+ /* Module status is not applicable. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTAPPLICABLE \
+ UINT32_C(0xff)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTAPPLICABLE
+ /* Current setting for preemphasis. */
+ uint32_t preemphasis;
+ /* This field represents the major version of the PHY. */
+ uint8_t phy_maj;
+ /* This field represents the minor version of the PHY. */
+ uint8_t phy_min;
+ /* This field represents the build version of the PHY. */
+ uint8_t phy_bld;
+ /* This value represents a PHY type. */
+ uint8_t phy_type;
+ /* Unknown */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_UNKNOWN \
+ UINT32_C(0x0)
+ /* BASE-CR */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASECR \
+ UINT32_C(0x1)
+ /* BASE-KR4 (Deprecated) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR4 \
+ UINT32_C(0x2)
+ /* BASE-LR */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASELR \
+ UINT32_C(0x3)
+ /* BASE-SR */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASESR \
+ UINT32_C(0x4)
+ /* BASE-KR2 (Deprecated) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR2 \
+ UINT32_C(0x5)
+ /* BASE-KX */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKX \
+ UINT32_C(0x6)
+ /* BASE-KR */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR \
+ UINT32_C(0x7)
+ /* BASE-T */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASET \
+ UINT32_C(0x8)
+ /* EEE capable BASE-T */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASETE \
+ UINT32_C(0x9)
+ /* SGMII connected external PHY */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_SGMIIEXTPHY \
+ UINT32_C(0xa)
+ /* 25G_BASECR_CA_L */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_L \
+ UINT32_C(0xb)
+ /* 25G_BASECR_CA_S */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_S \
+ UINT32_C(0xc)
+ /* 25G_BASECR_CA_N */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_N \
+ UINT32_C(0xd)
+ /* 25G_BASESR */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASESR \
+ UINT32_C(0xe)
+ /* 100G_BASECR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASECR4 \
+ UINT32_C(0xf)
+ /* 100G_BASESR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASESR4 \
+ UINT32_C(0x10)
+ /* 100G_BASELR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASELR4 \
+ UINT32_C(0x11)
+ /* 100G_BASEER4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASEER4 \
+ UINT32_C(0x12)
+ /* 100G_BASESR10 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASESR10 \
+ UINT32_C(0x13)
+ /* 40G_BASECR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASECR4 \
+ UINT32_C(0x14)
+ /* 40G_BASESR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASESR4 \
+ UINT32_C(0x15)
+ /* 40G_BASELR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASELR4 \
+ UINT32_C(0x16)
+ /* 40G_BASEER4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASEER4 \
+ UINT32_C(0x17)
+ /* 40G_ACTIVE_CABLE */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_ACTIVE_CABLE \
+ UINT32_C(0x18)
+ /* 1G_baseT */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASET \
+ UINT32_C(0x19)
+ /* 1G_baseSX */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASESX \
+ UINT32_C(0x1a)
+ /* 1G_baseCX */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASECX \
+ UINT32_C(0x1b)
+ /* 100G_BASECR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_200G_BASECR4 \
+ UINT32_C(0x1c)
+ /* 100G_BASESR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_200G_BASESR4 \
+ UINT32_C(0x1d)
+ /* 100G_BASELR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_200G_BASELR4 \
+ UINT32_C(0x1e)
+ /* 100G_BASEER4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_200G_BASEER4 \
+ UINT32_C(0x1f)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_200G_BASEER4
+ /* This value represents a media type. */
+ uint8_t media_type;
+ /* Unknown */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_UNKNOWN UINT32_C(0x0)
+ /* Twisted Pair */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_TP UINT32_C(0x1)
+ /* Direct Attached Copper */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_DAC UINT32_C(0x2)
+ /* Fiber */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_FIBRE UINT32_C(0x3)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_FIBRE
+ /* This value represents a transceiver type. */
+ uint8_t xcvr_pkg_type;
+ /* PHY and MAC are in the same package */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_INTERNAL \
+ UINT32_C(0x1)
+ /* PHY and MAC are in different packages */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_EXTERNAL \
+ UINT32_C(0x2)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_EXTERNAL
+ uint8_t eee_config_phy_addr;
+ /* This field represents PHY address. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_MASK \
+ UINT32_C(0x1f)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_SFT 0
+ /*
+ * This field represents flags related to EEE configuration.
+ * These EEE configuration flags are valid only when the
+ * auto_mode is not set to none (in other words autonegotiation
+ * is enabled).
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_MASK \
+ UINT32_C(0xe0)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_SFT 5
+ /*
+ * When set to 1, Energy Efficient Ethernet (EEE) mode is enabled.
+ * Speeds for autoneg with EEE mode enabled
+ * are based on eee_link_speed_mask.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ENABLED \
+ UINT32_C(0x20)
+ /*
+ * This flag is valid only when eee_enabled is set to 1.
+ *
+ * # If eee_enabled is set to 0, then EEE mode is disabled
+ * and this flag shall be ignored.
+ * # If eee_enabled is set to 1 and this flag is set to 1,
+ * then Energy Efficient Ethernet (EEE) mode is enabled
+ * and in use.
+ * # If eee_enabled is set to 1 and this flag is set to 0,
+ * then Energy Efficient Ethernet (EEE) mode is enabled
+ * but is currently not in use.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ACTIVE \
+ UINT32_C(0x40)
+ /*
+ * This flag is valid only when eee_enabled is set to 1.
+ *
+ * # If eee_enabled is set to 0, then EEE mode is disabled
+ * and this flag shall be ignored.
+ * # If eee_enabled is set to 1 and this flag is set to 1,
+ * then Energy Efficient Ethernet (EEE) mode is enabled
+ * and TX LPI is enabled.
+ * # If eee_enabled is set to 1 and this flag is set to 0,
+ * then Energy Efficient Ethernet (EEE) mode is enabled
+ * but TX LPI is disabled.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_TX_LPI \
+ UINT32_C(0x80)
+ /*
+ * When set to 1, the parallel detection is used to determine
+ * the speed of the link partner.
+ *
+ * Parallel detection is used when a autonegotiation capable
+ * device is connected to a link parter that is not capable
+ * of autonegotiation.
+ */
+ uint8_t parallel_detect;
+ /*
+ * When set to 1, the parallel detection is used to determine
+ * the speed of the link partner.
+ *
+ * Parallel detection is used when a autonegotiation capable
+ * device is connected to a link parter that is not capable
+ * of autonegotiation.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PARALLEL_DETECT UINT32_C(0x1)
+ /*
+ * The advertised speeds for the port by the link partner.
+ * Each advertised speed will be set to '1'.
+ */
+ uint16_t link_partner_adv_speeds;
+ /* 100Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MBHD \
+ UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MB \
+ UINT32_C(0x2)
+ /* 1Gb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GBHD \
+ UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GB \
+ UINT32_C(0x8)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_2GB \
+ UINT32_C(0x10)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_2_5GB \
+ UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10GB \
+ UINT32_C(0x40)
+ /* 20Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_20GB \
+ UINT32_C(0x80)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_25GB \
+ UINT32_C(0x100)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_40GB \
+ UINT32_C(0x200)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_50GB \
+ UINT32_C(0x400)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100GB \
+ UINT32_C(0x800)
+ /* 10Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MBHD \
+ UINT32_C(0x1000)
+ /* 10Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MB \
+ UINT32_C(0x2000)
+ /*
+ * The advertised autoneg for the port by the link partner.
+ * This field is deprecated and should be set to 0.
+ */
+ uint8_t link_partner_adv_auto_mode;
+ /* Disable autoneg or autoneg disabled. No speeds are selected. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_NONE \
+ UINT32_C(0x0)
+ /* Select all possible speeds for autoneg mode. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ALL_SPEEDS \
+ UINT32_C(0x1)
+ /*
+ * Select only the auto_link_speed speed for autoneg mode. This mode has
+ * been DEPRECATED. An HWRM client should not use this mode.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_SPEED \
+ UINT32_C(0x2)
+ /*
+ * Select the auto_link_speed or any speed below that speed for autoneg.
+ * This mode has been DEPRECATED. An HWRM client should not use this mode.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_OR_BELOW \
+ UINT32_C(0x3)
+ /*
+ * Select the speeds based on the corresponding link speed mask value
+ * that is provided.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_SPEED_MASK \
+ UINT32_C(0x4)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_SPEED_MASK
+ /* The advertised pause settings on the port by the link partner. */
+ uint8_t link_partner_adv_pause;
+ /*
+ * When this bit is '1', Generation of tx pause messages
+ * is supported. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_PAUSE_TX \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', Reception of rx pause messages
+ * is supported. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_PAUSE_RX \
+ UINT32_C(0x2)
+ /*
+ * Current setting for link speed mask that is used to
+ * advertise speeds during autonegotiation when EEE is enabled.
+ * This field is valid only when eee_enabled flags is set to 1.
+ * The speeds specified in this field shall be a subset of
+ * speeds specified in auto_link_speed_mask.
+ */
+ uint16_t adv_eee_link_speed_mask;
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD1 \
+ UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_100MB \
+ UINT32_C(0x2)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD2 \
+ UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_1GB \
+ UINT32_C(0x8)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD3 \
+ UINT32_C(0x10)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD4 \
+ UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_10GB \
+ UINT32_C(0x40)
+ /*
+ * Current setting for link speed mask that is advertised by
+ * the link partner when EEE is enabled.
+ * This field is valid only when eee_enabled flags is set to 1.
+ */
+ uint16_t link_partner_adv_eee_link_speed_mask;
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD1 \
+ UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_100MB \
+ UINT32_C(0x2)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD2 \
+ UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_1GB \
+ UINT32_C(0x8)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD3 \
+ UINT32_C(0x10)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD4 \
+ UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_10GB \
+ UINT32_C(0x40)
+ uint32_t xcvr_identifier_type_tx_lpi_timer;
+ /*
+ * Current setting of TX LPI timer in microseconds.
+ * This field is valid only when_eee_enabled flag is set to 1
+ * and tx_lpi_enabled is set to 1.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_MASK \
+ UINT32_C(0xffffff)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_SFT 0
+ /* This value represents transceiver identifier type. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_MASK \
+ UINT32_C(0xff000000)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFT 24
+ /* Unknown */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_UNKNOWN \
+ (UINT32_C(0x0) << 24)
+ /* SFP/SFP+/SFP28 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFP \
+ (UINT32_C(0x3) << 24)
+ /* QSFP+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP \
+ (UINT32_C(0xc) << 24)
+ /* QSFP+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFPPLUS \
+ (UINT32_C(0xd) << 24)
+ /* QSFP28 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP28 \
+ (UINT32_C(0x11) << 24)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP28
+ /*
+ * This value represents the current configuration of
+ * Forward Error Correction (FEC) on the port.
+ */
+ uint16_t fec_cfg;
+ /*
+ * When set to 1, then FEC is not supported on this port. If this flag
+ * is set to 1, then all other FEC configuration flags shall be ignored.
+ * When set to 0, then FEC is supported as indicated by other
+ * configuration flags.
+ * If no cable is attached and the HWRM does not yet know the FEC
+ * capability, then the HWRM shall set this flag to 1 when reporting
+ * FEC capability.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_NONE_SUPPORTED \
+ UINT32_C(0x1)
+ /*
+ * When set to 1, then FEC autonegotiation is supported on this port.
+ * When set to 0, then FEC autonegotiation is not supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * When set to 1, then FEC autonegotiation is enabled on this port.
+ * When set to 0, then FEC autonegotiation is disabled if supported.
+ * This flag should be ignored if FEC autonegotiation is not supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_ENABLED \
+ UINT32_C(0x4)
+ /*
+ * When set to 1, then FEC CLAUSE 74 (Fire Code) is supported on this port.
+ * When set to 0, then FEC CLAUSE 74 (Fire Code) is not supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * When set to 1, then FEC CLAUSE 74 (Fire Code) is enabled on this port.
+ * When set to 0, then FEC CLAUSE 74 (Fire Code) is disabled if supported.
+ * This flag should be ignored if FEC CLAUSE 74 is not supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_ENABLED \
+ UINT32_C(0x10)
+ /*
+ * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is supported on this port.
+ * When set to 0, then FEC CLAUSE 91 (Reed Solomon) is not supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_SUPPORTED \
+ UINT32_C(0x20)
+ /*
+ * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is enabled on this port.
+ * When set to 0, then FEC CLAUSE 91 (Reed Solomon) is disabled if supported.
+ * This flag should be ignored if FEC CLAUSE 91 is not supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_ENABLED \
+ UINT32_C(0x40)
+ /*
+ * This value is indicates the duplex of the current
+ * connection state.
+ */
+ uint8_t duplex_state;
+ /* Half Duplex connection. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_HALF UINT32_C(0x0)
+ /* Full duplex connection. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_FULL UINT32_C(0x1)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_FULL
+ /* Option flags fields. */
+ uint8_t option_flags;
+ /* When this bit is '1', Media auto detect is enabled. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_OPTION_FLAGS_MEDIA_AUTO_DETECT \
+ UINT32_C(0x1)
+ /*
+ * Up to 16 bytes of null padded ASCII string representing
+ * PHY vendor.
+ * If the string is set to null, then the vendor name is not
+ * available.
+ */
+ char phy_vendor_name[16];
+ /*
+ * Up to 16 bytes of null padded ASCII string that
+ * identifies vendor specific part number of the PHY.
+ * If the string is set to null, then the vendor specific
+ * part number is not available.
+ */
+ char phy_vendor_partnumber[16];
+ uint8_t unused_2[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*********************
+ * hwrm_port_mac_cfg *
+ *********************/
+
+
+/* hwrm_port_mac_cfg_input (size:384b/48B) */
+struct hwrm_port_mac_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * In this field, there are a number of CoS mappings related flags
+ * that are used to configure CoS mappings and their corresponding
+ * priorities in the hardware.
+ * For the priorities of CoS mappings, the HWRM uses the following
+ * priority order (high to low) by default:
+ * # vlan pri
+ * # ip_dscp
+ * # tunnel_vlan_pri
+ * # default cos
+ *
+ * A subset of CoS mappings can be enabled.
+ * If a priority is not specified for an enabled CoS mapping, the
+ * priority will be assigned in the above order for the enabled CoS
+ * mappings. For example, if vlan_pri and ip_dscp CoS mappings are
+ * enabled and their priorities are not specified, the following
+ * priority order (high to low) will be used by the HWRM:
+ * # vlan_pri
+ * # ip_dscp
+ * # default cos
+ *
+ * vlan_pri CoS mapping together with default CoS with lower priority
+ * are enabled by default by the HWRM.
+ */
+ uint32_t flags;
+ /*
+ * When this bit is '1', this command will configure
+ * the MAC to match the current link state of the PHY.
+ * If the link is not established on the PHY, then this
+ * bit has no effect.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_MATCH_LINK \
+ UINT32_C(0x1)
+ /*
+ * When this bit is set to '1', the inner VLAN PRI to CoS mapping
+ * is requested to be enabled.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_VLAN_PRI2COS_ENABLE \
+ UINT32_C(0x2)
+ /*
+ * When this bit is set to '1', tunnel VLAN PRI field to
+ * CoS mapping is requested to be enabled.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_TUNNEL_PRI2COS_ENABLE \
+ UINT32_C(0x4)
+ /*
+ * When this bit is set to '1', the IP DSCP to CoS mapping is
+ * requested to be enabled.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_IP_DSCP2COS_ENABLE \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', the HWRM is requested to
+ * enable timestamp capture capability on the receive side
+ * of this port.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_RX_TS_CAPTURE_ENABLE \
+ UINT32_C(0x10)
+ /*
+ * When this bit is '1', the HWRM is requested to
+ * disable timestamp capture capability on the receive side
+ * of this port.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_RX_TS_CAPTURE_DISABLE \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1', the HWRM is requested to
+ * enable timestamp capture capability on the transmit side
+ * of this port.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_TX_TS_CAPTURE_ENABLE \
+ UINT32_C(0x40)
+ /*
+ * When this bit is '1', the HWRM is requested to
+ * disable timestamp capture capability on the transmit side
+ * of this port.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_TX_TS_CAPTURE_DISABLE \
+ UINT32_C(0x80)
+ /*
+ * When this bit is '1', the Out-Of-Box WoL is requested to
+ * be enabled on this port.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_OOB_WOL_ENABLE \
+ UINT32_C(0x100)
+ /*
+ * When this bit is '1', the Out-Of-Box WoL is requested to
+ * be disabled on this port.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_OOB_WOL_DISABLE \
+ UINT32_C(0x200)
+ /*
+ * When this bit is set to '1', the inner VLAN PRI to CoS mapping
+ * is requested to be disabled.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_VLAN_PRI2COS_DISABLE \
+ UINT32_C(0x400)
+ /*
+ * When this bit is set to '1', tunnel VLAN PRI field to
+ * CoS mapping is requested to be disabled.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_TUNNEL_PRI2COS_DISABLE \
+ UINT32_C(0x800)
+ /*
+ * When this bit is set to '1', the IP DSCP to CoS mapping is
+ * requested to be disabled.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_IP_DSCP2COS_DISABLE \
+ UINT32_C(0x1000)
+ /*
+ * When this bit is set to '1', and the ptp_tx_ts_capture_enable
+ * bit is set, then the device uses one step Tx timestamping.
+ * This bit is temporary and used for experimental purposes.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_ONE_STEP_TX_TS \
+ UINT32_C(0x2000)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the ipg field to be
+ * configured.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_IPG \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the lpbk field to be
+ * configured.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_LPBK \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the vlan_pri2cos_map_pri field to be
+ * configured.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_VLAN_PRI2COS_MAP_PRI \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the tunnel_pri2cos_map_pri field to be
+ * configured.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_TUNNEL_PRI2COS_MAP_PRI \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the dscp2cos_map_pri field to be
+ * configured.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_DSCP2COS_MAP_PRI \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the rx_ts_capture_ptp_msg_type field to be
+ * configured.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_RX_TS_CAPTURE_PTP_MSG_TYPE \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the tx_ts_capture_ptp_msg_type field to be
+ * configured.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_TX_TS_CAPTURE_PTP_MSG_TYPE \
+ UINT32_C(0x80)
+ /*
+ * This bit must be '1' for the cos_field_cfg field to be
+ * configured.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_COS_FIELD_CFG \
+ UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the ptp_freq_adj_ppb field to be
+ * configured.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_PTP_FREQ_ADJ_PPB \
+ UINT32_C(0x200)
+ /* Port ID of port that is to be configured. */
+ uint16_t port_id;
+ /*
+ * This value is used to configure the minimum IPG that will
+ * be sent between packets by this port.
+ */
+ uint8_t ipg;
+ /* This value controls the loopback setting for the MAC. */
+ uint8_t lpbk;
+ /* No loopback is selected. Normal operation. */
+ #define HWRM_PORT_MAC_CFG_INPUT_LPBK_NONE UINT32_C(0x0)
+ /*
+ * The HW will be configured with local loopback such that
+ * host data is sent back to the host without modification.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_LPBK_LOCAL UINT32_C(0x1)
+ /*
+ * The HW will be configured with remote loopback such that
+ * port logic will send packets back out the transmitter that
+ * are received.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_LPBK_REMOTE UINT32_C(0x2)
+ #define HWRM_PORT_MAC_CFG_INPUT_LPBK_LAST \
+ HWRM_PORT_MAC_CFG_INPUT_LPBK_REMOTE
+ /*
+ * This value controls the priority setting of VLAN PRI to CoS
+ * mapping based on VLAN Tags of inner packet headers of
+ * tunneled packets or packet headers of non-tunneled packets.
+ *
+ * # Each XXX_pri variable shall have a unique priority value
+ * when it is being specified.
+ * # When comparing priorities of mappings, higher value
+ * indicates higher priority.
+ * For example, a value of 0-3 is returned where 0 is being
+ * the lowest priority and 3 is being the highest priority.
+ */
+ uint8_t vlan_pri2cos_map_pri;
+ /* Reserved field. */
+ uint8_t reserved1;
+ /*
+ * This value controls the priority setting of VLAN PRI to CoS
+ * mapping based on VLAN Tags of tunneled header.
+ * This mapping only applies when tunneled headers
+ * are present.
+ *
+ * # Each XXX_pri variable shall have a unique priority value
+ * when it is being specified.
+ * # When comparing priorities of mappings, higher value
+ * indicates higher priority.
+ * For example, a value of 0-3 is returned where 0 is being
+ * the lowest priority and 3 is being the highest priority.
+ */
+ uint8_t tunnel_pri2cos_map_pri;
+ /*
+ * This value controls the priority setting of IP DSCP to CoS
+ * mapping based on inner IP header of tunneled packets or
+ * IP header of non-tunneled packets.
+ *
+ * # Each XXX_pri variable shall have a unique priority value
+ * when it is being specified.
+ * # When comparing priorities of mappings, higher value
+ * indicates higher priority.
+ * For example, a value of 0-3 is returned where 0 is being
+ * the lowest priority and 3 is being the highest priority.
+ */
+ uint8_t dscp2pri_map_pri;
+ /*
+ * This is a 16-bit bit mask that is used to request a
+ * specific configuration of time stamp capture of PTP messages
+ * on the receive side of this port.
+ * This field shall be ignored if the ptp_rx_ts_capture_enable
+ * flag is not set in this command.
+ * Otherwise, if bit 'i' is set, then the HWRM is being
+ * requested to configure the receive side of the port to
+ * capture the time stamp of every received PTP message
+ * with messageType field value set to i.
+ */
+ uint16_t rx_ts_capture_ptp_msg_type;
+ /*
+ * This is a 16-bit bit mask that is used to request a
+ * specific configuration of time stamp capture of PTP messages
+ * on the transmit side of this port.
+ * This field shall be ignored if the ptp_tx_ts_capture_enable
+ * flag is not set in this command.
