+ if (target_protocol != 0xff && target_protocol != IPPROTO_GRE)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "protocol filtering not compatible"
+ " with this GRE layer");
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple tunnel layers not"
+ " supported");
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L3))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 Layer is missing");
+ if (!mask)
+ mask = &rte_flow_item_gre_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_gre), error);
+ if (ret < 0)
+ return ret;
+#ifndef HAVE_MLX5DV_DR
+#ifndef HAVE_IBV_DEVICE_MPLS_SUPPORT
+ if (spec && (spec->protocol & mask->protocol))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "without MPLS support the"
+ " specification cannot be used for"
+ " filtering");
+#endif
+#endif
+ return 0;
+}
+
+/**
+ * Validate MPLS item.
+ *
+ * @param[in] dev
+ * Pointer to the rte_eth_dev structure.
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[in] prev_layer
+ * The protocol layer indicated in previous item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_item_mpls(struct rte_eth_dev *dev __rte_unused,
+ const struct rte_flow_item *item __rte_unused,
+ uint64_t item_flags __rte_unused,
+ uint64_t prev_layer __rte_unused,
+ struct rte_flow_error *error)
+{
+#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
+ const struct rte_flow_item_mpls *mask = item->mask;
+ struct mlx5_priv *priv = dev->data->dev_private;
+ int ret;
+
+ if (!priv->config.mpls_en)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "MPLS not supported or"
+ " disabled in firmware"
+ " configuration.");
+ /* MPLS over IP, UDP, GRE is allowed */
+ if (!(prev_layer & (MLX5_FLOW_LAYER_OUTER_L3 |
+ MLX5_FLOW_LAYER_OUTER_L4_UDP |
+ MLX5_FLOW_LAYER_GRE)))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "protocol filtering not compatible"
+ " with MPLS layer");
+ /* Multi-tunnel isn't allowed but MPLS over GRE is an exception. */
+ if ((item_flags & MLX5_FLOW_LAYER_TUNNEL) &&
+ !(item_flags & MLX5_FLOW_LAYER_GRE))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple tunnel layers not"
+ " supported");
+ if (!mask)
+ mask = &rte_flow_item_mpls_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_mpls_mask,
+ sizeof(struct rte_flow_item_mpls), error);
+ if (ret < 0)
+ return ret;
+ return 0;
+#endif
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "MPLS is not supported by Verbs, please"
+ " update.");
+}
+
+/**
+ * Validate NVGRE item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit flags to mark detected items.
+ * @param[in] target_protocol
+ * The next protocol in the previous item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_item_nvgre(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ uint8_t target_protocol,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_nvgre *mask = item->mask;
+ int ret;
+
+ if (target_protocol != 0xff && target_protocol != IPPROTO_GRE)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "protocol filtering not compatible"
+ " with this GRE layer");
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple tunnel layers not"
+ " supported");
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L3))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 Layer is missing");
+ if (!mask)
+ mask = &rte_flow_item_nvgre_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_nvgre_mask,
+ sizeof(struct rte_flow_item_nvgre), error);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+static int
+flow_null_validate(struct rte_eth_dev *dev __rte_unused,
+ const struct rte_flow_attr *attr __rte_unused,
+ const struct rte_flow_item items[] __rte_unused,
+ const struct rte_flow_action actions[] __rte_unused,
+ struct rte_flow_error *error)
+{
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
+}
+
+static struct mlx5_flow *
+flow_null_prepare(const struct rte_flow_attr *attr __rte_unused,
+ const struct rte_flow_item items[] __rte_unused,
+ const struct rte_flow_action actions[] __rte_unused,
+ struct rte_flow_error *error)
+{
+ rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
+ return NULL;
+}
+
+static int
+flow_null_translate(struct rte_eth_dev *dev __rte_unused,
+ struct mlx5_flow *dev_flow __rte_unused,
+ const struct rte_flow_attr *attr __rte_unused,
+ const struct rte_flow_item items[] __rte_unused,
+ const struct rte_flow_action actions[] __rte_unused,
+ struct rte_flow_error *error)
+{
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
+}
+
+static int
+flow_null_apply(struct rte_eth_dev *dev __rte_unused,
+ struct rte_flow *flow __rte_unused,
+ struct rte_flow_error *error)
+{
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
+}
+
+static void
+flow_null_remove(struct rte_eth_dev *dev __rte_unused,
+ struct rte_flow *flow __rte_unused)
+{
+}
+
+static void
+flow_null_destroy(struct rte_eth_dev *dev __rte_unused,
+ struct rte_flow *flow __rte_unused)
+{
+}
+
+static int
+flow_null_query(struct rte_eth_dev *dev __rte_unused,
+ struct rte_flow *flow __rte_unused,
+ const struct rte_flow_action *actions __rte_unused,
+ void *data __rte_unused,
+ struct rte_flow_error *error)
+{
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
+}
+
+/* Void driver to protect from null pointer reference. */
+const struct mlx5_flow_driver_ops mlx5_flow_null_drv_ops = {
+ .validate = flow_null_validate,
+ .prepare = flow_null_prepare,
+ .translate = flow_null_translate,
+ .apply = flow_null_apply,
+ .remove = flow_null_remove,
+ .destroy = flow_null_destroy,
+ .query = flow_null_query,
+};
+
+/**
+ * Select flow driver type according to flow attributes and device
+ * configuration.
