+/* Clear FD Table Command (direct, 0x0B06) */
+struct ice_aqc_clear_fd_table {
+ u8 clear_type;
+#define CL_FD_VM_VF_TYPE_VSI_IDX 1
+#define CL_FD_VM_VF_TYPE_PF_IDX 2
+ u8 rsvd;
+ __le16 vsi_index;
+ u8 reserved[12];
+};
+
+/* Allocate ACL table (indirect 0x0C10) */
+#define ICE_AQC_ACL_KEY_WIDTH 40
+#define ICE_AQC_ACL_KEY_WIDTH_BYTES 5
+#define ICE_AQC_ACL_TCAM_DEPTH 512
+#define ICE_ACL_ENTRY_ALLOC_UNIT 64
+#define ICE_AQC_MAX_CONCURRENT_ACL_TBL 15
+#define ICE_AQC_MAX_ACTION_MEMORIES 20
+#define ICE_AQC_MAX_ACTION_ENTRIES 512
+#define ICE_AQC_ACL_SLICES 16
+#define ICE_AQC_ALLOC_ID_LESS_THAN_4K 0x1000
+/* The ACL block supports up to 8 actions per a single output. */
+#define ICE_AQC_TBL_MAX_ACTION_PAIRS 4
+
+#define ICE_AQC_MAX_TCAM_ALLOC_UNITS (ICE_AQC_ACL_TCAM_DEPTH / \
+ ICE_ACL_ENTRY_ALLOC_UNIT)
+#define ICE_AQC_ACL_ALLOC_UNITS (ICE_AQC_ACL_SLICES * \
+ ICE_AQC_MAX_TCAM_ALLOC_UNITS)
+
+struct ice_aqc_acl_alloc_table {
+ __le16 table_width;
+ __le16 table_depth;
+ u8 act_pairs_per_entry;
+ /* For non-concurrent table allocation, this field needs
+ * to be set to zero(0) otherwise it shall specify the
+ * amount of concurrent tables whose AllocIDs are
+ * specified in buffer. Thus the newly allocated table
+ * is concurrent with table IDs specified in AllocIDs.
+ */
+#define ICE_AQC_ACL_ALLOC_TABLE_TYPE_NONCONCURR 0
+ u8 table_type;
+ __le16 reserved;
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+/* Allocate ACL table command buffer format */
+struct ice_aqc_acl_alloc_table_data {
+ /* Dependent table AllocIDs. Each word in this 15 word array specifies
+ * a dependent table AllocID according to the amount specified in the
+ * "table_type" field. All unused words shall be set to 0xFFFF
+ */
+#define ICE_AQC_CONCURR_ID_INVALID 0xffff
+ __le16 alloc_ids[ICE_AQC_MAX_CONCURRENT_ACL_TBL];
+};
+
+/* Deallocate ACL table (indirect 0x0C11)
+ * Allocate ACL action-pair (indirect 0x0C12)
+ * Deallocate ACL action-pair (indirect 0x0C13)
+ */
+
+/* Following structure is common and used in case of deallocation
+ * of ACL table and action-pair
+ */
+struct ice_aqc_acl_tbl_actpair {
+ /* Alloc ID of the table being released */
+ __le16 alloc_id;
+ u8 reserved[6];
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+/* This response structure is same in case of alloc/dealloc table,
+ * alloc/dealloc action-pair
+ */
+struct ice_aqc_acl_generic {
+ /* if alloc_id is below 0x1000 then alllocation failed due to
+ * unavailable resources, else this is set by FW to identify
+ * table allocation
+ */
+ __le16 alloc_id;
+
+ union {
+ /* to be used only in case of alloc/dealloc table */
+ struct {
+ /* Index of the first TCAM block, otherwise set to 0xFF
+ * for a failed allocation
+ */
+ u8 first_tcam;
+ /* Index of the last TCAM block. This index shall be
+ * set to the value of first_tcam for single TCAM block
+ * allocation, otherwise set to 0xFF for a failed
+ * allocation
+ */
+ u8 last_tcam;
+ } table;
+ /* reserved in case of alloc/dealloc action-pair */
+ struct {
+ __le16 reserved;
+ } act_pair;
+ } ops;
+
+ /* index of first entry (in both TCAM and action memories),
+ * otherwise set to 0xFF for a failed allocation
+ */
+ __le16 first_entry;
+ /* index of last entry (in both TCAM and action memories),
+ * otherwise set to 0xFF for a failed allocation
+ */
+ __le16 last_entry;
+
+ /* Each act_mem element specifies the order of the memory
+ * otherwise 0xFF
+ */
+ u8 act_mem[ICE_AQC_MAX_ACTION_MEMORIES];
+};
+
+/* Allocate ACL scenario (indirect 0x0C14). This command doesn't have separate
+ * response buffer since original command buffer gets updated with
+ * 'scen_id' in case of success
+ */
+struct ice_aqc_acl_alloc_scen {
+ union {
+ struct {
+ u8 reserved[8];
+ } cmd;
+ struct {
+ __le16 scen_id;
+ u8 reserved[6];
+ } resp;
+ } ops;
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+/* De-allocate ACL scenario (direct 0x0C15). This command doesn't need
+ * separate response buffer since nothing to be returned as a response
+ * except status.
