+#include <sys/queue.h>
+#include <stdalign.h>
+#include <stdint.h>
+#include <string.h>
+
+/* Verbs header. */
+/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
+#ifdef PEDANTIC
+#pragma GCC diagnostic ignored "-Wpedantic"
+#endif
+#include <infiniband/verbs.h>
+#ifdef PEDANTIC
+#pragma GCC diagnostic error "-Wpedantic"
+#endif
+
+#include <rte_common.h>
+#include <rte_ether.h>
+#include <rte_ethdev_driver.h>
+#include <rte_flow.h>
+#include <rte_flow_driver.h>
+#include <rte_malloc.h>
+#include <rte_ip.h>
+#include <rte_gre.h>
+
+#include "mlx5.h"
+#include "mlx5_defs.h"
+#include "mlx5_glue.h"
+#include "mlx5_flow.h"
+#include "mlx5_prm.h"
+#include "mlx5_rxtx.h"
+
+#ifdef HAVE_IBV_FLOW_DV_SUPPORT
+
+#ifndef HAVE_IBV_FLOW_DEVX_COUNTERS
+#define MLX5DV_FLOW_ACTION_COUNTERS_DEVX 0
+#endif
+
+#ifndef HAVE_MLX5DV_DR_ESWITCH
+#ifndef MLX5DV_FLOW_TABLE_TYPE_FDB
+#define MLX5DV_FLOW_TABLE_TYPE_FDB 0
+#endif
+#endif
+
+#ifndef HAVE_MLX5DV_DR
+#define MLX5DV_DR_ACTION_FLAGS_ROOT_LEVEL 1
+#endif
+
+union flow_dv_attr {
+ struct {
+ uint32_t valid:1;
+ uint32_t ipv4:1;
+ uint32_t ipv6:1;
+ uint32_t tcp:1;
+ uint32_t udp:1;
+ uint32_t reserved:27;
+ };
+ uint32_t attr;
+};
+
+/**
+ * Initialize flow attributes structure according to flow items' types.
+ *
+ * @param[in] item
+ * Pointer to item specification.
+ * @param[out] attr
+ * Pointer to flow attributes structure.
+ */
+static void
+flow_dv_attr_init(const struct rte_flow_item *item, union flow_dv_attr *attr)
+{
+ for (; item->type != RTE_FLOW_ITEM_TYPE_END; item++) {
+ switch (item->type) {
+ case RTE_FLOW_ITEM_TYPE_IPV4:
+ attr->ipv4 = 1;
+ break;
+ case RTE_FLOW_ITEM_TYPE_IPV6:
+ attr->ipv6 = 1;
+ break;
+ case RTE_FLOW_ITEM_TYPE_UDP:
+ attr->udp = 1;
+ break;
+ case RTE_FLOW_ITEM_TYPE_TCP:
+ attr->tcp = 1;
+ break;
+ default:
+ break;
+ }
+ }
+ attr->valid = 1;
+}
+
+struct field_modify_info {
+ uint32_t size; /* Size of field in protocol header, in bytes. */
+ uint32_t offset; /* Offset of field in protocol header, in bytes. */
+ enum mlx5_modification_field id;
+};
+
+struct field_modify_info modify_eth[] = {
+ {4, 0, MLX5_MODI_OUT_DMAC_47_16},
+ {2, 4, MLX5_MODI_OUT_DMAC_15_0},
+ {4, 6, MLX5_MODI_OUT_SMAC_47_16},
+ {2, 10, MLX5_MODI_OUT_SMAC_15_0},
+ {0, 0, 0},
+};
+
+struct field_modify_info modify_ipv4[] = {
+ {1, 8, MLX5_MODI_OUT_IPV4_TTL},
+ {4, 12, MLX5_MODI_OUT_SIPV4},
+ {4, 16, MLX5_MODI_OUT_DIPV4},
+ {0, 0, 0},
+};
+
+struct field_modify_info modify_ipv6[] = {
+ {1, 7, MLX5_MODI_OUT_IPV6_HOPLIMIT},
+ {4, 8, MLX5_MODI_OUT_SIPV6_127_96},
+ {4, 12, MLX5_MODI_OUT_SIPV6_95_64},
+ {4, 16, MLX5_MODI_OUT_SIPV6_63_32},
+ {4, 20, MLX5_MODI_OUT_SIPV6_31_0},
+ {4, 24, MLX5_MODI_OUT_DIPV6_127_96},
+ {4, 28, MLX5_MODI_OUT_DIPV6_95_64},
+ {4, 32, MLX5_MODI_OUT_DIPV6_63_32},
+ {4, 36, MLX5_MODI_OUT_DIPV6_31_0},
+ {0, 0, 0},
+};
+
+struct field_modify_info modify_udp[] = {
+ {2, 0, MLX5_MODI_OUT_UDP_SPORT},
+ {2, 2, MLX5_MODI_OUT_UDP_DPORT},
+ {0, 0, 0},
+};
+
+struct field_modify_info modify_tcp[] = {
+ {2, 0, MLX5_MODI_OUT_TCP_SPORT},
+ {2, 2, MLX5_MODI_OUT_TCP_DPORT},
+ {4, 4, MLX5_MODI_OUT_TCP_SEQ_NUM},
+ {4, 8, MLX5_MODI_OUT_TCP_ACK_NUM},
+ {0, 0, 0},
+};
+
+/**
+ * Acquire the synchronizing object to protect multithreaded access
+ * to shared dv context. Lock occurs only if context is actually
+ * shared, i.e. we have multiport IB device and representors are
+ * created.
+ *
+ * @param[in] dev
+ * Pointer to the rte_eth_dev structure.
+ */
+static void
+flow_d_shared_lock(struct rte_eth_dev *dev)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_ibv_shared *sh = priv->sh;
+
+ if (sh->dv_refcnt > 1) {
+ int ret;
+
+ ret = pthread_mutex_lock(&sh->dv_mutex);
+ assert(!ret);
+ (void)ret;
+ }
+}
+
+static void
+flow_d_shared_unlock(struct rte_eth_dev *dev)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_ibv_shared *sh = priv->sh;
+
+ if (sh->dv_refcnt > 1) {
+ int ret;
+
+ ret = pthread_mutex_unlock(&sh->dv_mutex);
+ assert(!ret);
+ (void)ret;
+ }
+}
+
+/**
+ * Convert modify-header action to DV specification.
+ *
+ * @param[in] item
+ * Pointer to item specification.
+ * @param[in] field
+ * Pointer to field modification information.
+ * @param[in,out] resource
+ * Pointer to the modify-header resource.