+ * Otherwise, if bit 'i' is set, then the HWRM is being
+ * requested to configure the transmit side of the port to
+ * capture the time stamp of every transmitted PTP message
+ * with messageType field value set to i.
+ */
+ uint16_t tx_ts_capture_ptp_msg_type;
+ /* Configuration of CoS fields. */
+ uint8_t cos_field_cfg;
+ /* Reserved */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_RSVD1 \
+ UINT32_C(0x1)
+ /*
+ * This field is used to specify selection of VLAN PRI value
+ * based on whether one or two VLAN Tags are present in
+ * the inner packet headers of tunneled packets or
+ * non-tunneled packets.
+ * This field is valid only if inner VLAN PRI to CoS mapping
+ * is enabled.
+ * If VLAN PRI to CoS mapping is not enabled, then this
+ * field shall be ignored.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_MASK \
+ UINT32_C(0x6)
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_SFT \
+ 1
+ /*
+ * Select inner VLAN PRI when 1 or 2 VLAN Tags are
+ * present in the inner packet headers
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_INNERMOST \
+ (UINT32_C(0x0) << 1)
+ /*
+ * Select outer VLAN Tag PRI when 2 VLAN Tags are
+ * present in the inner packet headers.
+ * No VLAN PRI shall be selected for this configuration
+ * if only one VLAN Tag is present in the inner
+ * packet headers.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_OUTER \
+ (UINT32_C(0x1) << 1)
+ /*
+ * Select outermost VLAN PRI when 1 or 2 VLAN Tags
+ * are present in the inner packet headers
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_OUTERMOST \
+ (UINT32_C(0x2) << 1)
+ /* Unspecified */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED \
+ (UINT32_C(0x3) << 1)
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_LAST \
+ HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED
+ /*
+ * This field is used to specify selection of tunnel VLAN
+ * PRI value based on whether one or two VLAN Tags are
+ * present in tunnel headers.
+ * This field is valid only if tunnel VLAN PRI to CoS mapping
+ * is enabled.
+ * If tunnel VLAN PRI to CoS mapping is not enabled, then this
+ * field shall be ignored.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_MASK \
+ UINT32_C(0x18)
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_SFT \
+ 3
+ /*
+ * Select inner VLAN PRI when 1 or 2 VLAN Tags are
+ * present in the tunnel packet headers
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_INNERMOST \
+ (UINT32_C(0x0) << 3)
+ /*
+ * Select outer VLAN Tag PRI when 2 VLAN Tags are
+ * present in the tunnel packet headers.
+ * No tunnel VLAN PRI shall be selected for this
+ * configuration if only one VLAN Tag is present in
+ * the tunnel packet headers.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTER \
+ (UINT32_C(0x1) << 3)
+ /*
+ * Select outermost VLAN PRI when 1 or 2 VLAN Tags
+ * are present in the tunnel packet headers
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTERMOST \
+ (UINT32_C(0x2) << 3)
+ /* Unspecified */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED \
+ (UINT32_C(0x3) << 3)
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_LAST \
+ HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED
+ /*
+ * This field shall be used to provide default CoS value
+ * that has been configured on this port.
+ * This field is valid only if default CoS mapping
+ * is enabled.
+ * If default CoS mapping is not enabled, then this
+ * field shall be ignored.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_DEFAULT_COS_MASK \
+ UINT32_C(0xe0)
+ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_DEFAULT_COS_SFT \
+ 5
+ uint8_t unused_0[3];
+ /*
+ * This signed field specifies by how much to adjust the frequency
+ * of sync timer updates (measured in parts per billion).
+ */
+ int32_t ptp_freq_adj_ppb;
+ uint8_t unused_1[4];
+} __rte_packed;
+
+/* hwrm_port_mac_cfg_output (size:128b/16B) */
+struct hwrm_port_mac_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * This is the configured maximum length of Ethernet packet
+ * payload that is allowed to be received on the port.
+ * This value does not include the number of bytes used by
+ * Ethernet header and trailer (CRC).
+ */
+ uint16_t mru;
+ /*
+ * This is the configured maximum length of Ethernet packet
+ * payload that is allowed to be transmitted on the port.
+ * This value does not include the number of bytes used by
+ * Ethernet header and trailer (CRC).
+ */
+ uint16_t mtu;
+ /* Current configuration of the IPG value. */
+ uint8_t ipg;
+ /* Current value of the loopback value. */
+ uint8_t lpbk;
+ /* No loopback is selected. Normal operation. */
+ #define HWRM_PORT_MAC_CFG_OUTPUT_LPBK_NONE UINT32_C(0x0)
+ /*
+ * The HW will be configured with local loopback such that
+ * host data is sent back to the host without modification.
+ */
+ #define HWRM_PORT_MAC_CFG_OUTPUT_LPBK_LOCAL UINT32_C(0x1)
+ /*
+ * The HW will be configured with remote loopback such that
+ * port logic will send packets back out the transmitter that
+ * are received.
+ */
+ #define HWRM_PORT_MAC_CFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2)
+ #define HWRM_PORT_MAC_CFG_OUTPUT_LPBK_LAST \
+ HWRM_PORT_MAC_CFG_OUTPUT_LPBK_REMOTE
+ uint8_t unused_0;
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************
+ * hwrm_port_mac_qcfg *
+ **********************/
+
+
+/* hwrm_port_mac_qcfg_input (size:192b/24B) */
+struct hwrm_port_mac_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port that is to be configured. */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_port_mac_qcfg_output (size:192b/24B) */
+struct hwrm_port_mac_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * This is the configured maximum length of Ethernet packet
+ * payload that is allowed to be received on the port.
+ * This value does not include the number of bytes used by the
+ * Ethernet header and trailer (CRC).
+ */
+ uint16_t mru;
+ /*
+ * This is the configured maximum length of Ethernet packet
+ * payload that is allowed to be transmitted on the port.
+ * This value does not include the number of bytes used by the
+ * Ethernet header and trailer (CRC).
+ */
+ uint16_t mtu;
+ /*
+ * The minimum IPG that will
+ * be sent between packets by this port.
+ */
+ uint8_t ipg;
+ /* The loopback setting for the MAC. */
+ uint8_t lpbk;
+ /* No loopback is selected. Normal operation. */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_NONE UINT32_C(0x0)
+ /*
+ * The HW will be configured with local loopback such that
+ * host data is sent back to the host without modification.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_LOCAL UINT32_C(0x1)
+ /*
+ * The HW will be configured with remote loopback such that
+ * port logic will send packets back out the transmitter that
+ * are received.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2)
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_LAST \
+ HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_REMOTE
+ /*
+ * Priority setting for VLAN PRI to CoS mapping.
+ * # Each XXX_pri variable shall have a unique priority value
+ * when it is being used.
+ * # When comparing priorities of mappings, higher value
+ * indicates higher priority.
+ * For example, a value of 0-3 is returned where 0 is being
+ * the lowest priority and 3 is being the highest priority.
+ * # If the correspoding CoS mapping is not enabled, then this
+ * field should be ignored.
+ * # This value indicates the normalized priority value retained
+ * in the HWRM.
+ */
+ uint8_t vlan_pri2cos_map_pri;
+ /*
+ * In this field, a number of CoS mappings related flags
+ * are used to indicate configured CoS mappings.
+ */
+ uint8_t flags;
+ /*
+ * When this bit is set to '1', the inner VLAN PRI to CoS mapping
+ * is enabled.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_VLAN_PRI2COS_ENABLE \
+ UINT32_C(0x1)
+ /*
+ * When this bit is set to '1', tunnel VLAN PRI field to
+ * CoS mapping is enabled.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_TUNNEL_PRI2COS_ENABLE \
+ UINT32_C(0x2)
+ /*
+ * When this bit is set to '1', the IP DSCP to CoS mapping is
+ * enabled.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_IP_DSCP2COS_ENABLE \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', the Out-Of-Box WoL is enabled on this
+ * port.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_OOB_WOL_ENABLE \
+ UINT32_C(0x8)
+ /* When this bit is '1', PTP is enabled for RX on this port. */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_PTP_RX_TS_CAPTURE_ENABLE \
+ UINT32_C(0x10)
+ /* When this bit is '1', PTP is enabled for TX on this port. */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_PTP_TX_TS_CAPTURE_ENABLE \
+ UINT32_C(0x20)
+ /*
+ * Priority setting for tunnel VLAN PRI to CoS mapping.
+ * # Each XXX_pri variable shall have a unique priority value
+ * when it is being used.
+ * # When comparing priorities of mappings, higher value
+ * indicates higher priority.
+ * For example, a value of 0-3 is returned where 0 is being
+ * the lowest priority and 3 is being the highest priority.
+ * # If the correspoding CoS mapping is not enabled, then this
+ * field should be ignored.
+ * # This value indicates the normalized priority value retained
+ * in the HWRM.
+ */
+ uint8_t tunnel_pri2cos_map_pri;
+ /*
+ * Priority setting for DSCP to PRI mapping.
+ * # Each XXX_pri variable shall have a unique priority value
+ * when it is being used.
+ * # When comparing priorities of mappings, higher value
+ * indicates higher priority.
+ * For example, a value of 0-3 is returned where 0 is being
+ * the lowest priority and 3 is being the highest priority.
+ * # If the correspoding CoS mapping is not enabled, then this
+ * field should be ignored.
+ * # This value indicates the normalized priority value retained
+ * in the HWRM.
+ */
+ uint8_t dscp2pri_map_pri;
+ /*
+ * This is a 16-bit bit mask that represents the
+ * current configuration of time stamp capture of PTP messages
+ * on the receive side of this port.
+ * If bit 'i' is set, then the receive side of the port
+ * is configured to capture the time stamp of every
+ * received PTP message with messageType field value set
+ * to i.
+ * If all bits are set to 0 (i.e. field value set 0),
+ * then the receive side of the port is not configured
+ * to capture timestamp for PTP messages.
+ * If all bits are set to 1, then the receive side of the
+ * port is configured to capture timestamp for all PTP
+ * messages.
+ */
+ uint16_t rx_ts_capture_ptp_msg_type;
+ /*
+ * This is a 16-bit bit mask that represents the
+ * current configuration of time stamp capture of PTP messages
+ * on the transmit side of this port.
+ * If bit 'i' is set, then the transmit side of the port
+ * is configured to capture the time stamp of every
+ * received PTP message with messageType field value set
+ * to i.
+ * If all bits are set to 0 (i.e. field value set 0),
+ * then the transmit side of the port is not configured
+ * to capture timestamp for PTP messages.
+ * If all bits are set to 1, then the transmit side of the
+ * port is configured to capture timestamp for all PTP
+ * messages.
+ */
+ uint16_t tx_ts_capture_ptp_msg_type;
+ /* Configuration of CoS fields. */
+ uint8_t cos_field_cfg;
+ /* Reserved */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_RSVD \
+ UINT32_C(0x1)
+ /*
+ * This field is used for selecting VLAN PRI value
+ * based on whether one or two VLAN Tags are present in
+ * the inner packet headers of tunneled packets or
+ * non-tunneled packets.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_MASK \
+ UINT32_C(0x6)
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_SFT \
+ 1
+ /*
+ * Select inner VLAN PRI when 1 or 2 VLAN Tags are
+ * present in the inner packet headers
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_INNERMOST \
+ (UINT32_C(0x0) << 1)
+ /*
+ * Select outer VLAN Tag PRI when 2 VLAN Tags are
+ * present in the inner packet headers.
+ * No VLAN PRI is selected for this configuration
+ * if only one VLAN Tag is present in the inner
+ * packet headers.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_OUTER \
+ (UINT32_C(0x1) << 1)
+ /*
+ * Select outermost VLAN PRI when 1 or 2 VLAN Tags
+ * are present in the inner packet headers
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_OUTERMOST \
+ (UINT32_C(0x2) << 1)
+ /* Unspecified */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED \
+ (UINT32_C(0x3) << 1)
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_LAST \
+ HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED
+ /*
+ * This field is used for selecting tunnel VLAN PRI value
+ * based on whether one or two VLAN Tags are present in
+ * the tunnel headers of tunneled packets. This selection
+ * does not apply to non-tunneled packets.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_MASK \
+ UINT32_C(0x18)
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_SFT \
+ 3
+ /*
+ * Select inner VLAN PRI when 1 or 2 VLAN Tags are
+ * present in the tunnel packet headers
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_INNERMOST \
+ (UINT32_C(0x0) << 3)
+ /*
+ * Select outer VLAN Tag PRI when 2 VLAN Tags are
+ * present in the tunnel packet headers.
+ * No VLAN PRI is selected for this configuration
+ * if only one VLAN Tag is present in the tunnel
+ * packet headers.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTER \
+ (UINT32_C(0x1) << 3)
+ /*
+ * Select outermost VLAN PRI when 1 or 2 VLAN Tags
+ * are present in the tunnel packet headers
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTERMOST \
+ (UINT32_C(0x2) << 3)
+ /* Unspecified */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED \
+ (UINT32_C(0x3) << 3)
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_LAST \
+ HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED
+ /*
+ * This field is used to provide default CoS value that
+ * has been configured on this port.
+ */
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_DEFAULT_COS_MASK \
+ UINT32_C(0xe0)
+ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_DEFAULT_COS_SFT \
+ 5
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**************************
+ * hwrm_port_mac_ptp_qcfg *
+ **************************/
+
+
+/* hwrm_port_mac_ptp_qcfg_input (size:192b/24B) */
+struct hwrm_port_mac_ptp_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port that is being queried. */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_port_mac_ptp_qcfg_output (size:640b/80B) */
+struct hwrm_port_mac_ptp_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * In this field, a number of PTP related flags
+ * are used to indicate configured PTP capabilities.
+ */
+ uint8_t flags;
+ /*
+ * When this bit is set to '1', the PTP related registers are
+ * directly accessible by the host.
+ */
+ #define HWRM_PORT_MAC_PTP_QCFG_OUTPUT_FLAGS_DIRECT_ACCESS \
+ UINT32_C(0x1)
+ /*
+ * When this bit is set to '1', the PTP information is accessible
+ * via HWRM commands.
+ */
+ #define HWRM_PORT_MAC_PTP_QCFG_OUTPUT_FLAGS_HWRM_ACCESS \
+ UINT32_C(0x2)
+ /*
+ * When this bit is set to '1', the device supports one-step
+ * Tx timestamping.
+ */
+ #define HWRM_PORT_MAC_PTP_QCFG_OUTPUT_FLAGS_ONE_STEP_TX_TS \
+ UINT32_C(0x4)
+ uint8_t unused_0[3];
+ /* Offset of the PTP register for the lower 32 bits of timestamp for RX. */
+ uint32_t rx_ts_reg_off_lower;
+ /* Offset of the PTP register for the upper 32 bits of timestamp for RX. */
+ uint32_t rx_ts_reg_off_upper;
+ /* Offset of the PTP register for the sequence ID for RX. */
+ uint32_t rx_ts_reg_off_seq_id;
+ /* Offset of the first PTP source ID for RX. */
+ uint32_t rx_ts_reg_off_src_id_0;
+ /* Offset of the second PTP source ID for RX. */
+ uint32_t rx_ts_reg_off_src_id_1;
+ /* Offset of the third PTP source ID for RX. */
+ uint32_t rx_ts_reg_off_src_id_2;
+ /* Offset of the domain ID for RX. */
+ uint32_t rx_ts_reg_off_domain_id;
+ /* Offset of the PTP FIFO register for RX. */
+ uint32_t rx_ts_reg_off_fifo;
+ /* Offset of the PTP advance FIFO register for RX. */
+ uint32_t rx_ts_reg_off_fifo_adv;
+ /* PTP timestamp granularity for RX. */
+ uint32_t rx_ts_reg_off_granularity;
+ /* Offset of the PTP register for the lower 32 bits of timestamp for TX. */
+ uint32_t tx_ts_reg_off_lower;
+ /* Offset of the PTP register for the upper 32 bits of timestamp for TX. */
+ uint32_t tx_ts_reg_off_upper;
+ /* Offset of the PTP register for the sequence ID for TX. */
+ uint32_t tx_ts_reg_off_seq_id;
+ /* Offset of the PTP FIFO register for TX. */
+ uint32_t tx_ts_reg_off_fifo;
+ /* PTP timestamp granularity for TX. */
+ uint32_t tx_ts_reg_off_granularity;
+ uint8_t unused_1[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/* Port Tx Statistics Formats */
+/* tx_port_stats (size:3264b/408B) */
+struct tx_port_stats {
+ /* Total Number of 64 Bytes frames transmitted */
+ uint64_t tx_64b_frames;
+ /* Total Number of 65-127 Bytes frames transmitted */
+ uint64_t tx_65b_127b_frames;
+ /* Total Number of 128-255 Bytes frames transmitted */
+ uint64_t tx_128b_255b_frames;
+ /* Total Number of 256-511 Bytes frames transmitted */
+ uint64_t tx_256b_511b_frames;
+ /* Total Number of 512-1023 Bytes frames transmitted */
+ uint64_t tx_512b_1023b_frames;
+ /* Total Number of 1024-1518 Bytes frames transmitted */
+ uint64_t tx_1024b_1518b_frames;
+ /*
+ * Total Number of each good VLAN (exludes FCS errors)
+ * frame transmitted which is 1519 to 1522 bytes in length
+ * inclusive (excluding framing bits but including FCS bytes).
+ */
+ uint64_t tx_good_vlan_frames;
+ /* Total Number of 1519-2047 Bytes frames transmitted */
+ uint64_t tx_1519b_2047b_frames;
+ /* Total Number of 2048-4095 Bytes frames transmitted */
+ uint64_t tx_2048b_4095b_frames;
+ /* Total Number of 4096-9216 Bytes frames transmitted */
+ uint64_t tx_4096b_9216b_frames;
+ /* Total Number of 9217-16383 Bytes frames transmitted */
+ uint64_t tx_9217b_16383b_frames;
+ /* Total Number of good frames transmitted */
+ uint64_t tx_good_frames;
+ /* Total Number of frames transmitted */
+ uint64_t tx_total_frames;
+ /* Total number of unicast frames transmitted */
+ uint64_t tx_ucast_frames;
+ /* Total number of multicast frames transmitted */
+ uint64_t tx_mcast_frames;
+ /* Total number of broadcast frames transmitted */
+ uint64_t tx_bcast_frames;
+ /* Total number of PAUSE control frames transmitted */
+ uint64_t tx_pause_frames;
+ /*
+ * Total number of PFC/per-priority PAUSE
+ * control frames transmitted
+ */
+ uint64_t tx_pfc_frames;
+ /* Total number of jabber frames transmitted */
+ uint64_t tx_jabber_frames;
+ /* Total number of frames transmitted with FCS error */
+ uint64_t tx_fcs_err_frames;
+ /* Total number of control frames transmitted */
+ uint64_t tx_control_frames;
+ /* Total number of over-sized frames transmitted */
+ uint64_t tx_oversz_frames;
+ /* Total number of frames with single deferral */
+ uint64_t tx_single_dfrl_frames;
+ /* Total number of frames with multiple deferrals */
+ uint64_t tx_multi_dfrl_frames;
+ /* Total number of frames with single collision */
+ uint64_t tx_single_coll_frames;
+ /* Total number of frames with multiple collisions */
+ uint64_t tx_multi_coll_frames;
+ /* Total number of frames with late collisions */
+ uint64_t tx_late_coll_frames;
+ /* Total number of frames with excessive collisions */
+ uint64_t tx_excessive_coll_frames;
+ /* Total number of fragmented frames transmitted */
+ uint64_t tx_frag_frames;
+ /* Total number of transmit errors */
+ uint64_t tx_err;
+ /* Total number of single VLAN tagged frames transmitted */
+ uint64_t tx_tagged_frames;
+ /* Total number of double VLAN tagged frames transmitted */
+ uint64_t tx_dbl_tagged_frames;
+ /* Total number of runt frames transmitted */
+ uint64_t tx_runt_frames;
+ /* Total number of TX FIFO under runs */
+ uint64_t tx_fifo_underruns;
+ /*
+ * Total number of PFC frames with PFC enabled bit for
+ * Pri 0 transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri0;
+ /*
+ * Total number of PFC frames with PFC enabled bit for
+ * Pri 1 transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri1;
+ /*
+ * Total number of PFC frames with PFC enabled bit for
+ * Pri 2 transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri2;
+ /*
+ * Total number of PFC frames with PFC enabled bit for
+ * Pri 3 transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri3;
+ /*
+ * Total number of PFC frames with PFC enabled bit for
+ * Pri 4 transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri4;
+ /*
+ * Total number of PFC frames with PFC enabled bit for
+ * Pri 5 transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri5;
+ /*
+ * Total number of PFC frames with PFC enabled bit for
+ * Pri 6 transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri6;
+ /*
+ * Total number of PFC frames with PFC enabled bit for
+ * Pri 7 transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri7;
+ /* Total number of EEE LPI Events on TX */
+ uint64_t tx_eee_lpi_events;
+ /* EEE LPI Duration Counter on TX */
+ uint64_t tx_eee_lpi_duration;
+ /*
+ * Total number of Link Level Flow Control (LLFC) messages
+ * transmitted
+ */
+ uint64_t tx_llfc_logical_msgs;
+ /* Total number of HCFC messages transmitted */
+ uint64_t tx_hcfc_msgs;
+ /* Total number of TX collisions */
+ uint64_t tx_total_collisions;
+ /* Total number of transmitted bytes */
+ uint64_t tx_bytes;
+ /* Total number of end-to-end HOL frames */
+ uint64_t tx_xthol_frames;
+ /* Total Tx Drops per Port reported by STATS block */
+ uint64_t tx_stat_discard;
+ /* Total Tx Error Drops per Port reported by STATS block */
+ uint64_t tx_stat_error;
+} __rte_packed;
+
+/* Port Rx Statistics Formats */
+/* rx_port_stats (size:4224b/528B) */
+struct rx_port_stats {
+ /* Total Number of 64 Bytes frames received */
+ uint64_t rx_64b_frames;
+ /* Total Number of 65-127 Bytes frames received */
+ uint64_t rx_65b_127b_frames;
+ /* Total Number of 128-255 Bytes frames received */
+ uint64_t rx_128b_255b_frames;
+ /* Total Number of 256-511 Bytes frames received */
+ uint64_t rx_256b_511b_frames;
+ /* Total Number of 512-1023 Bytes frames received */
+ uint64_t rx_512b_1023b_frames;
+ /* Total Number of 1024-1518 Bytes frames received */
+ uint64_t rx_1024b_1518b_frames;
+ /*
+ * Total Number of each good VLAN (exludes FCS errors)
+ * frame received which is 1519 to 1522 bytes in length
+ * inclusive (excluding framing bits but including FCS bytes).
