+} __rte_packed;
+
+/* hwrm_queue_dscp2pri_qcfg_output (size:128b/16B) */
+struct hwrm_queue_dscp2pri_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * A count of the number of DSCP-MASK-PRI tuple(s) pointed to
+ * by the dest_data_addr.
+ */
+ uint16_t entry_cnt;
+ /*
+ * This is the default PRI which un-initialized DSCP values are
+ * mapped to.
+ */
+ uint8_t default_pri;
+ uint8_t unused_0[4];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***************************
+ * hwrm_queue_dscp2pri_cfg *
+ ***************************/
+
+
+/* hwrm_queue_dscp2pri_cfg_input (size:320b/40B) */
+struct hwrm_queue_dscp2pri_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the 24-bits DSCP-MASK-PRI tuple
+ * will be copied from.
+ */
+ uint64_t src_data_addr;
+ uint32_t flags;
+ /* use_hw_default_pri is 1 b */
+ #define HWRM_QUEUE_DSCP2PRI_CFG_INPUT_FLAGS_USE_HW_DEFAULT_PRI \
+ UINT32_C(0x1)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the default_pri field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_DSCP2PRI_CFG_INPUT_ENABLES_DEFAULT_PRI \
+ UINT32_C(0x1)
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure pri2cos mapping on this port.
+ */
+ uint8_t port_id;
+ /*
+ * This is the default PRI which un-initialized DSCP values will be
+ * mapped to.
+ */
+ uint8_t default_pri;
+ /*
+ * A count of the number of DSCP-MASK-PRI tuple(s) in the data pointed
+ * to by src_data_addr.
+ */
+ uint16_t entry_cnt;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_queue_dscp2pri_cfg_output (size:128b/16B) */
+struct hwrm_queue_dscp2pri_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*************************
+ * hwrm_queue_mpls_qcaps *
+ *************************/
+
+
+/* hwrm_queue_mpls_qcaps_input (size:192b/24B) */
+struct hwrm_queue_mpls_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure MPLS TC(EXP) to pri mapping on this port.
+ */
+ uint8_t port_id;
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/* hwrm_queue_mpls_qcaps_output (size:128b/16B) */
+struct hwrm_queue_mpls_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * Bitmask indicating which queues can be configured by the
+ * hwrm_queue_mplstc2pri_cfg command.
+ *
+ * Each bit represents a specific pri where bit 0 represents
+ * pri 0 and bit 7 represents pri 7.
+ * # A value of 0 indicates that the pri is not configurable
+ * by the hwrm_queue_mplstc2pri_cfg command.
+ * # A value of 1 indicates that the pri is configurable.
+ * # A hwrm_queue_mplstc2pri_cfg command shall return error when
+ * trying to configure a pri that is not configurable.
+ */
+ uint8_t queue_mplstc2pri_cfg_allowed;
+ /*
+ * This is the default PRI which un-initialized MPLS values will be
+ * mapped to.
+ */
+ uint8_t hw_default_pri;
+ uint8_t unused_0[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************************
+ * hwrm_queue_mplstc2pri_qcfg *
+ ******************************/
+
+
+/* hwrm_queue_mplstc2pri_qcfg_input (size:192b/24B) */
+struct hwrm_queue_mplstc2pri_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure MPLS TC(EXP) to pri mapping on this port.
+ */
+ uint8_t port_id;
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/* hwrm_queue_mplstc2pri_qcfg_output (size:192b/24B) */
+struct hwrm_queue_mplstc2pri_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * pri assigned to MPLS TC(EXP) 0. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 0.
+ */
+ uint8_t tc0_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 1. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 1.
+ */
+ uint8_t tc1_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 2. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 2.
+ */
+ uint8_t tc2_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 3. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 3.
+ */
+ uint8_t tc3_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 4. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 4.
+ */
+ uint8_t tc4_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 5. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 5.
+ */
+ uint8_t tc5_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 6. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 6.
+ */
+ uint8_t tc6_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 7. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 7.
+ */
+ uint8_t tc7_pri_queue_id;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*****************************
+ * hwrm_queue_mplstc2pri_cfg *
+ *****************************/
+
+
+/* hwrm_queue_mplstc2pri_cfg_input (size:256b/32B) */
+struct hwrm_queue_mplstc2pri_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the mplstc0_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC0_PRI_QUEUE_ID \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the mplstc1_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC1_PRI_QUEUE_ID \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the mplstc2_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC2_PRI_QUEUE_ID \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the mplstc3_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC3_PRI_QUEUE_ID \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the mplstc4_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC4_PRI_QUEUE_ID \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the mplstc5_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC5_PRI_QUEUE_ID \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the mplstc6_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC6_PRI_QUEUE_ID \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the mplstc7_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC7_PRI_QUEUE_ID \
+ UINT32_C(0x80)
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure MPLS TC(EXP)to pri mapping on this port.
+ */
+ uint8_t port_id;
+ uint8_t unused_0[3];
+ /*
+ * pri assigned to MPLS TC(EXP) 0. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc0_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 1. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc1_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 2 This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc2_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 3. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc3_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 4. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc4_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 5. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc5_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 6. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc6_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 7. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc7_pri_queue_id;
+} __rte_packed;
+
+/* hwrm_queue_mplstc2pri_cfg_output (size:128b/16B) */
+struct hwrm_queue_mplstc2pri_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************
+ * hwrm_vnic_alloc *
+ *******************/
+
+
+/* hwrm_vnic_alloc_input (size:192b/24B) */
+struct hwrm_vnic_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * When this bit is '1', this VNIC is requested to
+ * be the default VNIC for this function.
+ */
+ #define HWRM_VNIC_ALLOC_INPUT_FLAGS_DEFAULT UINT32_C(0x1)
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_vnic_alloc_output (size:128b/16B) */
+struct hwrm_vnic_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Logical vnic ID */
+ uint32_t vnic_id;
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************
+ * hwrm_vnic_free *
+ ******************/
+
+
+/* hwrm_vnic_free_input (size:192b/24B) */
+struct hwrm_vnic_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Logical vnic ID */
+ uint32_t vnic_id;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_vnic_free_output (size:128b/16B) */
+struct hwrm_vnic_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*****************
+ * hwrm_vnic_cfg *
+ *****************/
+
+
+/* hwrm_vnic_cfg_input (size:384b/48B) */
+struct hwrm_vnic_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC is requested to
+ * be the default VNIC for the function.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC is being configured to
+ * strip VLAN in the RX path.
+ * If set to '0', then VLAN stripping is disabled on
+ * this VNIC.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC is being configured to
+ * buffer receive packets in the hardware until the host
+ * posts new receive buffers.
+ * If set to '0', then bd_stall is being configured to be
+ * disabled on this VNIC.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_BD_STALL_MODE \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC is being configured to
+ * receive both RoCE and non-RoCE traffic.
+ * If set to '0', then this VNIC is not configured to be
+ * operating in dual VNIC mode.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_DUAL_VNIC_MODE \
+ UINT32_C(0x8)
+ /*
+ * When this flag is set to '1', the VNIC is requested to
+ * be configured to receive only RoCE traffic.
+ * If this flag is set to '0', then this flag shall be
+ * ignored by the HWRM.
+ * If roce_dual_vnic_mode flag is set to '1'
+ * or roce_mirroring_capable_vnic_mode flag to 1,
+ * then the HWRM client shall not set this flag to '1'.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_ONLY_VNIC_MODE \
+ UINT32_C(0x10)
+ /*
+ * When a VNIC uses one destination ring group for certain
+ * application (e.g. Receive Flow Steering) where
+ * exact match is used to direct packets to a VNIC with one
+ * destination ring group only, there is no need to configure
+ * RSS indirection table for that VNIC as only one destination
+ * ring group is used.
+ *
+ * This flag is used to enable a mode where
+ * RSS is enabled in the VNIC using a RSS context
+ * for computing RSS hash but the RSS indirection table is
+ * not configured using hwrm_vnic_rss_cfg.
+ *
+ * If this mode is enabled, then the driver should not program
+ * RSS indirection table for the RSS context that is used for
+ * computing RSS hash only.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_RSS_DFLT_CR_MODE \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1', the VNIC is being configured to
+ * receive both RoCE and non-RoCE traffic, but forward only the
+ * RoCE traffic further. Also, RoCE traffic can be mirrored to
+ * L2 driver.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \
+ UINT32_C(0x40)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the dflt_ring_grp field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the rss_rule field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the cos_rule field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_COS_RULE \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the lb_rule field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_LB_RULE \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the mru field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_MRU \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the default_rx_ring_id field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_DEFAULT_RX_RING_ID \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the default_cmpl_ring_id field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_DEFAULT_CMPL_RING_ID \
+ UINT32_C(0x40)
+ /* This bit must be '1' for the queue_id field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_QUEUE_ID \
+ UINT32_C(0x80)
+ /* This bit must be '1' for the rx_csum_v2_mode field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_RX_CSUM_V2_MODE \
+ UINT32_C(0x100)
+ /* Logical vnic ID */
+ uint16_t vnic_id;
+ /*
+ * Default Completion ring for the VNIC. This ring will
+ * be chosen if packet does not match any RSS rules and if
+ * there is no COS rule.
+ */
+ uint16_t dflt_ring_grp;
+ /*
+ * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if
+ * there is no RSS rule.
+ */
+ uint16_t rss_rule;
+ /*
+ * RSS ID for COS rule/table structure. 0xFF... (All Fs) if
+ * there is no COS rule.
+ */
+ uint16_t cos_rule;
+ /*
+ * RSS ID for load balancing rule/table structure.
+ * 0xFF... (All Fs) if there is no LB rule.
+ */
+ uint16_t lb_rule;
+ /*
+ * The maximum receive unit of the vnic.
+ * Each vnic is associated with a function.
+ * The vnic mru value overwrites the mru setting of the
+ * associated function.
+ * The HWRM shall make sure that vnic mru does not exceed
+ * the mru of the port the function is associated with.
+ */
+ uint16_t mru;
+ /*
+ * Default Rx ring for the VNIC. This ring will
+ * be chosen if packet does not match any RSS rules.
+ * The aggregation ring associated with the Rx ring is
+ * implied based on the Rx ring specified when the
+ * aggregation ring was allocated.
+ */
+ uint16_t default_rx_ring_id;
+ /*
+ * Default completion ring for the VNIC. This ring will
+ * be chosen if packet does not match any RSS rules.
+ */
+ uint16_t default_cmpl_ring_id;
+ /*
+ * When specified, only incoming packets classified to the specified CoS
+ * queue ID will be arriving on this VNIC. Packet priority to CoS mapping
+ * rules can be specified using HWRM_QUEUE_PRI2COS_CFG. In this mode,
+ * ntuple filters with VNIC destination specified are invalid since they
+ * conflict with the the CoS to VNIC steering rules in this mode.
+ *
+ * If this field is not specified, packet to VNIC steering will be
+ * subject to the standard L2 filter rules and any additional ntuple
+ * filter rules with destination VNIC specified.
+ */
+ uint16_t queue_id;
+ /*
+ * If the device supports the RX V2 and RX TPA start V2 completion
+ * records as indicated by the HWRM_VNIC_QCAPS command, this field is
+ * used to specify the two RX checksum modes supported by these
+ * completion records.
+ */
+ uint8_t rx_csum_v2_mode;
+ /*
+ * When configured with this checksum mode, the number of header
+ * groups in the delivered packet with a valid IP checksum and
+ * the number of header groups in the delivered packet with a valid
+ * L4 checksum are reported. Valid checksums are counted from the
+ * outermost header group to the innermost header group, stopping at
+ * the first error. This is the default checksum mode supported if
+ * the driver doesn't explicitly configure the RX checksum mode.
+ */
+ #define HWRM_VNIC_CFG_INPUT_RX_CSUM_V2_MODE_DEFAULT UINT32_C(0x0)
+ /*
+ * When configured with this checksum mode, the checksum status is
+ * reported using 'all ok' mode. In the RX completion record, one
+ * bit indicates if the IP checksum is valid for all the parsed
+ * header groups with an IP checksum. Another bit indicates if the
+ * L4 checksum is valid for all the parsed header groups with an L4
+ * checksum. The number of header groups that were parsed by the
+ * chip and passed in the delivered packet is also reported.
+ */
+ #define HWRM_VNIC_CFG_INPUT_RX_CSUM_V2_MODE_ALL_OK UINT32_C(0x1)
+ /*
+ * Any rx_csum_v2_mode value larger than or equal to this is not
+ * valid
+ */
+ #define HWRM_VNIC_CFG_INPUT_RX_CSUM_V2_MODE_MAX UINT32_C(0x2)
+ #define HWRM_VNIC_CFG_INPUT_RX_CSUM_V2_MODE_LAST \
+ HWRM_VNIC_CFG_INPUT_RX_CSUM_V2_MODE_MAX
+ uint8_t unused0[5];
+} __rte_packed;
+
+/* hwrm_vnic_cfg_output (size:128b/16B) */
+struct hwrm_vnic_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************
+ * hwrm_vnic_qcfg *
+ ******************/
+
+
+/* hwrm_vnic_qcfg_input (size:256b/32B) */
+struct hwrm_vnic_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the vf_id_valid field to be
+ * configured.