+ *
+ * @param[in] dev
+ * Pointer to the dev structure.
+ * @param[in] attr
+ * Pointer to the flow attributes.
+ *
+ * @return
+ * flow driver type, MLX5_FLOW_TYPE_MAX otherwise.
+ */
+static enum mlx5_flow_drv_type
+flow_get_drv_type(struct rte_eth_dev *dev, const struct rte_flow_attr *attr)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ enum mlx5_flow_drv_type type = MLX5_FLOW_TYPE_MAX;
+
+ if (attr->transfer && priv->config.dv_esw_en)
+ type = MLX5_FLOW_TYPE_DV;
+ if (!attr->transfer)
+ type = priv->config.dv_flow_en ? MLX5_FLOW_TYPE_DV :
+ MLX5_FLOW_TYPE_VERBS;
+ return type;
+}
+
+#define flow_get_drv_ops(type) flow_drv_ops[type]
+
+/**
+ * Flow driver validation API. This abstracts calling driver specific functions.
+ * The type of flow driver is determined according to flow attributes.
+ *
+ * @param[in] dev
+ * Pointer to the dev structure.
+ * @param[in] attr
+ * Pointer to the flow attributes.
+ * @param[in] items
+ * Pointer to the list of items.
+ * @param[in] actions
+ * Pointer to the list of actions.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static inline int
+flow_drv_validate(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ const struct mlx5_flow_driver_ops *fops;
+ enum mlx5_flow_drv_type type = flow_get_drv_type(dev, attr);
+
+ fops = flow_get_drv_ops(type);
+ return fops->validate(dev, attr, items, actions, error);
+}
+
+/**
+ * Flow driver preparation API. This abstracts calling driver specific
+ * functions. Parent flow (rte_flow) should have driver type (drv_type). It
+ * calculates the size of memory required for device flow, allocates the memory,
+ * initializes the device flow and returns the pointer.
+ *
+ * @note
+ * This function initializes device flow structure such as dv or verbs in
+ * struct mlx5_flow. However, it is caller's responsibility to initialize the
+ * rest. For example, adding returning device flow to flow->dev_flow list and
+ * setting backward reference to the flow should be done out of this function.
+ * layers field is not filled either.
+ *
+ * @param[in] attr
+ * Pointer to the flow attributes.
+ * @param[in] items
+ * Pointer to the list of items.
+ * @param[in] actions
+ * Pointer to the list of actions.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * Pointer to device flow on success, otherwise NULL and rte_errno is set.
+ */
+static inline struct mlx5_flow *
+flow_drv_prepare(const struct rte_flow *flow,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ const struct mlx5_flow_driver_ops *fops;
+ enum mlx5_flow_drv_type type = flow->drv_type;
+
+ assert(type > MLX5_FLOW_TYPE_MIN && type < MLX5_FLOW_TYPE_MAX);
+ fops = flow_get_drv_ops(type);
+ return fops->prepare(attr, items, actions, error);
+}
+
+/**
+ * Flow driver translation API. This abstracts calling driver specific
+ * functions. Parent flow (rte_flow) should have driver type (drv_type). It
+ * translates a generic flow into a driver flow. flow_drv_prepare() must
+ * precede.