+ */
+ uint64_t rx_good_vlan_frames;
+ /* Total Number of 1519-2047 Bytes frames received */
+ uint64_t rx_1519b_2047b_frames;
+ /* Total Number of 2048-4095 Bytes frames received */
+ uint64_t rx_2048b_4095b_frames;
+ /* Total Number of 4096-9216 Bytes frames received */
+ uint64_t rx_4096b_9216b_frames;
+ /* Total Number of 9217-16383 Bytes frames received */
+ uint64_t rx_9217b_16383b_frames;
+ /* Total number of frames received */
+ uint64_t rx_total_frames;
+ /* Total number of unicast frames received */
+ uint64_t rx_ucast_frames;
+ /* Total number of multicast frames received */
+ uint64_t rx_mcast_frames;
+ /* Total number of broadcast frames received */
+ uint64_t rx_bcast_frames;
+ /* Total number of received frames with FCS error */
+ uint64_t rx_fcs_err_frames;
+ /* Total number of control frames received */
+ uint64_t rx_ctrl_frames;
+ /* Total number of PAUSE frames received */
+ uint64_t rx_pause_frames;
+ /* Total number of PFC frames received */
+ uint64_t rx_pfc_frames;
+ /*
+ * Total number of frames received with an unsupported
+ * opcode
+ */
+ uint64_t rx_unsupported_opcode_frames;
+ /*
+ * Total number of frames received with an unsupported
+ * DA for pause and PFC
+ */
+ uint64_t rx_unsupported_da_pausepfc_frames;
+ /* Total number of frames received with an unsupported SA */
+ uint64_t rx_wrong_sa_frames;
+ /* Total number of received packets with alignment error */
+ uint64_t rx_align_err_frames;
+ /* Total number of received frames with out-of-range length */
+ uint64_t rx_oor_len_frames;
+ /* Total number of received frames with error termination */
+ uint64_t rx_code_err_frames;
+ /*
+ * Total number of received frames with a false carrier is
+ * detected during idle, as defined by RX_ER samples active
+ * and RXD is 0xE. The event is reported along with the
+ * statistics generated on the next received frame. Only
+ * one false carrier condition can be detected and logged
+ * between frames.
+ *
+ * Carrier event, valid for 10M/100M speed modes only.
+ */
+ uint64_t rx_false_carrier_frames;
+ /* Total number of over-sized frames received */
+ uint64_t rx_ovrsz_frames;
+ /* Total number of jabber packets received */
+ uint64_t rx_jbr_frames;
+ /* Total number of received frames with MTU error */
+ uint64_t rx_mtu_err_frames;
+ /* Total number of received frames with CRC match */
+ uint64_t rx_match_crc_frames;
+ /* Total number of frames received promiscuously */
+ uint64_t rx_promiscuous_frames;
+ /*
+ * Total number of received frames with one or two VLAN
+ * tags
+ */
+ uint64_t rx_tagged_frames;
+ /* Total number of received frames with two VLAN tags */
+ uint64_t rx_double_tagged_frames;
+ /* Total number of truncated frames received */
+ uint64_t rx_trunc_frames;
+ /* Total number of good frames (without errors) received */
+ uint64_t rx_good_frames;
+ /*
+ * Total number of received PFC frames with transition from
+ * XON to XOFF on Pri 0
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri0;
+ /*
+ * Total number of received PFC frames with transition from
+ * XON to XOFF on Pri 1
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri1;
+ /*
+ * Total number of received PFC frames with transition from
+ * XON to XOFF on Pri 2
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri2;
+ /*
+ * Total number of received PFC frames with transition from
+ * XON to XOFF on Pri 3
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri3;
+ /*
+ * Total number of received PFC frames with transition from
+ * XON to XOFF on Pri 4
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri4;
+ /*
+ * Total number of received PFC frames with transition from
+ * XON to XOFF on Pri 5
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri5;
+ /*
+ * Total number of received PFC frames with transition from
+ * XON to XOFF on Pri 6
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri6;
+ /*
+ * Total number of received PFC frames with transition from
+ * XON to XOFF on Pri 7
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri7;
+ /*
+ * Total number of received PFC frames with PFC enabled
+ * bit for Pri 0
+ */
+ uint64_t rx_pfc_ena_frames_pri0;
+ /*
+ * Total number of received PFC frames with PFC enabled
+ * bit for Pri 1
+ */
+ uint64_t rx_pfc_ena_frames_pri1;
+ /*
+ * Total number of received PFC frames with PFC enabled
+ * bit for Pri 2
+ */
+ uint64_t rx_pfc_ena_frames_pri2;
+ /*
+ * Total number of received PFC frames with PFC enabled
+ * bit for Pri 3
+ */
+ uint64_t rx_pfc_ena_frames_pri3;
+ /*
+ * Total number of received PFC frames with PFC enabled
+ * bit for Pri 4
+ */
+ uint64_t rx_pfc_ena_frames_pri4;
+ /*
+ * Total number of received PFC frames with PFC enabled
+ * bit for Pri 5
+ */
+ uint64_t rx_pfc_ena_frames_pri5;
+ /*
+ * Total number of received PFC frames with PFC enabled
+ * bit for Pri 6
+ */
+ uint64_t rx_pfc_ena_frames_pri6;
+ /*
+ * Total number of received PFC frames with PFC enabled
+ * bit for Pri 7
+ */
+ uint64_t rx_pfc_ena_frames_pri7;
+ /* Total Number of frames received with SCH CRC error */
+ uint64_t rx_sch_crc_err_frames;
+ /* Total Number of under-sized frames received */
+ uint64_t rx_undrsz_frames;
+ /* Total Number of fragmented frames received */
+ uint64_t rx_frag_frames;
+ /* Total number of RX EEE LPI Events */
+ uint64_t rx_eee_lpi_events;
+ /* EEE LPI Duration Counter on RX */
+ uint64_t rx_eee_lpi_duration;
+ /*
+ * Total number of physical type Link Level Flow Control
+ * (LLFC) messages received
+ */
+ uint64_t rx_llfc_physical_msgs;
+ /*
+ * Total number of logical type Link Level Flow Control
+ * (LLFC) messages received
+ */
+ uint64_t rx_llfc_logical_msgs;
+ /*
+ * Total number of logical type Link Level Flow Control
+ * (LLFC) messages received with CRC error
+ */
+ uint64_t rx_llfc_msgs_with_crc_err;
+ /* Total number of HCFC messages received */
+ uint64_t rx_hcfc_msgs;
+ /* Total number of HCFC messages received with CRC error */
+ uint64_t rx_hcfc_msgs_with_crc_err;
+ /* Total number of received bytes */
+ uint64_t rx_bytes;
+ /* Total number of bytes received in runt frames */
+ uint64_t rx_runt_bytes;
+ /* Total number of runt frames received */
+ uint64_t rx_runt_frames;
+ /* Total Rx Discards per Port reported by STATS block */
+ uint64_t rx_stat_discard;
+ uint64_t rx_stat_err;
+} __rte_packed;
+
+/********************
+ * hwrm_port_qstats *
+ ********************/
+
+
+/* hwrm_port_qstats_input (size:320b/40B) */
+struct hwrm_port_qstats_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port that is being queried. */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+ /*
+ * This is the host address where
+ * Tx port statistics will be stored
+ */
+ uint64_t tx_stat_host_addr;
+ /*
+ * This is the host address where
+ * Rx port statistics will be stored
+ */
+ uint64_t rx_stat_host_addr;
+} __rte_packed;
+
+/* hwrm_port_qstats_output (size:128b/16B) */
+struct hwrm_port_qstats_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* The size of TX port statistics block in bytes. */
+ uint16_t tx_stat_size;
+ /* The size of RX port statistics block in bytes. */
+ uint16_t rx_stat_size;
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/* Port Tx Statistics extended Formats */
+/* tx_port_stats_ext (size:2048b/256B) */
+struct tx_port_stats_ext {
+ /* Total number of tx bytes count on cos queue 0 */
+ uint64_t tx_bytes_cos0;
+ /* Total number of tx bytes count on cos queue 1 */
+ uint64_t tx_bytes_cos1;
+ /* Total number of tx bytes count on cos queue 2 */
+ uint64_t tx_bytes_cos2;
+ /* Total number of tx bytes count on cos queue 3 */
+ uint64_t tx_bytes_cos3;
+ /* Total number of tx bytes count on cos queue 4 */
+ uint64_t tx_bytes_cos4;
+ /* Total number of tx bytes count on cos queue 5 */
+ uint64_t tx_bytes_cos5;
+ /* Total number of tx bytes count on cos queue 6 */
+ uint64_t tx_bytes_cos6;
+ /* Total number of tx bytes count on cos queue 7 */
+ uint64_t tx_bytes_cos7;
+ /* Total number of tx packets count on cos queue 0 */
+ uint64_t tx_packets_cos0;
+ /* Total number of tx packets count on cos queue 1 */
+ uint64_t tx_packets_cos1;
+ /* Total number of tx packets count on cos queue 2 */
+ uint64_t tx_packets_cos2;
+ /* Total number of tx packets count on cos queue 3 */
+ uint64_t tx_packets_cos3;
+ /* Total number of tx packets count on cos queue 4 */
+ uint64_t tx_packets_cos4;
+ /* Total number of tx packets count on cos queue 5 */
+ uint64_t tx_packets_cos5;
+ /* Total number of tx packets count on cos queue 6 */
+ uint64_t tx_packets_cos6;
+ /* Total number of tx packets count on cos queue 7 */
+ uint64_t tx_packets_cos7;
+ /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 0 */
+ uint64_t pfc_pri0_tx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 0 */
+ uint64_t pfc_pri0_tx_transitions;
+ /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 1 */
+ uint64_t pfc_pri1_tx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 1 */
+ uint64_t pfc_pri1_tx_transitions;
+ /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 2 */
+ uint64_t pfc_pri2_tx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 2 */
+ uint64_t pfc_pri2_tx_transitions;
+ /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 3 */
+ uint64_t pfc_pri3_tx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 3 */
+ uint64_t pfc_pri3_tx_transitions;
+ /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 4 */
+ uint64_t pfc_pri4_tx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 4 */
+ uint64_t pfc_pri4_tx_transitions;
+ /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 5 */
+ uint64_t pfc_pri5_tx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 5 */
+ uint64_t pfc_pri5_tx_transitions;
+ /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 6 */
+ uint64_t pfc_pri6_tx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 6 */
+ uint64_t pfc_pri6_tx_transitions;
+ /* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 7 */
+ uint64_t pfc_pri7_tx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 7 */
+ uint64_t pfc_pri7_tx_transitions;
+} __rte_packed;
+
+/* Port Rx Statistics extended Formats */
+/* rx_port_stats_ext (size:3648b/456B) */
+struct rx_port_stats_ext {
+ /* Number of times link state changed to down */
+ uint64_t link_down_events;
+ /* Number of times the idle rings with pause bit are found */
+ uint64_t continuous_pause_events;
+ /* Number of times the active rings pause bit resumed back */
+ uint64_t resume_pause_events;
+ /* Number of times, the ROCE cos queue PFC is disabled to avoid pause flood/burst */
+ uint64_t continuous_roce_pause_events;
+ /* Number of times, the ROCE cos queue PFC is enabled back */
+ uint64_t resume_roce_pause_events;
+ /* Total number of rx bytes count on cos queue 0 */
+ uint64_t rx_bytes_cos0;
+ /* Total number of rx bytes count on cos queue 1 */
+ uint64_t rx_bytes_cos1;
+ /* Total number of rx bytes count on cos queue 2 */
+ uint64_t rx_bytes_cos2;
+ /* Total number of rx bytes count on cos queue 3 */
+ uint64_t rx_bytes_cos3;
+ /* Total number of rx bytes count on cos queue 4 */
+ uint64_t rx_bytes_cos4;
+ /* Total number of rx bytes count on cos queue 5 */
+ uint64_t rx_bytes_cos5;
+ /* Total number of rx bytes count on cos queue 6 */
+ uint64_t rx_bytes_cos6;
+ /* Total number of rx bytes count on cos queue 7 */
+ uint64_t rx_bytes_cos7;
+ /* Total number of rx packets count on cos queue 0 */
+ uint64_t rx_packets_cos0;
+ /* Total number of rx packets count on cos queue 1 */
+ uint64_t rx_packets_cos1;
+ /* Total number of rx packets count on cos queue 2 */
+ uint64_t rx_packets_cos2;
+ /* Total number of rx packets count on cos queue 3 */
+ uint64_t rx_packets_cos3;
+ /* Total number of rx packets count on cos queue 4 */
+ uint64_t rx_packets_cos4;
+ /* Total number of rx packets count on cos queue 5 */
+ uint64_t rx_packets_cos5;
+ /* Total number of rx packets count on cos queue 6 */
+ uint64_t rx_packets_cos6;
+ /* Total number of rx packets count on cos queue 7 */
+ uint64_t rx_packets_cos7;
+ /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 0 */
+ uint64_t pfc_pri0_rx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 0 */
+ uint64_t pfc_pri0_rx_transitions;
+ /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 1 */
+ uint64_t pfc_pri1_rx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 1 */
+ uint64_t pfc_pri1_rx_transitions;
+ /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 2 */
+ uint64_t pfc_pri2_rx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 2 */
+ uint64_t pfc_pri2_rx_transitions;
+ /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 3 */
+ uint64_t pfc_pri3_rx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 3 */
+ uint64_t pfc_pri3_rx_transitions;
+ /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 4 */
+ uint64_t pfc_pri4_rx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 4 */
+ uint64_t pfc_pri4_rx_transitions;
+ /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 5 */
+ uint64_t pfc_pri5_rx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 5 */
+ uint64_t pfc_pri5_rx_transitions;
+ /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 6 */
+ uint64_t pfc_pri6_rx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 6 */
+ uint64_t pfc_pri6_rx_transitions;
+ /* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 7 */
+ uint64_t pfc_pri7_rx_duration_us;
+ /* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 7 */
+ uint64_t pfc_pri7_rx_transitions;
+ /* Total number of received bits */
+ uint64_t rx_bits;
+ /* The number of events where the port receive buffer was over 85% full */
+ uint64_t rx_buffer_passed_threshold;
+ /*
+ * The number of symbol errors that wasn't corrected by FEC correction
+ * alogirithm
+ */
+ uint64_t rx_pcs_symbol_err;
+ /* The number of corrected bits on the port according to active FEC */
+ uint64_t rx_corrected_bits;
+ /* Total number of rx discard bytes count on cos queue 0 */
+ uint64_t rx_discard_bytes_cos0;
+ /* Total number of rx discard bytes count on cos queue 1 */
+ uint64_t rx_discard_bytes_cos1;
+ /* Total number of rx discard bytes count on cos queue 2 */
+ uint64_t rx_discard_bytes_cos2;
+ /* Total number of rx discard bytes count on cos queue 3 */
+ uint64_t rx_discard_bytes_cos3;
+ /* Total number of rx discard bytes count on cos queue 4 */
+ uint64_t rx_discard_bytes_cos4;
+ /* Total number of rx discard bytes count on cos queue 5 */
+ uint64_t rx_discard_bytes_cos5;
+ /* Total number of rx discard bytes count on cos queue 6 */
+ uint64_t rx_discard_bytes_cos6;
+ /* Total number of rx discard bytes count on cos queue 7 */
+ uint64_t rx_discard_bytes_cos7;
+ /* Total number of rx discard packets count on cos queue 0 */
+ uint64_t rx_discard_packets_cos0;
+ /* Total number of rx discard packets count on cos queue 1 */
+ uint64_t rx_discard_packets_cos1;
+ /* Total number of rx discard packets count on cos queue 2 */
+ uint64_t rx_discard_packets_cos2;
+ /* Total number of rx discard packets count on cos queue 3 */
+ uint64_t rx_discard_packets_cos3;
+ /* Total number of rx discard packets count on cos queue 4 */
+ uint64_t rx_discard_packets_cos4;
+ /* Total number of rx discard packets count on cos queue 5 */
+ uint64_t rx_discard_packets_cos5;
+ /* Total number of rx discard packets count on cos queue 6 */
+ uint64_t rx_discard_packets_cos6;
+ /* Total number of rx discard packets count on cos queue 7 */
+ uint64_t rx_discard_packets_cos7;
+} __rte_packed;
+
+/************************
+ * hwrm_port_qstats_ext *
+ ************************/
+
+
+/* hwrm_port_qstats_ext_input (size:320b/40B) */
+struct hwrm_port_qstats_ext_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port that is being queried. */
+ uint16_t port_id;
+ /*
+ * The size of TX port extended
+ * statistics block in bytes.
+ */
+ uint16_t tx_stat_size;
+ /*
+ * The size of RX port extended
+ * statistics block in bytes
+ */
+ uint16_t rx_stat_size;
+ uint8_t unused_0[2];
+ /*
+ * This is the host address where
+ * Tx port statistics will be stored
+ */
+ uint64_t tx_stat_host_addr;
+ /*
+ * This is the host address where
+ * Rx port statistics will be stored
+ */
+ uint64_t rx_stat_host_addr;
+} __rte_packed;
+
+/* hwrm_port_qstats_ext_output (size:128b/16B) */
+struct hwrm_port_qstats_ext_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* The size of TX port statistics block in bytes. */
+ uint16_t tx_stat_size;
+ /* The size of RX port statistics block in bytes. */
+ uint16_t rx_stat_size;
+ /* Total number of active cos queues available. */
+ uint16_t total_active_cos_queues;
+ uint8_t flags;
+ /*
+ * If set to 1, then this field indicates that clear
+ * roce specific counters is supported.
+ */
+ #define HWRM_PORT_QSTATS_EXT_OUTPUT_FLAGS_CLEAR_ROCE_COUNTERS_SUPPORTED \
+ UINT32_C(0x1)
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*************************
+ * hwrm_port_lpbk_qstats *
+ *************************/
+
+
+/* hwrm_port_lpbk_qstats_input (size:128b/16B) */
+struct hwrm_port_lpbk_qstats_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+} __rte_packed;
+
+/* hwrm_port_lpbk_qstats_output (size:768b/96B) */
+struct hwrm_port_lpbk_qstats_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Number of transmitted unicast frames */
+ uint64_t lpbk_ucast_frames;
+ /* Number of transmitted multicast frames */
+ uint64_t lpbk_mcast_frames;
+ /* Number of transmitted broadcast frames */
+ uint64_t lpbk_bcast_frames;
+ /* Number of transmitted bytes for unicast traffic */
+ uint64_t lpbk_ucast_bytes;
+ /* Number of transmitted bytes for multicast traffic */
+ uint64_t lpbk_mcast_bytes;
+ /* Number of transmitted bytes for broadcast traffic */
+ uint64_t lpbk_bcast_bytes;
+ /* Total Tx Drops for loopback traffic reported by STATS block */
+ uint64_t tx_stat_discard;
+ /* Total Tx Error Drops for loopback traffic reported by STATS block */
+ uint64_t tx_stat_error;
+ /* Total Rx Drops for loopback traffic reported by STATS block */
+ uint64_t rx_stat_discard;
+ /* Total Rx Error Drops for loopback traffic reported by STATS block */
+ uint64_t rx_stat_error;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***********************
+ * hwrm_port_clr_stats *
+ ***********************/
+
+
+/* hwrm_port_clr_stats_input (size:192b/24B) */
+struct hwrm_port_clr_stats_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port that is being queried. */
+ uint16_t port_id;
+ uint8_t flags;
+ /*
+ * If set to 1, then this field indicates clear the following RoCE
+ * specific counters.
+ * RoCE associated TX/RX cos counters
+ * CNP associated TX/RX cos counters
+ * RoCE/CNP specific TX/RX flow counters
+ * Firmware will determine the RoCE/CNP cos queue based on qos profile.
+ * This flag is honored only when RoCE is enabled on that port.
+ */
+ #define HWRM_PORT_CLR_STATS_INPUT_FLAGS_ROCE_COUNTERS UINT32_C(0x1)
+ uint8_t unused_0[5];
+} __rte_packed;
+
+/* hwrm_port_clr_stats_output (size:128b/16B) */
+struct hwrm_port_clr_stats_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***********************
+ * hwrm_port_phy_qcaps *
+ ***********************/
+
+
+/* hwrm_port_phy_qcaps_input (size:192b/24B) */
+struct hwrm_port_phy_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port that is being queried. */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_port_phy_qcaps_output (size:192b/24B) */
+struct hwrm_port_phy_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* PHY capability flags */
+ uint8_t flags;
+ /*
+ * If set to 1, then this field indicates that the
+ * link is capable of supporting EEE.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_EEE_SUPPORTED \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, then this field indicates that the
+ * PHY is capable of supporting external loopback.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_EXTERNAL_LPBK_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, then this field indicates that the
+ * PHY is capable of supporting loopback in autoneg mode.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_AUTONEG_LPBK_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * Indicates if the configuration of shared PHY settings is supported.