+ */
+ #define HWRM_VNIC_QCFG_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1)
+ /* Logical vnic ID */
+ uint32_t vnic_id;
+ /* ID of Virtual Function whose VNIC resource is being queried. */
+ uint16_t vf_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_vnic_qcfg_output (size:256b/32B) */
+struct hwrm_vnic_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Default Completion ring for the VNIC. */
+ uint16_t dflt_ring_grp;
+ /*
+ * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if
+ * there is no RSS rule.
+ */
+ uint16_t rss_rule;
+ /*
+ * RSS ID for COS rule/table structure. 0xFF... (All Fs) if
+ * there is no COS rule.
+ */
+ uint16_t cos_rule;
+ /*
+ * RSS ID for load balancing rule/table structure.
+ * 0xFF... (All Fs) if there is no LB rule.
+ */
+ uint16_t lb_rule;
+ /* The maximum receive unit of the vnic. */
+ uint16_t mru;
+ uint8_t unused_0[2];
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC is the default VNIC for
+ * the function.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_DEFAULT \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC is configured to
+ * strip VLAN in the RX path.
+ * If set to '0', then VLAN stripping is disabled on
+ * this VNIC.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_VLAN_STRIP_MODE \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC is configured to
+ * buffer receive packets in the hardware until the host
+ * posts new receive buffers.
+ * If set to '0', then bd_stall is disabled on
+ * this VNIC.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_BD_STALL_MODE \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC is configured to
+ * receive both RoCE and non-RoCE traffic.
+ * If set to '0', then this VNIC is not configured to
+ * operate in dual VNIC mode.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_DUAL_VNIC_MODE \
+ UINT32_C(0x8)
+ /*
+ * When this flag is set to '1', the VNIC is configured to
+ * receive only RoCE traffic.
+ * When this flag is set to '0', the VNIC is not configured
+ * to receive only RoCE traffic.
+ * If roce_dual_vnic_mode flag and this flag both are set
+ * to '1', then it is an invalid configuration of the
+ * VNIC. The HWRM should not allow that type of
+ * mis-configuration by HWRM clients.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_ONLY_VNIC_MODE \
+ UINT32_C(0x10)
+ /*
+ * When a VNIC uses one destination ring group for certain
+ * application (e.g. Receive Flow Steering) where
+ * exact match is used to direct packets to a VNIC with one
+ * destination ring group only, there is no need to configure
+ * RSS indirection table for that VNIC as only one destination
+ * ring group is used.
+ *
+ * When this bit is set to '1', then the VNIC is enabled in a
+ * mode where RSS is enabled in the VNIC using a RSS context
+ * for computing RSS hash but the RSS indirection table is
+ * not configured.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_RSS_DFLT_CR_MODE \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1', the VNIC is configured to
+ * receive both RoCE and non-RoCE traffic, but forward only
+ * RoCE traffic further. Also RoCE traffic can be mirrored to
+ * L2 driver.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \
+ UINT32_C(0x40)
+ /*
+ * When returned with a valid CoS Queue id, the CoS Queue/VNIC association
+ * is valid. Otherwise it will return 0xFFFF to indicate no VNIC/CoS
+ * queue association.
+ */
+ uint16_t queue_id;
+ /*
+ * If the device supports the RX V2 and RX TPA start V2 completion
+ * records as indicated by the HWRM_VNIC_QCAPS command, this field is
+ * used to specify the current RX checksum mode configured for all the
+ * RX rings of a VNIC.
+ */
+ uint8_t rx_csum_v2_mode;
+ /*
+ * This value indicates that the VNIC is configured to use the
+ * default RX checksum mode for all the rings associated with this
+ * VNIC.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_RX_CSUM_V2_MODE_DEFAULT UINT32_C(0x0)
+ /*
+ * This value indicates that the VNIC is configured to use the RX
+ * checksum ‘all_ok’ mode for all the rings associated with this
+ * VNIC.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_RX_CSUM_V2_MODE_ALL_OK UINT32_C(0x1)
+ /*
+ * Any rx_csum_v2_mode value larger than or equal to this is not
+ * valid
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_RX_CSUM_V2_MODE_MAX UINT32_C(0x2)
+ #define HWRM_VNIC_QCFG_OUTPUT_RX_CSUM_V2_MODE_LAST \
+ HWRM_VNIC_QCFG_OUTPUT_RX_CSUM_V2_MODE_MAX
+ uint8_t unused_1[4];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************
+ * hwrm_vnic_qcaps *
+ *******************/
+
+
+/* hwrm_vnic_qcaps_input (size:192b/24B) */
+struct hwrm_vnic_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_vnic_qcaps_output (size:192b/24B) */
+struct hwrm_vnic_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* The maximum receive unit that is settable on a vnic. */
+ uint16_t mru;
+ uint8_t unused_0[2];
+ uint32_t flags;
+ /* Unused. */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_UNUSED \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', the capability of stripping VLAN in
+ * the RX path is supported on VNIC(s).
+ * If set to '0', then VLAN stripping capability is
+ * not supported on VNIC(s).
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_VLAN_STRIP_CAP \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', the capability to buffer receive
+ * packets in the hardware until the host posts new receive buffers
+ * is supported on VNIC(s).
+ * If set to '0', then bd_stall capability is not supported
+ * on VNIC(s).
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_BD_STALL_CAP \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', the capability to
+ * receive both RoCE and non-RoCE traffic on VNIC(s) is
+ * supported.
+ * If set to '0', then the capability to receive
+ * both RoCE and non-RoCE traffic on VNIC(s) is
+ * not supported.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_DUAL_VNIC_CAP \
+ UINT32_C(0x8)
+ /*
+ * When this bit is set to '1', the capability to configure
+ * a VNIC to receive only RoCE traffic is supported.
+ * When this flag is set to '0', the VNIC capability to
+ * configure to receive only RoCE traffic is not supported.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_ONLY_VNIC_CAP \
+ UINT32_C(0x10)
+ /*
+ * When this bit is set to '1', then the capability to enable
+ * a VNIC in a mode where RSS context without configuring
+ * RSS indirection table is supported (for RSS hash computation).
+ * When this bit is set to '0', then a VNIC can not be configured
+ * with a mode to enable RSS context without configuring RSS
+ * indirection table.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_RSS_DFLT_CR_CAP \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1', the capability to
+ * mirror the the RoCE traffic is supported.
+ * If set to '0', then the capability to mirror the
+ * RoCE traffic is not supported.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_CAP \
+ UINT32_C(0x40)
+ /*
+ * When this bit is '1', the outermost RSS hashing capability
+ * is supported. If set to '0', then the outermost RSS hashing
+ * capability is not supported.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_OUTERMOST_RSS_CAP \
+ UINT32_C(0x80)
+ /*
+ * When this bit is '1', it indicates that firmware supports the
+ * ability to steer incoming packets from one CoS queue to one
+ * VNIC. This optional feature can then be enabled
+ * using HWRM_VNIC_CFG on any VNIC. This feature is only
+ * available when NVM option “enable_cos_classfication” is set
+ * to 1. If set to '0', firmware does not support this feature.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_COS_ASSIGNMENT_CAP \
+ UINT32_C(0x100)
+ /*
+ * When this bit is '1', it indicates that HW and firmware supports
+ * the use of RX V2 and RX TPA start V2 completion records for all
+ * the RX rings of a VNIC. Once set, this feature is mandatory to
+ * be used for the RX rings of the VNIC. Additionally, two new RX
+ * checksum features supported by these ompletion records can be
+ * configured using the HWRM_VNIC_CFG on a VNIC. If set to '0', the
+ * HW and the firmware does not support this feature.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_RX_CMPL_V2_CAP \
+ UINT32_C(0x200)
+ /*
+ * This field advertises the maximum concurrent TPA aggregations
+ * supported by the VNIC on new devices that support TPA v2.
+ * '0' means that TPA v2 is not supported.
+ */
+ uint16_t max_aggs_supported;
+ uint8_t unused_1[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*********************
+ * hwrm_vnic_tpa_cfg *
+ *********************/
+
+
+/* hwrm_vnic_tpa_cfg_input (size:320b/40B) */
+struct hwrm_vnic_tpa_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) of
+ * non-tunneled TCP packets.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_TPA \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) of
+ * tunneled TCP packets.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_ENCAP_TPA \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) according
+ * to Windows Receive Segment Coalescing (RSC) rules.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_RSC_WND_UPDATE \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) according
+ * to Linux Generic Receive Offload (GRO) rules.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) for TCP
+ * packets with IP ECN set to non-zero.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_ECN \
+ UINT32_C(0x10)
+ /*
+ * When this bit is '1', the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) for
+ * GRE tunneled TCP packets only if all packets have the
+ * same GRE sequence.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_SAME_GRE_SEQ \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1' and the GRO mode is enabled,
+ * the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) for
+ * TCP/IPv4 packets with consecutively increasing IPIDs.
+ * In other words, the last packet that is being
+ * aggregated to an already existing aggregation context
+ * shall have IPID 1 more than the IPID of the last packet
+ * that was aggregated in that aggregation context.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_IPID_CHECK \
+ UINT32_C(0x40)
+ /*
+ * When this bit is '1' and the GRO mode is enabled,
+ * the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) for
+ * TCP packets with the same TTL (IPv4) or Hop limit (IPv6)
+ * value.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_TTL_CHECK \
+ UINT32_C(0x80)
+ /*
+ * When this bit is '1' and the GRO mode is enabled,
+ * the VNIC shall DMA payload data using GRO rules.
+ * When this bit is '0', the VNIC shall DMA payload data
+ * using the more efficient LRO rules of filling all
+ * aggregation buffers.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_PACK_AS_GRO \
+ UINT32_C(0x100)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the max_agg_segs field to be
+ * configured.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_SEGS UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the max_aggs field to be
+ * configured.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGGS UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the max_agg_timer field to be
+ * configured.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_TIMER UINT32_C(0x4)
+ /* deprecated bit. Do not use!!! */
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MIN_AGG_LEN UINT32_C(0x8)
+ /* Logical vnic ID */
+ uint16_t vnic_id;
+ /*
+ * This is the maximum number of TCP segments that can
+ * be aggregated (unit is Log2). Max value is 31. On new
+ * devices supporting TPA v2, the unit is multiples of 4 and
+ * valid values are > 0 and <= 63.
+ */
+ uint16_t max_agg_segs;
+ /* 1 segment */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_1 UINT32_C(0x0)
+ /* 2 segments */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_2 UINT32_C(0x1)
+ /* 4 segments */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_4 UINT32_C(0x2)
+ /* 8 segments */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_8 UINT32_C(0x3)
+ /* Any segment size larger than this is not valid */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX UINT32_C(0x1f)
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_LAST \
+ HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX
+ /*
+ * This is the maximum number of aggregations this VNIC is
+ * allowed (unit is Log2). Max value is 7. On new devices
+ * supporting TPA v2, this is in unit of 1 and must be > 0
+ * and <= max_aggs_supported in the hwrm_vnic_qcaps response
+ * to enable TPA v2.
+ */
+ uint16_t max_aggs;
+ /* 1 aggregation */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_1 UINT32_C(0x0)
+ /* 2 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_2 UINT32_C(0x1)
+ /* 4 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_4 UINT32_C(0x2)
+ /* 8 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_8 UINT32_C(0x3)
+ /* 16 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_16 UINT32_C(0x4)
+ /* Any aggregation size larger than this is not valid */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX UINT32_C(0x7)
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_LAST \
+ HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX
+ uint8_t unused_0[2];
+ /*
+ * This is the maximum amount of time allowed for
+ * an aggregation context to complete after it was initiated.
+ */
+ uint32_t max_agg_timer;
+ /*
+ * This is the minimum amount of payload length required to
+ * start an aggregation context. This field is deprecated and
+ * should be set to 0. The minimum length is set by firmware
+ * and can be queried using hwrm_vnic_tpa_qcfg.
+ */
+ uint32_t min_agg_len;
+} __rte_packed;
+
+/* hwrm_vnic_tpa_cfg_output (size:128b/16B) */
+struct hwrm_vnic_tpa_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*********************
+ * hwrm_vnic_rss_cfg *
+ *********************/
+
+
+/* hwrm_vnic_rss_cfg_input (size:384b/48B) */
+struct hwrm_vnic_rss_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t hash_type;
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source and destination IPv4 addresses of IPv4
+ * packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4 UINT32_C(0x1)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv4 addresses and
+ * source/destination ports of TCP/IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv4 addresses and
+ * source/destination ports of UDP/IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source and destination IPv4 addresses of IPv6
+ * packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6 UINT32_C(0x8)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv6 addresses and
+ * source/destination ports of TCP/IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv6 addresses and
+ * source/destination ports of UDP/IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20)
+ /* VNIC ID of VNIC associated with RSS table being configured. */
+ uint16_t vnic_id;
+ /*
+ * Specifies which VNIC ring table pair to configure.