+ * @param[in] type
+ * Type of modification.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_modify_action(struct rte_flow_item *item,
+ struct field_modify_info *field,
+ struct mlx5_flow_dv_modify_hdr_resource *resource,
+ uint32_t type,
+ struct rte_flow_error *error)
+{
+ uint32_t i = resource->actions_num;
+ struct mlx5_modification_cmd *actions = resource->actions;
+ const uint8_t *spec = item->spec;
+ const uint8_t *mask = item->mask;
+ uint32_t set;
+
+ while (field->size) {
+ set = 0;
+ /* Generate modify command for each mask segment. */
+ memcpy(&set, &mask[field->offset], field->size);
+ if (set) {
+ if (i >= MLX5_MODIFY_NUM)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "too many items to modify");
+ actions[i].action_type = type;
+ actions[i].field = field->id;
+ actions[i].length = field->size ==
+ 4 ? 0 : field->size * 8;
+ rte_memcpy(&actions[i].data[4 - field->size],
+ &spec[field->offset], field->size);
+ actions[i].data0 = rte_cpu_to_be_32(actions[i].data0);
+ ++i;
+ }
+ if (resource->actions_num != i)
+ resource->actions_num = i;
+ field++;
+ }
+ if (!resource->actions_num)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "invalid modification flow item");
+ return 0;
+}
+
+/**
+ * Convert modify-header set IPv4 address action to DV specification.
+ *
+ * @param[in,out] resource
+ * Pointer to the modify-header resource.
+ * @param[in] action
+ * Pointer to action specification.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_action_modify_ipv4
+ (struct mlx5_flow_dv_modify_hdr_resource *resource,
+ const struct rte_flow_action *action,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_set_ipv4 *conf =
+ (const struct rte_flow_action_set_ipv4 *)(action->conf);
+ struct rte_flow_item item = { .type = RTE_FLOW_ITEM_TYPE_IPV4 };
+ struct rte_flow_item_ipv4 ipv4;
+ struct rte_flow_item_ipv4 ipv4_mask;
+
+ memset(&ipv4, 0, sizeof(ipv4));
+ memset(&ipv4_mask, 0, sizeof(ipv4_mask));
+ if (action->type == RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC) {
+ ipv4.hdr.src_addr = conf->ipv4_addr;
+ ipv4_mask.hdr.src_addr = rte_flow_item_ipv4_mask.hdr.src_addr;
+ } else {
+ ipv4.hdr.dst_addr = conf->ipv4_addr;
+ ipv4_mask.hdr.dst_addr = rte_flow_item_ipv4_mask.hdr.dst_addr;
+ }
+ item.spec = &ipv4;
+ item.mask = &ipv4_mask;
+ return flow_dv_convert_modify_action(&item, modify_ipv4, resource,
+ MLX5_MODIFICATION_TYPE_SET, error);
+}
+
+/**
+ * Convert modify-header set IPv6 address action to DV specification.
+ *
+ * @param[in,out] resource
+ * Pointer to the modify-header resource.
+ * @param[in] action
+ * Pointer to action specification.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_action_modify_ipv6
+ (struct mlx5_flow_dv_modify_hdr_resource *resource,
+ const struct rte_flow_action *action,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_set_ipv6 *conf =
+ (const struct rte_flow_action_set_ipv6 *)(action->conf);
+ struct rte_flow_item item = { .type = RTE_FLOW_ITEM_TYPE_IPV6 };
+ struct rte_flow_item_ipv6 ipv6;
+ struct rte_flow_item_ipv6 ipv6_mask;
+
+ memset(&ipv6, 0, sizeof(ipv6));
+ memset(&ipv6_mask, 0, sizeof(ipv6_mask));
+ if (action->type == RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC) {
+ memcpy(&ipv6.hdr.src_addr, &conf->ipv6_addr,
+ sizeof(ipv6.hdr.src_addr));
+ memcpy(&ipv6_mask.hdr.src_addr,
+ &rte_flow_item_ipv6_mask.hdr.src_addr,
+ sizeof(ipv6.hdr.src_addr));
+ } else {
+ memcpy(&ipv6.hdr.dst_addr, &conf->ipv6_addr,
+ sizeof(ipv6.hdr.dst_addr));
+ memcpy(&ipv6_mask.hdr.dst_addr,
+ &rte_flow_item_ipv6_mask.hdr.dst_addr,
+ sizeof(ipv6.hdr.dst_addr));
+ }
+ item.spec = &ipv6;
+ item.mask = &ipv6_mask;
+ return flow_dv_convert_modify_action(&item, modify_ipv6, resource,
+ MLX5_MODIFICATION_TYPE_SET, error);
+}
+
+/**
+ * Convert modify-header set MAC address action to DV specification.
+ *
+ * @param[in,out] resource
+ * Pointer to the modify-header resource.
+ * @param[in] action
+ * Pointer to action specification.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_action_modify_mac
+ (struct mlx5_flow_dv_modify_hdr_resource *resource,
+ const struct rte_flow_action *action,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_set_mac *conf =
+ (const struct rte_flow_action_set_mac *)(action->conf);
+ struct rte_flow_item item = { .type = RTE_FLOW_ITEM_TYPE_ETH };
+ struct rte_flow_item_eth eth;
+ struct rte_flow_item_eth eth_mask;
+
+ memset(ð, 0, sizeof(eth));
+ memset(ð_mask, 0, sizeof(eth_mask));
+ if (action->type == RTE_FLOW_ACTION_TYPE_SET_MAC_SRC) {
+ memcpy(ð.src.addr_bytes, &conf->mac_addr,
+ sizeof(eth.src.addr_bytes));
+ memcpy(ð_mask.src.addr_bytes,
+ &rte_flow_item_eth_mask.src.addr_bytes,
+ sizeof(eth_mask.src.addr_bytes));
+ } else {
+ memcpy(ð.dst.addr_bytes, &conf->mac_addr,
+ sizeof(eth.dst.addr_bytes));
+ memcpy(ð_mask.dst.addr_bytes,
+ &rte_flow_item_eth_mask.dst.addr_bytes,
+ sizeof(eth_mask.dst.addr_bytes));
+ }
+ item.spec = ð
+ item.mask = ð_mask;
+ return flow_dv_convert_modify_action(&item, modify_eth, resource,
+ MLX5_MODIFICATION_TYPE_SET, error);
+}
+
+/**
+ * Convert modify-header set TP action to DV specification.
+ *
+ * @param[in,out] resource
+ * Pointer to the modify-header resource.
+ * @param[in] action
+ * Pointer to action specification.
+ * @param[in] items
+ * Pointer to rte_flow_item objects list.