+ * In cases where a physical port is shared by multiple functions
+ * (e.g. NPAR, multihost, etc), the configuration of PHY
+ * settings may not be allowed. Callers to HWRM_PORT_PHY_CFG will
+ * get an HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED error in this case.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_SHARED_PHY_CFG_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * Reserved field. The HWRM shall set this field to 0.
+ * An HWRM client shall ignore this field.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_SFT 4
+ /* Number of front panel ports for this device. */
+ uint8_t port_cnt;
+ /* Not supported or unknown */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_UNKNOWN UINT32_C(0x0)
+ /* single port device */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_1 UINT32_C(0x1)
+ /* 2-port device */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_2 UINT32_C(0x2)
+ /* 3-port device */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_3 UINT32_C(0x3)
+ /* 4-port device */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_4 UINT32_C(0x4)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_LAST \
+ HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_4
+ /*
+ * This is a bit mask to indicate what speeds are supported
+ * as forced speeds on this link.
+ * For each speed that can be forced on this link, the
+ * corresponding mask bit shall be set to '1'.
+ */
+ uint16_t supported_speeds_force_mode;
+ /* 100Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_100MBHD \
+ UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_100MB \
+ UINT32_C(0x2)
+ /* 1Gb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_1GBHD \
+ UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_1GB \
+ UINT32_C(0x8)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_2GB \
+ UINT32_C(0x10)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_2_5GB \
+ UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_10GB \
+ UINT32_C(0x40)
+ /* 20Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_20GB \
+ UINT32_C(0x80)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_25GB \
+ UINT32_C(0x100)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_40GB \
+ UINT32_C(0x200)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_50GB \
+ UINT32_C(0x400)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_100GB \
+ UINT32_C(0x800)
+ /* 10Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_10MBHD \
+ UINT32_C(0x1000)
+ /* 10Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_10MB \
+ UINT32_C(0x2000)
+ /* 200Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_200GB \
+ UINT32_C(0x4000)
+ /*
+ * This is a bit mask to indicate what speeds are supported
+ * for autonegotiation on this link.
+ * For each speed that can be autonegotiated on this link, the
+ * corresponding mask bit shall be set to '1'.
+ */
+ uint16_t supported_speeds_auto_mode;
+ /* 100Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_100MBHD \
+ UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_100MB \
+ UINT32_C(0x2)
+ /* 1Gb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_1GBHD \
+ UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_1GB \
+ UINT32_C(0x8)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_2GB \
+ UINT32_C(0x10)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_2_5GB \
+ UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_10GB \
+ UINT32_C(0x40)
+ /* 20Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_20GB \
+ UINT32_C(0x80)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_25GB \
+ UINT32_C(0x100)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_40GB \
+ UINT32_C(0x200)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_50GB \
+ UINT32_C(0x400)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_100GB \
+ UINT32_C(0x800)
+ /* 10Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_10MBHD \
+ UINT32_C(0x1000)
+ /* 10Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_10MB \
+ UINT32_C(0x2000)
+ /* 200Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_200GB \
+ UINT32_C(0x4000)
+ /*
+ * This is a bit mask to indicate what speeds are supported
+ * for EEE on this link.
+ * For each speed that can be autonegotiated when EEE is enabled
+ * on this link, the corresponding mask bit shall be set to '1'.
+ * This field is only valid when the eee_suppotred is set to '1'.
+ */
+ uint16_t supported_speeds_eee_mode;
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD1 \
+ UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_100MB \
+ UINT32_C(0x2)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD2 \
+ UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_1GB \
+ UINT32_C(0x8)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD3 \
+ UINT32_C(0x10)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD4 \
+ UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_10GB \
+ UINT32_C(0x40)
+ uint32_t tx_lpi_timer_low;
+ /*
+ * The lowest value of TX LPI timer that can be set on this link
+ * when EEE is enabled. This value is in microseconds.
+ * This field is valid only when_eee_supported is set to '1'.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_LOW_MASK \
+ UINT32_C(0xffffff)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_LOW_SFT 0
+ /*
+ * Reserved field. The HWRM shall set this field to 0.
+ * An HWRM client shall ignore this field.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_RSVD2_MASK \
+ UINT32_C(0xff000000)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_RSVD2_SFT 24
+ uint32_t valid_tx_lpi_timer_high;
+ /*
+ * The highest value of TX LPI timer that can be set on this link
+ * when EEE is enabled. This value is in microseconds.
+ * This field is valid only when_eee_supported is set to '1'.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_HIGH_MASK \
+ UINT32_C(0xffffff)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_HIGH_SFT 0
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_VALID_MASK \
+ UINT32_C(0xff000000)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_VALID_SFT 24
+} __rte_packed;
+
+/****************************
+ * hwrm_port_phy_mdio_write *
+ ****************************/
+
+
+/* hwrm_port_phy_mdio_write_input (size:320b/40B) */
+struct hwrm_port_phy_mdio_write_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Reserved for future use. */
+ uint32_t unused_0[2];
+ /* Port ID of port. */
+ uint16_t port_id;
+ /* If phy_address is 0xFF, port_id will be used to derive phy_addr. */
+ uint8_t phy_addr;
+ /* 8-bit device address. */
+ uint8_t dev_addr;
+ /* 16-bit register address. */
+ uint16_t reg_addr;
+ /* 16-bit register data. */
+ uint16_t reg_data;
+ /*
+ * When this bit is set to 1 a Clause 45 mdio access is done.
+ * when this bit is set to 0 a Clause 22 mdio access is done.
+ */
+ uint8_t cl45_mdio;
+ /* */
+ uint8_t unused_1[7];
+} __rte_packed;
+
+/* hwrm_port_phy_mdio_write_output (size:128b/16B) */
+struct hwrm_port_phy_mdio_write_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***************************
+ * hwrm_port_phy_mdio_read *
+ ***************************/
+
+
+/* hwrm_port_phy_mdio_read_input (size:256b/32B) */
+struct hwrm_port_phy_mdio_read_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Reserved for future use. */
+ uint32_t unused_0[2];
+ /* Port ID of port. */
+ uint16_t port_id;
+ /* If phy_address is 0xFF, port_id will be used to derive phy_addr. */
+ uint8_t phy_addr;
+ /* 8-bit device address. */
+ uint8_t dev_addr;
+ /* 16-bit register address. */
+ uint16_t reg_addr;
+ /*
+ * When this bit is set to 1 a Clause 45 mdio access is done.
+ * when this bit is set to 0 a Clause 22 mdio access is done.
+ */
+ uint8_t cl45_mdio;
+ /* */
+ uint8_t unused_1;
+} __rte_packed;
+
+/* hwrm_port_phy_mdio_read_output (size:128b/16B) */
+struct hwrm_port_phy_mdio_read_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* 16-bit register data. */
+ uint16_t reg_data;
+ uint8_t unused_0[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*********************
+ * hwrm_port_led_cfg *
+ *********************/
+
+
+/* hwrm_port_led_cfg_input (size:512b/64B) */
+struct hwrm_port_led_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the led0_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_ID \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the led0_state field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_STATE \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the led0_color field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_COLOR \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the led0_blink_on field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_ON \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the led0_blink_off field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_OFF \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the led0_group_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_GROUP_ID \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the led1_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_ID \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the led1_state field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_STATE \
+ UINT32_C(0x80)
+ /*
+ * This bit must be '1' for the led1_color field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_COLOR \
+ UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the led1_blink_on field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_ON \
+ UINT32_C(0x200)
+ /*
+ * This bit must be '1' for the led1_blink_off field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_OFF \
+ UINT32_C(0x400)
+ /*
+ * This bit must be '1' for the led1_group_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_GROUP_ID \
+ UINT32_C(0x800)
+ /*
+ * This bit must be '1' for the led2_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_ID \
+ UINT32_C(0x1000)
+ /*
+ * This bit must be '1' for the led2_state field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_STATE \
+ UINT32_C(0x2000)
+ /*
+ * This bit must be '1' for the led2_color field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_COLOR \
+ UINT32_C(0x4000)
+ /*
+ * This bit must be '1' for the led2_blink_on field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_ON \
+ UINT32_C(0x8000)
+ /*
+ * This bit must be '1' for the led2_blink_off field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_OFF \
+ UINT32_C(0x10000)
+ /*
+ * This bit must be '1' for the led2_group_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_GROUP_ID \
+ UINT32_C(0x20000)
+ /*
+ * This bit must be '1' for the led3_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_ID \
+ UINT32_C(0x40000)
+ /*
+ * This bit must be '1' for the led3_state field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_STATE \
+ UINT32_C(0x80000)
+ /*
+ * This bit must be '1' for the led3_color field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_COLOR \
+ UINT32_C(0x100000)
+ /*
+ * This bit must be '1' for the led3_blink_on field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_ON \
+ UINT32_C(0x200000)
+ /*
+ * This bit must be '1' for the led3_blink_off field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_OFF \
+ UINT32_C(0x400000)
+ /*
+ * This bit must be '1' for the led3_group_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_GROUP_ID \
+ UINT32_C(0x800000)
+ /* Port ID of port whose LEDs are configured. */
+ uint16_t port_id;
+ /*
+ * The number of LEDs that are being configured.
+ * Up to 4 LEDs can be configured with this command.
+ */
+ uint8_t num_leds;
+ /* Reserved field. */
+ uint8_t rsvd;
+ /* An identifier for the LED #0. */
+ uint8_t led0_id;
+ /* The requested state of the LED #0. */
+ uint8_t led0_state;
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINKALT UINT32_C(0x4)
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_LAST \
+ HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINKALT
+ /* The requested color of LED #0. */
+ uint8_t led0_color;
+ /* Default */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREENAMBER UINT32_C(0x3)
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_LAST \
+ HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREENAMBER
+ uint8_t unused_0;
+ /*
+ * If the LED #0 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED on between cycles.
+ */
+ uint16_t led0_blink_on;
+ /*
+ * If the LED #0 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED off between cycles.
+ */
+ uint16_t led0_blink_off;
+ /*
+ * An identifier for the group of LEDs that LED #0 belongs
+ * to.
+ * If set to 0, then the LED #0 shall not be grouped and
+ * shall be treated as an individual resource.
+ * For all other non-zero values of this field, LED #0 shall
+ * be grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led0_group_id;
+ /* Reserved field. */
+ uint8_t rsvd0;
+ /* An identifier for the LED #1. */
+ uint8_t led1_id;
+ /* The requested state of the LED #1. */
+ uint8_t led1_state;
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINKALT UINT32_C(0x4)
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_LAST \
+ HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINKALT
+ /* The requested color of LED #1. */
+ uint8_t led1_color;
+ /* Default */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREENAMBER UINT32_C(0x3)
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_LAST \
+ HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREENAMBER
+ uint8_t unused_1;
+ /*
+ * If the LED #1 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED on between cycles.
+ */
+ uint16_t led1_blink_on;
+ /*
+ * If the LED #1 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED off between cycles.
+ */
+ uint16_t led1_blink_off;
+ /*
+ * An identifier for the group of LEDs that LED #1 belongs
+ * to.
+ * If set to 0, then the LED #1 shall not be grouped and
+ * shall be treated as an individual resource.
+ * For all other non-zero values of this field, LED #1 shall
+ * be grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led1_group_id;
+ /* Reserved field. */
+ uint8_t rsvd1;
+ /* An identifier for the LED #2. */
+ uint8_t led2_id;
+ /* The requested state of the LED #2. */
+ uint8_t led2_state;
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINKALT UINT32_C(0x4)
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_LAST \
+ HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINKALT
+ /* The requested color of LED #2. */
+ uint8_t led2_color;
+ /* Default */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREENAMBER UINT32_C(0x3)
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_LAST \
+ HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREENAMBER
+ uint8_t unused_2;
+ /*
+ * If the LED #2 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED on between cycles.
+ */
+ uint16_t led2_blink_on;
+ /*
+ * If the LED #2 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED off between cycles.
+ */
+ uint16_t led2_blink_off;
+ /*
+ * An identifier for the group of LEDs that LED #2 belongs
+ * to.
+ * If set to 0, then the LED #2 shall not be grouped and
+ * shall be treated as an individual resource.
+ * For all other non-zero values of this field, LED #2 shall
+ * be grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led2_group_id;
+ /* Reserved field. */
+ uint8_t rsvd2;
+ /* An identifier for the LED #3. */
+ uint8_t led3_id;
+ /* The requested state of the LED #3. */
+ uint8_t led3_state;
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINKALT UINT32_C(0x4)
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_LAST \
+ HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINKALT
+ /* The requested color of LED #3. */
+ uint8_t led3_color;
+ /* Default */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREENAMBER UINT32_C(0x3)
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_LAST \
+ HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREENAMBER
+ uint8_t unused_3;
+ /*
+ * If the LED #3 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED on between cycles.
+ */
+ uint16_t led3_blink_on;
+ /*
+ * If the LED #3 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED off between cycles.
+ */
+ uint16_t led3_blink_off;
+ /*
+ * An identifier for the group of LEDs that LED #3 belongs
+ * to.
+ * If set to 0, then the LED #3 shall not be grouped and
+ * shall be treated as an individual resource.
+ * For all other non-zero values of this field, LED #3 shall
+ * be grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led3_group_id;
+ /* Reserved field. */
+ uint8_t rsvd3;
+} __rte_packed;
+
+/* hwrm_port_led_cfg_output (size:128b/16B) */
+struct hwrm_port_led_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************
+ * hwrm_port_led_qcfg *
+ **********************/
+
+
+/* hwrm_port_led_qcfg_input (size:192b/24B) */
+struct hwrm_port_led_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port whose LED configuration is being queried. */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_port_led_qcfg_output (size:448b/56B) */
+struct hwrm_port_led_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * The number of LEDs that are configured on this port.
+ * Up to 4 LEDs can be returned in the response.
+ */
+ uint8_t num_leds;
+ /* An identifier for the LED #0. */
+ uint8_t led0_id;
+ /* The type of LED #0. */
+ uint8_t led0_type;
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_INVALID UINT32_C(0xff)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_INVALID
+ /* The current state of the LED #0. */
+ uint8_t led0_state;
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINKALT UINT32_C(0x4)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINKALT
+ /* The color of LED #0. */
+ uint8_t led0_color;
+ /* Default */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREENAMBER UINT32_C(0x3)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREENAMBER
+ uint8_t unused_0;
+ /*
+ * If the LED #0 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED on between cycles.
+ */
+ uint16_t led0_blink_on;
+ /*
+ * If the LED #0 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED off between cycles.
+ */
+ uint16_t led0_blink_off;
+ /*
+ * An identifier for the group of LEDs that LED #0 belongs
+ * to.
+ * If set to 0, then the LED #0 is not grouped.
+ * For all other non-zero values of this field, LED #0 is
+ * grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led0_group_id;
+ /* An identifier for the LED #1. */
+ uint8_t led1_id;
+ /* The type of LED #1. */
+ uint8_t led1_type;
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_INVALID UINT32_C(0xff)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_INVALID
+ /* The current state of the LED #1. */
+ uint8_t led1_state;
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINKALT UINT32_C(0x4)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINKALT
+ /* The color of LED #1. */
+ uint8_t led1_color;
+ /* Default */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREENAMBER UINT32_C(0x3)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREENAMBER
+ uint8_t unused_1;
+ /*
+ * If the LED #1 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED on between cycles.
+ */
+ uint16_t led1_blink_on;
+ /*
+ * If the LED #1 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED off between cycles.
+ */
+ uint16_t led1_blink_off;
+ /*
+ * An identifier for the group of LEDs that LED #1 belongs
+ * to.
+ * If set to 0, then the LED #1 is not grouped.
+ * For all other non-zero values of this field, LED #1 is
+ * grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led1_group_id;
+ /* An identifier for the LED #2. */
+ uint8_t led2_id;
+ /* The type of LED #2. */
+ uint8_t led2_type;
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_INVALID UINT32_C(0xff)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_INVALID
+ /* The current state of the LED #2. */
+ uint8_t led2_state;
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINKALT UINT32_C(0x4)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINKALT
+ /* The color of LED #2. */
+ uint8_t led2_color;
+ /* Default */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREENAMBER UINT32_C(0x3)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREENAMBER
+ uint8_t unused_2;
+ /*
+ * If the LED #2 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED on between cycles.
+ */
+ uint16_t led2_blink_on;
+ /*
+ * If the LED #2 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED off between cycles.
+ */
+ uint16_t led2_blink_off;
+ /*
+ * An identifier for the group of LEDs that LED #2 belongs
+ * to.
+ * If set to 0, then the LED #2 is not grouped.
+ * For all other non-zero values of this field, LED #2 is
+ * grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led2_group_id;
+ /* An identifier for the LED #3. */
+ uint8_t led3_id;
+ /* The type of LED #3. */
+ uint8_t led3_type;
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_INVALID UINT32_C(0xff)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_INVALID
+ /* The current state of the LED #3. */
+ uint8_t led3_state;
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINKALT UINT32_C(0x4)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINKALT
+ /* The color of LED #3. */
+ uint8_t led3_color;
+ /* Default */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREENAMBER UINT32_C(0x3)
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_LAST \
+ HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREENAMBER
+ uint8_t unused_3;
+ /*
+ * If the LED #3 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED on between cycles.
+ */
+ uint16_t led3_blink_on;
+ /*
+ * If the LED #3 state is "blink" or "blinkalt", then
+ * this field represents the requested time in milliseconds
+ * to keep LED off between cycles.
+ */
+ uint16_t led3_blink_off;
+ /*
+ * An identifier for the group of LEDs that LED #3 belongs
+ * to.
+ * If set to 0, then the LED #3 is not grouped.
+ * For all other non-zero values of this field, LED #3 is
+ * grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led3_group_id;
+ uint8_t unused_4[6];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***********************
+ * hwrm_port_led_qcaps *
+ ***********************/
+
+
+/* hwrm_port_led_qcaps_input (size:192b/24B) */
+struct hwrm_port_led_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port whose LED configuration is being queried. */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_port_led_qcaps_output (size:384b/48B) */
+struct hwrm_port_led_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * The number of LEDs that are configured on this port.
+ * Up to 4 LEDs can be returned in the response.
+ */
+ uint8_t num_leds;
+ /* Reserved for future use. */
+ uint8_t unused[3];
+ /* An identifier for the LED #0. */
+ uint8_t led0_id;
+ /* The type of LED #0. */
+ uint8_t led0_type;
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_INVALID UINT32_C(0xff)
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_LAST \
+ HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_INVALID
+ /*
+ * An identifier for the group of LEDs that LED #0 belongs
+ * to.
+ * If set to 0, then the LED #0 cannot be grouped.
+ * For all other non-zero values of this field, LED #0 is
+ * grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led0_group_id;
+ uint8_t unused_0;
+ /* The states supported by LED #0. */
+ uint16_t led0_state_caps;
+ /*
+ * If set to 1, this LED is enabled.
+ * If set to 0, this LED is disabled.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ENABLED \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, off state is supported on this LED.
+ * If set to 0, off state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_OFF_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, on state is supported on this LED.
+ * If set to 0, on state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ON_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, blink state is supported on this LED.
+ * If set to 0, blink state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, blink_alt state is supported on this LED.
+ * If set to 0, blink_alt state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_ALT_SUPPORTED \
+ UINT32_C(0x10)
+ /* The colors supported by LED #0. */
+ uint16_t led0_color_caps;
+ /* reserved. */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_RSVD \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, Amber color is supported on this LED.
+ * If set to 0, Amber color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_AMBER_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, Green color is supported on this LED.
+ * If set to 0, Green color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_GREEN_SUPPORTED \
+ UINT32_C(0x4)
+ /* An identifier for the LED #1. */
+ uint8_t led1_id;
+ /* The type of LED #1. */
+ uint8_t led1_type;
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_INVALID UINT32_C(0xff)
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_LAST \
+ HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_INVALID
+ /*
+ * An identifier for the group of LEDs that LED #1 belongs
+ * to.
+ * If set to 0, then the LED #0 cannot be grouped.
+ * For all other non-zero values of this field, LED #0 is
+ * grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led1_group_id;
+ uint8_t unused_1;
+ /* The states supported by LED #1. */
+ uint16_t led1_state_caps;
+ /*
+ * If set to 1, this LED is enabled.
+ * If set to 0, this LED is disabled.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ENABLED \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, off state is supported on this LED.
+ * If set to 0, off state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_OFF_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, on state is supported on this LED.
+ * If set to 0, on state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ON_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, blink state is supported on this LED.
+ * If set to 0, blink state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, blink_alt state is supported on this LED.
+ * If set to 0, blink_alt state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_ALT_SUPPORTED \
+ UINT32_C(0x10)
+ /* The colors supported by LED #1. */
+ uint16_t led1_color_caps;
+ /* reserved. */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_RSVD \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, Amber color is supported on this LED.
+ * If set to 0, Amber color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_AMBER_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, Green color is supported on this LED.
+ * If set to 0, Green color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_GREEN_SUPPORTED \
+ UINT32_C(0x4)
+ /* An identifier for the LED #2. */
+ uint8_t led2_id;
+ /* The type of LED #2. */
+ uint8_t led2_type;
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_INVALID UINT32_C(0xff)
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_LAST \
+ HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_INVALID
+ /*
+ * An identifier for the group of LEDs that LED #0 belongs
+ * to.
+ * If set to 0, then the LED #0 cannot be grouped.
+ * For all other non-zero values of this field, LED #0 is
+ * grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led2_group_id;
+ uint8_t unused_2;
+ /* The states supported by LED #2. */
+ uint16_t led2_state_caps;
+ /*
+ * If set to 1, this LED is enabled.
+ * If set to 0, this LED is disabled.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ENABLED \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, off state is supported on this LED.
+ * If set to 0, off state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_OFF_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, on state is supported on this LED.
+ * If set to 0, on state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ON_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, blink state is supported on this LED.