+ * Valid values range from 0 to 7.
+ */
+ uint8_t ring_table_pair_index;
+ /* Flags to specify different RSS hash modes. */
+ uint8_t hash_mode_flags;
+ /*
+ * When this bit is '1', it indicates using current RSS
+ * hash mode setting configured in the device.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_DEFAULT \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over innermost 4 tuples {l3.src, l3.dest,
+ * l4.src, l4.dest} for tunnel packets. For none-tunnel
+ * packets, the RSS hash is computed over the normal
+ * src/dest l3 and src/dest l4 headers.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_INNERMOST_4 \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over innermost 2 tuples {l3.src, l3.dest} for
+ * tunnel packets. For none-tunnel packets, the RSS hash is
+ * computed over the normal src/dest l3 headers.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_INNERMOST_2 \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over outermost 4 tuples {t_l3.src, t_l3.dest,
+ * t_l4.src, t_l4.dest} for tunnel packets. For none-tunnel
+ * packets, the RSS hash is computed over the normal
+ * src/dest l3 and src/dest l4 headers.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_OUTERMOST_4 \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over outermost 2 tuples {t_l3.src, t_l3.dest} for
+ * tunnel packets. For none-tunnel packets, the RSS hash is
+ * computed over the normal src/dest l3 headers.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_OUTERMOST_2 \
+ UINT32_C(0x10)
+ /* This is the address for rss ring group table */
+ uint64_t ring_grp_tbl_addr;
+ /* This is the address for rss hash key table */
+ uint64_t hash_key_tbl_addr;
+ /* Index to the rss indirection table. */
+ uint16_t rss_ctx_idx;
+ uint8_t unused_1[6];
+} __rte_packed;
+
+/* hwrm_vnic_rss_cfg_output (size:128b/16B) */
+struct hwrm_vnic_rss_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/* hwrm_vnic_rss_cfg_cmd_err (size:64b/8B) */
+struct hwrm_vnic_rss_cfg_cmd_err {
+ /*
+ * command specific error codes that goes to
+ * the cmd_err field in Common HWRM Error Response.
+ */
+ uint8_t code;
+ /* Unknown error */
+ #define HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_UNKNOWN \
+ UINT32_C(0x0)
+ /*
+ * Unable to change global RSS mode to outer due to all active
+ * interfaces are not ready to support outer RSS hashing.
+ */
+ #define HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_INTERFACE_NOT_READY \
+ UINT32_C(0x1)
+ #define HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_LAST \
+ HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_INTERFACE_NOT_READY
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/**********************
+ * hwrm_vnic_rss_qcfg *
+ **********************/
+
+
+/* hwrm_vnic_rss_qcfg_input (size:192b/24B) */
+struct hwrm_vnic_rss_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Index to the rss indirection table. */
+ uint16_t rss_ctx_idx;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_vnic_rss_qcfg_output (size:512b/64B) */
+struct hwrm_vnic_rss_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t hash_type;
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source and destination IPv4 addresses of IPv4
+ * packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_IPV4 UINT32_C(0x1)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv4 addresses and
+ * source/destination ports of TCP/IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv4 addresses and
+ * source/destination ports of UDP/IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source and destination IPv4 addresses of IPv6
+ * packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_IPV6 UINT32_C(0x8)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv6 addresses and
+ * source/destination ports of TCP/IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv6 addresses and
+ * source/destination ports of UDP/IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20)
+ uint8_t unused_0[4];
+ /* This is the value of rss hash key */
+ uint32_t hash_key[10];
+ /* Flags to specify different RSS hash modes. */
+ uint8_t hash_mode_flags;
+ /*
+ * When this bit is '1', it indicates using current RSS
+ * hash mode setting configured in the device.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_DEFAULT \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over innermost 4 tuples {l3.src, l3.dest,
+ * l4.src, l4.dest} for tunnel packets. For none-tunnel
+ * packets, the RSS hash is computed over the normal
+ * src/dest l3 and src/dest l4 headers.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_INNERMOST_4 \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over innermost 2 tuples {l3.src, l3.dest} for
+ * tunnel packets. For none-tunnel packets, the RSS hash is
+ * computed over the normal src/dest l3 headers.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_INNERMOST_2 \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over outermost 4 tuples {t_l3.src, t_l3.dest,
+ * t_l4.src, t_l4.dest} for tunnel packets. For none-tunnel
+ * packets, the RSS hash is computed over the normal
+ * src/dest l3 and src/dest l4 headers.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_OUTERMOST_4 \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over outermost 2 tuples {t_l3.src, t_l3.dest} for
+ * tunnel packets. For none-tunnel packets, the RSS hash is
+ * computed over the normal src/dest l3 headers.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_OUTERMOST_2 \
+ UINT32_C(0x10)
+ uint8_t unused_1[6];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**************************
+ * hwrm_vnic_plcmodes_cfg *
+ **************************/
+
+
+/* hwrm_vnic_plcmodes_cfg_input (size:320b/40B) */
+struct hwrm_vnic_plcmodes_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC shall be configured to
+ * use regular placement algorithm.
+ * By default, the regular placement algorithm shall be
+ * enabled on the VNIC.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_REGULAR_PLACEMENT \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC shall be configured
+ * use the jumbo placement algorithm.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_JUMBO_PLACEMENT \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC shall be configured
+ * to enable Header-Data split for IPv4 packets according
+ * to the following rules:
+ * # If the packet is identified as TCP/IPv4, then the
+ * packet is split at the beginning of the TCP payload.
+ * # If the packet is identified as UDP/IPv4, then the
+ * packet is split at the beginning of UDP payload.
+ * # If the packet is identified as non-TCP and non-UDP
+ * IPv4 packet, then the packet is split at the beginning
+ * of the upper layer protocol header carried in the IPv4
+ * packet.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV4 \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC shall be configured
+ * to enable Header-Data split for IPv6 packets according
+ * to the following rules:
+ * # If the packet is identified as TCP/IPv6, then the
+ * packet is split at the beginning of the TCP payload.
+ * # If the packet is identified as UDP/IPv6, then the
+ * packet is split at the beginning of UDP payload.
+ * # If the packet is identified as non-TCP and non-UDP
+ * IPv6 packet, then the packet is split at the beginning
+ * of the upper layer protocol header carried in the IPv6
+ * packet.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV6 \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', the VNIC shall be configured
+ * to enable Header-Data split for FCoE packets at the
+ * beginning of FC payload.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_FCOE \
+ UINT32_C(0x10)
+ /*
+ * When this bit is '1', the VNIC shall be configured
+ * to enable Header-Data split for RoCE packets at the
+ * beginning of RoCE payload (after BTH/GRH headers).
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_ROCE \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1', the VNIC shall be configured use the virtio
+ * placement algorithm. This feature can only be configured when
+ * proxy mode is supported on the function.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_VIRTIO_PLACEMENT \
+ UINT32_C(0x40)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the jumbo_thresh_valid field to be
+ * configured.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_JUMBO_THRESH_VALID \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the hds_offset_valid field to be
+ * configured.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_OFFSET_VALID \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the hds_threshold_valid field to be
+ * configured.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_THRESHOLD_VALID \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the max_bds_valid field to be
+ * configured.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_MAX_BDS_VALID \
+ UINT32_C(0x8)
+ /* Logical vnic ID */
+ uint32_t vnic_id;
+ /*
+ * When jumbo placement algorithm is enabled, this value
+ * is used to determine the threshold for jumbo placement.
+ * Packets with length larger than this value will be
+ * placed according to the jumbo placement algorithm.
+ */
+ uint16_t jumbo_thresh;
+ /*
+ * This value is used to determine the offset into
+ * packet buffer where the split data (payload) will be
+ * placed according to one of HDS placement algorithm.
+ *
+ * The lengths of packet buffers provided for split data
+ * shall be larger than this value.
+ */
+ uint16_t hds_offset;
+ /*
+ * When one of the HDS placement algorithm is enabled, this
+ * value is used to determine the threshold for HDS
+ * placement.
+ * Packets with length larger than this value will be
+ * placed according to the HDS placement algorithm.
+ * This value shall be in multiple of 4 bytes.
+ */
+ uint16_t hds_threshold;
+ /*
+ * When virtio placement algorithm is enabled, this
+ * value is used to determine the the maximum number of BDs
+ * that can be used to place an Rx Packet.
+ * If an incoming packet does not fit in the buffers described
+ * by the max BDs, the packet will be dropped and an error
+ * will be reported in the completion. Valid values for this
+ * field are between 1 and 8. If the VNIC uses header-data-
+ * separation and/or TPA with buffer spanning enabled, valid
+ * values for this field are between 2 and 8.
+ * This feature can only be configured when proxy mode is
+ * supported on the function.
+ */
+ uint16_t max_bds;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_vnic_plcmodes_cfg_output (size:128b/16B) */
+struct hwrm_vnic_plcmodes_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***************************
+ * hwrm_vnic_plcmodes_qcfg *
+ ***************************/
+
+
+/* hwrm_vnic_plcmodes_qcfg_input (size:192b/24B) */
+struct hwrm_vnic_plcmodes_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Logical vnic ID */
+ uint32_t vnic_id;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_vnic_plcmodes_qcfg_output (size:192b/24B) */
+struct hwrm_vnic_plcmodes_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC is configured to
+ * use regular placement algorithm.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_REGULAR_PLACEMENT \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC is configured to
+ * use the jumbo placement algorithm.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_JUMBO_PLACEMENT \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC is configured
+ * to enable Header-Data split for IPv4 packets.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV4 \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC is configured
+ * to enable Header-Data split for IPv6 packets.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV6 \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', the VNIC is configured
+ * to enable Header-Data split for FCoE packets.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_FCOE \
+ UINT32_C(0x10)
+ /*
+ * When this bit is '1', the VNIC is configured
+ * to enable Header-Data split for RoCE packets.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_ROCE \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1', the VNIC is configured
+ * to be the default VNIC of the requesting function.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_DFLT_VNIC \
+ UINT32_C(0x40)
+ /*
+ * When this bit is '1', the VNIC is configured to use the virtio
+ * placement algorithm. This feature can only be configured when
+ * proxy mode is supported on the function.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_VIRTIO_PLACEMENT \
+ UINT32_C(0x80)
+ /*
+ * When jumbo placement algorithm is enabled, this value
+ * is used to determine the threshold for jumbo placement.
+ * Packets with length larger than this value will be
+ * placed according to the jumbo placement algorithm.
+ */
+ uint16_t jumbo_thresh;
+ /*
+ * This value is used to determine the offset into
+ * packet buffer where the split data (payload) will be
+ * placed according to one of HDS placement algorithm.
+ *
+ * The lengths of packet buffers provided for split data
+ * shall be larger than this value.
+ */
+ uint16_t hds_offset;
+ /*
+ * When one of the HDS placement algorithm is enabled, this
+ * value is used to determine the threshold for HDS
+ * placement.
+ * Packets with length larger than this value will be
+ * placed according to the HDS placement algorithm.
+ * This value shall be in multiple of 4 bytes.
+ */
+ uint16_t hds_threshold;
+ /*
+ * When virtio placement algorithm is enabled, this
+ * value is used to determine the the maximum number of BDs
+ * that can be used to place an Rx Packet.
+ * If an incoming packet does not fit in the buffers described
+ * by the max BDs, the packet will be dropped and an error
+ * will be reported in the completion. Valid values for this
+ * field are between 1 and 8. If the VNIC uses header-data-
+ * separation and/or TPA with buffer spanning enabled, valid
+ * values for this field are between 2 and 8.