+ * @param[in] attr
+ * Pointer to flow attributes structure.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_action_modify_tp
+ (struct mlx5_flow_dv_modify_hdr_resource *resource,
+ const struct rte_flow_action *action,
+ const struct rte_flow_item *items,
+ union flow_dv_attr *attr,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_set_tp *conf =
+ (const struct rte_flow_action_set_tp *)(action->conf);
+ struct rte_flow_item item;
+ struct rte_flow_item_udp udp;
+ struct rte_flow_item_udp udp_mask;
+ struct rte_flow_item_tcp tcp;
+ struct rte_flow_item_tcp tcp_mask;
+ struct field_modify_info *field;
+
+ if (!attr->valid)
+ flow_dv_attr_init(items, attr);
+ if (attr->udp) {
+ memset(&udp, 0, sizeof(udp));
+ memset(&udp_mask, 0, sizeof(udp_mask));
+ if (action->type == RTE_FLOW_ACTION_TYPE_SET_TP_SRC) {
+ udp.hdr.src_port = conf->port;
+ udp_mask.hdr.src_port =
+ rte_flow_item_udp_mask.hdr.src_port;
+ } else {
+ udp.hdr.dst_port = conf->port;
+ udp_mask.hdr.dst_port =
+ rte_flow_item_udp_mask.hdr.dst_port;
+ }
+ item.type = RTE_FLOW_ITEM_TYPE_UDP;
+ item.spec = &udp;
+ item.mask = &udp_mask;
+ field = modify_udp;
+ }
+ if (attr->tcp) {
+ memset(&tcp, 0, sizeof(tcp));
+ memset(&tcp_mask, 0, sizeof(tcp_mask));
+ if (action->type == RTE_FLOW_ACTION_TYPE_SET_TP_SRC) {
+ tcp.hdr.src_port = conf->port;
+ tcp_mask.hdr.src_port =
+ rte_flow_item_tcp_mask.hdr.src_port;
+ } else {
+ tcp.hdr.dst_port = conf->port;
+ tcp_mask.hdr.dst_port =
+ rte_flow_item_tcp_mask.hdr.dst_port;
+ }
+ item.type = RTE_FLOW_ITEM_TYPE_TCP;
+ item.spec = &tcp;
+ item.mask = &tcp_mask;
+ field = modify_tcp;
+ }
+ return flow_dv_convert_modify_action(&item, field, resource,
+ MLX5_MODIFICATION_TYPE_SET, error);
+}
+
+/**
+ * Convert modify-header set TTL action to DV specification.
+ *
+ * @param[in,out] resource
+ * Pointer to the modify-header resource.
+ * @param[in] action
+ * Pointer to action specification.
+ * @param[in] items
+ * Pointer to rte_flow_item objects list.
+ * @param[in] attr
+ * Pointer to flow attributes structure.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_action_modify_ttl
+ (struct mlx5_flow_dv_modify_hdr_resource *resource,
+ const struct rte_flow_action *action,
+ const struct rte_flow_item *items,
+ union flow_dv_attr *attr,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_set_ttl *conf =
+ (const struct rte_flow_action_set_ttl *)(action->conf);
+ struct rte_flow_item item;
+ struct rte_flow_item_ipv4 ipv4;
+ struct rte_flow_item_ipv4 ipv4_mask;
+ struct rte_flow_item_ipv6 ipv6;
+ struct rte_flow_item_ipv6 ipv6_mask;
+ struct field_modify_info *field;
+
+ if (!attr->valid)
+ flow_dv_attr_init(items, attr);
+ if (attr->ipv4) {
+ memset(&ipv4, 0, sizeof(ipv4));
+ memset(&ipv4_mask, 0, sizeof(ipv4_mask));
+ ipv4.hdr.time_to_live = conf->ttl_value;
+ ipv4_mask.hdr.time_to_live = 0xFF;
+ item.type = RTE_FLOW_ITEM_TYPE_IPV4;
+ item.spec = &ipv4;
+ item.mask = &ipv4_mask;
+ field = modify_ipv4;
+ }
+ if (attr->ipv6) {
+ memset(&ipv6, 0, sizeof(ipv6));
+ memset(&ipv6_mask, 0, sizeof(ipv6_mask));
+ ipv6.hdr.hop_limits = conf->ttl_value;
+ ipv6_mask.hdr.hop_limits = 0xFF;
+ item.type = RTE_FLOW_ITEM_TYPE_IPV6;
+ item.spec = &ipv6;
+ item.mask = &ipv6_mask;
+ field = modify_ipv6;
+ }
+ return flow_dv_convert_modify_action(&item, field, resource,
+ MLX5_MODIFICATION_TYPE_SET, error);
+}
+
+/**
+ * Convert modify-header decrement TTL action to DV specification.
+ *
+ * @param[in,out] resource
+ * Pointer to the modify-header resource.
+ * @param[in] action
+ * Pointer to action specification.
+ * @param[in] items
+ * Pointer to rte_flow_item objects list.
+ * @param[in] attr
+ * Pointer to flow attributes structure.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_action_modify_dec_ttl
+ (struct mlx5_flow_dv_modify_hdr_resource *resource,
+ const struct rte_flow_item *items,
+ union flow_dv_attr *attr,
+ struct rte_flow_error *error)
+{
+ struct rte_flow_item item;
+ struct rte_flow_item_ipv4 ipv4;
+ struct rte_flow_item_ipv4 ipv4_mask;
+ struct rte_flow_item_ipv6 ipv6;
+ struct rte_flow_item_ipv6 ipv6_mask;
+ struct field_modify_info *field;
+
+ if (!attr->valid)
+ flow_dv_attr_init(items, attr);
+ if (attr->ipv4) {
+ memset(&ipv4, 0, sizeof(ipv4));
+ memset(&ipv4_mask, 0, sizeof(ipv4_mask));
+ ipv4.hdr.time_to_live = 0xFF;
+ ipv4_mask.hdr.time_to_live = 0xFF;
+ item.type = RTE_FLOW_ITEM_TYPE_IPV4;
+ item.spec = &ipv4;
+ item.mask = &ipv4_mask;
+ field = modify_ipv4;
+ }
+ if (attr->ipv6) {
+ memset(&ipv6, 0, sizeof(ipv6));
+ memset(&ipv6_mask, 0, sizeof(ipv6_mask));
+ ipv6.hdr.hop_limits = 0xFF;
+ ipv6_mask.hdr.hop_limits = 0xFF;
+ item.type = RTE_FLOW_ITEM_TYPE_IPV6;
+ item.spec = &ipv6;
+ item.mask = &ipv6_mask;
+ field = modify_ipv6;
+ }
+ return flow_dv_convert_modify_action(&item, field, resource,
+ MLX5_MODIFICATION_TYPE_ADD, error);
+}
+
+/**
+ * Convert modify-header increment/decrement TCP Sequence number
+ * to DV specification.
+ *
+ * @param[in,out] resource
+ * Pointer to the modify-header resource.
+ * @param[in] action
+ * Pointer to action specification.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_action_modify_tcp_seq
+ (struct mlx5_flow_dv_modify_hdr_resource *resource,
+ const struct rte_flow_action *action,
+ struct rte_flow_error *error)
+{
+ const rte_be32_t *conf = (const rte_be32_t *)(action->conf);
+ uint64_t value = rte_be_to_cpu_32(*conf);
+ struct rte_flow_item item;
+ struct rte_flow_item_tcp tcp;
+ struct rte_flow_item_tcp tcp_mask;
+
+ memset(&tcp, 0, sizeof(tcp));
+ memset(&tcp_mask, 0, sizeof(tcp_mask));
+ if (action->type == RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ)
+ /*
+ * The HW has no decrement operation, only increment operation.