+ */
+struct ice_aqc_acl_dealloc_scen {
+ __le16 scen_id;
+ u8 reserved[14];
+};
+
+/* Update ACL scenario (direct 0x0C1B)
+ * Query ACL scenario (direct 0x0C23)
+ */
+struct ice_aqc_acl_update_query_scen {
+ __le16 scen_id;
+ u8 reserved[6];
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+/* Input buffer format in case allocate/update ACL scenario and same format
+ * is used for response buffer in case of query ACL scenario.
+ * NOTE: de-allocate ACL scenario is direct command and doesn't require
+ * "buffer", hence no buffer format.
+ */
+struct ice_aqc_acl_scen {
+ struct {
+ /* Byte [x] selection for the TCAM key. This value must be set
+ * set to 0x0 for unusued TCAM.
+ * Only Bit 6..0 is used in each byte and MSB is reserved
+ */
+#define ICE_AQC_ACL_ALLOC_SCE_SELECT_M 0x7F
+#define ICE_AQC_ACL_BYTE_SEL_BASE 0x20
+#define ICE_AQC_ACL_BYTE_SEL_BASE_PID 0x3E
+#define ICE_AQC_ACL_BYTE_SEL_BASE_PKT_DIR ICE_AQC_ACL_BYTE_SEL_BASE
+#define ICE_AQC_ACL_BYTE_SEL_BASE_RNG_CHK 0x3F
+ u8 tcam_select[5];
+ /* TCAM Block entry masking. This value should be set to 0x0 for
+ * unused TCAM
+ */
+ u8 chnk_msk;
+ /* Bit 0 : masks TCAM entries 0-63
+ * Bit 1 : masks TCAM entries 64-127
+ * Bit 2 to 7 : follow the pattern of bit 0 and 1
+ */
+#define ICE_AQC_ACL_ALLOC_SCE_START_CMP BIT(0)
+#define ICE_AQC_ACL_ALLOC_SCE_START_SET BIT(1)
+ u8 start_cmp_set;
+
+ } tcam_cfg[ICE_AQC_ACL_SLICES];
+
+ /* Each byte, Bit 6..0: Action memory association to a TCAM block,
+ * otherwise it shall be set to 0x0 for disabled memory action.
+ * Bit 7 : Action memory enable for this scenario
+ */
+#define ICE_AQC_ACL_SCE_ACT_MEM_TCAM_ASSOC_M 0x7F
+#define ICE_AQC_ACL_SCE_ACT_MEM_EN BIT(7)
+ u8 act_mem_cfg[ICE_AQC_MAX_ACTION_MEMORIES];
+};
+
+/* Allocate ACL counters (indirect 0x0C16) */
+struct ice_aqc_acl_alloc_counters {
+ /* Amount of contiguous counters requested. Min value is 1 and
+ * max value is 255
+ */
+#define ICE_AQC_ACL_ALLOC_CNT_MIN_AMT 0x1
+#define ICE_AQC_ACL_ALLOC_CNT_MAX_AMT 0xFF
+ u8 counter_amount;
+
+ /* Counter type: 'single counter' which can be configured to count
+ * either bytes or packets
+ */
+#define ICE_AQC_ACL_CNT_TYPE_SINGLE 0x0
+
+ /* Counter type: 'counter pair' which counts number of bytes and number
+ * of packets.