+ * This feature can only be configured when proxy mode is supported
+ * on the function
+ */
+ uint16_t max_bds;
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************************
+ * hwrm_vnic_rss_cos_lb_ctx_alloc *
+ **********************************/
+
+
+/* hwrm_vnic_rss_cos_lb_ctx_alloc_input (size:128b/16B) */
+struct hwrm_vnic_rss_cos_lb_ctx_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+} __rte_packed;
+
+/* hwrm_vnic_rss_cos_lb_ctx_alloc_output (size:128b/16B) */
+struct hwrm_vnic_rss_cos_lb_ctx_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* rss_cos_lb_ctx_id is 16 b */
+ uint16_t rss_cos_lb_ctx_id;
+ uint8_t unused_0[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*********************************
+ * hwrm_vnic_rss_cos_lb_ctx_free *
+ *********************************/
+
+
+/* hwrm_vnic_rss_cos_lb_ctx_free_input (size:192b/24B) */
+struct hwrm_vnic_rss_cos_lb_ctx_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* rss_cos_lb_ctx_id is 16 b */
+ uint16_t rss_cos_lb_ctx_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_vnic_rss_cos_lb_ctx_free_output (size:128b/16B) */
+struct hwrm_vnic_rss_cos_lb_ctx_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************
+ * hwrm_ring_alloc *
+ *******************/
+
+
+/* hwrm_ring_alloc_input (size:704b/88B) */
+struct hwrm_ring_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the ring_arb_cfg field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RING_ARB_CFG \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the stat_ctx_id_valid field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_STAT_CTX_ID_VALID \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the max_bw_valid field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_MAX_BW_VALID \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the rx_ring_id field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RX_RING_ID_VALID \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the nq_ring_id field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_NQ_RING_ID_VALID \
+ UINT32_C(0x80)
+ /*
+ * This bit must be '1' for the rx_buf_size field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RX_BUF_SIZE_VALID \
+ UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the schq_id field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_SCHQ_ID \
+ UINT32_C(0x200)
+ /* Ring Type. */
+ uint8_t ring_type;
+ /* L2 Completion Ring (CR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0)
+ /* TX Ring (TR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_TX UINT32_C(0x1)
+ /* RX Ring (RR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX UINT32_C(0x2)
+ /* RoCE Notification Completion Ring (ROCE_CR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
+ /* RX Aggregation Ring */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX_AGG UINT32_C(0x4)
+ /* Notification Queue */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_NQ UINT32_C(0x5)
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_LAST \
+ HWRM_RING_ALLOC_INPUT_RING_TYPE_NQ
+ uint8_t unused_0;
+ /* Ring allocation flags. */
+ uint16_t flags;
+ /*
+ * For Rx rings, the incoming packet data can be placed at either
+ * a 0B or 2B offset from the start of the Rx packet buffer. When
+ * '1', the received packet will be padded with 2B of zeros at the
+ * front of the packet. Note that this flag is only used for
+ * Rx rings and is ignored for all other rings included Rx
+ * Aggregation rings.
+ */
+ #define HWRM_RING_ALLOC_INPUT_FLAGS_RX_SOP_PAD UINT32_C(0x1)
+ /*
+ * This value is a pointer to the page table for the
+ * Ring.
+ */
+ uint64_t page_tbl_addr;
+ /* First Byte Offset of the first entry in the first page. */
+ uint32_t fbo;
+ /*
+ * Actual page size in 2^page_size. The supported range is increments
+ * in powers of 2 from 16 bytes to 1GB.
+ * - 4 = 16 B
+ * Page size is 16 B.
+ * - 12 = 4 KB
+ * Page size is 4 KB.
+ * - 13 = 8 KB
+ * Page size is 8 KB.
+ * - 16 = 64 KB
+ * Page size is 64 KB.
+ * - 21 = 2 MB
+ * Page size is 2 MB.
+ * - 22 = 4 MB
+ * Page size is 4 MB.
+ * - 30 = 1 GB
+ * Page size is 1 GB.
+ */
+ uint8_t page_size;
+ /*
+ * This value indicates the depth of page table.
+ * For this version of the specification, value other than 0 or
+ * 1 shall be considered as an invalid value.
+ * When the page_tbl_depth = 0, then it is treated as a
+ * special case with the following.
+ * 1. FBO and page size fields are not valid.
+ * 2. page_tbl_addr is the physical address of the first
+ * element of the ring.
+ */
+ uint8_t page_tbl_depth;
+ /* Used by a PF driver to associate a SCHQ with one of its TX rings. */
+ uint16_t schq_id;
+ /*
+ * Number of 16B units in the ring. Minimum size for
+ * a ring is 16 16B entries.
+ */
+ uint32_t length;
+ /*
+ * Logical ring number for the ring to be allocated.
+ * This value determines the position in the doorbell
+ * area where the update to the ring will be made.
+ *
+ * For completion rings, this value is also the MSI-X
+ * vector number for the function the completion ring is
+ * associated with.
+ */
+ uint16_t logical_id;
+ /*
+ * This field is used only when ring_type is a TX ring.
+ * This value indicates what completion ring the TX ring
+ * is associated with.
+ */
+ uint16_t cmpl_ring_id;
+ /*
+ * This field is used only when ring_type is a TX ring.
+ * This value indicates what CoS queue the TX ring
+ * is associated with.
+ */
+ uint16_t queue_id;
+ /*
+ * When allocating a Rx ring or Rx aggregation ring, this field
+ * specifies the size of the buffer descriptors posted to the ring.
+ */
+ uint16_t rx_buf_size;
+ /*
+ * When allocating an Rx aggregation ring, this field
+ * specifies the associated Rx ring ID.
+ */
+ uint16_t rx_ring_id;
+ /*
+ * When allocating a completion ring, this field
+ * specifies the associated NQ ring ID.
+ */
+ uint16_t nq_ring_id;
+ /*
+ * This field is used only when ring_type is a TX ring.
+ * This field is used to configure arbitration related
+ * parameters for a TX ring.
+ */
+ uint16_t ring_arb_cfg;
+ /* Arbitration policy used for the ring. */
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_MASK \
+ UINT32_C(0xf)
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SFT 0
+ /*
+ * Use strict priority for the TX ring.
+ * Priority value is specified in arb_policy_param
+ */
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SP \
+ UINT32_C(0x1)
+ /*
+ * Use weighted fair queue arbitration for the TX ring.
+ * Weight is specified in arb_policy_param
+ */
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ \
+ UINT32_C(0x2)
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_LAST \
+ HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ
+ /* Reserved field. */
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_SFT 4
+ /*
+ * Arbitration policy specific parameter.
+ * # For strict priority arbitration policy, this field
+ * represents a priority value. If set to 0, then the priority
+ * is not specified and the HWRM is allowed to select
+ * any priority for this TX ring.
+ * # For weighted fair queue arbitration policy, this field
+ * represents a weight value. If set to 0, then the weight
+ * is not specified and the HWRM is allowed to select
+ * any weight for this TX ring.
+ */
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_MASK \
+ UINT32_C(0xff00)
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_SFT 8
+ uint16_t unused_3;
+ /*
+ * This field is reserved for the future use.
+ * It shall be set to 0.
+ */
+ uint32_t reserved3;
+ /*
+ * This field is used only when ring_type is a TX ring.
+ * This input indicates what statistics context this ring
+ * should be associated with.
+ */
+ uint32_t stat_ctx_id;
+ /*
+ * This field is reserved for the future use.
+ * It shall be set to 0.
+ */
+ uint32_t reserved4;
+ /*
+ * This field is used only when ring_type is a TX ring
+ * to specify maximum BW allocated to the TX ring.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this ring inside the device.
+ */
+ uint32_t max_bw;
+ /* The bandwidth value. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_SFT 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_LAST \
+ HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_SFT 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * This field is used only when ring_type is a Completion ring.
+ * This value indicates what interrupt mode should be used
+ * on this completion ring.
+ * Note: In the legacy interrupt mode, no more than 16
+ * completion rings are allowed.
+ */
+ uint8_t int_mode;
+ /* Legacy INTA */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_LEGACY UINT32_C(0x0)
+ /* Reserved */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_RSVD UINT32_C(0x1)
+ /* MSI-X */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_MSIX UINT32_C(0x2)
+ /* No Interrupt - Polled mode */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_POLL UINT32_C(0x3)
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_LAST \
+ HWRM_RING_ALLOC_INPUT_INT_MODE_POLL
+ uint8_t unused_4[3];
+ /*
+ * The cq_handle is specified when allocating a completion ring. For
+ * devices that support NQs, this cq_handle will be included in the
+ * NQE to specify which CQ should be read to retrieve the completion
+ * record.
+ */
+ uint64_t cq_handle;
+} __rte_packed;
+
+/* hwrm_ring_alloc_output (size:128b/16B) */
+struct hwrm_ring_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * Physical number of ring allocated.
+ * This value shall be unique for a ring type.
+ */
+ uint16_t ring_id;
+ /* Logical number of ring allocated. */
+ uint16_t logical_ring_id;
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************
+ * hwrm_ring_free *
+ ******************/
+
+
+/* hwrm_ring_free_input (size:192b/24B) */
+struct hwrm_ring_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Ring Type. */
+ uint8_t ring_type;
+ /* L2 Completion Ring (CR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0)
+ /* TX Ring (TR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_TX UINT32_C(0x1)
+ /* RX Ring (RR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_RX UINT32_C(0x2)
+ /* RoCE Notification Completion Ring (ROCE_CR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
+ /* RX Aggregation Ring */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_RX_AGG UINT32_C(0x4)
+ /* Notification Queue */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_NQ UINT32_C(0x5)
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_LAST \
+ HWRM_RING_FREE_INPUT_RING_TYPE_NQ
+ uint8_t unused_0;
+ /* Physical number of ring allocated. */
+ uint16_t ring_id;
+ uint8_t unused_1[4];
+} __rte_packed;
+
+/* hwrm_ring_free_output (size:128b/16B) */
+struct hwrm_ring_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************
+ * hwrm_ring_reset *
+ *******************/
+
+
+/* hwrm_ring_reset_input (size:192b/24B) */
+struct hwrm_ring_reset_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Ring Type. */
+ uint8_t ring_type;
+ /* L2 Completion Ring (CR) */
+ #define HWRM_RING_RESET_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0)
+ /* TX Ring (TR) */
+ #define HWRM_RING_RESET_INPUT_RING_TYPE_TX UINT32_C(0x1)
+ /* RX Ring (RR) */
+ #define HWRM_RING_RESET_INPUT_RING_TYPE_RX UINT32_C(0x2)
+ /* RoCE Notification Completion Ring (ROCE_CR) */
+ #define HWRM_RING_RESET_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
+ /*
+ * Rx Ring Group. This is to reset rx and aggregation in an atomic
+ * operation. Completion ring associated with this ring group is
+ * not reset.
+ */
+ #define HWRM_RING_RESET_INPUT_RING_TYPE_RX_RING_GRP UINT32_C(0x6)
+ #define HWRM_RING_RESET_INPUT_RING_TYPE_LAST \
+ HWRM_RING_RESET_INPUT_RING_TYPE_RX_RING_GRP
+ uint8_t unused_0;
+ /*
+ * Physical number of the ring. When ring type is rx_ring_grp, ring id
+ * actually refers to ring group id.
+ */
+ uint16_t ring_id;
+ uint8_t unused_1[4];
+} __rte_packed;
+
+/* hwrm_ring_reset_output (size:128b/16B) */
+struct hwrm_ring_reset_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[4];
+ /* Position of consumer index after ring reset completes. */
+ uint8_t consumer_idx[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*****************
+ * hwrm_ring_cfg *
+ *****************/
+
+
+/* hwrm_ring_cfg_input (size:256b/32B) */
+struct hwrm_ring_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Ring Type. */
+ uint8_t ring_type;
+ /* TX Ring (TR) */
+ #define HWRM_RING_CFG_INPUT_RING_TYPE_TX UINT32_C(0x1)
+ /* RX Ring (RR) */
+ #define HWRM_RING_CFG_INPUT_RING_TYPE_RX UINT32_C(0x2)
+ #define HWRM_RING_CFG_INPUT_RING_TYPE_LAST \
+ HWRM_RING_CFG_INPUT_RING_TYPE_RX
+ uint8_t unused_0;
+ /* Physical number of the ring. */
+ uint16_t ring_id;
+ /* Ring config enable bits. */
+ uint16_t enables;
+ /*
+ * For Rx rings, the incoming packet data can be placed at either
+ * a 0B, 2B, 10B or 12B offset from the start of the Rx packet
+ * buffer.
+ * When '1', the received packet will be padded with 2B, 10B or 12B
+ * of zeros at the front of the packet. The exact offset is specified
+ * by rx_sop_pad_bytes parameter.
+ * When '0', the received packet will not be padded.
+ * Note that this flag is only used for Rx rings and is ignored
+ * for all other rings included Rx Aggregation rings.
+ */
+ #define HWRM_RING_CFG_INPUT_ENABLES_RX_SOP_PAD_ENABLE \
+ UINT32_C(0x1)
+ /*
+ * Proxy mode enable, for Tx, Rx and Rx aggregation rings only.
+ * When rings are allocated, the PCI function on which driver issues
+ * HWRM_RING_CFG command is assumed to own the rings. Hardware takes
+ * the buffer descriptors (BDs) from those rings is assumed to issue
+ * packet payload DMA using same PCI function. When proxy mode is
+ * enabled, hardware can perform payload DMA using another PCI
+ * function on same or different host.
+ * When set to '0', the PCI function on which driver issues
+ * HWRM_RING_CFG command is used for host payload DMA operation.
+ * When set to '1', the host PCI function specified by proxy_fid is
+ * used for host payload DMA operation.