+ * To simulate decrement X from Y using increment operation
+ * we need to add UINT32_MAX X times to Y.
+ * Each adding of UINT32_MAX decrements Y by 1.
+ */
+ value *= UINT32_MAX;
+ tcp.hdr.sent_seq = rte_cpu_to_be_32((uint32_t)value);
+ tcp_mask.hdr.sent_seq = RTE_BE32(UINT32_MAX);
+ item.type = RTE_FLOW_ITEM_TYPE_TCP;
+ item.spec = &tcp;
+ item.mask = &tcp_mask;
+ return flow_dv_convert_modify_action(&item, modify_tcp, resource,
+ MLX5_MODIFICATION_TYPE_ADD, error);
+}
+
+/**
+ * Convert modify-header increment/decrement TCP Acknowledgment number
+ * to DV specification.
+ *
+ * @param[in,out] resource
+ * Pointer to the modify-header resource.
+ * @param[in] action
+ * Pointer to action specification.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_action_modify_tcp_ack
+ (struct mlx5_flow_dv_modify_hdr_resource *resource,
+ const struct rte_flow_action *action,
+ struct rte_flow_error *error)
+{
+ const rte_be32_t *conf = (const rte_be32_t *)(action->conf);
+ uint64_t value = rte_be_to_cpu_32(*conf);
+ struct rte_flow_item item;
+ struct rte_flow_item_tcp tcp;
+ struct rte_flow_item_tcp tcp_mask;
+
+ memset(&tcp, 0, sizeof(tcp));
+ memset(&tcp_mask, 0, sizeof(tcp_mask));
+ if (action->type == RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK)
+ /*
+ * The HW has no decrement operation, only increment operation.
+ * To simulate decrement X from Y using increment operation
+ * we need to add UINT32_MAX X times to Y.
+ * Each adding of UINT32_MAX decrements Y by 1.
+ */
+ value *= UINT32_MAX;
+ tcp.hdr.recv_ack = rte_cpu_to_be_32((uint32_t)value);
+ tcp_mask.hdr.recv_ack = RTE_BE32(UINT32_MAX);
+ item.type = RTE_FLOW_ITEM_TYPE_TCP;
+ item.spec = &tcp;
+ item.mask = &tcp_mask;
+ return flow_dv_convert_modify_action(&item, modify_tcp, resource,
+ MLX5_MODIFICATION_TYPE_ADD, error);
+}
+
+/**
+ * Validate META item.
+ *
+ * @param[in] dev
+ * Pointer to the rte_eth_dev structure.
+ * @param[in] item
+ * Item specification.
+ * @param[in] attr
+ * Attributes of flow that includes this item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_item_meta(struct rte_eth_dev *dev,
+ const struct rte_flow_item *item,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_meta *spec = item->spec;
+ const struct rte_flow_item_meta *mask = item->mask;
+ const struct rte_flow_item_meta nic_mask = {
+ .data = RTE_BE32(UINT32_MAX)
+ };
+ int ret;
+ uint64_t offloads = dev->data->dev_conf.txmode.offloads;
+
+ if (!(offloads & DEV_TX_OFFLOAD_MATCH_METADATA))
+ return rte_flow_error_set(error, EPERM,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ NULL,
+ "match on metadata offload "
+ "configuration is off for this port");
+ if (!spec)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
+ item->spec,
+ "data cannot be empty");
+ if (!spec->data)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
+ NULL,
+ "data cannot be zero");
+ if (!mask)
+ mask = &rte_flow_item_meta_mask;
+ ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_meta),
+ error);
+ if (ret < 0)
+ return ret;
+ if (attr->ingress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
+ NULL,
+ "pattern not supported for ingress");
+ return 0;
+}
+
+/**
+ * Validate vport item.
+ *
+ * @param[in] dev
+ * Pointer to the rte_eth_dev structure.
+ * @param[in] item
+ * Item specification.
+ * @param[in] attr
+ * Attributes of flow that includes this item.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_item_port_id(struct rte_eth_dev *dev,
+ const struct rte_flow_item *item,
+ const struct rte_flow_attr *attr,
+ uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_port_id *spec = item->spec;
+ const struct rte_flow_item_port_id *mask = item->mask;
+ const struct rte_flow_item_port_id switch_mask = {
+ .id = 0xffffffff,
+ };
+ uint16_t esw_domain_id;
+ uint16_t item_port_esw_domain_id;
+ int ret;
+
+ if (!attr->transfer)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ NULL,
+ "match on port id is valid only"
+ " when transfer flag is enabled");
+ if (item_flags & MLX5_FLOW_ITEM_PORT_ID)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple source ports are not"
+ " supported");
+ if (!mask)
+ mask = &switch_mask;
+ if (mask->id != 0xffffffff)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK,
+ mask,
+ "no support for partial mask on"
+ " \"id\" field");
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_port_id_mask,
+ sizeof(struct rte_flow_item_port_id),
+ error);
+ if (ret)
+ return ret;
+ if (!spec)
+ return 0;
+ ret = mlx5_port_to_eswitch_info(spec->id, &item_port_esw_domain_id,
+ NULL);
+ if (ret)
+ return rte_flow_error_set(error, -ret,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC, spec,
+ "failed to obtain E-Switch info for"
+ " port");
+ ret = mlx5_port_to_eswitch_info(dev->data->port_id,
+ &esw_domain_id, NULL);
+ if (ret < 0)
+ return rte_flow_error_set(error, -ret,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "failed to obtain E-Switch info");
+ if (item_port_esw_domain_id != esw_domain_id)
+ return rte_flow_error_set(error, -ret,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC, spec,
+ "cannot match on a port from a"
+ " different E-Switch");
+ return 0;
+}
+
+/**
+ * Validate count action.
+ *
+ * @param[in] dev
+ * device otr.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_count(struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+
+ if (!priv->config.devx)
+ goto notsup_err;
+#ifdef HAVE_IBV_FLOW_DEVX_COUNTERS
+ return 0;
+#endif
+notsup_err:
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "count action not supported");
+}
+
+/**
+ * Validate the L2 encap action.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the encap action.
+ * @param[in] attr
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_l2_encap(uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ if (!(action->conf))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "configuration cannot be null");
+ if (action_flags & MLX5_FLOW_ACTION_DROP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and encap in same flow");
+ if (action_flags & (MLX5_FLOW_ENCAP_ACTIONS | MLX5_FLOW_DECAP_ACTIONS))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can only have a single encap or"
+ " decap action in a flow");
+ if (!attr->transfer && attr->ingress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
+ NULL,
+ "encap action not supported for "
+ "ingress");
+ return 0;
+}
+
+/**
+ * Validate the L2 decap action.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] attr
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_l2_decap(uint64_t action_flags,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ if (action_flags & MLX5_FLOW_ACTION_DROP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and decap in same flow");
+ if (action_flags & (MLX5_FLOW_ENCAP_ACTIONS | MLX5_FLOW_DECAP_ACTIONS))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can only have a single encap or"
+ " decap action in a flow");
+ if (action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have decap action after"
+ " modify action");
+ if (attr->egress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
+ NULL,
+ "decap action not supported for "
+ "egress");
+ return 0;
+}
+
+/**
+ * Validate the raw encap action.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the encap action.