+ * If set to 0, blink state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, blink_alt state is supported on this LED.
+ * If set to 0, blink_alt state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_ALT_SUPPORTED \
+ UINT32_C(0x10)
+ /* The colors supported by LED #2. */
+ uint16_t led2_color_caps;
+ /* reserved. */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_RSVD \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, Amber color is supported on this LED.
+ * If set to 0, Amber color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_AMBER_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, Green color is supported on this LED.
+ * If set to 0, Green color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_GREEN_SUPPORTED \
+ UINT32_C(0x4)
+ /* An identifier for the LED #3. */
+ uint8_t led3_id;
+ /* The type of LED #3. */
+ uint8_t led3_type;
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_INVALID UINT32_C(0xff)
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_LAST \
+ HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_INVALID
+ /*
+ * An identifier for the group of LEDs that LED #3 belongs
+ * to.
+ * If set to 0, then the LED #0 cannot be grouped.
+ * For all other non-zero values of this field, LED #0 is
+ * grouped together with the LEDs with the same group ID
+ * value.
+ */
+ uint8_t led3_group_id;
+ uint8_t unused_3;
+ /* The states supported by LED #3. */
+ uint16_t led3_state_caps;
+ /*
+ * If set to 1, this LED is enabled.
+ * If set to 0, this LED is disabled.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ENABLED \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, off state is supported on this LED.
+ * If set to 0, off state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_OFF_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, on state is supported on this LED.
+ * If set to 0, on state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ON_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, blink state is supported on this LED.
+ * If set to 0, blink state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, blink_alt state is supported on this LED.
+ * If set to 0, blink_alt state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_ALT_SUPPORTED \
+ UINT32_C(0x10)
+ /* The colors supported by LED #3. */
+ uint16_t led3_color_caps;
+ /* reserved. */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_RSVD \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, Amber color is supported on this LED.
+ * If set to 0, Amber color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_AMBER_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, Green color is supported on this LED.
+ * If set to 0, Green color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_GREEN_SUPPORTED \
+ UINT32_C(0x4)
+ uint8_t unused_4[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***********************
+ * hwrm_port_prbs_test *
+ ***********************/
+
+
+/* hwrm_port_prbs_test_input (size:384b/48B) */
+struct hwrm_port_prbs_test_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Host address data is to DMA'd to. */
+ uint64_t resp_data_addr;
+ /*
+ * Size of the buffer pointed to by resp_data_addr. The firmware may
+ * use this entire buffer or less than the entire buffer, but never more.
+ */
+ uint16_t data_len;
+ uint16_t unused_0;
+ uint32_t unused_1;
+ /* Port ID of port where PRBS test to be run. */
+ uint16_t port_id;
+ /* Polynomial selection for PRBS test. */
+ uint16_t poly;
+ /* PRBS7 */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS7 UINT32_C(0x0)
+ /* PRBS9 */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS9 UINT32_C(0x1)
+ /* PRBS11 */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS11 UINT32_C(0x2)
+ /* PRBS15 */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS15 UINT32_C(0x3)
+ /* PRBS23 */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS23 UINT32_C(0x4)
+ /* PRBS31 */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS31 UINT32_C(0x5)
+ /* PRBS58 */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS58 UINT32_C(0x6)
+ /* Invalid */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_INVALID UINT32_C(0xff)
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_LAST \
+ HWRM_PORT_PRBS_TEST_INPUT_POLY_INVALID
+ /*
+ * Configuration bits for PRBS test.
+ * Use enable bit to start/stop test.
+ * Use tx/rx lane map bits to run test on specific lanes,
+ * if set to 0 test will be run on all lanes.
+ */
+ uint16_t prbs_config;
+ /*
+ * Set 0 to stop test currently in progress
+ * Set 1 to start test with configuration provided.
+ */
+ #define HWRM_PORT_PRBS_TEST_INPUT_PRBS_CONFIG_START_STOP \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, tx_lane_map bitmap should have lane bits set.
+ * If set to 0, test will be run on all lanes for this port.
+ */
+ #define HWRM_PORT_PRBS_TEST_INPUT_PRBS_CONFIG_TX_LANE_MAP_VALID \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, rx_lane_map bitmap should have lane bits set.
+ * If set to 0, test will be run on all lanes for this port.
+ */
+ #define HWRM_PORT_PRBS_TEST_INPUT_PRBS_CONFIG_RX_LANE_MAP_VALID \
+ UINT32_C(0x4)
+ /* Duration in seconds to run the PRBS test. */
+ uint16_t timeout;
+ /*
+ * If tx_lane_map_valid is set to 1, this field is a bitmap
+ * of tx lanes to run PRBS test. bit0 = lane0,
+ * bit1 = lane1 ..bit31 = lane31
+ */
+ uint32_t tx_lane_map;
+ /*
+ * If rx_lane_map_valid is set to 1, this field is a bitmap
+ * of rx lanes to run PRBS test. bit0 = lane0,
+ * bit1 = lane1 ..bit31 = lane31
+ */
+ uint32_t rx_lane_map;
+} __rte_packed;
+
+/* hwrm_port_prbs_test_output (size:128b/16B) */
+struct hwrm_port_prbs_test_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Total length of stored data. */
+ uint16_t total_data_len;
+ uint16_t unused_0;
+ uint8_t unused_1[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************
+ * hwrm_port_dsc_dump *
+ **********************/
+
+
+/* hwrm_port_dsc_dump_input (size:320b/40B) */
+struct hwrm_port_dsc_dump_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Host address where response diagnostic data is returned. */
+ uint64_t resp_data_addr;
+ /*
+ * Size of the buffer pointed to by resp_data_addr. The firmware
+ * may use this entire buffer or less than the entire buffer, but
+ * never more.
+ */
+ uint16_t data_len;
+ uint16_t unused_0;
+ uint32_t unused_1;
+ /* Port ID of port where dsc dump to be collected. */
+ uint16_t port_id;
+ /* Diag level specified by the user */
+ uint16_t diag_level;
+ /* SRDS_DIAG_LANE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_LANE \
+ UINT32_C(0x0)
+ /* SRDS_DIAG_CORE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_CORE \
+ UINT32_C(0x1)
+ /* SRDS_DIAG_EVENT */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_EVENT \
+ UINT32_C(0x2)
+ /* SRDS_DIAG_EYE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_EYE \
+ UINT32_C(0x3)
+ /* SRDS_DIAG_REG_CORE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_REG_CORE \
+ UINT32_C(0x4)
+ /* SRDS_DIAG_REG_LANE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_REG_LANE \
+ UINT32_C(0x5)
+ /* SRDS_DIAG_UC_CORE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_UC_CORE \
+ UINT32_C(0x6)
+ /* SRDS_DIAG_UC_LANE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_UC_LANE \
+ UINT32_C(0x7)
+ /* SRDS_DIAG_LANE_DEBUG */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_LANE_DEBUG \
+ UINT32_C(0x8)
+ /* SRDS_DIAG_BER_VERT */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_BER_VERT \
+ UINT32_C(0x9)
+ /* SRDS_DIAG_BER_HORZ */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_BER_HORZ \
+ UINT32_C(0xa)
+ /* SRDS_DIAG_EVENT_SAFE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_EVENT_SAFE \
+ UINT32_C(0xb)
+ /* SRDS_DIAG_TIMESTAMP */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_TIMESTAMP \
+ UINT32_C(0xc)
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_LAST \
+ HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_TIMESTAMP
+ /*
+ * This field is a lane number
+ * on which to collect the dsc dump
+ */
+ uint16_t lane_number;
+ /*
+ * Configuration bits.
+ * Use enable bit to start dsc dump or retrieve dump
+ */
+ uint16_t dsc_dump_config;
+ /*
+ * Set 0 to retrieve the dsc dump
+ * Set 1 to start the dsc dump
+ */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DSC_DUMP_CONFIG_START_RETRIEVE \
+ UINT32_C(0x1)
+} __rte_packed;
+
+/* hwrm_port_dsc_dump_output (size:128b/16B) */
+struct hwrm_port_dsc_dump_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Total length of stored data. */
+ uint16_t total_data_len;
+ uint16_t unused_0;
+ uint8_t unused_1[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************************
+ * hwrm_port_sfp_sideband_cfg *
+ ******************************/
+
+
+/* hwrm_port_sfp_sideband_cfg_input (size:256b/32B) */
+struct hwrm_port_sfp_sideband_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port that is to be queried. */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+ /*
+ * This bitfield is used to specify which bits from the 'flags'
+ * fields are being configured by the caller.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for rs0 to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_RS0 \
+ UINT32_C(0x1)
+ /* This bit must be '1' for rs1 to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_RS1 \
+ UINT32_C(0x2)
+ /* This bit must be '1' for tx_disable to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_TX_DIS \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for mod_sel to be configured.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_MOD_SEL \
+ UINT32_C(0x8)
+ /* This bit must be '1' for reset_l to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_RESET_L \
+ UINT32_C(0x10)
+ /* This bit must be '1' for lp_mode to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_LP_MODE \
+ UINT32_C(0x20)
+ /* This bit must be '1' for pwr_disable to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_PWR_DIS \
+ UINT32_C(0x40)
+ /*
+ * Only bits that have corresponding bits in the 'enables'
+ * bitfield are processed by the firmware, all other bits
+ * of 'flags' are ignored.
+ */
+ uint32_t flags;
+ /*
+ * This bit along with rs1 configures the current speed of the dual
+ * rate module. If these pins are GNDed then the speed can be changed
+ * by driectly writing to EEPROM.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_RS0 \
+ UINT32_C(0x1)
+ /*
+ * This bit along with rs0 configures the current speed of the dual
+ * rate module. If these pins are GNDed then the speed can be changed
+ * by driectly writing to EEPROM.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_RS1 \
+ UINT32_C(0x2)
+ /*
+ * When this bit is set to '1', tx_disable is set.
+ * On a 1G BASE-T module, if this bit is set,
+ * module PHY registers will not be accessible.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_TX_DIS \
+ UINT32_C(0x4)
+ /*
+ * When this bit is set to '1', this module is selected.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_MOD_SEL \
+ UINT32_C(0x8)
+ /*
+ * If reset_l is set to 0, Module will be taken out of reset
+ * and other signals will be set to their requested state once
+ * the module is out of reset.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_RESET_L \
+ UINT32_C(0x10)
+ /*
+ * When this bit is set to '1', the module will be configured
+ * in low power mode.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_LP_MODE \
+ UINT32_C(0x20)
+ /* When this bit is set to '1', the module will be powered down. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_PWR_DIS \
+ UINT32_C(0x40)
+} __rte_packed;
+
+/* hwrm_port_sfp_sideband_cfg_output (size:128b/16B) */
+struct hwrm_port_sfp_sideband_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written. When
+ * writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************************
+ * hwrm_port_sfp_sideband_qcfg *
+ *******************************/
+
+
+/* hwrm_port_sfp_sideband_qcfg_input (size:192b/24B) */
+struct hwrm_port_sfp_sideband_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port that is to be queried. */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_port_sfp_sideband_qcfg_output (size:192b/24B) */
+struct hwrm_port_sfp_sideband_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * Bitmask indicating which sideband signals are valid.
+ * This is based on the board and nvm cfg that is present on the board.
+ */
+ uint32_t supported_mask;
+ uint32_t sideband_signals;
+ /* When this bit is set to '1', the Module is absent. */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_MOD_ABS \
+ UINT32_C(0x1)
+ /*
+ * When this bit is set to '1', there is no valid signal on RX.
+ * This signal is a filtered version of Signal Detect.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RX_LOS \
+ UINT32_C(0x2)
+ /*
+ * This bit along with rs1 indiactes the current speed of the dual
+ * rate module.If these pins are grounded then the speed can be
+ * changed by driectky writing to EEPROM.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RS0 \
+ UINT32_C(0x4)
+ /*
+ * This bit along with rs0 indiactes the current speed of the dual
+ * rate module.If these pins are grounded then the speed can be
+ * changed by driectky writing to EEPROM.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RS1 \
+ UINT32_C(0x8)
+ /*
+ * When this bit is set to '1', tx_disable is set.
+ * On a 1G BASE-T module, if this bit is set, module PHY
+ * registers will not be accessible.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_TX_DIS \
+ UINT32_C(0x10)
+ /* When this bit is set to '1', tx_fault is set. */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_TX_FAULT \
+ UINT32_C(0x20)
+ /*
+ * When this bit is set to '1', module is selected.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_MOD_SEL \
+ UINT32_C(0x40)
+ /*
+ * When this bit is set to '0', the module is held in reset.
+ * if reset_l is set to 1,first module is taken out of reset
+ * and other signals will be set to their requested state.
+ * Valid only on QSFP modules.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RESET_L \
+ UINT32_C(0x80)
+ /*
+ * When this bit is set to '1', the module is in low power mode.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_LP_MODE \
+ UINT32_C(0x100)
+ /* When this bit is set to '1', module is in power down state. */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_PWR_DIS \
+ UINT32_C(0x200)
+ uint8_t unused[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written. When
+ * writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************************
+ * hwrm_port_phy_mdio_bus_acquire *
+ **********************************/
+
+
+/* hwrm_port_phy_mdio_bus_acquire_input (size:192b/24B) */
+struct hwrm_port_phy_mdio_bus_acquire_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of the port. */
+ uint16_t port_id;
+ /*
+ * client_id of the client requesting BUS access.
+ * Any value from 0x10 to 0xFFFF can be used.
+ * Client should make sure that the returned client_id
+ * in response matches the client_id in request.
+ * 0-0xF are reserved for internal use.
+ */
+ uint16_t client_id;
+ /*
+ * Timeout in milli seconds, MDIO BUS will be released automatically
+ * after this time, if another mdio acquire command is not received
+ * within the timeout window from the same client.
+ * A 0xFFFF will hold the bus until this bus is released.
+ */
+ uint16_t mdio_bus_timeout;
+ uint8_t unused_0[2];
+} __rte_packed;
+
+/* hwrm_port_phy_mdio_bus_acquire_output (size:128b/16B) */
+struct hwrm_port_phy_mdio_bus_acquire_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint16_t unused_0;
+ /*
+ * client_id of the module holding the BUS.
+ * 0-0xF are reserved for internal use.
+ */
+ uint16_t client_id;
+ uint8_t unused_1[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************************
+ * hwrm_port_phy_mdio_bus_release *
+ **********************************/
+
+
+/* hwrm_port_phy_mdio_bus_release_input (size:192b/24B) */
+struct hwrm_port_phy_mdio_bus_release_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of the port. */
+ uint16_t port_id;
+ /*
+ * client_id of the client requesting BUS release.
+ * A client should not release any other clients BUS.
+ */
+ uint16_t client_id;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_port_phy_mdio_bus_release_output (size:128b/16B) */
+struct hwrm_port_phy_mdio_bus_release_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint16_t unused_0;
+ /* The BUS is released if client_id matches the client_id in request. */
+ uint16_t clients_id;
+ uint8_t unused_1[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***********************
+ * hwrm_queue_qportcfg *
+ ***********************/
+
+
+/* hwrm_queue_qportcfg_input (size:192b/24B) */
+struct hwrm_queue_qportcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_LAST \
+ HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX
+ /*
+ * Port ID of port for which the queue configuration is being
+ * queried. This field is only required when sent by IPC.
+ */
+ uint16_t port_id;
+ /*
+ * Drivers will set this capability when it can use
+ * queue_idx_service_profile to map the queues to application.
+ */
+ uint8_t drv_qmap_cap;
+ /* disabled */
+ #define HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_DISABLED UINT32_C(0x0)
+ /* enabled */
+ #define HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_ENABLED UINT32_C(0x1)
+ #define HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_LAST \
+ HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_ENABLED
+ uint8_t unused_0;
+} __rte_packed;
+
+/* hwrm_queue_qportcfg_output (size:256b/32B) */
+struct hwrm_queue_qportcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * The maximum number of queues that can be configured on this
+ * port.
+ * Valid values range from 1 through 8.
+ */
+ uint8_t max_configurable_queues;
+ /*
+ * The maximum number of lossless queues that can be configured
+ * on this port.
+ * Valid values range from 0 through 8.
+ */
+ uint8_t max_configurable_lossless_queues;
+ /*
+ * Bitmask indicating which queues can be configured by the
+ * hwrm_queue_cfg command.
+ *
+ * Each bit represents a specific queue where bit 0 represents
+ * queue 0 and bit 7 represents queue 7.
+ * # A value of 0 indicates that the queue is not configurable
+ * by the hwrm_queue_cfg command.
+ * # A value of 1 indicates that the queue is configurable.
+ * # A hwrm_queue_cfg command shall return error when trying to
+ * configure a queue not configurable.
+ */
+ uint8_t queue_cfg_allowed;
+ /* Information about queue configuration. */
+ uint8_t queue_cfg_info;
+ /*
+ * If this flag is set to '1', then the queues are
+ * configured asymmetrically on TX and RX sides.
+ * If this flag is set to '0', then the queues are
+ * configured symmetrically on TX and RX sides. For
+ * symmetric configuration, the queue configuration
+ * including queue ids and service profiles on the
+ * TX side is the same as the corresponding queue
+ * configuration on the RX side.
+ */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG \
+ UINT32_C(0x1)
+ /*
+ * Bitmask indicating which queues can be configured by the
+ * hwrm_queue_pfcenable_cfg command.
+ *
+ * Each bit represents a specific priority where bit 0 represents
+ * priority 0 and bit 7 represents priority 7.
+ * # A value of 0 indicates that the priority is not configurable by
+ * the hwrm_queue_pfcenable_cfg command.
+ * # A value of 1 indicates that the priority is configurable.
+ * # A hwrm_queue_pfcenable_cfg command shall return error when
+ * trying to configure a priority that is not configurable.
+ */
+ uint8_t queue_pfcenable_cfg_allowed;
+ /*
+ * Bitmask indicating which queues can be configured by the
+ * hwrm_queue_pri2cos_cfg command.
+ *
+ * Each bit represents a specific queue where bit 0 represents
+ * queue 0 and bit 7 represents queue 7.
+ * # A value of 0 indicates that the queue is not configurable
+ * by the hwrm_queue_pri2cos_cfg command.
+ * # A value of 1 indicates that the queue is configurable.
+ * # A hwrm_queue_pri2cos_cfg command shall return error when
+ * trying to configure a queue that is not configurable.
+ */
+ uint8_t queue_pri2cos_cfg_allowed;
+ /*
+ * Bitmask indicating which queues can be configured by the
+ * hwrm_queue_pri2cos_cfg command.
+ *
+ * Each bit represents a specific queue where bit 0 represents
+ * queue 0 and bit 7 represents queue 7.
+ * # A value of 0 indicates that the queue is not configurable
+ * by the hwrm_queue_pri2cos_cfg command.
+ * # A value of 1 indicates that the queue is configurable.
+ * # A hwrm_queue_pri2cos_cfg command shall return error when
+ * trying to configure a queue not configurable.
+ */
+ uint8_t queue_cos2bw_cfg_allowed;
+ /*
+ * ID of CoS Queue 0.
+ * FF - Invalid id
+ *
+ * # This ID can be used on any subsequent call to an hwrm command
+ * that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software.
+ * # Any driver or software should not make any assumptions about
+ * queue IDs.
+ * # A value of 0xff indicates that the queue is not available.
+ * # Available queues may not be in sequential order.
+ */
+ uint8_t queue_id0;
+ /* This value is applicable to CoS queues only. */
+ uint8_t queue_id0_service_profile;
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless (legacy) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /* Lossless RoCE */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS_ROCE \
+ UINT32_C(0x1)
+ /* Lossy RoCE CNP */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY_ROCE_CNP \
+ UINT32_C(0x2)
+ /* Lossless NIC */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS_NIC \
+ UINT32_C(0x3)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LAST \
+ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_UNKNOWN
+ /*
+ * ID of CoS Queue 1.
+ * FF - Invalid id
+ *
+ * # This ID can be used on any subsequent call to an hwrm command
+ * that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software.
+ * # Any driver or software should not make any assumptions about
+ * queue IDs.
+ * # A value of 0xff indicates that the queue is not available.
+ * # Available queues may not be in sequential order.
+ */
+ uint8_t queue_id1;
+ /* This value is applicable to CoS queues only. */
+ uint8_t queue_id1_service_profile;
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless (legacy) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /* Lossless RoCE */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS_ROCE \
+ UINT32_C(0x1)
+ /* Lossy RoCE CNP */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSY_ROCE_CNP \
+ UINT32_C(0x2)
+ /* Lossless NIC */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS_NIC \
+ UINT32_C(0x3)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LAST \
+ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_UNKNOWN
+ /*
+ * ID of CoS Queue 2.
+ * FF - Invalid id
+ *
+ * # This ID can be used on any subsequent call to an hwrm command
+ * that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software.
+ * # Any driver or software should not make any assumptions about
+ * queue IDs.
+ * # A value of 0xff indicates that the queue is not available.
+ * # Available queues may not be in sequential order.
+ */
+ uint8_t queue_id2;
+ /* This value is applicable to CoS queues only. */
+ uint8_t queue_id2_service_profile;
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless (legacy) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /* Lossless RoCE */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS_ROCE \
+ UINT32_C(0x1)
+ /* Lossy RoCE CNP */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSY_ROCE_CNP \
+ UINT32_C(0x2)
+ /* Lossless NIC */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS_NIC \
+ UINT32_C(0x3)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LAST \
+ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_UNKNOWN
+ /*
+ * ID of CoS Queue 3.
+ * FF - Invalid id
+ *
+ * # This ID can be used on any subsequent call to an hwrm command
+ * that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software.
+ * # Any driver or software should not make any assumptions about
+ * queue IDs.
+ * # A value of 0xff indicates that the queue is not available.
+ * # Available queues may not be in sequential order.
