- * This will assign function pointers, adapter-specific functions can
- * override the assignment of generic function pointers by assigning
- * their own adapter-specific function pointers.
- * Does not touch the hardware.
+ * This will assign function pointers, adapter-specific functions can
+ * override the assignment of generic function pointers by assigning
+ * their own adapter-specific function pointers.
+ * Does not touch the hardware.
- * Starts the hardware by filling the bus info structure and media type, clears
- * all on chip counters, initializes receive address registers, multicast
- * table, VLAN filter table, calls routine to set up link and flow control
- * settings, and leaves transmit and receive units disabled and uninitialized
+ * Starts the hardware by filling the bus info structure and media type, clears
+ * all on chip counters, initializes receive address registers, multicast
+ * table, VLAN filter table, calls routine to set up link and flow control
+ * settings, and leaves transmit and receive units disabled and uninitialized
- * ixgbe_init_hw_vf - virtual function hardware initialization
- * @hw: pointer to hardware structure
+ * ixgbe_init_hw_vf - virtual function hardware initialization
+ * @hw: pointer to hardware structure
- * Resets the hardware by reseting the transmit and receive units, masks and
- * clears all interrupts.
+ * Resets the hardware by resetting the transmit and receive units, masks and
+ * clears all interrupts.
- * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
- * disables transmit and receive units. The adapter_stopped flag is used by
- * the shared code and drivers to determine if the adapter is in a stopped
- * state and should not touch the hardware.
+ * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
+ * disables transmit and receive units. The adapter_stopped flag is used by
+ * the shared code and drivers to determine if the adapter is in a stopped
+ * state and should not touch the hardware.
- * ixgbe_mta_vector - Determines bit-vector in multicast table to set
- * @hw: pointer to hardware structure
- * @mc_addr: the multicast address
+ * ixgbe_mta_vector - Determines bit-vector in multicast table to set
+ * @hw: pointer to hardware structure
+ * @mc_addr: the multicast address
- * Extracts the 12 bits, from a multicast address, to determine which
- * bit-vector to set in the multicast table. The hardware uses 12 bits, from
- * incoming rx multicast addresses, to determine the bit-vector to check in
- * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
- * by the MO field of the MCSTCTRL. The MO field is set during initialization
- * to mc_filter_type.
+ * Extracts the 12 bits, from a multicast address, to determine which
+ * bit-vector to set in the multicast table. The hardware uses 12 bits, from
+ * incoming rx multicast addresses, to determine the bit-vector to check in
+ * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
+ * by the MO field of the MCSTCTRL. The MO field is set during initialization
+ * to mc_filter_type.
- * ixgbe_set_rar_vf - set device MAC address
- * @hw: pointer to hardware structure
- * @index: Receive address register to write
- * @addr: Address to put into receive address register
- * @vmdq: VMDq "set" or "pool" index
- * @enable_addr: set flag that address is active
+ * ixgbe_set_rar_vf - set device MAC address
+ * @hw: pointer to hardware structure
+ * @index: Receive address register to write
+ * @addr: Address to put into receive address register
+ * @vmdq: VMDq "set" or "pool" index
+ * @enable_addr: set flag that address is active
**/
s32 ixgbe_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
u32 enable_addr)
**/
s32 ixgbe_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
u32 enable_addr)
- * ixgbe_update_mc_addr_list_vf - Update Multicast addresses
- * @hw: pointer to the HW structure
- * @mc_addr_list: array of multicast addresses to program
- * @mc_addr_count: number of multicast addresses to program
- * @next: caller supplied function to return next address in list
- * @clear: unused
+ * ixgbe_update_mc_addr_list_vf - Update Multicast addresses
+ * @hw: pointer to the HW structure
+ * @mc_addr_list: array of multicast addresses to program
+ * @mc_addr_count: number of multicast addresses to program
+ * @next: caller supplied function to return next address in list
+ * @clear: unused
**/
s32 ixgbe_update_mc_addr_list_vf(struct ixgbe_hw *hw, u8 *mc_addr_list,
u32 mc_addr_count, ixgbe_mc_addr_itr next,
**/
s32 ixgbe_update_mc_addr_list_vf(struct ixgbe_hw *hw, u8 *mc_addr_list,
u32 mc_addr_count, ixgbe_mc_addr_itr next,
- * ixgbevf_update_xcast_mode - Update Multicast mode
- * @hw: pointer to the HW structure
- * @xcast_mode: new multicast mode
+ * ixgbevf_update_xcast_mode - Update Multicast mode
+ * @hw: pointer to the HW structure
+ * @xcast_mode: new multicast mode
- * ixgbe_set_vfta_vf - Set/Unset vlan filter table address
- * @hw: pointer to the HW structure
- * @vlan: 12 bit VLAN ID
- * @vind: unused by VF drivers
- * @vlan_on: if true then set bit, else clear bit
- * @vlvf_bypass: boolean flag indicating updating default pool is okay
+ * ixgbe_set_vfta_vf - Set/Unset vlan filter table address
+ * @hw: pointer to the HW structure
+ * @vlan: 12 bit VLAN ID
+ * @vind: unused by VF drivers
+ * @vlan_on: if true then set bit, else clear bit
+ * @vlvf_bypass: boolean flag indicating updating default pool is okay
**/
s32 ixgbe_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind,
bool vlan_on, bool vlvf_bypass)
**/
s32 ixgbe_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind,
bool vlan_on, bool vlvf_bypass)
- * ixgbe_setup_mac_link_vf - Setup MAC link settings
- * @hw: pointer to hardware structure
- * @speed: new link speed
- * @autoneg_wait_to_complete: true when waiting for completion is needed
+ * ixgbe_setup_mac_link_vf - Setup MAC link settings
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
**/
s32 ixgbe_setup_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed speed,
bool autoneg_wait_to_complete)
**/
s32 ixgbe_setup_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed speed,
bool autoneg_wait_to_complete)
- * ixgbe_check_mac_link_vf - Get link/speed status
- * @hw: pointer to hardware structure
- * @speed: pointer to link speed
- * @link_up: true is link is up, false otherwise
- * @autoneg_wait_to_complete: true when waiting for completion is needed
+ * ixgbe_check_mac_link_vf - Get link/speed status
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: true is link is up, false otherwise
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
**/
s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
bool *link_up, bool autoneg_wait_to_complete)
**/
s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
bool *link_up, bool autoneg_wait_to_complete)
- * ixgbevf_rlpml_set_vf - Set the maximum receive packet length
- * @hw: pointer to the HW structure
- * @max_size: value to assign to max frame size
+ * ixgbevf_rlpml_set_vf - Set the maximum receive packet length
+ * @hw: pointer to the HW structure
+ * @max_size: value to assign to max frame size
- * ixgbevf_negotiate_api_version - Negotiate supported API version
- * @hw: pointer to the HW structure
- * @api: integer containing requested API version
+ * ixgbevf_negotiate_api_version - Negotiate supported API version
+ * @hw: pointer to the HW structure
+ * @api: integer containing requested API version