+ * @param[in] attr
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_raw_encap(uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ if (!(action->conf))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "configuration cannot be null");
+ if (action_flags & MLX5_FLOW_ACTION_DROP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and encap in same flow");
+ if (action_flags & MLX5_FLOW_ENCAP_ACTIONS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can only have a single encap"
+ " action in a flow");
+ /* encap without preceding decap is not supported for ingress */
+ if (!attr->transfer && attr->ingress &&
+ !(action_flags & MLX5_FLOW_ACTION_RAW_DECAP))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
+ NULL,
+ "encap action not supported for "
+ "ingress");
+ return 0;
+}
+
+/**
+ * Validate the raw decap action.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the encap action.
+ * @param[in] attr
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_raw_decap(uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ if (action_flags & MLX5_FLOW_ACTION_DROP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and decap in same flow");
+ if (action_flags & MLX5_FLOW_ENCAP_ACTIONS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have encap action before"
+ " decap action");
+ if (action_flags & MLX5_FLOW_DECAP_ACTIONS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can only have a single decap"
+ " action in a flow");
+ if (action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have decap action after"
+ " modify action");
+ /* decap action is valid on egress only if it is followed by encap */
+ if (attr->egress) {
+ for (; action->type != RTE_FLOW_ACTION_TYPE_END &&
+ action->type != RTE_FLOW_ACTION_TYPE_RAW_ENCAP;
+ action++) {
+ }
+ if (action->type != RTE_FLOW_ACTION_TYPE_RAW_ENCAP)
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
+ NULL, "decap action not supported"
+ " for egress");
+ }
+ return 0;
+}
+
+/**
+ * Find existing encap/decap resource or create and register a new one.
+ *
+ * @param dev[in, out]
+ * Pointer to rte_eth_dev structure.
+ * @param[in, out] resource
+ * Pointer to encap/decap resource.
+ * @parm[in, out] dev_flow
+ * Pointer to the dev_flow.
+ * @param[out] error
+ * pointer to error structure.
+ *
+ * @return
+ * 0 on success otherwise -errno and errno is set.
+ */
+static int
+flow_dv_encap_decap_resource_register
+ (struct rte_eth_dev *dev,
+ struct mlx5_flow_dv_encap_decap_resource *resource,
+ struct mlx5_flow *dev_flow,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_ibv_shared *sh = priv->sh;
+ struct mlx5_flow_dv_encap_decap_resource *cache_resource;
+ struct rte_flow *flow = dev_flow->flow;
+ struct mlx5dv_dr_domain *domain;
+
+ resource->flags = flow->group ? 0 : 1;
+ if (resource->ft_type == MLX5DV_FLOW_TABLE_TYPE_FDB)
+ domain = sh->fdb_domain;
+ else if (resource->ft_type == MLX5DV_FLOW_TABLE_TYPE_NIC_RX)
+ domain = sh->rx_domain;
+ else
+ domain = sh->tx_domain;
+
+ /* Lookup a matching resource from cache. */
+ LIST_FOREACH(cache_resource, &sh->encaps_decaps, next) {
+ if (resource->reformat_type == cache_resource->reformat_type &&
+ resource->ft_type == cache_resource->ft_type &&
+ resource->flags == cache_resource->flags &&
+ resource->size == cache_resource->size &&
+ !memcmp((const void *)resource->buf,
+ (const void *)cache_resource->buf,
+ resource->size)) {
+ DRV_LOG(DEBUG, "encap/decap resource %p: refcnt %d++",
+ (void *)cache_resource,
+ rte_atomic32_read(&cache_resource->refcnt));
+ rte_atomic32_inc(&cache_resource->refcnt);
+ dev_flow->dv.encap_decap = cache_resource;
+ return 0;
+ }
+ }
+ /* Register new encap/decap resource. */
+ cache_resource = rte_calloc(__func__, 1, sizeof(*cache_resource), 0);
+ if (!cache_resource)
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "cannot allocate resource memory");
+ *cache_resource = *resource;
+ cache_resource->verbs_action =
+ mlx5_glue->dv_create_flow_action_packet_reformat
+ (sh->ctx, cache_resource->reformat_type,
+ cache_resource->ft_type, domain, cache_resource->flags,
+ cache_resource->size,
+ (cache_resource->size ? cache_resource->buf : NULL));
+ if (!cache_resource->verbs_action) {
+ rte_free(cache_resource);
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, "cannot create action");
+ }
+ rte_atomic32_init(&cache_resource->refcnt);
+ rte_atomic32_inc(&cache_resource->refcnt);
+ LIST_INSERT_HEAD(&sh->encaps_decaps, cache_resource, next);
+ dev_flow->dv.encap_decap = cache_resource;
+ DRV_LOG(DEBUG, "new encap/decap resource %p: refcnt %d++",
+ (void *)cache_resource,
+ rte_atomic32_read(&cache_resource->refcnt));
+ return 0;
+}
+
+/**
+ * Find existing table jump resource or create and register a new one.
+ *
+ * @param dev[in, out]
+ * Pointer to rte_eth_dev structure.
+ * @param[in, out] resource
+ * Pointer to jump table resource.
+ * @parm[in, out] dev_flow
+ * Pointer to the dev_flow.
+ * @param[out] error
+ * pointer to error structure.
+ *
+ * @return
+ * 0 on success otherwise -errno and errno is set.
+ */
+static int
+flow_dv_jump_tbl_resource_register
+ (struct rte_eth_dev *dev,
+ struct mlx5_flow_dv_jump_tbl_resource *resource,
+ struct mlx5_flow *dev_flow,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_ibv_shared *sh = priv->sh;
+ struct mlx5_flow_dv_jump_tbl_resource *cache_resource;
+
+ /* Lookup a matching resource from cache. */
+ LIST_FOREACH(cache_resource, &sh->jump_tbl, next) {
+ if (resource->tbl == cache_resource->tbl) {
+ DRV_LOG(DEBUG, "jump table resource resource %p: refcnt %d++",
+ (void *)cache_resource,
+ rte_atomic32_read(&cache_resource->refcnt));
+ rte_atomic32_inc(&cache_resource->refcnt);
+ dev_flow->dv.jump = cache_resource;
+ return 0;
+ }
+ }
+ /* Register new jump table resource. */
+ cache_resource = rte_calloc(__func__, 1, sizeof(*cache_resource), 0);
+ if (!cache_resource)
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "cannot allocate resource memory");
+ *cache_resource = *resource;
+ cache_resource->action =
+ mlx5_glue->dr_create_flow_action_dest_flow_tbl
+ (resource->tbl->obj);
+ if (!cache_resource->action) {
+ rte_free(cache_resource);
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, "cannot create action");
+ }
+ rte_atomic32_init(&cache_resource->refcnt);
+ rte_atomic32_inc(&cache_resource->refcnt);
+ LIST_INSERT_HEAD(&sh->jump_tbl, cache_resource, next);
+ dev_flow->dv.jump = cache_resource;
+ DRV_LOG(DEBUG, "new jump table resource %p: refcnt %d++",
+ (void *)cache_resource,
+ rte_atomic32_read(&cache_resource->refcnt));
+ return 0;
+}
+
+/**
+ * Find existing table port ID resource or create and register a new one.