+ */
+ #define HWRM_RING_CFG_INPUT_ENABLES_PROXY_MODE_ENABLE \
+ UINT32_C(0x2)
+ /*
+ * Tx ring packet source interface override, for Tx rings only.
+ * When TX rings are allocated, the PCI function on which driver
+ * issues HWRM_RING_CFG is assumed to be source interface of
+ * packets sent from TX ring.
+ * When set to '1', the host PCI function specified by proxy_fid
+ * is used as source interface of the transmitted packets.
+ */
+ #define HWRM_RING_CFG_INPUT_ENABLES_TX_PROXY_SRC_INTF_OVERRIDE \
+ UINT32_C(0x4)
+ /* The schq_id field is valid */
+ #define HWRM_RING_CFG_INPUT_ENABLES_SCHQ_ID \
+ UINT32_C(0x8)
+ /* Update completion ring ID associated with Tx or Rx ring. */
+ #define HWRM_RING_CFG_INPUT_ENABLES_CMPL_RING_ID_UPDATE \
+ UINT32_C(0x10)
+ /*
+ * Proxy function FID value.
+ * This value is only used when either proxy_mode_enable flag or
+ * tx_proxy_svif_override is set to '1'.
+ * When proxy_mode_enable is set to '1', it identifies a host PCI
+ * function used for host payload DMA operations.
+ * When tx_proxy_src_intf is set to '1', it identifies a host PCI
+ * function as source interface for all transmitted packets from
+ * the TX ring.
+ */
+ uint16_t proxy_fid;
+ /*
+ * Identifies the new scheduler queue (SCHQ) to associate with the
+ * ring. Only valid for Tx rings.
+ * A value of zero indicates that the Tx ring should be associated
+ * with the default scheduler queue (SCHQ).
+ */
+ uint16_t schq_id;
+ /*
+ * This field is valid for TX or Rx rings. This value identifies the
+ * new completion ring ID to associate with the TX or Rx ring.
+ */
+ uint16_t cmpl_ring_id;
+ /*
+ * Rx SOP padding amount in bytes.
+ * This value is only used when rx_sop_pad_enable flag is set to '1'.
+ */
+ uint8_t rx_sop_pad_bytes;
+ uint8_t unused_1[3];
+} __rte_packed;
+
+/* hwrm_ring_cfg_output (size:128b/16B) */
+struct hwrm_ring_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************
+ * hwrm_ring_qcfg *
+ ******************/
+
+
+/* hwrm_ring_qcfg_input (size:192b/24B) */
+struct hwrm_ring_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Ring Type. */
+ uint8_t ring_type;
+ /* TX Ring (TR) */
+ #define HWRM_RING_QCFG_INPUT_RING_TYPE_TX UINT32_C(0x1)
+ /* RX Ring (RR) */
+ #define HWRM_RING_QCFG_INPUT_RING_TYPE_RX UINT32_C(0x2)
+ #define HWRM_RING_QCFG_INPUT_RING_TYPE_LAST \
+ HWRM_RING_QCFG_INPUT_RING_TYPE_RX
+ uint8_t unused_0[5];
+ /* Physical number of the ring. */
+ uint16_t ring_id;
+} __rte_packed;
+
+/* hwrm_ring_qcfg_output (size:192b/24B) */
+struct hwrm_ring_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Ring config enable bits. */
+ uint16_t enables;
+ /*
+ * For Rx rings, the incoming packet data can be placed at either
+ * a 0B, 2B, 10B or 12B offset from the start of the Rx packet
+ * buffer.
+ * When '1', the received packet will be padded with 2B, 10B or 12B
+ * of zeros at the front of the packet. The exact offset is specified
+ * by rx_sop_pad_bytes parameter.
+ * When '0', the received packet will not be padded.
+ * Note that this flag is only used for Rx rings and is ignored
+ * for all other rings included Rx Aggregation rings.
+ */
+ #define HWRM_RING_QCFG_OUTPUT_ENABLES_RX_SOP_PAD_ENABLE \
+ UINT32_C(0x1)
+ /*
+ * Proxy mode enable, for Tx, Rx and Rx aggregation rings only.
+ * When rings are allocated, the PCI function on which driver issues
+ * HWRM_RING_CFG command is assumed to own the rings. Hardware takes
+ * the buffer descriptors (BDs) from those rings is assumed to issue
+ * packet payload DMA using same PCI function. When proxy mode is
+ * enabled, hardware can perform payload DMA using another PCI
+ * function on same or different host.
+ * When set to '0', the PCI function on which driver issues
+ * HWRM_RING_CFG command is used for host payload DMA operation.
+ * When set to '1', the host PCI function specified by proxy_fid is
+ * used for host payload DMA operation.
+ */
+ #define HWRM_RING_QCFG_OUTPUT_ENABLES_PROXY_MODE_ENABLE \
+ UINT32_C(0x2)
+ /*
+ * Tx ring packet source interface override, for Tx rings only.
+ * When TX rings are allocated, the PCI function on which driver
+ * issues HWRM_RING_CFG is assumed to be source interface of
+ * packets sent from TX ring.
+ * When set to '1', the host PCI function specified by proxy_fid is
+ * used as source interface of the transmitted packets.
+ */
+ #define HWRM_RING_QCFG_OUTPUT_ENABLES_TX_PROXY_SRC_INTF_OVERRIDE \
+ UINT32_C(0x4)
+ /*
+ * Proxy function FID value.
+ * This value is only used when either proxy_mode_enable flag or
+ * tx_proxy_svif_override is set to '1'.
+ * When proxy_mode_enable is set to '1', it identifies a host PCI
+ * function used for host payload DMA operations.
+ * When tx_proxy_src_intf is set to '1', it identifies a host PCI
+ * function as source interface for all transmitted packets from the TX
+ * ring.
+ */
+ uint16_t proxy_fid;
+ /*
+ * Identifies the new scheduler queue (SCHQ) to associate with the
+ * ring. Only valid for Tx rings.
+ * A value of zero indicates that the Tx ring should be associated with
+ * the default scheduler queue (SCHQ).
+ */
+ uint16_t schq_id;
+ /*
+ * This field is used when ring_type is a TX or Rx ring.
+ * This value indicates what completion ring the TX or Rx ring
+ * is associated with.
+ */
+ uint16_t cmpl_ring_id;
+ /*
+ * Rx SOP padding amount in bytes.
+ * This value is only used when rx_sop_pad_enable flag is set to '1'.
+ */
+ uint8_t rx_sop_pad_bytes;
+ uint8_t unused_0[6];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**************************
+ * hwrm_ring_aggint_qcaps *
+ **************************/
+
+
+/* hwrm_ring_aggint_qcaps_input (size:128b/16B) */
+struct hwrm_ring_aggint_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+} __rte_packed;
+
+/* hwrm_ring_aggint_qcaps_output (size:384b/48B) */
+struct hwrm_ring_aggint_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t cmpl_params;
+ /*
+ * When this bit is set to '1', int_lat_tmr_min can be configured
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_INT_LAT_TMR_MIN \
+ UINT32_C(0x1)
+ /*
+ * When this bit is set to '1', int_lat_tmr_max can be configured
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_INT_LAT_TMR_MAX \
+ UINT32_C(0x2)
+ /*
+ * When this bit is set to '1', timer_reset can be enabled
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_TIMER_RESET \
+ UINT32_C(0x4)
+ /*
+ * When this bit is set to '1', ring_idle can be enabled
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_RING_IDLE \
+ UINT32_C(0x8)
+ /*
+ * When this bit is set to '1', num_cmpl_dma_aggr can be configured
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_NUM_CMPL_DMA_AGGR \
+ UINT32_C(0x10)
+ /*
+ * When this bit is set to '1', num_cmpl_dma_aggr_during_int can be configured
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_NUM_CMPL_DMA_AGGR_DURING_INT \
+ UINT32_C(0x20)
+ /*
+ * When this bit is set to '1', cmpl_aggr_dma_tmr can be configured
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_CMPL_AGGR_DMA_TMR \
+ UINT32_C(0x40)
+ /*
+ * When this bit is set to '1', cmpl_aggr_dma_tmr_during_int can be configured
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_CMPL_AGGR_DMA_TMR_DURING_INT \
+ UINT32_C(0x80)
+ /*
+ * When this bit is set to '1', num_cmpl_aggr_int can be configured
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_NUM_CMPL_AGGR_INT \
+ UINT32_C(0x100)
+ uint32_t nq_params;
+ /*
+ * When this bit is set to '1', int_lat_tmr_min can be configured
+ * on notification queues.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_NQ_PARAMS_INT_LAT_TMR_MIN \
+ UINT32_C(0x1)
+ /* Minimum value for num_cmpl_dma_aggr */
+ uint16_t num_cmpl_dma_aggr_min;
+ /* Maximum value for num_cmpl_dma_aggr */
+ uint16_t num_cmpl_dma_aggr_max;
+ /* Minimum value for num_cmpl_dma_aggr_during_int */
+ uint16_t num_cmpl_dma_aggr_during_int_min;
+ /* Maximum value for num_cmpl_dma_aggr_during_int */
+ uint16_t num_cmpl_dma_aggr_during_int_max;
+ /* Minimum value for cmpl_aggr_dma_tmr */
+ uint16_t cmpl_aggr_dma_tmr_min;
+ /* Maximum value for cmpl_aggr_dma_tmr */
+ uint16_t cmpl_aggr_dma_tmr_max;
+ /* Minimum value for cmpl_aggr_dma_tmr_during_int */
+ uint16_t cmpl_aggr_dma_tmr_during_int_min;
+ /* Maximum value for cmpl_aggr_dma_tmr_during_int */
+ uint16_t cmpl_aggr_dma_tmr_during_int_max;
+ /* Minimum value for int_lat_tmr_min */
+ uint16_t int_lat_tmr_min_min;
+ /* Maximum value for int_lat_tmr_min */
+ uint16_t int_lat_tmr_min_max;
+ /* Minimum value for int_lat_tmr_max */
+ uint16_t int_lat_tmr_max_min;
+ /* Maximum value for int_lat_tmr_max */
+ uint16_t int_lat_tmr_max_max;
+ /* Minimum value for num_cmpl_aggr_int */
+ uint16_t num_cmpl_aggr_int_min;
+ /* Maximum value for num_cmpl_aggr_int */
+ uint16_t num_cmpl_aggr_int_max;
+ /* The units for timer parameters, in nanoseconds. */
+ uint16_t timer_units;
+ uint8_t unused_0[1];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**************************************
+ * hwrm_ring_cmpl_ring_qaggint_params *
+ **************************************/
+
+
+/* hwrm_ring_cmpl_ring_qaggint_params_input (size:192b/24B) */
+struct hwrm_ring_cmpl_ring_qaggint_params_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Physical number of completion ring. */
+ uint16_t ring_id;
+ uint16_t flags;
+ #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_INPUT_FLAGS_UNUSED_0_MASK \
+ UINT32_C(0x3)
+ #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_INPUT_FLAGS_UNUSED_0_SFT 0
+ /*
+ * Set this flag to 1 when querying parameters on a notification
+ * queue. Set this flag to 0 when querying parameters on a
+ * completion queue or completion ring.
+ */
+ #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_INPUT_FLAGS_IS_NQ \
+ UINT32_C(0x4)
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_ring_cmpl_ring_qaggint_params_output (size:256b/32B) */
+struct hwrm_ring_cmpl_ring_qaggint_params_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint16_t flags;
+ /*
+ * When this bit is set to '1', interrupt max
+ * timer is reset whenever a completion is received.
+ */
+ #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_OUTPUT_FLAGS_TIMER_RESET \
+ UINT32_C(0x1)
+ /*
+ * When this bit is set to '1', ring idle mode
+ * aggregation will be enabled.
+ */
+ #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_OUTPUT_FLAGS_RING_IDLE \
+ UINT32_C(0x2)
+ /*
+ * Number of completions to aggregate before DMA
+ * during the normal mode.
+ */
+ uint16_t num_cmpl_dma_aggr;
+ /*
+ * Number of completions to aggregate before DMA
+ * during the interrupt mode.
+ */
+ uint16_t num_cmpl_dma_aggr_during_int;
+ /*
+ * Timer used to aggregate completions before
+ * DMA during the normal mode (not in interrupt mode).
+ */
+ uint16_t cmpl_aggr_dma_tmr;
+ /*
+ * Timer used to aggregate completions before
+ * DMA when in interrupt mode.
+ */
+ uint16_t cmpl_aggr_dma_tmr_during_int;
+ /* Minimum time between two interrupts. */
+ uint16_t int_lat_tmr_min;
+ /*
+ * Maximum wait time spent aggregating
+ * completions before signaling the interrupt after the
+ * interrupt is enabled.
+ */
+ uint16_t int_lat_tmr_max;
+ /*
+ * Minimum number of completions aggregated before signaling
+ * an interrupt.
