+
+ if (action_flags & MLX5_FLOW_FATE_ACTIONS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 fate actions"
+ " in same flow");
+ if (rss->func != RTE_ETH_HASH_FUNCTION_DEFAULT &&
+ rss->func != RTE_ETH_HASH_FUNCTION_TOEPLITZ)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->func,
+ "RSS hash function not supported");
+#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
+ if (rss->level > 2)
+#else
+ if (rss->level > 1)
+#endif
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->level,
+ "tunnel RSS is not supported");
+ /* allow RSS key_len 0 in case of NULL (default) RSS key. */
+ if (rss->key_len == 0 && rss->key != NULL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->key_len,
+ "RSS hash key length 0");
+ if (rss->key_len > 0 && rss->key_len < MLX5_RSS_HASH_KEY_LEN)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->key_len,
+ "RSS hash key too small");
+ if (rss->key_len > MLX5_RSS_HASH_KEY_LEN)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->key_len,
+ "RSS hash key too large");
+ if (rss->queue_num > priv->config.ind_table_max_size)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->queue_num,
+ "number of queues too large");
+ if (rss->types & MLX5_RSS_HF_MASK)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->types,
+ "some RSS protocols are not"
+ " supported");
+ if (!priv->rxqs_n)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ NULL, "No Rx queues configured");
+ if (!rss->queue_num)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ NULL, "No queues configured");
+ for (i = 0; i != rss->queue_num; ++i) {
+ if (!(*priv->rxqs)[rss->queue[i]])
+ return rte_flow_error_set
+ (error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->queue[i], "queue is not configured");
+ }
+ if (attr->egress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
+ "rss action not supported for "
+ "egress");
+ if (rss->level > 1 && !tunnel)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF, NULL,
+ "inner RSS is not supported for "
+ "non-tunnel flows");
+ return 0;
+}
+
+/*
+ * Validate the count action.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] attr
+ * Attributes of flow that includes this action.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_action_count(struct rte_eth_dev *dev __rte_unused,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ if (attr->egress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
+ "count action not supported for "
+ "egress");
+ return 0;
+}
+
+/**
+ * Verify the @p attributes will be correctly understood by the NIC and store
+ * them in the @p flow if everything is correct.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] attributes
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_attributes(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attributes,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ uint32_t priority_max = priv->config.flow_prio - 1;
+
+ if (attributes->group)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
+ NULL, "groups is not supported");
+ if (attributes->priority != MLX5_FLOW_PRIO_RSVD &&
+ attributes->priority >= priority_max)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
+ NULL, "priority out of range");
+ if (attributes->egress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
+ "egress is not supported");
+ if (attributes->transfer)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,
+ NULL, "transfer is not supported");
+ if (!attributes->ingress)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
+ NULL,
+ "ingress attribute is mandatory");
+ return 0;
+}
+
+/**
+ * Validate Ethernet item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_item_eth(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_eth *mask = item->mask;
+ const struct rte_flow_item_eth nic_mask = {
+ .dst.addr_bytes = "\xff\xff\xff\xff\xff\xff",
+ .src.addr_bytes = "\xff\xff\xff\xff\xff\xff",
+ .type = RTE_BE16(0xffff),
+ };