+ *
+ * @param dev[in, out]
+ * Pointer to rte_eth_dev structure.
+ * @param[in, out] resource
+ * Pointer to port ID action resource.
+ * @parm[in, out] dev_flow
+ * Pointer to the dev_flow.
+ * @param[out] error
+ * pointer to error structure.
+ *
+ * @return
+ * 0 on success otherwise -errno and errno is set.
+ */
+static int
+flow_dv_port_id_action_resource_register
+ (struct rte_eth_dev *dev,
+ struct mlx5_flow_dv_port_id_action_resource *resource,
+ struct mlx5_flow *dev_flow,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_ibv_shared *sh = priv->sh;
+ struct mlx5_flow_dv_port_id_action_resource *cache_resource;
+
+ /* Lookup a matching resource from cache. */
+ LIST_FOREACH(cache_resource, &sh->port_id_action_list, next) {
+ if (resource->port_id == cache_resource->port_id) {
+ DRV_LOG(DEBUG, "port id action resource resource %p: "
+ "refcnt %d++",
+ (void *)cache_resource,
+ rte_atomic32_read(&cache_resource->refcnt));
+ rte_atomic32_inc(&cache_resource->refcnt);
+ dev_flow->dv.port_id_action = cache_resource;
+ return 0;
+ }
+ }
+ /* Register new port id action resource. */
+ cache_resource = rte_calloc(__func__, 1, sizeof(*cache_resource), 0);
+ if (!cache_resource)
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "cannot allocate resource memory");
+ *cache_resource = *resource;
+ cache_resource->action =
+ mlx5_glue->dr_create_flow_action_dest_vport
+ (priv->sh->fdb_domain, resource->port_id);
+ if (!cache_resource->action) {
+ rte_free(cache_resource);
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, "cannot create action");
+ }
+ rte_atomic32_init(&cache_resource->refcnt);
+ rte_atomic32_inc(&cache_resource->refcnt);
+ LIST_INSERT_HEAD(&sh->port_id_action_list, cache_resource, next);
+ dev_flow->dv.port_id_action = cache_resource;
+ DRV_LOG(DEBUG, "new port id action resource %p: refcnt %d++",
+ (void *)cache_resource,
+ rte_atomic32_read(&cache_resource->refcnt));
+ return 0;
+}
+
+/**
+ * Get the size of specific rte_flow_item_type
+ *
+ * @param[in] item_type
+ * Tested rte_flow_item_type.
+ *
+ * @return
+ * sizeof struct item_type, 0 if void or irrelevant.
+ */
+static size_t
+flow_dv_get_item_len(const enum rte_flow_item_type item_type)
+{
+ size_t retval;
+
+ switch (item_type) {
+ case RTE_FLOW_ITEM_TYPE_ETH:
+ retval = sizeof(struct rte_flow_item_eth);
+ break;
+ case RTE_FLOW_ITEM_TYPE_VLAN:
+ retval = sizeof(struct rte_flow_item_vlan);
+ break;
+ case RTE_FLOW_ITEM_TYPE_IPV4:
+ retval = sizeof(struct rte_flow_item_ipv4);
+ break;
+ case RTE_FLOW_ITEM_TYPE_IPV6:
+ retval = sizeof(struct rte_flow_item_ipv6);
+ break;
+ case RTE_FLOW_ITEM_TYPE_UDP:
+ retval = sizeof(struct rte_flow_item_udp);
+ break;
+ case RTE_FLOW_ITEM_TYPE_TCP:
+ retval = sizeof(struct rte_flow_item_tcp);
+ break;
+ case RTE_FLOW_ITEM_TYPE_VXLAN:
+ retval = sizeof(struct rte_flow_item_vxlan);
+ break;
+ case RTE_FLOW_ITEM_TYPE_GRE:
+ retval = sizeof(struct rte_flow_item_gre);
+ break;
+ case RTE_FLOW_ITEM_TYPE_NVGRE:
+ retval = sizeof(struct rte_flow_item_nvgre);
+ break;
+ case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
+ retval = sizeof(struct rte_flow_item_vxlan_gpe);
+ break;
+ case RTE_FLOW_ITEM_TYPE_MPLS:
+ retval = sizeof(struct rte_flow_item_mpls);
+ break;
+ case RTE_FLOW_ITEM_TYPE_VOID: /* Fall through. */
+ default:
+ retval = 0;
+ break;
+ }
+ return retval;
+}
+
+#define MLX5_ENCAP_IPV4_VERSION 0x40
+#define MLX5_ENCAP_IPV4_IHL_MIN 0x05
+#define MLX5_ENCAP_IPV4_TTL_DEF 0x40
+#define MLX5_ENCAP_IPV6_VTC_FLOW 0x60000000
+#define MLX5_ENCAP_IPV6_HOP_LIMIT 0xff
+#define MLX5_ENCAP_VXLAN_FLAGS 0x08000000
+#define MLX5_ENCAP_VXLAN_GPE_FLAGS 0x04
+
+/**
+ * Convert the encap action data from list of rte_flow_item to raw buffer
+ *
+ * @param[in] items
+ * Pointer to rte_flow_item objects list.
+ * @param[out] buf
+ * Pointer to the output buffer.