+ */
+ uint16_t num_cmpl_aggr_int;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*****************************************
+ * hwrm_ring_cmpl_ring_cfg_aggint_params *
+ *****************************************/
+
+
+/* hwrm_ring_cmpl_ring_cfg_aggint_params_input (size:320b/40B) */
+struct hwrm_ring_cmpl_ring_cfg_aggint_params_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Physical number of completion ring. */
+ uint16_t ring_id;
+ uint16_t flags;
+ /*
+ * When this bit is set to '1', interrupt latency max
+ * timer is reset whenever a completion is received.
+ */
+ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_TIMER_RESET \
+ UINT32_C(0x1)
+ /*
+ * When this bit is set to '1', ring idle mode
+ * aggregation will be enabled.
+ */
+ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_RING_IDLE \
+ UINT32_C(0x2)
+ /*
+ * Set this flag to 1 when configuring parameters on a
+ * notification queue. Set this flag to 0 when configuring
+ * parameters on a completion queue or completion ring.
+ */
+ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_IS_NQ \
+ UINT32_C(0x4)
+ /*
+ * Number of completions to aggregate before DMA
+ * during the normal mode.
+ */
+ uint16_t num_cmpl_dma_aggr;
+ /*
+ * Number of completions to aggregate before DMA
+ * during the interrupt mode.
+ */
+ uint16_t num_cmpl_dma_aggr_during_int;
+ /*
+ * Timer used to aggregate completions before
+ * DMA during the normal mode (not in interrupt mode).
+ */
+ uint16_t cmpl_aggr_dma_tmr;
+ /*
+ * Timer used to aggregate completions before
+ * DMA while in interrupt mode.
+ */
+ uint16_t cmpl_aggr_dma_tmr_during_int;
+ /* Minimum time between two interrupts. */
+ uint16_t int_lat_tmr_min;
+ /*
+ * Maximum wait time spent aggregating
+ * completions before signaling the interrupt after the
+ * interrupt is enabled.
+ */
+ uint16_t int_lat_tmr_max;
+ /*
+ * Minimum number of completions aggregated before signaling
+ * an interrupt.
+ */
+ uint16_t num_cmpl_aggr_int;
+ /*
+ * Bitfield that indicates which parameters are to be applied. Only
+ * required when configuring devices with notification queues, and
+ * used in that case to set certain parameters on completion queues
+ * and others on notification queues.
+ */
+ uint16_t enables;
+ /*
+ * This bit must be '1' for the num_cmpl_dma_aggr field to be
+ * configured.
+ */
+ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_DMA_AGGR \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the num_cmpl_dma_aggr_during_int field to be
+ * configured.
+ */
+ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_DMA_AGGR_DURING_INT \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the cmpl_aggr_dma_tmr field to be
+ * configured.
+ */
+ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_CMPL_AGGR_DMA_TMR \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the int_lat_tmr_min field to be
+ * configured.
+ */
+ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_INT_LAT_TMR_MIN \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the int_lat_tmr_max field to be
+ * configured.
+ */
+ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_INT_LAT_TMR_MAX \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the num_cmpl_aggr_int field to be
+ * configured.
+ */
+ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_AGGR_INT \
+ UINT32_C(0x20)
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_ring_cmpl_ring_cfg_aggint_params_output (size:128b/16B) */
+struct hwrm_ring_cmpl_ring_cfg_aggint_params_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***********************
+ * hwrm_ring_grp_alloc *
+ ***********************/
+
+
+/* hwrm_ring_grp_alloc_input (size:192b/24B) */
+struct hwrm_ring_grp_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * This value identifies the CR associated with the ring
+ * group.
+ */
+ uint16_t cr;
+ /*
+ * This value identifies the main RR associated with the ring
+ * group.
+ */
+ uint16_t rr;
+ /*
+ * This value identifies the aggregation RR associated with
+ * the ring group. If this value is 0xFF... (All Fs), then no
+ * Aggregation ring will be set.
+ */
+ uint16_t ar;
+ /*
+ * This value identifies the statistics context associated
+ * with the ring group.
+ */
+ uint16_t sc;
+} __rte_packed;
+
+/* hwrm_ring_grp_alloc_output (size:128b/16B) */
+struct hwrm_ring_grp_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * This is the ring group ID value. Use this value to program
+ * the default ring group for the VNIC or as table entries
+ * in an RSS/COS context.
+ */
+ uint32_t ring_group_id;
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************
+ * hwrm_ring_grp_free *
+ **********************/
+
+
+/* hwrm_ring_grp_free_input (size:192b/24B) */
+struct hwrm_ring_grp_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* This is the ring group ID value. */
+ uint32_t ring_group_id;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_ring_grp_free_output (size:128b/16B) */
+struct hwrm_ring_grp_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/************************
+ * hwrm_ring_schq_alloc *
+ ************************/
+
+
+/* hwrm_ring_schq_alloc_input (size:1088b/136B) */
+struct hwrm_ring_schq_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the tqm_ring0 fields to be
+ * configured.
+ */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_ENABLES_TQM_RING0 UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the tqm_ring1 fields to be
+ * configured.
+ */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_ENABLES_TQM_RING1 UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the tqm_ring2 fields to be
+ * configured.
+ */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_ENABLES_TQM_RING2 UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the tqm_ring3 fields to be
+ * configured.
+ */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_ENABLES_TQM_RING3 UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the tqm_ring4 fields to be
+ * configured.
+ */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_ENABLES_TQM_RING4 UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the tqm_ring5 fields to be
+ * configured.
+ */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_ENABLES_TQM_RING5 UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the tqm_ring6 fields to be
+ * configured.
+ */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_ENABLES_TQM_RING6 UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the tqm_ring7 fields to be
+ * configured.
+ */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_ENABLES_TQM_RING7 UINT32_C(0x80)
+ /* Reserved for future use. */
+ uint32_t reserved;
+ /* TQM ring 0 page size and level. */
+ uint8_t tqm_ring0_pg_size_tqm_ring0_lvl;
+ /* TQM ring 0 PBL indirect levels. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING0_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING0_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING0_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING0_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to PTE
+ * tables.
+ */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING0_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING0_LVL_LAST \
+ HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING0_LVL_LVL_2
+ /* TQM ring 0 page size. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_LAST \
+ HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING0_PG_SIZE_PG_1G
+ /* TQM ring 1 page size and level. */
+ uint8_t tqm_ring1_pg_size_tqm_ring1_lvl;
+ /* TQM ring 1 PBL indirect levels. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING1_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING1_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING1_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING1_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to PTE
+ * tables.
+ */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING1_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING1_LVL_LAST \
+ HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING1_LVL_LVL_2
+ /* TQM ring 1 page size. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_LAST \
+ HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING1_PG_SIZE_PG_1G
+ /* TQM ring 2 page size and level. */
+ uint8_t tqm_ring2_pg_size_tqm_ring2_lvl;
+ /* TQM ring 2 PBL indirect levels. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING2_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING2_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING2_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING2_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to PTE
+ * tables.
+ */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING2_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING2_LVL_LAST \
+ HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING2_LVL_LVL_2
+ /* TQM ring 2 page size. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_LAST \
+ HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING2_PG_SIZE_PG_1G
+ /* TQM ring 3 page size and level. */
+ uint8_t tqm_ring3_pg_size_tqm_ring3_lvl;
+ /* TQM ring 3 PBL indirect levels. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING3_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING3_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING3_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING3_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to PTE
+ * tables.
+ */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING3_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING3_LVL_LAST \
+ HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING3_LVL_LVL_2
+ /* TQM ring 3 page size. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_LAST \
+ HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING3_PG_SIZE_PG_1G
+ /* TQM ring 4 page size and level. */
+ uint8_t tqm_ring4_pg_size_tqm_ring4_lvl;
+ /* TQM ring 4 PBL indirect levels. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING4_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING4_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING4_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING4_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to PTE
+ * tables.
+ */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING4_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING4_LVL_LAST \
+ HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING4_LVL_LVL_2
+ /* TQM ring 4 page size. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_LAST \
+ HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING4_PG_SIZE_PG_1G
+ /* TQM ring 5 page size and level. */
+ uint8_t tqm_ring5_pg_size_tqm_ring5_lvl;
+ /* TQM ring 5 PBL indirect levels. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING5_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING5_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING5_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING5_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to PTE
+ * tables.
+ */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING5_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING5_LVL_LAST \
+ HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING5_LVL_LVL_2
+ /* TQM ring 5 page size. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_LAST \
+ HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING5_PG_SIZE_PG_1G
+ /* TQM ring 6 page size and level. */
+ uint8_t tqm_ring6_pg_size_tqm_ring6_lvl;
+ /* TQM ring 6 PBL indirect levels. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING6_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING6_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING6_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING6_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to PTE
+ * tables.
+ */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING6_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING6_LVL_LAST \
+ HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING6_LVL_LVL_2
+ /* TQM ring 6 page size. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_LAST \
+ HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING6_PG_SIZE_PG_1G
+ /* TQM ring 7 page size and level. */
+ uint8_t tqm_ring7_pg_size_tqm_ring7_lvl;
+ /* TQM ring 7 PBL indirect levels. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING7_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING7_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING7_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING7_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to PTE
+ * tables.
+ */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING7_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING7_LVL_LAST \
+ HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING7_LVL_LVL_2
+ /* TQM ring 7 page size. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_LAST \
+ HWRM_RING_SCHQ_ALLOC_INPUT_TQM_RING7_PG_SIZE_PG_1G
+ /* TQM ring 0 page directory. */
+ uint64_t tqm_ring0_page_dir;
+ /* TQM ring 1 page directory. */
+ uint64_t tqm_ring1_page_dir;
+ /* TQM ring 2 page directory. */
+ uint64_t tqm_ring2_page_dir;
+ /* TQM ring 3 page directory. */
+ uint64_t tqm_ring3_page_dir;
+ /* TQM ring 4 page directory. */
+ uint64_t tqm_ring4_page_dir;
+ /* TQM ring 5 page directory. */
+ uint64_t tqm_ring5_page_dir;
+ /* TQM ring 6 page directory. */
+ uint64_t tqm_ring6_page_dir;
+ /* TQM ring 7 page directory. */
+ uint64_t tqm_ring7_page_dir;
+ /*
+ * Number of TQM ring 0 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to delete the SCHQ and then reallocate it.
+ */
+ uint32_t tqm_ring0_num_entries;
+ /*
+ * Number of TQM ring 1 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to delete the SCHQ and then reallocate it.
+ */
+ uint32_t tqm_ring1_num_entries;
+ /*
+ * Number of TQM ring 2 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to delete the SCHQ and then reallocate it.
+ */
+ uint32_t tqm_ring2_num_entries;
+ /*
+ * Number of TQM ring 3 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to delete the SCHQ and then reallocate it.
+ */
+ uint32_t tqm_ring3_num_entries;
+ /*
+ * Number of TQM ring 4 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to delete the SCHQ and then reallocate it.
+ */
+ uint32_t tqm_ring4_num_entries;
+ /*
+ * Number of TQM ring 5 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to delete the SCHQ and then reallocate it.
+ */
+ uint32_t tqm_ring5_num_entries;
+ /*
+ * Number of TQM ring 6 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to delete the SCHQ and then reallocate it.
+ */
+ uint32_t tqm_ring6_num_entries;
+ /*
+ * Number of TQM ring 7 entries.
+ *
+ * TQM fastpath rings should be sized large enough to accommodate the
+ * maximum number of QPs (either L2 or RoCE, or both if shared)
+ * that can be enqueued to the TQM ring.
+ *
+ * Note that TQM ring sizes cannot be extended while the system is
+ * operational. If a PF driver needs to extend a TQM ring, it needs
+ * to delete the SCHQ and then reallocate it.
+ */
+ uint32_t tqm_ring7_num_entries;
+ /* Number of bytes that have been allocated for each context entry. */
+ uint16_t tqm_entry_size;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_ring_schq_alloc_output (size:128b/16B) */
+struct hwrm_ring_schq_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * This is an identifier for the SCHQ to be used in other HWRM commands
+ * that need to reference this SCHQ. This value is greater than zero
+ * (i.e. a schq_id of zero references the default SCHQ).
+ */
+ uint16_t schq_id;
+ uint8_t unused_0[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************
+ * hwrm_ring_schq_cfg *
+ **********************/
+
+
+/* hwrm_ring_schq_cfg_input (size:768b/96B) */
+struct hwrm_ring_schq_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Identifies the SCHQ being configured. A schq_id of zero refers to
+ * the default SCHQ.
+ */
+ uint16_t schq_id;
+ /*
+ * This field is an 8 bit bitmap that indicates which TCs are enabled
+ * in this SCHQ. Bit 0 represents traffic class 0 and bit 7 represents
+ * traffic class 7.