+ */
+ uint8_t queue_id3;
+ /* This value is applicable to CoS queues only. */
+ uint8_t queue_id3_service_profile;
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless (legacy) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /* Lossless RoCE */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS_ROCE \
+ UINT32_C(0x1)
+ /* Lossy RoCE CNP */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSY_ROCE_CNP \
+ UINT32_C(0x2)
+ /* Lossless NIC */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS_NIC \
+ UINT32_C(0x3)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LAST \
+ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_UNKNOWN
+ /*
+ * ID of CoS Queue 4.
+ * FF - Invalid id
+ *
+ * # This ID can be used on any subsequent call to an hwrm command
+ * that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software.
+ * # Any driver or software should not make any assumptions about
+ * queue IDs.
+ * # A value of 0xff indicates that the queue is not available.
+ * # Available queues may not be in sequential order.
+ */
+ uint8_t queue_id4;
+ /* This value is applicable to CoS queues only. */
+ uint8_t queue_id4_service_profile;
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless (legacy) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /* Lossless RoCE */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS_ROCE \
+ UINT32_C(0x1)
+ /* Lossy RoCE CNP */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSY_ROCE_CNP \
+ UINT32_C(0x2)
+ /* Lossless NIC */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS_NIC \
+ UINT32_C(0x3)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LAST \
+ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_UNKNOWN
+ /*
+ * ID of CoS Queue 5.
+ * FF - Invalid id
+ *
+ * # This ID can be used on any subsequent call to an hwrm command
+ * that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software.
+ * # Any driver or software should not make any assumptions about
+ * queue IDs.
+ * # A value of 0xff indicates that the queue is not available.
+ * # Available queues may not be in sequential order.
+ */
+ uint8_t queue_id5;
+ /* This value is applicable to CoS queues only. */
+ uint8_t queue_id5_service_profile;
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless (legacy) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /* Lossless RoCE */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS_ROCE \
+ UINT32_C(0x1)
+ /* Lossy RoCE CNP */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSY_ROCE_CNP \
+ UINT32_C(0x2)
+ /* Lossless NIC */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS_NIC \
+ UINT32_C(0x3)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LAST \
+ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_UNKNOWN
+ /*
+ * ID of CoS Queue 6.
+ * FF - Invalid id
+ *
+ * # This ID can be used on any subsequent call to an hwrm command
+ * that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software.
+ * # Any driver or software should not make any assumptions about
+ * queue IDs.
+ * # A value of 0xff indicates that the queue is not available.
+ * # Available queues may not be in sequential order.
+ */
+ uint8_t queue_id6;
+ /* This value is applicable to CoS queues only. */
+ uint8_t queue_id6_service_profile;
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless (legacy) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /* Lossless RoCE */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS_ROCE \
+ UINT32_C(0x1)
+ /* Lossy RoCE CNP */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSY_ROCE_CNP \
+ UINT32_C(0x2)
+ /* Lossless NIC */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS_NIC \
+ UINT32_C(0x3)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LAST \
+ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_UNKNOWN
+ /*
+ * ID of CoS Queue 7.
+ * FF - Invalid id
+ *
+ * # This ID can be used on any subsequent call to an hwrm command
+ * that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software.
+ * # Any driver or software should not make any assumptions about
+ * queue IDs.
+ * # A value of 0xff indicates that the queue is not available.
+ * # Available queues may not be in sequential order.
+ */
+ uint8_t queue_id7;
+ /* This value is applicable to CoS queues only. */
+ uint8_t queue_id7_service_profile;
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless (legacy) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /* Lossless RoCE */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS_ROCE \
+ UINT32_C(0x1)
+ /* Lossy RoCE CNP */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSY_ROCE_CNP \
+ UINT32_C(0x2)
+ /* Lossless NIC */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS_NIC \
+ UINT32_C(0x3)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LAST \
+ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************
+ * hwrm_queue_qcfg *
+ *******************/
+
+
+/* hwrm_queue_qcfg_input (size:192b/24B) */
+struct hwrm_queue_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_LAST \
+ HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_RX
+ /* Queue ID of the queue. */
+ uint32_t queue_id;
+} __rte_packed;
+
+/* hwrm_queue_qcfg_output (size:128b/16B) */
+struct hwrm_queue_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * This value is the estimate packet length used in the
+ * TX arbiter.
+ */
+ uint32_t queue_len;
+ /* This value is applicable to CoS queues only. */
+ uint8_t service_profile;
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_LOSSY UINT32_C(0x0)
+ /* Lossless */
+ #define HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_LOSSLESS UINT32_C(0x1)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_UNKNOWN UINT32_C(0xff)
+ #define HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_LAST \
+ HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_UNKNOWN
+ /* Information about queue configuration. */
+ uint8_t queue_cfg_info;
+ /*
+ * If this flag is set to '1', then the queue is
+ * configured asymmetrically on TX and RX sides.
+ * If this flag is set to '0', then this queue is
+ * configured symmetrically on TX and RX sides.
+ */
+ #define HWRM_QUEUE_QCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG \
+ UINT32_C(0x1)
+ uint8_t unused_0;
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************
+ * hwrm_queue_cfg *
+ ******************/
+
+
+/* hwrm_queue_cfg_input (size:320b/40B) */
+struct hwrm_queue_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX, or both directions applicable to the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_MASK UINT32_C(0x3)
+ #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_SFT 0
+ /* tx path */
+ #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ /* Bi-directional (Symmetrically applicable to TX and RX paths) */
+ #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_BIDIR UINT32_C(0x2)
+ #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_LAST \
+ HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_BIDIR
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the dflt_len field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_CFG_INPUT_ENABLES_DFLT_LEN UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the service_profile field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_CFG_INPUT_ENABLES_SERVICE_PROFILE UINT32_C(0x2)
+ /* Queue ID of queue that is to be configured by this function. */
+ uint32_t queue_id;
+ /*
+ * This value is a the estimate packet length used in the
+ * TX arbiter.
+ * Set to 0xFF... (All Fs) to not adjust this value.
+ */
+ uint32_t dflt_len;
+ /* This value is applicable to CoS queues only. */
+ uint8_t service_profile;
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_LOSSY UINT32_C(0x0)
+ /* Lossless */
+ #define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_LOSSLESS UINT32_C(0x1)
+ /* Set to 0xFF... (All Fs) if there is no service profile specified */
+ #define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_UNKNOWN UINT32_C(0xff)
+ #define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_LAST \
+ HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_UNKNOWN
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/* hwrm_queue_cfg_output (size:128b/16B) */
+struct hwrm_queue_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*****************************
+ * hwrm_queue_pfcenable_qcfg *
+ *****************************/
+
+
+/* hwrm_queue_pfcenable_qcfg_input (size:192b/24B) */
+struct hwrm_queue_pfcenable_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure pri2cos mapping on this port.
+ */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_queue_pfcenable_qcfg_output (size:128b/16B) */
+struct hwrm_queue_pfcenable_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t flags;
+ /* If set to 1, then PFC is enabled on PRI 0. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI0_PFC_ENABLED \
+ UINT32_C(0x1)
+ /* If set to 1, then PFC is enabled on PRI 1. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI1_PFC_ENABLED \
+ UINT32_C(0x2)
+ /* If set to 1, then PFC is enabled on PRI 2. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI2_PFC_ENABLED \
+ UINT32_C(0x4)
+ /* If set to 1, then PFC is enabled on PRI 3. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI3_PFC_ENABLED \
+ UINT32_C(0x8)
+ /* If set to 1, then PFC is enabled on PRI 4. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI4_PFC_ENABLED \
+ UINT32_C(0x10)
+ /* If set to 1, then PFC is enabled on PRI 5. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI5_PFC_ENABLED \
+ UINT32_C(0x20)
+ /* If set to 1, then PFC is enabled on PRI 6. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI6_PFC_ENABLED \
+ UINT32_C(0x40)
+ /* If set to 1, then PFC is enabled on PRI 7. */
+ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI7_PFC_ENABLED \
+ UINT32_C(0x80)
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/****************************
+ * hwrm_queue_pfcenable_cfg *
+ ****************************/
+
+
+/* hwrm_queue_pfcenable_cfg_input (size:192b/24B) */
+struct hwrm_queue_pfcenable_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /* If set to 1, then PFC is requested to be enabled on PRI 0. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI0_PFC_ENABLED \
+ UINT32_C(0x1)
+ /* If set to 1, then PFC is requested to be enabled on PRI 1. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI1_PFC_ENABLED \
+ UINT32_C(0x2)
+ /* If set to 1, then PFC is requested to be enabled on PRI 2. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI2_PFC_ENABLED \
+ UINT32_C(0x4)
+ /* If set to 1, then PFC is requested to be enabled on PRI 3. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI3_PFC_ENABLED \
+ UINT32_C(0x8)
+ /* If set to 1, then PFC is requested to be enabled on PRI 4. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI4_PFC_ENABLED \
+ UINT32_C(0x10)
+ /* If set to 1, then PFC is requested to be enabled on PRI 5. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI5_PFC_ENABLED \
+ UINT32_C(0x20)
+ /* If set to 1, then PFC is requested to be enabled on PRI 6. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI6_PFC_ENABLED \
+ UINT32_C(0x40)
+ /* If set to 1, then PFC is requested to be enabled on PRI 7. */
+ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI7_PFC_ENABLED \
+ UINT32_C(0x80)
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure pri2cos mapping on this port.
+ */
+ uint16_t port_id;
+ uint8_t unused_0[2];
+} __rte_packed;
+
+/* hwrm_queue_pfcenable_cfg_output (size:128b/16B) */
+struct hwrm_queue_pfcenable_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***************************
+ * hwrm_queue_pri2cos_qcfg *
+ ***************************/
+
+
+/* hwrm_queue_pri2cos_qcfg_input (size:192b/24B) */
+struct hwrm_queue_pri2cos_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_LAST \
+ HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_RX
+ /*
+ * When this bit is set to '0', the query is
+ * for PRI from tunnel headers.
+ * When this bit is set to '1', the query is
+ * for PRI from inner packet headers.
+ */
+ #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_IVLAN UINT32_C(0x2)
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure pri2cos mapping on this port.
+ */
+ uint8_t port_id;
+ uint8_t unused_0[3];
+} __rte_packed;
+
+/* hwrm_queue_pri2cos_qcfg_output (size:192b/24B) */
+struct hwrm_queue_pri2cos_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * CoS Queue assigned to priority 0. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no CoS queue is assigned to the
+ * specified priority.
+ */
+ uint8_t pri0_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 1. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no CoS queue is assigned to the
+ * specified priority.
+ */
+ uint8_t pri1_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 2. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no CoS queue is assigned to the
+ * specified priority.
+ */
+ uint8_t pri2_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 3. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no CoS queue is assigned to the
+ * specified priority.
+ */
+ uint8_t pri3_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 4. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no CoS queue is assigned to the
+ * specified priority.
+ */
+ uint8_t pri4_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 5. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no CoS queue is assigned to the
+ * specified priority.
+ */
+ uint8_t pri5_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 6. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no CoS queue is assigned to the
+ * specified priority.
+ */
+ uint8_t pri6_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 7. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no CoS queue is assigned to the
+ * specified priority.
+ */
+ uint8_t pri7_cos_queue_id;
+ /* Information about queue configuration. */
+ uint8_t queue_cfg_info;
+ /*
+ * If this flag is set to '1', then the PRI to CoS
+ * configuration is asymmetric on TX and RX sides.
+ * If this flag is set to '0', then PRI to CoS configuration
+ * is symmetric on TX and RX sides.
+ */
+ #define HWRM_QUEUE_PRI2COS_QCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG \
+ UINT32_C(0x1)
+ uint8_t unused_0[6];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**************************
+ * hwrm_queue_pri2cos_cfg *
+ **************************/
+
+
+/* hwrm_queue_pri2cos_cfg_input (size:320b/40B) */
+struct hwrm_queue_pri2cos_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX, or both directions applicable to the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_MASK UINT32_C(0x3)
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_SFT 0
+ /* tx path */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ /* Bi-directional (Symmetrically applicable to TX and RX paths) */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_BIDIR UINT32_C(0x2)
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_LAST \
+ HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_BIDIR
+ /*
+ * When this bit is set to '0', the mapping is requested
+ * for PRI from tunnel headers.
+ * When this bit is set to '1', the mapping is requested
+ * for PRI from inner packet headers.
+ */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_IVLAN UINT32_C(0x4)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the pri0_cos_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI0_COS_QUEUE_ID \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the pri1_cos_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI1_COS_QUEUE_ID \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the pri2_cos_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI2_COS_QUEUE_ID \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the pri3_cos_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI3_COS_QUEUE_ID \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the pri4_cos_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI4_COS_QUEUE_ID \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the pri5_cos_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI5_COS_QUEUE_ID \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the pri6_cos_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI6_COS_QUEUE_ID \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the pri7_cos_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI7_COS_QUEUE_ID \
+ UINT32_C(0x80)
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure pri2cos mapping on this port.
+ */
+ uint8_t port_id;
+ /*
+ * CoS Queue assigned to priority 0. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t pri0_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 1. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t pri1_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 2 This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t pri2_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 3. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t pri3_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 4. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t pri4_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 5. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t pri5_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 6. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t pri6_cos_queue_id;
+ /*
+ * CoS Queue assigned to priority 7. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t pri7_cos_queue_id;
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/* hwrm_queue_pri2cos_cfg_output (size:128b/16B) */
+struct hwrm_queue_pri2cos_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**************************
+ * hwrm_queue_cos2bw_qcfg *
+ **************************/
+
+
+/* hwrm_queue_cos2bw_qcfg_input (size:192b/24B) */
+struct hwrm_queue_cos2bw_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure TC BW assignment on this port.
+ */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_queue_cos2bw_qcfg_output (size:896b/112B) */
+struct hwrm_queue_cos2bw_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* ID of CoS Queue 0. */
+ uint8_t queue_id0;
+ uint8_t unused_0;
+ uint16_t unused_1;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id0_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id0_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id0_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id0_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id0_bw_weight;
+ /* ID of CoS Queue 1. */
+ uint8_t queue_id1;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id1_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id1_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id1_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id1_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id1_bw_weight;
+ /* ID of CoS Queue 2. */
+ uint8_t queue_id2;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id2_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id2_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id2_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id2_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id2_bw_weight;
+ /* ID of CoS Queue 3. */
+ uint8_t queue_id3;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id3_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id3_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id3_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id3_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id3_bw_weight;
+ /* ID of CoS Queue 4. */
+ uint8_t queue_id4;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id4_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id4_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id4_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id4_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id4_bw_weight;
+ /* ID of CoS Queue 5. */
+ uint8_t queue_id5;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id5_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id5_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id5_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id5_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id5_bw_weight;
+ /* ID of CoS Queue 6. */
+ uint8_t queue_id6;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id6_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id6_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id6_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id6_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id6_bw_weight;
+ /* ID of CoS Queue 7. */
+ uint8_t queue_id7;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id7_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id7_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id7_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id7_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id7_bw_weight;
+ uint8_t unused_2[4];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*************************
+ * hwrm_queue_cos2bw_cfg *
+ *************************/
+
+
+/* hwrm_queue_cos2bw_cfg_input (size:1024b/128B) */
+struct hwrm_queue_cos2bw_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ uint32_t enables;
+ /*
+ * If this bit is set to 1, then all queue_id0 related
+ * parameters in this command are valid.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID0_VALID \
+ UINT32_C(0x1)
+ /*
+ * If this bit is set to 1, then all queue_id1 related
+ * parameters in this command are valid.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID1_VALID \
+ UINT32_C(0x2)
+ /*
+ * If this bit is set to 1, then all queue_id2 related
+ * parameters in this command are valid.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID2_VALID \
+ UINT32_C(0x4)
+ /*
+ * If this bit is set to 1, then all queue_id3 related
+ * parameters in this command are valid.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID3_VALID \
+ UINT32_C(0x8)
+ /*
+ * If this bit is set to 1, then all queue_id4 related
+ * parameters in this command are valid.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID4_VALID \
+ UINT32_C(0x10)
+ /*
+ * If this bit is set to 1, then all queue_id5 related
+ * parameters in this command are valid.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID5_VALID \
+ UINT32_C(0x20)
+ /*
+ * If this bit is set to 1, then all queue_id6 related
+ * parameters in this command are valid.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID6_VALID \
+ UINT32_C(0x40)
+ /*
+ * If this bit is set to 1, then all queue_id7 related
+ * parameters in this command are valid.
+ */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID7_VALID \
+ UINT32_C(0x80)
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure TC BW assignment on this port.
+ */
+ uint16_t port_id;
+ /* ID of CoS Queue 0. */
+ uint8_t queue_id0;
+ uint8_t unused_0;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id0_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id0_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id0_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id0_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id0_bw_weight;
+ /* ID of CoS Queue 1. */
+ uint8_t queue_id1;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id1_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id1_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id1_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id1_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id1_bw_weight;
+ /* ID of CoS Queue 2. */
+ uint8_t queue_id2;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id2_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id2_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id2_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id2_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id2_bw_weight;
+ /* ID of CoS Queue 3. */
+ uint8_t queue_id3;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id3_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id3_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id3_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id3_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id3_bw_weight;
+ /* ID of CoS Queue 4. */
+ uint8_t queue_id4;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id4_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id4_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id4_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id4_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id4_bw_weight;
+ /* ID of CoS Queue 5. */
+ uint8_t queue_id5;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id5_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id5_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id5_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id5_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id5_bw_weight;
+ /* ID of CoS Queue 6. */
+ uint8_t queue_id6;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id6_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id6_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id6_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id6_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id6_bw_weight;
+ /* ID of CoS Queue 7. */
+ uint8_t queue_id7;
+ /*
+ * Minimum BW allocated to CoS Queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id7_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * Maximum BW allocated to CoS queue.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this COS inside the device.
+ */
+ uint32_t queue_id7_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID
+ /* Transmission Selection Algorithm (TSA) for CoS Queue. */
+ uint8_t queue_id7_tsa_assign;
+ /* Strict Priority */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_SP \
+ UINT32_C(0x0)
+ /* Enhanced Transmission Selection */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_ETS \
+ UINT32_C(0x1)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_FIRST \
+ UINT32_C(0x2)
+ /* reserved. */
+ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_LAST \
+ UINT32_C(0xff)
+ /*
+ * Priority level for strict priority. Valid only when the
+ * tsa_assign is 0 - Strict Priority (SP)
+ * 0..7 - Valid values.
+ * 8..255 - Reserved.
+ */
+ uint8_t queue_id7_pri_lvl;
+ /*
+ * Weight used to allocate remaining BW for this COS after
+ * servicing guaranteed bandwidths for all COS.
+ */
+ uint8_t queue_id7_bw_weight;
+ uint8_t unused_1[5];
+} __rte_packed;
+
+/* hwrm_queue_cos2bw_cfg_output (size:128b/16B) */
+struct hwrm_queue_cos2bw_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*************************
+ * hwrm_queue_dscp_qcaps *
+ *************************/
+
+
+/* hwrm_queue_dscp_qcaps_input (size:192b/24B) */
+struct hwrm_queue_dscp_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure pri2cos mapping on this port.
+ */
+ uint8_t port_id;
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/* hwrm_queue_dscp_qcaps_output (size:128b/16B) */
+struct hwrm_queue_dscp_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* The number of bits provided by the hardware for the DSCP value. */
+ uint8_t num_dscp_bits;
+ uint8_t unused_0;
+ /* Max number of DSCP-MASK-PRI entries supported. */
+ uint16_t max_entries;
+ uint8_t unused_1[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/****************************
+ * hwrm_queue_dscp2pri_qcfg *
+ ****************************/
+
+
+/* hwrm_queue_dscp2pri_qcfg_input (size:256b/32B) */
+struct hwrm_queue_dscp2pri_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the 24-bits DSCP-MASK-PRI
+ * tuple(s) will be copied to.
+ */
+ uint64_t dest_data_addr;
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure pri2cos mapping on this port.
+ */
+ uint8_t port_id;
+ uint8_t unused_0;
+ /* Size of the buffer pointed to by dest_data_addr. */
+ uint16_t dest_data_buffer_size;
+ uint8_t unused_1[4];
+} __rte_packed;
+
+/* hwrm_queue_dscp2pri_qcfg_output (size:128b/16B) */
+struct hwrm_queue_dscp2pri_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * A count of the number of DSCP-MASK-PRI tuple(s) pointed to
+ * by the dest_data_addr.
+ */
+ uint16_t entry_cnt;
+ /*
+ * This is the default PRI which un-initialized DSCP values are
+ * mapped to.
+ */
+ uint8_t default_pri;
+ uint8_t unused_0[4];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***************************
+ * hwrm_queue_dscp2pri_cfg *
+ ***************************/
+
+
+/* hwrm_queue_dscp2pri_cfg_input (size:320b/40B) */
+struct hwrm_queue_dscp2pri_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the 24-bits DSCP-MASK-PRI tuple
+ * will be copied from.
+ */
+ uint64_t src_data_addr;
+ uint32_t flags;
+ /* use_hw_default_pri is 1 b */
+ #define HWRM_QUEUE_DSCP2PRI_CFG_INPUT_FLAGS_USE_HW_DEFAULT_PRI \
+ UINT32_C(0x1)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the default_pri field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_DSCP2PRI_CFG_INPUT_ENABLES_DEFAULT_PRI \
+ UINT32_C(0x1)
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure pri2cos mapping on this port.
+ */
+ uint8_t port_id;
+ /*
+ * This is the default PRI which un-initialized DSCP values will be
+ * mapped to.
+ */
+ uint8_t default_pri;
+ /*
+ * A count of the number of DSCP-MASK-PRI tuple(s) in the data pointed
+ * to by src_data_addr.
