+
+int dpni_set_opr(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t tc,
+ uint8_t index,
+ uint8_t options,
+ struct opr_cfg *cfg);
+
+int dpni_get_opr(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t tc,
+ uint8_t index,
+ struct opr_cfg *cfg,
+ struct opr_qry *qry);
+
+/**
+ * When used for queue_idx in function dpni_set_rx_dist_default_queue will
+ * signal to dpni to drop all unclassified frames
+ */
+#define DPNI_FS_MISS_DROP ((uint16_t)-1)
+
+/**
+ * struct dpni_rx_dist_cfg - distribution configuration
+ * @dist_size: distribution size; supported values: 1,2,3,4,6,7,8,
+ * 12,14,16,24,28,32,48,56,64,96,112,128,192,224,256,384,448,
+ * 512,768,896,1024
+ * @key_cfg_iova: I/O virtual address of 256 bytes DMA-able memory filled with
+ * the extractions to be used for the distribution key by calling
+ * dpkg_prepare_key_cfg() relevant only when enable!=0 otherwise
+ * it can be '0'
+ * @enable: enable/disable the distribution.
+ * @tc: TC id for which distribution is set
+ * @fs_miss_flow_id: when packet misses all rules from flow steering table and
+ * hash is disabled it will be put into this queue id; use
+ * DPNI_FS_MISS_DROP to drop frames. The value of this field is
+ * used only when flow steering distribution is enabled and hash
+ * distribution is disabled
+ */
+struct dpni_rx_dist_cfg {
+ uint16_t dist_size;
+ uint64_t key_cfg_iova;
+ uint8_t enable;
+ uint8_t tc;
+ uint16_t fs_miss_flow_id;
+};
+
+int dpni_set_rx_fs_dist(struct fsl_mc_io *mc_io, uint32_t cmd_flags,
+ uint16_t token, const struct dpni_rx_dist_cfg *cfg);
+
+int dpni_set_rx_hash_dist(struct fsl_mc_io *mc_io, uint32_t cmd_flags,
+ uint16_t token, const struct dpni_rx_dist_cfg *cfg);
+
+int dpni_add_custom_tpid(struct fsl_mc_io *mc_io, uint32_t cmd_flags,
+ uint16_t token, uint16_t tpid);
+
+int dpni_remove_custom_tpid(struct fsl_mc_io *mc_io, uint32_t cmd_flags,
+ uint16_t token, uint16_t tpid);
+
+/**
+ * struct dpni_custom_tpid_cfg - custom TPID configuration. Contains custom TPID
+ * values used in current dpni object to detect 802.1q frames.
+ * @tpid1: first tag. Not used if zero.
+ * @tpid2: second tag. Not used if zero.
+ */
+struct dpni_custom_tpid_cfg {
+ uint16_t tpid1;
+ uint16_t tpid2;
+};
+
+int dpni_get_custom_tpid(struct fsl_mc_io *mc_io, uint32_t cmd_flags,
+ uint16_t token, struct dpni_custom_tpid_cfg *tpid);
+
+/**
+ * enum dpni_soft_sequence_dest - Enumeration of WRIOP software sequence
+ * destinations
+ * @DPNI_SS_INGRESS: Ingress parser
+ * @DPNI_SS_EGRESS: Egress parser
+ */
+enum dpni_soft_sequence_dest {
+ DPNI_SS_INGRESS = 0,
+ DPNI_SS_EGRESS = 1,
+};
+
+/**
+ * struct dpni_load_ss_cfg - Structure for Software Sequence load configuration
+ * @dest: Destination of the Software Sequence: ingress or egress parser
+ * @ss_size: Size of the Software Sequence
+ * @ss_offset: The offset where to load the Software Sequence (0x20-0x7FD)
+ * @ss_iova: I/O virtual address of the Software Sequence
+ */
+struct dpni_load_ss_cfg {
+ enum dpni_soft_sequence_dest dest;
+ uint16_t ss_size;
+ uint16_t ss_offset;
+ uint64_t ss_iova;
+};
+
+/**
+ * struct dpni_enable_ss_cfg - Structure for software sequence enable
+ * configuration
+ * @dest: Destination of the Software Sequence: ingress or egress parser
+ * @hxs: HXS to attach the software sequence to
+ * @set_start: If the Software Sequence or HDR it is attached to is set as
+ * parser start
+ * If hxs=DUMMY_LAST_HXS the ss_offset is set directly as parser
+ * start else the hdr index code is set as parser start
+ * @ss_offset: The offset of the Software Sequence to enable or set as parse
+ * start
+ * @param_size: Size of the software sequence parameters
+ * @param_offset: Offset in the parameter zone for the software sequence
+ * parameters
+ * @param_iova: I/O virtual address of the parameters
+ */
+struct dpni_enable_ss_cfg {
+ enum dpni_soft_sequence_dest dest;
+ uint16_t hxs;
+ uint8_t set_start;
+ uint16_t ss_offset;
+ uint8_t param_size;
+ uint8_t param_offset;
+ uint64_t param_iova;
+};
+
+/**
+ * dpni_load_sw_sequence() - Loads a software sequence in parser memory.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPNI object
+ * @cfg: Software sequence load configuration
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpni_load_sw_sequence(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpni_load_ss_cfg *cfg);
+
+/**
+ * dpni_eanble_sw_sequence() - Enables a software sequence in the parser
+ * profile
+ * corresponding to the ingress or egress of the DPNI.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPNI object
+ * @cfg: Software sequence enable configuration
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpni_enable_sw_sequence(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpni_enable_ss_cfg *cfg);
+
+/**
+ * struct dpni_sw_sequence_layout - Structure for software sequence enable
+ * configuration
+ * @num_ss: Number of software sequences returned
+ * @ss: Array of software sequence entries. The number of valid entries
+ * must match 'num_ss' value
+ */
+struct dpni_sw_sequence_layout {
+ uint8_t num_ss;
+ struct {
+ uint16_t ss_offset;
+ uint16_t ss_size;
+ uint8_t param_offset;
+ uint8_t param_size;
+ } ss[DPNI_SW_SEQUENCE_LAYOUT_SIZE];
+};
+
+/**
+ * dpni_get_sw_sequence_layout() - Get the soft sequence layout
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPNI object
+ * @src: Source of the layout (WRIOP Rx or Tx)
+ * @ss_layout_iova: I/O virtual address of 264 bytes DMA-able memory
+ *
+ * warning: After calling this function, call dpni_extract_sw_sequence_layout()
+ * to get the layout
+ *
+ * Return: '0' on Success; error code otherwise.
+ */
+int dpni_get_sw_sequence_layout(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ enum dpni_soft_sequence_dest src,
+ uint64_t ss_layout_iova);
+
+/**
+ * dpni_extract_sw_sequence_layout() - extract the software sequence layout
+ * @layout: software sequence layout
+ * @sw_sequence_layout_buf: Zeroed 264 bytes of memory before mapping it
+ * to DMA
+ *
+ * This function has to be called after dpni_get_sw_sequence_layout
+ *
+ */
+void dpni_extract_sw_sequence_layout(struct dpni_sw_sequence_layout *layout,
+ const uint8_t *sw_sequence_layout_buf);
+