+ */
+ uint8_t tc_enabled;
+ uint8_t unused_0;
+ uint32_t flags;
+ /* The tc_max_bw array and the max_bw parameters are valid */
+ #define HWRM_RING_SCHQ_CFG_INPUT_FLAGS_TC_MAX_BW_ENABLED \
+ UINT32_C(0x1)
+ /* The tc_min_bw array is valid */
+ #define HWRM_RING_SCHQ_CFG_INPUT_FLAGS_TC_MIN_BW_ENABLED \
+ UINT32_C(0x2)
+ /* Maximum bandwidth of the traffic class, specified in Mbps. */
+ uint32_t max_bw_tc0;
+ /* Maximum bandwidth of the traffic class, specified in Mbps. */
+ uint32_t max_bw_tc1;
+ /* Maximum bandwidth of the traffic class, specified in Mbps. */
+ uint32_t max_bw_tc2;
+ /* Maximum bandwidth of the traffic class, specified in Mbps. */
+ uint32_t max_bw_tc3;
+ /* Maximum bandwidth of the traffic class, specified in Mbps. */
+ uint32_t max_bw_tc4;
+ /* Maximum bandwidth of the traffic class, specified in Mbps. */
+ uint32_t max_bw_tc5;
+ /* Maximum bandwidth of the traffic class, specified in Mbps. */
+ uint32_t max_bw_tc6;
+ /* Maximum bandwidth of the traffic class, specified in Mbps. */
+ uint32_t max_bw_tc7;
+ /*
+ * Bandwidth reservation for the traffic class, specified in Mbps.
+ * A value of zero signifies that traffic belonging to this class
+ * shares the bandwidth reservation for the same traffic class of
+ * the default SCHQ.
+ */
+ uint32_t min_bw_tc0;
+ /*
+ * Bandwidth reservation for the traffic class, specified in Mbps.
+ * A value of zero signifies that traffic belonging to this class
+ * shares the bandwidth reservation for the same traffic class of
+ * the default SCHQ.
+ */
+ uint32_t min_bw_tc1;
+ /*
+ * Bandwidth reservation for the traffic class, specified in Mbps.
+ * A value of zero signifies that traffic belonging to this class
+ * shares the bandwidth reservation for the same traffic class of
+ * the default SCHQ.
+ */
+ uint32_t min_bw_tc2;
+ /*
+ * Bandwidth reservation for the traffic class, specified in Mbps.
+ * A value of zero signifies that traffic belonging to this class
+ * shares the bandwidth reservation for the same traffic class of
+ * the default SCHQ.
+ */
+ uint32_t min_bw_tc3;
+ /*
+ * Bandwidth reservation for the traffic class, specified in Mbps.
+ * A value of zero signifies that traffic belonging to this class
+ * shares the bandwidth reservation for the same traffic class of
+ * the default SCHQ.
+ */
+ uint32_t min_bw_tc4;
+ /*
+ * Bandwidth reservation for the traffic class, specified in Mbps.
+ * A value of zero signifies that traffic belonging to this class
+ * shares the bandwidth reservation for the same traffic class of
+ * the default SCHQ.
+ */
+ uint32_t min_bw_tc5;
+ /*
+ * Bandwidth reservation for the traffic class, specified in Mbps.
+ * A value of zero signifies that traffic belonging to this class
+ * shares the bandwidth reservation for the same traffic class of
+ * the default SCHQ.
+ */
+ uint32_t min_bw_tc6;
+ /*
+ * Bandwidth reservation for the traffic class, specified in Mbps.
+ * A value of zero signifies that traffic belonging to this class
+ * shares the bandwidth reservation for the same traffic class of
+ * the default SCHQ.
+ */
+ uint32_t min_bw_tc7;
+ /*
+ * Indicates the max bandwidth for all enabled traffic classes in
+ * this SCHQ, specified in Mbps.
+ */
+ uint32_t max_bw;
+ uint8_t unused_1[4];
+} __rte_packed;
+
+/* hwrm_ring_schq_cfg_output (size:128b/16B) */
+struct hwrm_ring_schq_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***********************
+ * hwrm_ring_schq_free *
+ ***********************/
+
+
+/* hwrm_ring_schq_free_input (size:192b/24B) */
+struct hwrm_ring_schq_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Identifies the SCHQ being freed. */
+ uint16_t schq_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_ring_schq_free_output (size:128b/16B) */
+struct hwrm_ring_schq_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+/*
+ * special reserved flow ID to identify per function default
+ * flows for vSwitch offload
+ */
+#define DEFAULT_FLOW_ID 0xFFFFFFFFUL
+/*
+ * special reserved flow ID to identify per function RoCEv1
+ * flows
+ */
+#define ROCEV1_FLOW_ID 0xFFFFFFFEUL
+/*
+ * special reserved flow ID to identify per function RoCEv2
+ * flows
+ */
+#define ROCEV2_FLOW_ID 0xFFFFFFFDUL
+/*
+ * special reserved flow ID to identify per function RoCEv2
+ * CNP flows
+ */
+#define ROCEV2_CNP_FLOW_ID 0xFFFFFFFCUL
+
+/****************************
+ * hwrm_cfa_l2_filter_alloc *
+ ****************************/
+
+
+/* hwrm_cfa_l2_filter_alloc_input (size:768b/96B) */
+struct hwrm_cfa_l2_filter_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH \
+ UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_TX \
+ UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX \
+ UINT32_C(0x1)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX
+ /* Setting of this flag indicates the applicability to the loopback path. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \
+ UINT32_C(0x2)
+ /*
+ * Setting of this flag indicates drop action. If this flag is not set,
+ * then it should be considered accept action.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_DROP \
+ UINT32_C(0x4)
+ /*
+ * If this flag is set, all t_l2_* fields are invalid
+ * and they should not be specified.
+ * If this flag is set, then l2_* fields refer to
+ * fields of outermost L2 header.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST \
+ UINT32_C(0x8)
+ /*
+ * Enumeration denoting NO_ROCE_L2 to support old drivers.
+ * New driver L2 for only L2 traffic, ROCE for roce and l2 traffic
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_MASK \
+ UINT32_C(0x30)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_SFT 4
+ /* To support old drivers */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_NO_ROCE_L2 \
+ (UINT32_C(0x0) << 4)
+ /* Only L2 traffic */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_L2 \
+ (UINT32_C(0x1) << 4)
+ /* Roce & L2 traffic */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_ROCE \
+ (UINT32_C(0x2) << 4)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_LAST \
+ HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_ROCE
+ /*
+ * Setting of this flag indicates that no XDP filter is created with
+ * L2 filter.
+ * 0 - legacy behavior, XDP filter is created with L2 filter
+ * 1 - XDP filter won't be created with L2 filter
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_XDP_DISABLE \
+ UINT32_C(0x40)
+ /*
+ * Setting this flag to 1 indicate the L2 fields in this command
+ * pertain to source fields. Setting this flag to 0 indicate the
+ * L2 fields in this command pertain to the destination fields
+ * and this is the default/legacy behavior.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_SOURCE_VALID \
+ UINT32_C(0x80)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the l2_addr field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the l2_addr_mask field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the l2_ovlan field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the l2_ovlan_mask field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN_MASK \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the l2_ivlan field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the l2_ivlan_mask field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN_MASK \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the t_l2_addr field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the t_l2_addr_mask field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR_MASK \
+ UINT32_C(0x80)
+ /*
+ * This bit must be '1' for the t_l2_ovlan field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN \
+ UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the t_l2_ovlan_mask field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN_MASK \
+ UINT32_C(0x200)
+ /*
+ * This bit must be '1' for the t_l2_ivlan field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN \
+ UINT32_C(0x400)
+ /*
+ * This bit must be '1' for the t_l2_ivlan_mask field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN_MASK \
+ UINT32_C(0x800)
+ /*
+ * This bit must be '1' for the src_type field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_TYPE \
+ UINT32_C(0x1000)
+ /*
+ * This bit must be '1' for the src_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_ID \
+ UINT32_C(0x2000)
+ /*
+ * This bit must be '1' for the tunnel_type field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
+ UINT32_C(0x4000)
+ /*
+ * This bit must be '1' for the dst_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID \
+ UINT32_C(0x8000)
+ /*
+ * This bit must be '1' for the mirror_vnic_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
+ UINT32_C(0x10000)
+ /*
+ * This bit must be '1' for the num_vlans field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_NUM_VLANS \
+ UINT32_C(0x20000)
+ /*
+ * This bit must be '1' for the t_num_vlans field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_NUM_VLANS \
+ UINT32_C(0x40000)
+ /*
+ * This value sets the match value for the L2 MAC address.
+ * Destination MAC address for RX path.
+ * Source MAC address for TX path.
+ */
+ uint8_t l2_addr[6];
+ /* This value sets the match value for the number of VLANs. */
+ uint8_t num_vlans;
+ /*
+ * This value sets the match value for the number of VLANs
+ * in the tunnel headers.
+ */
+ uint8_t t_num_vlans;
+ /*
+ * This value sets the mask value for the L2 address.
+ * A value of 0 will mask the corresponding bit from
+ * compare.
+ */
+ uint8_t l2_addr_mask[6];
+ /* This value sets VLAN ID value for outer VLAN. */
+ uint16_t l2_ovlan;
+ /*
+ * This value sets the mask value for the ovlan id.
+ * A value of 0 will mask the corresponding bit from
+ * compare.
+ */
+ uint16_t l2_ovlan_mask;
+ /* This value sets VLAN ID value for inner VLAN. */
+ uint16_t l2_ivlan;
+ /*
+ * This value sets the mask value for the ivlan id.
+ * A value of 0 will mask the corresponding bit from
+ * compare.
+ */
+ uint16_t l2_ivlan_mask;
+ uint8_t unused_1[2];
+ /*
+ * This value sets the match value for the tunnel
+ * L2 MAC address.
+ * Destination MAC address for RX path.
+ * Source MAC address for TX path.
+ */
+ uint8_t t_l2_addr[6];
+ uint8_t unused_2[2];
+ /*
+ * This value sets the mask value for the tunnel L2
+ * address.
+ * A value of 0 will mask the corresponding bit from
+ * compare.
+ */
+ uint8_t t_l2_addr_mask[6];
+ /* This value sets VLAN ID value for tunnel outer VLAN. */
+ uint16_t t_l2_ovlan;
+ /*
+ * This value sets the mask value for the tunnel ovlan id.
+ * A value of 0 will mask the corresponding bit from
+ * compare.
+ */
+ uint16_t t_l2_ovlan_mask;
+ /* This value sets VLAN ID value for tunnel inner VLAN. */
+ uint16_t t_l2_ivlan;
+ /*
+ * This value sets the mask value for the tunnel ivlan id.
+ * A value of 0 will mask the corresponding bit from
+ * compare.
+ */
+ uint16_t t_l2_ivlan_mask;
+ /* This value identifies the type of source of the packet. */
+ uint8_t src_type;
+ /* Network port */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_NPORT UINT32_C(0x0)
+ /* Physical function */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_PF UINT32_C(0x1)
+ /* Virtual function */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VF UINT32_C(0x2)
+ /* Virtual NIC of a function */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VNIC UINT32_C(0x3)
+ /* Embedded processor for CFA management */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_KONG UINT32_C(0x4)
+ /* Embedded processor for OOB management */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_APE UINT32_C(0x5)
+ /* Embedded processor for RoCE */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_BONO UINT32_C(0x6)
+ /* Embedded processor for network proxy functions */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG UINT32_C(0x7)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_LAST \
+ HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG
+ uint8_t unused_3;
+ /*
+ * This value is the id of the source.
+ * For a network port, it represents port_id.
+ * For a physical function, it represents fid.
+ * For a virtual function, it represents vf_id.
+ * For a vnic, it represents vnic_id.
+ * For embedded processors, this id is not valid.
+ *
+ * Notes:
+ * 1. The function ID is implied if it src_id is
+ * not provided for a src_type that is either
+ */
+ uint32_t src_id;
+ /* Tunnel Type. */
+ uint8_t tunnel_type;
+ /* Non-tunnel */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
+ UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
+ UINT32_C(0x1)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
+ UINT32_C(0x2)
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
+ UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
+ UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
+ UINT32_C(0x5)
+ /* Multi-Protocol Label Switching (MPLS) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
+ UINT32_C(0x6)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \
+ UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
+ UINT32_C(0x8)
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ UINT32_C(0x9)
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
+ UINT32_C(0xa)
+ /* Use fixed layer 2 ether type of 0xFFFF */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
+ UINT32_C(0xb)
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
+ UINT32_C(0xc)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
+ UINT32_C(0xff)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \
+ HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
+ uint8_t unused_4;
+ /*
+ * If set, this value shall represent the
+ * Logical VNIC ID of the destination VNIC for the RX
+ * path and network port id of the destination port for
+ * the TX path.