+ */
+#define ICE_AQC_ACL_CNT_TYPE_DUAL 0x1
+ /* requested counter type, single/dual */
+ u8 counters_type;
+
+ /* counter bank allocation shall be 0-3 for 'byte or packet counter' */
+#define ICE_AQC_ACL_MAX_CNT_SINGLE 0x3
+/* counter bank allocation shall be 0-1 for 'byte and packet counter dual' */
+#define ICE_AQC_ACL_MAX_CNT_DUAL 0x1
+ /* requested counter bank allocation */
+ u8 bank_alloc;
+
+ u8 reserved;
+
+ union {
+ /* Applicable only in case of command */
+ struct {
+ u8 reserved[12];
+ } cmd;
+ /* Applicable only in case of response */
+#define ICE_AQC_ACL_ALLOC_CNT_INVAL 0xFFFF
+ struct {
+ /* Index of first allocated counter. 0xFFFF in case
+ * of unsuccessful allocation
+ */
+ __le16 first_counter;
+ /* Index of last allocated counter. 0xFFFF in case
+ * of unsuccessful allocation
+ */
+ __le16 last_counter;
+ u8 rsvd[8];
+ } resp;
+ } ops;
+};
+
+/* De-allocate ACL counters (direct 0x0C17) */
+struct ice_aqc_acl_dealloc_counters {
+ /* first counter being released */
+ __le16 first_counter;
+ /* last counter being released */
+ __le16 last_counter;
+ /* requested counter type, single/dual */
+ u8 counters_type;
+ /* requested counter bank allocation */
+ u8 bank_alloc;
+ u8 reserved[10];
+};
+
+/* De-allocate ACL resources (direct 0x0C1A). Used by SW to release all the
+ * resources allocated for it using a single command
+ */
+struct ice_aqc_acl_dealloc_res {
+ u8 reserved[16];
+};
+
+/* Program ACL actionpair (indirect 0x0C1C)
+ * Query ACL actionpair (indirect 0x0C25)
+ */
+struct ice_aqc_acl_actpair {
+ /* action mem index to program/update */
+ u8 act_mem_index;
+ u8 reserved;
+ /* The entry index in action memory to be programmed/updated */
+ __le16 act_entry_index;
+ __le32 reserved2;
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+/* Input buffer format for program/query action-pair admin command */
+struct ice_acl_act_entry {
+ /* Action priority, values must be between 0..7 */
+#define ICE_AQC_ACT_PRIO_VALID_MAX 7
+#define ICE_AQC_ACT_PRIO_MSK MAKEMASK(0xff, 0)
+ u8 prio;
+ /* Action meta-data identifier. This field should be set to 0x0
+ * for a NOP action
+ */
+#define ICE_AQC_ACT_MDID_S 8
+#define ICE_AQC_ACT_MDID_MSK MAKEMASK(0xff00, ICE_AQC_ACT_MDID_S)
+ u8 mdid;
+ /* Action value */
+#define ICE_AQC_ACT_VALUE_S 16
+#define ICE_AQC_ACT_VALUE_MSK MAKEMASK(0xffff0000, 16)
+ __le16 value;
+};
+
+#define ICE_ACL_NUM_ACT_PER_ACT_PAIR 2
+struct ice_aqc_actpair {
+ struct ice_acl_act_entry act[ICE_ACL_NUM_ACT_PER_ACT_PAIR];
+};
+
+/* Generic format used to describe either input or response buffer
+ * for admin commands related to ACL profile
+ */
+struct ice_aqc_acl_prof_generic_frmt {
+ /* The first byte of the byte selection base is reserved to keep the
+ * first byte of the field vector where the packet direction info is
+ * available. Thus we should start at index 1 of the field vector to
+ * map its entries to the byte selection base.
+ */
+#define ICE_AQC_ACL_PROF_BYTE_SEL_START_IDX 1
+ /* In each byte:
+ * Bit 0..5 = Byte selection for the byte selection base from the
+ * extracted fields (expressed as byte offset in extracted fields).
+ * Applicable values are 0..63
+ * Bit 6..7 = Reserved
+ */
+#define ICE_AQC_ACL_PROF_BYTE_SEL_ELEMS 30
+ u8 byte_selection[ICE_AQC_ACL_PROF_BYTE_SEL_ELEMS];
+ /* In each byte:
+ * Bit 0..4 = Word selection for the word selection base from the
+ * extracted fields (expressed as word offset in extracted fields).
+ * Applicable values are 0..31
+ * Bit 5..7 = Reserved
+ */
+#define ICE_AQC_ACL_PROF_WORD_SEL_ELEMS 32
+ u8 word_selection[ICE_AQC_ACL_PROF_WORD_SEL_ELEMS];
+ /* In each byte:
+ * Bit 0..3 = Double word selection for the double-word selection base
+ * from the extracted fields (expressed as double-word offset in
+ * extracted fields).
+ * Applicable values are 0..15
+ * Bit 4..7 = Reserved
+ */
+#define ICE_AQC_ACL_PROF_DWORD_SEL_ELEMS 15
+ u8 dword_selection[ICE_AQC_ACL_PROF_DWORD_SEL_ELEMS];
+ /* Scenario numbers for individual Physical Function's */
+#define ICE_AQC_ACL_PROF_PF_SCEN_NUM_ELEMS 8
+ u8 pf_scenario_num[ICE_AQC_ACL_PROF_PF_SCEN_NUM_ELEMS];
+};