+#define MLX5_RSS_HF_MASK (~(RTE_ETH_RSS_IP | RTE_ETH_RSS_UDP | RTE_ETH_RSS_TCP | \
+ MLX5_RSS_SRC_DST_ONLY))
+
+/* Timeout in seconds to get a valid link status. */
+#define MLX5_LINK_STATUS_TIMEOUT 10
+
+/* Number of times to retry retrieving the physical link information. */
+#define MLX5_GET_LINK_STATUS_RETRY_COUNT 3
+
+/* Maximum number of UAR pages used by a port,
+ * These are the size and mask for an array of mutexes used to synchronize
+ * the access to port's UARs on platforms that do not support 64 bit writes.
+ * In such systems it is possible to issue the 64 bits DoorBells through two
+ * consecutive writes, each write 32 bits. The access to a UAR page (which can
+ * be accessible by all threads in the process) must be synchronized
+ * (for example, using a semaphore). Such a synchronization is not required
+ * when ringing DoorBells on different UAR pages.
+ * A port with 512 Tx queues uses 8, 4kBytes, UAR pages which are shared
+ * among the ports.
+ */
+#define MLX5_UAR_PAGE_NUM_MAX 64
+#define MLX5_UAR_PAGE_NUM_MASK ((MLX5_UAR_PAGE_NUM_MAX) - 1)
+
+/* Log 2 of the default number of strides per WQE for Multi-Packet RQ. */
+#define MLX5_MPRQ_DEFAULT_LOG_STRIDE_NUM 6U
+
+/* Log 2 of the default size of a stride per WQE for Multi-Packet RQ. */
+#define MLX5_MPRQ_DEFAULT_LOG_STRIDE_SIZE 11U
+
+/* Two-byte shift is disabled for Multi-Packet RQ. */
+#define MLX5_MPRQ_TWO_BYTE_SHIFT 0
+
+/*
+ * Minimum size of packet to be memcpy'd instead of being attached as an
+ * external buffer.
+ */
+#define MLX5_MPRQ_MEMCPY_DEFAULT_LEN 128
+
+/* Minimum number Rx queues to enable Multi-Packet RQ. */
+#define MLX5_MPRQ_MIN_RXQS 12
+
+/* Cache size of mempool for Multi-Packet RQ. */
+#define MLX5_MPRQ_MP_CACHE_SZ 32U
+
+/* MLX5_DV_XMETA_EN supported values. */
+#define MLX5_XMETA_MODE_LEGACY 0
+#define MLX5_XMETA_MODE_META16 1
+#define MLX5_XMETA_MODE_META32 2
+/* Provide info on patrial hw miss. Implies MLX5_XMETA_MODE_META16 */
+#define MLX5_XMETA_MODE_MISS_INFO 3
+
+/* Tx accurate scheduling on timestamps parameters. */
+#define MLX5_TXPP_WAIT_INIT_TS 1000ul /* How long to wait timestamp. */
+#define MLX5_TXPP_CLKQ_SIZE 1
+#define MLX5_TXPP_REARM ((1UL << MLX5_WQ_INDEX_WIDTH) / 4)
+#define MLX5_TXPP_REARM_SQ_SIZE (((1UL << MLX5_CQ_INDEX_WIDTH) / \
+ MLX5_TXPP_REARM) * 2)
+#define MLX5_TXPP_REARM_CQ_SIZE (MLX5_TXPP_REARM_SQ_SIZE / 2)
+/* The minimal size test packet to put into one WQE, padded by HW. */
+#define MLX5_TXPP_TEST_PKT_SIZE (sizeof(struct rte_ether_hdr) + \
+ sizeof(struct rte_ipv4_hdr))
+
+/* Size of the simple hash table for metadata register table. */
+#define MLX5_FLOW_MREG_HTABLE_SZ 64
+#define MLX5_FLOW_MREG_HNAME "MARK_COPY_TABLE"
+#define MLX5_DEFAULT_COPY_ID UINT32_MAX
+
+/* Size of the simple hash table for header modify table. */
+#define MLX5_FLOW_HDR_MODIFY_HTABLE_SZ (1 << 15)
+
+/* Size of the simple hash table for encap decap table. */
+#define MLX5_FLOW_ENCAP_DECAP_HTABLE_SZ (1 << 12)
+
+/* Size of the hash table for tag table. */
+#define MLX5_TAGS_HLIST_ARRAY_SIZE (1 << 15)
+
+/* Size fo the hash table for SFT table. */
+#define MLX5_FLOW_SFT_HLIST_ARRAY_SIZE 4096
+
+/* Hairpin TX/RX queue configuration parameters. */
+#define MLX5_HAIRPIN_QUEUE_STRIDE 6
+#define MLX5_HAIRPIN_JUMBO_LOG_SIZE (14 + 2)
+
+/* Maximum number of indirect actions supported by rte_flow */
+#define MLX5_MAX_INDIRECT_ACTIONS 3
+
+/*
+ * Linux definition of static_assert is found in /usr/include/assert.h.
+ * Windows does not require a redefinition.
+ */
+#if !defined(HAVE_STATIC_ASSERT) && !defined(RTE_EXEC_ENV_WINDOWS)
+#define static_assert _Static_assert
+#endif