+ * @param[out] size
+ * Pointer to the output buffer size.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_encap_data(const struct rte_flow_item *items, uint8_t *buf,
+ size_t *size, struct rte_flow_error *error)
+{
+ struct rte_ether_hdr *eth = NULL;
+ struct rte_vlan_hdr *vlan = NULL;
+ struct rte_ipv4_hdr *ipv4 = NULL;
+ struct rte_ipv6_hdr *ipv6 = NULL;
+ struct rte_udp_hdr *udp = NULL;
+ struct rte_vxlan_hdr *vxlan = NULL;
+ struct rte_vxlan_gpe_hdr *vxlan_gpe = NULL;
+ struct rte_gre_hdr *gre = NULL;
+ size_t len;
+ size_t temp_size = 0;
+
+ if (!items)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "invalid empty data");
+ for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
+ len = flow_dv_get_item_len(items->type);
+ if (len + temp_size > MLX5_ENCAP_MAX_LEN)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "items total size is too big"
+ " for encap action");
+ rte_memcpy((void *)&buf[temp_size], items->spec, len);
+ switch (items->type) {
+ case RTE_FLOW_ITEM_TYPE_ETH:
+ eth = (struct rte_ether_hdr *)&buf[temp_size];
+ break;
+ case RTE_FLOW_ITEM_TYPE_VLAN:
+ vlan = (struct rte_vlan_hdr *)&buf[temp_size];
+ if (!eth)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "eth header not found");
+ if (!eth->ether_type)
+ eth->ether_type = RTE_BE16(RTE_ETHER_TYPE_VLAN);
+ break;
+ case RTE_FLOW_ITEM_TYPE_IPV4:
+ ipv4 = (struct rte_ipv4_hdr *)&buf[temp_size];
+ if (!vlan && !eth)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "neither eth nor vlan"
+ " header found");
+ if (vlan && !vlan->eth_proto)
+ vlan->eth_proto = RTE_BE16(RTE_ETHER_TYPE_IPV4);
+ else if (eth && !eth->ether_type)
+ eth->ether_type = RTE_BE16(RTE_ETHER_TYPE_IPV4);
+ if (!ipv4->version_ihl)
+ ipv4->version_ihl = MLX5_ENCAP_IPV4_VERSION |
+ MLX5_ENCAP_IPV4_IHL_MIN;
+ if (!ipv4->time_to_live)
+ ipv4->time_to_live = MLX5_ENCAP_IPV4_TTL_DEF;
+ break;
+ case RTE_FLOW_ITEM_TYPE_IPV6:
+ ipv6 = (struct rte_ipv6_hdr *)&buf[temp_size];
+ if (!vlan && !eth)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "neither eth nor vlan"
+ " header found");
+ if (vlan && !vlan->eth_proto)
+ vlan->eth_proto = RTE_BE16(RTE_ETHER_TYPE_IPV6);
+ else if (eth && !eth->ether_type)
+ eth->ether_type = RTE_BE16(RTE_ETHER_TYPE_IPV6);
+ if (!ipv6->vtc_flow)
+ ipv6->vtc_flow =
+ RTE_BE32(MLX5_ENCAP_IPV6_VTC_FLOW);
+ if (!ipv6->hop_limits)
+ ipv6->hop_limits = MLX5_ENCAP_IPV6_HOP_LIMIT;
+ break;
+ case RTE_FLOW_ITEM_TYPE_UDP:
+ udp = (struct rte_udp_hdr *)&buf[temp_size];
+ if (!ipv4 && !ipv6)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "ip header not found");
+ if (ipv4 && !ipv4->next_proto_id)
+ ipv4->next_proto_id = IPPROTO_UDP;
+ else if (ipv6 && !ipv6->proto)
+ ipv6->proto = IPPROTO_UDP;
+ break;
+ case RTE_FLOW_ITEM_TYPE_VXLAN:
+ vxlan = (struct rte_vxlan_hdr *)&buf[temp_size];
+ if (!udp)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "udp header not found");
+ if (!udp->dst_port)
+ udp->dst_port = RTE_BE16(MLX5_UDP_PORT_VXLAN);
+ if (!vxlan->vx_flags)
+ vxlan->vx_flags =
+ RTE_BE32(MLX5_ENCAP_VXLAN_FLAGS);
+ break;
+ case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
+ vxlan_gpe = (struct rte_vxlan_gpe_hdr *)&buf[temp_size];
+ if (!udp)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "udp header not found");
+ if (!vxlan_gpe->proto)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "next protocol not found");
+ if (!udp->dst_port)
+ udp->dst_port =
+ RTE_BE16(MLX5_UDP_PORT_VXLAN_GPE);
+ if (!vxlan_gpe->vx_flags)
+ vxlan_gpe->vx_flags =
+ MLX5_ENCAP_VXLAN_GPE_FLAGS;
+ break;
+ case RTE_FLOW_ITEM_TYPE_GRE:
+ case RTE_FLOW_ITEM_TYPE_NVGRE:
+ gre = (struct rte_gre_hdr *)&buf[temp_size];
+ if (!gre->proto)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "next protocol not found");
+ if (!ipv4 && !ipv6)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "ip header not found");
+ if (ipv4 && !ipv4->next_proto_id)
+ ipv4->next_proto_id = IPPROTO_GRE;
+ else if (ipv6 && !ipv6->proto)
+ ipv6->proto = IPPROTO_GRE;
+ break;
+ case RTE_FLOW_ITEM_TYPE_VOID:
+ break;
+ default:
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "unsupported item type");
+ break;
+ }
+ temp_size += len;
+ }
+ *size = temp_size;
+ return 0;
+}
+
+static int
+flow_dv_zero_encap_udp_csum(void *data, struct rte_flow_error *error)
+{
+ struct rte_ether_hdr *eth = NULL;
+ struct rte_vlan_hdr *vlan = NULL;
+ struct rte_ipv6_hdr *ipv6 = NULL;
+ struct rte_udp_hdr *udp = NULL;
+ char *next_hdr;
+ uint16_t proto;
+
+ eth = (struct rte_ether_hdr *)data;
+ next_hdr = (char *)(eth + 1);
+ proto = RTE_BE16(eth->ether_type);
+
+ /* VLAN skipping */
+ while (proto == RTE_ETHER_TYPE_VLAN || proto == RTE_ETHER_TYPE_QINQ) {
+ next_hdr += sizeof(struct rte_vlan_hdr);
+ vlan = (struct rte_vlan_hdr *)next_hdr;
+ proto = RTE_BE16(vlan->eth_proto);
+ }
+
+ /* HW calculates IPv4 csum. no need to proceed */
+ if (proto == RTE_ETHER_TYPE_IPV4)
+ return 0;
+
+ /* non IPv4/IPv6 header. not supported */
+ if (proto != RTE_ETHER_TYPE_IPV6) {
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "Cannot offload non IPv4/IPv6");
+ }
+
+ ipv6 = (struct rte_ipv6_hdr *)next_hdr;
+
+ /* ignore non UDP */
+ if (ipv6->proto != IPPROTO_UDP)
+ return 0;
+
+ udp = (struct rte_udp_hdr *)(ipv6 + 1);
+ udp->dgram_cksum = 0;
+
+ return 0;
+}
+
+/**
+ * Convert L2 encap action to DV specification.
+ *
+ * @param[in] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[in] action
+ * Pointer to action structure.
+ * @param[in, out] dev_flow
+ * Pointer to the mlx5_flow.
