+/*
+ * Request TX completion every time descriptors reach this threshold since
+ * the previous request. Must be a power of two for performance reasons.
+ */
+#define MLX5_TX_COMP_THRESH 32u
+
+/*
+ * Request TX completion every time the total number of WQEBBs used for inlining
+ * packets exceeds the size of WQ divided by this divisor. Better to be power of
+ * two for performance.
+ */
+#define MLX5_TX_COMP_THRESH_INLINE_DIV (1 << 3)
+
+/*
+ * Maximal amount of normal completion CQEs
+ * processed in one call of tx_burst() routine.
+ */
+#define MLX5_TX_COMP_MAX_CQE 2u
+
+
+/* Size of per-queue MR cache array for linear search. */
+#define MLX5_MR_CACHE_N 8
+
+/* Size of MR cache table for binary search. */
+#define MLX5_MR_BTREE_CACHE_N 256
+
+/*
+ * If defined, only use software counters. The PMD will never ask the hardware
+ * for these, and many of them won't be available.
+ */
+#ifndef MLX5_PMD_SOFT_COUNTERS
+#define MLX5_PMD_SOFT_COUNTERS 1
+#endif
+
+/* Switch port ID parameters for bonding configurations. */
+#define MLX5_PORT_ID_BONDING_PF_MASK 0xf
+#define MLX5_PORT_ID_BONDING_PF_SHIFT 12
+
+/* Alarm timeout. */
+#define MLX5_ALARM_TIMEOUT_US 100000
+
+/* Maximum number of extended statistics counters. */
+#define MLX5_MAX_XSTATS 32
+
+/* Maximum Packet headers size (L2+L3+L4) for TSO. */
+#define MLX5_MAX_TSO_HEADER (128u + 34u)
+
+/* Inline data size required by NICs. */
+#define MLX5_INLINE_HSIZE_NONE 0
+#define MLX5_INLINE_HSIZE_L2 (sizeof(struct rte_ether_hdr) + \
+ sizeof(struct rte_vlan_hdr))
+#define MLX5_INLINE_HSIZE_L3 (MLX5_INLINE_HSIZE_L2 + \
+ sizeof(struct rte_ipv6_hdr))
+#define MLX5_INLINE_HSIZE_L4 (MLX5_INLINE_HSIZE_L3 + \
+ sizeof(struct rte_tcp_hdr))
+#define MLX5_INLINE_HSIZE_INNER_L2 (MLX5_INLINE_HSIZE_L3 + \
+ sizeof(struct rte_udp_hdr) + \
+ sizeof(struct rte_vxlan_hdr) + \
+ sizeof(struct rte_ether_hdr) + \
+ sizeof(struct rte_vlan_hdr))
+#define MLX5_INLINE_HSIZE_INNER_L3 (MLX5_INLINE_HSIZE_INNER_L2 + \
+ sizeof(struct rte_ipv6_hdr))
+#define MLX5_INLINE_HSIZE_INNER_L4 (MLX5_INLINE_HSIZE_INNER_L3 + \
+ sizeof(struct rte_tcp_hdr))
+
+/* Threshold of buffer replenishment for vectorized Rx. */
+#define MLX5_VPMD_RXQ_RPLNSH_THRESH(n) \
+ (RTE_MIN(MLX5_VPMD_RX_MAX_BURST, (unsigned int)(n) >> 2))
+
+/* Maximum size of burst for vectorized Rx. */
+#define MLX5_VPMD_RX_MAX_BURST 64U
+
+/* Recommended optimal burst size. */
+#define MLX5_RX_DEFAULT_BURST 64U
+#define MLX5_TX_DEFAULT_BURST 64U
+
+/* Number of packets vectorized Rx can simultaneously process in a loop. */
+#define MLX5_VPMD_DESCS_PER_LOOP 4
+
+/* Mask of RSS on source only or destination only. */
+#define MLX5_RSS_SRC_DST_ONLY (ETH_RSS_L3_SRC_ONLY | ETH_RSS_L3_DST_ONLY | \
+ ETH_RSS_L4_SRC_ONLY | ETH_RSS_L4_DST_ONLY)
+
+/* Supported RSS */
+#define MLX5_RSS_HF_MASK (~(ETH_RSS_IP | ETH_RSS_UDP | ETH_RSS_TCP | \
+ MLX5_RSS_SRC_DST_ONLY))
+
+/* Timeout in seconds to get a valid link status. */
+#define MLX5_LINK_STATUS_TIMEOUT 10
+
+/* Number of times to retry retrieving the physical link information. */
+#define MLX5_GET_LINK_STATUS_RETRY_COUNT 3
+
+/* Maximum number of UAR pages used by a port,
+ * These are the size and mask for an array of mutexes used to synchronize
+ * the access to port's UARs on platforms that do not support 64 bit writes.
+ * In such systems it is possible to issue the 64 bits DoorBells through two
+ * consecutive writes, each write 32 bits. The access to a UAR page (which can
+ * be accessible by all threads in the process) must be synchronized
+ * (for example, using a semaphore). Such a synchronization is not required
+ * when ringing DoorBells on different UAR pages.
+ * A port with 512 Tx queues uses 8, 4kBytes, UAR pages which are shared
+ * among the ports.
+ */
+#define MLX5_UAR_PAGE_NUM_MAX 64
+#define MLX5_UAR_PAGE_NUM_MASK ((MLX5_UAR_PAGE_NUM_MAX) - 1)
+
+/* Fields of memory mapping type in offset parameter of mmap() */
+#define MLX5_UAR_MMAP_CMD_SHIFT 8
+#define MLX5_UAR_MMAP_CMD_MASK 0xff
+
+/* Environment variable to control the doorbell register mapping. */
+#define MLX5_SHUT_UP_BF "MLX5_SHUT_UP_BF"
+#if defined(RTE_ARCH_ARM64)
+#define MLX5_SHUT_UP_BF_DEFAULT "0"
+#else
+#define MLX5_SHUT_UP_BF_DEFAULT "1"