+/* Update LLDP TLV (indirect 0x0A03) */
+struct ice_aqc_lldp_update_tlv {
+ u8 type; /* only nearest bridge and non-TPMR from 0x0A00 */
+ u8 reserved;
+ __le16 old_len;
+ __le16 new_offset;
+ __le16 new_len;
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+/* Stop LLDP (direct 0x0A05) */
+struct ice_aqc_lldp_stop {
+ u8 command;
+#define ICE_AQ_LLDP_AGENT_STATE_MASK BIT(0)
+#define ICE_AQ_LLDP_AGENT_STOP 0x0
+#define ICE_AQ_LLDP_AGENT_SHUTDOWN ICE_AQ_LLDP_AGENT_STATE_MASK
+#define ICE_AQ_LLDP_AGENT_PERSIST_DIS BIT(1)
+ u8 reserved[15];
+};
+
+/* Start LLDP (direct 0x0A06) */
+struct ice_aqc_lldp_start {
+ u8 command;
+#define ICE_AQ_LLDP_AGENT_START BIT(0)
+#define ICE_AQ_LLDP_AGENT_PERSIST_ENA BIT(1)
+ u8 reserved[15];
+};
+
+/* Get CEE DCBX Oper Config (0x0A07)
+ * The command uses the generic descriptor struct and
+ * returns the struct below as an indirect response.
+ */
+struct ice_aqc_get_cee_dcb_cfg_resp {
+ u8 oper_num_tc;
+ u8 oper_prio_tc[4];
+ u8 oper_tc_bw[8];
+ u8 oper_pfc_en;
+ __le16 oper_app_prio;
+#define ICE_AQC_CEE_APP_FCOE_S 0
+#define ICE_AQC_CEE_APP_FCOE_M (0x7 << ICE_AQC_CEE_APP_FCOE_S)
+#define ICE_AQC_CEE_APP_ISCSI_S 3
+#define ICE_AQC_CEE_APP_ISCSI_M (0x7 << ICE_AQC_CEE_APP_ISCSI_S)
+#define ICE_AQC_CEE_APP_FIP_S 8
+#define ICE_AQC_CEE_APP_FIP_M (0x7 << ICE_AQC_CEE_APP_FIP_S)
+ __le32 tlv_status;
+#define ICE_AQC_CEE_PG_STATUS_S 0
+#define ICE_AQC_CEE_PG_STATUS_M (0x7 << ICE_AQC_CEE_PG_STATUS_S)
+#define ICE_AQC_CEE_PFC_STATUS_S 3
+#define ICE_AQC_CEE_PFC_STATUS_M (0x7 << ICE_AQC_CEE_PFC_STATUS_S)
+#define ICE_AQC_CEE_FCOE_STATUS_S 8
+#define ICE_AQC_CEE_FCOE_STATUS_M (0x7 << ICE_AQC_CEE_FCOE_STATUS_S)
+#define ICE_AQC_CEE_ISCSI_STATUS_S 11
+#define ICE_AQC_CEE_ISCSI_STATUS_M (0x7 << ICE_AQC_CEE_ISCSI_STATUS_S)
+#define ICE_AQC_CEE_FIP_STATUS_S 16
+#define ICE_AQC_CEE_FIP_STATUS_M (0x7 << ICE_AQC_CEE_FIP_STATUS_S)
+ u8 reserved[12];
+};
+
+/* Set Local LLDP MIB (indirect 0x0A08)
+ * Used to replace the local MIB of a given LLDP agent. e.g. DCBX
+ */
+struct ice_aqc_lldp_set_local_mib {
+ u8 type;
+#define SET_LOCAL_MIB_TYPE_DCBX_M BIT(0)
+#define SET_LOCAL_MIB_TYPE_LOCAL_MIB 0
+#define SET_LOCAL_MIB_TYPE_CEE_M BIT(1)
+#define SET_LOCAL_MIB_TYPE_CEE_WILLING 0
+#define SET_LOCAL_MIB_TYPE_CEE_NON_WILLING SET_LOCAL_MIB_TYPE_CEE_M
+ u8 reserved0;
+ __le16 length;
+ u8 reserved1[4];
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+struct ice_aqc_lldp_set_local_mib_resp {
+ u8 status;
+#define SET_LOCAL_MIB_RESP_EVENT_M BIT(0)
+#define SET_LOCAL_MIB_RESP_MIB_CHANGE_SILENT 0
+#define SET_LOCAL_MIB_RESP_MIB_CHANGE_EVENT SET_LOCAL_MIB_RESP_EVENT_M
+ u8 reserved[15];
+};
+
+/* Stop/Start LLDP Agent (direct 0x0A09)
+ * Used for stopping/starting specific LLDP agent. e.g. DCBX.
+ * The same structure is used for the response, with the command field
+ * being used as the status field.
+ */
+struct ice_aqc_lldp_stop_start_specific_agent {
+ u8 command;
+#define ICE_AQC_START_STOP_AGENT_M BIT(0)
+#define ICE_AQC_START_STOP_AGENT_STOP_DCBX 0
+#define ICE_AQC_START_STOP_AGENT_START_DCBX ICE_AQC_START_STOP_AGENT_M
+ u8 reserved[15];
+};