+ * @param[in] transfer
+ * Mark if the flow is E-Switch flow.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_create_action_l2_encap(struct rte_eth_dev *dev,
+ const struct rte_flow_action *action,
+ struct mlx5_flow *dev_flow,
+ uint8_t transfer,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item *encap_data;
+ const struct rte_flow_action_raw_encap *raw_encap_data;
+ struct mlx5_flow_dv_encap_decap_resource res = {
+ .reformat_type =
+ MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TO_L2_TUNNEL,
+ .ft_type = transfer ? MLX5DV_FLOW_TABLE_TYPE_FDB :
+ MLX5DV_FLOW_TABLE_TYPE_NIC_TX,
+ };
+
+ if (action->type == RTE_FLOW_ACTION_TYPE_RAW_ENCAP) {
+ raw_encap_data =
+ (const struct rte_flow_action_raw_encap *)action->conf;
+ res.size = raw_encap_data->size;
+ memcpy(res.buf, raw_encap_data->data, res.size);
+ if (flow_dv_zero_encap_udp_csum(res.buf, error))
+ return -rte_errno;
+ } else {
+ if (action->type == RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP)
+ encap_data =
+ ((const struct rte_flow_action_vxlan_encap *)
+ action->conf)->definition;
+ else
+ encap_data =
+ ((const struct rte_flow_action_nvgre_encap *)
+ action->conf)->definition;
+ if (flow_dv_convert_encap_data(encap_data, res.buf,
+ &res.size, error))
+ return -rte_errno;
+ }
+ if (flow_dv_encap_decap_resource_register(dev, &res, dev_flow, error))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "can't create L2 encap action");
+ return 0;
+}
+
+/**
+ * Convert L2 decap action to DV specification.
+ *
+ * @param[in] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[in, out] dev_flow
+ * Pointer to the mlx5_flow.
+ * @param[in] transfer
+ * Mark if the flow is E-Switch flow.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_create_action_l2_decap(struct rte_eth_dev *dev,
+ struct mlx5_flow *dev_flow,
+ uint8_t transfer,
+ struct rte_flow_error *error)
+{
+ struct mlx5_flow_dv_encap_decap_resource res = {
+ .size = 0,
+ .reformat_type =
+ MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TUNNEL_TO_L2,
+ .ft_type = transfer ? MLX5DV_FLOW_TABLE_TYPE_FDB :
+ MLX5DV_FLOW_TABLE_TYPE_NIC_RX,
+ };
+
+ if (flow_dv_encap_decap_resource_register(dev, &res, dev_flow, error))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "can't create L2 decap action");
+ return 0;
+}
+
+/**
+ * Convert raw decap/encap (L3 tunnel) action to DV specification.
+ *
+ * @param[in] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[in] action
+ * Pointer to action structure.
+ * @param[in, out] dev_flow
+ * Pointer to the mlx5_flow.
+ * @param[in] attr
+ * Pointer to the flow attributes.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_create_action_raw_encap(struct rte_eth_dev *dev,
+ const struct rte_flow_action *action,
+ struct mlx5_flow *dev_flow,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_raw_encap *encap_data;
+ struct mlx5_flow_dv_encap_decap_resource res;
+
+ encap_data = (const struct rte_flow_action_raw_encap *)action->conf;
+ res.size = encap_data->size;
+ memcpy(res.buf, encap_data->data, res.size);
+ res.reformat_type = attr->egress ?
+ MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TO_L3_TUNNEL :
+ MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L3_TUNNEL_TO_L2;
+ if (attr->transfer)
+ res.ft_type = MLX5DV_FLOW_TABLE_TYPE_FDB;
+ else
+ res.ft_type = attr->egress ? MLX5DV_FLOW_TABLE_TYPE_NIC_TX :
+ MLX5DV_FLOW_TABLE_TYPE_NIC_RX;
+ if (flow_dv_encap_decap_resource_register(dev, &res, dev_flow, error))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "can't create encap action");
+ return 0;
+}
+
+/**
+ * Validate the modify-header actions.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the modify action.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_modify_hdr(const uint64_t action_flags,
+ const struct rte_flow_action *action,
+ struct rte_flow_error *error)
+{
+ if (action->type != RTE_FLOW_ACTION_TYPE_DEC_TTL && !action->conf)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ NULL, "action configuration not set");
+ if (action_flags & MLX5_FLOW_ENCAP_ACTIONS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have encap action before"
+ " modify action");
+ return 0;
+}
+
+/**
+ * Validate the modify-header MAC address actions.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the modify action.
+ * @param[in] item_flags
+ * Holds the items detected.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_modify_mac(const uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ int ret = 0;
+
+ ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
+ if (!ret) {
+ if (!(item_flags & MLX5_FLOW_LAYER_L2))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "no L2 item in pattern");
+ }
+ return ret;
+}
+
+/**
+ * Validate the modify-header IPv4 address actions.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the modify action.
+ * @param[in] item_flags
+ * Holds the items detected.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_modify_ipv4(const uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ int ret = 0;
+
+ ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
+ if (!ret) {
+ if (!(item_flags & MLX5_FLOW_LAYER_L3_IPV4))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "no ipv4 item in pattern");
+ }
+ return ret;
+}
+
+/**
+ * Validate the modify-header IPv6 address actions.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the modify action.
+ * @param[in] item_flags
+ * Holds the items detected.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_modify_ipv6(const uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ int ret = 0;
+
+ ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
+ if (!ret) {
+ if (!(item_flags & MLX5_FLOW_LAYER_L3_IPV6))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "no ipv6 item in pattern");
+ }
+ return ret;
+}
+
+/**
+ * Validate the modify-header TP actions.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the modify action.
+ * @param[in] item_flags
+ * Holds the items detected.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_modify_tp(const uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ int ret = 0;
+
+ ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
+ if (!ret) {
+ if (!(item_flags & MLX5_FLOW_LAYER_L4))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "no transport layer "
+ "in pattern");
+ }
+ return ret;
+}
+
+/**
+ * Validate the modify-header actions of increment/decrement
+ * TCP Sequence-number.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the modify action.
+ * @param[in] item_flags
+ * Holds the items detected.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_modify_tcp_seq(const uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ int ret = 0;
+
+ ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
+ if (!ret) {
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_TCP))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "no TCP item in"
+ " pattern");
+ if ((action->type == RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ &&
+ (action_flags & MLX5_FLOW_ACTION_DEC_TCP_SEQ)) ||
+ (action->type == RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ &&
+ (action_flags & MLX5_FLOW_ACTION_INC_TCP_SEQ)))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "cannot decrease and increase"
+ " TCP sequence number"
+ " at the same time");
+ }
+ return ret;
+}
+
+/**
+ * Validate the modify-header actions of increment/decrement
+ * TCP Acknowledgment number.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the modify action.
+ * @param[in] item_flags
+ * Holds the items detected.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_modify_tcp_ack(const uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ int ret = 0;
+
+ ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
+ if (!ret) {
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_TCP))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "no TCP item in"
+ " pattern");
+ if ((action->type == RTE_FLOW_ACTION_TYPE_INC_TCP_ACK &&
+ (action_flags & MLX5_FLOW_ACTION_DEC_TCP_ACK)) ||
+ (action->type == RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK &&
+ (action_flags & MLX5_FLOW_ACTION_INC_TCP_ACK)))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "cannot decrease and increase"
+ " TCP acknowledgment number"
+ " at the same time");
+ }
+ return ret;
+}
+
+/**
+ * Validate the modify-header TTL actions.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the modify action.
+ * @param[in] item_flags
+ * Holds the items detected.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_modify_ttl(const uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ int ret = 0;