+ */
+ uint16_t entry_cnt;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_queue_dscp2pri_cfg_output (size:128b/16B) */
+struct hwrm_queue_dscp2pri_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*************************
+ * hwrm_queue_mpls_qcaps *
+ *************************/
+
+
+/* hwrm_queue_mpls_qcaps_input (size:192b/24B) */
+struct hwrm_queue_mpls_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure MPLS TC(EXP) to pri mapping on this port.
+ */
+ uint8_t port_id;
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/* hwrm_queue_mpls_qcaps_output (size:128b/16B) */
+struct hwrm_queue_mpls_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * Bitmask indicating which queues can be configured by the
+ * hwrm_queue_mplstc2pri_cfg command.
+ *
+ * Each bit represents a specific pri where bit 0 represents
+ * pri 0 and bit 7 represents pri 7.
+ * # A value of 0 indicates that the pri is not configurable
+ * by the hwrm_queue_mplstc2pri_cfg command.
+ * # A value of 1 indicates that the pri is configurable.
+ * # A hwrm_queue_mplstc2pri_cfg command shall return error when
+ * trying to configure a pri that is not configurable.
+ */
+ uint8_t queue_mplstc2pri_cfg_allowed;
+ /*
+ * This is the default PRI which un-initialized MPLS values will be
+ * mapped to.
+ */
+ uint8_t hw_default_pri;
+ uint8_t unused_0[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************************
+ * hwrm_queue_mplstc2pri_qcfg *
+ ******************************/
+
+
+/* hwrm_queue_mplstc2pri_qcfg_input (size:192b/24B) */
+struct hwrm_queue_mplstc2pri_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure MPLS TC(EXP) to pri mapping on this port.
+ */
+ uint8_t port_id;
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/* hwrm_queue_mplstc2pri_qcfg_output (size:192b/24B) */
+struct hwrm_queue_mplstc2pri_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * pri assigned to MPLS TC(EXP) 0. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 0.
+ */
+ uint8_t tc0_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 1. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 1.
+ */
+ uint8_t tc1_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 2. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 2.
+ */
+ uint8_t tc2_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 3. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 3.
+ */
+ uint8_t tc3_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 4. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 4.
+ */
+ uint8_t tc4_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 5. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 5.
+ */
+ uint8_t tc5_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 6. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 6.
+ */
+ uint8_t tc6_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 7. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 7.
+ */
+ uint8_t tc7_pri_queue_id;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*****************************
+ * hwrm_queue_mplstc2pri_cfg *
+ *****************************/
+
+
+/* hwrm_queue_mplstc2pri_cfg_input (size:256b/32B) */
+struct hwrm_queue_mplstc2pri_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the mplstc0_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC0_PRI_QUEUE_ID \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the mplstc1_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC1_PRI_QUEUE_ID \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the mplstc2_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC2_PRI_QUEUE_ID \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the mplstc3_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC3_PRI_QUEUE_ID \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the mplstc4_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC4_PRI_QUEUE_ID \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the mplstc5_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC5_PRI_QUEUE_ID \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the mplstc6_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC6_PRI_QUEUE_ID \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the mplstc7_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC7_PRI_QUEUE_ID \
+ UINT32_C(0x80)
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure MPLS TC(EXP)to pri mapping on this port.
+ */
+ uint8_t port_id;
+ uint8_t unused_0[3];
+ /*
+ * pri assigned to MPLS TC(EXP) 0. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc0_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 1. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc1_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 2 This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc2_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 3. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc3_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 4. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc4_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 5. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc5_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 6. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc6_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 7. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc7_pri_queue_id;
+} __rte_packed;
+
+/* hwrm_queue_mplstc2pri_cfg_output (size:128b/16B) */
+struct hwrm_queue_mplstc2pri_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************
+ * hwrm_vnic_alloc *
+ *******************/
+
+
+/* hwrm_vnic_alloc_input (size:192b/24B) */
+struct hwrm_vnic_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * When this bit is '1', this VNIC is requested to
+ * be the default VNIC for this function.
+ */
+ #define HWRM_VNIC_ALLOC_INPUT_FLAGS_DEFAULT UINT32_C(0x1)
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_vnic_alloc_output (size:128b/16B) */
+struct hwrm_vnic_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Logical vnic ID */
+ uint32_t vnic_id;
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************
+ * hwrm_vnic_free *
+ ******************/
+
+
+/* hwrm_vnic_free_input (size:192b/24B) */
+struct hwrm_vnic_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Logical vnic ID */
+ uint32_t vnic_id;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_vnic_free_output (size:128b/16B) */
+struct hwrm_vnic_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*****************
+ * hwrm_vnic_cfg *
+ *****************/
+
+
+/* hwrm_vnic_cfg_input (size:384b/48B) */
+struct hwrm_vnic_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC is requested to
+ * be the default VNIC for the function.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC is being configured to
+ * strip VLAN in the RX path.
+ * If set to '0', then VLAN stripping is disabled on
+ * this VNIC.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC is being configured to
+ * buffer receive packets in the hardware until the host
+ * posts new receive buffers.
+ * If set to '0', then bd_stall is being configured to be
+ * disabled on this VNIC.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_BD_STALL_MODE \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC is being configured to
+ * receive both RoCE and non-RoCE traffic.
+ * If set to '0', then this VNIC is not configured to be
+ * operating in dual VNIC mode.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_DUAL_VNIC_MODE \
+ UINT32_C(0x8)
+ /*
+ * When this flag is set to '1', the VNIC is requested to
+ * be configured to receive only RoCE traffic.
+ * If this flag is set to '0', then this flag shall be
+ * ignored by the HWRM.
+ * If roce_dual_vnic_mode flag is set to '1'
+ * or roce_mirroring_capable_vnic_mode flag to 1,
+ * then the HWRM client shall not set this flag to '1'.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_ONLY_VNIC_MODE \
+ UINT32_C(0x10)
+ /*
+ * When a VNIC uses one destination ring group for certain
+ * application (e.g. Receive Flow Steering) where
+ * exact match is used to direct packets to a VNIC with one
+ * destination ring group only, there is no need to configure
+ * RSS indirection table for that VNIC as only one destination
+ * ring group is used.
+ *
+ * This flag is used to enable a mode where
+ * RSS is enabled in the VNIC using a RSS context
+ * for computing RSS hash but the RSS indirection table is
+ * not configured using hwrm_vnic_rss_cfg.
+ *
+ * If this mode is enabled, then the driver should not program
+ * RSS indirection table for the RSS context that is used for
+ * computing RSS hash only.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_RSS_DFLT_CR_MODE \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1', the VNIC is being configured to
+ * receive both RoCE and non-RoCE traffic, but forward only the
+ * RoCE traffic further. Also, RoCE traffic can be mirrored to
+ * L2 driver.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \
+ UINT32_C(0x40)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the dflt_ring_grp field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the rss_rule field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the cos_rule field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_COS_RULE \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the lb_rule field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_LB_RULE \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the mru field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_MRU \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the default_rx_ring_id field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_DEFAULT_RX_RING_ID \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the default_cmpl_ring_id field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_DEFAULT_CMPL_RING_ID \
+ UINT32_C(0x40)
+ /* This bit must be '1' for the queue_id field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_QUEUE_ID \
+ UINT32_C(0x80)
+ /* Logical vnic ID */
+ uint16_t vnic_id;
+ /*
+ * Default Completion ring for the VNIC. This ring will
+ * be chosen if packet does not match any RSS rules and if
+ * there is no COS rule.
+ */
+ uint16_t dflt_ring_grp;
+ /*
+ * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if
+ * there is no RSS rule.
+ */
+ uint16_t rss_rule;
+ /*
+ * RSS ID for COS rule/table structure. 0xFF... (All Fs) if
+ * there is no COS rule.
+ */
+ uint16_t cos_rule;
+ /*
+ * RSS ID for load balancing rule/table structure.
+ * 0xFF... (All Fs) if there is no LB rule.
+ */
+ uint16_t lb_rule;
+ /*
+ * The maximum receive unit of the vnic.
+ * Each vnic is associated with a function.
+ * The vnic mru value overwrites the mru setting of the
+ * associated function.
+ * The HWRM shall make sure that vnic mru does not exceed
+ * the mru of the port the function is associated with.
+ */
+ uint16_t mru;
+ /*
+ * Default Rx ring for the VNIC. This ring will
+ * be chosen if packet does not match any RSS rules.
+ * The aggregation ring associated with the Rx ring is
+ * implied based on the Rx ring specified when the
+ * aggregation ring was allocated.
+ */
+ uint16_t default_rx_ring_id;
+ /*
+ * Default completion ring for the VNIC. This ring will
+ * be chosen if packet does not match any RSS rules.
+ */
+ uint16_t default_cmpl_ring_id;
+ /*
+ * When specified, only incoming packets classified to the specified CoS
+ * queue ID will be arriving on this VNIC. Packet priority to CoS mapping
+ * rules can be specified using HWRM_QUEUE_PRI2COS_CFG. In this mode,
+ * ntuple filters with VNIC destination specified are invalid since they
+ * conflict with the the CoS to VNIC steering rules in this mode.
+ *
+ * If this field is not specified, packet to VNIC steering will be
+ * subject to the standard L2 filter rules and any additional ntuple
+ * filter rules with destination VNIC specified.
+ */
+ uint16_t queue_id;
+ uint8_t unused0[6];
+} __rte_packed;
+
+/* hwrm_vnic_cfg_output (size:128b/16B) */
+struct hwrm_vnic_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************
+ * hwrm_vnic_qcfg *
+ ******************/
+
+
+/* hwrm_vnic_qcfg_input (size:256b/32B) */
+struct hwrm_vnic_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the vf_id_valid field to be
+ * configured.
+ */
+ #define HWRM_VNIC_QCFG_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1)
+ /* Logical vnic ID */
+ uint32_t vnic_id;
+ /* ID of Virtual Function whose VNIC resource is being queried. */
+ uint16_t vf_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_vnic_qcfg_output (size:256b/32B) */
+struct hwrm_vnic_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Default Completion ring for the VNIC. */
+ uint16_t dflt_ring_grp;
+ /*
+ * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if
+ * there is no RSS rule.
+ */
+ uint16_t rss_rule;
+ /*
+ * RSS ID for COS rule/table structure. 0xFF... (All Fs) if
+ * there is no COS rule.
+ */
+ uint16_t cos_rule;
+ /*
+ * RSS ID for load balancing rule/table structure.
+ * 0xFF... (All Fs) if there is no LB rule.
+ */
+ uint16_t lb_rule;
+ /* The maximum receive unit of the vnic. */
+ uint16_t mru;
+ uint8_t unused_0[2];
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC is the default VNIC for
+ * the function.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_DEFAULT \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC is configured to
+ * strip VLAN in the RX path.
+ * If set to '0', then VLAN stripping is disabled on
+ * this VNIC.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_VLAN_STRIP_MODE \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC is configured to
+ * buffer receive packets in the hardware until the host
+ * posts new receive buffers.
+ * If set to '0', then bd_stall is disabled on
+ * this VNIC.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_BD_STALL_MODE \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC is configured to
+ * receive both RoCE and non-RoCE traffic.
+ * If set to '0', then this VNIC is not configured to
+ * operate in dual VNIC mode.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_DUAL_VNIC_MODE \
+ UINT32_C(0x8)
+ /*
+ * When this flag is set to '1', the VNIC is configured to
+ * receive only RoCE traffic.
+ * When this flag is set to '0', the VNIC is not configured
+ * to receive only RoCE traffic.
+ * If roce_dual_vnic_mode flag and this flag both are set
+ * to '1', then it is an invalid configuration of the
+ * VNIC. The HWRM should not allow that type of
+ * mis-configuration by HWRM clients.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_ONLY_VNIC_MODE \
+ UINT32_C(0x10)
+ /*
+ * When a VNIC uses one destination ring group for certain
+ * application (e.g. Receive Flow Steering) where
+ * exact match is used to direct packets to a VNIC with one
+ * destination ring group only, there is no need to configure
+ * RSS indirection table for that VNIC as only one destination
+ * ring group is used.
+ *
+ * When this bit is set to '1', then the VNIC is enabled in a
+ * mode where RSS is enabled in the VNIC using a RSS context
+ * for computing RSS hash but the RSS indirection table is
+ * not configured.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_RSS_DFLT_CR_MODE \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1', the VNIC is configured to
+ * receive both RoCE and non-RoCE traffic, but forward only
+ * RoCE traffic further. Also RoCE traffic can be mirrored to
+ * L2 driver.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \
+ UINT32_C(0x40)
+ /*
+ * When returned with a valid CoS Queue id, the CoS Queue/VNIC association
+ * is valid. Otherwise it will return 0xFFFF to indicate no VNIC/CoS
+ * queue association.
+ */
+ uint16_t queue_id;
+ uint8_t unused_1[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************
+ * hwrm_vnic_qcaps *
+ *******************/
+
+
+/* hwrm_vnic_qcaps_input (size:192b/24B) */
+struct hwrm_vnic_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_vnic_qcaps_output (size:192b/24B) */
+struct hwrm_vnic_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* The maximum receive unit that is settable on a vnic. */
+ uint16_t mru;
+ uint8_t unused_0[2];
+ uint32_t flags;
+ /* Unused. */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_UNUSED \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', the capability of stripping VLAN in
+ * the RX path is supported on VNIC(s).
+ * If set to '0', then VLAN stripping capability is
+ * not supported on VNIC(s).
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_VLAN_STRIP_CAP \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', the capability to buffer receive
+ * packets in the hardware until the host posts new receive buffers
+ * is supported on VNIC(s).
+ * If set to '0', then bd_stall capability is not supported
+ * on VNIC(s).
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_BD_STALL_CAP \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', the capability to
+ * receive both RoCE and non-RoCE traffic on VNIC(s) is
+ * supported.
+ * If set to '0', then the capability to receive
+ * both RoCE and non-RoCE traffic on VNIC(s) is
+ * not supported.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_DUAL_VNIC_CAP \
+ UINT32_C(0x8)
+ /*
+ * When this bit is set to '1', the capability to configure
+ * a VNIC to receive only RoCE traffic is supported.
+ * When this flag is set to '0', the VNIC capability to
+ * configure to receive only RoCE traffic is not supported.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_ONLY_VNIC_CAP \
+ UINT32_C(0x10)
+ /*
+ * When this bit is set to '1', then the capability to enable
+ * a VNIC in a mode where RSS context without configuring
+ * RSS indirection table is supported (for RSS hash computation).
+ * When this bit is set to '0', then a VNIC can not be configured
+ * with a mode to enable RSS context without configuring RSS
+ * indirection table.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_RSS_DFLT_CR_CAP \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1', the capability to
+ * mirror the the RoCE traffic is supported.
+ * If set to '0', then the capability to mirror the
+ * RoCE traffic is not supported.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_CAP \
+ UINT32_C(0x40)
+ /*
+ * When this bit is '1', the outermost RSS hashing capability
+ * is supported. If set to '0', then the outermost RSS hashing
+ * capability is not supported.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_OUTERMOST_RSS_CAP \
+ UINT32_C(0x80)
+ /*
+ * When this bit is '1', it indicates that firmware supports the
+ * ability to steer incoming packets from one CoS queue to one
+ * VNIC. This optional feature can then be enabled
+ * using HWRM_VNIC_CFG on any VNIC. This feature is only
+ * available when NVM option “enable_cos_classfication” is set
+ * to 1. If set to '0', firmware does not support this feature.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_COS_ASSIGNMENT_CAP \
+ UINT32_C(0x100)
+ /*
+ * This field advertises the maximum concurrent TPA aggregations
+ * supported by the VNIC on new devices that support TPA v2.
+ * '0' means that TPA v2 is not supported.
+ */
+ uint16_t max_aggs_supported;
+ uint8_t unused_1[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*********************
+ * hwrm_vnic_tpa_cfg *
+ *********************/
+
+
+/* hwrm_vnic_tpa_cfg_input (size:320b/40B) */
+struct hwrm_vnic_tpa_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) of
+ * non-tunneled TCP packets.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_TPA \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) of
+ * tunneled TCP packets.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_ENCAP_TPA \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) according
+ * to Windows Receive Segment Coalescing (RSC) rules.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_RSC_WND_UPDATE \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) according
+ * to Linux Generic Receive Offload (GRO) rules.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) for TCP
+ * packets with IP ECN set to non-zero.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_ECN \
+ UINT32_C(0x10)
+ /*
+ * When this bit is '1', the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) for
+ * GRE tunneled TCP packets only if all packets have the
+ * same GRE sequence.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_SAME_GRE_SEQ \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1' and the GRO mode is enabled,
+ * the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) for
+ * TCP/IPv4 packets with consecutively increasing IPIDs.
+ * In other words, the last packet that is being
+ * aggregated to an already existing aggregation context
+ * shall have IPID 1 more than the IPID of the last packet
+ * that was aggregated in that aggregation context.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_IPID_CHECK \
+ UINT32_C(0x40)
+ /*
+ * When this bit is '1' and the GRO mode is enabled,
+ * the VNIC shall be configured to
+ * perform transparent packet aggregation (TPA) for
+ * TCP packets with the same TTL (IPv4) or Hop limit (IPv6)
+ * value.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_TTL_CHECK \
+ UINT32_C(0x80)
+ /*
+ * When this bit is '1' and the GRO mode is enabled,
+ * the VNIC shall DMA payload data using GRO rules.
+ * When this bit is '0', the VNIC shall DMA payload data
+ * using the more efficient LRO rules of filling all
+ * aggregation buffers.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_PACK_AS_GRO \
+ UINT32_C(0x100)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the max_agg_segs field to be
+ * configured.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_SEGS UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the max_aggs field to be
+ * configured.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGGS UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the max_agg_timer field to be
+ * configured.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_TIMER UINT32_C(0x4)
+ /* deprecated bit. Do not use!!! */
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MIN_AGG_LEN UINT32_C(0x8)
+ /* Logical vnic ID */
+ uint16_t vnic_id;
+ /*
+ * This is the maximum number of TCP segments that can
+ * be aggregated (unit is Log2). Max value is 31. On new
+ * devices supporting TPA v2, the unit is multiples of 4 and
+ * valid values are > 0 and <= 63.
+ */
+ uint16_t max_agg_segs;
+ /* 1 segment */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_1 UINT32_C(0x0)
+ /* 2 segments */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_2 UINT32_C(0x1)
+ /* 4 segments */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_4 UINT32_C(0x2)
+ /* 8 segments */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_8 UINT32_C(0x3)
+ /* Any segment size larger than this is not valid */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX UINT32_C(0x1f)
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_LAST \
+ HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX
+ /*
+ * This is the maximum number of aggregations this VNIC is
+ * allowed (unit is Log2). Max value is 7. On new devices
+ * supporting TPA v2, this is in unit of 1 and must be > 0
+ * and <= max_aggs_supported in the hwrm_vnic_qcaps response
+ * to enable TPA v2.
+ */
+ uint16_t max_aggs;
+ /* 1 aggregation */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_1 UINT32_C(0x0)
+ /* 2 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_2 UINT32_C(0x1)
+ /* 4 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_4 UINT32_C(0x2)
+ /* 8 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_8 UINT32_C(0x3)
+ /* 16 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_16 UINT32_C(0x4)
+ /* Any aggregation size larger than this is not valid */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX UINT32_C(0x7)
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_LAST \
+ HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX
+ uint8_t unused_0[2];
+ /*
+ * This is the maximum amount of time allowed for
+ * an aggregation context to complete after it was initiated.
+ */
+ uint32_t max_agg_timer;
+ /*
+ * This is the minimum amount of payload length required to
+ * start an aggregation context. This field is deprecated and
+ * should be set to 0. The minimum length is set by firmware
+ * and can be queried using hwrm_vnic_tpa_qcfg.
+ */
+ uint32_t min_agg_len;
+} __rte_packed;
+
+/* hwrm_vnic_tpa_cfg_output (size:128b/16B) */
+struct hwrm_vnic_tpa_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*********************
+ * hwrm_vnic_rss_cfg *
+ *********************/
+
+
+/* hwrm_vnic_rss_cfg_input (size:384b/48B) */
+struct hwrm_vnic_rss_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t hash_type;
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source and destination IPv4 addresses of IPv4
+ * packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4 UINT32_C(0x1)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv4 addresses and
+ * source/destination ports of TCP/IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv4 addresses and
+ * source/destination ports of UDP/IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source and destination IPv4 addresses of IPv6
+ * packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6 UINT32_C(0x8)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv6 addresses and
+ * source/destination ports of TCP/IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv6 addresses and
+ * source/destination ports of UDP/IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20)
+ /* VNIC ID of VNIC associated with RSS table being configured. */
+ uint16_t vnic_id;
+ /*
+ * Specifies which VNIC ring table pair to configure.
+ * Valid values range from 0 to 7.
+ */
+ uint8_t ring_table_pair_index;
+ /* Flags to specify different RSS hash modes. */
+ uint8_t hash_mode_flags;
+ /*
+ * When this bit is '1', it indicates using current RSS
+ * hash mode setting configured in the device.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_DEFAULT \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over innermost 4 tuples {l3.src, l3.dest,
+ * l4.src, l4.dest} for tunnel packets. For none-tunnel
+ * packets, the RSS hash is computed over the normal
+ * src/dest l3 and src/dest l4 headers.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_INNERMOST_4 \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over innermost 2 tuples {l3.src, l3.dest} for
+ * tunnel packets. For none-tunnel packets, the RSS hash is
+ * computed over the normal src/dest l3 headers.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_INNERMOST_2 \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over outermost 4 tuples {t_l3.src, t_l3.dest,
+ * t_l4.src, t_l4.dest} for tunnel packets. For none-tunnel
+ * packets, the RSS hash is computed over the normal
+ * src/dest l3 and src/dest l4 headers.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_OUTERMOST_4 \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over outermost 2 tuples {t_l3.src, t_l3.dest} for
+ * tunnel packets. For none-tunnel packets, the RSS hash is
+ * computed over the normal src/dest l3 headers.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_OUTERMOST_2 \
+ UINT32_C(0x10)
+ /* This is the address for rss ring group table */
+ uint64_t ring_grp_tbl_addr;
+ /* This is the address for rss hash key table */
+ uint64_t hash_key_tbl_addr;
+ /* Index to the rss indirection table. */
+ uint16_t rss_ctx_idx;
+ uint8_t unused_1[6];
+} __rte_packed;
+
+/* hwrm_vnic_rss_cfg_output (size:128b/16B) */
+struct hwrm_vnic_rss_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/* hwrm_vnic_rss_cfg_cmd_err (size:64b/8B) */
+struct hwrm_vnic_rss_cfg_cmd_err {
+ /*
+ * command specific error codes that goes to
+ * the cmd_err field in Common HWRM Error Response.