+ */
+ uint16_t dst_id;
+ /*
+ * Logical VNIC ID of the VNIC where traffic is
+ * mirrored.
+ */
+ uint16_t mirror_vnic_id;
+ /*
+ * This hint is provided to help in placing
+ * the filter in the filter table.
+ */
+ uint8_t pri_hint;
+ /* No preference */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \
+ UINT32_C(0x0)
+ /* Above the given filter */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE_FILTER \
+ UINT32_C(0x1)
+ /* Below the given filter */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_BELOW_FILTER \
+ UINT32_C(0x2)
+ /* As high as possible */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MAX \
+ UINT32_C(0x3)
+ /* As low as possible */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN \
+ UINT32_C(0x4)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_LAST \
+ HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN
+ uint8_t unused_5;
+ uint32_t unused_6;
+ /*
+ * This is the ID of the filter that goes along with
+ * the pri_hint.
+ *
+ * This field is valid only for the following values.
+ * 1 - Above the given filter
+ * 2 - Below the given filter
+ */
+ uint64_t l2_filter_id_hint;
+} __rte_packed;
+
+/* hwrm_cfa_l2_filter_alloc_output (size:192b/24B) */
+struct hwrm_cfa_l2_filter_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * This value identifies a set of CFA data structures used for an L2
+ * context.
+ */
+ uint64_t l2_filter_id;
+ /*
+ * The flow id value in bit 0-29 is the actual ID of the flow
+ * associated with this filter and it shall be used to match
+ * and associate the flow identifier returned in completion
+ * records. A value of 0xFFFFFFFF in the 32-bit flow_id field
+ * shall indicate no valid flow id.
+ */
+ uint32_t flow_id;
+ /* Indicate the flow id value. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_MASK \
+ UINT32_C(0x3fffffff)
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_SFT 0
+ /* Indicate type of the flow. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE \
+ UINT32_C(0x40000000)
+ /*
+ * If this bit set to 0, then it indicates that the flow is
+ * internal flow.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_INT \
+ (UINT32_C(0x0) << 30)
+ /*
+ * If this bit is set to 1, then it indicates that the flow is
+ * external flow.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT \
+ (UINT32_C(0x1) << 30)
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_LAST \
+ HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT
+ /* Indicate the flow direction. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR \
+ UINT32_C(0x80000000)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_RX \
+ (UINT32_C(0x0) << 31)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX \
+ (UINT32_C(0x1) << 31)
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_LAST \
+ HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***************************
+ * hwrm_cfa_l2_filter_free *
+ ***************************/
+
+
+/* hwrm_cfa_l2_filter_free_input (size:192b/24B) */
+struct hwrm_cfa_l2_filter_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * This value identifies a set of CFA data structures used for an L2
+ * context.
+ */
+ uint64_t l2_filter_id;
+} __rte_packed;
+
+/* hwrm_cfa_l2_filter_free_output (size:128b/16B) */
+struct hwrm_cfa_l2_filter_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**************************
+ * hwrm_cfa_l2_filter_cfg *
+ **************************/
+
+
+/* hwrm_cfa_l2_filter_cfg_input (size:320b/40B) */
+struct hwrm_cfa_l2_filter_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH \
+ UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_TX \
+ UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX \
+ UINT32_C(0x1)
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX
+ /*
+ * Setting of this flag indicates drop action. If this flag is not set,
+ * then it should be considered accept action.
+ */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_DROP \
+ UINT32_C(0x2)
+ /*
+ * Enumeration denoting NO_ROCE_L2 to support old drivers.
+ * New driver L2 for only L2 traffic, ROCE for roce and l2 traffic
+ */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_MASK \
+ UINT32_C(0xc)
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_SFT 2
+ /* To support old drivers */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_NO_ROCE_L2 \
+ (UINT32_C(0x0) << 2)
+ /* Only L2 traffic */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_L2 \
+ (UINT32_C(0x1) << 2)
+ /* Roce & L2 traffic */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_ROCE \
+ (UINT32_C(0x2) << 2)
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_LAST \
+ HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_ROCE
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the dst_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_DST_ID \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the new_mirror_vnic_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \
+ UINT32_C(0x2)
+ /*
+ * This value identifies a set of CFA data structures used for an L2
+ * context.
+ */
+ uint64_t l2_filter_id;
+ /*
+ * If set, this value shall represent the
+ * Logical VNIC ID of the destination VNIC for the RX
+ * path and network port id of the destination port for
+ * the TX path.
+ */
+ uint32_t dst_id;
+ /*
+ * New Logical VNIC ID of the VNIC where traffic is
+ * mirrored.
+ */
+ uint32_t new_mirror_vnic_id;
+} __rte_packed;
+
+/* hwrm_cfa_l2_filter_cfg_output (size:128b/16B) */
+struct hwrm_cfa_l2_filter_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***************************
+ * hwrm_cfa_l2_set_rx_mask *
+ ***************************/
+
+
+/* hwrm_cfa_l2_set_rx_mask_input (size:448b/56B) */
+struct hwrm_cfa_l2_set_rx_mask_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* VNIC ID */
+ uint32_t vnic_id;
+ uint32_t mask;
+ /*
+ * When this bit is '1', the function is requested to accept
+ * multi-cast packets specified by the multicast addr table.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_MCAST \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', the function is requested to accept
+ * all multi-cast packets.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', the function is requested to accept
+ * broadcast packets.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_BCAST \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', the function is requested to be
+ * put in the promiscuous mode.
+ *
+ * The HWRM should accept any function to set up
+ * promiscuous mode.
+ *
+ * The HWRM shall follow the semantics below for the
+ * promiscuous mode support.
+ * # When partitioning is not enabled on a port
+ * (i.e. single PF on the port), then the PF shall
+ * be allowed to be in the promiscuous mode. When the
+ * PF is in the promiscuous mode, then it shall
+ * receive all host bound traffic on that port.
+ * # When partitioning is enabled on a port
+ * (i.e. multiple PFs per port) and a PF on that
+ * port is in the promiscuous mode, then the PF
+ * receives all traffic within that partition as
+ * identified by a unique identifier for the
+ * PF (e.g. S-Tag). If a unique outer VLAN
+ * for the PF is specified, then the setting of
+ * promiscuous mode on that PF shall result in the
+ * PF receiving all host bound traffic with matching
+ * outer VLAN.
+ * # A VF shall can be set in the promiscuous mode.
+ * In the promiscuous mode, the VF does not receive any
+ * traffic unless a unique outer VLAN for the
+ * VF is specified. If a unique outer VLAN
+ * for the VF is specified, then the setting of
+ * promiscuous mode on that VF shall result in the
+ * VF receiving all host bound traffic with the
+ * matching outer VLAN.
+ * # The HWRM shall allow the setting of promiscuous
+ * mode on a function independently from the
+ * promiscuous mode settings on other functions.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS \
+ UINT32_C(0x10)
+ /*
+ * If this flag is set, the corresponding RX
+ * filters shall be set up to cover multicast/broadcast
+ * filters for the outermost Layer 2 destination MAC
+ * address field.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_OUTERMOST \
+ UINT32_C(0x20)
+ /*
+ * If this flag is set, the corresponding RX
+ * filters shall be set up to cover multicast/broadcast
+ * filters for the VLAN-tagged packets that match the
+ * TPID and VID fields of VLAN tags in the VLAN tag
+ * table specified in this command.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLANONLY \
+ UINT32_C(0x40)
+ /*
+ * If this flag is set, the corresponding RX
+ * filters shall be set up to cover multicast/broadcast
+ * filters for non-VLAN tagged packets and VLAN-tagged
+ * packets that match the TPID and VID fields of VLAN
+ * tags in the VLAN tag table specified in this command.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLAN_NONVLAN \
+ UINT32_C(0x80)
+ /*
+ * If this flag is set, the corresponding RX
+ * filters shall be set up to cover multicast/broadcast
+ * filters for non-VLAN tagged packets and VLAN-tagged
+ * packets matching any VLAN tag.
+ *
+ * If this flag is set, then the HWRM shall ignore
+ * VLAN tags specified in vlan_tag_tbl.
+ *
+ * If none of vlanonly, vlan_nonvlan, and anyvlan_nonvlan
+ * flags is set, then the HWRM shall ignore
+ * VLAN tags specified in vlan_tag_tbl.
+ *
+ * The HWRM client shall set at most one flag out of
+ * vlanonly, vlan_nonvlan, and anyvlan_nonvlan.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ANYVLAN_NONVLAN \
+ UINT32_C(0x100)
+ /* This is the address for mcast address tbl. */
+ uint64_t mc_tbl_addr;
+ /*
+ * This value indicates how many entries in mc_tbl are valid.
+ * Each entry is 6 bytes.
+ */
+ uint32_t num_mc_entries;
+ uint8_t unused_0[4];
+ /*
+ * This is the address for VLAN tag table.
+ * Each VLAN entry in the table is 4 bytes of a VLAN tag
+ * including TPID, PCP, DEI, and VID fields in network byte
+ * order.
+ */
+ uint64_t vlan_tag_tbl_addr;
+ /*
+ * This value indicates how many entries in vlan_tag_tbl are
+ * valid. Each entry is 4 bytes.
+ */
+ uint32_t num_vlan_tags;
+ uint8_t unused_1[4];
+} __rte_packed;
+
+/* hwrm_cfa_l2_set_rx_mask_output (size:128b/16B) */
+struct hwrm_cfa_l2_set_rx_mask_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/* hwrm_cfa_l2_set_rx_mask_cmd_err (size:64b/8B) */
+struct hwrm_cfa_l2_set_rx_mask_cmd_err {
+ /*
+ * command specific error codes that goes to
+ * the cmd_err field in Common HWRM Error Response.
+ */
+ uint8_t code;
+ /* Unknown error */
+ #define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_UNKNOWN \
+ UINT32_C(0x0)
+ /* Unable to complete operation due to conflict with Ntuple Filter */
+ #define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_NTUPLE_FILTER_CONFLICT_ERR \
+ UINT32_C(0x1)
+ #define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_LAST \
+ HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_NTUPLE_FILTER_CONFLICT_ERR
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/*******************************
+ * hwrm_cfa_vlan_antispoof_cfg *
+ *******************************/
+
+
+/* hwrm_cfa_vlan_antispoof_cfg_input (size:256b/32B) */
+struct hwrm_cfa_vlan_antispoof_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Function ID of the function that is being configured.
+ * Only valid for a VF FID configured by the PF.
+ */
+ uint16_t fid;
+ uint8_t unused_0[2];
+ /* Number of VLAN entries in the vlan_tag_mask_tbl. */
+ uint32_t num_vlan_entries;
+ /*
+ * The vlan_tag_mask_tbl_addr is the DMA address of the VLAN
+ * antispoof table. Each table entry contains the 16-bit TPID
+ * (0x8100 or 0x88a8 only), 16-bit VLAN ID, and a 16-bit mask,
+ * all in network order to match hwrm_cfa_l2_set_rx_mask.
+ * For an individual VLAN entry, the mask value should be 0xfff
+ * for the 12-bit VLAN ID.
+ */
+ uint64_t vlan_tag_mask_tbl_addr;
+} __rte_packed;
+
+/* hwrm_cfa_vlan_antispoof_cfg_output (size:128b/16B) */
+struct hwrm_cfa_vlan_antispoof_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/********************************
+ * hwrm_cfa_vlan_antispoof_qcfg *
+ ********************************/
+
+
+/* hwrm_cfa_vlan_antispoof_qcfg_input (size:256b/32B) */
+struct hwrm_cfa_vlan_antispoof_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Function ID of the function that is being queried.
+ * Only valid for a VF FID queried by the PF.
+ */
+ uint16_t fid;
+ uint8_t unused_0[2];
+ /*
+ * Maximum number of VLAN entries the firmware is allowed to DMA
+ * to vlan_tag_mask_tbl.
+ */
+ uint32_t max_vlan_entries;
+ /*
+ * The vlan_tag_mask_tbl_addr is the DMA address of the VLAN
+ * antispoof table to which firmware will DMA to. Each table
+ * entry will contain the 16-bit TPID (0x8100 or 0x88a8 only),
+ * 16-bit VLAN ID, and a 16-bit mask, all in network order to
+ * match hwrm_cfa_l2_set_rx_mask. For an individual VLAN entry,
+ * the mask value should be 0xfff for the 12-bit VLAN ID.
+ */
+ uint64_t vlan_tag_mask_tbl_addr;
+} __rte_packed;
+
+/* hwrm_cfa_vlan_antispoof_qcfg_output (size:128b/16B) */
+struct hwrm_cfa_vlan_antispoof_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Number of valid entries DMAd by firmware to vlan_tag_mask_tbl. */
+ uint32_t num_vlan_entries;
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/********************************
+ * hwrm_cfa_tunnel_filter_alloc *
+ ********************************/
+