+ *
+ * @note
+ * dev_flow->layers could be filled as a result of parsing during translation
+ * if needed by flow_drv_apply(). dev_flow->flow->actions can also be filled
+ * if necessary. As a flow can have multiple dev_flows by RSS flow expansion,
+ * flow->actions could be overwritten even though all the expanded dev_flows
+ * have the same actions.
+ *
+ * @param[in] dev
+ * Pointer to the rte dev structure.
+ * @param[in, out] dev_flow
+ * Pointer to the mlx5 flow.
+ * @param[in] attr
+ * Pointer to the flow attributes.
+ * @param[in] items
+ * Pointer to the list of items.
+ * @param[in] actions
+ * Pointer to the list of actions.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static inline int
+flow_drv_translate(struct rte_eth_dev *dev, struct mlx5_flow *dev_flow,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ const struct mlx5_flow_driver_ops *fops;
+ enum mlx5_flow_drv_type type = dev_flow->flow->drv_type;
+
+ assert(type > MLX5_FLOW_TYPE_MIN && type < MLX5_FLOW_TYPE_MAX);
+ fops = flow_get_drv_ops(type);
+ return fops->translate(dev, dev_flow, attr, items, actions, error);
+}
+
+/**
+ * Flow driver apply API. This abstracts calling driver specific functions.
+ * Parent flow (rte_flow) should have driver type (drv_type). It applies
+ * translated driver flows on to device. flow_drv_translate() must precede.
+ *
+ * @param[in] dev
+ * Pointer to Ethernet device structure.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static inline int
+flow_drv_apply(struct rte_eth_dev *dev, struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ const struct mlx5_flow_driver_ops *fops;
+ enum mlx5_flow_drv_type type = flow->drv_type;
+
+ assert(type > MLX5_FLOW_TYPE_MIN && type < MLX5_FLOW_TYPE_MAX);
+ fops = flow_get_drv_ops(type);
+ return fops->apply(dev, flow, error);
+}
+
+/**
+ * Flow driver remove API. This abstracts calling driver specific functions.
+ * Parent flow (rte_flow) should have driver type (drv_type). It removes a flow
+ * on device. All the resources of the flow should be freed by calling
+ * flow_drv_destroy().
+ *
+ * @param[in] dev
+ * Pointer to Ethernet device.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ */
+static inline void
+flow_drv_remove(struct rte_eth_dev *dev, struct rte_flow *flow)
+{
+ const struct mlx5_flow_driver_ops *fops;
+ enum mlx5_flow_drv_type type = flow->drv_type;
+
+ assert(type > MLX5_FLOW_TYPE_MIN && type < MLX5_FLOW_TYPE_MAX);
+ fops = flow_get_drv_ops(type);
+ fops->remove(dev, flow);
+}
+
+/**
+ * Flow driver destroy API. This abstracts calling driver specific functions.
+ * Parent flow (rte_flow) should have driver type (drv_type). It removes a flow
+ * on device and releases resources of the flow.
+ *
+ * @param[in] dev
+ * Pointer to Ethernet device.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ */
+static inline void
+flow_drv_destroy(struct rte_eth_dev *dev, struct rte_flow *flow)
+{
+ const struct mlx5_flow_driver_ops *fops;
+ enum mlx5_flow_drv_type type = flow->drv_type;
+
+ assert(type > MLX5_FLOW_TYPE_MIN && type < MLX5_FLOW_TYPE_MAX);
+ fops = flow_get_drv_ops(type);
+ fops->destroy(dev, flow);
+}
+
+/**
+ * Validate a flow supported by the NIC.
+ *
+ * @see rte_flow_validate()
+ * @see rte_flow_ops
+ */
+int
+mlx5_flow_validate(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ int ret;
+
+ ret = flow_drv_validate(dev, attr, items, actions, error);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+/**
+ * Get RSS action from the action list.
+ *
+ * @param[in] actions
+ * Pointer to the list of actions.
+ *
+ * @return
+ * Pointer to the RSS action if exist, else return NULL.
+ */
+static const struct rte_flow_action_rss*
+flow_get_rss_action(const struct rte_flow_action actions[])
+{
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+ switch (actions->type) {
+ case RTE_FLOW_ACTION_TYPE_RSS:
+ return (const struct rte_flow_action_rss *)
+ actions->conf;
+ default:
+ break;