+ return ret;
+}
+
+/**
+ * Configures the minimal amount of data to inline into WQE
+ * while sending packets.
+ *
+ * - the txq_inline_min has the maximal priority, if this
+ * key is specified in devargs
+ * - if DevX is enabled the inline mode is queried from the
+ * device (HCA attributes and NIC vport context if needed).
+ * - otherwise L2 mode (18 bytes) is assumed for ConnectX-4/4LX
+ * and none (0 bytes) for other NICs
+ *
+ * @param spawn
+ * Verbs device parameters (name, port, switch_info) to spawn.
+ * @param config
+ * Device configuration parameters.
+ */
+static void
+mlx5_set_min_inline(struct mlx5_dev_spawn_data *spawn,
+ struct mlx5_dev_config *config)
+{
+ if (config->txq_inline_min != MLX5_ARG_UNSET) {
+ /* Application defines size of inlined data explicitly. */
+ switch (spawn->pci_dev->id.device_id) {
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
+ if (config->txq_inline_min <
+ (int)MLX5_INLINE_HSIZE_L2) {
+ DRV_LOG(DEBUG,
+ "txq_inline_mix aligned to minimal"
+ " ConnectX-4 required value %d",
+ (int)MLX5_INLINE_HSIZE_L2);
+ config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
+ }
+ break;
+ }
+ goto exit;
+ }
+ if (config->hca_attr.eth_net_offloads) {
+ /* We have DevX enabled, inline mode queried successfully. */
+ switch (config->hca_attr.wqe_inline_mode) {
+ case MLX5_CAP_INLINE_MODE_L2:
+ /* outer L2 header must be inlined. */
+ config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
+ goto exit;
+ case MLX5_CAP_INLINE_MODE_NOT_REQUIRED:
+ /* No inline data are required by NIC. */
+ config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
+ config->hw_vlan_insert =
+ config->hca_attr.wqe_vlan_insert;
+ DRV_LOG(DEBUG, "Tx VLAN insertion is supported");
+ goto exit;
+ case MLX5_CAP_INLINE_MODE_VPORT_CONTEXT:
+ /* inline mode is defined by NIC vport context. */
+ if (!config->hca_attr.eth_virt)
+ break;
+ switch (config->hca_attr.vport_inline_mode) {
+ case MLX5_INLINE_MODE_NONE:
+ config->txq_inline_min =
+ MLX5_INLINE_HSIZE_NONE;
+ goto exit;
+ case MLX5_INLINE_MODE_L2:
+ config->txq_inline_min =
+ MLX5_INLINE_HSIZE_L2;
+ goto exit;
+ case MLX5_INLINE_MODE_IP:
+ config->txq_inline_min =
+ MLX5_INLINE_HSIZE_L3;
+ goto exit;
+ case MLX5_INLINE_MODE_TCP_UDP:
+ config->txq_inline_min =
+ MLX5_INLINE_HSIZE_L4;
+ goto exit;
+ case MLX5_INLINE_MODE_INNER_L2:
+ config->txq_inline_min =
+ MLX5_INLINE_HSIZE_INNER_L2;
+ goto exit;
+ case MLX5_INLINE_MODE_INNER_IP:
+ config->txq_inline_min =
+ MLX5_INLINE_HSIZE_INNER_L3;
+ goto exit;
+ case MLX5_INLINE_MODE_INNER_TCP_UDP:
+ config->txq_inline_min =
+ MLX5_INLINE_HSIZE_INNER_L4;
+ goto exit;
+ }
+ }
+ }
+ /*
+ * We get here if we are unable to deduce
+ * inline data size with DevX. Try PCI ID
+ * to determine old NICs.
+ */
+ switch (spawn->pci_dev->id.device_id) {
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4LX:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF:
+ config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
+ config->hw_vlan_insert = 0;
+ break;
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX5:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX5EX:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
+ /*
+ * These NICs support VLAN insertion from WQE and
+ * report the wqe_vlan_insert flag. But there is the bug
+ * and PFC control may be broken, so disable feature.
+ */
+ config->hw_vlan_insert = 0;
+ config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
+ break;
+ default:
+ config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
+ break;
+ }
+exit:
+ DRV_LOG(DEBUG, "min tx inline configured: %d", config->txq_inline_min);
+}
+
+/**
+ * Configures the metadata mask fields in the shared context.
+ *
+ * @param [in] dev
+ * Pointer to Ethernet device.
+ */
+static void
+mlx5_set_metadata_mask(struct rte_eth_dev *dev)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_ibv_shared *sh = priv->sh;
+ uint32_t meta, mark, reg_c0;
+
+ reg_c0 = ~priv->vport_meta_mask;
+ switch (priv->config.dv_xmeta_en) {
+ case MLX5_XMETA_MODE_LEGACY:
+ meta = UINT32_MAX;
+ mark = MLX5_FLOW_MARK_MASK;
+ break;
+ case MLX5_XMETA_MODE_META16:
+ meta = reg_c0 >> rte_bsf32(reg_c0);
+ mark = MLX5_FLOW_MARK_MASK;
+ break;
+ case MLX5_XMETA_MODE_META32:
+ meta = UINT32_MAX;
+ mark = (reg_c0 >> rte_bsf32(reg_c0)) & MLX5_FLOW_MARK_MASK;
+ break;
+ default:
+ meta = 0;
+ mark = 0;
+ assert(false);
+ break;
+ }
+ if (sh->dv_mark_mask && sh->dv_mark_mask != mark)
+ DRV_LOG(WARNING, "metadata MARK mask mismatche %08X:%08X",
+ sh->dv_mark_mask, mark);
+ else
+ sh->dv_mark_mask = mark;
+ if (sh->dv_meta_mask && sh->dv_meta_mask != meta)
+ DRV_LOG(WARNING, "metadata META mask mismatche %08X:%08X",
+ sh->dv_meta_mask, meta);
+ else
+ sh->dv_meta_mask = meta;
+ if (sh->dv_regc0_mask && sh->dv_regc0_mask != reg_c0)
+ DRV_LOG(WARNING, "metadata reg_c0 mask mismatche %08X:%08X",
+ sh->dv_meta_mask, reg_c0);
+ else
+ sh->dv_regc0_mask = reg_c0;
+ DRV_LOG(DEBUG, "metadata mode %u", priv->config.dv_xmeta_en);
+ DRV_LOG(DEBUG, "metadata MARK mask %08X", sh->dv_mark_mask);
+ DRV_LOG(DEBUG, "metadata META mask %08X", sh->dv_meta_mask);
+ DRV_LOG(DEBUG, "metadata reg_c0 mask %08X", sh->dv_regc0_mask);