+ */
+ uint8_t code;
+ /* Unknown error */
+ #define HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_UNKNOWN \
+ UINT32_C(0x0)
+ /*
+ * Unable to change global RSS mode to outer due to all active
+ * interfaces are not ready to support outer RSS hashing.
+ */
+ #define HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_INTERFACE_NOT_READY \
+ UINT32_C(0x1)
+ #define HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_LAST \
+ HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_INTERFACE_NOT_READY
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/**********************
+ * hwrm_vnic_rss_qcfg *
+ **********************/
+
+
+/* hwrm_vnic_rss_qcfg_input (size:192b/24B) */
+struct hwrm_vnic_rss_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Index to the rss indirection table. */
+ uint16_t rss_ctx_idx;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_vnic_rss_qcfg_output (size:512b/64B) */
+struct hwrm_vnic_rss_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t hash_type;
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source and destination IPv4 addresses of IPv4
+ * packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_IPV4 UINT32_C(0x1)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv4 addresses and
+ * source/destination ports of TCP/IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv4 addresses and
+ * source/destination ports of UDP/IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source and destination IPv4 addresses of IPv6
+ * packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_IPV6 UINT32_C(0x8)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv6 addresses and
+ * source/destination ports of TCP/IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv6 addresses and
+ * source/destination ports of UDP/IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20)
+ uint8_t unused_0[4];
+ /* This is the value of rss hash key */
+ uint32_t hash_key[10];
+ /* Flags to specify different RSS hash modes. */
+ uint8_t hash_mode_flags;
+ /*
+ * When this bit is '1', it indicates using current RSS
+ * hash mode setting configured in the device.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_DEFAULT \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over innermost 4 tuples {l3.src, l3.dest,
+ * l4.src, l4.dest} for tunnel packets. For none-tunnel
+ * packets, the RSS hash is computed over the normal
+ * src/dest l3 and src/dest l4 headers.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_INNERMOST_4 \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over innermost 2 tuples {l3.src, l3.dest} for
+ * tunnel packets. For none-tunnel packets, the RSS hash is
+ * computed over the normal src/dest l3 headers.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_INNERMOST_2 \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over outermost 4 tuples {t_l3.src, t_l3.dest,
+ * t_l4.src, t_l4.dest} for tunnel packets. For none-tunnel
+ * packets, the RSS hash is computed over the normal
+ * src/dest l3 and src/dest l4 headers.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_OUTERMOST_4 \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over outermost 2 tuples {t_l3.src, t_l3.dest} for
+ * tunnel packets. For none-tunnel packets, the RSS hash is
+ * computed over the normal src/dest l3 headers.
+ */
+ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_OUTERMOST_2 \
+ UINT32_C(0x10)
+ uint8_t unused_1[6];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**************************
+ * hwrm_vnic_plcmodes_cfg *
+ **************************/
+
+
+/* hwrm_vnic_plcmodes_cfg_input (size:320b/40B) */
+struct hwrm_vnic_plcmodes_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC shall be configured to
+ * use regular placement algorithm.
+ * By default, the regular placement algorithm shall be
+ * enabled on the VNIC.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_REGULAR_PLACEMENT \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC shall be configured
+ * use the jumbo placement algorithm.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_JUMBO_PLACEMENT \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC shall be configured
+ * to enable Header-Data split for IPv4 packets according
+ * to the following rules:
+ * # If the packet is identified as TCP/IPv4, then the
+ * packet is split at the beginning of the TCP payload.
+ * # If the packet is identified as UDP/IPv4, then the
+ * packet is split at the beginning of UDP payload.
+ * # If the packet is identified as non-TCP and non-UDP
+ * IPv4 packet, then the packet is split at the beginning
+ * of the upper layer protocol header carried in the IPv4
+ * packet.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV4 \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC shall be configured
+ * to enable Header-Data split for IPv6 packets according
+ * to the following rules:
+ * # If the packet is identified as TCP/IPv6, then the
+ * packet is split at the beginning of the TCP payload.
+ * # If the packet is identified as UDP/IPv6, then the
+ * packet is split at the beginning of UDP payload.
+ * # If the packet is identified as non-TCP and non-UDP
+ * IPv6 packet, then the packet is split at the beginning
+ * of the upper layer protocol header carried in the IPv6
+ * packet.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV6 \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', the VNIC shall be configured
+ * to enable Header-Data split for FCoE packets at the
+ * beginning of FC payload.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_FCOE \
+ UINT32_C(0x10)
+ /*
+ * When this bit is '1', the VNIC shall be configured
+ * to enable Header-Data split for RoCE packets at the
+ * beginning of RoCE payload (after BTH/GRH headers).
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_ROCE \
+ UINT32_C(0x20)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the jumbo_thresh_valid field to be
+ * configured.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_JUMBO_THRESH_VALID \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the hds_offset_valid field to be
+ * configured.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_OFFSET_VALID \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the hds_threshold_valid field to be
+ * configured.
+ */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_THRESHOLD_VALID \
+ UINT32_C(0x4)
+ /* Logical vnic ID */
+ uint32_t vnic_id;
+ /*
+ * When jumbo placement algorithm is enabled, this value
+ * is used to determine the threshold for jumbo placement.
+ * Packets with length larger than this value will be
+ * placed according to the jumbo placement algorithm.
+ */
+ uint16_t jumbo_thresh;
+ /*
+ * This value is used to determine the offset into
+ * packet buffer where the split data (payload) will be
+ * placed according to one of HDS placement algorithm.
+ *
+ * The lengths of packet buffers provided for split data
+ * shall be larger than this value.
+ */
+ uint16_t hds_offset;
+ /*
+ * When one of the HDS placement algorithm is enabled, this
+ * value is used to determine the threshold for HDS
+ * placement.
+ * Packets with length larger than this value will be
+ * placed according to the HDS placement algorithm.
+ * This value shall be in multiple of 4 bytes.
+ */
+ uint16_t hds_threshold;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_vnic_plcmodes_cfg_output (size:128b/16B) */
+struct hwrm_vnic_plcmodes_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***************************
+ * hwrm_vnic_plcmodes_qcfg *
+ ***************************/
+
+
+/* hwrm_vnic_plcmodes_qcfg_input (size:192b/24B) */
+struct hwrm_vnic_plcmodes_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Logical vnic ID */
+ uint32_t vnic_id;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_vnic_plcmodes_qcfg_output (size:192b/24B) */
+struct hwrm_vnic_plcmodes_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC is configured to
+ * use regular placement algorithm.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_REGULAR_PLACEMENT \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC is configured to
+ * use the jumbo placement algorithm.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_JUMBO_PLACEMENT \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC is configured
+ * to enable Header-Data split for IPv4 packets.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV4 \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC is configured
+ * to enable Header-Data split for IPv6 packets.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV6 \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', the VNIC is configured
+ * to enable Header-Data split for FCoE packets.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_FCOE \
+ UINT32_C(0x10)
+ /*
+ * When this bit is '1', the VNIC is configured
+ * to enable Header-Data split for RoCE packets.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_ROCE \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1', the VNIC is configured
+ * to be the default VNIC of the requesting function.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_DFLT_VNIC \
+ UINT32_C(0x40)
+ /*
+ * When jumbo placement algorithm is enabled, this value
+ * is used to determine the threshold for jumbo placement.
+ * Packets with length larger than this value will be
+ * placed according to the jumbo placement algorithm.
+ */
+ uint16_t jumbo_thresh;
+ /*
+ * This value is used to determine the offset into
+ * packet buffer where the split data (payload) will be
+ * placed according to one of HDS placement algorithm.
+ *
+ * The lengths of packet buffers provided for split data
+ * shall be larger than this value.
+ */
+ uint16_t hds_offset;
+ /*
+ * When one of the HDS placement algorithm is enabled, this
+ * value is used to determine the threshold for HDS
+ * placement.
+ * Packets with length larger than this value will be
+ * placed according to the HDS placement algorithm.
+ * This value shall be in multiple of 4 bytes.
+ */
+ uint16_t hds_threshold;
+ uint8_t unused_0[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************************
+ * hwrm_vnic_rss_cos_lb_ctx_alloc *
+ **********************************/
+
+
+/* hwrm_vnic_rss_cos_lb_ctx_alloc_input (size:128b/16B) */
+struct hwrm_vnic_rss_cos_lb_ctx_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+} __rte_packed;
+
+/* hwrm_vnic_rss_cos_lb_ctx_alloc_output (size:128b/16B) */
+struct hwrm_vnic_rss_cos_lb_ctx_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* rss_cos_lb_ctx_id is 16 b */
+ uint16_t rss_cos_lb_ctx_id;
+ uint8_t unused_0[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*********************************
+ * hwrm_vnic_rss_cos_lb_ctx_free *
+ *********************************/
+
+
+/* hwrm_vnic_rss_cos_lb_ctx_free_input (size:192b/24B) */
+struct hwrm_vnic_rss_cos_lb_ctx_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* rss_cos_lb_ctx_id is 16 b */
+ uint16_t rss_cos_lb_ctx_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_vnic_rss_cos_lb_ctx_free_output (size:128b/16B) */
+struct hwrm_vnic_rss_cos_lb_ctx_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************
+ * hwrm_ring_alloc *
+ *******************/
+
+
+/* hwrm_ring_alloc_input (size:704b/88B) */
+struct hwrm_ring_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the ring_arb_cfg field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RING_ARB_CFG \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the stat_ctx_id_valid field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_STAT_CTX_ID_VALID \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the max_bw_valid field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_MAX_BW_VALID \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the rx_ring_id field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RX_RING_ID_VALID \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the nq_ring_id field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_NQ_RING_ID_VALID \
+ UINT32_C(0x80)
+ /*
+ * This bit must be '1' for the rx_buf_size field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RX_BUF_SIZE_VALID \
+ UINT32_C(0x100)
+ /* Ring Type. */
+ uint8_t ring_type;
+ /* L2 Completion Ring (CR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0)
+ /* TX Ring (TR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_TX UINT32_C(0x1)
+ /* RX Ring (RR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX UINT32_C(0x2)
+ /* RoCE Notification Completion Ring (ROCE_CR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
+ /* RX Aggregation Ring */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX_AGG UINT32_C(0x4)
+ /* Notification Queue */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_NQ UINT32_C(0x5)
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_LAST \
+ HWRM_RING_ALLOC_INPUT_RING_TYPE_NQ
+ uint8_t unused_0;
+ /* Ring allocation flags. */
+ uint16_t flags;
+ /*
+ * For Rx rings, the incoming packet data can be placed at either
+ * a 0B or 2B offset from the start of the Rx packet buffer. When
+ * '1', the received packet will be padded with 2B of zeros at the
+ * front of the packet. Note that this flag is only used for
+ * Rx rings and is ignored for all other rings included Rx
+ * Aggregation rings.
+ */
+ #define HWRM_RING_ALLOC_INPUT_FLAGS_RX_SOP_PAD UINT32_C(0x1)
+ /*
+ * This value is a pointer to the page table for the
+ * Ring.
+ */
+ uint64_t page_tbl_addr;
+ /* First Byte Offset of the first entry in the first page. */
+ uint32_t fbo;
+ /*
+ * Actual page size in 2^page_size. The supported range is increments
+ * in powers of 2 from 16 bytes to 1GB.
+ * - 4 = 16 B
+ * Page size is 16 B.
+ * - 12 = 4 KB
+ * Page size is 4 KB.
+ * - 13 = 8 KB
+ * Page size is 8 KB.
+ * - 16 = 64 KB
+ * Page size is 64 KB.
+ * - 21 = 2 MB
+ * Page size is 2 MB.
+ * - 22 = 4 MB
+ * Page size is 4 MB.
+ * - 30 = 1 GB
+ * Page size is 1 GB.
+ */
+ uint8_t page_size;
+ /*
+ * This value indicates the depth of page table.
+ * For this version of the specification, value other than 0 or
+ * 1 shall be considered as an invalid value.
+ * When the page_tbl_depth = 0, then it is treated as a
+ * special case with the following.
+ * 1. FBO and page size fields are not valid.
+ * 2. page_tbl_addr is the physical address of the first
+ * element of the ring.
+ */
+ uint8_t page_tbl_depth;
+ uint8_t unused_1[2];
+ /*
+ * Number of 16B units in the ring. Minimum size for
+ * a ring is 16 16B entries.
+ */
+ uint32_t length;
+ /*
+ * Logical ring number for the ring to be allocated.
+ * This value determines the position in the doorbell
+ * area where the update to the ring will be made.
+ *
+ * For completion rings, this value is also the MSI-X
+ * vector number for the function the completion ring is
+ * associated with.
+ */
+ uint16_t logical_id;
+ /*
+ * This field is used only when ring_type is a TX ring.
+ * This value indicates what completion ring the TX ring
+ * is associated with.
+ */
+ uint16_t cmpl_ring_id;
+ /*
+ * This field is used only when ring_type is a TX ring.
+ * This value indicates what CoS queue the TX ring
+ * is associated with.
+ */
+ uint16_t queue_id;
+ /*
+ * When allocating a Rx ring or Rx aggregation ring, this field
+ * specifies the size of the buffer descriptors posted to the ring.
+ */
+ uint16_t rx_buf_size;
+ /*
+ * When allocating an Rx aggregation ring, this field
+ * specifies the associated Rx ring ID.
+ */
+ uint16_t rx_ring_id;
+ /*
+ * When allocating a completion ring, this field
+ * specifies the associated NQ ring ID.
+ */
+ uint16_t nq_ring_id;
+ /*
+ * This field is used only when ring_type is a TX ring.
+ * This field is used to configure arbitration related
+ * parameters for a TX ring.
+ */
+ uint16_t ring_arb_cfg;
+ /* Arbitration policy used for the ring. */
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_MASK \
+ UINT32_C(0xf)
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SFT 0
+ /*
+ * Use strict priority for the TX ring.
+ * Priority value is specified in arb_policy_param
+ */
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SP \
+ UINT32_C(0x1)
+ /*
+ * Use weighted fair queue arbitration for the TX ring.
+ * Weight is specified in arb_policy_param
+ */
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ \
+ UINT32_C(0x2)
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_LAST \
+ HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ
+ /* Reserved field. */
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_SFT 4
+ /*
+ * Arbitration policy specific parameter.
+ * # For strict priority arbitration policy, this field
+ * represents a priority value. If set to 0, then the priority
+ * is not specified and the HWRM is allowed to select
+ * any priority for this TX ring.
+ * # For weighted fair queue arbitration policy, this field
+ * represents a weight value. If set to 0, then the weight
+ * is not specified and the HWRM is allowed to select
+ * any weight for this TX ring.
+ */
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_MASK \
+ UINT32_C(0xff00)
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_SFT 8
+ uint16_t unused_3;
+ /*
+ * This field is reserved for the future use.
+ * It shall be set to 0.
+ */
+ uint32_t reserved3;
+ /*
+ * This field is used only when ring_type is a TX ring.
+ * This input indicates what statistics context this ring
+ * should be associated with.
+ */
+ uint32_t stat_ctx_id;
+ /*
+ * This field is reserved for the future use.
+ * It shall be set to 0.
+ */
+ uint32_t reserved4;
+ /*
+ * This field is used only when ring_type is a TX ring
+ * to specify maximum BW allocated to the TX ring.
+ * The HWRM will translate this value into byte counter and
+ * time interval used for this ring inside the device.
+ */
+ uint32_t max_bw;
+ /* The bandwidth value. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_SFT 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_LAST \
+ HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_SFT 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID
+ /*
+ * This field is used only when ring_type is a Completion ring.
+ * This value indicates what interrupt mode should be used
+ * on this completion ring.
+ * Note: In the legacy interrupt mode, no more than 16
+ * completion rings are allowed.
+ */
+ uint8_t int_mode;
+ /* Legacy INTA */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_LEGACY UINT32_C(0x0)
+ /* Reserved */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_RSVD UINT32_C(0x1)
+ /* MSI-X */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_MSIX UINT32_C(0x2)
+ /* No Interrupt - Polled mode */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_POLL UINT32_C(0x3)
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_LAST \
+ HWRM_RING_ALLOC_INPUT_INT_MODE_POLL
+ uint8_t unused_4[3];
+ /*
+ * The cq_handle is specified when allocating a completion ring. For
+ * devices that support NQs, this cq_handle will be included in the
+ * NQE to specify which CQ should be read to retrieve the completion
+ * record.
+ */
+ uint64_t cq_handle;
+} __rte_packed;
+
+/* hwrm_ring_alloc_output (size:128b/16B) */
+struct hwrm_ring_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * Physical number of ring allocated.
+ * This value shall be unique for a ring type.
+ */
+ uint16_t ring_id;
+ /* Logical number of ring allocated. */
+ uint16_t logical_ring_id;
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************
+ * hwrm_ring_free *
+ ******************/
+
+
+/* hwrm_ring_free_input (size:192b/24B) */
+struct hwrm_ring_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Ring Type. */
+ uint8_t ring_type;
+ /* L2 Completion Ring (CR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0)
+ /* TX Ring (TR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_TX UINT32_C(0x1)
+ /* RX Ring (RR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_RX UINT32_C(0x2)
+ /* RoCE Notification Completion Ring (ROCE_CR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
+ /* RX Aggregation Ring */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_RX_AGG UINT32_C(0x4)
+ /* Notification Queue */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_NQ UINT32_C(0x5)
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_LAST \
+ HWRM_RING_FREE_INPUT_RING_TYPE_NQ
+ uint8_t unused_0;
+ /* Physical number of ring allocated. */
+ uint16_t ring_id;
+ uint8_t unused_1[4];
+} __rte_packed;
+
+/* hwrm_ring_free_output (size:128b/16B) */
+struct hwrm_ring_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************
+ * hwrm_ring_reset *
+ *******************/
+
+
+/* hwrm_ring_reset_input (size:192b/24B) */
+struct hwrm_ring_reset_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Ring Type. */
+ uint8_t ring_type;
+ /* L2 Completion Ring (CR) */
+ #define HWRM_RING_RESET_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0)
+ /* TX Ring (TR) */
+ #define HWRM_RING_RESET_INPUT_RING_TYPE_TX UINT32_C(0x1)
+ /* RX Ring (RR) */
+ #define HWRM_RING_RESET_INPUT_RING_TYPE_RX UINT32_C(0x2)
+ /* RoCE Notification Completion Ring (ROCE_CR) */
+ #define HWRM_RING_RESET_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
+ #define HWRM_RING_RESET_INPUT_RING_TYPE_LAST \
+ HWRM_RING_RESET_INPUT_RING_TYPE_ROCE_CMPL
+ uint8_t unused_0;
+ /* Physical number of the ring. */
+ uint16_t ring_id;
+ uint8_t unused_1[4];
+} __rte_packed;
+
+/* hwrm_ring_reset_output (size:128b/16B) */
+struct hwrm_ring_reset_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[4];
+ /* Position of consumer index after ring reset completes. */
+ uint8_t consumer_idx[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**************************
+ * hwrm_ring_aggint_qcaps *
+ **************************/
+
+
+/* hwrm_ring_aggint_qcaps_input (size:128b/16B) */
+struct hwrm_ring_aggint_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+} __rte_packed;
+
+/* hwrm_ring_aggint_qcaps_output (size:384b/48B) */
+struct hwrm_ring_aggint_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t cmpl_params;
+ /*
+ * When this bit is set to '1', int_lat_tmr_min can be configured
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_INT_LAT_TMR_MIN \
+ UINT32_C(0x1)
+ /*
+ * When this bit is set to '1', int_lat_tmr_max can be configured
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_INT_LAT_TMR_MAX \
+ UINT32_C(0x2)
+ /*
+ * When this bit is set to '1', timer_reset can be enabled
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_TIMER_RESET \
+ UINT32_C(0x4)
+ /*
+ * When this bit is set to '1', ring_idle can be enabled
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_RING_IDLE \
+ UINT32_C(0x8)
+ /*
+ * When this bit is set to '1', num_cmpl_dma_aggr can be configured
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_NUM_CMPL_DMA_AGGR \
+ UINT32_C(0x10)
+ /*
+ * When this bit is set to '1', num_cmpl_dma_aggr_during_int can be configured
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_NUM_CMPL_DMA_AGGR_DURING_INT \
+ UINT32_C(0x20)
+ /*
+ * When this bit is set to '1', cmpl_aggr_dma_tmr can be configured
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_CMPL_AGGR_DMA_TMR \
+ UINT32_C(0x40)
+ /*
+ * When this bit is set to '1', cmpl_aggr_dma_tmr_during_int can be configured
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_CMPL_AGGR_DMA_TMR_DURING_INT \
+ UINT32_C(0x80)
+ /*
+ * When this bit is set to '1', num_cmpl_aggr_int can be configured
+ * on completion rings.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_CMPL_PARAMS_NUM_CMPL_AGGR_INT \
+ UINT32_C(0x100)
+ uint32_t nq_params;
+ /*
+ * When this bit is set to '1', int_lat_tmr_min can be configured
+ * on notification queues.
+ */
+ #define HWRM_RING_AGGINT_QCAPS_OUTPUT_NQ_PARAMS_INT_LAT_TMR_MIN \